Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

A Review On Variable Compression Diesel Engine With Turmeric Leaf Oil-Based Biodiesel

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015

ISSN 2091-2730

A Review on Variable Compression Diesel Engine with Turmeric Leaf


Oil-based Biodiesel
Ankit K. Bawaskar[1], Prof. C. S. Choudhari[2]

M. E. Automotive Engineering, AISSMS COE, Pune [1]


Asst. Professor, Mechanical Engineering, AISSMS COE, Pune [2]

Mob. no.: +91-9766468743


e-mail_id: ankitkbawaskar.444@gmail.com

Abstract The rapid depleting ores of petroleum, sharply escalating fuel prices and the environmental problems have triggered the
need of alternatives and renewable energy sources. The situation is even graver in developing countries such as India. Currently, India
ranks the second largest by population in the world as well as places herself second in the list of petroleum consumers. India imports
70% of the required fuel and spends around 30% of her foreign exchange over it. Besides that, transportation and agricultural sectors
are major consumers of fossil fuels as well as biggest contributors to pollution, too. This has forced the individuals to search for
alternatives in order to overcome the consequences of the conventional fuels.
Presently, a lot of researches have been carried out over the performances of various alternatives to evaluate their eligibility
to partially or completely replace the conventional fuels. Though a lot of research is carried over various alternatives like ethanol,
alcohols, cottonseed oil, palm oil, jatropha oil, mustard oil, etc., there has been no such promising alternative yet which can replace
diesel, leaving a huge scope in this area. This paper describes yet another experimental investigation to search for the promising
alternative to diesel. It comprises of the turmeric leaf biodiesel blended in varying proportions with diesel and at varying compression
ratios. The results consist of the investigation of various performance parameters based on varying load conditions and its effect over
the emissions. These results are then compared with the performance of neat diesel to prove its eligibility.

Keywords Biodiesel, turmeric leaf oil, variable compression ratio, diesel engine, emissions, alternate fuels, performance,
combustion

INTRODUCTION
India is abode of 1.3 billion people which is 17% of the total world population having rapid growing thirst for energy. For the
last two decades, there has been a tremendous increase in demand of conventional fossil fuels for engine, especially gasoline and
diesel. The ores of these fossil fuels are quoted to become extinct in a couple of decades. This is leading to rapid increase in the costs
and as well as the consequences of global warming. Only a few countries have reservoirs of usable fossil fuels and thus countries like
ours have to be dependable on them. According to the Statistical Review of World Energy (2010), India produces 826000 barrels of
oil per day and requires 3319000 barrels per day. This is a huge energy gap that needs to be bridged. These have freed us with liberty
to try alternatives to diesel.
Thinking of the gaseous fuels, hydrogen appears to be the most promising one in future as it yields the highest amount of
energy on combustion. Also it produces only energy and water when burnt. The consequences at current moment are its production,
storage, distribution and transportation problem. These are claimed to be solved by 2020. While considering the liquid fuels, alcohol
fuels are easy to produce. These are produced by fermentation of crops like corn. But, alcohols are highly corrosive and require certain
expensive replacements in existing parts. Also, compatibility is another problem, as they may have certain effects. For an instance,
production of corn-based ethanol has created an increased demand for feedstock, causing increased prices in all that is made from
corn. So, we remain left to experiment with the biodiesels.

BIODIESEL
More than a century ago, Rudolf Diesel had predicted that plant oils could be used in engines. Biodiesel can be stated as a
fuel that is made up of a mono alkyl ester of a long chain of fatty acids that are derived either from vegetable oil or animal fat.
Vegetable oils have good ignition quality as they have very long chained structures which are not branched. Inversely, the higher
composition of oxygen content, carbon residue and larger molecular mass makes the heating value of biodiesels significantly lower
than diesel. They have higher flash point and are around 10% denser than diesel, making them safe to store. But these have higher cold
point causing them to thicken or even freeze at low ambient temperatures. Their poor volatility due to higher viscosity is responsible
324 www.ijergs.org
International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015
ISSN 2091-2730

for their lower cetane numbers. Further, biodiesels are biodegradable and reduce the CO2 cycle. Also, they do not contain sulfur and
any carcinogens, thus they are not harmful to living beings. An associated problem could be that, growing crops requires lot of time
and high investment and transportation to local stations which makes the more expensive than diesel.

