REPUBLIC OF THE PHILIPPINES

Department of Budget and Management

Malacaang, Manila

NO. 446-A
January 30, 1998

TO: ALL HEADS OF DEPARTMENTS, BUREAUS, OFFICES AND AGENCIES OF

THE NATIONAL GOVERNMENT, INCLUDING GOVERNMENT-OWNED
AND/OR CONTROLLED CORPORATIONS, STATE UNIVERSITIES AND
COLLEGES, LOCAL GOVERNMENT UNITS AND ALL OTHERS CONCERNED

SUBJECT: AMENDING NATIONAL BUDGET CIRCULAR (NBC) NO. 446, DATED

NOVEMBER 24, 1995, ON THE SUBJECT, GUIDELINES ON THE
ACQUISITION AND RENTAL OF MOTOR VEHICLES

1.0 PURPOSE

This Circular is being issued to:

1.1 Amend NBC No. 446 to rationalize/refine existing policies relative to the acquisition
of motor vehicles for government use;
1.2 Prescribe policy guidelines on U1e purchase of secondhand/reconditioned
transport and heavy equipment as an alternative mode of motor vehicle acquisition;
and
1.3 Update the Motor Vehicle Classification and Specifications Guide or MVCSG to cover
current motor vehicle models available in the market that are deemed most
appropriate for the prevailing service vehicular requirements of the government.

2.0 GENERAL POLICY

Pursuant to the policy of the State to promote the optimum utilization of public resources,
the acquisition of motor vehicles for government use shall be rationalized to enhance
economy in government operations. For this purpose, motor vehicles to be acquired shall be
limited to those that are deemed necessary and appropriate for the performance of
government official functions and activities requiring transport.
3.0 SPECIFIC AMENDMENTS
To effect a uniform understanding of vehicle classifications and the inclusion of modified
specifications of motor vehicles appropriate for government use, Annex A (Typology of
Government Motor Vehicles) is herein made part of this Circular, while Annex B (Revised
Motor Vehicle Classification and Specifications Guide or RMVCSG) and paragraphs 4.1. and
4.2 of NBC No. 446, s. of 1995, are hereby amended to read as follows:
4.1 National government agencies (NGAs), including government-owned and/or -
controlled corporations (GOCCs) and state universities and colleges (SUCs),
may purchase the following types of vehicle chargeable against their respective
appropriations authorized for the purpose upon approval by the Agency Head
and the Secretary of Budget and Management:
Motor vehicles with either imported or locally manufactured chassis and
body
o medical ambulances
o military and police patrol vehicles
o armored vehicles
o fire trucks
 o heavy equipment for road construction, waste
management/environmental sanitation, farm cultivation, and cargo
transport/delivery (e.g., graders, payloaders, dumptrucks, compactors,
farm tractors, delivery/cargo vans or trucks)
Motor vehicles with locally manufactured chassis and body

o passenger wagons/vans
o Asian Utility Vehicles (AUVs) or High Side Pick Up with Roof (HSPUR)
utility vehicles
o mini-buses/buses
o agency-specific purpose vehicles (e.g., prisoners' vans, OB vans, etc.)

Other motor vehicles

o motorized boats
o motorcycles and tri-wheel vehicles
o assembled owner- or passenger-type jeep/jitney/jeepney

Purchases of the aforecited motor vehicles may, in some cases, be referred by

the Secretary of Budget and Management to the Office of the President for
final consideration/approval.
4.2 The purchase of the following motor vehicles is subject to approval of the
President:
cars (sedan or hatchback type)

motor vehicles with imported chassis and body

o passenger wagons/vans
o pick-ups and all-terrain vehicles o mini-buses/buses
o mini-buses/buses
o agency-specific purpose vehicles
aircraft and seacraft

4.0 PURCHASE OF SECOND-HAND/RECONDITIONED TRANSPORT AND HEAVY

EQUIPMENT

Generally, acquisition of brand new units by outright purchase (paid for on a single, lump-
sum basis) shall be adopted as a mode of motor vehicle acquisition.

