Cromax 42CrMo4
Cromax 42CrMo4
Cromax 42CrMo4
Fundia Cromax AB
Flhagsleden 57
SE-753 23 UPPSALA
Sweden
Tel. +46 18 60 60 90
CROMAX 42CrMo4
Fax. +46 18 60 60 99
Fundia Cromax S.p.A. EUR 730 million. Fundia is part of the Rautaruukki Group, the largest steel producer
Via F.Turati, 11 in the Nordic region.
I- 40062 MOLINELLA (BO)
Italy
Tel. +39 051 69 00 332
Fax. +39 051 88 04 82 Fundia Cromax is the major manufacturer in Europe of hard-chrome plated products in
the form of bar and tube. The Cromax Group comprises five modern production units,
www.fundia.com
two in Sweden and one in each of Holland, France and Italy.
The majority of the hot-rolled bar requirements for Cromax manufacture is supplied by
Fundias own steel production units. The high and reproducible quality and superior
mechanical characteristics of Cromax products are to a large extent attributable to a com-
plete control over the entire manufacturing chain from steel production via mechanical pro-
cessing and hard-chrome plating to finished hard-chrome plated bar.
Fundia Cromax has about 200 employees and a turnover of EUR 45 million.
Quenched-and-tempered Cromax 42CrMo4 is manufactured Average chemical analysis Cromax 42CrMo4 Machinability Packaging
from the standard low-alloy chromium-molybdenum steel. The Cromax 42CrMo4 can be supplied with three different packaging
C% Si % Mn % S% Cr % Mo %
product finds application where there is a requirement for ele- 0.42 0.25 0.80 0.02 1.05 0.20 40 options:
vated strength in combination with a defined and high level of Paper tubes with the characteristic blue and yellow
toughness. spiral stripes.
Green plastic sleeve, which can be left on as protection
Corresponding standards during piston-rod production.
The table shows the closest equivalent standard for the steel in Cromax 42CrMo4.
10 Plastic spacer rings.
For the two latter alternatives, the bars are normally packed in a
We reserve the right to make changes to dimensions, tolerances and other data
given in this sheet.
Quenched-and-tempered Cromax 42CrMo4 is manufactured Average chemical analysis Cromax 42CrMo4 Machinability Packaging
from the standard low-alloy chromium-molybdenum steel. The Cromax 42CrMo4 can be supplied with three different packaging
C% Si % Mn % S% Cr % Mo %
product finds application where there is a requirement for ele- 0.42 0.25 0.80 0.02 1.05 0.20 40 options:
vated strength in combination with a defined and high level of Paper tubes with the characteristic blue and yellow
toughness. spiral stripes.
Green plastic sleeve, which can be left on as protection
Corresponding standards during piston-rod production.
The table shows the closest equivalent standard for the steel in Cromax 42CrMo4.
10 Plastic spacer rings.
For the two latter alternatives, the bars are normally packed in a
We reserve the right to make changes to dimensions, tolerances and other data
given in this sheet.