Professional Documents
Culture Documents
Operation Guide 5522: Things To Check Before Using The Watch About This Manual
Operation Guide 5522: Things To Check Before Using The Watch About This Manual
E-1
E-2 E-3
E-4 E-5
E-6 E-7
E-8 E-9
Operation Guide 5522
Selecting a Mode x In any mode (except a setting mode), press L to illuminate the display.
x In the Timekeeping Mode, press D to enter the Stopwatch Mode.
x For more information about using the Stopwatch Mode, see “To enter the
Stopwatch Mode” (page E-26).
E-10 E-11
x Press C to cycle between the modes as shown below. Countdown Timer Mode World Time Mode
x To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
C C
Timekeeping Mode
Each time you press the B button, the display will Stopwatch Mode Alarm Mode
change as follows. C
C C
E-12 E-13
2. Holding down L again as you press C will cause the hands to return to their Timekeeping
normal positions (normal timekeeping).
Use the Timekeeping Mode to set and view the current time and date.
Note
x Watch button functions are the same regardless of whether the hands are moved Minute Second
out of the way or at their normal positions.
Second
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no Hour B
operation is performed for about one hour.
Hour : Minute
E-16 E-17
Configuring Home City Settings 3. After the setting is the way you want, press A to return to the Timekeeping
Mode.
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST). Note
x You can check the city code and name (English) of your Home City by pressing A.
To configure Home City settings x After you specify a city code, the watch will use UTC* offsets in the World Time
1. In the Timekeeping Mode, hold down A until the Mode to calculate the current time for other time zones based on the current time
flashing SET Hold indicator disappears from the in your Home City.
display and the currently selected city code flashes on * Coordinated Universal Time, the world-wide scientific standard of timekeeping.
the display. The reference point for UTC is Greenwich, England.
x This indicates the Home City setting mode.
2. Use D (+) and B (–) to scroll through city codes until
the one you want is displayed.
x For details about city codes, see the “City Code
Table” at the back of this manual.
x Holding down either button scrolls at high speed.
City Code
E-18 E-19
Operation Guide 5522
To change the Daylight Saving Time (summer time) setting Adjusting the Digital Time and Date Settings
DST indicator
1. In the Timekeeping Mode, hold down A until the
flashing SET Hold indicator disappears from the Use the procedure below to adjust the digital time and date settings.
display and the currently selected city code flashes on
the display. To configure the digital time and date settings
1. In the Timekeeping Mode, hold down A until the
2. Press C to display the DST setting mode. flashing SET Hold indicator disappears from the
3. Press D to toggle between Daylight Saving Time (ON) display and the currently selected city code flashes
and Standard Time (OFF). on the display.
x Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press A to
return to the Timekeeping Mode.
x The DST indicator appears to indicate that Daylight
Saving Time is turned on.
E-20 E-21
2. Press C to move the flashing in the sequence shown below to select the other 3. When the timekeeping setting you want to change is flashing, perform the
settings. operation described below.
C C C Screen To do this: Do this:
Home City DST
(page E-18) (page E-20) 12/24-Hour Format Seconds Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping Press D.
C
Reset the seconds to 00 Press D.
C Hour
E-22 E-23
1/100 Second
Hours
Minutes Seconds
E-24 E-25
To enter the Stopwatch Mode 2. Now you can perform the same operations as those shown on page E-28.
You can enter the Stopwatch Mode using any one of the methods below.
Entering from Another Mode (including the Timekeeping Mode)
Entering Directly from the Timekeeping Mode Press C as many times as necessary to navigate to the Stopwatch Mode as shown
If the stopwatch was reset to all zeros the last time you used it, a new elapsed time on page E-13.
operation will start as soon as you enter the Stopwatch Mode. x To enter from the Timekeeping Mode using this method, press C four times.
See page E-28 for information about measuring an elapsed time. x This will display the stopwatch screen in the same status as it was the last time you
1. In the Timekeeping Mode, press D. exited the Stopwatch Mode. However, if you exited with a split time displayed, the
This will result in one of the following, depending on the status of the stopwatch the split time operation will be released when you return.
last time you exited the Stopwatch Mode.
x If reset (stopped at 0:00 00"00): Timing starts.
One-press timing start from the Timekeeping Mode (direct timing start from the
Timekeeping Mode)
x If an ongoing timing operation is paused: Timing remains paused.
x If an ongoing timing operation is in progress*: Timing continues to be performed.
