Specification E 302 - Generator Transformer 1
Specification E 302 - Generator Transformer 1
Specification E 302 - Generator Transformer 1
NAME OF BIDDER
Schedule 7.2 OPERATION AND CONSTRUCTION DATA Insert all data in tbese columns
The Bidder shall submit the following : *)
TRANSFORMER NAME :
1. Manufacturer...................................................................: B&D Transformer
3. Phase...............................................................................: 3
NAME OF BIDDER
Schedule 7.2 OPERATION AND CONSTRUCTION Insert all data in tbese columns
DATA
13. Applied potential test..................................(kV): 38 28
14. Induced potential test :
a. Line-to-neutral........................................(kV): 325 (Line to Gnd) N/A
b. Line-to-line.............................................(kV): 270 22
18. Bushing :
a. Insulation class......................................(kV): 170 36
b. Rated continuous current........................(A): 1200 3150
c. Basic impulse insulation level (BIL)....(kV): 750 170
d. Maximum design voltage to ground.....(kV): 98 36
e. Minimum creepage..............................(mm): 5270 920
f. Withstand test :
f.1 Dry (1 Minute)................................(kV): 355 70
f.2 Wet (10 Seconds)............................(kV): TBA TBA
g. Wet switching surge value...............(kV): 600 136
NAME OF BIDDER
Schedule 7.2 OPERATION AND CONSTRUCTION Insert all data in tbese columns
DATA
f. Withstand test :
f.1 Dry (1 minute).....................................(kV): 95 N/A
f.2 Wet (10 seconds).................................(kV): TBA N/A
20. Air core reactance based on full load ONAF rating at TBA
65C at rated voltage tap as viewed from the high voltage
terrminals..............................(H):
21. Air core reactance based on full load ONAF rating at TBA
65C at rated voltage tap as viewed from the high voltage
terrminals..............................(H):
voltage connection)..............................(Ohm):
TBA