L&M Valve M345 Replaceable Polymer Liner Knife Gate

3" thru 60"

Available in 300, 600, 900 psi or higher CWP design,

the unique M345 series of valve products with the
three-piece replaceable polymer liner offer reliability
and long life in a wide variety of tough applications.

Designed and proven in the most difficult

applications, the M345 offers superior
shutoff, flow and reliability when compared
to other knife gate valves. Additional, it is
used in many services not normally
considered as a knife gate application.

Features
• 300, 600, 900 psi or higher CWP design,
knife gate.
• Patented* design features a three-piece
replaceable polymer liner.

• Superior shutoff; not to exceed 20 cc water

per inch of diameter per minute at 40 psi,
half of MSS.

• Available with ANSI Class V shutoff in select

applications.

• Every valve is tested for shutoff in both

directions.

• Can be installed without worry as to

direction of flow.

• 100% full port opening reduces

pressure drop allowing greater flow and
minimizing wear.

• T-Lock insert is firmly retained by the body

liner, assuring maximum performance.

• Liner provides all-around gate support and

prevents lateral movement of the gate,
giving you longer packing life and
a consistent valve seal.

• Positive seal packing chamber

Full range of operators and

accessories:
• Handwheel (standard)
The M345 is Like No Other Technical Data
• Bevel gear As you can see, the M345 is not an Size range: 2" thru 60"
(recommended 10" and above) ordinary knife gate valve. Offering you 300 M345 (300): 300 psi CWP at
psi or higher design, superior performance ambient temperature
• Lock-Pin for open, closed or both in flow, shutoff, flexibility both in design M345 (600): 600 psi CWP at
• Air/hydraulic/spring cylinders and installation, packing life, and overall ambient temperature
maintenance, the M345 can truly be called M345 (900): 900 psi CWP at
• Electric motor operators a Universal Valve. ambient temperature
• Control accessories
Notes Flanges drilled and
• Extension stems, floor stands, Stated leak rates apply to standard tapped to ASME
stem guides polymer lined versions only. B16.5/300 or as required
• Not all accessories or options are available * U.S. Patent Number 4,377,274
in all sizes and pressure ratings

www.tycoflowcontrol-eu.com Tyco reserves the right to change the contents without notice LMVMC-0107-EN-0808
 L&M Valve M345 Replaceable Polymer Liner Knife Gate
3" thru 60"

Three-Piece Field Replaceable Liner Assembly Back Liner

The three-piece liner of the M345 Series acts as the valve seat, gate support and packing support
and provides you excellent performance, long service life and ease of maintenance. The close
tolerance fit of the valve liner along with the line pressure gives you a tight shutoff. The liner also
provides all-around gate support preventing lateral movement of the gate, giving you longer Gate
packing life and a consistent valve seal.
Each liner is precision cut, placed into the valve frame and bonded with a silicone compound to
assure perfect alignment and a superior seal. Available in different materials to suit many
applications.
UHMWPE - (180°F), Ultra-high-molecular-weight polyethylene (UHMWPE) has excellent chemical,
abrasion and impact resistant properties with a good temperature range. It is widely used in the
pulp and paper, textile, packaging and mining industries.
Polypropylene - (225°F), A thermoplastic polymer with good impact and fatigue
properties. It is resistant to acids, alkalis and solvents.
PTFE (Teflon®) - (350°F), A polytetrafluoroethylene plastic with superior chemical resistant
properties at elevated temperatures. It has excellent anti-stick properties, however it has a
Insert
relatively poor resistance to wear and is not recommended for abrasive applications
Other custom liners are available for special and unique applications. Front Liner
Contact factory for additional information.

Available M345 Insert Styles

The M345 was designed for the demanding requirements found in many industrial applications.
The standard M345 features a T-Lock Insert that retains the seat section of the liner to the outer
sides. This assures maximum liner and seat performance in heavy solids.
Also available is the new ZP configuration, with a reinforced elastomer insert that acts as the seat
section and is built to match the valve port ID, providing you an uninterrupted, straight through
flow, reducing turbulence. This assures maximum liner and seat performance in heavy solids.
To further enhance performance of the M345, it can be provided with special fixed or replaceable
retaining rings to give long life in abrasive applications:
• Tungsten Carbide Coated
• Hard surface overlay
• UHMWPE, and others
T-LockInsert
T-Lock Insert

Special Alloys and Configurations

The L&M M345 can be provided with high grade alloy gates and rings such as titanium,
Hastelloy®, Alloy 20, etc. for aggressive applications. Combine this with a Teflon® liner and you
have a very effective high performance knife gate valve.
The M345 can also be built in square or rectangular designs specific to your dimensions and
applications.

ZP Configuration
ZP configuration
Notes
elastomer insert
Elastomer Insert
1. Hastelloy® is a registered trademark of
Haynes International
2. Teflon® is a registered trademark of
E.I. du Pont de Nemours and Company

Tyco reserves the right to change the contents without notice

 L&M Valve M345 Replaceable Polymer Liner Knife Gate
3" thru 60"

Features

Cast ductile iron handwheel (bevel gear

recommended for sizes 10" and larger)

Self-locking handwheel retaining nut

Acid-resistant bronze stem nut

smooth operation

Heavy cross-section 304 stainless

steel stem, single-lead Acme threads
for ease of operation The rugged construction of the
M345 sets the standard for a true,
Heavy fabricated yoke from channel heavy duty, high performance
or T-Bar knife gate valve.

