MJ.

JL Female joint / joint

Port size 1/8 to 1/2 (Rc or R)
Refrigerating
type dryer
Desiccant
type dryer
High polymer
membrane
type dryer

Air filter

䢇 Stable and secure piping due to double chuck. This is an excellent tightening joint with high reliability. Auto. drain
/ others

AOI Co, Ltd. F.R.L.

(Module unit)
F.R.L.
䡵 Straight type (Separate)
Compact
F.R.
Single straight Straight Female, straight Bulk head Bulk head female
Precise
MJS*-* MJS*-0 MJS*-*-M MJS*-0-X MJS*-*-E regulator
Applicable Applicable Applicable F.R.L.
Applicable Applicable (Related
tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø products)
Clean
4 4 4 4 4 F.R.
6 6 6 6 Electro
6 pneumatic
regulator
8 8 8 8
8 Air
10 10 10 10 booster
10
12 12 12 12 Speed
control valve
15 15 15 15
• Page : 971 • Page : 971 • Page : 971 • Page : 971 • Page : 972 Silencer

Check valve
䡵 Elbow type 䡵 Tee union type / others
Female joint MJ Series

Joint
Single elbow Elbow MJL*-0 Female, elbow Turn elbow Both push-in branch / tube

MJL*-* MJL*-*-M MJL*-*-T MJT*-* Vacuum

filter
Applicable Applicable Applicable Applicable Applicable Vacuum
tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø regulator

4 4 4 4 4 Suction
plate
6 6 6 6 6 Magnetic
spring buffer
8 8 8 8 8
Mechanical
10 10 10 10 10 pressure SW
12 12 12 12 12 Electronic
pressure SW
15 15 15 15 Contact / close
• Page : 972 • Page : 972 • Page : 972 • Page : 973 • Page : 973 contact conf.
SW

Air sensor

Pressure SW
D type union Tee Union Tee Female, union Tee Sleeve Insert ring for coolant
MJT*-*-D MJT*-0 MJT*-*-M MJN*-0 MJU*-0 Small
flow sensor
Applicable Applicable Applicable Applicable Applicable
Small
tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø tube O.D.ø flow controller
4 4 4 4 4 Flow sensor
for air
6 6 6
6 6 Flow sensor
8 8 8 for water
8 8
10 10 10 Total air
system
10 10
12 12 12 Total air
system
15 15 12 15 12 (Gamma)
• Page : 973 • Page : 973 • Page : 974 • Page : 974 • Page : 974
Ending
Female joint
Joint / tube

Elbow/JL

Port size
R,Rc
1/8
Joint

1/4

3/8

1/2

• Page : 975
䢇Sales unit is 10 pieces/1 bag.
969
 MJ Series
Refrigerating Specifications
type dryer
Descriptions MJ
Desiccant
type dryer Working fluid Compressed air
High polymer
membrane Max. working pressure MPa 1.0
type dryer
Working temperature °C -10 to 60 (no freezing)
Air filter
Soft nylon tube (F-15**), Urethane tube (U-95**) Note
Auto. drain Applicable tube
/ others Coiling tube (KX-12**)
F.R.L. Note: Refer to page 1008 for tube dimensions, ambient temperature and working pressure.
(Module unit)
F.R.L.
(Separate)
Compact
F.R.
Precise
regulator
F.R.L. How to order
(Related
products)
* Refer to model no. sections
Clean
F.R.
MJ S 4 6 M on dimensions page (pages
971 to 974) for combination
Internal structure and parts list
Electro of model no.
pneumatic
regulator
Air A Shape
booster
A Shape
Speed S Straight
control valve
L Elbow
Silencer T Union Tee
Check valve N Sleep 2 3 1
/ others
U Insert ring
Joint
/ tube B Applicable tube O.D.
Vacuum B Applicable
filter 4 ø4
tube O.D.
Vacuum 6 ø6
regulator
8 ø8
Suction
plate 10 ø10 No. Parts name Material
Magnetic 12 ø12
spring buffer 1 Body Brass
Mechanical 15 ø15
pressure SW
2 Nut Brass
C Port size
Electronic C Port size 3 Sleep Brass
pressure SW 6 R1/8
Contact / close
contact conf. 8 R1/4
SW
10 R3/8 Safety Precautions
Air sensor
15 R1/2
Pressure SW 䢇 If urethane or soft nylon tube is used in high working
for coolant 0 Without screw temperature, use insert ring (Refer to page 974). If an
Small D Other combinations insert ring is not used, tube may come off from a joint.
flow sensor D Other 䢇 For copper tube, use a tube with class 1/2H (heat
combinations D D type
Small treatment) or less and tube wall thickness 1mm or
flow controller E Bulk head female less.
Flow sensor M Female 䢇 If a tube is used where a tube mo ves frequently,
for air troubles may occur. So, avoid use in such place.
Flow sensor T Turn
for water
X Bulk head
Total air
system Note: Sales unit is 10 pieces /1 bag.
Total air
system
(Gamma)