Benefits of biodiesel
The combustion of biodiesel causes 80% less CO2 emissions and no sulfur dioxide.
The proportion of unburnt hydrocarbons is reduced by 90% of unburned.
It is totally non-toxic and biodegradable.
It has almost similar cetane number as that of diesel.
Also, it imparts relatively better lubricity.

Disadvantages of biodiesel
The biodiesel acts as an excellent solvent and thus the deposits at the filter section could get dissolved into it. This may cause
severe degradation of engine parts.
The biodiesel can cause problems in winter as the cold point is relatively higher as compared to the diesel. This means that
the fuel can solidify and choke up the engine.

LITERATURE SURVEY
Mr. S. I. Meshram worked over the turmeric leaf biodiesel and found that when the turmeric leaves oil was used the engine
power slightly decreased for all engine speeds. The loss of power occurred because of the lower calorific value. A brake thermal
efficiency of engine with turmeric leaves oil is found to be slightly less as compared to gasoline. The brake specific fuel consumption
for lower engine speed is more. The CO and HC concentrations using turmeric leaves oil was decreased by 13.7% and 16.94%
respectively in comparison to gasoline, while the NOx concentration was increased by 10%.
Dr V. Naga Prasad Naidu, Prof. V. Pandu Rangadu, Krishna Reddy, R. Anand, G. R. Kannan, K. Rajasekhar Reddy and S.
Velmathi investigated the use of cottonseed oil as biodiesel over a 4-stroke compression ignition engine in two different experimental
setups and working conditions. The blending ratio was varied within a range of 5-40%. Both the experimentations concluded that the
brake thermal efficiency was more for diesel, but the emissions were much reduced by the use of biodiesel. This happened because the
oxygen content in biodiesel is higher, thus ensuring closer to complete combustion. They also found that, the biodiesel with 20%
blending ratio earned to be the most economical one. It resembled the performance of diesel with lower emissions. Sunilkumar
Kumbhar tried thumba oil over a variable compression ratio diesel engine. He observed that, at compression ratio 18, the brake
thermal efficiency and brake specific fuel consumption for 10% blend and 20% blend while brake power with 40% blend showed
better performance. The HC, CO and NOx emissions were least for the 10% and 20% blend, thus proving best.
N. Manikanda Prabu, Dr. S. Nallusamy K. Thirumalai Ra, Pavanendra Kumar, Niraj Kumar, Vineet Tirth, Sejal Narendra
Patel and Ravindra Kirar and Hani Chotai investigated the use of jatropha seed-based oil over the 4-stroke diesel engine and observed
the performance and emission characteristics. The compression ratio 18:1 showed the better experimental results for diesel as well as
blends with least fuel consumption during the blending ratio of 20%, while the exhaust gas temperature, which is the indication of
effectiveness of utilization of heat energy, was the most with the blends whereas, pure diesel giving the least exhaust temperature. The
pure biodiesel being used showed the highest exhaust gas temperature, which means it exhibited highest brake thermal efficiency. But
the problem associated with this was that, the engine would be modifies to the compression ratio of 20 or above. The emissions
showed lower amounts of CO, CO2 and HC when compared with the exhaust gases using pure diesel, while the NO x was inherently
slightly higher because of higher oxygen content and exhaust gas temperature using biodiesel. Conversely, in other experimentation,
the fuel with 50% blend showed the least emissions in expense to the performance characteristics of engine.
Ramchandra S. Jahagidar Eknath R. Deore, Milind S. Patil, Purushottam S. Desale executed an experimentation over the
performance diesel engine fueled with karanja biodiesel. He tested different fuel blends of karanja biodiesel, pure diesel and pure
karanja biodiesel. Results showed that the brake power of the engine did not vary much with any of the fuel combinations and was
almost same for all the loads. However, brake thermal efficiency was improved for the karanja biodiesel from 3 to 8% along with
volumetric efficiency, but it caused reduction in exhaust gas temperature. It was also observed that the blends of 40% and 60% had the
optimum performance for the given conditions.
Similarly, the experimentations have been carried over the bio-products such as soya-bean seed, canola oil, tamanu seed,
jujube seed, mahua oil, fish oil, and palm oil, mixtures of two or more oil-based biodiesels. More of these are easy to cultivate, cheap
in cost, less attention for farming.

