7400
7400
7400
September 1986
Revised July 2001
DM7400
Quad 2-Input NAND Gates
General Description
This device contains four independent gates each of which
performs the logic NAND function.
Ordering Code:
Order Number Package Number Package Description
DM7400M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
DM7400N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter X to the ordering code.
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Typ
Symbol Parameter Conditions Min Max Units
(Note 2)
VI Input Clamp Voltage VCC = Min, II = 12 mA 1.5 V
VOH HIGH Level VCC = Min, IOH = Max
2.4 3.4 V
Output Voltage VIL = Max
VOL LOW Level VCC = Min, IOL = Max
0.2 0.4 V
Output Voltage VIH = Min
II Input Current @ Maximum Input Voltage VCC = Max, VI = 5.5V 1 mA
IIH HIGH Level Input Current VCC = Max, VI = 2.4V 40 A
IIL LOW Level Input Current VCC = Max, VI = 0.4V 1.6 mA
IOS Short Circuit Output Current VCC = Max (Note 3) 18 55 mA
ICCH Supply Current with Outputs HIGH VCC = Max 4 8 mA
ICCL Supply Current with Outputs LOW VCC = Max 12 22 mA
Note 2: All typicals are at VCC = 5V, TA = 25C.
Note 3: Not more than one output should be shorted at a time.
Switching Characteristics
at VCC = 5V and TA = 25C
Symbol Parameter Conditions Min Max Units
tPLH Propagation Delay Time CL = 15 pF
22 ns
LOW-to-HIGH Level Output RL = 400
tPHL Propagation Delay Time
15 ns
HIGH-to-LOW Level Output
www.fairchildsemi.com 2
DM7400
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
3 www.fairchildsemi.com
DM7400 Quad 2-Input NAND Gates
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the device or system whose failure to perform can be rea-
body, or (b) support or sustain life, and (c) whose failure sonably expected to cause the failure of the life support
to perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the www.fairchildsemi.com
user.
www.fairchildsemi.com 4