In exceptional cases, however, particularly when acquisition of brand new units by outright
purchase is not feasible, the purchase of second-hand/reconditioned transport and heavy
equipment as an alternative mode of acquisition may be authorized, subject to the following
requirements:
4.1 The mileage of the second-hand vehicle to be purchased, estimated from the time it
was originally acquired as a brand new unit, must not exceed 50,000 kms. for high
official function cars/sedans, passenger vans/wagons, and other service vehicles
and 60,000 kms. for utility vehicles. Mileage refers to the total distance travelled by
the vehicle to be purchased.
4.2 The remaining useful life of the vehicle to be purchased must not be lower than five
(5) years in the case of high official function cars/sedans, passenger vans/wagons,
and other service vehicles and three (3) years in the case of utility vehicles. For
purposes of this Circular, remaining useful life refers to the difference between the
estimated service life of the subject vehicle and the number of years of actual
service of the same. (The generally accepted estimated service life of high official
function cars/sedans, passenger vans/wagons, and other service vehicles is seven
(7) years while that of utility vehicles is five (5) years.)
4.3 The price or amount at which the second hand/reconditioned vehicle is to be
acquired must not exceed its Remaining Useful Value (RUV).
For this purpose, the standard formula to compute for the RUV is:
RUV = (AC - SV) x R/L + SV, where:
RUV = Remaining useful value
AC = Acquisition cost or the price/amount at which the vehicle was
originally purchased or acquired as a brand new unit
SV = Salvage value or the amount equivalent to ten percent (10%)
of the AC of tile vehicle
 R = Remaining useful life (as defined in Section 4.2 above)
L = Estimated service life or the length of service life that may be
expected from it brand new model of a similar unit assuming
normal utilization
4.4 In the case of second-hand/reconditioned heavy equipment (for waste
management, construction and maintenance of roads and bridges) which includes,
but are not limited to, dump trucks, graders, payloaders, road rollers, cement
mixers and other related equipment, all pertinent data/specifications must be
provided by the requesting agency as basis for DBM evaluation considering that the
specifications/features vary according to manufacturer, size, capacity, intended use,
etc.
4.5 All second-hand/reconditioned vehicles to be purchased must be operational and in
good running condition. The general obsolescence of the transport and heavy
equipment, the availability of spare parts, and the quality, degree and extent of
repair and maintenance requirements must also be fully considered in the
acquisition of second-hand/reconditioned equipment. For this purpose,
certification/documentation pertaining to the aforementioned aspects must
accompany all requests for purchases of second-hand/reconditioned transport and
heavy equipment.
4.6 All purchases of second-hand/reconditioned transport and heavy equipment shall be
subject to existing policy guidelines on the acquisition of motor vehicles and the
applicable specifications/classifications prescribed under the attached RMVCSG.
5.0 ACQUITION OF MOTOR VEHICLES BY LOCAL GOVERNMENT UNITS (LGUs)

Pursuant to Administrative Order No. 339 entitled, Prescribing Guidelines and Specifications
of Motor Vehicles for Local Government Units, issued on June 6, 1997, Governors, City and
Municipal Mayors and Punong Barangays are authorized to purchase transport and heavy
equipment for their respective provinces, cities, municipalities and barangays out of
unencumbered local funds covered by an appropriations ordinance specifically
authorizing/earmarking the appropriations for the purpose, subject to specifications
prescribed therein.
Notwithstanding, however, purchases of motor vehicles by LGUs out of the Countrywide
Development Fund (CDF), other Special Purpose Funds, or out of any other appropriation
under the annual General Appropriations Act, shall be subject to the provisions of NBC No.
446, s. of 1995, and this Circular.
6.0 TYPOLOGY OF GOVERNMENT MOTOR VEHICLES

All acquisitions of motor vehicles that may be authorized for NGAs, GOCCs, SUCs and LGUs
shall be guided by the descriptive definition and information prescribed in the Typology Of
Government Motor Vehicles herewith attached as Annex A.
7.0 REVISED MOTOR VEHICLE CLASSIFICATION AND SPECIFICATIONS GUIDE

The maximum allowable specifications prescribed in the Revised Motor Vehicle Classification
and Specifications Guide herewith attached as Annex B, shall apply to all purchases and
rentals of motor vehicles that may be authorized for NGAs, GOCCs, SUCs and LGUs.
8.0 APPLICABILITY OF NBC No. 446

The provisions of NBC No. 446, s. of 1995, except those modified in this Circular, shall
continue to be applicable.
9.0 REPEALING CLAUSE
The provisions of NBC No. 446 which are inconsistent with this Circular are hereby
rescinded, repealed and/or modified accordingly.
10.0 EFFECTIVITY
This Circular shall take effect immediately.

