Sagarmatha Engineering College
Sagarmatha Engineering College
Sagarmatha Engineering College
A
REPORT
ON
Name Description
1. Snips Snips, also known as shears, are hand tools used
to cut sheet metal and other tough webs. There are
two broad categories: tinner's snips, which are
similar to common scissors, and compound-action
snips, which use a compound leverage handle
system to increase the mechanical advantage.
3. Center Punch A small steel tool with a conical tip used to punch
a small indentation at the location of the centre of
a hole to be drilled.
# Conclusion:
We should wear aprons while working at the workshop. Drilling should be done only
after center punching on the work piece. Work piece should be carefully clamped while
drilling. All the tools should be handled properly with lots of care. The edges of
dustpan should be burr in order to get rid of injuries.We can know how the dust pan is
made.We also know about the tools used in it. We can make anything which is used in
our daily life.
# References:
Google
Wikipedia
Workshop teacher