325 www.ijergs.org
International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015
ISSN 2091-2730

A. K. Azad, S. M. Ameer Uddin and M. M. Alam investigated whether it is feasible to experiment over a diesel engine using
the biodiesel with and without trans-esterification process. For this purpose, the mustard oil-based biodiesel was used. When the
chemical properties of the two samples, i.e. one with trans-esterified biodiesel and other without it, were tested, it was observed that
the biodiesel without trans-esterification process had higher viscosity, density and moisture content and lower calorific heat content as
compared to the other. When the experimentation was carried out, it was observed that, the heating value of the biofuel gradually
tended to reduce with increase in bio-fuel blends. At low load conditions, the bio-fuel blends had higher brake specific fuel
consumption than diesel. But, as the load was increased and the blend ratio was raised to 30%, it was seen that the brake specific fuel
consumption was least. Also, the fuel without the trans-esterification process showed higher brake specific fuel consumption than the
other one.

TURMERIC LEAF OIL


i. Production of turmeric
Turmeric is cultivated in India, China, Myanmar, Nigeria and Bangladesh. However, authentic figures about area and
production are not available. Major production area is in India which constitutes 82% followed by China (8%), Myanmar (4%),
Nigeria (3%) and Bangladesh (3%).The main turmeric producing states in India are Andhra Pradesh, Tamil Nadu, Orissa, Karnataka,
West Bengal, Gujarat and Kerala.

Table 1: Area and production of turmeric in India


Year Area (in hectares) Production (in tonnes)

2008-09 162.9 552.3

2009-10 149.8 526.4

2010-11 150.7 567.2

2011-12 158.4 718.1

2012-13 177.5 846.7

The biological name of turmeric is Curcuma Longa. The rhizomes of C. Longa are preferably used in Indian systems for
medical purposes, such as antiseptic, carminative, stomachic, appetizer, etc. It also finds its widest use as a constituent of food curry
powders and food colourant but not as a condiment due to its bitterness. Its aroma has also been used to cure pimples, skin whitening
as well as blood purification. The leaves of C. Longa have been observed to be a waste product which has traditionally been used for
culinary preparation which are aromatic and contain oil. The leaves were cut into small pieces and hydro-distilled; major volatile
constituents were identified under the chromatogram. These showed 1.32% of essential oil containing -phellandrene 38.24%, C8-
aldehyde 20.58%, 1,8-cineole 8.64, -pinene 2.88% and -pinene 2.36%. Out of these, -pinene and -pinene are the hydrocarbons
and these burns in the process of combustion. Earlier, it was reported that the turmeric leaf oil is mixture of ketones and alcohols. In
later studies, it was seen that the main constituent is phenol, which is a kind of alcohol. Moreover, the local experiences show that
turmeric leaves are readily explosive, which proves it to have higher calorific content. Inspite of this, the use of turmeric leaf oil has
been less used for the purpose of producing heat energy in automobiles.
Nilesh Mundle, a pharmacy student from eastern Maharashtra advocated the use of turmeric leaf oil as possible alternative for
biodiesel. He posted a related article when he found that the leaves could burn easily. This clicked that the turmeric leaves could
contain some amounts of oil content. The turmeric leaf oil has less viscosity than as compared to gasoline. So it can undergo even
better combustion than the gasoline, thus could be able to improve the performance.

ii. Turmeric leaf biodiesel


a. Preparation of biodiesel
The vegetable oil when extracted from the resources contains fatty acids, water, sterols, phospholipids, odorants and
impurities. If it is directly injected into the diesel engine, it may cause numerous severe problems. These may occur because of high
viscosity, low volatility and poor cold low properties. These may lead to engine deposits, injector choking, piston ring sticking, etc.
Thus, it becomes mandatory to make some chemical processes over the oil in order to make it suitable for the engine without any
326 www.ijergs.org
International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015
ISSN 2091-2730

modifications in existing parts. For this purpose, various chemical methods are used. The effective methods used for fulfilling the
objective are:
1) Pyrolysis
2) Micro-emulsification
3) Dilution
4) Trans-esterification

Trans-esterification Process
The trans-esterification process involves certain number of reactions and processes as shown in the figure above. The steps
involved in the trans-esterification process are as follows:

1) Mixing of alcohol and catalyst: A specified amount of methanol is added with a measured quantity of NaOH, which acts as
catalyst, into a flask.
2) Reaction: This mixture is then added into a closed reaction vessel and the respective vegetable oil is added and heated to 60-
80oC. This reaction converts the fats into the esters. Sometimes, an extra amount of fuel can be added in order to ensure
complete conversion of fats to esters.

