9702 s09 QP 4 PDF

UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS
General Certificate of Education Advanced Level

*8781528465*
PHYSICS 9702/04
Paper 4 A2 Structured Questions May/June 2009
1 hour 45 minutes
Candidates answer on the Question Paper.
No Additional Materials are required.
READ THESE INSTRUCTIONS FIRST
Write your Centre number, candidate number and name on all the work you hand in.
Write in dark blue or black pen.
You may use a soft pencil for any diagrams, graphs or rough working.
Do not use staples, paper clips, highlighters, glue or correction fluid.
DO NOT WRITE IN ANY BARCODES.
For Examiner’s Use
Answer all questions.
You may lose marks if you do not show your working or if you do not use 1
appropriate units.
2
At the end of the examination, fasten all your work securely together.
The number of marks is given in brackets [ ] at the end of each question or part 3
question. 4
10
11
12
13
Total
This document consists of 22 printed pages and 2 blank pages.
SP (NF/CGW) T73027/3
© UCLES 2009 [Turn over
www.xtremepapers.net
2
Data
speed of light in free space, c = 3.00 × 10 8 m s –1
permeability of free space, ␮0 = 4π × 10 –7 H m–1
permittivity of free space, ε0 = 8.85 × 10 –12 F m–1
elementary charge, e = 1.60 × 10 –19 C
the Planck constant, h = 6.63 × 10 –34 J s
unified atomic mass constant, u = 1.66 × 10 –27 kg
rest mass of electron, me = 9.11 × 10 –31 kg
rest mass of proton, mp = 1.67 × 10 –27 kg
molar gas constant, R = 8.31 J K –1 mol –1
the Avogadro constant, NA = 6.02 × 10 23 mol –1
the Boltzmann constant, k = 1.38 × 10 –23 J K –1
gravitational constant, G = 6.67 × 10 –11 N m 2 kg –2
acceleration of free fall, g = 9.81 m s –2
© UCLES 2009 9702/04/M/J/09
3
Formulae
uniformly accelerated motion, s = ut + at 2

v 2 = u 2 + 2as
work done on/by a gas, W = p⌬V
gravitational potential, φ = – Gm
r
hydrostatic pressure, p = ρgh
Nm 2
pressure of an ideal gas, p = V
<c >
simple harmonic motion, a = – ω 2x
velocity of particle in s.h.m., v = v0 cos ωt

⎯ ⎯ ⎯02⎯ ⎯ ⎯ –⎯ x⎯ ⎯ ⎯ 2⎯ )
v = ± ω √⎯(x
Q
electric potential, V =
4πε0r
capacitors in series, 1/C = 1/C1 + 1/C2 + . . .
capacitors in parallel, C = C1 + C2 + . . .
energy of charged capacitor, W = QV
resistors in series, R = R1 + R 2 + . . .
resistors in parallel, 1/R = 1/R1 + 1/R2 + . . .
alternating current/voltage, x = x0 sin ωt
radioactive decay, x = x0 exp(– λt )
0.693
decay constant, λ =
t
© UCLES 2009 9702/04/M/J/09 [Turn over
4
Section A For
Examiner’s
Answer all the questions in the spaces provided. Use
1 (a) Define gravitational field strength.
..........................................................................................................................................
.................................................................................................................................... [1]
(b) A spherical planet has diameter 1.2 × 104 km. The gravitational field strength at the
surface of the planet is 8.6 N kg–1.
The planet may be assumed to be isolated in space and to have its mass concentrated
at its centre.
Calculate the mass of the planet.
mass = .......................................... kg [3]
(c) The gravitational potential at a point X above the surface of the planet in (b) is
– 5.3 × 107 J kg–1.
For point Y above the surface of the planet, the gravitational potential is
– 6.8 × 107 J kg–1.
(i) State, with a reason, whether point X or point Y is nearer to the planet.
..................................................................................................................................
..................................................................................................................................
............................................................................................................................ [2]
(ii) A rock falls radially from rest towards the planet from one point to the other.
Calculate the final speed of the rock.
speed = ...................................... m s–1 [2]

