Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Basic Characteristics of Intel Pentium Pro Processor

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Basic Characteristics of Intel Pentium Pro Processor

Processor Intel Pentium Pro Processor


CPU Core Frequency 150 MHz
Bus Frequency 60 MHz 60 MHz
Data bus 64-bit
Address bus 36-bit
On-chip L1 cache 8 KB data, 8 KB instruction
Off-chip L2 cache 4-way 256 KB
L2 cache timing 4-1-1-1 @ 150 MHz CPU freq.
System Chip Set 82450GX/KX
Memory timing 14-1-1-1 (4-way interleaving)
(bus cycles) 14-2-2-2 (2-way interleaving)
14-4-4-4 (no interleaving)

Basic Pipeline 14 stages


Superscalar 3-way
Execution units 5
Branch prediction 4-way 512 entry BTB,
4-bit history, 2 levels adaptive
Execution model Out of order
Speculative Execution Yes

Pentium II (Features)

The Pentium II microprocessor was largely based upon the micro architecture of its
predecessor, the Pentium Pro, but with some significant improvements.

The Pentium II[1] brand refers to Intel's sixth-generation micro architecture.

("P6") and x86-compatible microprocessors introduced on May 7, 1997.

7.5 million transistors.


The Pentium II featured an improved version of the firstP6-generation core of
the Pentium Pro.
The Pentium II was basically a more consumer-oriented version of the Pentium Pro.
It was cheaper to manufacture because of the separate, slower L2 cache memory.
The improved 16-bit performance and MMX support made it a better choice for
consumer-level operating systems, such as Windows 9x, and multimedia
applications.

Clockrate: 233, 266, 300 MHz.


The first Pentium III variant was the Deschutes

Pentium III (Features)

Pentium III brand refers to Intel's 32-bit x86 desktop and mobile
microprocessors based on the sixth-generation P6 microarchitecture introduced on
February 26, 1999.

The most notable differences were the addition of the SSE instruction set (to
accelerate floating point and parallel calculations), and the introduction of a
controversial serial number embedded in the chip during the manufacturing process.

The Pentium III was eventually superseded by the Pentium 4.

9.5 million transistors, not including the 512 Kbytes L2 cache.

usually was capable of running at 600 MHz.

The first Pentium III variant was the Katmai

Pentium IV (Features)
Pentium 4 is a line of single-core desktop, laptop and entry level server central
processing units (CPUs) introduced by Intel on November 20, 2000
They had a 7th-generation x86microarchitecture, called NetBurst, which was the
company's first all-new design since the introduction of the P6 microarchitecture of
the Pentium Pro CPUs in 1995.
NetBurst differed from P6 (Pentium III, II, etc.) by featuring a very deep instruction
pipeline to achieve very high clock speeds.
NetBurst would allow clock speeds of up to 10 GHz;
locked from 1.3 GHz to 2 GHz.
4.2 billion transistors
the initial 32-bit x86 instruction set of the Pentium 4 microprocessors was extended
by the 64-bit x86-64 set.
Pentium 4 processors have an integrated heat spreader (IHS) that prevents the die
from accidentally being damaged when mounting and un-mounting cooling
solutions.
The first Pentium IV variant was the Willamette.

You might also like