Aw 1170 SM
Aw 1170 SM
Aw 1170 SM
CONTROL PANEL
RECOMMENDED DETERGENT
AMOUNT ....................................... 5
BEFORE CALLING
EMERGENCY ............................. 19
SPECIFICATIONS ....................... 19
Never attempt to touch laundry in the spin basket until the motion of the
basket stops completely.
Laundry in the basket may become wrapped around the hand, even when the basket is only
moving slowly.
Use particular caution when children are present.
Never allow children to look into the basket or play around the washing
machine.
Do not place the stand or box near the washing machine.
Children may fall into the tub and get injured or drowned.
Use proper power source indicated in the rating label of the machine.
It can cause fire or electrical shock.
Failure to use a proper power source may result in the electrical outlet becoming excessively hot, leading to fire.
Unplug the power cord from the electrical outlet before attempting to service the washing machine.
Do not handle the power cord with wet hands.
It can cause electrical shock or malfunctions that lead to injuries.
Do not allow water to come into direct contact with the various parts of the outer body.
Doing so may result in electrical shock.
Wipe away any buildup of dust or grime on the prongs of the power plug.
Buildup of dust or grime may cause fire.
Pull out the power plug if you do not plan to use the machine for a long time.
Failure to do so may result in electrical shock or shorts due to deterioration of the insulation.
Do not place the hands or other objects under the washing machine while in operation.
Moving parts may cause injury.
Before use, make sure the faucet in open, and the connection with water supply hose is not loose or
leakage water.
Looseness of screws, hose connections, or other areas may cause water leakage or other damage.
The opening must not be obstructed by carpeting when the washing machine is installed on a carpet floor.
DESCRIPTION OF PARTS
Detergent and Safety Precaution Label Powder Detergent
Bleach Dispenser (Present/Preset)/
Softener Case
Lid
Water Supply
Port
Opening and closing of the detergent
and bleach dispenser:
Wash Basket
1 Hold the groove of (Wash Basket/Spin Tub)
the entry gate with
fingers, and pull the Hose Hanger
cover out while Power Cord
pressing the hook.
Caution:
If the supply cord is damaged, it
2 After putting in must be replaced by the
detergent, close manufacturer or its service agent
the cover until click or a similarly qualified person
in order to avoid a hazard.
is heard.
Pulsator
(Hybrid Screw Type)
Horizontal
Level Indicator
Plug
Cassette filter
Drainage Hose
Accessories
Adjustable Leg
Control Panel (Front: 1 piece)
79L
21L
Amount
Detergents
/spoon
Detergent Softener
, the washer Level Setting
guided deter-
Display 1.4 spoon of the AW- AW- Normal Concentrated
Powder Liquid
detergent cup 1170SM 9770SM Type Type
supply using the measure spoon
he compact detergent is displayed. 1.4 79L 77L Approx. 52g Approx.52mL Approx.52mL Approx.17mL
One spoonful of detergent 1.3 Approx. 48g Approx.48mL Approx.48mL Approx.16mL
denotes about 55L of water
consumption
1.2 67L 66L Approx. 44g Approx.44mL Approx.44mL Approx.15mL
the kind of detergents, amount of
ption by one spoonful changes. 1.1 Approx. 41g Approx.41mL Approx.41mL Approx.14mL
tergent volume according to the
rgent in use. 1.0 Approx. 37g Approx.37mL Approx.37mL Approx.12mL
of operation MIN.
0.9 Approx. 33g Approx.33mL Approx.33mL Approx.11mL
d, the estimated
he end of wash-
0.8 47L 46L Approx. 30g Approx.30mL Approx.30mL Approx. 10mL
ayed.
0.7 Approx. 26g Approx.26mL Approx.26mL Approx. 9mL
of the time to
hing
0.6 Approx. 22g Approx.22mL Approx.22mL Approx. 7mL
s are displayed.
CONDENSED BUBBLE
The washer starts flowing water at the low level to absorb the concen
trated detergent into the laundry in order to remove the dirt efficiently.
5 4 6 1
"REGULAR" cycle
Water lavel, water current and time are auto- 2 Turn the POWER on.
matically selected according to the quantity and • The "REGULAR" lamp will light up.
type of laundry detected automatically.
Put the laundry evenly and confirmly.
If it is not, the lower water level water may be set. 3 Put the laundry in the basket.
