LCD Electronic Thermostat

EXT-RCF-24, EXT-RCP-24

Application
EXT-RC series of proportional and floating thermostats are used to control room
temperature in commercial applications.

Features
• LCD with green backlight
• Detects and displays room temperature
• On/Off capability of cooling and heating equipment
• Room temperature setting
• Fahrenheit (°F) or Celsius (°C) display
• Selectable single or three speed fan control

1 • Remote sensor input

Technical Data Dimensions (mm)

Power AC 24V +10%, 50Hz/60Hz
Output signal AC 24V x 2 (0.5A resistive)
EXT-RCP-24 0-10 VDC (5 mA) / 4-20 mA (600Ω)
Output signal AC 24V x 2 (0.5A resistive)
EXT-RCF-24 floating point control
Input signal dry contact (NO)
Dimensions 3.4” w x 3.4” h x 0.9” d [86mm x 86mm x 23mm]
Fixing screw width 60mm (standard)
Set temperature range 0° to 99.5° adjustable
Accuracy displayed 0.1°
Accuracy +0.5°
Rated power < 1W
Sensor type NTC
Display LCD

Basic Features
Working modes Cooling , Heating , Ventilating , Auto
Fan speed 3 speed ( Low , Medium , High ) / Auto

Operation Instructions
O56001 03/12 - Subject to change. © Belimo Aircontrols (USA), Inc.

On/Off Press button.

Setpoint Press to reduce the setpoint, press to increase the setpoint
in 0.5°C increments. The setpoint will be confirmed automatically
after 5 seconds and then will return to display status. Press or
to check setpoint.
Mode Press to change the working mode- Cooling , Heating ,
Vent .
Fan speed Press to select the desired speed- low , medium , high ,
or auto . If single speed fan is chosen, only medium speed will
be available.
Auto speed The fan speed will be changed automatically to the following:
Low speed- when room temperature is 1° difference with setpoint.
Med. speed- when room temperature is 2° difference with setpoint.
High speed- when room temperature is 3° difference with setpoint.
Sleep Thermostat will go into sleep function after programming.
To set:
Press button for 3 seconds until display shows. A countdown
will start in the center of the screen. Use or to adjust the
desired sleep time. The maximum setting is 48 hours. Thermostat
will return to working status after 5 seconds. will flash to start
countdown. The setpoint will be replaced by the sleep setpoint.
To quit: When the thermostat is in sleep function, will flash. Press or
to quit.
Keypad lock Press and for 10 seconds. This will activate the display.
under this function, the keypad is locked. To unlock, press and
for 10 seconds until disappears.
Set parameters With thermostat off, press for 10 seconds to enter the menu to set
all parameters.

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

LCD Electronic Thermostat
EXT-RCF-24, EXT-RCP-24

Parameter Settings Wiring Diagrams

Parameter Description Default Range
1 Power on status (0: off, 1: on, 2: hold) 2 -
2 Fan speed (0: single speed, 1: three speed) 1 -
3 Fan mode (DA: When the temperature 0 -
reaches the set-point, the valve will close COM
L
with the fan still running. DB: When the ~
24VAC TR
N
temperature reaches the set-point, the VC CLOSE

valve will close and the fan will shut off.) VO

OPEN
A
4 Sensor selection (0: internal, 1: remote) 1 - Floating Control
Cooling/Heating
L B
5 Temp. display (0: Celsius, 1: Fahrenheit) 0 -
6 Temperature calibration 0 -20 to +20 HI Input

7 Minimum setpoint 5° / 41° 0 to 99 MED Input

8 Maximum setpoint 35° / 96° 0 to 99.5 Fan LOW RS

9 Dead band 2 - EXT-RCF-24 Remote Sensor

EXT-RCF-24
Modulating Output Options
Location ON OFF
1 120 ohm resistance between AB wires No resistance between AB wires
2 Port 1 modulation 0-20 mA Off 0-10V
~
M
3 Port 1 modulation 0-10 VDC Off V+ /4-20mA
~ L
24VAC TR
Modulating Control N
4 Port 2 modulation 0-20 mA Off Cooling/Heating

5 Port 3 modulation 0-10 VDC Off

A
Note: Switch (5 pole switch on PCB)
L B

HI Input

MED Input

Fan LOW RS
Remote Sensor
EXT-RCP-24

EXT-RCP-24

O56001 03/12 - Subject to change. © Belimo Aircontrols (USA), Inc.

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

 LCD Electronic Thermostat
EXT-RCF-24, EXT-RCP-24

Installation Manual
Mounting Method

1 Open the back panel with a screwdriver. 2 Connect the wires per the wiring diagram.

3 Secure the base with the screws provided. 4 Reattach the front panel.
O56001 03/12 - Subject to change. © Belimo Aircontrols (USA), Inc.

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

Belimo worldwide: www.belimo.com
BELIMO Americas
USA Locations, 43 Old Ridgebury Road, Danbury, CT 06810
Tel. 800-543-9038, Fax 800-228-8283, marketing@us.belimo.com
1049 Fortunato Loop, Sparks, NV 89436
Tel. 800-987-9042, Fax 800-987-8875, marketing@us.belimo.com

Canada Locations, 5845 Kennedy Road, Mississauga, Ontario L4Z 2G3

Tel. 866-805-7089, Fax 905-712-3124, marketing@us.belimo.com

Latin America and the Caribbean Customer Service

Tel. 203-791-8396, Fax 203-791-9139, marketing@us.belimo.com

Belimo Brasil Comércio de Automação Ltda.

Tel: 55 11 3643-5656, Fax: 55 11 3643 5657, atendimentoaocliente@br.belimo.com.