© UCLES 2009 9702/04/M/J/09
5
2 Sources of α-particles are frequently found to contain traces of helium gas. For
A radioactive source emits α-particles at a constant rate of 3.5 × 106 s–1. The α-particles are Examiner’s
collected for a period of 40 days. Each α-particle becomes one helium atom. Use
(a) By reference to the half-life of the source, suggest why it may be assumed that the rate
of emission of α-particles is constant.
..........................................................................................................................................
.................................................................................................................................... [1]
(b) The helium gas may be assumed to be an ideal gas. Calculate the volume of gas that is
collected at a pressure of 1.5 × 105 Pa and at a temperature of 17 °C.
volume = ......................................... m3 [3]
6
3 When a liquid is boiling, thermal energy must be supplied in order to maintain a constant For
temperature. Examiner’s
Use
(a) State two processes for which thermal energy is required during boiling.
1. .....................................................................................................................................
..........................................................................................................................................
2. .....................................................................................................................................
..........................................................................................................................................
[2]
(b) A student carries out an experiment to determine the specific latent heat of vaporisation
of a liquid.
Some liquid in a beaker is heated electrically as shown in Fig. 3.1.
to electrical
circuit
heater
liquid
Fig. 3.1
Energy is supplied at a constant rate to the heater. When the liquid is boiling at a constant
rate, the mass of liquid evaporated in 5.0 minutes is measured.
The power of the heater is then changed and the procedure is repeated.
Data for the two power ratings are given in Fig. 3.2.
power of heater mass evaporated in 5.0 minutes

/W /g
50.0 6.5
70.0 13.6
Fig. 3.2
© UCLES 2009 9702/04/M/J/09
7
(i) Suggest For

Examiner’s
1. how it may be checked that the liquid is boiling at a constant rate, Use
..................................................................................................................................
............................................................................................................................ [1]
2. why the rate of evaporation is determined for two different power ratings.
..................................................................................................................................
............................................................................................................................ [1]
(ii) Calculate the specific latent heat of vaporisation of the liquid.
specific latent heat of vaporisation = ....................................... J g–1 [3]
8
4 A vertical peg is attached to the edge of a horizontal disc of radius r, as shown in Fig. 4.1. For
Examiner’s
Use
peg
disc
Fig. 4.1
The disc rotates at constant angular speed ω. A horizontal beam of parallel light produces a
shadow of the peg on a screen, as shown in Fig. 4.2.
screen
peg
R
Q
parallel beam θ
S
of light P
r
Fig. 4.2 (plan view)
At time zero, the peg is at P, producing a shadow on the screen at S.

At time t, the disc has rotated through angle θ. The peg is now at R, producing a shadow
at Q.
(a) Determine,
(i) in terms of ω and t, the angle θ,
............................................................................................................................ [1]
(ii) in terms of ω, t and r, the distance SQ.
............................................................................................................................ [1]
© UCLES 2009 9702/04/M/J/09
9
(b) Use your answer to (a)(ii) to show that the shadow on the screen performs simple For
harmonic motion. Examiner’s
Use
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [2]
(c) The disc has radius r of 12 cm and is rotating with angular speed ω of 4.7 rad s–1.
Determine, for the shadow on the screen,
(i) the frequency of oscillation,
frequency = ......................................... Hz [2]
(ii) its maximum speed.
speed = .................................... cm s–1 [2]
10
5 A solid metal sphere, of radius r, is insulated from its surroundings. The sphere has For
charge +Q. Examiner’s
This charge is on the surface of the sphere but it may be considered to be a point charge at Use
its centre, as illustrated in Fig. 5.1.
+Q
Fig. 5.1
(a) (i) Define capacitance.
..................................................................................................................................
............................................................................................................................ [1]
(ii) Show that the capacitance C of the sphere is given by the expression
C = 4πε0r.
[1]
(b) The sphere has radius 36 cm.

Determine, for this sphere,
(i) the capacitance,
capacitance = ............................................ F [1]
© UCLES 2009 9702/04/M/J/09
11
(ii) the charge required to raise the potential of the sphere from zero to 7.0 × 105 V. For
Examiner’s
Use
charge = ........................................... C [1]
(c) Suggest why your calculations in (b) for the metal sphere would not apply to a plastic
sphere.
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [3]
(d) A spark suddenly connects the metal sphere in (b) to the Earth, causing the potential of
the sphere to be reduced from 7.0 × 105 V to 2.5 × 105 V.
Calculate the energy dissipated in the spark.
energy = ............................................ J [3]
12
6 (a) Define the tesla. For

Examiner’s
.......................................................................................................................................... Use
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [3]
(b) A large horseshoe magnet produces a uniform magnetic field of flux density B between
its poles. Outside the region of the poles, the flux density is zero.
The magnet is placed on a top-pan balance and a stiff wire XY is situated between its
poles, as shown in Fig. 6.1.
Y
pole P
magnet
top-pan
balance
Fig. 6.1
The wire XY is horizontal and normal to the magnetic field. The length of wire between
the poles is 4.4 cm.
A direct current of magnitude 2.6 A is passed through the wire in the direction from X
to Y.
The reading on the top-pan balance increases by 2.3 g.
(i) State and explain the polarity of the pole P of the magnet.
..................................................................................................................................
..................................................................................................................................
..................................................................................................................................
............................................................................................................................ [3]
© UCLES 2009 9702/04/M/J/09
13
(ii) Calculate the flux density between the poles. For