Ending

Mounting and removal

(1) Couple the nut and sleeve plastic tube or cupper tube as shown in
Nut Sleeve Body the figure, insert the tube until hitting the joint (tube end), then
tighten the nut by hand.
(2) Tighten the nut by spanner, etc. Applicable tightening turn is 1 3/4
for plastic tube, while 1 1/4 to 1 1/2 for copper tube (1/2H and wall
thickness 1mm).
(3) Cut tube as right angle as possible, please eliminate burr and
Tube
foreign matter, etc.
(4) For temporally tightening, turn should be 1/4 turn less than appli-
cable tightening turn, while to tighten securely, tighten 1/4 turn
more. For retightening, also 1/4 turn more.

970
 MJ Series
Dimensions
Dimensions: Single straight, straight, female straight, bulk head Refrigerating
type dryer

䢇 Single straight MJS*-* 䢇 Straight MJS*-0 Desiccant

type dryer
H1(opposite H2(opposite High polymer
M side of hexagon) side of hexagon) membrane
type dryer
H1(opposite side H2(opposite side
of hexagon) of hexagon) Air filter

Auto. drain
/ others
F.R.L.
(Module unit)
A B
L F.R.L.
(Separate)
B B
* L and B dimensions show rough dimensions before fixing nut. L Compact
F.R.
Applicable Min. Effective
Model no. M H1 H2 L A B bore sectional Precise
tube O.D.ø size area (mm2) regulator
MJS4-6 4 R1/8 10 10 22.5 8 11 3 4.1 F.R.L.
(Related
MJS4-8 4 R1/4 14 10 26 11 11 3 3.9 products)
Clean
MJS6-6 6 R1/8 10 12 23.5 8 11.5 4.5 7.9 F.R.
MJS6-8 6 R1/4 14 12 27 11 11.5 4.5 7.8 Electro
pneumatic
regulator
MJS6-10 6 R3/8 17 12 28.5 12 11.5 4.5 7.9
Air
MJS8-6 8 R1/8 12 14 25.5 8 13 6 19.5 booster

MJS8-8 8 R1/4 14 14 28.5 11 13 6 20.1 Speed

control valve
MJS8-10 8 R3/8 17 14 30 12 13 6 19.5
Silencer
* L and B dimensions show rough dimensions before fixing nut.
MJS10-8 10 R1/4 14 17 30.5 11 14.5 8 36.1
Applicable Min. Effective Check valve
MJS10-10 10 R3/8 17 17 31.5 12 14.5 8 36.1 Model no. tube O.D.ø H1 H2 L B bore sectional / others
size area (mm2)
MJS10-15 10 R1/2 22 17 34.5 15 14.5 8 36.1 Joint
MJS4-0 4 8 10 25.5 11 3 4.3 / tube
MJS12-8 12 R1/4 16 19 32 11 16 9 57.8
MJS6-0 6 10 12 27.5 11.5 4.5 8.1 Vacuum
MJS12-10 12 R3/8 17 19 33 12 16 10 55.5 filter
MJS8-0 8 12 14 31 13 6 25.2
Vacuum
MJS12-15 12 R1/2 22 19 36 15 16 10 57.8
MJS10-0 10 14 17 34 14.5 8 43.2 regulator
MJS15-10 15 R3/8 20 23 37 12 19 12 113.3 Suction
MJS12-0 12 16 19 37 16 10 68.6 plate
MJS15-15 15 R1/2 23 23 40 15 19 12 115.2
MJS15-0 15 20 23 44 19 12 106.0 Magnetic
spring buffer
Mechanical
䢇 Female, straight MJS*-*-M 䢇 Bulk head MJS*-0 X pressure SW
Electronic
H2(opposite side pressure SW
H (opposite side
M A of hexagon) of hexagon) Contact / close
contact conf.
SW