• In case of selecting "SUPER SPIN DRY" cycle, please see page 8 for
"HEAVY WASH" cycle details.
It is especially for heavy soiled clothes.
It washes with stronger water current
4 Press the button to select "REGULAR" "HEAVY WASH" "HEAVY
RINSE" "SOAK".
"HEAVY RINSE" cycle
By washing in combination with the
"REGULAR" course, the number of times for
rinsing increases by one turn. When "HEAVY 5 Press button.
RINSE: maximum" is chosen, this mode is
memorized. "HEAVY RINSE" illuminates by • The pulsator automatically detects the laundry amount, and indicates
turning on the switch from next time. the amount of concentrated detergent suitable for the laundry amount.
5 2 1
Type and amount which may be washed.
Double size 3 Pour the liquid detergent in the wash
(180 cm x 230 cm or less) basket.
100% synthetic fiber
Type: Mayer, Tuft, Down cloth
Weight: 5.0 kg or less (AW-1170SM)
4.2 kg or less (AW-9770SM) 4 Put a large item placed in the blanket
• All wool blankets and regular electric blankets should NEVER be washing net in the washing basket.
washed.
Washable electric blankets should be washed according to the washing
instruction given in the user’s manual that accompany them when
purchased.
• If the blanket will not go into washing net because of fiber length of 5 Close the lid and press the
thickness, it can not be washed.
button.
Folding blankets
• Remove waste or thread from blanket.
• Fold the blanket in six lengthwise.
Fold it once again the same way.
Take the blanket out after washing
Insert a blanket to the net
• Roll up the blanket. completed.
• Roll the blanket up loosely except • Open the blanket net fastener and put at the
Mayer type blanket. center of the blanket. Then take out the blanket
• Place the blanket into the blanket net from net.
hem-side first, and close the fastener.
Washing period may become longer with drainage
condition.
PRESET MODE
How to use preset mode
1 Turn the POWER on.
Put the laundry in the basket and select your favorite cycle or water level.
Set the custom wash cycle.
2 Press the PRESET button to preset the time.
• The displayed time can be changed from 2 to 12 hours by increasing
1 hour per press.
After the operation: the buzzer will beep when the washer
completes the operation.
• Turn off the faucet and clean the lint collector.
Shower rinsing
TWICE Static rinsing
(2 times) 1 Open the lid and put the laundry in the basket.
Shower rinsing Overflow
And select the desired cycle.
TWICE, OVERFLOW
(2 times) rinsing
Shower rinsing
3 TIMES
(2 times)
Static rinsing Static rinsing 2 Set the custom wash cycle ( ).
This model is equipped with CHILD PROOF mode. After this mode is set to ON, the washer will alarm if the lid is opened during
the operation. If you find the accident such as children’s falling into the wash tub, please take necessary safety action
urgently.
If there are small children who require attention, set this mode ON.
WARNING: Pay attention to small children. Do not leave the lid open. Do not leave the washer filled with water. Never allow
children to look into the basket or play around the washer. Do not place the stand or box etc. near the washer.
The childproof lock (child safety Setting the CHILD PROOF mode
equipment) considers the case in which Press the button, then the washing machine begins
a child falls into the wash basket by
operating, follow the instruction below:
accident. This CHILD PROOF function
gives an alarming noise about the trouble, Hold down the button, press the button once again.
ceases operation and drains water.
A buzzer will sound and the
When the buzzer makes a noise, open the CHILD PROOF mode indicator ON
lid and check the condition inside. will be activated.
The operation of the CHILD PROOF mode Once the CHILD PROOF mode is set, it is stored in memory.
• If the lid is open during the operation in the CHILD
PROOF mode, the buzzer will sound and operation Canceling the CHILD PROOF mode
will stop. Subsequently if that state persists about 5
seconds, it will be detected as an alarm and the
Hold down the button, press the button.
water will be drained. The buzzer will continue
sounding, unless the lid is close within 5 seconds,
or after alarm detection, unless power is turned off A buzzer will sound and the
or the CHILD PROOF mode is canceled. CHILD PROOF mode indicator OFF
• If the machine is started with the lid open, the will be canceled.
water will be supplied for a while. When water
reaches a certain level; however, the buzzer will Once the CHILD PROOF mode can be canceled even during the
sound and then after about 5 seconds, the CHILD operation.
PROOF mode will work.
