SCOPE OF STUDY

The title chosen for the project are CMOS Digitally Controlled Active Phase Shifter
Circuit. Based on title, it clearly shown that this project was purposely required to design a
phase shifter using CMOS technology.

It also a type of phase shifter that have the capabilities to be control digitally which
mean that this type of phase shifter are designed with a digital signal control. This digitally
controlled means that this phase shifter is not by value 1 or 0 but it was more like a two state
devices that different insertion phase bits and applied as the function of switches for phase
shifter circuit.

There are 2 two type of electronic circuit design which are passive and active circuit
design. In this project, active circuit design was choose to design an active phase shifter.
According to active circuit design, the active phase shifter design required active components
to be use in designing the phase shifter circuit. One of the most famous active component use
for designing was transistor and logic gates.

In terms of technology, CMOS technology will be used to design this type of phase
shifter. For CMOS technology, 0.18 nm technology are chosen to design the phase shifter
circuit.
PROBLEM STATEMENTS

This project was basically intend to design an active phase shifter that controlled by
digital inputs. The problem of the study is that an electronic device need a mechanism of phase
shifting for various electrical devices such as oscillator. As example an oscillator need a 360
phase shift because it need a positive feedback to work or more specifically to oscillate. So, the
signal have to be shifted to make the feedback signal.

The second problem was to control the shifting of phase using digital signal. So, some
of an electrical need a phase shifter that can be control digitally because of its immune to noise
characteristic.

OBJECTIVES

1. To get the phase shifted to according the degree of angle.

CMOS Technology

CMOS Technology is one of the most used technology use in the computer chip design
industry and broadly used to form integrated circuits in many applications. This technology
was more preferable because of its smaller power dissipation feature. It is because the power
is only dissipated in case if the circuit is actually switches and it allows the integrating of more
CMOS gates on Integrated Circuits than in NMOS technology or bipolar technology in which
will result in better performance. CMOS is actually the combination of P- Channel MOS
(PMOS) and N-Channel MOS (NMOS) transistor.

NMOS is a type of transistor that have electrons as its majority carriers. The NMOS
will be switch on by applying a high voltage or high logic signal to it. When a low voltage or
low logic signal applied to it, the transistor will not conduct. In the other hand, PMOS is a
complementary of NMOS transistor. It will only switch on when low voltage or low logic
signal was applied to it and it have holes as its majority carriers. It was said that the NMOS is
faster than PMOS because of its majority carrier, electron who travel twice as fast as the holes.

In CMOS technology, both NMOS and PMOS transistor was use to design logic
functions or gates. The simple method to operate was that the signal that on one of the transistor
will turn off the other transistor. So, this type of transistor was design to acts as a simple
switches that control the operation the designed electronic devices. Few of example electronic
circuit that uses the CMOS Technology was logic gates such as inverter and NAND gate.

Digital

In general digital describes electronic technology that generates, stores and processes
data in terms of two state which represented by number 1 for high or positive value or 0 for
low or non-positive value. Thus, the data transmitted or stored with digital technology is
expressed as a string of 0s and 1s. Each of these state digits is referred as a bit. In the
electronics, these digital system was use as digital signal that represent the Boolean Algebra
and are the basis of all digital circuits for computer, integrated circuits and other electronic
devices.
Digitally Controlled

A digitally controlled control is basically give the meaning of using digital input to
control the behaviour of the circuit. One of the best example of component that uses digital
signal to control the circuit is transistor or other transistor based component like MOSFET and
BJT. This component actually was a component that receive digital signal input and acts as
switch to turn on or switch off the electronic devices. As example, one of the famous MOSFET
technology use in designing electronics circuits is CMOS technology or complementary MOS
technology. A CMOS technology circuits is actually the combinations of PMOS and NMOS
transistor that acts differently with digital signal input.

Figure 1 CMOS Inverter

Figure 2 PMOS and NMOS

An active circuit is type of circuit that have at least on active component in the designed
circuit. It also said that an active circuit have the ability to control the behaviour of the circuit
using active component such as transistor and logic gates. An active components is a
component that produce energy in the form of voltage or current. Active components also have
the ability to provide the power gain and control the current flow within the circuit. For passive
components it have a complementary characteristic as the active components.

Phase Shift

Generally, in the form alternating current (AC) the signal produce are in the cycle of
positive and negative. One complete signal was represented by cycle from zero to positive peak
to zero and to negative peak until zero again. The position of a signal of a waveform is known
as Phase of a waveform. For one complete phase of a full cycle waveform is 360 degree. In
other term, phase also can defined as the displacement of two waves with respect to each other.

In term of phase, there is one more parameter that also important which is phase
difference. Phase difference is a degree or radians that a waveform has shift from a certain
reference point along the horizontal zero axis.

Figure 2 The phase shifting of signal

A Amplitude of the waveform

Omega angular frequency of waveform in radian

Pi phase shift

Based on the equation, it shown that from the equation few parameter can be obtain which are
the amplitude or peak of the signal, the frequency of the waveform and the phase shift of the
waveform. The phase shift of the signal is the shifting of the signal from the existing position
in which will show the direction of the shifting. If the value of phase shifting was in positive
value, it shown that the waveform is ahead of another wave with the same frequency in leading
phase. Instead of that, if the value of phase shift was in negative value it describe that the
waveform is behind another wave with same frequency in lagging phase.
Phase Shifter

A phase shifter is a type of two-port device whose basic function was to provide change
in the phase of radio frequency (RF) signal with negligible attenuation. It have three important
characteristics which are low insertion loss, have equal amplitude for all phases states and
reciprocal networks. Phase shifter can be control through few mechanism which are
electrically,magnetically and mechanically. But, most of the phase shifter are electronically-
controlled whether by analog or digitally controlled.

Phase shifter can be controlled digitally or using analog signal. An analog phase shifter
provide a variable phase and oftenly controlled by a voltage. An electrical analog phase shifter
have been use in antenna to steer the antenna and also use radar systems. This type of phase
shifter somehow have varactor diodes to change the capacitance with voltage in its operation.
For digital phase shifter, it provide discrete phase of states that controlled by two state phase
bits. The highest order of bit it can operate was 180 degrees and decreasing accordingly to the
phase shifter sensitivity based on the phase shifter design. Those 360 degrees is divided into
smaller binary steps based on the phase bits. As example if the phase shifter designed was three
bits phase shifter it would have 45 degree least significant bit(LSB).

Analog Phase Shifter Digital Phase Shifter

- Lower loss. - Immunity to noise

Table 1 The advantages of Analog and Digital Phase Shifter

Two port network is type of electrical network that has two pair of terminal which one
pair represented as the input and other pair as the output. It has two terminal pairs acting as
access points as the current entering one terminal and leaves the other terminal. A two-port
network has four port variables which is input voltage, input current, output voltage and output
current. For linear two-port network we can use two of the variables as excitation variables and
other two variables as the response variables.

Phase shifter is a type of two-port microwave devices that happen to be function as a