Samsung Gt-b5310 Service Manual
Samsung Gt-b5310 Service Manual
GT-B5310
1. Safety Precautions
2. Specification
3. Product Function
7. Block Diagrams
8. PCB Diagrams
9. Chart of Troubleshooting
This Service Manual is a property of Samsung Electronics Co.,Ltd. ⓒ Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law. 2009. 11. Rev.1.0
2. Specification
Mod. Bit rate/ 270.833 Kbps 270.833 Kbps 270.833 Kbps 270.833 Kbps
3.84Mcps/s
Bit Period 3.692 us 3.692 us 3.692 us 3.692 us
Modulation 0.3 GMSK 0.3 GMSK 0.3 GMSK 0.3 GMSK Up Link:2BPSK
Down Link:QPSK
MS Power 33 dBm~5 dBm 33 dBm~5 dBm 30 dBm~0 dBm 30 dBm~0 dBm MAX:24(+1.-3) dBm
MIN:<-50dBm
Power Class 5 pcl ~ 19 pcl 5 pcl ~ 19 pcl 0 pcl ~ 15 pcl 0 pcl ~ 15 pcl CLASS 3
Sensitivity -102 dBm -102 dBm -100 dBm -100 dBm -106.7 dBm
TDMA Mux 8 8 8 8 -
Cell Radius - 35 Km 2 Km - -
2-1
Specification
TX TX TX TX
Power EGSM850 Power EGSM900 Power DCS1800 Power PCS1900
control control control control
level level level level
Main Function
- 3M CMOS Camera
- CIF CMOS Camera
- TFT LCD 240*320
- Full Touch
- FM Radio
- Music Player
- Google Application
- Bluetooth
- WLAN
- AGPS
- USB 2.0
3-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
4. Array course control
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
5. Click the 'Boot', then the dialogue box is opened. Select the wanted directory, and
press 'OK'.
6. And the others('Amss', 'Rsrc1', 'Rsrc2', 'FactoryFS', 'FOTA', and 'ETC') are activated.
- Click 'AMSS', 'Rsrc1', 'Rsrc2', and 'FactoryFS' each, and select wanted files.
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
14. Recommedations
4-5
Reference Abbreviation
10-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1. Safety Precautions
● Repair after separate Test Pack and Set because for short danger (for example an
overcurrent and furious flames of parts etc) when you repair board in condition of
connecting Test Pack and tuning on.
● Take specially care of soldering, because Land of PCB is small and weak in heat.
● Surely tune on/off while using AC power plug, because a repair of battery charger is
dangerous when tuning ON/OFF PBA and Connector after disassembing charger.
● Don't use as you pleases after change other material than replacement registered on SEC
System.
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
Several semiconductor may be damaged easilly by static electricity. Such parts are called by
ESD(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
You can prevent from ESD damage by static electricity.
● Remove static electricity remained your body before you touch semiconductor or parts with
semiconductor. There are ways that you touch an earthed place or wear static electricity
prevention string on wrist.
● Use soldering removing tool to break static electricity. , otherwise ESD will be damaged by
static electricity.
● Don't unpack until you set up ESD on product. Because most of ESD are packed by box
and aluminum plate to have conductive power,they are prevented from static electricity.
● You must maintain electric contact between ESD and place due to be set up until ESD is
connected completely to the proper place or a circuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
5. Exploded View and Parts List
QRF06
QFR01
QCR97
QME03 QKP01
QME01
QMO01
QFU01
QCR71
QMP01
QKP02 QSH01
QVO01
QRF03 QCK01
QAR01
QLC01 QCR03
QCA02
QSP01
QAN02
QPC01
QCA01
QCK02
QFL01
QRE01
QCR72
QCR03
QBA01
QBC00
QBC01
5-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
6-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
6-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
6-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
6-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
6-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Main Electrical Parts List
6-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
9. Flow Chart of Troubleshooting
9-1. Power On
' Power On ' does not work
Yes
No
Check the Battery Voltage Change the Battery
is more than 3.3V
Yes
Yes
Yes
No
C423(VCORE_1.2V) = 1.24V? Check the U400
C426(VMEM_1.8V) = 1.8V
Yes
C420(VBB_D_2.9V) = 2.9V? No
C411(VDD_1.2V) = 1.2V? Check the U400 and BTC400
C403(VCXOPWR_2.8V) = 2.8V?