Adding Laundry of Detergent during the
CHILD PROOF mode
Open the lid and then after adding laundry or detergent quickly
with the buzzer sound, close the lid.
If the lid remains open, draining will start after about 5 seconds.
• The washing machine will not operate if the lid is close after the
elapse of 5 seconds. In such case, cancel the CHILD PROOF mode
or turn the POWER off. Then set the CHILD PROOF mode once
again.
10
8 min *5 min
21L~79L (21L~77L) Shower rinsing (2 times)
SOAK and soak 1 hour,
Static rinsing (1 time)
6 min maximum 98~237min
stepless auto setting 2,3hours 5 min minimum
No indicator,
Supply water
and stir Soak for 20 min. Wash 3 min. Drain and
spin 3 min.
11 min.
TUB CLEANING depending on water
level exceeding Supply water
79L (77L) and stir
11 min.
Rinse 3 min. Drain and
spin 3 min.
• The time requirement listed above include water supply rate of 15L/min and a drainage time. The actual time required varies
according to the quantity of the laundry, the degree of its offset, water pressure and/or drainage status.
• The contents in ( ) also apply to AW-9770S.
OPTION MODE
The contents in ( ) also apply to AW-9770SM.
* Set it once, it is written in memory. You don’t have to set it on each laundry.
11
6248087201_EN(11-19) 11 8/1/08, 11:14 AM
LAUNDRY GUIDE
When using liquid detergent and bleach
Carefully read the directions given in the manual for In case of reserving washing, pour the bleach into the
the liquid detergent and bleaching agent and use them powder detergent part of the "powder detergent/finishing
correctly. agent insertion case".
Liquid detergent / bleaching
Liquid detergents and agent insertion slot Chlorine-based bleaching agent
liquid bleaches • To use a chlorine-based bleaching agent, dilute it with
Load the liquid detergent and water three times as much. Load the bleaching agent into
the bleaching agent directly into the wash basket by dissolving the bleach gradually using
the wash basket dissolving both the running water for washing.
little by little using the running • Avoid putting the bleach directly and also applying it
water for washing. For directly to the laundry. These actions cause discoloration
timer-reserved washing, insert and/or cloth damage.
both into the dispenser.
NOTICE:
Powder bleaching agent • Be careful not to spill the bleach onto the operating panel.
• Load the bleaching agent directly into the wash basket If you inadvertently spill the bleach, wipe it away at once.
dissolving the bleach little by little using the running water
to be for washing.
12
6248087201_EN(11-19)
Filter cover
L How to remove L How to set in
Turn over the filter, and then slide the filter case in the arrow 1 Set the filter case to the filter cover as follows.
direction of the following figure (1) to remove it (2). 2 Press down the filter cover case until a “click” sound
Clean inside the filter cover and the filter case. is heard.
Filter case
Filter cover
Filter case Filter cover
L When the filter valve inside the filter cover is
loosened
If the filter valve is loosened, lint may not be collected.
1 Set the filter valve to the filter case while aligning its
When it is difficult to remove the filter case due to lint concavity and convexity to those of the filter case.
attached, wet it with water to soften the lint.
Filter valve
Filter case
Filter cover
Concavity Convexity
2 Insert the groove of the filter valve to the click at the
center of the filter cover.
Groove
Click
DETERGENT/BREACH DISPENSER
Wipe or Wash out any remaining detergent.
If there is any remaining detergent hard to be removed, use the “TUB CLEANING” course.
• Before put detergent or breach to in the detergent/breach dispenser, remove water in its inlet.
With any remaining water, detergent may be hardened and attached.
Detergent/Softener case
Remove the case to clean it. In addition, wipe away any dirt from the water supply port.
Removing the case Remounting procedure
1 Removal procedure; 1 Mount the cap of the insertion case
Pull the detergent /softener case toward you, then lift it for removal.
2 Lift the case obliquely in the same way as you remove
it, and insert it deeply along the guides.
Guides
Cap
2 Remove the cap of the detergent/softener case.
Make sure to put back the cap after removing the
cap. If the washing machine operates without the
cap in place, the softener does not enter.
13
6248088101(EN)(21-30)
Water intake/Stir ( 1) about 11 min 2 Press the button and select TUB CLEANING.
Drain/Spin ( 2) about 3 min 4 When the pulsator (spinning board) starts to spin, add
the chlorine-type whitening detergent about 300 ml. to
the basket.