Fig 1: Trans-esterification process

3) Separation of biodiesel and glycerin: After the completion of reaction, two products exist: biodiesel and glycerin. The
quantity of glycerin varies as per the kind and quantity of vegetable oil.
4) Removal of alcohol: The mixture of biodiesel and glycerin is heated up to 60oC, thus producing the steams, which separates
the amount of glycerol from the mixture. The methanol is sufficiently dry in order to recirculate it back into the reaction.
5) Glycerin neutralization: The glycerin byproduct contains unwanted quantity of catalyst and soap and needs to be
neutralized with an acid.
6) Methyl ester wash: This is the final phase which ensures the complete removal of unwanted contents from the biodiesel, so
as to make it compatible with the diesel engine.
The single phase method is applicable only if the amount of free fatty acids (FFA) in vegetable oil is less than 4%. This
involves a measured amount of alcohol as methanol and the catalyst NaOH and the mixture is heated and maintained at 65 oC. In case
of fatty acids more than 4%, double phase method is applicable. It involves mixture of H 2SO4 and methanol to be taken and added and
supplied to esterification process first and then it is heated and maintained at 65 oC. This is then passed onto and previous process is
carried out.

b. Properties of turmeric leaf biodiesel:

327 www.ijergs.org
International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015
ISSN 2091-2730

The chemical properties of the biodiesel play very important role. The following section compares the various properties of
turmeric leaf oil with diesel:

Table 2: Comparison of properties of turmeric leaf oil with diesel


Properties Diesel Turmeric leaf oil Acceptable range

Chemical formula C12H23 C21H20O6 -

Molecular weight 196.23 368.379 -

Density (m3/kg) a 20oC 842 925 800-950

Kinematic viscosity (mm2/s) at


2.5 7.82 1.9-8.0
40oC

Calorific value (kJ/kg) 44000 43672 -

Flash point (oC) 70 102 >130

It can be observed that the calorific value of turmeric leaf oil is comparable to that of diesel. Also its density is within the
acceptable range as per the ASTM norms. The viscosity is the factor which signifies whether the engine parts needs to be modified or
not. Since, it is also in the acceptable range, there is no such issue. This makes the turmeric leaf biodiesel to be experimentally fit
without any modifications in parts of the engine.

SUMMARY
As per the study concluded, it is feasible to work over the turmeric leaf biodiesel in a variable compression ratio engine.
Though, the experimentation would show the results including relatively less performance as compared to diesel, it would
definitely produce similar brake power with slightly higher fuel consumption.
It is better to use the trans-esterified biodiesel with or without blending in the diesel engine as it would add an advantage of
fuel flexibility without making changes in existing parts along with assurance for extended engine life.
It should be noted that, the range of blending that should be considered during experimentation is 10-30%, as it can be seen
from literature survey to obtain satisfactory results.
The emissions using the biodiesel could be satisfactorily reduced; the CO, CO 2, and HC reduce while the NOx emissions
should increase because of higher oxygen content and higher exhaust gas temperature as compared to that with diesel.