Air sensor

Pressure SW
for coolant
øA

Small
H1 B flow sensor
(opposite side L Small
of hexagon) flow controller
B B
* L and B dimensions show rough dimensions before fixing nut. Flow sensor
L for air
Applicable Min. Effective
Model no. M H1 H2 L A B bore sectional Flow sensor
tube O.D.ø size area (mm2) for water
MJS4-6-M 4 Rc1/8 13 10 20 8 11 3 4.0 Total air
system
MJS4-8-M 4 Rc1/4 17 10 23 11 11 3 4.8
Total air
system
MJS6-6-M 6 Rc1/8 13 12 21 8 11.5 4.5 8.1 (Gamma)
MJS6-8-M 6 Rc1/4 17 12 24 11 11.5 4.5 8.6
Ending
MJS6-10-M 6 Rc3/8 20 12 25 12 11.5 4.5 14.4
Female joint

MJS8-6-M 8 Rc1/8 13 14 22.5 8 13 6 15.1

Joint / tube

MJS8-8-M 8 Rc1/4 17 14 25.5 11 13 6 20.1

MJS8-10-M 8 Rc3/8 20 14 26.5 12 13 6 25.1
* L and B dimensions show rough dimensions before fixing nut. Mounting plate thickness 4mm or less
MJS10-8-M 10 Rc1/4 17 17 27 11 14.5 8 36.1 Installation Min. Effective
Applicable
MJS10-10-M 10 Rc3/8 20 17 28 12 14.5 8 34.4 Model no. H L B hole bore sectional A
tube O.D.ø diameter size area (mm2)
MJS10-15-M 10 Rc1/2 26 17 31 15 14.5 8 34.4 MJS4-0-X 4 10 39 11 9 3 3.9 18
MJS12-8-M 12 Rc1/4 17 19 28.5 11 16 10 55.2 MJS6-0-X 6 12 43 11.5 11 4.5 7.7 22
MJS12-10-M 12 Rc3/8 20 19 29.5 12 16 10 55.5 MJS8-0-X 8 14 47 13 13 6 25.9 24
MJS12-15-M 12 Rc1/2 26 19 33 15 16 10 55.5 MJS10-0-X 10 17 51 14.5 15 8 41.1 28
MJS15-10-M 15 Rc3/8 20 23 33 12 19 12 73.7 MJS12-0-X 12 19 54 16 17 10 67.6 32
MJS15-15-M 15 Rc1/2 26 23 36 15 19 12 103.3 MJS15-0-X 15 23 63 19 21 12 97.0 40

971
 MJ Series
Refrigerating
Dimensions: Bulk head female, single elbow, female, elbow, elbow
type dryer
Desiccant 䢇 Bulk head female MJS*-*-E 䢇 Single elbow MJL*-*
type dryer
High polymer H (opposite side
membrane A B L2 of hexagon)
type dryer M

Air filter

Auto. drain
/ others

L1
øD
F.R.L. B

A
(Module unit)
M
F.R.L.
(Separate) H1
(opposite side C H2 * L2 and B dimensions show rough dimensions before fixing nut.
Compact
of hexagon) (opposite side of hexagon) Min. Effective
F.R. L Applicable
Model no. tube O.D.ø M H L1 L2 A B bore sectional
Precise size area (mm2)
regulator
MJL4-6 4 R1/8 10 17 20 8 11 3 3.7
F.R.L.
(Related MJL4-8 4 R1/4 10 20 20 11 11 3 4.0
products)
Clean MJL6-6 6 R1/8 12 17 20.5 8 11.5 4.5 7.8
F.R.
Electro MJL6-8 6 R1/4 12 20 20.5 11 11.5 4.5 7.8
pneumatic
regulator MJL6-10 6 R3/8 12 24 23.5 12 11.5 4.5 8.1
Air
booster MJL8-6 8 R1/8 14 18 23 8 13 6 18.1
Speed MJL8-8 8 R1/4 14 21 23 11 13 6 16.8
control valve
MJL8-10 8 R3/8 14 24 25 12 13 6 18.5
Silencer
MJL10-8 10 R1/4 17 23 26.5 11 14.5 8 31.4
Check valve * L and B dimensions show rough dimensions before fixing nut. Mounting plate thickness 4mm or less MJL10-10 10 R3/8 17 24 26.5 12 14.5 8 31.4
/ others
Applicable Installation Min. Effective MJL10-15 10 R1/2 17 28 28.5 15 14.5 8 32.8
Joint Model no. tube M H11 H2 L A B C hole bore sectional D
/ tube O.D.ø diameter size area (mm2) MJL12-8 12 R1/4 19 24 29 11 16 9 46.6
Vacuum 夝 MJS4-6-E 4 Rc1/8 12 10 34 8 11 9.5 9 3 5.2 18
filter MJL12-10 12 R3/8 19 25 29 12 16 10 48.1
MJS6-8-E 6 Rc1/4 17 12 40 11 11.5 13 11 4.5 13.2 22 MJL12-15 12 R1/2 19 29 15 16 49.8
Vacuum 28 10
regulator MJS8-8-E 8 Rc1/4 17 14 42.5 11 13 13 13 6 25.6 24 MJL15-10 15 R3/8 23 26 34 12 19 12 88.3
Suction
夝 MJS10-10-E 10 Rc3/8 20 17 45.5 12 14.5 14 15 8 40.1 28
plate MJL15-15 15 R1/2 23 29 34 15 19 12 92.2
Magnetic Model No. with “*” is available as custom order. Consult with CKD.
spring buffer
Mechanical 䢇 Female, elbow MJL*-*-M 䢇 Elbow MJL*-0
pressure SW
Electronic
pressure SW H (opposite side
Contact / close L2 of hexagon) L
contact conf.
SW B
Air sensor