Water intake/Stir ( 1) about 11 min
• Add it at the first used water.
• Do not put any clothes in the basket during the
Rinse about 3 min "Tub Cleaning" program.
14
8/1/08, 11:14 AM
Tighten nuts of
adjustable legs 4 Hold down the diagonal line of the washing
and lock them. machine and make sure that no ratting occurs.
• Despite the fact that the bubble is inside the circle, the ratting
exists. Then shaking motion
2 Check the position of the air bubble in the floor level becomes larger or some
indicator. abnormal noise comes out.
• If the bubble is not positioned inside the circle, adjust the height Make sure to readjust in case
by rotating the leg caps. the washing machine rattles.
Note: Check the floor level
indicator directly from above.
Standard point ■ About the leg caps
The machine comes with four leg caps: two for adjustment in
steps of 3 mm and two for adjustment in steps of 6 mm. Use
Bubble them in combination as required. If they are to be stacked, posi-
tion the thicker caps under thinner ones.
15
Drainage
hose
1 Lay down the machine on a flat object such as a corrugated Hose Stopper
cardboard so that the front panel will face down.
3 With the hose putting at the left side of the machine, insert Hose Hook
the stopper into the attachment hole on the base of the Stopper Hook
machine and pull it toward you (Make sure that the hook is
hinged to the stopper).
Attachment
4 Insert the hose into the hose hook at the left hand side of Hole
the machine.
16
17
making noise • Is there the inclination of the laundry? Please correct the inclination or non stability
• Is your washing machine installed on an of laundry in the washing machine.
inclined or uneven surface?
water leak • Is the faucet shape suited? Adjust the inside ring of the hose union or
change faucet shape (Refer to p. 17)
• Are the hose coupling and the nozzle loose? Re-attaching the water (Refer to p. 17)
• Is the water inlet nut loose? Re-attaching the water supply hose (Refer to
• Is the water supply hose connector clogged? p. 17)
does not beep the • If you turn the power on and press START Reset the end buzzer sound to turn on refer-
end buzzer pad immediately, it may not beep the end ring to "If you wish to turn off the end buzzer
buzzer. sound. (p. 12)"
• Is the end buzzer turned off?
be displayed.
If the problem is not solved despite checking, unplug the power plug and request repair.
18
When: Check:
The first time you use your washing machine, • This is merely water lift over from the performance inspection performed
a small amount of water may drain out of the on your washing machine before it was shipped from the factory.
drainage hose.
During operation the control panel gets warm. • Because of the electronic parts radiate heat.
The pulsator rotates bit by bit. • Because of preventing the laundry unbalancing, it rotates bit by bit.
During washing and rinsing, lamps flickers. • It is the cause of the power source wiring in a house. If fluorescence light
be changed, it may improve condition.
During spinning, suddenly supplying the • Because load unbalance occurred and safety switch operated. The spin
water or rinsing. will cycle resume after supplying water, rotating and correcting the
unbalanced load.
Sloshing sounds of remaining water coming • They are made by water retained by the machine for the purpose of
from your washing machine after SPIN cycle maintaining balance and do not indicate malfunction.
has been completed.
After pausing the machine during the spin • There are a short pause before the machine begins to spin as the
cycle, it will not starts immediately. drainage valve opens sufficienty.
If operates the machine at spinning on and • You may hear intermittent motor sound ("coon" sound) in spinning
off. process occurs, this is a sound which occurs in order to control rotation,
and not a malfunction.
After water supply shut off or water with iron • Wait for water becomes clean. Returning type bleach can be used
rust appears. (hydrohiter etc.) when iron rust adhered to the white colored clothes. Avoid
using the bleach for colored articles.
The buzzer does not stop. • If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps. Check inside the washing
machine. Press POWER to turn it off.
SPECIFICATIONS
Model AW-1170SM AW-9770SM Model AW-1170SM AW-9770SM
Type Fully automatic washer Rated period of operation Regular cycle 55 min.
Washing Standard amount of water 79L high water level 77L high water level
Vortex type
system
Overall Standard water consumption 180L 177L
645 (Width) x 593 (Depth) x 1007 (Height)
dimension Weight 40kg
Rated 10kg 9kg
capacity Dry clothes weight Dry clothes weight Water tap pressure 0.03~1MPa
19