Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    3.2.7 Submenu For Setting The Multicast Group Address: The Display Shows The Following

    Uploaded by

    grwg
    The document discusses the settings menu for configuring various network settings like the gateway IP address, multicast group address, and NTP server IP address on a device. It describes entering the octets of the IP addresses and adjusting other settings like the NTP synchronization interval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    3.2.7 Submenu For Setting The Multicast Group Address: The Display Shows The Following

    Uploaded by

    grwg
    11 views1 page
    The document discusses the settings menu for configuring various network settings like the gateway IP address, multicast group address, and NTP server IP address on a device. It describes entering the octets of the IP addresses and adjusting other settings like the NTP synchronization interval.

    Original Description:

    jztj

    Original Title

    temp7ece12867d587ec4593fc87d980d4591

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the settings menu for configuring various network settings like the gateway IP address, multicast group address, and NTP server IP address on a device. It describes entering the octets of the IP addresses and adjusting other settings like the NTP synchronization interval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    3.2.7 Submenu For Setting The Multicast Group Address: The Display Shows The Following

    Uploaded by

    grwg
    The document discusses the settings menu for configuring various network settings like the gateway IP address, multicast group address, and NTP server IP address on a device. It describes entering the octets of the IP addresses and adjusting other settings like the NTP synchronization interval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    The display shows the following:

    Enter the four octets of the gateway IP address step by


    step. Switch to the next digit or octet respectively by
    pushing the PB1S button. Octets are marked by letters A,
    b, C and d.

    By pushing the PB1L button, the entered values are stored and the clock returns to the
    menu item P22.

    3.2.7 Submenu for setting the multicast group address


    Choose the menu item P23 and then enter the submenu by pushing the PB1L
    pushbutton for setting the multicast group address. The item to be set is blinking.
    By pushing the PB2S button, the adjusted digit value is increased in steps of 1; by
    pushing the PB2L button, a continuous increase of the value takes place.
    The display shows the following:
    Enter the four octets of the IP address step by step.
    Switch to the next digit or octet respectively by pushing
    the PB1S button. Octets are marked by the letters A, b, C
    and d.
    By pushing the PB1L button, the entered values are stored and the clock returns to the
    menu item P23.

    3.2.8 Submenu for the setting of the NTP unicast synchronization


    Choose the menu item P24 then enter the submenu by pushing the PB1L pushbutton
    for setting the parameters of the NTP unicast synchronization. The item to be set is
    blinking.
    By pushing the PB2S button, the adjusted digit value is increased in steps of 1; by
    pushing the PB2L button, the value will be continuously increased.
    The display shows the following:
    Set the four octets of the NTP server’s IP address step by
    step. Switch to the next digit or octet respectively by
    pushing the PB1S button. Octets are marked by letters A,
    b, C and d.
    After the last octet setting, set the constant x which determines the interval of
    synchronization in seconds.

    By pushing the PB1L button, the entered values are stored and the clock returns to the
    menu item P24.

    Note: Through the setup menu is possible to set only one NTP server IP address.
    If more than one NTP server addresses were previously configured (using telnet or
    MOBA-NMS tool), after opening the P24 submenu the IP address of currently active
    NTP server is displayed. When the IP address was modified and the configuration is
    saved using the setup menu, the IP address is stored to the definition of the first NTP
    server, the other NTP server addresses are cleared including those defined by the NTP
    server domain names.

    3.2.9 Temperature description and time-zone names definition


    (MENU page no. 2)
    Choose the items R8 or R9 for temperature description or the items R10 – R14 for
    time-zone names definition in the menu page no. 2 and push the PB1L button to enter
    © MOBATIME 19 / 56 800444.05

    You might also like