Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 176 views

    Semi-Hard Flexible Ebonite: Technical Data Sheet

    Uploaded by

    hoangvubui4632
    Polycorp 1036 is a black, semi-hard flexible ebonite rubber compound made of natural and synthetic rubber. It has excellent chemical resistance up to 200°F and can be cured using autoclave, internal steam, or atmospheric steam methods. Its properties include a Shore A hardness of 85, tensile strength over 1000 psi, and 50% elongation. It is FDA compliant and suitable for applications requiring chemical resistance at elevated temperatures between 50-200°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Semi-Hard Flexible Ebonite: Technical Data Sheet

    Uploaded by

    hoangvubui4632
    176 views2 pages
    Polycorp 1036 is a black, semi-hard flexible ebonite rubber compound made of natural and synthetic rubber. It has excellent chemical resistance up to 200°F and can be cured using autoclave, internal steam, or atmospheric steam methods. Its properties include a Shore A hardness of 85, tensile strength over 1000 psi, and 50% elongation. It is FDA compliant and suitable for applications requiring chemical resistance at elevated temperatures between 50-200°F.

    Original Description:

    Ebonite

    Original Title

    Ebonie

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Polycorp 1036 is a black, semi-hard flexible ebonite rubber compound made of natural and synthetic rubber. It has excellent chemical resistance up to 200°F and can be cured using autoclave, internal steam, or atmospheric steam methods. Its properties include a Shore A hardness of 85, tensile strength over 1000 psi, and 50% elongation. It is FDA compliant and suitable for applications requiring chemical resistance at elevated temperatures between 50-200°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    176 views2 pages

    Semi-Hard Flexible Ebonite: Technical Data Sheet

    Uploaded by

    hoangvubui4632
    Polycorp 1036 is a black, semi-hard flexible ebonite rubber compound made of natural and synthetic rubber. It has excellent chemical resistance up to 200°F and can be cured using autoclave, internal steam, or atmospheric steam methods. Its properties include a Shore A hardness of 85, tensile strength over 1000 psi, and 50% elongation. It is FDA compliant and suitable for applications requiring chemical resistance at elevated temperatures between 50-200°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TECHNICAL DATA SHEET

    1036 Page 1 of 2

    1036
    SEMI-HARD FLEXIBLE EBONITE March 2015

    Polycorp 1036 is a black 85 A durometer (35 D) combination of natural rubber and synthetic rubber
    manufactured with or without soft natural rubber tie gum. It provides excellent chemical resistance at
    elevated temperature. It is FDA compliant as per 21CFR177.2600. Operating temperature range is
    o o
    from 50°F (10 C) to 200°F (93 C)

    APPLICATION NOTES: CURING:


     Skive – use closed skive construction Cure time adjustments may be required to
     Repair – Same. Refer to section 11 of application compensate for specific conditions. See Section 10
    manual.
    of the Application Manual for detailed instructions. All
     Cured Durometer – Shore A durometer of top
    surface: 85 ± 10. Shore D durometer of top recommendations below are for lining thicknesses up
    surface: 35 ± 10. to ¼”.
     Spark Test – Refer to section 13 of the Autoclave Method – 3/16” & 1/4” thickness:
    Application Manual o o
    3 hours @ 260 F/127 C (20 psi).

    ADHESIVE NOTES: Internal Steam Method – 3/16” & 1/4” thickness: 6


    See Section 6 of the Polycorp Rubber Lining Application o o
    hours @ 267 F/131 C (20 psi).
    Manual for specific cementing / adhesion notes.
    o
    For proper adhesion, temperatures must be over 60 F Atmospheric Steam Method - Up to 1/4”
    o o o o o
    (15 C) and must not exceed 120 F (49 C). thickness: Minimum 30 hours @ 212 F /100 C
    Use adhesives in well ventilated area and always consult Lower durometer readings may result with this type
    the material safety data sheet for specific precautions. cure.

    Polycorp Approved
    Coat
    Adhesive Equivalent
    st
    1 Coat on Metal C-90 Primer Chemlok 289
    nd
    2 Coat on Metal C-91 Intermediate Chemlok 290
    rd
    3 Coat on Metal C-202S Tack Chemlok 286
    th
    4 Coat on lining C-202S Tack Chemlok 286

    INNOVATION / QUALITY / SOLUTIONS / TECHNICAL SUPPORT


    +1-519-846-2075 / +1-800-265-2710 / www.poly-corp.com
    TECHNICAL DATA SHEET
    1036 Page 2 of 2

    STORAGE:
    Store in a cool and dry area.
    Shelf Life
    o
    Stored below 50 F (10oC) 180 days
    o
    Stored between 51 and 70 F 90 days
    o
    Stored between 71 and 90 F 45 days
    o
    Do not store above 90 F (32oC)

    Depending on storage conditions it may be possible to use rubber linings beyond the recommended shelf life
    however additional testing must be completed. Please contact Polycorp for recommended test procedures. A
    sample of the rubber lining can also be sent back to Polycorp for verification.

    Storage, handling and application methods must conform to the Polycorp Rubber Lining Application Manual.

    TYPICAL PROPERTIES:
    Property Value ASTM Test Method

    Hardness (Face) (points) 35 D ± 10 D2240

    Tensile Strength (min, psi) 1000 psi D412

    Elongation at Break (min, %) 50 D412

    Specific Gravity 1.18 D297

    Adhesion to Metal (min, lbf/in) 25 D429


    o o
    Operating Temperature Range for Optimum 50°F (10 C) to 200°F (93 C) N/A
    Service Life

    All physical property values developed and measured using a press-cured sample sheet prepared in accordance
    with ASTM D3182.

    PRECAUTIONS:
     This is a hard rubber compound. Over curing will cause brittleness.
     Do not use in transport equipment. This lining may not be suitable for equipment that may be exposed to
    °
    extremely low temperatures. If temperatures will be below 32 F/0 ° C, contact Polycorp with all the service
    conditions for a specific recommendation.

    °
    Cool down to 120 F/49 ° C before releasing pressure during pressure cure.
     Do not ship lined tank below 20 °F.

    INNOVATION / QUALITY / SOLUTIONS / TECHNICAL SUPPORT


    +1-519-846-2075 / +1-800-265-2710 / www.poly-corp.com

    You might also like