Examiner’s
Use
flux density = ............................................ T [3]
(c) The direct current in (b) is now replaced by a very low frequency sinusoidal current of
r.m.s. value 2.6 A.
Calculate the variation in the reading of the top-pan balance.
variation in reading = ............................................ g [2]
14
7 You are provided with a coil of wire, a bar magnet and a sensitive ammeter. For
Examiner’s
Outline an experiment to verify Lenz’s law. Use
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................
........................................................................................................................................... [6]
© UCLES 2009 9702/04/M/J/09
15
8 (a) Explain why, for the photoelectric effect, the existence of a threshold frequency and a For
very short emission time provide evidence for the particulate nature of electromagnetic Examiner’s
radiation, as opposed to a wave theory. Use
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [4]
(b) State and explain two relations in which the Planck constant h is the constant of
proportionality.
1. .....................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
2. .....................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
[6]
16
9 (a) A sample of a radioactive isotope contains N nuclei at time t. At time (t + Δt), it contains For
(N – ΔN) nuclei of the isotope. Examiner’s
Use
For the period Δt, state, in terms of N, ΔN and Δt,
(i) the mean activity of the sample,
activity = ............................................... [1]
(ii) the probability of decay of a nucleus.
probability = ............................................... [1]
(b) A cobalt-60 source having a half-life of 5.27 years is calibrated and found to have an
activity of 3.50 × 105 Bq. The uncertainty in the calibration is ±2%.
Calculate the length of time, in days, after the calibration has been made, for the stated
activity of 3.50 × 105 Bq to have a maximum possible error of 10%.
time = ...................................... days [4]
© UCLES 2009 9702/04/M/J/09
17
Section B For
Examiner’s
Answer all the questions in the spaces provided. Use
10 (a) By reference to an amplifier, explain what is meant by negative feedback.
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [2]
(b) An amplifier circuit incorporating an ideal operational amplifier (op-amp) is shown in

Fig. 10.1.
–
+
V IN 120 kΩ V OUT
R
Fig. 10.1
The supply for the op-amp is ± 9.0 V.

The amplifier circuit is to have a gain of 25.
Calculate the resistance of resistor R.
resistance = ........................................... Ω [2]
(c) State the value of the output voltage VOUT of the amplifier in (b) for input voltages VIN of
(i) – 0.08 V,
VOUT = ............................................ V [1]
(ii) +0.4 V.
VOUT = ............................................ V [1]

18
11 (a) Explain the main principles behind the use of ultrasound to obtain diagnostic information For
about internal body structures. Examiner’s
Use
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [4]
(b) Data for the acoustic impedances and absorption (attenuation) coefficients of muscle
and bone are given in Fig. 11.1.
acoustic impedance absorption coefficient

/ kg m–2 s–1 / m–1
muscle 1.7 × 106 23

bone 6.3 × 106 130
Fig. 11.1
The intensity reflection coefficient is given by the expression
(Z2 – Z1)2
.
(Z2 + Z1)2
The attenuation of ultrasound in muscle follows a similar relation to the attenuation of

X-rays in matter.
A parallel beam of ultrasound of intensity I enters the surface of a layer of muscle of