* An ongoing stopwatch timing operation continues even if you navigate to
another mode from the Stopwatch Mode.
E-26 E-27
E-28 E-29
Operation Guide 5522
To set a target time 7. Press D to toggle the target alarm between on ( displayed) and off (
1. Reset the stopwatch to all zeros. displayed).
Hours
x The indicator TGT will be displayed in the Stopwatch Mode while the target
2. Hold down A until the flashing SET Hold indicator
time is on.
disappears from the display and the hour digit
starts to flash. Release A after the hour digit starts 8. After all the settings are the way you want, press A to exit the setting screen.
to flash.
To use the target time alarm
3. Use D (+) and B (–) to change the hour setting.
1. Reset the stopwatch to all zeros and then press D.
x Holding down either button scrolls at high speed. This will cause TGT to flash on the display.
x For a target time of 24 hours, set 00 hours
00 minutes. 2. Now you can perform the same operations as those in the steps on page E-28.
Target Time operation in 4. Press C to switch to the minutes setting.
progress Start Target time
5. Use D (+) and B (–) to change the minutes setting.
x Holding down either button scrolls at high speed.
(1) (2) (4)
6. Press C to display the target time alarm on/off (3)
setting.
E-30 E-31
x You can get an idea of time elapsed until the target time from changes in the (2) From target time half until target time is reached
display. x Screen: As shown in the figure, all of the part that
(1) From start up to half of target time indicates minutes flashes.
x Screen: As shown in the figure, top right indicator x TGT flashes at high speed starting from one minute
that indicates minutes flashes. before the target time.
x TGT starts to flash.
E-32 E-33
E-36 E-37
To perform a countdown timer operation Checking the Current Time in a Different Time Zone
D D D D B You can use the World Time Mode to view the current
City code of World Time City
Start Stop (Resume) (Stop) Reset time in one of 31 time zones (48 cities) around the
Second globe. The city that is currently selected in the World
Countdown in Progress Time Mode is called the “World Time City”.
x The hour and minute hands indicate information for
the currently selected Home City.
x When you enter the World Time Mode, the currently
selected city code and city name (English) scroll once
across the digital display. After that, the city code
remains displayed.
x You can view the name (English) of your Home City
by pressing A.
E-38 E-39
Operation Guide 5522
To enter the World Time Mode To specify standard time or daylight saving time (DST) for a city
Use C to select the World Time Mode as shown on page E-13. DST indicator 1. In the World Time Mode, press D to display the city
code (time zone) whose Standard Time/Daylight Saving
To view the time in another time zone Time setting you want to change.
In the World Time Mode, press D to change the city code setting.
2. Hold down A for about two seconds.
x Holding down D scrolls at high speed.
x This toggles the city code you selected in step 1
x To display the UTC city code (differential 0), press B and D at the same time.
between Daylight Saving Time (DST indicator
displayed) and standard time (DST indicator not
displayed).
x Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
x The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities
are not affected.
E-40 E-41
To swap your Home City and World Time City Using the Alarm
In the World Time Mode, hold down B for at least three seconds.
This will cause SWAP Hold to flash on the display, and then your Home City and Alarm ON/OFF indicator You can set five independent daily alarms. When a daily
World Time City will be swapped. alarm is turned on, an alarm tone will sound for about
Alarm time 10 seconds each day when the time in the Timekeeping
Example: To swap the Home City (TYO) and World Time City (NYC) (Hour : Minute) Mode reaches the preset alarm time. One of the alarms
is a snooze alarm that repeats every five minutes, up to
TYO (Tokyo) time NYC (New York) time seven times.
You can also turn on an Hourly Time Signal, which will
cause the watch to beep twice every hour on the hour.
B, at least To enter the Alarm Mode
3 seconds Use C to select the Alarm Mode as shown on page E-13.
x The snooze alarm screen is indicated by SNZ, while the
other alarm screens are numbered AL1 through AL4.
The Hourly Time Signal screen is indicated by SIG.
Alarm number x When you enter the Alarm Mode, the data you were
World Time City New World Time viewing when you last exited the mode appears first.
(NYC) time City (TYO)
E-42 E-43
x If you do not perform any operation for about two or three minutes in the Alarm 3. Press C to move the flashing between the hour and the minute digits.
Mode, the watch will automatically return to the Timekeeping Mode. x The selected digits are those that are flashing.