TA400(V_BATT) > 3.3V?
Yes
No
Check for the clock at
Check the TCX200 and U200
TCX200(R209) = 26MHz
Yes
Yes
END
9-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-2. Initial
Initial Failure
Yes
No
U400 pin D2(RESET\,R403) = 0V? Check the circuit connected to reset
Yes
IS No
[TP304,TP306,TP307,TP308,
TP310,TP311,TP312,TP313, Check the circuit related to UME300
TP314,TP315]
OK?
Yes
Yes
END
9-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
C430=5V? Resolder IFC400 or L402
Yes
No
C428=5V? Replace U402
Yes
Yes
END
9-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
Check the SIM connector's Resolder or change SIM400
(SIM400) connection to SIM card
Yes
No
Check the voltage at pin#1 of
SIM400 >= 3.0V ? Check the U400
Yes
No
Is there any signals pin#2,#3,#4
Check the U400
of SIM400 ?
END
9-7
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-8
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
Is the SMD status of
Replace the MIC.
microphone O.K?
Yes
No
Is the voltage of C536 Check UCP300
2.1V ?
Yes
No
Is the the path around MIC Replace the PBA.
bias circuit O.K?
Yes
END
9-9
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-10
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
No
Is the terminal of speaker Check the Speaker contact
OK? & change the speaker
Yes
Yes
Yes
END
9-11
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
<SPK contact>
9-12
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
Check the receiver FPCB soldering
Is the terminal of receiver OK? & change the receiver.
Yes
No
Is the LCD FPCB is OK? Change the LCD FPCB
(pin 1,2)
Yes
Yes
end
9-13
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-14
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
Check the wire soldering
Is the terminal of Motor OK? & change the motor
Yes
No
Is the signal high at R605? Check the UCP300
Yes
Yes
No
Is there any signals at U602 Check the UCP300
#7, #8, #10 pin ?
Yes
END
9-15
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-16
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
Is the LCD Slide FPCB Put the LCD Slide FPCB on HDC600
connected in HDC600?
Yes
No
C602=VBAT(3.8V)? check Battery connection
Yes
No
Is Slide FPCB OK ? Replace the Slide FPCB
Yes
Not OK
END
9-17
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-18
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
Yes
No
check the Voltage at
C132 (3.8V,VBAT), Check U400
C133 (2.9V)?
Yes
No
check the Voltage at
C136 (1.8V)? Resolder or Replace the U101
Yes
Yes
No
Is there any signal at Resolder or Replace the U101 or
C155 and C156? Resolder C155,C156
Yes
Yes
No
Check UCP300 Replace the UCP300
Yes
9-19
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-20
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-21
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
BT Connection disable
No
check the Voltage at
C132 (3.8V,VBAT), Check U400
C133 (2.9V)?
Yes
No
Check BT function Resolder or Replace the U101
ON
Yes
No
check the Voltage at Resolder or Replace the U101
C136 (1.8V)?
Yes
Yes
No
Check the assembled Resolder ANT102 or change
staus of ANT102 SPK MODULE
Yes
END
9-22
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-23
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-24
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
GPS ENABLE
No
check the Voltage at
C132 (3.8V,VBAT), Check U400
C133 (2.9V)?
Yes
No
check the Voltage at
Resolder or Replace the U101
C136 (1.8V)?
Yes
No
C171 = 26MHz Resolder or Replace the U101 or
Resolder or Replace the U104
Yes
No
Check the assembled Resolder ANT103 or change
staus of ANT103 REAR COVER
Yes
END
9-25
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-26
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-27
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
No
check the Voltage at
C131 (3.8V,VBAT), Check U400
C128 (2.9V)?
