This document discusses balanced faults in power systems. It defines a fault as any failure that interferes with normal current flow. The most common types of faults are listed along with their relative frequencies of occurrence. Symmetrical or three-phase faults are the most severe but least common. Short circuit studies are important for designing protection schemes and selecting circuit breakers. Various types of reactances related to fault analysis are also defined, including synchronous, subtransient, and transient reactances. The document provides an example calculation of fault current.
This document discusses balanced faults in power systems. It defines a fault as any failure that interferes with normal current flow. The most common types of faults are listed along with their relative frequencies of occurrence. Symmetrical or three-phase faults are the most severe but least common. Short circuit studies are important for designing protection schemes and selecting circuit breakers. Various types of reactances related to fault analysis are also defined, including synchronous, subtransient, and transient reactances. The document provides an example calculation of fault current.
This document discusses balanced faults in power systems. It defines a fault as any failure that interferes with normal current flow. The most common types of faults are listed along with their relative frequencies of occurrence. Symmetrical or three-phase faults are the most severe but least common. Short circuit studies are important for designing protection schemes and selecting circuit breakers. Various types of reactances related to fault analysis are also defined, including synchronous, subtransient, and transient reactances. The document provides an example calculation of fault current.
This document discusses balanced faults in power systems. It defines a fault as any failure that interferes with normal current flow. The most common types of faults are listed along with their relative frequencies of occurrence. Symmetrical or three-phase faults are the most severe but least common. Short circuit studies are important for designing protection schemes and selecting circuit breakers. Various types of reactances related to fault analysis are also defined, including synchronous, subtransient, and transient reactances. The document provides an example calculation of fault current.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 3
EE 1352 POWER SYSTEM ANALYSIS
Questions and Answers
UNIT- III FAULT ANALYSIS - BALANCED FAULT
1. What is meant by a fault?
A fault in a circuit is any failure which interferes with the normal flow of current. The faults are associated with abnormal change in current, voltage and frequency of the power system. 2. Why faults occur in a power system? The faults occur in a power system due to Insulation failure of equipment Flashover of lines initiated by a lighting stroke Due to permanent damage to conductors and towers or due to accidental faulty operations. 3. List the various types of faults. (i) Series fault or open circuit fault One open conductor fault Two open conductor fault (ii) Shunt fault or short circuit fault. Symmetrical fault or balanced fault Three phase fault Unsymmetrical fault or unbalanced fault Line to ground (L-G) fault Line to Line (L-L) fault Double line to ground (L-L-G) fault 4. Write the relative frequency of occurrence of various types of faults. Types of fault Relative frequency of occurrence of faults Three phase fault 5% Double line to ground fault 10% Line to Line fault 15% Line to ground fault 70% . 5. State and explain symmetrical fault or balanced three phase fault. This type of fault is defined as the simultaneous short circuit across all the three phases. It occurs infrequently, but it is the most severe type of fault encountered. Because the network is balanced, it is solved by per phase basis using Thevenins theorem or bus impedance matrix or KVL, KCL laws. 6. What is the need for short circuit studies or fault analysis? Short circuit studies are essential in order to design or develop the protective schemes for various parts of the system .To estimate the magnitude of fault current for the proper choice of circuit breaker and protective relays.
Power system Analysis-Unit-3-Q-A 1
7. What is bolted fault or solid fault? A Fault represents a structural network change equivalent with that caused by the addition of impedance at the place of a fault. If the fault impedance is zero, the fault is referred as bolted fault or solid fault. 8. What is the reason for transients during short circuits? The faults or short circuits are associated with sudden change in currents. Most of the components of the power system have inductive property which opposes any sudden change in currents, so the faults are associated with transients. 9. What is meant by doubling effect? If a symmetrical fault occurs when the voltage wave is going through zero then the maximum momentary short circuit current will be double the value of maximum symmetrical short circuit current. This effect is called doubling effect. 10. Define DC off set current. The unidirectional transient component of short circuit current is called DC off set current. 11. What is synchronous reactance or steady state condition reactance? The synchronous reactance is the ratio of induced emf and the steady state rms current. It is the sum of leakage reactance (Xl) and the armature reactance (Xa). 𝑋𝑑 = 𝑋𝑎 + 𝑋𝑙 𝑋𝑎 𝑋𝑙
Fault
𝐸𝑔
12. What is sub transient reactance?
The synchronous reactance is the ratio of induced emf on no load and the sub transient symmetrical rms current. 𝑋𝑓
𝑋𝑙 𝑋𝑎
𝐸𝑔 Fault 𝑋𝑑𝑤
1 𝑋𝑑′′ = 𝑋𝑙 + 1 1 1 𝑋𝑎 + 𝑋𝑓 + 𝑋𝑑𝑤 13. What is transient reactance? The synchronous reactance is the ratio of induced emf on no load and the transient symmetrical rms current.
Power system Analysis-Unit-3-Q-A 2
𝑋𝑓
𝑋𝑙 𝑋𝑎
𝐸𝑔 Fault
1 𝑋𝑑′ = 𝑋𝑙 + 1 1 + 𝑋𝑎 𝑋𝑓 14. Define short circuit capacity of power system or fault level. Short circuit capacity (SCC) or Short circuit MVA or fault level at a bus is defined as the product of the magnitude of the prefault bus voltage and the post fault current. SCC or Short circuit MVA = |𝑉𝑝𝑟𝑒𝑓𝑎𝑢𝑙𝑡 | × |𝐼𝑓 | Or 1 SCC = 𝑋 𝑝. 𝑢 𝑀𝑉𝐴 𝑡ℎ 15. Find the fault current in fig., if the prefault voltage at the fault point is 0.97 p.u.? j0.2 F
j0.15 j0.15
j0.2 and j 0.15 are in series. j0.2+ j 0.15 = j 0.35
J0.35 is in parallel with j 0.15 𝑗0.35 × 𝑗0.15 𝑍𝑡ℎ = = 𝑗0.105 𝑝. 𝑢 𝑗0.35 + 𝑗0.15 𝑉 0.97 𝐹𝑎𝑢𝑙𝑡 𝑐𝑢𝑟𝑟𝑒𝑛𝑡 𝐼𝑓 = 𝑍𝑡ℎ = 𝑗0.105 = −𝑗 9.238 𝑝. 𝑢 𝑡ℎ 16. What is bus impedance matrix? Bus impedance matrix is the inverse of the bus admittance matrix.𝑍𝑏𝑢𝑠 = [𝑌𝑏𝑢𝑠 ]−1 The matrix consisting of driving point impedance and transfer impedances of the network is called as bus impedance matrix. Bus impedance matrix is symmetrical. 17. Give the methods available for forming bus impedance matrix. Form bus admittance matrix and take the inverse to get bus impedance matrix. Using bus building algorithm. Using L-U factorization of Y-bus matrix.
