CW50MM

Curtain Wall 60mm
11-2014-V.03
All rights reserved.
No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
Curtain Wall 60mm
60 - A GULF EXTRUSIONS 03
60 - B QUALITY AND CERTIFICATIONS 04 - 09
60 - C INTRODUCTION TO THE SYSTEM 10
60 - D PROFILES 11 - 35
60 - E PROFILE LIST 37 - 48
60 - F ACCESSORIES 49 - 51
60 - G ASSEMBLY DRAWINGS 53 - 85
60 - H 3D SECTIONS 87 - 91
GULF EXTRUSIONS 60-A
GULF
EXTRUSIONS
Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded
in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most
innovative and reliable companies in the Middle East.
Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s
largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants
in the region.
Gulf Extrusions quality products can be seen in many of today’s progressive structures. The
company was formed with the sole purpose to meet the increasing demands for aluminium
extrusions in domestic, regional and international markets.
Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per
annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized
finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries
ranging from architectural to transportation, engineering to structural sections, components for
household items, HVAC and customized products.
During the progressive stages of Gulf Extrusions, from its inception to expansion, the company
not only has acquired a majority share in the local market, it has also made its presence felt
globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa,
Europe and Canada.
Our commitment and utmost priority is to provide customers with the finest quality of
aluminium extrusions.
Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.
3
60-B QUALITY STANDARD & CERTIFICATIONS
Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is
dedicated to respond and deliver on time, high quality, tailor-made and cost effective products.
The management and staff are committed to implement a comprehensive and integrated Quality
Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.
INTERNATIONAL STANDARD COMPLIANCE
Extrusions Dimensions Tolerances: Powder Coated Finish: Anodizing Finish:
• BS EN 755 - 9:2008 • BS:6496 Clause: 10.4, 10.5, • BS EN 12373-1 2001 Clause 7

• BS EN 12020 - 2:2008 10.6, 10.7 & 10.8 (BS:6161 Part 6)
• DIN 1748, DIN 17615 • ISO 2360 / 2813 / 2409 / 2931 • BS:3987 Clause 2, 3, 5, 6
• ASTM B221 • Minimum Film • Appendix- A, B, C, D, E,
Thickness – 60 Microns F, G, H, J, K, L Minimum Film
Thickness- 16 Microns
PRODUCT QUALITY CERTIFICATES
Qualicoat (European Powder Coaters Association):

• A quality label for coating on metal for Architectural Applications
• A product license under the control of EWAA (European Wrought Aluminium Association)
in Zurich Switzerland
Qualanod (European Anodizers Association):

• A quality label organization to guarantee high quality Aluminium Anodizing.
• A product license under the control of EWAA (European Wrought Aluminum Association)
in Zurich Switzerland
• SASO
• ESMA
Management:
• ISO 9001 (Quality Management System)
• ISO/TS 16949:2009 (Management System)
Environment:
• ISO 14001 (Environment Management System)
Membership in International Organization:

• AAC member (Aluminium Anodizers Council - USA)
• AEC member (Aluminum Extruders Council - USA)
• DIN EN 15088
4
QUALITY STANDARD & CERTIFICATIONS 60-B
CHEMICAL COMPOSTIONS
ALLOY 6005A ALLOY 6060
Element Minimum Maximum Element Minimum Maximum
Si 0.50 0.90 Si 0.30 0.60
Fe - 0.35 Fe 0.10 0.30
Cu - 0.30 Cu - 0.10
Mn - 0.50 Mn - 0.10
Mg 0.40 0.70 Mg 0.35 0.60
Cr - 0.30 Cr - 0.05
Zn - 0.20 Zn - 0.15
Ti - 0.10 Ti - 0.10
Other Each - 0.05 Other Each - 0.05
Other Total - 0.15 Other Total - 0.15
Aluminium Remainder Aluminium Remainder
ALLOY 6063 ALLOY 6082
Element Minimum Maximum Element Minimum Maximum
Si 0.20 0.60 Si 0.70 1.30
Fe - 0.35 Fe - 0.50
Cu - 0.10 Cu - 0.10
Mn - 0.10 Mn 0.40 1.00
Mg 0.45 0.90 Mg 0.60 1.20
Cr - 0.10 Cr 0.04 0.15
Zn - 0.10 Zn - 0.20
Ti - 0.10 Ti - 0.10
Other Each - 0.05 Other Each - 0.05
Other Total - 0.15 Other Total - 0.15
Aluminium Remainder Aluminium Remainder
ALLOY 6061
Element Minimum Maximum
Si 0.40 0.80
Fe - 0.70
Cu 0.15 0.40
Mn - 0.15
Mg 0.8 1.20
Cr 0.04 0.35
Zn - 0.25
Ti - 0.15
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
5
ANODIZING
A wide range of anodizing treatment options are possible for the aluminium profile sections of this
system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro
colors (Red, Blue, Green, and Gray).
This surface treatment process involves first pre-treatment with scotch brite brushing for the
unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic
electrolyte solution through which electric current is passed creating an anodic film on the profiles
ranging from 5-30MICs.
The process is guaranteed and certified for use by QUALANOD - A quality label Organization to
guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.
6
Authorization to use the quality sign
7
POWDER COATING
• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT
Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8
ISO 2360/2813/2409/2931
Minimum Film Thickness - 60 Microns
A wide choice of colors for powder coating can be used for the aluminium profile sections.
From Gulf Extrusions the following powder types are available
• Polyester Façade (PE-F)

• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent
to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)
• Anti Bacterial (recommended to be used in Hospitals)
• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant
in nature.
This surface treatment process involves the following pre-treatment
1. Degreasing
2. Washing
3. Etching
4. Washing
5. Chromatising
6. Double washing in dematerialized water
Once completed, powder is applied using an electrostatic spraying process with charged powder
particles, followed by curing in an oven under a controlled temperature of 180-200C for paint
polymerization where the paint layer is at least 60mic.
This whole process is certified for use from QUALICOAT - A quality label for coating on metal for
Architectural Applications.
GUARANTEE PERIOD:
10 years for PE-F Quality
25 years for PE-SDF
8
Authorization to use the quality sign
9
60-C INTRODUCTION TO THE SYSTEM
INTRODUCTION TO THE SYSTEM

CW 60 is a unique curtain wall structure that combines multi-structural grid to create various aspects,
starting by the conventional curtain wall system passing through the two way horizontal capping
curtain wall systems to the four way structural curtain wall systems.
CW 60 has proven to be a curtain wall solution perfectly tailored to the Middle East market
requirement.
FEATURES:
The CW 60 system consists of 60mm width structure components allowing several external
appearances. It is fast to manufacture and to install. With the wide range of profile selection, the
system can provide the possibility of large glass panels, maintaining the stiffness and rigidity of the
curtain wall structure. Mullions can be reinforced by Aluminium or Steel tubes to enhance the free
span area, making it possible to be used in high structures
Special casements for the CW 60 system have been developed giving two options of cold and
thermally insulated profiles. Casements are Italian openings with selected stay arms to ensure the
tightness and stability of the opening.
CW 60 uses the same structures for multifunctional applications:

• Conventional application is obtained by applying horizontal and vertical caps, clipped to
horizontal and vertical pressure plates screwed to the structure holding the glass panels. Two
EPDM gaskets, one to the inside fixed on the structure, the second to the outside fixed on the
pressure plate; provide the grip on the glass panels. Glass thickness ranges between 6mm –32 mm
• Two way or horizontal capping application is obtained by applying horizontal caps only, clipped
to a horizontal pressure plate screwed to the structure and holding the glass panels. Two EPDM
gaskets applied horizontally one to the inside fixed to the structure; the second to the outside
fixed to the pressure plate provide the grip on the glass panels. Vertically only a vertical sealant is
applied between the glass panels for aesthetic and water tightness
Glass thickness ranges between 6mm – 32mm
• Four way structural aspects is a curtain wall aspect which conceals that conceals the aluminium
structure from the outside making it completely invisible. Concealed openings are designed in
order to keep the external appearance of the structure uniform even in the presence of the
opening. The four way structural applications is obtained by fixing a glass toggle to the glass
holding the panel by a specially designed aluminium spacer, well sealed by a structural sealant to
ensure the rigidity of panel. The space between glass panels is sealed by a neutral sealant for
aesthetic and water tightness purposes; this application is the most common application in the
MENA region. Glass thickness is of 32 mm if panel is composed of Xmm inside- 20 mm
airspace-8 mm outside the glass thickness can vary if we change the outer glass thickness
uniformly on the façade.
10
PROFILES 60-D
PROFILES
11
60-D PROFILES
Mullion / Transom Profiles
All dimensions in mm
Visible area_ _ _ _ _
12
PROFILES 60-D
_ _ _ _ _Visible area
13
60-D PROFILES
14
PROFILES 60-D
15
60-D PROFILES
16
PROFILES 60-D
17
60-D PROFILES
18
PROFILES 60-D
10706
19
60-D PROFILES
09439
20
PROFILES 60-D
21
60-D PROFILES
22
PROFILES 60-D
23
60-D PROFILES
Frame / Sash Profiles
24
PROFILES 60-D
16741
16742
16742
25
60-D PROFILES
CURTAIN WALL
CURTAIN WALL
FRAME PROFILE
SASH PROFILE
16741
GLAZING CLIP
26
PROFILES 60-D
27
60-D PROFILES
28
PROFILES 60-D
Complementary Profiles
29
60-D PROFILES
30
PROFILES 60-D
31
60-D PROFILES
32
PROFILES 60-D
33
60-D PROFILES
34
PROFILES 60-D
35
PROFILE LIST 60-E
PROFILE LIST
37
60-E PROFILE LIST
Profile Child Weight IX IY WX WY

Reference Profile Profile Section Page KG/M cm4 cm4 cm3 cm3
13278 -- 19 4.248 91.619 648.512 30.540 63.908
13474 -- 18 2.349 46.660 199.991 15.553 27.398
13322 -- 18 3.262 65.297 273.536 21.766 34.458
13952 -- 21 2.353 43.642 172.951 14.547 25.110
13495 -- 14 2.296 43.759 177.094 14.588 25.189
13214 -- 14 3.834 67.560 309.237 22.520 43.481
14600 -- 15 2.432 47.613 183.233 15.871 25.719
38
PROFILE LIST 60-E

13951 -- 15 2.836 50.464 202.462 16.821 26.628
16741 -- 17 2.476 52.974 163.512 17.656 25.487
16742 -- 17 2.041 43.612 137.988 14.535 21.954
13469 -- 22 2.418 52.583 229.258 17.528 29.751
13537 -- 22 1.743 31.597 53.177 10.532 12.307
12907 -- 20 2.249 56.755 34.809 11.674 11.603
13525 -- 21 1.956 25.274 44.942 8.374 10.478
39
60-E PROFILE LIST

12227 -- 16 4.518 74.094 384.837 24.698 46.841
12226 -- 16 3.710 46.326 111.247 15.442 22.242
13539 -- 19 2.467 51.426 236.909 16.129 30.332
13538 -- 23 2.507 54.673 250.608 17.725 31.283
13869 -- 13 3.196 66.738 214.924 22.246 27.715
13250 -- 13 2.370 46.658 175.088 15.553 23.999
13152 -- 20 2.120 28.866 54.271 8.028 11.081
40
PROFILE LIST 60-E

05071 -- 23 6.933 146.506 725.058 48.835 96.674
11135 -- 23 1.445 2.850 8.855 1.508 2.286
13212 -- 24 1.323 11.099 31.249 4.390 6.416
13213 -- 24 1.226 8.808 21.986 3.238 6.230
13640 -- 25 1.241 8.933 24.499 3.643 5.023
13913 -- 24 1.242 9.744 24.125 3.663 5.157
10744 -- 24 0.752 1.944 16.515 0.809 4.489
41
60-E PROFILE LIST

22405 -- 26 0.560 4.926 1.563 1.895 0.665
15907 -- 26 0.740 5.962 2.059 2.451 0.859
11218 -- 25 0.944 2.530 30.965 0.981 6.147
81203 23280 + 16748 27 1.087 6.748 25.253 2.104 2.502
81202 23281 + 16749 27 1.111 5.567 19.415 2.532 2.171
13882 -- 28 1.491 34.302 31.829 8.224 8.123
13168 -- 28 1.601 39.545 47.213 9.905 9.507
42
PROFILE LIST 60-E

10680 -- 28 0.725 1.878 10.019 0.761 2.956
11219 -- 25 0.311 0.409 1.321 0.273 0.574
12908 -- 29 1.403 45.759 32.227 9.273 10.742
12909 -- 29 1.063 22.592 15.881 7.531 4.380
12910 -- 29 1.792 42.705 80.463 14.235 13.466
09437 -- 30 0.705 2.124 14.612 1.004 4.871
10809 -- 30 0.394 0.966 7.961 0.528 2.654
43
60-E PROFILE LIST

10706 -- 31 0.237 0.101 1.834 0.103 0.917
10746 -- 30 0.370 0.199 5.849 0.163 1.950
10366 -- 30 0.310 0.122 5.264 0.129 1.755
11061 -- 30 0.298 0.105 4.049 0.121 1.472
10368 -- 30 0.518 10.077 1.393 3.359 0.852
10704 -- 31 0.497 0.628 16.111 0.425 3.625
09438 -- 31 0.700 1.264 15.273 0.757 4.459
44
PROFILE LIST 60-E

09439 -- 31 0.617 1.038 11.882 0.602 3.961
10703 -- 31 0.832 0.309 17.392 0.404 4.319
09436 -- 32 0.756 0.345 9.539 0.291 3.289
10745 -- 32 0.605 0.119 7.188 0.133 2.478
11060 -- 32 0.537 0.103 5.605 0.181 2.156
10365 -- 32 0.771 0.179 8.856 0.266 3.157
10705 -- 31 0.406 0.088 2.284 0.108 1.231
45
60-E PROFILE LIST

11956 -- 33 0.541 0.572 2.583 0.649 1.244
11059 -- 33 0.229 0.184 0.319 0.179 0.316
13279 -- 33 0.334 0.576 0.483 0.527 0.510
10529 -- 33 0.213 0.197 0.314 0.303 0.255
13953 -- 33 0.201 0.101 0.248 0.201 0.224
10696 -- 33 0.290 0.820 0.608 0.532 0.401
21073 -- 33 0.167 0.130 0.187 0.185 0.170
46
PROFILE LIST 60-E

21074 -- 33 0.331 0.071 0.695 0.102 0.483
11472 -- 33 0.365 0.371 0.337 0.349 0.435
24373 -- 26 0.407 1.414 1.355 0.684 1.081
11434 -- 33 0.454 0.234 0.776 0.249 0.483
10164 -- 32 1.820 11.880 28.025 2.564 10.191
11184 -- 32 1.268 4.082 16.519 2.316 6.478
11328 -- 35 6.410 160.469 615.244 24.327 63.102
47
60-E PROFILE LIST

14699 12 3.370 432.953 66.556 48.962 22.185
14700 12 2.792 355.364 61.985 41.426 20.661
10296 -- 34 4.312 -- -- -- --
09725 -- 34 1.648 -- -- -- --
09458 -- 34 1.768 -- -- -- --
10682 -- 34 1.133 -- -- -- --
48
ACCESSORIES 60-F
ACCESSORIES
49
60-F ACCESSORIES
Gasket / Accessories
Section Description Unit
Reference
EPDM RUBBER
GE-G-055 USED WITH Linear Meter
MULLION / TRANSOM
EPDM RUBBER
USED WITH
GE-G-033 Linear Meter
BRUSHER PLATTE &
SASH 13913
EPDM RUBBER
GE-G-034 USED WITH SASH Linear Meter
13212
EPDM RUBBER
GE-G-039 USED WITH GLASS Linear Meter
SPACER
EPDM RUBBER
GE-CW-050 USED WITH FRAME Linear Meter
81203
EPDM RUBBER USED

GE-CW-03 WITH SASH Linear Meter
81202
EPDM RUBBER
GE-G-045 USED WITH FRAME Linear Meter
81203
EPDM RUBBER
GE-CW-043 USED WITH SASH Linear Meter
81202
50
ACCESSORIES 60-F
Gasket / Accessories
Section Description Unit
Reference
EPDM RUBBER
GE-G-041 USED WITH GLASS Linear Meter
SPACER
EPDM RUBBER
10744
THERMAL
GE-I-01 Linear Meter
STRP
EPDM RUBBER FOR

GE-G-060 TRANSOM COVER CLIP Linear Meter
EPDM RUBBER
& SASH
GE-I-02 STRIP THERMAL Linear Meter
GE-STAY ARM FRICTION STAY ARM Piece
GE-LOCKING SYSTEM LOCKING SYSTEM Piece
51
ASSEMBLY DRAWINGS 60-G
ASSEMBLY DRAWINGS
53
60-G ASSEMBLY DRAWINGS
60mm 4-way Structural Glazing
All dimensions in cross

mm sections are shown in mm
Visible are
Profile area_
not_ necessarily
___ shown to scale
54

Detail - 1
55

Detail - 2
16741
56

Detail - 3
16741
57

Detail - 4
58

Detail - 5
59

Detail - 6
60
61
60mm Conventional

Visible are
Profile area_
not_ necessarily
___ shown to scale
62
60mm Conventional
Detail - 1
63
60mm Conventional
Detail - 2
64
60mm Conventional
Detail - 3
65
60mm Conventional
Detail - 4
66
60mm Conventional
Detail - 5
67
60mm Conventional
Detail - 6
68
60mm Conventional
69

