ANFO Tds

ANFO (Bagged) Technical
Prilled Ammonium Nitrate Information
Properties
Explosives Class: 1.1D U.N. No: 0082
Density
Poured (g/cm3) 0.80 - 0.85
Pneumatically Loaded (g/cm3) 0.85 - 0.95
Energy1 (MJ/kg) 3.7
RWS (%) 100
RBS
Description Poured2 (%) 100
ANFO is a nominal 94:6 blend of Detaprill® low density ammonium nitrate Blow Loaded3 (%) 116
and diesel fuel oil
oil. It is a dry free running product
product, usually coloured for Minimum Hole Diameter
identification. Poured (mm) 75
Blow Loaded (mm) 25
Application Water Resistance Nil
ANFO has a wide variety of applications in dry hole blasting conditions. It is
1 All Dyno Nobel energy values are calculated using a
one of the most cost effective blasting agents available for use in large hole
diameter mining through to small hole diameter quarrying.
quarrying Pneumatically proprietary Dyno Nobel thermodynamic code
code. Other
loaded, ANFO is also effective in underground development and tunnelling programs may give different values.
2 Nominal poured density of ANFO of 0.82 g/cm3.
applications.
3 Nominal blow loaded density of ANFO of 0.95 g/cm3.
Features & Benefits
•ANFO is a dry and free flowing product, allowing delivery by loose pour
or pneumatic loading.
loading
•The low bulk density of ANFO provides excellent charge distribution in the
blasthole.
•ANFO provides excellent heave energy.
Dyno Nobel Asia Pacific Pty Limited

282 Paringa Road
Gibson Island, Murarrie QLD 4172
Australia
ANFO (Bagged) Technical
Prilled Ammonium Nitrate Information
Recommendations Safe handling, transportation & storage

Use - ANFO should only be used in dry holes.
holes To realise the maximum energy First Aid - Detailed first aid information regarding this product is contained on
available and reduce run up distances, it is recommended to prime ANFO with an the relevant Dyno Nobel Material Safety Data Sheet.
HDP cast booster for all hole diameters. Depending on the application, ANFO may
be primed with a suitable diameter detonator sensitive Powermite® Pro cartridge. Safety - All explosives are classified as dangerous goods and can cause
For specific priming requirements, please contact your Dyno Nobel representative. personal injury and damage to property if used incorrectly.
The VoD of ANFO is dependent on the hole diameter, with VoD reducing as the
hole diameter reduces.
reduces Transportation and Storage - All explosives must be handled,
handled transported and
stored in accordance with all relevant regulations. Stock should be rotated
Water Resistance - ANFO has no water resistance. such that older product is used first.
Shelf Life - ANFO has a maximum shelf life of six (6) months dependent on
temperature and humidity conditions. Storage in a high humidity and high The information and suggestions contained in this document concern explosive products
temperature
p environment will accelerate p product breakdown and should be that should only be dealt with by persons having the appropriate technical skills, training
avoided. Signs of ANFO degradation are hardening or caking which can lead to and licence. The results obtained from the use of such products depend to a large
degree on the conditions under which the products are stored, transported and used.
difficulty in loading and as a result, may lead to poor blasting performance.
While Dyno Nobel makes every effort to ensure the details contained in the document
Sleep Time - Under normal conditions in dry and stemmed blast holes, ANFO may are as accurate as possible, the conditions under which the products are used are not
be slept for periods up to six (6) months. The sleep time may be limited to the within its control. Each user is responsible for being aware of the details in the document
recommended sleep time of the initiating system. The presence of water will and the product applications in the specific context of the intended use. If technical
dramatically reduce the sleep time. advice is required in the specific application of the products then you should contact
Dyno Nobel for assistance.
Ground Temperature – ANFO is suitable for use in ground with a temperature of
Dyno Nobel makes no warranties in relation to the products it sells other than those
0°C to a maximum of 55°C. For application in ground at higher temperatures,
implied by law. Except to the extent determined by law, Dyno Nobel bears no risk,
please consult your local Dyno Nobel representative and Regulatory Authority. responsibility or liability arising from the use of the products and the information in this
document by the buyer or user of the products.
P k i
Packaging
® Detaprill and Powermite are registered trademarks of the Dyno Nobel Group.
Bagged ANFO is available in packaged form varying from bulk bags (500 kg) © Dyno Nobel Asia Pacific Pty Limited. 2009 Reproduction without permission strictly
through to smaller plastic bags (10, 20 and 25 kg). All bags are delivered on one prohibited.
(1) tonne product only weight pallets i.e. 2 x 500 kg, 100 x 10 kg, 50 x 20kg and 40
x 25 kg plastic bags per pallet. VERSION NO.: 4.0
Last Updated: 12/09
Dyno Nobel Asia Pacific Pty Limited

282 Paringa Road
Gibson Island, Murarrie QLD 4172
Australia

ANFO Tds

Uploaded by

Copyright:

Available Formats

ANFO Tds

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ANFO Tds

Uploaded by

Copyright:

Available Formats

ANFO (Bagged) Technical

Prilled Ammonium Nitrate Information

Explosives Class: 1.1D U.N. No: 0082

Dyno Nobel Asia Pacific Pty Limited

Recommendations Safe handling, transportation & storage

Dyno Nobel Asia Pacific Pty Limited

You might also like