Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 187 views

    Assignment11 PDF

    Uploaded by

    manish
    The document discusses rectangular waveguides and modes of propagation. It provides 18 multiple choice questions regarding cutoff frequencies, modes of propagation, field components, and other properties of rectangular waveguides operating at different frequencies and dimensions. The questions cover topics such as the number of TE and TM modes possible based on waveguide dimensions, identifying modes based on field expressions, calculating cutoff frequencies and phase constants, and determining intrinsic impedances and power flows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Assignment11 PDF

    Uploaded by

    manish
    187 views4 pages
    The document discusses rectangular waveguides and modes of propagation. It provides 18 multiple choice questions regarding cutoff frequencies, modes of propagation, field components, and other properties of rectangular waveguides operating at different frequencies and dimensions. The questions cover topics such as the number of TE and TM modes possible based on waveguide dimensions, identifying modes based on field expressions, calculating cutoff frequencies and phase constants, and determining intrinsic impedances and power flows.

    Original Title

    Assignment11.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses rectangular waveguides and modes of propagation. It provides 18 multiple choice questions regarding cutoff frequencies, modes of propagation, field components, and other properties of rectangular waveguides operating at different frequencies and dimensions. The questions cover topics such as the number of TE and TM modes possible based on waveguide dimensions, identifying modes based on field expressions, calculating cutoff frequencies and phase constants, and determining intrinsic impedances and power flows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    187 views4 pages

    Assignment11 PDF

    Uploaded by

    manish
    The document discusses rectangular waveguides and modes of propagation. It provides 18 multiple choice questions regarding cutoff frequencies, modes of propagation, field components, and other properties of rectangular waveguides operating at different frequencies and dimensions. The questions cover topics such as the number of TE and TM modes possible based on waveguide dimensions, identifying modes based on field expressions, calculating cutoff frequencies and phase constants, and determining intrinsic impedances and power flows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    ASSIGNMENT 11

    1.A rectangular waveguide with dimensions a = 2.5 cm, b = 1 cm is to


    operate below 15.1 GHz. The no. of TE mode that can be possible if the
    guide is filled with a medium characterized by = 0, = 40 , = 1?

    Ans=11
    2. In the above question The no of TM modes that can be possible are
    Ans=4
    3. In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, = 0, =
    40 , = 1 , = 2 sin(x/a)cos (3y/b) sin(*1011 z) A/m
    The mode of operation is
    (a)11 (b) 13 (c) 11 (d) 21
    4.In the above question the value of cutoff frequency and phase
    constant are
    (a) 28.57 GHz and 1718.81 rad/m
    (b) 81.55 GHz and 1718.81 rad/m
    (c) 28.57 GHz and 718.81 rad/m
    (d) 81.55 GHz and 718.81 rad/m
    5. In question no3. The value of intrinsic wave impedance is
    (a) 377 (b) 277 (c) 154.7 (d) None of these
    6. The lower cut-off frequency of a rectangular wave guide with inside
    dimensions
    (3 4.5 cm) operating at 10 GHz is
    (A) 10 GHz. (B) 9 GHz.
    (C) 10/9 GHz (d) 10/3 GHz

    7. For a rectangular wave guide, 2.5cm x 1.2cm, dominant cut off


    wavelength is
    (A) 5 cm (B) 2.5 cm
    (C) 2.4 cm (D) 3.7 cm
    Ans: A

    8. A rectangular waveguide has dimension 1.0 cm0.5 cm, its cutoff


    frequency for the dominant mode is

    (A) 5 GHz (B) 10 GHz


    (C) 15 GHz (D) 20 GHz

    9.An air-filled rectangular waveguide of dimensions a = 4 cm, b = 2 cm


    transports energy in the dominant mode at a rate of 2 mW. If the
    frequency of operation is 10 GHz, the peak value of the electric field in
    the waveguide is
    (a) 28.93 V/m (b) 37.92 V/m (c) 63.77 V/m (d) 127.34 V/m

    10. An air-filled rectangular waveguide has dimensions a = 2 cmand b =


    1 cm.The range of frequencies over which the guide will operate single
    mode (10 ) is
    (a) 2.5 GHz < f < 15 GHz.
    (b) 3.5 GHz < f < 12 GHz.
    (c) 3.5 GHz < f < 15 GHz
    (d) 7.5 GHz < f < 15 GHz
    11. An evanscent mode occurs when
    (a) A wave is attenuated rather than propagated.
    (b) The propagation constant is purely imaginary.
    (c) m = 0 = n so that all field components vanish.
    (d) The wave frequency is the same as the cutoff frequency.
    12. An air-filled rectangular waveguide has cross-sectional dimensions a
    = 6 cm and b = 3 cm. Given that
    = 5 sin(2x/a)sin (3y/b) cos(1012 z) A/m
    the intrinsic impedance of this mode and the average power flow in
    the guide are
    (a) 375.1 and 0.84 W
    (b) 375.1 and 1.58 W
    (c) 237.1 and 0.85 W
    (d) None of these

    13. A 1-cm X 3-cm rectangular air-filled waveguide operates in the 12


    mode at a frequency that is 20% higher than the cutoff frequency. the
    operating frequency is
    (a) 56.75 GHz
    (b) 12.92 GHz
    (c) 19.09 GHz
    (d) 21.63 GHz

    14. In the above question The phase and group velocities are
    respectively
    (a) 5.43 108 m/s and 1.66 108 m/s
    (b) 7.43 108 m/s and 1.66 108 m/s
    (c) 5.43 108 m/s and 7.66 108 m/s
    (d) None of these

    15. A rectangular waveguide is filled with polyethylene (= 2.250 ) and


    operates at 24 GHz. If the cutoff frequency of a certain TE mode is 16
    GHz, the group velocity and intrinsic impedance of the mode are
    respectively
    (a) 5.43 108 m/s and 237.1
    (b) 1.43 108 m/s and 237.1
    (c) 1.49 108 m/s and 337.2
    (d) None of these
    16. When the electric field is at its maximum value, the magnetic
    energy of a cavity is
    (a) At its maximum value
    (b) At 1/2 of its maximum value
    (c) At its minimum value
    (d) Zero

    17.In a rectangular waveguide for which a = 2b, the cutoff frequency for
    02 mode is 12 GHz, the cutoff frequency for 11 mode is
    (a)3 GHz
    (b) 35GHz
    (c) 12 GHz
    (d) 65GHz

    18. For 30 mode, which of the following field components exist?


    (a) (b) (c) (d)

    You might also like