Pressure SW
for coolant
Small
L1

flow sensor B
H (opposite side
Small
L

of hexagon)
A

flow controller
B

Flow sensor
for air M
Flow sensor
for water
Total air * L2 and B dimensions show rough dimensions before fixing nut.
system
Applicable Min. Effective
Total air M H L1 L2 A B bore sectional
system Model no. tube
O.D.ø size area (mm2)
(Gamma)
夝 MJL4-6-M 4 Rc1/8 10 18.5 20 8 11 3 4.1
Ending
夝 MJL4-8-M 4 Rc1/4 10 24 22.5 11 11 3 4.7
MJL6-6-M 6 Rc1/8 12 18.5 20.5 8 11.5 4.5 9.4
MJL6-8-M 6 Rc1/4 12 24 23.5 11 11.5 4.5 12.8
夝 MJL6-10-M 6 Rc3/8 12 27 25.5 12 11.5 4.5 13.6
夝 MJL8-6-M 8 Rc1/8 14 19.5 23 8 13 6 13.6 * L and B dimensions show rough dimensions before fixing nut.
MJL8-8-M 8 Rc1/4 14 24 25 11 13 6 21.0 Applicable Effective
Min. bore
Model no. tube H L B size
sectional
夝 MJL8-10-M 8 Rc3/8 14 27 27 12 13 6 22.8 O.D.ø area (mm2)

夝 MJL10-8-M 10 Rc1/4 17 24 26.5 11 14.5 8 29.3 MJL4-0 4 10 20 11 3 3.6

夝 MJL10-10-M 10 Rc3/8 17 27 28.5 12 14.5 8 35.7 MJL6-0 6 12 20.5 11.5 4.5 9.4
夝 MJL12-8-M 12 Rc1/4 19 25 29 11 16 10 29.3 MJL8-0 8 14 23 13 6 20.7
夝 MJL12-10-M 12 Rc3/8 19 27 29 12 16 10 51.4 MJL10-0 10 17 26.5 14.5 8 33.1
Model No. with “*” is available as custom order. Consult with CKD. MJL12-0 12 19 29 16 10 49.5
MJL15-0 15 23 34 19 12 85.4

972
 MJ Series
Dimensions
Dimensions: Turn elbow, both push-in branch, D type union Tee, Union Tee Refrigerating
type dryer
䢇 Turn elbow MJL*-*-T 䢇 Both push-in branch MJT*-* Desiccant
type dryer
L2 L2 High polymer
E B B membrane
type dryer

H1 Air filter
B H2
(opposite side Auto. drain
of hexagon) / others
H (opposite side

