I n t e r n at i o n a l D ata S h e e t

Super Centurion 250 Fire Hydrant ®

Reliable
ReliableConnections
Connections
TM
TM

Product Features
§ • 3-way and 4-way hydrant: • Full flow performance – large radius
250psig/17barg maximum working hose and pumper openings and conical
pressure, 500psig/34barg test pressure.* Upper Valve Plate reduce turbulence and
• UL Listed and FM Approved (CE marked provide low friction loss.
to EN14384 available). • Field replaceable, O-ring sealed Hose
• Meets or exceeds all applicable and Pumper Nozzles – threaded in place
requirements of ANSI/AWWA C502 and and retained by stainless steel locks–
ANSI/NSF 61/372. NST or BSP threads. Integral Storz
• O-ring sealed Bonnet, Ground, and Shoe connector also available to order.
Flange – better leak resistance, easier • O-ring sealed Bronze Seat Ring –
maintenance. Resists corrosion and easily removed for
• O-ring sealed Oil Reservoir with Filler maintenance through top of hydrant.
Plug – permits easy check of oil level • Traffic Flange and stainless steel Stem
and refill without removing Bonnet; filled Coupling – if hydrant is hit, flange and
at factory. coupling break free preventing damage to
• Automatic operating mechanism stem and main valve, and uncontrolled
lubrication – positive lubrication of stem water flow – coupling will not break into
threads and bearing surfaces each time pieces that could drop down and affect
hydrant is operated. valve operation.
• Super Centurion 350 Hydrants with • Double Bronze Drains – each time main
350psig/24barg maximum working valve opens or closes, drain valves force-
pressure, 700psig/48barg test pressure flush drain openings to keep them open
available. for barrel drainage.
• Inlet Connections: 6”/DN150 Flanged
ANSI B16.1 Class 125 Flat Face (optional
PN10, PN16 drilling).

Available as: 3-hose, 4-hose, 3-hose and 1-pumper;

2-hose and 2-pumper configurations
– A421 41/2” (114mm) main valve opening 3-way
(2-hose nozzle/1-pumper nozzle)
32” – A423 51/4” (133mm) main valve opening 3-way
(†) (812mm)
(2-hose nozzle/1-pumper nozzle)
18” 1 5/8” – A454 51/4” (133mm) main valve opening 3-way (3-hose nozzle)**
(457mm) (41mm) – A455 51/4” (133mm) main valve opening 4-way (4-hose nozzle)**
– A458 51/4” (133mm) main valve opening 4-way
(3-hose nozzle/1-pumper nozzle)**
– A459 51/4” (133mm) main valve opening 4-way (2-hose nozzle/
2-pumper nozzle), UL Listed and ANSI/AWWA C502

Bury
18” (457mm)
Min.
Longer at
6” (152mm)
Intervals

A459 A458 A454 A455

*2-way is a 200psig/12barg rated Centurion Hydrant.
**Hose Gate Valves required on FM Approved Models.
† Tall snow bury version (24”/600mm) available. Details upon request.

Mueller Co. International Division • 6125 Preservation Dr., Suite 200 • Chattanooga, TN 37416 USA
p +1.423.490.9555 • f +1.423.531.0033 • international@muellercompany.com • mueller-international.com
Reliable Connections Form 12921 – Rev 09/17
TM
Super Centurion 250 Fire Hydrant ®

Reliable Connections
TM

Parts List A-1

A-1 Operating Nut
A-85
A-85 Weather Seal 1
ID PART NAME MATERIAL A-3
A-3 Hold Down Nut O
A-11 Operating Nut Bronze ASTM B584 A-84
A-84 Hold Down Nut
A-3 Hold Down Nut O-Ring Rubber ASTM D2000 BUNA N A-5
A-5 Bonnet O-Ring 1
A-5 Bonnet O-Ring Rubber ASTM D2000 BUNA N A-6
A-6 Anti-Friction Wash
A-6 Anti-Friction Washer Acetal A-7
A-7 Oil Filler Plug
A-7 Oil Filler Plug Brass ASTM B16 A-8
A-8 Bonnet
A-9
A-9 Bonnet Bolt & Nut
A-8 Bonnet Cast Iron ASTM A126 CL.B
A-10
A-10 Bonnet Flange O-
A-9 Bonnet Bolt & Nut Steel J429 GR. 2
A-11
A-11 Upper Stem
A-10 Upper Barrel O-Ring2 Rubber ASTM D2000 BUNA N
A-12
A-12 Stem O-Rings 1
A-11 Upper Stem Steel ASTM A576 GR.1117 A-13
A-13 Nozzle Locks (Pu
A-12 Stem O-Ring Rubber ASTM D2000 BUNA N A-14
A-14 Pumper Nozzle
A-13 Nozzle Lock Stainless Steel ASTM A276 A-15
A-15 Pumper Nozzle G
A-14 Pumper Nozzle Bronze ASTM B584 A-16
A-16 Pumper Nozzle O
A-15 Pumper Nozzle Cap Gasket Rubber ASTM D2000 Neoprene A-17
A-17 Pumper Nozzle C
A-16 Pumper Nozzle O-Ring Rubber ASTM D2000 BUNA N A-18
A-18 Hose Nozzle
A-17 Pumper Nozzle Cap Cast Iron ASTM A126 CL.B A-19
A-19 Hose Nozzle Gas
A-18 Hose Nozzle Bronze ASTM B584 A-20
A-20 Hose Nozzle O-R
A-19 Hose Nozzle Gasket Rubber ASTM D2000 Neoprene A-21
A-21 Hose Nozzle Cap
A-20 Hose Nozzle O-Ring Rubber ASTM D2000 BUNA N A-22
A-22 Chain
A-21 Hose Nozzle Cap Cast Iron ASTM A126 CL.B A-23
A-23 Chain Connector
A-22 Cap Chain Plated Steel A-24
A-24 Upper Barrel
A-23 Chain Hook Plated Steel A-25
A-25 Safety Stem Coup
A-24 Upper Barrel Cast Iron ASTM A126 CL.B A-26
A-26 Safety Flange Bol
A-25 Stem Coupling Stainless Steel ASTM A890 A-27
A-27 Safety Flange O-R
A-26 Traffic Flange Bolt & Nut Steel SAE J429 GR. 2 A-28
A-28 Safety Flange 4
A-27 Traffic Flange O-Ring3 Rubber ASTM D2000 BUNA N A-29
A-29 Cotter Pin 4
A-28 Traffic Flange Cast Iron ASTM A126 CL.B A-30
A-30 Clevis Pin 4
A-31
A-31 Lower Stem
A-29 Cotter Pin Stainless Steel ASTM A276
A-32
A-32 Lower Barrel
A-30 Clevis Pin Stainless Steel ASTM A276
A-33
A-33 Stem Pin
A-31 Lower Stem Steel ASTM A576 GR.1144
A-34
A-34 Drain Valve Facin
A-32 Lower Barrel Cast Iron ASTM A126 CL.B A-35 Drain Valve Facin
A-35
A-33 Stem Pin Stainless Steel ASTM A582 A-36 Upper Valve Plate
A-36
A-34 Drain Valve Facing Plastic A-37
A-37 Shoe Bolt & Nut 2
A-35 Drain Valve Screw Stainless Steel A-38
A-38 Drain Ring Housin
A-36 Upper Valve Plate Bronze ASTM B584 A-39
A-39 Top Seat Ring O-
A-37 Shoe Bolt & Nut Steel SAE J429 GR. 2 A-40
A-40 Drain Ring Housin
A-38 Drain Ring Housing O-Ring4 Rubber ASTM D2000 BUNA N
A-39 Top Seat O-Ring Rubber ASTM D2000 BUNA N A-42
A-42 Drain Ring
A-40 Drain Ring Housing Cast Iron ASTM A126 CL.B A-43
A-43 Seat Ring 3
A-41 Drain Ring Housing Nut/Bolt5 Steel ASTM A307 Plated § A-44
A-44 Bottom Seat Ring
A-42 Drain Ring Bronze ASTM B584 A-45
A-45 Main Valve 2, 3
A-43 Seat Ring Bronze ASTM B584 A-46
A-46 Lower Valve Plate
A-44 Bottom Seat O-Ring Rubber ASTM D2000 BUNA N A-47
A-47 Cap Nut Seal 2, 3
A-45 Reversible Main Valve6 Rubber ASTM D2000 SBR A-48
A-48 Lock Washer 2
A-46 Lower Valve Plate7 Cast Iron ASTM A126 CL.B A-49
A-49 Cap Nut
A-47 Cap Nut Seal Rubber ASTM D2000 BUNA N A-50
A-50 Shoe
A-48 Lock Washer Stainless Steel ASTM A276 A-51
A-51 Hydrant Lubricatin
A-49 Lower Valve Plate Nut Cast Iron ASTM A126 CL.B 1 – 1988 & newer models; all pre-1988 models use parts A-2
A-50 Shoe8 – Flanged Cast Iron ASTM A126 CL.B Weather Cap & A-4 Hold Down Nut. These parts are not shown &
must be used with a pre-1988 style Operating Nut, A-1.
A-841 Hold Down Nut Bronze ASTM B584 2 – 1997 & newer 3-way models; all pre-1997 models have flat gasket
A-851 Weather Seal Rubber ASTM D2000 EPDM 3 – 1997 & newer models; all pre-1997 models have flat gasket
A-51 10.5 oz. Hydrant Lubricating Oil (not shown) 4 – 1997 & newer models; all pre-1997 models have square gasket
5 – Used only on pre-1997 model hydrant – Not Shown
6 – 1997 & newer models only; pre-1997 models use non-reversible
Nozzle Information: main valve & lower valve plate – Not Shown
1/Pumper Nozzle (41/2”/DN110 NST or BSP) 7 – 1997 & newer models for reversible main valve; pre-1997 models
2/Hose Nozzles (21/2”/DN65 NST or BSP) use non-reversible main valve – Not Shown
8 – 6” MJ Shoe is Ductile Iron, ASTM A536
Copyright © 2017 Mueller Co., LLC. All Rights Reserved. The trademarks, logos and service marks displayed in this document herein
are the property of Mueller Co., LLC, its affiliates or other third parties. Products marked with a section symbol ( § ) are subject to
patents or patent applications. For details, visit www.mwppat.com. These products are intended for use in potable water applications.
Reliable Connections
TM

Please contact your Mueller Sales or Customer Service Representative concerning any other application(s).