Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 426 views

    Method Statement

    Uploaded by

    nayum
    1. The document outlines the work method statement for Henmak Technical Services to complete the fabrication and installation of a gas lift system for Beam Energy. 2. The general work sequence includes carrying out surveys, procuring materials, mobilizing to site, isolating supply lines, constructing cable trays, installing cables and accessories, testing loops, calibrating devices, and pre-commissioning and commissioning the system. 3. Safety precautions like using approved scaffolding and safety harnesses for high works and properly terminating earth cables are emphasized.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Method Statement

    Uploaded by

    nayum
    426 views5 pages
    1. The document outlines the work method statement for Henmak Technical Services to complete the fabrication and installation of a gas lift system for Beam Energy. 2. The general work sequence includes carrying out surveys, procuring materials, mobilizing to site, isolating supply lines, constructing cable trays, installing cables and accessories, testing loops, calibrating devices, and pre-commissioning and commissioning the system. 3. Safety precautions like using approved scaffolding and safety harnesses for high works and properly terminating earth cables are emphasized.

    Original Description:

    Method Statement

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document outlines the work method statement for Henmak Technical Services to complete the fabrication and installation of a gas lift system for Beam Energy. 2. The general work sequence includes carrying out surveys, procuring materials, mobilizing to site, isolating supply lines, constructing cable trays, installing cables and accessories, testing loops, calibrating devices, and pre-commissioning and commissioning the system. 3. Safety precautions like using approved scaffolding and safety harnesses for high works and properly terminating earth cables are emphasized.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    426 views5 pages

    Method Statement

    Uploaded by

    nayum
    1. The document outlines the work method statement for Henmak Technical Services to complete the fabrication and installation of a gas lift system for Beam Energy. 2. The general work sequence includes carrying out surveys, procuring materials, mobilizing to site, isolating supply lines, constructing cable trays, installing cables and accessories, testing loops, calibrating devices, and pre-commissioning and commissioning the system. 3. Safety precautions like using approved scaffolding and safety harnesses for high works and properly terminating earth cables are emphasized.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 5
    At a glance
    Powered by AI
    The document outlines the general requirements and safety procedures for a project involving fabrication and installation of a gas lift system.

    Personal protective equipment must be worn at all times. Scaffolding will be used for high works and safety harnesses are mandatory. Cables and equipment will be tested and properly earthed before energizing.

    The general work sequence involves measurement, procurement, shipment, mobilization, isolation, construction, installation, testing and commissioning.

    WORK

    METHOD
    STATEMENT

    HEN/BEL/WMS/01
    HENMAK TECHNICAL SERVICES LIMITED
    WORK METHOD STATEMENT FOR FABRICATION &
    INSTALLATION OF GAS LIFT SYSTEM
    CONTRACT NO:

    ACTION BY NAME TITLE SIGNATURE DATE

    PREPARED ANTHONY PROJECT


    BY EKEKE ENG.

    AUTHRIZED HENRRY MANAGING


    BY HALUEDE DIRECTOR

    AGREED BY

    APROVED CONTRACT
    BY OWNER
    BEAM ENERGY LIMITED
    INTRODUCTION
    This document provides a description of the things expected of HENMAK
    TECHNICAL SERVICES LIMITED as related to this project and outline the
    general requirement for the project .This document also presents precautions and
    methods to be followed in other to achieve expected success.

    GENERAL WORK SEQUENCE


    The general work sequence shall include but not limited to the following.

    1. Carry out measurement and detail work survey.


    2. Procurement of Electrical materials, Instrument field devices, Control and
    Shutdown valves.
    3. Shipment of deliverable of materials to site
    4. Mobilization to site and HSE site workshop
    5. HSE induction, raising of PTW and all complementary documents
    6. Isolation of supply line to closest drains, decommissioning of old cable
    traydecouple and coupling of fittings and installations of new tray.
    7. Construction of cable tray base plate, earth cable route survey and
    installation.
    8. Earth cable laying, reinstallation of cables on the installed new trays.
    9. Termination of cables, joint boxes, risers, fittings and all accessories.
    10. Installation of control panels and accessories.
    11. Loop‐Testing
    12. Calibration of field devices
    13. Hook‐up of Field devices
    14. System integration
    15. Pre‐commissioning and Commissioning
    A visual inspection will be carried out to understand the cable route before work
    commence.
    Disconnect and dismantle the old obsolete and disused cables.
    All cables removed during construction to be reinstalled and test to confirm properly in other.
    All reconnected lamps should be properly tested with meter tester.
    Test all installation and commission
    Confirm that the circuit is dead using multimeter to check.

    HEIGHT WORKS.
    All height works shall be by means of approved equipment such as scaffolding using safety
    harness as specified in the contract document.

    HENMAK shall ensure that the scaffolding operational mechanisms are in good working
    condition.

    EARTH CABLE CONNECTIONS.


    HENMAK shall ensure that all parts of the working areas equipment outages are obtained and
    that BEAM authorized person shall authorize the switching operations.

    Connection to earth at all point of disconnection includes line voltage to check for leakage where
    necessary to prevent shock and DANGER notices attached.

    Clarify the extent of work and obtain relevant certificates for test.

    Test all cables for continuity before installation is carried out.

    Test all equipment before installation.

    Report all defects if any to the supervisor for immediate action and replacement.

    All personal protective equipment (PPE) must be worn at all times during operations.

    All earth leads must be properly terminated.


    SETTING UP OF SCAFFOLDING
    HENMAK TECHNICAL SERVICES LIMITED shall ensure that all height work above
    1.8meters shall be by use of pre-mobbed and certified functional scaffolding system.

    Ensure that the setting of scaffolding is manned by the experienced personnel, stands at level and
    stopper is firm on the ground and that the safety harness is in good working conditions.

    Use of safety harness is mandatory (safety belt).

    TESTING AND COMMISSIONING


    All cables, Earth electrodes and installed equipment must be confirmed okay.

    You might also like