L1
of hexagon) F.R.L.
D

A
C

(Module unit)
L1

M
F.R.L.
(Separate)
L2

* L2 and B dimensions show rough dimensions before fixing nut. Compact

A

M F.R.
View E Min. Effective
Applicable
L3 Model no. M H L1 L2 A B bore sectional Precise
tube O.D.ø size area (mm2) regulator
MJT4-6 4 R1/8 10 17 20 8 11 3 6.7 F.R.L.
(Related
MJT4-8 4 R1/4 10 20 20 11 11 3 6.6 products)
Clean
MJT6-6 6 R1/8 12 17 20.5 8 11.5 4.5 12.4 F.R.
Electro
Applica Effective
MJT6-8 6 R1/4 12 20 20.5 11 11.5 4.5 14.4 pneumatic
regulator
ble tube sectional area MJT6-10 6 R3/8 12 24 23.5 12 11.5 4.5 15.0
Air
MJT8-6 8 R1/8 14 18 23 8 13 6 27.8 booster
* L3 and B dimensions show rough dimensions before fixing nut.
Speed
Model no.
Applicable
tube M H1 H2 L1 L2 L3 A B C D
Effective
sectional
MJT8-8 8 R1/4 14 21 23 11 13 6 28.9 control valve
O.D.ø area (mm2)
MJL4-6-T 4 R1/8 14 10 29.5 17.6 18 8 11 15 13.5 3.9
MJT8-10 8 R3/8 14 24 25 12 13 6 32.8 Silencer
MJL6-6-T 6 R1/8 14 12 29.5 17.6 19 8 11.5 15 13.5 8.3 MJT10-8 10 R1/4 17 23 26.5 11 14.5 8 46.6
Check valve
MJL6-8-T 6 R1/4 19 12 36.5 22.1 21.5 11 11.5 20 16.5 9.7 MJT10-10 10 R3/8 17 24 26.5 12 14.5 8 46.6 / others
MJL8-6-T 8 R1/8 14 14 29.5 17.6 20.5 8 13 15 13.5 13.7
MJT10-15 10 R1/2 17 28 28.5 15 14.5 8 66.2 Joint
MJL8-8-T 8 R1/4 19 14 36.5 22.1 23 11 13 20 16.5 18.0 / tube

MJL10-8-T 10 R1/4 19 17 36.5 24.5 11 14.5 20 16.5 27.4

MJT12-8 12 R1/4 19 24 29 11 16 10 61.1 Vacuum
22.1
filter
MJL10-10-T 10 R3/8 22 17 42 25 26.5 12 14.5 24 20 33.9 MJT12-10 12 R3/8 19 25 29 12 16 10 80.5
Vacuum
MJL12-10-T 12 R3/8 22 19 42 25 28 12 16 24 20 42.4 MJT12-15 12 R1/2 19 28 29 15 16 10 76.0 regulator
MJL12-15-T 12 R1/2 24 19 52.5 32 29.5 15 16 27 27 45.5
MJT15-10 15 R3/8 23 26 34 12 19 12 105.4 Suction
MJL15-15-T 15 R1/2 24 23 52.5 32 32.5 15 19 27 27 64.5 plate
MJT15-15 15 R1/2 23 29 34 15 19 12 105.4
Magnetic
spring buffer
Mechanical
䢇 D type union Tee MJT*-*-D 䢇 Union Tee MJT*-0 pressure SW
Electronic
L1 L2 L L pressure SW
A B B B Contact / close
contact conf.
SW

Air sensor

Pressure SW
M for coolant
L2

Small
B

flow sensor
H
L

(opposite side Small

B

of hexagon) flow controller

H Flow sensor
* L2 and B dimensions show rough dimensions before fixing nut.
(opposite side for air
Applicable Min. Effective of hexagon)
Model no. M H L1 L2 A B bore sectional Flow sensor
tube O.D.ø size area (mm2) for water
MJT4-6-D 4 R1/8 10 17 20 8 11 3 7.6 Total air
system
MJT4-8-D 4 R1/4 10 20 20 11 11 3 7.8 Total air
system
MJT6-6-D 6 R1/8 12 17 20.5 8 11.5 4.5 13.1 (Gamma)
MJT6-8-D 6 R1/4 12 20 20.5 11 11.5 4.5 15.7 Ending
MJT6-10-D 6 R3/8 12 24 23.5 12 11.5 4.5 14.4
Female joint

MJT8-6-D 8 R1/8 14 18 23 8 13 6 27.3

Joint / tube

MJT8-8-D 8 R1/4 14 21 23 11 13 6 28.9

MJT8-10-D 8 R3/8 14 24 25 12 13 6 36.1 * L and B dimensions show rough dimensions before fixing nut.
MJT10-8-D 10 R1/4 17 23 26.5 11 14.5 8 48.1 Min. Effective
Applicable
Model no. H L B bore sectional
MJT10-10-D 10 R3/8 17 24 26.5 12 14.5 8 49.8 tube O.D.ø size area (mm2)

