Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
357 views

Tata Consulting Engineers Limited: 1.0.material Properties

This document provides calculations to determine the crack width of a concrete beam section. It includes the material properties, section properties, loads, and step-by-step calculations. The concrete grade is M25 and rebar grade is 415 MPa. The unfactored bending moment is 42.7 kN/m. The calculations determine the neutral axis depth, cracked moment of inertia, tensile stress in steel, and crack width. The crack width of 0.08482 mm is determined to be safe within code limits.

Uploaded by

Nitesh Singh
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
357 views

Tata Consulting Engineers Limited: 1.0.material Properties

This document provides calculations to determine the crack width of a concrete beam section. It includes the material properties, section properties, loads, and step-by-step calculations. The concrete grade is M25 and rebar grade is 415 MPa. The unfactored bending moment is 42.7 kN/m. The calculations determine the neutral axis depth, cracked moment of inertia, tensile stress in steel, and crack width. The crack width of 0.08482 mm is determined to be safe within code limits.

Uploaded by

Nitesh Singh
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

BY:BDK TATABY:BDK

CONSULTING ENGINEERS LIMITED PROJECT:SEZ PROJECT

DATE: CLIENT: COSMO FILMS LTD. DOC. NO.:

CHD.: SUBJECT: Crack Width

DATE: JOB NO.: TCE.6390A OFFICE:DV DISC.:CV SH. OF REV. NO.:

1.0.MATERIAL PROPERTIES
Grade of Concrete,fck = M25 N/mm2

Grade of steel,fy = 415 N/mm2


Modulus of elasticity of steel,Es = 200000 N/mm2 IS 456-2000 Cl.5.6.3

Modulus of elasticity of concrete,Ec = 5000 fck = 25000 N/mm2 IS 456-2000 Cl.6.2.3.1

280
Modular ratio,m = = 10.98 IS 456-2000Cl.B-2.1.2
3 cbc

2.0.SECTION PROPERTIES
C/C distance between two bars = 125 mm.
Diameter of bars,Dia = 12 mm.
Clear cover, Cmin = 50 mm.
Width of the section at the centroid of the tension steel,b = 1000 mm.
Distance from the compression face to the point at which the
crack width is being calculated,a = 350 mm.
Overall depth of the section,h = 350 mm.
Area of steel provided,As = 904.779 mm2.
Permissible crack width = 0.2 mm.

3.0.LOADS
Unfactored moment = 42.7382 kN/m.

4.0.CALCULATION
Effective depth of the section,d = 294 mm.

4.1.Calculation of Neutral axis depth,x


bx2/2 = mAst(d-x)
1000*x^2/2 = 10.99*904.779*(294-x)
500x^2 + 9934.83x - 2920839.5 = 0
Depth of neutral axis,x = 67.139 mm.

4.2. Calculation of Cracked moment of inertia,I cr


Icr = bx3/3 + mAst(d-x)2
= 1000*67.14^3/3+10.98*904.779(294-67.14)^2
= 612184608.55 mm4

4.3.Calculation of tensile stress in steel,fst


mM (d  x)
fst 
I cr
= 10.98*42.74*10^6*(294-67.14)/612184608.55
= 173.905 N/mm2 < 332 N/mm2 IS 456-2000 Annex-F
Tensile stress in steel is Within Limit specified in IS456-2000 Annex-F

4.4.Calculation of Crack width

Strain at the level considered  fst . a  x = 0.00108


1
Es d  x
FILE NAME: F010R2.XLS TCE FORM NO. 010 R2
BY:BDK TATABY:BDK
CONSULTING ENGINEERS LIMITED PROJECT:SEZ PROJECT

DATE: CLIENT: COSMO FILMS LTD. DOC. NO.:

CHD.: SUBJECT: Crack Width


ax
fst OFFICE:DV
DATE: 1 
JOB NO.: TCE.6390A . DISC.:CV SH. OF REV. NO.:
Es d  x

b( h  x)( a  x )
Average steel strain  m  1  = 0.00043
3EsAs(d  x)

Distance from the point considered to the


surface of the nearest longitudinal bar,acr = 77.9181 mm

3a cr  m
Design surface crackwidth Wcr 
2(a cr  c min )
1
hx

= 0.08482 mm Safe

FILE NAME: F010R2.XLS TCE FORM NO. 010 R2


BY:BDK TATABY:BDK
CONSULTING ENGINEERS LIMITED PROJECT:SEZ PROJECT

DATE: CLIENT: COSMO FILMS LTD. DOC. NO.:

CHD.: SUBJECT: Crack Width

DATE: JOB NO.: TCE.6390A OFFICE:DV DISC.:CV SH. OF REV. NO.:

FILE NAME: F010R2.XLS TCE FORM NO. 010 R2

You might also like