Quick Reference Mechanical Specifications

NEMA size 17 1.8 Dimensions in inches (mm)

2-phase stepper motor 0.94 0.02
(23.88 0.51)
Optional LMAX
rear
0.590 (14.86)
shaft

0.55 0.177 0.002

(14) (4.52 0.05)

0.177 0.002
(4.52 0.05)

0.197 ( 5.0) 0.08 (2.03)

Flat extends to
rear end bell
11.8 inches (30 cm)

FRONT VIEW

4X M3xP0.5
0.177 (4.5) deep min
0.197 +0/-0.001
( 4.99 +0/-0.012)
0.866 +0/-0.002
Notes and Warnings ( 22.0 +0/-0.052)

Installation, configuration and maintenance must be carried out by qualified tech- 1.22
nicians only. You must have detailed information to be able to carry out this work. (30.99)
Unexpected dangers may be encountered when working with this product! 1.67
Incorrect use may destroy this product and connected components! (42.3)
For more information, go to www.imshome.com
REAR VIEW (Reduced)
Specifications
1.5 Amp motors Single length Double length Triple length 2X M2
0.20 (5.1)
Part number M-1713-1.5 (1) M-1715-1.5 (1) M-1719-1.5 (1) deep min
Holding torque oz-in 32 60 75
N-cm 23 42 53
Detent torque oz-in 1.7 2.1 3.5
N-cm 1.2 1.5 2.5
Rotor inertia oz-in-sec2 0.000538 0.0008037 0.0011562
kg-cm2 0.038 0.057 0.082 0.75 0.005
(19 0.13)
Weight oz 7.4 8.1 12.7
grams 210 230 360
Phase current amps 1.5 1.5 1.5 Motor stack length inches (mm) Single Double Triple
Phase resistance ohms 1.3 2.1 2.0 LMAX 1.34 (34.0) 1.57 (40) 1.89 (48)
Phase inductance mH 2.1 5.0 3.85
(1) Indicate S for single-shaft or D for double-shaft. Example M-1713-1.5S

Part Numbers
Wiring and Connections
Signals and wire colors Example: M - 1 7 1 3- 1. 5 S
Phase A Red Stepper motor frame size M - 1 7 1 3 -1 .5 S
Phase /A Blue M - 17 = NEMA 17 (1.7 / 42 mm)
Phase B Green Motor length M - 1 7 1 3 1 .5 S
Phase /B Black 13 - = single stack
15 - = double stack
19 - = triple stack
Phase current M - 1 7 1 3 -1 .5 S
1.5 = 1.5 Amps
Shaft M - 1 7 1 3 -1 .5 S
S = single, front shaft only
D = double, front and rear shafts
Optional optical encoder (1) M - 1 7 1 3 -1 .5 E S 1 0 0
ES = Single-end
ED = Differential
Line count
100, 200, 250, 400, 500 or 1000 (2)

(1) An encoder replaces the shaft designator in the part number.

(2) All encoders have an index mark, except the 1000 line count version.

NEMA17 stepper motor Quick Reference R060210

Torque-speed performance Optical Encoder Option
Measured at 1.5 Amps RMS
Dimensions in inches (mm)

0.078 (1.98) 3 places

M-1713-1.5 equally spaced on a
0.823 (20.9) bolt circle
0.600
Torque in oz-in (N-cm) 2X 0.109 (2.7) (15.2)
1.420
53 (39) (36.0)
24 VDC 1.700
48 VDC (43.1)
0.750
37 (26) (19.0)

0.69
18(13) (17.5)

Connectivity single-end encoder differential encoder

0
0 2000 4000 6000 2 4 6 8 10
(600) (1200) (1800) 13579
12345
Speed in full steps per second (rpm)

M-1715-1.5 wire function pin function pin function

Torque in oz-in (N-cm) 1 Brown Ground 1 no connect 6 Channel A+
2 Violet Index 2 +5 VDC input 7 Channel B
3 Blue Channel A 3 Ground 8 Channel B+
53 (39) 9 Index
24 VDC 4 Orange +5 VDC input 4 no connect
48 VDC 5 Yellow Channel B 5 Channel A 10 Index +

optional interface cable interface cable included

37 (26)
available: ES-CABLE-2

Timing single-end encoder differential encoder

18(13)
C X Y
X Y
CH A +
0 CH A
0 2000 4000 6000 Z CH A -
(600) (1200) (1800)
Z
Speed in full steps per second (rpm) CH B
t1 CH B +
M-1719-1.5 t2
Torque in oz-in (N-cm) IDX CH B -
t1
Po t2
53 (39) IDX +
24 VDC
48 VDC Po IDX -

37 (26)
Parameter Symbol Min Typ Max Units
Cycle error 3 5.5 e
18(13) Symmetry 130 180 230 e
Quadrature 40 90 140 e
Index pulse width Po 60 90 120 e
0 Index rise (after Ch A or B rise) t1 -300 100 250 ns
0 2000 4000 6000 Index fall (after Ch A or B fall) t2 70 150 1000 ns
(600) (1200) (1800)
C One cycle: 360 electrical degrees (e).
Speed in full steps per second (rpm)
X/Y Symmetry: the measure of the relationship between X and Y, nominally 180e.
Z Quadrature: the phase lead or lag between channels A and B, nominally 90e.
Po Index pulse width, nominally 90 e.
NOTE: Rotation is as viewed from the cover side of the encoder.

Copyright Schneider Electric Motion USA www.schneider-electric-motion.us