Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 358 views

    Equalizing Valve Standing Schlumberber

    Uploaded by

    Guiver Suarez V.
    VAlvula Equalizadora para produccion

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Equalizing Valve Standing Schlumberber

    Uploaded by

    Guiver Suarez V.
    358 views2 pages
    VAlvula Equalizadora para produccion

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    VAlvula Equalizadora para produccion

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    358 views2 pages

    Equalizing Valve Standing Schlumberber

    Uploaded by

    Guiver Suarez V.
    VAlvula Equalizadora para produccion

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    A-2- and M-Series Equalizing

    Standing Valves
    The A-2- and M-series equalizing standing valves are
    slickline-retrievable, ball-and-seat-type check valves Configuration
    for 312 in. and

    with integral running and pulling necks designed to Below

    hold pressure only from above.


    applications Equalizing standing valves are used in intermittent gas lift wells to
    Flow control in single and dual
    contain fluid in the tubing string during an injection cycle. They are
    completions with gas lift also used to set packers and test the tubing string.
    Packer setting tool

    Both the A-2- and the M-series equalizing standing valves run in
    Tubing testing tool
    A- series seating nipples and allow pressure to be equalized before
    they are retrieved from the nipple. The M- series equalizing standing
    benefit valves are similar to the A-2-series valves. The main difference is that
    Holds pressure applied above

    the M-series valves employ a collet-type hold-down that anchors


    the valve and allows flow from the valve and prevents it from being unseated by upward flow. The
    below the valve M-1 and the M1-DS valves feature a longer packing barrel than the
    Configuration
    features other M-series valves. The longer packing barrels enable them to be for 412 in. and
    External fishing neck

    set in D or DS nipples, respectively. M1-DS valves can also be set in Above


    specific sizes of A- series seating nipples.
    Integral equalizing device

    Available in various materials

    Description and operation


    Reliable, field-proven design
    The A-2- or M-series equalizing standing valve is installed in the well
    Rugged construction with

    using standard slickline methods. The appropriate JD-series pulling


    a large flow area tool and attached standing valve are lowered into the tubing until the
    assembly shoulders against the packing bore of the nipple. The valve
    packing seals in the polished section. Downward jarring releases the
    JD pulling tool for retrieval to the surface.
    When removing the equalizing standing valve, upward jarring with
    the appropriate JD-series pulling tool equalizes and removes the
    assembly.

    A-2 Equalizing Standing Valves


    A-2- and M-Series Equalizing Standing Valves
    A-2- and M-Series Equalizing Standing Valves Specifications
    Type No-Go OD (in. [mm]) Packing OD (in. [mm]) Fishing Neck Size Running and
    (in. [mm]) Pulling Tool
    1.250 [31.8] 1.187 [30.1]
    A-2
    1.312 [33.3] 1.250 [31.8]
    M 1.312 [33.3] 1.250 [31.8]
    A-2 1.480 [37.6] 1.437 [36.5]
    M 1.500 [38.1] 1.437 [36.5] 0.875 [22.2] 114-in JDS
    1.485 [37.7] 1.437 [36.5]
    M-1
    1.610 [40.9] 1.562 [39.7]
    1.610 [40.9] 1.562 [39.7]
    A-2 1.687 [42.8] 1.625 [41.3]
    1.859 [47.2] 1.812 [46.0] 1.375 [34.9]
    M-1 1.874 [47.6] 1.812 [46.0]
    M 1.859 [47.2] 1.812 [46.0]
    M-1 DS 1.895 [48.1] 1.875 [47.6]
    1.375 [34.9] 2-in. JDS
    A-2 2.296 [58.3] 2.250 [57.2]
    M 2.296 [58.3] 2.250 [57.2]
    M-1 2.296 [58.3] 2.250 [57.2]
    M-1 DS 2.345 [59.6] 2.312 [58.7] 1.375 [34.9]
    IN 2.795 [71.0] 2.750 [69.9]
    M-1 2.795 [71.0] 2.750 [69.9]
    M1-DS 2.856 [72.5] 2.812 [71.4]
    3.370 [85.6] 3.312 [84.1]
    3.540 [89.9] 3.437 [87.3]
    3.672 [93.3] 3.625 [92.1] 2.312 [58.7] 3-in. JDS
    3.735 [94.9] 3.687 [93.6]
    A-2
    3.785 [96.1] 3.750 [95.3]
    3.843 [97.6] 3.813 [96.9]
    3.937 [100.0] 3.875 [98.9]
    4.545 [115.4] 4.500 [114.3]
    Other sizes are available on request. Contact your local Schlumberger representative.

    www.slb.com/completions

    Copyright 2008 Schlumberger. All rights reserved. 08-CO-066

    You might also like