Don't Forget to Accessorize!

Don't Forget to Accessorize!

Individual Cables
Part # Description
D25492 Cable, straight, accel, black, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug The AMS 2140 Machinery Health Analyzer comes equipped with the technology
connector 4ft. and embedded intelligence that will help you increase reliability in your facility.
D25485 Cable, straight, accel, red, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector 9ft. But it takes the right accessories to unlock the untapped potential of your investment.
D25486 Cable, straight, accel, blue, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector 9ft.
Featured Accessories Part # Description
D25487 Cable, straight, accel, grey, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector 9ft.
A40ADPTR Simultaneously collect four-channel acceleration data for rolling element
D25488 Cable, straight, accel, black, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector 9ft. bearings analysis, or four-channel volts data for sleeve bearings analysis from
a single input adapter by simply turning it over and using the appropriate side.
D25499 Cable, straight, male center contact BNC plug connector to male center contact BNC plug connector, extension cable, 4ft. Both simultaneous 4-channel analysis techniques can also be with phase signals
D25500 Cable, straight, male center contact BNC plug connector to male center contact BNC plug connector, extension cable, 9ft. on the 5th input to allow for the most comprehensive analysis possible.

MHM-65003-PBF Cable, straight, accel, 5-pin straight female M12 connector to 5-pin straight male M12 connector, 4-ch input adapter
to AMS 2140 (0.2m.)
A2140CASE High-quality, lightweight, lockable, waterproof, dustproof, and impact resistant
MHM-65004-PBF Cable, straight, accel, 5-pin straight female M12 connector to 5-pin straight male M12 connector, extension cable, 2m. Pelican case for protecting and transporting your analyzer and standard
MHM-65006-PBF Cable straight, volts, 8-pin straight female M12 connector to 8-pin straight male M12 connector, 4-ch input adapter accessories from site to site.
to AMS 2140 (0.2m.)
MHM-65007-PBF Cable, straight, volts/tach, 8-pin male M12 connector to 8-pin straight female M12 connector, extension cable, 2m.
A647BT Bluetooth Headphones with built-in volume control for use with the AMS 2140.
D25535 Cable, straight, CSI 555 Vibration Strobe to AMS 2140, 8-Pin male M12 to 1/8" mono plug, 5-pin male M12 to 1/8'
stereo plug, 6ft.
Hard hat compatible with 23 decibels of noise reduction. Listen to vibration
signals from the AMS 2140.
MHM-65141-PBF AMS 2140 micro-USB communications cable

How to Order MHM-65139-PBF Make the most of your windshield time - the AMS 2140 car charger plugs into
To receive a quote on these and other accessory items, send an email to MHM.Accessory@Emerson.com. your car's 12Volt DC adapter and allows you to charge the AMS 2140 battery
safely while traveling from site to site.
A40EXCHRG Having a spare battery is never a bad thing! Use the external battery charger to
charge a spare battery (included) while you are using the AMS 2140 in the field.
Swap the battery in the AMS 2140 with the fully charged spare battery on the
charger when you need extra run time.

A40SENHOLDR No more need to hold the accelerometers in your hand or stuff them in
your pocket when collecting your route vibration data with this handy
strap mounted dual accelerometer holder. Just thread the AMS 2140 shoulder
strap through the accelerometer holder and then attach up to two magnet
mounted accerometers to it for easy and convenient carrying to the next
measurement location.
2017, Emerson. All rights reserved.
A40SVMNT This removable mounting device for the AMS 2140 makes it easy to take the
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the
property of their respective owners. Model 430 SpeedVue laser speed sensor along on route collection, putting
Emerson precise
Reliability Solutions The contents of this publication are presented for informational purposes only, and while every
speed detection at your fingertips! Simple push button attachment to the
835 Innovation Drive effort has been made to ensure their accuracy, they are not to be construed as warranties or
Knoxville, TN 37932 USA guarantees, express or implied, regarding the products or services described herein or their
strap mount holes on either side of the AMS 2140. Convenient 360 degree
+1 865 675 2400 use or applicability. All sales are governed by our terms and conditions, which are available on articulating centerpiece allows you to aim through guards, grates, or other tight
request. We reserve the right to modify or improve the designs or specifications of our products spots to get to the machine shaft.
www.emerson.com/ams at any time without notice.

www.emerson.com/ams www.emerson.com/ams
Don't Forget to Accessorize! Don't Forget to Accessorize!