thickness 4.1 cm as shown in Fig. 11.2.
muscle bone
beam of
ultrasound
4.1 cm
Fig. 11.2
© UCLES 2009 9702/04/M/J/09
19
The ultrasound is reflected at a muscle-bone boundary and returns to the surface of the For
muscle. Examiner’s
Use
Calculate
(i) the intensity reflection coefficient at the muscle-bone boundary,
coefficient = ............................................... [2]
(ii) the fraction of the incident intensity that is transmitted from the surface of the muscle
to the surface of the bone,
fraction = ............................................... [2]
(iii) the intensity, in terms of I, that is received back at the surface of the muscle.
intensity = ............................................ I [2]
20
12 A signal is to be transmitted along a cable system of total length 125 km. For
The cable has an attenuation of 7 dB km–1. Amplifiers, each having a gain of 43 dB, are placed Examiner’s
at 6 km intervals along the cable, as illustrated in Fig. 12.1. Use
6 km 6 km amplifier 6 km
gain 43 dB
input output
signal signal
450 mW
125 km
Fig. 12.1
(a) State what is meant by the attenuation of a signal.
..........................................................................................................................................
.................................................................................................................................... [1]
(b) Calculate
(i) the total attenuation caused by the transmission of the signal along the cable,
attenuation = ......................................... dB [1]
(ii) the total signal gain as a result of amplification by all of the amplifiers along the
cable.
gain = ......................................... dB [1]
© UCLES 2009 9702/04/M/J/09
21
(c) The input signal has a power of 450 mW. Use your answers in (b) to calculate the output For
power of the signal as it leaves the cable system. Examiner’s
Use
power = ....................................... mW [3]
22
13 (a) Fig. 13.1 is a block diagram illustrating part of a mobile phone handset used for receiving For
a signal from a base station. Examiner’s
Use
switch
DAC
Fig. 13.1
Complete Fig. 13.1 by labelling each of the blocks. [4]
(b) Explain the role of the base station and the cellular exchange when a mobile phone is
switched on and before a call is made or received.
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
.................................................................................................................................... [4]
© UCLES 2009 9702/04/M/J/09
23
BLANK PAGE
9702/04/M/J/09
24
BLANK PAGE
Permission to reproduce items where third-party owned material protected by copyright is included has been sought and cleared where possible. Every
reasonable effort has been made by the publisher (UCLES) to trace copyright holders, but if any items requiring clearance have unwittingly been included, the
publisher will be pleased to make amends at the earliest possible opportunity.
University of Cambridge International Examinations is part of the Cambridge Assessment Group. Cambridge Assessment is the brand name of University of
Cambridge Local Examinations Syndicate (UCLES), which is itself a department of the University of Cambridge.
9702/04/M/J/09

9702 s09 QP 4 PDF

Uploaded by

Copyright:

Available Formats

9702 s09 QP 4 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9702 s09 QP 4 PDF

Uploaded by

Copyright:

Available Formats

UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS

General Certificate of Education Advanced Level

READ THESE INSTRUCTIONS FIRST

This document consists of 22 printed pages and 2 blank pages.

speed of light in free space, c = 3.00 × 10 8 m s –1

permeability of free space, ␮0 = 4π × 10 –7 H m–1

permittivity of free space, ε0 = 8.85 × 10 –12 F m–1

elementary charge, e = 1.60 × 10 –19 C

the Planck constant, h = 6.63 × 10 –34 J s

unified atomic mass constant, u = 1.66 × 10 –27 kg

rest mass of electron, me = 9.11 × 10 –31 kg

rest mass of proton, mp = 1.67 × 10 –27 kg

molar gas constant, R = 8.31 J K –1 mol –1

the Avogadro constant, NA = 6.02 × 10 23 mol –1

the Boltzmann constant, k = 1.38 × 10 –23 J K –1

gravitational constant, G = 6.67 × 10 –11 N m 2 kg –2

acceleration of free fall, g = 9.81 m s –2

© UCLES 2009 9702/04/M/J/09

uniformly accelerated motion, s = ut + at 2

work done on/by a gas, W = p⌬V

simple harmonic motion, a = – ω 2x

velocity of particle in s.h.m., v = v0 cos ωt

energy of charged capacitor, W = QV

resistors in parallel, 1/R = 1/R1 + 1/R2 + . . .

alternating current/voltage, x = x0 sin ωt

radioactive decay, x = x0 exp(– λt )

© UCLES 2009 9702/04/M/J/09 [Turn over

1 (a) Define gravitational field strength.

mass = .......................................... kg [3]

speed = ...................................... m s–1 [2]

volume = ......................................... m3 [3]

© UCLES 2009 9702/04/M/J/09 [Turn over

power of heater mass evaporated in 5.0 minutes

© UCLES 2009 9702/04/M/J/09

(i) Suggest For

(ii) Calculate the specific latent heat of vaporisation of the liquid.

specific latent heat of vaporisation = ....................................... J g–1 [3]

© UCLES 2009 9702/04/M/J/09 [Turn over

Fig. 4.2 (plan view)

At time zero, the peg is at P, producing a shadow on the screen at S.

(i) in terms of ω and t, the angle θ,

(ii) in terms of ω, t and r, the distance SQ.

© UCLES 2009 9702/04/M/J/09

Determine, for the shadow on the screen,

(i) the frequency of oscillation,

frequency = ......................................... Hz [2]

(ii) its maximum speed.

speed = .................................... cm s–1 [2]

© UCLES 2009 9702/04/M/J/09 [Turn over

its centre, as illustrated in Fig. 5.1.

(a) (i) Define capacitance.

(b) The sphere has radius 36 cm.

(i) the capacitance,

capacitance = ............................................ F [1]

© UCLES 2009 9702/04/M/J/09

charge = ........................................... C [1]

Calculate the energy dissipated in the spark.

energy = ............................................ J [3]

© UCLES 2009 9702/04/M/J/09 [Turn over