REFERENCES:
[17] Sachin I. Meshram, Prof. M. S. Deshmukh, Evaluation of Performance and Emission Characteristics of Turmuric Leaves-based
Fuel on 4-stroke SI Engine, Third International Conference on Emerging Trends in Engineering and Technology
[18] Dr V. Naga Prasad Naidu, Prof. V. Pandu Rangadu. Experimental Investigations on a four stoke Diesel engine operated by
Cotton seed biodiesel blended with Diesel, International Journal of Engineering and Innovative Technology (IJEIT) Volume 3,
Issue 10, April 2014
[19] A. V. Krishna Reddy, M. Shiva Shankar, K. Apparao, Experimental Determination of Brake Thermal Efficiency and Brake
Specific Fuel Consumption of Diesel Engine Fuelled With Biodiesel, International Journal of Engineering and Technology Vol.2
(5), 2010, 305-309
[20] R. Anand, G. R. Kannan, K. Rajasekhar Reddy and S. Velmathi, The Performance and Emissions of a Variable Compression
Ratio Diesel Engine Fueled with Biodiesel from Cottonseed Oil, ARPN Journal of Engineering and Applied Sciences VOL. 4,
NO. 9, NOVEMBER 2009 ISSN 1819-6608
[21] R. Senthil Kumar, R.Manimaran, Performance and Emission Characteristics on 4-Stroke Single Cylinder C. I. Engine using
Cottonseed Bio Fuels, Asian Journal of Engineering Research ISSN-23192100

328 www.ijergs.org
International Journal of Engineering Research and General Science Volume 3, Issue 2, Part 2, March-April, 2015
ISSN 2091-2730

[22] N. Manikanda Prabu, Dr. S. Nallusamy and K. Thirumalai Rasu, Experimental Analysis of Jatropha Curcas Bio-Diesel for
Optimum Blend Characteristics, Bonfring International Journal of Industrial Engineering and Management Science, Vol. 3, No.
2, June 2013
[23] Pavanendra Kumar, Niraj Kumar, Vineet Tirth, Comparative Analysis of Performance and Emission of Diesel Engine by
Varying Compression Ratio Using Different Fuels, MIT International Journal of Mechanical Engineering, Vol. 3, No. 2, August
2013, pp. 8690 ISSN No. 22307680
[24] Sejal Narendra Patel, Ravindra Kirar, An Experimental Analysis of Diesel Engine Using Biofuel at Varying Compression Ratio,
International Journal of Emerging Technology and Advanced Engineering (ISSN 2250-2459, Volume 2, Issue 10, October 2012)
[25] Hani Chotai, Review on Effect of Varying Compression Ratio on Performance & Emissions of Diesel Engine fueled with Bio-
diesel, International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 4, July 2013
[26] Ramchandra S. Jahagidar, Eknath R. Deore, Milind S. Patil, Purushottam S. Desale, Performance Characterization of Single
Cylinder DI Diesel Engine Fueled with Karanja Biodiesel, Proceedings of the World Congress on Engineering 2011 Vol III
WCE 2011, July 6 - 8, 2011, London, U.K.
[27] A.H. Zaibunnisa, S. Norashikin, S. Mamot, H. Osman, An experimental design approach for the extraction of volatile
compounds from turmeric leaves (Curcuma domestica) using pressurised liquid extraction, LWT - Food Science and
Technology 42 (2009) 233238
[28] Mohamed F. Al-Dawody and S.K. Bhatti, Effect of Variable Compression Ratio on the Combustion, Performance and Emission
Parameters of a Diesel Engine Fuelled with Diesel and Soybean Biodiesel Blending, World Applied Sciences Journal 30 (12):
1852-1858, 2014 ISSN 1818-4952 IDOSI Publications, 2014 DOI: 10.5829/idosi.wasj.2014.30.12.338
[29] Sunilkumar R. Kumbhar, H. M. Dange, Performance Analysis Of single Cylinder Diesel Engine, Using Diesel Blended with
Thumba Oil, International Journal of Soft Computing and Engineering (IJSCE) ISSN: 2231-2307, Volume-4, Issue-1, March
2014
[30] Anbarasu.A, Karthikeyan.A., Performance and Emission Characteristics of Direct Injection Diesel Engine Running On Canola
Oil / Diesel Fuel Blend, American Journal of Engineering Research (AJER) e-ISSN : 2320-0847 p-ISSN : 2320-0936 Volume-
03, Issue-08, pp-202-207
[31] Sayi Likhitha S S1, B. Durga Prasad2, Ch. R. Vikram Kumar, Investigation on the Effect of Diethyl Ether Additive on the
Performance of Variable Compression Ratio Diesel Engine, nternational Journal of Engineering Research ISSN:2319-
6890)(online),2347-5013(print) Volume No.3 Issue No: Special 1, PP: 11-15 22nd March 2014

329 www.ijergs.org

You might also like