Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Solartech PE 55

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

International Limited

SolarTech PE 55
UV CURING COMPOSITES Multi-purpose Polyester Laminate

Product Information Leaflet

SOLARTECH PE 55 is a UV Curing GRP (Glass Re-


inforced Plastic) Laminate containing high grade Isophthalic
Polyester resins, fillers and glass re-inforcements which
has been formulated to ensure excellent protection against
corrosion, abrasion, impact and aggressive climatic
environments.

SOLARTECH PE 55 is suitable for use on a wide range of


substrates including steel, concrete, GRP, FRP, PVC glass
and wood. The product is supplied on rolls and in its un-
cured state is a soft, maleable, easy to use material ready
for application. The material can be easily cut to any shape
using knives or scissors. Once fully cured SolarTech PE
55 also provides top quality fire retardancy and low smoke
emissions if exposed to flame.

SOLARTECH PE 55 is highly recommended for use as


protection to all types of insulation and also as a non-
metallic cladding product.

The ability to offer user friendly, one component,


fast curing, seamless on site applications has
attracted many clients to use the SolarTech UV Curing
technology.

Typical Applications:

All types of Insulation Protection


Storage Tanks
Pipe Support Protection
Roofs
Flooring
Water and Weatherproofing
General maintenance
And many others....
SolarTech PE 55
Product Data
Appearance Sheet Lamination
Colour Grey
Mix Ratio One Component
Curing Mechanism Ultra Violet (UV). Natural or UV Lamp
Material Thickness 1.7 - 1.9 mm. Material can also be supplied in the 1mm - 1.5 mm range
Weight 2.9kg/m2
Packaging Standard Roll 10mx0.92m packed in cardboard box
Technical Data
Typical Values Test Method
Tensile strength 55 Mpa BS 2782 - 1994
Flexural strength > 130 Mpa ASTM D790 - 03
Flexural Modulus 5.98 Gpa ASTM D2344
Elongation at break > 3% BS 2782 - 1994
Coeff. Of Thermal expansion 2.9 10-5 Degree C ASTM D696-03
Impact resistance > 60 Kj/sqm BS EN ISO 180
Hardness > 60 Barcol ASTM D2583-01
Compression strength > 200 Mpa ASTM D695-2002a
Adhesion to steel > 14 Mpa ASTM D4541-02
Water Vapour Permeability 0.28g/m2/24h/mmHg ASTM E96
Heat distortion > 145 Deg C ASTM D648
Fire rating Class 1 BS 476 pt 7:1997, ASTM E84
Flash Point > 32 Deg C ASTM D93
Heat resistance Wet: 90 deg C Dry: 200 Deg C
Chemical resistance Good. Chemical resistance chart available on request
Electrical Properties Dielectric strength: 9KV/mm as per IEC 243
Arc resistance: greater than 180 seconds as per ASTM D495
Tracking resistance: greater than 600 volts as per IEC 112
Insulation resistance: 10 to the power of 13 ohms as per IEC 93
Application Data
Please refer to the SolarTech Sheet Laminate Information for Use leaflet.
Available from your Solartech agent or from Solartech web site www.solartechuv.com
Handling / Storage
Working life Vigilant care should be taken to shield SolarTech PE 55 from direct sunlight or UV lamps during
application as this will greatly reduce the working life of the material.
Environment Under no circumstances should SolarTech be applied in wet conditions or on wet substrates.
Safety Precautions Please refer to the product Material Safety Data Sheets for detailed information on handling,
shipping and disposal.
Storage Store in cool, dry conditions ( not more than 25 Deg C ). Avoid storage near any heat source or
sunlight. Always store material in its original packing in a horizontal position. Boxed material should
be rotated 180 deg. Every 30 days for optimum condition.
Shelf Life 12 months when stored as per manufacturers instructions.

SOLARTECH Agent:

International Limited
P.O. Box 54992
Dubai Airport Free Zone,
Dubai, United Arab Emirates
Tel: + 971 4 6091932 Fax: + 971 4 6091933
email: info@solartech.ae
web: www.solartechuv.com

DISCLAIMER : The information contained herein is to the best of our knowledge accurate and is given in good faith without warranty. Users are
deemed to have satisfied themselves independently as to the suitability of our products for their particular purpose. In no event shall SolarTech
International Limited be liable for consequent or incidental damages.

You might also like