Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    SRB Design

    Uploaded by

    Ram Langhe
    1) This document summarizes the design of a simply supported single reinforced concrete beam according to IS 456-2000. 2) The beam has a clear span of 3.7m, depth of 450mm, and carries a superimposed load of 17kN/m. 3) The design checks that the factored moment of 58.76kNm and shear force of 58.76kN are within code limits. Shear reinforcement of 6mm stirrups at 130mm spacing is required. 4) Additional checks confirm the beam design satisfies requirements for development length, deflection, and reinforcement area and spacing.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    SRB Design

    Uploaded by

    Ram Langhe
    50 views3 pages
    1) This document summarizes the design of a simply supported single reinforced concrete beam according to IS 456-2000. 2) The beam has a clear span of 3.7m, depth of 450mm, and carries a superimposed load of 17kN/m. 3) The design checks that the factored moment of 58.76kNm and shear force of 58.76kN are within code limits. Shear reinforcement of 6mm stirrups at 130mm spacing is required. 4) Additional checks confirm the beam design satisfies requirements for development length, deflection, and reinforcement area and spacing.

    Original Title

    SRB design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) This document summarizes the design of a simply supported single reinforced concrete beam according to IS 456-2000. 2) The beam has a clear span of 3.7m, depth of 450mm, and carries a superimposed load of 17kN/m. 3) The design checks that the factored moment of 58.76kNm and shear force of 58.76kN are within code limits. Shear reinforcement of 6mm stirrups at 130mm spacing is required. 4) Additional checks confirm the beam design satisfies requirements for development length, deflection, and reinforcement area and spacing.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    50 views3 pages

    SRB Design

    Uploaded by

    Ram Langhe
    1) This document summarizes the design of a simply supported single reinforced concrete beam according to IS 456-2000. 2) The beam has a clear span of 3.7m, depth of 450mm, and carries a superimposed load of 17kN/m. 3) The design checks that the factored moment of 58.76kNm and shear force of 58.76kN are within code limits. Shear reinforcement of 6mm stirrups at 130mm spacing is required. 4) Additional checks confirm the beam design satisfies requirements for development length, deflection, and reinforcement area and spacing.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3

    Simply supported Singally Reinforced Beam Design as per IS 456-2000

    Enter the values in these cells only.

    1) Basic data b 230mm


    Clear span of the beam L 3.7m
    Width of support 300mm
    Grade of concrete Fck 20 N/mm2
    Grade of steel Fy 415 N/mm2
    Clear cover 30mm
    Super-imposed load w 17KN/m
    Assume Diameter of bars 12mm
    Number of bars 4No's
    Depth to width ratio d/b ratio 1.8
    dprov 414mm
    D 450mm

    2)Effective span of the beam


    c/c dist. 4m
    L+d 4.114m
    Leff. 4m

    3)Factored B.M and S.F


    Self-wt of beam 2.59KN/m
    Factored load wu 29.38KN/m
    Factored B.M Mu 58.76KNm
    Factored S.F Vu 58.76KN

    4)Design factors xumax/d 0.48


    Qlim 2.76
    dbal 304.50mm
    dprov 414.00mm OK
    pt,req 0.46%
    ptlim 0.96%
    Ast,req 434.46 mm2
    Ast,lim 909.76 mm2
    Ast,provided 452.16 mm2
    pt,prov. 0.47
    Mu,lim 108.62KNm
    OK since Mu<Mulim and hence designed as SRB
    𝛽= (0.8∗𝑓𝑐𝑘)
    5)Design of shear reinforcement
    Shear Design parameters β 4.89
    τc 0.47 N/mm2
    τv 0.62 N/mm2 NOT OK
    Assume dia. Of stirrups φ 6mm
    fy 250 N/mm2
    No. of legs of stirrups 2
    Asv 56.52 mm2
    𝑆𝑣= (0.87∗𝑓𝑦∗𝐴
    Sv 360.13mm c/c ≈ 360mm c/c
    Maximum spacing of shear reinforcement (As per cl 26.5.1.5 of IS 456-2000)
    310.50mm
    300.00mm
    133.62mm
    NOT OK since spacing exceeds the maximum value hence provide min. of all
    Sv,provided 130mm c/c
    6)Check for deflection
    As per IS 456-2000, to satisfy the deflection critieria, (L/d)actual < (L/d)permissible
    Now , (L/d)permissible 20* M.F
    Fs 231.2752057 Mpa
    M.F 1.1
    therefore (L/d)permissible 22
    and, ( L/d)actual 8.937198068
    Hence OK since (L/d)actual < (L/d)permissible

    7)Check for development length


    Ld 564mm 𝑥𝑢𝑚𝑎𝑥= (0.87∗𝑓𝑦∗
    xu 98.58mm
    M1 60.83KNm
    V 58.76KN
    L0 414mm
    1.3M1/V + L0 1759.67 mm OK
    8) Design Summary
    Width of beam, b 230mm
    Overall depth of beam 450mm
    Dia. of Bars at bottom 12mm
    No. of Bars at bottom 4Nos.
    Dia. of holding bars at top 10mm
    No. of holding bars at top 2Nos.
    Ast,provided 452.16 mm2
    Dia. Of Stirrups 6mm
    No. of legs of stirrups 2Legged
    Spacing of Stirrups 130mm
    Development length 564mm

    9)Detailing drawings 230mm


    A 2 -10φ 6φ 2 lgd strps @130 mm c/c 2 -10φ
    414mm

    450mm
    A 4 -12φ
    0.3m 3.7m 0.3m
    4 -12φ
    a) Elevation b) Section A-A

    You might also like