(Signed)
SALVADOR M. ENRIQUEZ JR.
Secretary
Attached: Annex A Typology of Government Motor Vehicles
Annex B Revised Motor Vehicle Classification and Specification Guide
 Annex A
(NBC 446-A)

TYPOLOGY OF GOVERNMENT MOTOR VEHICLES

The typology of government motor vehicles prescribed herein shall apply to all acquisitions of motor
vehicles that may be authorized for NGAs, GOCCs, SUCs and LGUs.

Motor Vehicle Classification by Body Type

1. Car (Sedan or Hatchback) - a four-wheel enclosed automobile having four side doors (a rear
fifth door or tailgate hinged at the tap is present in hatchback models) and seating four to six
(4-6) passengers, including the driver, on two rows of seats (common configuration includes
split front seat and rear bench seat). The passenger cabin is separate from the limited
luggage compartment or trunk (located usually at the rear).

2. Passenger Wagon - a four-wheel enclosed automobile having five doors (four side doors
and a rear fifth door or tailgate) with one or more rows of folding or removable seats behind
the driver and no luggage compartment but an area behind the seats accessible through the
tailgate into which can be hauled luggage, cargoes, etc.. Seating capacity ranges from five
to ten (5-10) passengers, including the driver. The main difference between a sedan and a
wagon is the extra room for people and cargoes.

3. Passenger Van - a large four-wheel enclosed vehicle intended for conveying passengers
and/or hauling cargo, traditionally having four doors (two side doors for the driver and front
passengers, a single passenger side sliding door and a tailgate), a seating capacity ranging
from eight to fifteen (8-15) passengers, including the driver. It has several rows of folding or
removable seats behind the driver and no luggage compartment but an expandable area at
the rear into which can be hauled luggage, cargoes, etc. This type varies from full-size to
minivan models.

4. Pick-Up - a four-wheel compact truck with a low sided open cargo hauler, a passenger cab
(regular/single or extended/crew cab type) accommodating two to six (2-6) passengers on
split and/or bench seat, varying with two or four side doors, with fully imported chassis and
body. A pick-up truck is designed to carry both passengers and cargoes.

5. Asian Utility Vehicle (AUV) or High Side Pick-Up with Roof (HSPUR) - a fully or partially
enclosed four-wheel general purpose utility vehicle having two compartments, specifically,
the front cabin/cab with two side doors, seating three passengers, including the driver on a
full width seat, and the rear deck accommodating eight to sixteen passengers on facing
collapsible bench seats accessible through rear door(s), with locally manufactured chassis
and body.

6. Assembled Owner- or Passenger-Type Jeep/JitneyIJeepney - a fully or partially enclosed

four-wheel assembled general purpose utility vehicle with locally manufactured chassis and
body fitted with a reconditioned/surplus engine. An owner-type jeep can accommodate five
to seven (5-7) passengers on the split type or full width front seat and the two to three
folding or removable rear bench seats. Passenger-type jeepney /jitney has two
compartments, specifically, the front cabin/cab seating two to three (2-3) passengers,
including the driver on a full width seat or split front seat, and the rear deck accommodating
twelve to eighteen (12-18) passengers, on facing collapsible rear bench seats. Side and rear
doors are optional.

7. Bus/Mini-Bus - a four- or six-wheel heavy and long bodied motor vehicle with locally
manufactured or fully imported chassis and body, primarily designed to carry a
comparatively large number of passengers. A bus for government use varies from full size
bus, with a seating capacity not exceeding 60 passengers, including the driver, to a mini--
bus, with a seating capacity not exceeding thirty passengers.

