The versatile choice for material handling and agricultural
Product range equipment, textile machines, machines for the food and beverage 12 22 13 23 industry, fans and compressors Series 112
• High speed performance
Design E E-2RS1 E E-2RS1 E E-2RS1 E E-2RS1 E E-2RS1 Bore • Minimum need of maintenance Size (mm) • Accommodate misalignment 00 10 01 12
➠ ➠ ➠ 02 15 Use application requirement check list on next page 03 17 04 K 20 05 K K K K 25 Accommodates Design benefits 06 K K K K K 30 misalignment 07 K K K K K 35 The self-aligning ball bearing High speed performance 08 K K K K K 40 accommodates misalignment The SKF self-aligning ball bearing has the lowest 09 K K K K K 45 better than any other bearing. Even where wobbling occurs, start-up and operational friction of all rolling 10 K K K K K 50 bearings. In practical terms this means that the the bearing runs smoothly. 11 K K K K K 55 bearing has an unparalleled speed range. 12 K K K K K 60 13 K K K K K 65 Minimum maintenance 14 K 70 Open Sealed Only a small amount of lubricant is needed to 15 K K K K 75 design design keep the self-aligning ball bearing running effi- 16 K K K K 80 ciently. Its low friction and favourable design 17 K K K K 85 Rubbing seals ensure means extended relubrication intervals. The 18 K K K K 90 efficient sealed version is greased for life. 19 K K K 95 sealing. 20 K K K K 100 Low noise and vibration levels 22 K K K 110 Extensive comparative tests show that SKF 24 K 120 self-aligning ball bearings have the lowest 26 130 vibration and noise levels because of their = open design = sealed design K = also with tapered bore Bearing with accurate and smooth raceways. tapered bore and Product range Bearings with bore smaller than 10 mm adapter sleeve for Environmentally friendly easy mounting and Includes a wide range of E design high capacity bearings, sealed dismounting. The low friction and minimal lubricant require- Design E E-2RS1 Bore bearings and bearings with cylindrical or tapered bore. (mm) ments save resources and minimise the strain on Size the environment. The sealed version provides 135 5 Cages 126 6 additional environmental benefits. Standard cages are made of glass-fibre reinforced polyamide 6,6 127 7 (suffix TN9), pressed steel or machined brass (suffix M) depending 108 8 on bearing size and series. 129 9 Extended inner ring with special bore tolerance for applica- More information from SKF tions employing – General Catalogue, publication 4000. commercial ground – SKF Bearing Maintenance Handbook, publication 4100. shafting. – Instructions for mounting self-aligning ball bearings on adapter sleeves, publication 4337. – Commercial folder 4813.
Fluid machinery Often very high speeds. Low noise level required for Light to moderate loads. Moderate to high temperatures. Industrial fans smaller ventilation fans and for Air conditioning fans in air conditioning equip- Application requirements
Pumps ment. Compressors etc. Accommodation for misalign- ment is strongly recommended. Agriculture Low to moderate speeds. Long service life. Medium noise level. Low energy consumption. Frequent shock loads, high Low to moderate temperatures. Tractors degree of contamination (water, Lawn mowers Few and short maintenance Low noise level. sand, clay, fibres, etc.). Harvesters stops. Low lubricant consumption. Shredders No unplanned stops. No lubricant leakage from Spreaders Early warnings of bearing fail- sealed bearings. Crushers ure. etc. Sealed bearings greased for life. Easy replacements. Bearing availability assured. Textile Moderate to high speeds. Access to bearing and applica- Medium noise level. Moderate loads. Moderate temperatures. Carders tion expertise. High degree of contamination Spinning machines (textile fibres). Warping machines Weaving machines Ironing and folding machines etc.
Food & beverage High speeds. Rotating misalignment is not Medium noise level. Moderate loads. Moderate to high temperatures. Separators uncommon. Cereal mills Rice mills Baking machines Fruit juice presses etc.
Customer Vibration Operating
Speed Maintenance Misalignment Environment Temperature requirements and noise conditions Standard bearings: The very low internal friction Robust bearings with long Allow dynamic misalignment Due to the high precision and The very low friction of the self- The high load carrying capacity Open bearings can be used at – open design with cylindrical gives high speed capability. service life and long relub- up to 3° between housing and accuracy the self-aligning ball aligning ball bearings means of the E design means longer life. operating temperatures up to or tapered bore rication intervals. shaft. bearing ensures smooth and outstandingly low energy and For example a 25 % increase in 120 °C (250 °F). For bearing – bearings with polyamide, Depending on lubrication, quiet running. lubricant consumption. load carrying capacity doubles arrangements continuously machined brass or steel cooling etc. the bearings can Fast mounting and dismounting Bearings with machined brass the lifetime of a bearing. subjected to high temperatures, cages exceed the catalogue speed of bearings on adapter sleeves. cage for applications with Sealed bearings mean: it is recommended to choose – sealed bearings ratings by more than 50 %. rotating misalignment together – Clean mounting. Sealed bearings can substan- bearings with steel or brass – bearings with extended inner An economical solution for with vibrations. – No lubricant consumption. tially increase the life in contam- cages. Standard sealed bearings Bearing performance
ring many types of applications is – Prevention of grease leakage. inated environments. are suitable for temperatures up the self-aligning ball bearing The self-aligning ability enables – Less pollution. to 110 °C (230 °F). with an SKF plummer block light and flexible designs. housing. SKF standard greases for all temperature ranges. Sealed bearings, greased for life, can substantially increase the life in contaminated envir- onments. Bearings with High precision bearings for Dimensionally stabilised open Easy mounting and dismount- special features extremely low noise levels are bearings can operate up to ing with bearings with extended available on request. 350 °C (660 °F). Bearings with inner ring, flouro rubber seals can cope with temperatures up to 175 °C (350 °F).
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings
