Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 487 views

    Installation and Usage Guide of The New Generic USB DAC Driver For FiiO Players

    Uploaded by

    Armando Sgabei
    The document provides installation and usage instructions for a new generic USB DAC driver for FiiO digital audio players. It details downloading and installing the driver, setting the FiiO player as the default audio output device in Windows, and using the player as a USB DAC with audio software like foobar2000 to listen to music from a computer. The appendix addresses issues that may occur with driver signature enforcement on some Windows 7 systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Installation and Usage Guide of The New Generic USB DAC Driver For FiiO Players

    Uploaded by

    Armando Sgabei
    487 views16 pages
    The document provides installation and usage instructions for a new generic USB DAC driver for FiiO digital audio players. It details downloading and installing the driver, setting the FiiO player as the default audio output device in Windows, and using the player as a USB DAC with audio software like foobar2000 to listen to music from a computer. The appendix addresses issues that may occur with driver signature enforcement on some Windows 7 systems.

    Original Description:

    dac fiio guide drivuh yo

    Original Title

    Installation and Usage Guide of the New Generic USB DAC Driver for FiiO Players

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides installation and usage instructions for a new generic USB DAC driver for FiiO digital audio players. It details downloading and installing the driver, setting the FiiO player as the default audio output device in Windows, and using the player as a USB DAC with audio software like foobar2000 to listen to music from a computer. The appendix addresses issues that may occur with driver signature enforcement on some Windows 7 systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    487 views16 pages

    Installation and Usage Guide of The New Generic USB DAC Driver For FiiO Players

    Uploaded by

    Armando Sgabei
    The document provides installation and usage instructions for a new generic USB DAC driver for FiiO digital audio players. It details downloading and installing the driver, setting the FiiO player as the default audio output device in Windows, and using the player as a USB DAC with audio software like foobar2000 to listen to music from a computer. The appendix addresses issues that may occur with driver signature enforcement on some Windows 7 systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16
    At a glance
    Powered by AI
    The document outlines the installation process and usage instructions for a generic USB DAC driver that allows different FiiO player models to connect to a computer as a DAC.

    Update the player firmware, switch the USB mode to USB DAC, connect the player to the computer, download and run the driver setup file, select installation location and complete installation.

    Click 'Install this driver software anyway' to continue the installation.

    Installation and usage guide of the new generic USB

    DAC driver for FiiO players

    In order to bring more convenience to our users, we have specially developed a

    new generic USB DAC driver for our players that have DAC function. Now with just

    one installation of the new driver, you will be able to connect different models of

    FiiO player to your computer as DAC.

    The new driver has also been implemented with new icons and interface. And

    below are the detailed instructions of the installation and usage (We will use the

    X7 and Windows 10 as an example).

    A. Install the generic USB DAC driver

    (Note: The driver can be installed directly on Windows 8/8.1/10. But for some

    versions of Windows 7 you may need to first disable the driver signature

    enforcement before the installation. If you are using Windows 7, please see the

    Appendix at the end of the tutorial for more information.

    1. Update the X7 to the latest version of firmware, then switch the USB mode from

    "Storage" to "USB DAC"in the pull-down menu (On other players, please switch

    the mode in System settings->USB mode).


    2. Connect the X7 to the computer via USB.

    3. Download the driver package from our official website:

    http://fiio.net/en/supports, then unzip the package and double click to run the

    "FiiO_USB_DAC_Driver)Setup_v3.34.0.exe" .
    4. At the Welcome page, click "Next". If the player is connected successfully the

    application will enter the Choose Install Location page as in Step 5. If not, please

    try to re-connect the player to the computer.

    5. At the Choose Install Location page, Click "Install" to start the installation (it's

    recommended to use the default Install location).


    6. On Windows 7, there might be a pop-up windows appearing with a warning

    notice. If it appears, please simply click "Install this driver software anyway" to
    continue. (This would happen because that some versions of Windows 7 might

    not support the type of driver signature that we use. But on Windows 8/8.1/10,

    there shall not be such a problem).

    Special notice:

    The driver program will generally do some sensitive operations on the Windows system, such as
    modifying the I/O configuration and Windows registry. For a few anti-virus softwares (e.g.
    Virustotal), they may automatically prohibit the driver from doing these operations or
    mistakenly recognize the program as a malware. If that happens, please kindly set the anti-virus
    software to trust the driver setup program and allow its operations. There's no need to worry
    about the safety issues regarding to our driver program, but it's highly suggested to always
    download the driver package from our official website: http://fiio.net/en/supports
    7. At the Complete page, click "Next" then "Finish" to complete the isntallation.
    8. After the installation completes successfully, you can find the X7 listed under

    the category "Sound, video and game controller" in Device Manager.


    B. Use the FiiO player as USB DAC for computers

    (In this tutorial, we will be using the X7 and foobar2000 as an example of using the

    player as USB DAC for computers.)

    1. After the X7 is connected successfully to the computer as DAC, you will find a

    "FiiO Control Panel" icon displayed in the notification area at the bottom right

    corner of the desktop screen.

    2. Right click the Sound icon in the notification area, then click "Playback devices".
    3. In the Sound panel, select the X7, click "Set default" then click OK to set the X7

    as default playback device.


    4. Open the foobar2000 and select File->Preferences.

    5. Under the "Output" category, select the X7 from the Device list then click OK.

    After the above operations, you can plug your headphone to the X7 and start to

    enjoy the music played on your computer in high quality!


    Appendix I: Disable driver signature enforcement on Windows 7

    For some versions of Windows 7, it cannot properly recognize the type of driver

    signature that we use and will cause the installation to fail. So you need to disable

    the driver signature enforcement before the installation.

    (But if it still fails after disabling the driver signature enforcement, you may also

    need to update your system. In that case, please check Appendix II).

    Method 1

    1. Press the Winows key + R on the keyboard to open the Run box, then enter

    gpedit.msc and click OK

    2. In the "Local Group Policy Editor" window, select User Configuration

    ->Administrative Templates->System->Driver Installation. Then in the setting

    area, double click the "Code signing for device drivers" option (Or right click

    then select edit).


    3. In the "Code signing for device drivers" windows, select the "Disable" option

    and click OK. After that the driver signature enforcement will be disabled.
    4. For safety, it's recommended to enable the driver signature enforcement again

    after the DAC driver installation completes.

    Method 2:

    1. Go to Start->All programs->Accessories, then right click Command Prompt and

    select "Run as administrator". Or you can search for it using the Search box.
    2. Enter the below command in the cmd menu. (You may also try to copy the

    command then right click on the cmd menu, select Paste and press the Enter key).
    bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS
    3. If the cmd shows the prompt "The operation completed successfully", then it

    means the driver signature enforcement has been disabled.

    4. For safety, it's recommended to enable the driver signature enforcement with

    the below command after the driver installation completes.


    bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
    Appendix II: Update Windows 7 for accepting SHA256 certificates

    Our driver package is signed with a SHA256 certificate. Windows 8 and 10 accept

    this SHA256 certificate by default.

    On Windows 7 Microsoft has released a patch to also accept SHA256 certificates.

    You will get it through Windows update or you can be downloaded here:

    https://www.microsoft.com/en-us/download/details.aspx?id=46148

    The description from Microsoft can be found here:

    https://support.microsoft.com/en-us/kb/3033929

    Windows 7 only accepts SHA1 certificates by default. But SHA1 certificates are

    deprecated and shouldn't be used anymore. You also don't get new SHA1

    certificates from the certificate providers.

    Please update your Windows 7 systems and try again installing the driver.

    You might also like