Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 696 views

    Manufacturing Technology II Syllabus

    Uploaded by

    smg26thmay
    This document outlines the syllabus for the subject Manufacturing Technology II. The aim is to provide knowledge about metal cutting processes used in manufacturing. The syllabus covers 5 units: (1) the theory of metal cutting, (2) center lathes and special lathes, (3) shapers, planers, milling machines and drilling machines, (4) sawing, broaching and gear cutting, and (5) abrasive processes. Students will learn about operating lathes and special machines and performing various machining operations. The course is intended to help students understand various metal cutting and forming processes commonly used in manufacturing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Manufacturing Technology II Syllabus

    Uploaded by

    smg26thmay
    696 views1 page
    This document outlines the syllabus for the subject Manufacturing Technology II. The aim is to provide knowledge about metal cutting processes used in manufacturing. The syllabus covers 5 units: (1) the theory of metal cutting, (2) center lathes and special lathes, (3) shapers, planers, milling machines and drilling machines, (4) sawing, broaching and gear cutting, and (5) abrasive processes. Students will learn about operating lathes and special machines and performing various machining operations. The course is intended to help students understand various metal cutting and forming processes commonly used in manufacturing.

    Original Description:

    Manufacturing Technology Part II Syllabus

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the syllabus for the subject Manufacturing Technology II. The aim is to provide knowledge about metal cutting processes used in manufacturing. The syllabus covers 5 units: (1) the theory of metal cutting, (2) center lathes and special lathes, (3) shapers, planers, milling machines and drilling machines, (4) sawing, broaching and gear cutting, and (5) abrasive processes. Students will learn about operating lathes and special machines and performing various machining operations. The course is intended to help students understand various metal cutting and forming processes commonly used in manufacturing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    696 views1 page

    Manufacturing Technology II Syllabus

    Uploaded by

    smg26thmay
    This document outlines the syllabus for the subject Manufacturing Technology II. The aim is to provide knowledge about metal cutting processes used in manufacturing. The syllabus covers 5 units: (1) the theory of metal cutting, (2) center lathes and special lathes, (3) shapers, planers, milling machines and drilling machines, (4) sawing, broaching and gear cutting, and (5) abrasive processes. Students will learn about operating lathes and special machines and performing various machining operations. The course is intended to help students understand various metal cutting and forming processes commonly used in manufacturing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    SEMESTER SUBJECT L T P C

    IV MANUFACTURING TECHNOLOGY II 3 0 0 3

    Aim The aim of the subject is to provide knowledge in cutting process of manufacturing
    sector.
    Scope 1. To understand the metal cutting processes.
    2. To understand the types, construction and operations of lathes.
    3. To gain the knowledge of different operations on special machines
    4. To understand the types and operations of sawing, broaching and gear cutting
    machines.
    5. To learn the various machining processes that uses abrasives.
    Outcome The students would be able to operate lathe machines and special machines perform
    operations.

    UNIT – I THEORY OF METAL CUTTING 9


    Introduction: metal cutting methods - mechanics of metal machining –chip formation – types of
    chips-chip breaker- Merchant Circle Diagram-cutting force calculation- Single point cutting tool
    nomenclature-Cutting tool materials –Tool wear - Tool life - cutting fluids.

    UNIT – II CENTRE LATHE AND SPECIAL PURPOSE LATHES 9


    Centre lathe- constructional features and various operations- taper turning methods- thread cutting
    methods- special attachments- machining time and power estimation.
    Capstan and turret lathes - automats – Swiss type–automatic screw type.

    UNIT – III SHAPER, PLANNER, MILLING AND DRILLING MACHINES 9


    Shaper– planer– slotting Machines – quick return mechanism – Milling Machines–milling cutters–
    operations; Drilling- reaming– boring– tapping.

    UNIT – IV SAWING - BROACHING AND GEAR CUTTING 9


    Sawing machine: hack saw- band saw- circular saw; broaching machines –types-working
    principle-nomenclature. Gear Generation: forming- shaping- hobbing

    UNIT – V ABRASIVE PROCESSES 9


    Abrasive processes: grinding wheel – specifications and selection- types of grinding machines.
    Honing- lapping- super finishing- polishing and buffing.

    TOTAL HOURS :45

    TEXT BOOKS
    1. Serope Kalpajian- Steven R.Schmid- Manufacturing Engineering and Technology- Pearson
    Education- Inc. 2002 (Second Indian Reprint).
    2. Rao- P.N. “Manufacturing Technology”- Metal Cutting and Machine Tools- TMH- 2003.
    3. Hajra Choudhury- Elements of Workshop Technology- Vol. I and II- Media Promoters Pvt
    Ltd.- Mumbai- 2001

    REFERENCES
    1. Richerd R. Kibbe- John E. Neely- Roland O. Merges and Warren J. White- “Machine Tool
    Practices”- Prentice Hall of India- 2003.
    2. P.C. Sharma- “A Text Book of Production Engineering”- S. Chand and Co. Ltd- IV edition,
    2002.
    3. Hajra Choudry, “Elements of Work Shop Technology – Vol. II”- Media Promoters. 2002.
    4. B.L.Juneja G.S.Sekhon nithsethan ‘’Fundamentals of metal cutting and machine tools’’

    You might also like