To set an alarm time 4. Use D (+) and B (–) to change the hour and minute settings.
1. In the Alarm Mode, use D to display the alarm whose x Holding down either button scrolls at high speed.
settings you want to change. x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. (P indicator).
AL1 AL2 AL3
5. Press A to exit the setting mode.
To turn an alarm and the Hourly Time Signal on and off Illumination
In the Alarm Mode, press D to select an alarm or the
Snooze alarm on indicator The display of the watch is illuminated for easy reading in the dark.
Hourly Time Signal.
Hourly time signal x When the alarm you want or the Hourly Time Signal
To turn on illumination
on indicator is displayed, press B to toggle it between on
(ON displayed) and off (OFF displayed). Press L in any mode to illuminate the display.
x The alarm on indicator (when any alarm is on), snooze x You can use the procedure below to select either 1.5 seconds or three seconds as
alarm indicator (when the snooze alarm is on), and the the illumination duration.
Hourly Time Signal on indicator (when the Hourly Time
Signal is on) are shown on the display in all modes.
x SNZ and ALM will be displayed while the snooze
alarm is turned on.
E-46 E-47
E-48 E-49
Operation Guide 5522
1. In the Timekeeping Mode, hold down A for about five Hour hand and minute hand 2. If the hour and minute hands are not at 12 o’clock,
seconds until 0:00 starts to flash. Release A after use D (+) and B (–) to adjust them until they are.
0:00 flashes. x Holding down either button moves the hands at
x This enters the hour and minute hand adjustment high speed.
mode.
3. Press A to return to the Timekeeping Mode.
Check to make sure that the time indicated by the
hands matches the time on the digital display. If the
times don’t match, perform the correction procedure
above again.
E-50 E-51
Button Operation Tone 3. Press D to toggle the setting between KEY (ON) and MUTE (OFF).
You can turn the button operation tone on or off as 4. After all the settings are the way you want, press A to exit the setting screen.
desired.
x Even if you turn off the button operation tone, the
Target Time Alarm, alarms, the Hourly Time Signal,
and other beepers all operate normally.
E-52 E-53
Time Setting
■ The current time setting is off by hours.
Your Home City setting may be wrong (page E-18). Check your Home City setting and
correct it, if necessary.
■ The current time setting is off by one hour.
You may need to change your Home City’s standard time/daylight saving time
(DST) setting. Use the procedure under “Adjusting the Digital Time and Date
Settings” (page E-21) to change the standard time/daylight saving time (DST) setting.
E-54 E-55
E-56 E-57
E-58 E-59
Operation Guide 5522
Power Supply: One lithium battery (Type: CR2016)
Approximate battery operating time: 5 years under the following conditions:
x Alarm: 10 seconds/day
x 1 illumination operation (1.5 seconds) per day
Frequent use of illumination runs down the battery.
E-60 L-1
City Code Table City City UTC Offset/ City City UTC Offset/
Code GMT Differential Code GMT Differential
City UTC Offset/ City UTC Offset/ MOW Moscow SEL Seoul
City City +3 +9
Code GMT Differential Code GMT Differential JED Jeddah TYO Tokyo
PPG Pago Pago –11 Fernando de THR Tehran +3.5 ADL Adelaide +9.5
FEN –2
HNL Honolulu –10 Noronha DXB Dubai +4 GUM Guam
ANC Anchorage –9 RAI Praia –1 +10
KBL Kabul +4.5 SYD Sydney
YVR Vancouver UTC KHI Karachi +5 NOU Noumea +11
–8
LAX Los Angeles LIS Lisbon 0 DEL Delhi +5.5 WLG Wellington +12
YEA Edmonton LON London KTM Kathmandu +5.75
DEN Denver
–7
MAD Madrid xThis table shows the city codes of this
DAC Dhaka +6
MEX Mexico City PAR Paris watch (As of July 2016).
RGN Yangon +6.5
CHI Chicago
–6
ROM Rome +1 xThe rules governing global times
BKK Bangkok +7
NYC New York –5 BER Berlin (GMT differential and UTC offset) and
SIN Singapore summer time are determined by each
YHZ Halifax –4 STO Stockholm HKG Hong Kong
+8 individual country.
YYT St. John’s –3.5 ATH Athens BJS Beijing
BUE Buenos Aires CAI Cairo +2 TPE Taipei
–3
RIO Rio De Janeiro JRS Jerusalem
L-2 L-3