Heavy reinforced packing gland

Locknuts used on all bolting

Multiple rows of packing

Three-piece field replaceable polymer liner,

available in UHMWPE, Teflon® and
Polypropylene, supports gate on all sides

Gate finished ground on both

sides for superior bi-directional
shutoff and minimum rim-pull

Flanges drilled and tapped to

ASME B16.5/300

Stainless steel retaining rings/raised face

Full port flow area through 24"

Fabricated steel body provides

superior strength

Bonneted Body Style Specification

The M345 is available in a bonneted Bonnetless, Universal Knife Gate Valve, (300) (600) (900) psi design for (300) (600) (900) psi CWP,
configuration for critical applications; specify wafer type with BI-DIRECTIONAL shutoff up to the full rated pressure of (300) (600) (900) psi
the M341. CWP. Valve shall have a maximum leakage rate of no more than 20 CC per inch of diameter per
minute at 40 psi in both directions without the use of O-rings, guides or wedges obstructing the
port. The liner shall be made from a resilient material suitable for the application and completely
field replaceable. Made from three-separate pieces; the front, back and T-Lock insert, the liner
shall completely line the interior of the valve body, totally supporting the gate. The liner insert is to
be “T” shaped to accommodate the front and back liner pieces, preventing insert pullout in
severe applications. To prevent atmospheric leakage, the valve features an adjustable packing
assembly consisting of multiple layers of braided packing around gate, evenly compressed by a
one-piece packing gland. The valve to have 100% FULL PORT FLOW AREA with no guides or
wedges obstructing the port. The gate shall be finished ground on both sides made from
stainless steel (or as required for application). The body material shall be fabricated carbon steel
or 316 SS depending on application needs, drilled and tapped to ASME B16.5/300 or as
required. Valve is equipped with a manual handwheel operator assembly featuring a cast ductile
iron handwheel, a heavy duty foot mounted yoke with an acid resistant bronze stem nut, including
a 304 stainless steel rising stem. Specify the L&M Valve Model M345 from Tyco Flow Control.

Tyco reserves the right to change the contents without notice

 L&M Valve M345 Replaceable Polymer Liner Knife Gate
3" thru 60"

Applications
Designed to provide superior performance in a wide variety of industries and applications:

Pulp & Paper Power Food & Beverage

• Green Liquor • White Liquor • Limestone Slurry • Fly Ash • Grain Hand • Sugar Pan
• Switching Valves • Black Liquor • Coal Transfer • Ash Sluice • Cereal Process • Brew Tank
• Mud • Lime • Slurry Tank • Bottom Ash • Potato Cooker Isolation
• Slurry • Scrubber • Settling Pond • Beer Vats
• Water Isolation • Mud Stock
• Weak Wash (1%-10%) Wastewater Powder & Bulk
• Brown Stock • White Water • Grit Chamber • Sludge Systems • Lime • Zeolite
• Machine Isolation • Lime Mud • Filter Press • Tank Isolation • Sand/Gravel • Plastic Pellets
• Starch Isolation • Pump/Screen • Pump Isolation
Isolation
Mining Chemical The above information represents previously
• Cyclone System • Ball Mill Crusher • Chromic Flake • Chip Transfer successful installations for the L&M M345,
• Ore Dredging • Rock Slurry • Acidic Water • Vacuum Reactors however, your application may be different.
• Soda Ash • Tailing Lines • Brine Please contact Tyco Flow Control for
• Pump Isolation • Fine Feed application recommendations.
•Hopper Loading • Thickener
•Coarse Feed Stock

Dimensions (inches) and Weight (lbs.)

Valve Size A B C D E F Weight A
2 12 63⁄4 21⁄4 2 187⁄8 203⁄4 60
3 12 81⁄2 21⁄4 3 21 24 70
4 12 101⁄4 21⁄4 4 231⁄8 271⁄4 75
5 18 111⁄4 21⁄4 5 267⁄8 313⁄4 100 F
6 18 123⁄4 21⁄2 6 295⁄8 417⁄8 120 E
8 18 151⁄4 3 8 333⁄4 483⁄8 185
10 24 173⁄4 3 10 383⁄4 451⁄4 250
12 24 203⁄4 31⁄4 12 495⁄8 54 425
14 24 231⁄4 31⁄2 14 541⁄8 607⁄8 535
16 24 253⁄4 33⁄4 16 59 671⁄2 710 B D
18 24 281⁄4 4 18 651⁄4 76 870
20 24 303⁄4 51⁄4 20 691⁄4 82 1250
C
24 24 361⁄4 51⁄2 24 781⁄8 951⁄4 1660

Dimensions are not certified and weights are

estimates. Contact factory for complete details.

Metric Dimensions (mm) and Weight (kgs.)

Valve Size A B C D E F Weight
2 305 171.5 57.2 50.8 479.4 527.1 27.2
3 305 215.9 57.2 76.2 533.4 609.6 31.8
4 305 260.4 57.2 101.6 587.4 692.2 34
5 457 285.8 57.2 127.0 682.6 806.5 45.4
6 457 323.9 63.5 152.4 752.5 1063.6 54.4
8 457 387.4 76.2 203.2 857.3 1228.7 83.9
10 610 450.9 76.2 254.0 984.3 1149.4 113.4
12 610 527.1 82.6 304.8 1260.5 1371.6 192.8
14 610 590.6 88.9 355.6 1374.8 1546.2 242.7
16 610 654.1 95.3 406.4 1498.6 1714.5 322.1
18 610 717.6 101.6 457.2 1657.4 1930.4 394.6
20 610 781.1 133.4 508 1759 2082.8 567
24 610 920.8 139.7 609.6 1984.4 2419.4 753

Dimensions are not certified and weights are estimates, contact factory for complete details

Tyco reserves the right to change the contents without notice