Packages Part # Description Packages Part # Description

A21401CHACC AMS 2140 Single-Channel Accessories Package contains: A0404P40 Model 404 Phototach with external power supply for use outdoors or for longer
- 1 each A0760GP accelerometer distances from the AMS 2140. Comes with AMS 2140 compatible M12-to-BNC
- 1 each D25482 coiled M12 to 2-pin Mil accel cable tach cable in hardshell carrying case. Package includes:
- 1 each A090835 2-pole magnet - 1 each D25472 straight cable, 4'
- 1 each B404-BASE adjustable magnetic base
- 1 each B40405 powering cable
A2140Q1CHACC Safety-Rated AMS 2140 Single-Channel Accessories Package contains: - 1 each A403 roll of reflective tape
- 1 each A0761GP-EX accelerometer
- 1 each D25482 coiled M12 to 2-pin Mil accel cable A0555-40 AMS 555 Vibration Strobe and AMS 2140 compatible interface cable. Strobelights
- 1 each A090835 2-pole magnet are very useful for inspecting the shafts, belts, couplings, and other rotating parts
of the machines by visually "stopping" them by flashing at the same rate as their
running speed. The AMS 555 vibration strobe has the ability to lock on the running
A21402CHACC AMS 2140 Dual-Channel Accessories Package contains: speed as detected from the vibration signal received from the accelerometer
- 1 each D25482 coiled M12 to 2-pin Mil accel cable signal for easier machine speed tracking.
- 1 each D25480 straight M12 to 2-pin Mil cable for accelerometer A
- 1 each D25481 straight M12 to 2-pin Mil cable for accelerometer B Individual Cables
- 2 each A0760GP accelerometer Part # Description
- 2 each A090835 2-pole magnet
D25504 Accel A and B M12 to BNC splitter cable
A2140Q2CHACC Safety-Rated AMS 2140 Dual-Channel Accessories Package contains:
- 1 each D25482 M12 to 2-pin Mil accel coiled cable D25505 Accel C and D M12 to BNC splitter cable
- 1 each D25480 straight M12 to 2-pin Mil cable for accelerometer A
- 1 each D25481 straight M12 to 2-pin Mil cable for accelerometer B D25506 Volts A and B M12 to BNC splitter cable
- 2 each A0761GP-EX accelerometer
- 2 each A090835 2-pole magnet D25526 Accelerometer cable for channel-D, 5-pin male M12 to 2-pin Mil-DTL-5015 plug connector. Used for reference
accelerometer on channel-D in conjunction with Triax sensor on channels ABC for easy 4-channel ODS modal
A21404CHACC AMS 2140 Four-Channel Accessories Package contains: data collection.
- 1 each A40ADPTR four-channel adapter
- 4 each A0760GP accelerometer D25525 Accelerometer cable for channel-D, 5-pin male M12 to BNC connector. Used with impact hammer on channel D in
- 4 each A090835 2-pole magnet conjunction with triax sensor on channels ABC for easy impact testing and cross channel phase measurements.
- 1 each D25489 straight BNC to 2-pin Mil cable, red
D25495 Cable, straight, accel, 5-pin male M12 connector to 3-socket female half breakaway connector, 15in.
- 1 each D25490 straight BNC to 2-pin Mil cable, blue
- 1 each D25491 straight BNC to 2-pin Mil cable, gray D25480 Cable, straight, accel, 5-pin male M12 connector to 2-socket female MIL-DTL-5015 plug connector (Accel A), 5ft.
- 1 each D25492 straight BNC to 2-pin Mil cable, black
- 4 each D25499 BNC to BNC straight cable D25481 Cable, straight, accel, 5-pin male M12 connector to 2-socket female MIL-DTL-5015 plug connector (Accel B), 5ft.
- 1 each D25504 split cable for accelerometers A and B
- 1 each D25505 split cable for accelerometers C and D D25688 AMS 2140 3-way splitter cable, 8-pin M12 to BNC 0.2M red, blue and tach

A2140Q4CHACC Safety-Rated AMS 2140 Four-Channel Accessories Package contains: D25777 Cable, straight, A0643TX triax accel, 5-pin male M12 connector to 5-pin female connector 6ft.
- 4 each A0761GP-EX accelerometer
- 4 each A090835 2-pole magnet D25483 Cable, straight, accel, 5-pin male M12 connector to male center contact BNC plug connector (Accel A), 2m.
- 1 each D25489 straight BNC to 2-pin Mil cable, red D25484 Cable, straight, accel, 5-pin male M12 connector to male center contact BNC plug connector (Accel B), 2m.
- 1 each D25490 straight BNC to 2-pin Mil cable, blue
- 1 each D25491 straight BNC to 2-pin Mil cable, gray D25482 Cable, coiled, accel, 5-pin Male M12 connector to 2-socket female MIL-DTL-5015 plug connector, 6ft.
- 1 each D25492 straight BNC to 2-pin Mil cable, black
- 4 each D25499 BNC to BNC straight cable D25473 Cable, straight, 8-pin male M12 connector to 4-pin male Lemo connector (21" SpeedVue)
- 1 each D25504 split cable for accelerometers A and B
- 1 each D25505 split cable for accelerometers C and D D25474 Cable, straight, 8-pin male M12 connector to 4-pin male Lemo connector (42" SpeedVue)

A0430L4 Model 430 Laser Speed Sensor with AMS 2140 compatible M12-to-Lemo cable D25475 Cable, straight, 8-pin male M12 connector to 4-pin male Lemo connector (6ft. SpeedVue)
(D25473) in hardshell carrying case. Package includes one-year warranty,
D25479 Cable, straight, volts, 8-pin male M12 connector to male center contact BNC plug connector (Volts A), 4ft.
user documentation, and CE declaration of conformity.
D25472 Cable, straight, volts/tach, 8-pin male M12 connector to male center contact BNC plug connector (Tach), 4ft.

D25476 Cable, straight, volts/tach, 8-pin male M12 connector to 4-pin AMP connector (Tach), 2m.
A0404B40 Model 404 infrared phototach with AMS 2140 compatible M12-to-Amphenol
cable. Can be used for getting speed and phase via TTL pulse for balancing or cross D25494 Cable, coiled, accel, 3-pin male half breakaway plug connector to 2-socket female MIL-DTL-5015 plug connector, 6ft.
channel phase analysis.
D25489 Cable, straight, accel, red, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector 4ft.

D25490 Cable, straight, accel, blue, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug
connector 4ft.
D25491 Cable, straight, accel, grey, male center contact BNC plug connector to 2-socket female MIL-DTL-5015 plug connector
4ft.

2 3