8. Heavy Equipment - a large and heavy-fabricated automotive vehicle used in construction,

improvement, rehabilitation and maintenance of roads and bridges and other infrastructures,
waste management and environmental sanitation and related activities. Heavy equipment
may be sub-classified as earth moving equipment for moving earth/soil or other analogous
materials from one location to another which are relatively near each other, for leveling
uneven earth surfaces, and for similar projects; compaction equipment used to make the soil
rigid or well compacted in preparation for asphalting or paving (cementing); lifting equipment
which include cranes/hoists with boom and forklifts; excavating equipment for digging
ditches, canals or waterways, and the like; asphalting/concreting equipment used in
 transporting ready mixed asphalt/cement as well as those used for applying/leveling
asphalt/cement on the prepared soil; hauling equipment, which includes dump trucks,
garbage trucks, cargo trucks and trailers; and other types of equipment such as pile driving,
air pumping and shop equipment.

Motor Vehicle Classification by Service/Utilization

1. Medical Ambulance - a vehicle equipped with some basic medical/lifesaving apparatus or

equipment and the interior is specially designed for the conduction or conveyance of sick
and/ or injured persons; for use in hospitals and other government agencies/facilities where
an ambulance may be needed on stand-by at all times in case of emergency.

2. Patrol Vehicle - a motor vehicle (four-door sedan, AUV, owner-type jeep or motorcycle) for
use in patrol operations within a city or municipality proper or highway patrol operations
where speed and s1A1bility are critical when pursuing other speeding vehicles.

3. Fire Truck - an automotive vehicle or full size heavy-built truck for use in fire-fighting
functions, mounted/installed with the necessary equipment such as water tank, water
pumps, hoses, and other basic fire-fighting equipment. Simpler versions are
built/manufactured locally by some truck/body builders utilizing available chassis cab units.
The more sophisticated versions, such as those designed for high rise building fires, fully
equipped for the intended use, are imported from abroad.

4. Armored Vehicle - a four-wheel motor vehicle, armored (with metal protective covering), for
use in transporting large quantities of cash and/or highly valuable items such as gold and
the like. A bank or agency performing quasi-banking functions that would require the
transport of large amounts of money and valuables may be authorized to acquire an
armored vehicle. Locally available armored vehicles are built by truck/body builders utilizing
chassis cab units and fitting them with armored plate and other necessary armored vehicle
accessories.

5. All-Terrain Vehicle - a four-wheel large, usually heavy sport-utility type vehicle (SUV) with
high under-chassis clearance and capable for use in traversing rugged and mountainous
terrain or traveling off the road, usually with high piston displacements, powerful engine and
four-wheel drive mechanism. Seating capacity varies from four to eight (4-8) passengers on
front bucket or bench seats, regular rear bench seat and/or several optional rear bench
seats which can be reconfigured to accommodate passengers and/or cargoes.

6. Agency-Specific Purpose Vehicle - a custom-built motor vehicle for special application or

specific function/purpose.

Other Motor Vehicle Classifications

1. Motorcycle - a two-wheel motor driven road vehicle having one or two riding saddles and
sometimes a third wheel for support of a sidecar (if present) for use by field workers
assigned in the rural areas not normally accessible to four-wheel vehicles; for police and/or
highway patrol operations or similar purposes.

2. Tri-Wheel Vehicle - a three-wheel motor driven light vehicle with a prefabricated enclosed
posterior cab, having two wheels and rear door(s), fitted/attached to a
reconfigured/reinforced motorcycle, for hauling packages/cargoes and/or transport of
minimal number of passengers. A tri-wheel vehicle is distinct from a tricycle (a motorcycle
fitted with a sidecar).

3. Motorized Boat - a small and open vessel, engine powered, made of wood or fiberglass for
use on water to complement off-shore/inter-island transport and patrol operations.

4. Aircraft - a vehicle or carrier capable of flight in the air (i.e., navigation of the air, designed to
be supported by the air, either by the buoyancy of the structure or by the dynamic action of
the air against it surfaces) and includes engine powered airplanes, helicopters, and other
analogous vehicles.

5. Seacraft - an engine powered vessel intended for navigation on rivers, seas, oceans or
other navigable waters.