Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    Bindslev elværkUS

    Uploaded by

    georgenz
    This document provides instructions for constructing a model of the Bindslev Old power plant building out of cardboard. It describes cutting out and assembling various parts of the building below and at the surface of the water, including facades, gables, port structures, stairwells, chimneys, supports, sluice gates, and a roof. Diagrams illustrate how to cut and attach the different cardboard pieces to assemble the overall model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bindslev elværkUS

    Uploaded by

    georgenz
    75 views8 pages
    This document provides instructions for constructing a model of the Bindslev Old power plant building out of cardboard. It describes cutting out and assembling various parts of the building below and at the surface of the water, including facades, gables, port structures, stairwells, chimneys, supports, sluice gates, and a roof. Diagrams illustrate how to cut and attach the different cardboard pieces to assemble the overall model.

    Original Description:

    Instructions for building the bindslev HO or N scale

    Original Title

    bindslev elværkUS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for constructing a model of the Bindslev Old power plant building out of cardboard. It describes cutting out and assembling various parts of the building below and at the surface of the water, including facades, gables, port structures, stairwells, chimneys, supports, sluice gates, and a roof. Diagrams illustrate how to cut and attach the different cardboard pieces to assemble the overall model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    75 views8 pages

    Bindslev elværkUS

    Uploaded by

    georgenz
    This document provides instructions for constructing a model of the Bindslev Old power plant building out of cardboard. It describes cutting out and assembling various parts of the building below and at the surface of the water, including facades, gables, port structures, stairwells, chimneys, supports, sluice gates, and a roof. Diagrams illustrate how to cut and attach the different cardboard pieces to assemble the overall model.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 8

    Bindslev Old power plant

    This building requires a landscape as part of it is below


    ground / water surface. All areas with dotted fill is below
    the surface.

    A B

    Cut out Band glue it on cardboard. Cut the white cells


    out.

    Glue B on A
    A B

    A B
    A B

    The ends is glued between the facades. This gable


    is glued to where the facade begins to slope. Use
    the ruler so that the gables are parallel.

    Port for water not going through turbi- The two pieces is glued on cardboard. The ceiling
    nes.
    is glued on to the
    end and then to-
    ward the dark
    squares on the
    gable.

    ”Ceiling” The end


    Gable of garage doors.
    The dark squares is glued
    onback so it fits with the
    A B gates of surplus water.

    Stairwell for turbines. Chimneys. Glued to the two tip ends.


    Concrete Supports. They is glued on cardboard and folded. Then they
    are glued on the house.

    Stairway folded in
    copy paper. A is cut
    out and are glued on
    cardboard. Scratch
    along the red line and
    bent.
    The folded stair are
    glued to A from the
    red line and up.
    The whole glue into
    the stairwell.

    A
    Sluice gates is cut out and are glued on cardboard. Scratched between the
    dotted piece and tiles For every two doors is a hoisting mechanism. Here is glued a piece of
    Schratch plastic coated metal wire on. The wheels may eg be sequins.

    Cut all the way up to


    the tiles.

    The gates folded down over the tiles and


    pillars up. The posts can be made stronger
    with eg matchstick pieces. They can be
    painted or covered with paper.

    Finally all are glued on the


    house.

    On the flip side, I glued a strip of card-


    board for to keep the gates and bars.
    The roof

    You might also like