Yes
No
Check WLAN function Resolder or Replace the U102
ON
Yes
No
C171 = 26MHz and
Resolder or Replace the U102 or
TP402 =32.768KHz ?
Resolder or Replace the U104
Yes
No
Check the assembled Resolder ANT102 or change
staus of ANT102 SPK MODULE
Yes
END
9-28
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-29
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-30
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
CONTINUOUS RX on
RF input : EACH BAND CENTER
RX ON
CH
Cell Power : -50 dBm
Cell power : -50dBm
Yes
No
C104 ≥ -65dBm Resolder RFS100
Yes
No
Check FEM100 POWER
C101 = 2.8V (C416,C101.C107)
Yes
No
Check R102,3,4,5 ResolderR102,3,4,5
Well? or Change R102,3,4,5
Yes
No
Check FEM100 ok? Change FEM100
Yes
Check U200
END
9-31
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-32
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
TX ON (5 LEVEL:GSM
0 LEVEL: DPCS)
C105≥ 0dBm(DPCS) No
Check U200
C108≥ 0dBm(GSM)
Yes
No
C114 = Vbat Check Battery & C114,119
Yes
No
R101 ≥ 1.5 Check PAM100 & R101
Yes
L191 ≥ 28dBm(DPCS) No
L192≥ 30dBm(GSM) Check PAM100
Yes
Yes
Yes
END
9-33
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-34
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
CONTINUOUS RX on
RF input : 10700CH(B1)
3012CH(B8)
RX ON
Cell power : -50dBm
Yes
No
C104 ≥ -65dBm Resolder RFS100
Yes
Yes
No
L292 ≥ -68dBM(B8)
L295 ≥ -68dBM(B1) Check FEM100
Yes
No
C209 ≥ -74dBM(B8) Resolder or Change DUF200(B8)
C217 ≥ -74dBM(B1) DUF201(B1)
Yes
Check U200
END
9-35
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-36
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
No
C260(B1) Check around U200 (each TX path)
C248(B8) ≥ 0dBm
Yes
No
R211 = 1.5V Check around U201
Yes
No
L205(B1)
Check around PAM200
L219(B8) ≥ 15dBm
Yes
Yes
Yes
Yes
END
9-37
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-38
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-39
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-17. CAMERA
No
CAM KEY OK? Check TACT703
Yes
No
CAM FPCB
Connect FPCB to SLC600
Connect ok?
Yes
C606 = 1.8V No
C608 = 2.8V Check around U601,U603
C610 = 2.8V
Yes
No
Check SLC600 & Change SLC600, etc.
ZD603 ?
Yes
END
9-40
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-41
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
7. Block Diagrams
Main RF Block
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Block Diagrams
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Block Diagrams
Audio Block
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Block Diagrams
Camera Block
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
8. PCB Diagrams
8-1
8-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
11. Disassembly and Assembly Instructions
11-1. Disassembly
1 2
Direction of force
3 4
11-8
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5 6
7 8
11-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9 10
11 12
11-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
13 14
15 16
THE END
11-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
11-2 Assembly
1 2
4
3
11-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5 6
7 8
1) Attach the FPCB to the lower. 1) Attach the Shield Can to the hook of the board.
11-6
2) Screw 6 points to the front. 2) Screw 1 points to the board.
(TORQUE : 0.8~1.0) may change
SAMSUNG Proprietary-Contents(TORQUE without notice
: 1.0~1.2)
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9 10
1) Attach the SPK module to the board. 1) Put in the motor, connector by using the pincette.
2)
11 12
1) Screw the 1 point to the board. 1) Assemble the board with the front.
11-7
(TORQUE : 1.0~1.2) 2) Screw the 2 point to the board.
2) Attach the intenna to theSAMSUNGboard. Proprietary
(TORQUEmay change: 1.0~1.2)without notice
without Samsung's authorization
-Contents
Exploded View and Parts List
13 14
15 16
The END
11-8
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
www.s-manuals.com