Visible are
Profile area_
not_ necessarily
___ shown to scale
70

Detail - 1
GE-I-02
71

Detail - 2
72

Detail - 3
73

Detail - 4
74

Detail - 5
75

Detail - 6
76
77

Thermal Break
78

Detail - 1
79

Detail - 2
80

Detail - 3
81

Detail - 4
82

Detail - 5
83

Detail - 6
84

Thermal Break
85
3D SECTIONS 60-H
3D SECTIONS
87
60-H 3D SECTIONS
60mm Curtain Wall
13322
Mullion
11328
Bracket
M10 x 100
S.S.Anchor Bolt
M10 x 100
S.S.Bolt
13278
M10 Nut Transom
11184
Connector
13278
Transom
M3.5 x 19
11184
P.H.Screw
Connector
13322
M4 x 19 Mullion
F.H.Screw
88
3D SECTIONS 60-H
60mm Structural Glazing
16741
Mullion
16741
Mullion
16742
Transom
16742
Transom
16742
Transom
16742
Transom
16741
21074 Mullion
Toggler
16742
Transom
16741
Mullion
16742
Transom
21074
Toggler
21074
Toggler
89
60-H 3D SECTIONS
60mm Curtain Wall
GE-G-039
10745
Pressure plate
13278
Mullion GE-G-047 GE-G-033
10744 10746
Frame Cover Cap
13212
Sash
GE-G-039
13322
Transom
Insulated glass
thickness 24mm
GE-G-039
GE-G-033
Insulated glass
thickness 24mm
10745 10746
Pressure Plate Cover Cap
90
3D SECTIONS 60-H
60mm Curtain Wall
13278
Mullion
GE-G-039
GE-G-033 10746
Cover Cap
10745
Pressure plate
13322
Transom
GE-G-039
10746
GE-G-039 Cover Cap
GE-G-033
10745
Pressure plate 10746
Cover Cap 10745
Pressure plate
91
All rights reserved.
No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830
Email: mail@gulfex.com • Visit us at www.gulfex.com

CW50MM

Uploaded by

Copyright:

Available Formats

CW50MM

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CW50MM

Uploaded by

Copyright:

Available Formats

Curtain Wall 60mm

60 - B QUALITY AND CERTIFICATIONS 04 - 09

60 - C INTRODUCTION TO THE SYSTEM 10

INTERNATIONAL STANDARD COMPLIANCE

Extrusions Dimensions Tolerances: Powder Coated Finish: Anodizing Finish:

• BS EN 755 - 9:2008 • BS:6496 Clause: 10.4, 10.5, • BS EN 12373-1 2001 Clause 7

PRODUCT QUALITY CERTIFICATES

Qualicoat (European Powder Coaters Association):

Qualanod (European Anodizers Association):

• ISO/TS 16949:2009 (Management System)

Membership in International Organization:

ALLOY 6005A ALLOY 6060

Element Minimum Maximum Element Minimum Maximum

Si 0.50 0.90 Si 0.30 0.60

Fe - 0.35 Fe 0.10 0.30

Mg 0.40 0.70 Mg 0.35 0.60

Other Each - 0.05 Other Each - 0.05

Other Total - 0.15 Other Total - 0.15

Aluminium Remainder Aluminium Remainder

ALLOY 6063 ALLOY 6082

Element Minimum Maximum Element Minimum Maximum

Si 0.20 0.60 Si 0.70 1.30

Mn - 0.10 Mn 0.40 1.00

Mg 0.45 0.90 Mg 0.60 1.20

Cr - 0.10 Cr 0.04 0.15

Other Each - 0.05 Other Each - 0.05

Other Total - 0.15 Other Total - 0.15

Aluminium Remainder Aluminium Remainder

Element Minimum Maximum

Other Each - 0.05

Other Total - 0.15

Authorization to use the quality sign

From Gulf Extrusions the following powder types are available

• Polyester Façade (PE-F)

This surface treatment process involves the following pre-treatment

Authorization to use the quality sign

INTRODUCTION TO THE SYSTEM

CW 60 uses the same structures for multifunctional applications:

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Mullion / Transom Profiles

Frame / Sash Profiles

Frame / Sash Profiles

Frame / Sash Profiles

Frame / Sash Profiles

Frame / Sash Profiles

Profile Child Weight IX IY WX WY

13278 -- 19 4.248 91.619 648.512 30.540 63.908

13474 -- 18 2.349 46.660 199.991 15.553 27.398

13322 -- 18 3.262 65.297 273.536 21.766 34.458