Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 119 views

    គំរបលូ

    Uploaded by

    Chhim Rothy
    This document summarizes the design of a singly reinforced concrete beam. The beam has a width of 1000mm, depth of 120mm, and is designed for a factored bending moment of 17.94kNm and factored shear force of 50kN. The design calculates the required steel ratio, area of reinforcement, and checks the flexural and shear capacities. It is determined that 6 bars of 12mm diameter are needed and minimum stirrups of RB6@41.5mm are required to resist the shear. The concrete section is adequate without additional shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    គំរបលូ

    Uploaded by

    Chhim Rothy
    119 views4 pages
    This document summarizes the design of a singly reinforced concrete beam. The beam has a width of 1000mm, depth of 120mm, and is designed for a factored bending moment of 17.94kNm and factored shear force of 50kN. The design calculates the required steel ratio, area of reinforcement, and checks the flexural and shear capacities. It is determined that 6 bars of 12mm diameter are needed and minimum stirrups of RB6@41.5mm are required to resist the shear. The concrete section is adequate without additional shear reinforcement.

    Original Description:

    xx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a singly reinforced concrete beam. The beam has a width of 1000mm, depth of 120mm, and is designed for a factored bending moment of 17.94kNm and factored shear force of 50kN. The design calculates the required steel ratio, area of reinforcement, and checks the flexural and shear capacities. It is determined that 6 bars of 12mm diameter are needed and minimum stirrups of RB6@41.5mm are required to resist the shear. The concrete section is adequate without additional shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    119 views4 pages

    គំរបលូ

    Uploaded by

    Chhim Rothy
    This document summarizes the design of a singly reinforced concrete beam. The beam has a width of 1000mm, depth of 120mm, and is designed for a factored bending moment of 17.94kNm and factored shear force of 50kN. The design calculates the required steel ratio, area of reinforcement, and checks the flexural and shear capacities. It is determined that 6 bars of 12mm diameter are needed and minimum stirrups of RB6@41.5mm are required to resist the shear. The concrete section is adequate without additional shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    Singly Reinforcement Beam

    Input
    f`c= 30 MPa db= 12 mm
    fy= 390 MPa dst= 6 mm
    b= 1000 mm Cover= 25 mm
    h= 120 mm  0.9 for flexral
    Mu= 17.94 kNm  0.75 for shear
    Vud= 50 kN f yt  235 MPa
    n 2 #stirup lege

    d= 83.00mm
    Design
    Steel ratio factor
    Mu
    Mn   19.9333333333 kNm

    Mn
    Rn   2.894 MPa
    b d2
    f`  2 Rn 
      0.85  c 1  1    0.00790
    fy  0.85  f `c 
    Maximum percence of reinforcement
    Factor of concrete strength
    0.85 if f `c  28MPa
    f `c 28MPa 0.835714286
    1  0.85  0.05  if 28MPa  f `c  55MPa
    7 MPa
    0.65 f `c  55MPa

    Compresion strain  c  0.003

    1 f `c   c 
    max  0.85    0.0234
    f y   c  0.004 

    Minimum percence of reinforcement

    f `c 1.4
    min  max( , )  0.0036
    4 fy fy
    Steel ratio
    s  0.00790

    Steel Area
    As   sbd  655.37 mm²

    Number of reinforcement
     db 2
    As1  
    4
    Singly Reinforcement beam Chhim Rothy
     db 2 113.097336 mm²
    As1  
    4

    n 6 ដដដម
    Provide Steel area
    As  n  As1  678.584013 mm²

    Checking flexural Strength


    As f y a
    a  10.378 mm c=  12.419 mm
    0.85  f `c b 1

     a
    M n  As  f y  d    20.592 kNm
     2

    Mn  18.533 kNm

    Beam section is OK

    SSSSS SSSSSS
    Concrete shear strength

    1
    Vc  f `c bd  75.77 kN
    6

    Check require shear reinforcement

    The beam section will No shear reinforcement required if V u<ΦVc/2


    Beam section is require shear reinforcement

    Check for choose minimum shear reinforcement

    The beam section will need minimum shear reinforcement and spacing S max if Vu<ΦVc
    The beam section need minimum shear reinforcement and spacing

    Calculate steel shear strength


    Vu  Vc
    Vs   -9.10 kN

    Check for require concrete section

    Concrete section is not OK if Vs >4Vc


    Concrete section is OK

    Calculate require spacing


    Area of stirup section

    # nd 2 st
    Av  
    4
    Singly Reinforcement beam Chhim Rothy
    # nd 2 st
    Av   56.55 mm²
    4

    Av f yt d
    Sreq   -121.19 mm
    Va

    Maximum spacing

    Smax1  min(d / 4,300mm)  20.75 mm

    S max 2  min(d / 2, 600mm)  41.50 mm

    The maximum spacing is equal to Smax1 if Vs>2Vc, equal to Smax2 otherwise


    Smax  41.50 mm

    Requre spacing of stirup -121.19 mm

    Diameter and Spacing RB6@41.5

    Singly Reinforcement beam Chhim Rothy


    #stirup lege

    Singly Reinforcement beam Chhim Rothy

    You might also like