Portable Ventilator Fan Operation Manual
Portable Ventilator Fan Operation Manual
Portable Ventilator Fan Operation Manual
globalindustrial.com Models
246340
Portable Ventilator Fan 246343
Operation Manual
WARNING
• Electric shock hazards - May cause severe personal injury
or death. For your safety, turn off electric power supply
before installing. Unplug unit before moving or servicing
your fan. Never make adjustments to the fan when power
is on.
• Do not remove the power supply cord, ground prong or
ground fault unit. Do not alter power cord. For your
personal safety, the fan must be grounded. Removal or
tampering of power cord will void warranty. Never use an
extension cord to connect the fan to an outlet. All
installations must be made into a grounded outlet. Unplug
the fan when not in use.
• To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device. This plug is
intended to fit an outlet only one way. If this does not fit
outlet, contact a qualified electrician. Do not attempt to
MAINTENANCE AND STORAGE
bypass this procedure. • To keep the fan clean, use a dry cloth to wipe the surface
of the fan.
• If the power supply cord is damaged, contact your local
service center or a qualified electrician to install an • Do not clean the fan with a chemical solution as this may
appropriate replacement cord to prevent any injury damage the coating and plastic parts.
or damage. • Never clean the fan in water.
• Fan should always be stored indoors.
CAUTION
• Read and follow all instructions before operating fan. Do not FEATURES:
use fan if any part is damaged. • Large capacity E-class motor.
• Appliance should not be used in locations where corrosive • Specially designed axial propellers.
or explosive atmosphere (dust, vapor or gas) exists. • High static pressure.
• Never insert fingers or objects through the grill guard when • High flow rate.
fan is in operation. Disconnect the fan when removing guard
• Excellent strength.
for cleaning.
• Make sure the fan is on a stable, flat surface when
in operation.
• Do not use fan in windows. Rain may create an
electrical hazard.
Blade Static
Size” Model Dia. Voltage Frequency Phase Poles Watts Flow Rate RPM Pressure
(mm) (V~) (Hz) (W) CFM
8 246340 200 120 60 1 2P 165 1589 3300 480
12 246343 300 120 60 1 2P 430 2931 3300 520
Portable Ventilator Fan Operation Manual 8/5/10 2:40 PM Page 2
globalindustrial.com
Attaching Duct
to Ventilator Fan
1 2
3 4
Open & unfurl the quick-connect Wrap the quick-connect end over
end of ducting. the edging of blower fan.
Note: Quick-connect end includes Note: Wrap ducting over air outlet
tie-string. for ventilation or over the air inlet
for exhausting applications.