MJT10-15-D 10 R1/2 17 28 28.5 15 14.5 8 68.1 MJT4-0 4 10 20 11 3 4.4

MJT12-8-D 12 R1/4 19 24 29 11 16 10 65.6 MJT6-0 6 12 20.5 11.5 4.5 7.2
MJT12-10-D 12 R3/8 19 25 29 12 16 10 76.0 MJT8-0 8 14 23 13 6 19.0
MJT12-15-D 12 R1/2 19 28 29 15 16 10 80.3 MJT10-0 10 17 26.5 14.5 8 36.1
MJT15-10-D 15 R3/8 23 26 34 12 19 12 110.4 MJT12-0 12 19 29 16 10 52.6
MJT15-15-D 15 R1/2 23 29 34 15 19 12 110.4 MJT15-0 15 23 34 19 12 100.8

973
 MJ Series
Refrigerating
Dimensions: Female union Tee, sleeve, insert ring
type dryer
Desiccant 䢇 Female, union Tee MJT*-*-M 䢇 Sleeve MJN*-0
type dryer
High polymer
Material C3604BD
membrane L2 L2
type dryer
B B
Air filter

Auto. drain
/ others

øD
F.R.L.
(Module unit)
F.R.L. H

L1
(Separate)
(opposite side
Compact of hexagon)
F.R.
A L
M
Precise
regulator
F.R.L. * L2 and B dimensions show rough dimensions before fixing nut.
(Related
products) Applicable Min. Effective
Clean
Model no. tube O.D.ø M H L1 L2 A B bore sectional
size area (mm2)
F.R.
Electro 夝 MJT4-6-M 4 Rc1/8 10 18.5 20 8 11 3 7.6
pneumatic
regulator 夝 MJT4-8-M 4 Rc1/4 10 24 22.5 11 11 3 8.6
Air MJT6-6-M 6 Rc1/8 12 18.5 20.5 8 11.5 4.5 13.9
booster
MJT6-8-M 6 Rc1/4 12 24 23.5 11 11.5 4.5 22.9
Speed Applicable
control valve
夝 MJT6-10-M Model no. øD L
6 Rc3/8 12 27 25.5 12 11.5 4.5 24.3 tube O.D.ø
Silencer 夝 MJT8-6-M 8 Rc1/8 14 19.5 23 8 13 6 14.3 MJN4-0 4 6 6
Check valve MJT8-8-M 8 Rc1/4 14 24 25 11 13 6 29.2 MJN6-0 6 8 6
/ others
夝 MJT8-10-M 8 Rc3/8 14 27 27 12 13 6 40.0 MJN8-0 8 10 7
Joint
/ tube 夝 MJT10-8-M 10 Rc1/4 17 24 26.5 11 14.5 8 29.2 MJN10-0 10 12 8
Vacuum
filter 夝 MJT10-10-M 10 Rc3/8 17 27 28.5 12 14.5 8 53.7 MJN12-0 12 14 8.5
Vacuum 夝 MJT12-8-M 12 Rc1/4 19 26 29 11 16 10 29.5 MJN15-0 15 18 10.5
regulator
夝 MJT12-10-M 12 Rc3/8 19 27 29 12 16 10 63.8
Suction
plate Model No. with “*” is available as custom order. Consult with CKD.
Magnetic
spring buffer
Mechanical 䢇 Insert ring MJ**-O
pressure SW
Material C3604BD
Electronic
pressure SW
Contact / close L
contact conf.
SW

Air sensor
øD
ød

Pressure SW
for coolant
Small
flow sensor
Small
flow controller
Flow sensor
for air
Flow sensor
for water
Total air Installation procedures
system Insert the tube into the cap nut and the sleeve in this turn, then insert the
Total air insert ring into the root of tube. Insert the tube into the joint until it stops, then
system
(Gamma) couple the cap nut and the joint.

Ending ød Comformity
Model no. L øD (Bore size) tube
MJU4-0 12 1.8 1.1 U-9504
MJU6-0 15 3.6 2.8 U-9506
MJU8-0 16 4.8 4 U-9508
MJU10-0 17 6.3 5.5 U-9510
MJU12-0 18 7.8 7 U-9512
MJF4-0 12 2.3 1.5 F-1504
MJF6-0 15 3.8 3 F-1506
MJF8-0 16 5.6 4.5 F-1508
MJF10-0 17 7.1 6.2 F-1510
MJF12-0 18 8.8 8 F-1512
MJF15-0 20 11.3 10.3 F-1515

974