Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28K views

    Pipe Fittings Surface Area

    Uploaded by

    B Girish
    This document provides rates for surface preparation and painting of piping elements of various sizes. It includes the surface area and coating rates in man-hours per square meter for pipes, elbows, tees, reducers, flanges, and valves from 1/2 inch to 60 inches in diameter. It also provides formulas for calculating material consumption and coating rates per square foot or linear foot based on the man-hours per square meter. The purpose is to estimate productivity and efficiency for corrosion protection of piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pipe Fittings Surface Area

    Uploaded by

    B Girish
    28K views1 page
    This document provides rates for surface preparation and painting of piping elements of various sizes. It includes the surface area and coating rates in man-hours per square meter for pipes, elbows, tees, reducers, flanges, and valves from 1/2 inch to 60 inches in diameter. It also provides formulas for calculating material consumption and coating rates per square foot or linear foot based on the man-hours per square meter. The purpose is to estimate productivity and efficiency for corrosion protection of piping systems.

    Original Description:

    Pipe Fittings Surface Area

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Read this document in other languages

    Did you find this document useful?

    Is this content inappropriate?

    This document provides rates for surface preparation and painting of piping elements of various sizes. It includes the surface area and coating rates in man-hours per square meter for pipes, elbows, tees, reducers, flanges, and valves from 1/2 inch to 60 inches in diameter. It also provides formulas for calculating material consumption and coating rates per square foot or linear foot based on the man-hours per square meter. The purpose is to estimate productivity and efficiency for corrosion protection of piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28K views1 page

    Pipe Fittings Surface Area

    Uploaded by

    B Girish
    This document provides rates for surface preparation and painting of piping elements of various sizes. It includes the surface area and coating rates in man-hours per square meter for pipes, elbows, tees, reducers, flanges, and valves from 1/2 inch to 60 inches in diameter. It also provides formulas for calculating material consumption and coating rates per square foot or linear foot based on the man-hours per square meter. The purpose is to estimate productivity and efficiency for corrosion protection of piping systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    VII.

    CORROSION PROTECTION Productivity Efficiency Percentage (PEP) = 80%

    1. SAND BLASTING AND SURFACE AREA OF PIPING ELEMENTS RATES FOR PIPES
    PAINTING OF PIPING Pipe Elbow TEE Reducer Flange Valve Blast and Two Middle Covering TOTAL TOTAL
    1m r=1,5d First Coat Coats Coat Four Coats Four Coats
    Dn-mm -Inch OD-mm [m2] [m2] [m2] [m2] [m2] [m2] [Mhr/m2] [Mhr/m2 ] [Mhr/m2] [Mhr /m 2] [Mhr/m] -Inch
    15 1/2 21,3 0,067 0,003 0,003 0,002 0,012 0,030 1/2
    20 3/4 26,7 0,083 0,005 0,004 0,003 0,017 0,036 3/4
    25 1 33,4 0,105 0,008 0,007 0,005 0,020 0,043 1
    32 1 1/4 42,2 0,132 0,013 0,011 0,006 0,023 0,054 1 1/4
    40 1 1/2 48,3 0,151 0,017 0,015 0,009 0,030 0,065 1 1/2
    50 2 60,3 0,19 0,027 0,023 0,013 0,035 0,147 2
    65 2 1/2 73 0,24 0,039 0,035 0,019 0,046 0,185 2 1/2
    80 3 88,9 0,28 0,058 0,050 0,022 0,056 0,173 3
    100 4 114,3 0,36 0,097 0,082 0,033 0,080 0,297 4
    125 5 141,3 0,44 0,120 0,124 0,050 0,096 0,390 5
    150 6 168,3 0,53 0,210 0,178 0,067 0,120 0,460 6
    200 8 219,1 0,69 0,472 0,302 0,094 0,170 0,660 8
    250 10 273 0,86 0,552 0,470 0,138 0,230 0,890 10
    300 12 323,9 1,02 0,776 0,661 0,186 0,260 1,190 12
    350 14 355,6 1,12 0,936 0,797 0,333 0,300 1,570 14
    400 16 406,4 1,28 1,222 1,040 0,410 0,350 1,790 16
    450 18 457 1,43 1,545 1,307 0,490 0,390 2,220 18
    103

    500 20 508 1,60 1,910 1,626 0,732 0,420 2,520 20


    550 22 559 1,75 2,312 1,957 0,800 0,460 3,220 22
    600 24 610 1,92 2,754 2,342 0,878 0,490 3,920 24
    650 26 660 2,07 3,223 2,732 1,136 0,520 3,800 26
    700 28 711 2,24 3,741 3,185 1,230 0,560 3,850 28
    750 30 762 2,39 4,297 3,642 1,312 0,600 4,330 30
    800 32 813 2,56 4,891 4,163 1,405 0,630 4,820 32
    850 34 864 2,71 5,524 4,683 1,488 0,670 5,320 34
    900 36 914 2,88 6,182 5,265 1,581 0,700 5,820 36
    950 38 965 3,03 6,891 5,848 1,663 0,740 6,450 38
    1000 40 1016 3,20 7,639 6,502 1,757 0,780 7,100 40
    1050 42 1067 3,35 7,639 7,149 2,144 0,800 42
    1100 44 1118 3,52 8,425 7,871 2,252 0,840 44
    1150 46 1168 3,66 10,095 8,550 2,342 0,980 46
    1200 48 1219 3,83 10,996 9,338 2,451 0,920 48
    1350 54 1372 4,31 13,930 11,827 2,758 1,020 54
    1500 60 1524 4,79 17,187 14,600 3,065 1,120 60

    1.1 RATES FOR PIPING ELEMENTS 1.2 MATERIAL CONSUMPTION - acc. to Item 2 (page 104)
    - Pipes: above table - Reducers: [Mhr/m2 ]x
    [Mhr/m2 ]x [Mhr/m2 ]x
    2
    - Elbows: - Flanges: m x 10764 = sq ft
    - Tees: [Mhr/m2 ]x - Valves: [Mhr/m 2]x Mhr/m2 x 0,0929 = Mhr/sq ft
    Mhr/m x 0,3048 = Mhr/ft

    You might also like