9702 s16 QP 42 PDF

Cambridge International Examinations
Cambridge International Advanced Subsidiary and Advanced Level

* 7 6 2 2 8 7 4 4 8 6 *
PHYSICS 9702/42
Paper 4 A Level Structured Questions May/June 2016
2 hours
Candidates answer on the Question Paper.
No Additional Materials are required.
READ THESE INSTRUCTIONS FIRST
Write your Centre number, candidate number and name on all the work you hand in.
Write in dark blue or black pen.
You may use an HB pencil for any diagrams or graphs.
Do not use staples, paper clips, glue or correction fluid.
DO NOT WRITE IN ANY BARCODES.
Answer all questions.
Electronic calculators may be used.

You may lose marks if you do not show your working or if you do not use appropriate units.
At the end of the examination, fasten all your work securely together.
The number of marks is given in brackets [ ] at the end of each question or part question.
This document consists of 27 printed pages and 1 blank page.
DC (NF/FD) 108407/3
© UCLES 2016 [Turn over
2
Data
speed of light in free space c = 3.00 × 108 m s−1
permeability of free space μ0 = 4π × 10−7 H m−1
permittivity of free space ε0 = 8.85 × 10−12 F m−1

1
( = 8.99 × 109 m F−1)
4πε0
elementary charge e = 1.60 × 10−19 C
the Planck constant h = 6.63 × 10−34 J s
unified atomic mass unit 1 u = 1.66 × 10−27 kg
rest mass of electron me = 9.11 × 10−31 kg
rest mass of proton mp = 1.67 × 10−27 kg
molar gas constant R = 8.31 J K−1 mol−1
the Avogadro constant NA = 6.02 × 1023 mol−1
the Boltzmann constant k = 1.38 × 10−23 J K−1
gravitational constant G = 6.67 × 10−11 N m2 kg−2
acceleration of free fall g = 9.81 m s−2
© UCLES 2016 9702/42/M/J/16

3
Formulae
1
uniformly accelerated motion s = ut + 2 at 2
v 2 = u 2 + 2as
work done on/by a gas W = p ΔV
Gm
gravitational potential φ =−
r
hydrostatic pressure p = ρgh
1 Nm 2
pressure of an ideal gas p = 3
〈c 〉
V
simple harmonic motion a = − ω 2x
velocity of particle in s.h.m. v = v0 cos ωt

v = ± ω √⎯(x⎯ 0⎯ 2⎯ –⎯ ⎯ x⎯ 2⎯ )
fsv
Doppler effect fo =
v ± vs
Q
electric potential V =
4πε0r
capacitors in series 1/C = 1/C1 + 1/C2 + . . .
capacitors in parallel C = C1 + C2 + . . .
energy of charged capacitor W = 12 QV
electric current I = Anvq
resistors in series R = R1 + R2 + . . .
resistors in parallel 1/R = 1/R1 + 1/R2 + . . .
BI
Hall voltage VH =
ntq
alternating current/voltage x = x0 sin ω t
radioactive decay x = x0 exp(−λt )
0.693
decay constant λ =
t 1
2
© UCLES 2016 9702/42/M/J/16 [Turn over

4
Answer all the questions in the spaces provided.
1 A binary star consists of two stars A and B that orbit one another, as illustrated in Fig. 1.1.
2.8 × 108 km
t
VWDU$ VWDU%
PDVV0$ 3 PDVV0%
t
G
Fig. 1.1
The stars are in circular orbits with the centres of both orbits at point P, a distance d from the
centre of star A.
(a) (i) Explain why the centripetal force acting on both stars has the same magnitude.
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [2]
(ii) The period of the orbit of the stars about point P is 4.0 years.
Calculate the angular speed ω of the stars.
ω = ............................................. rad s−1 [2]
© UCLES 2016 9702/42/M/J/16

5
(b) The separation of the centres of the stars is 2.8 × 108 km.
The mass of star A is MA. The mass of star B is MB.
M
The ratio A is 3.0.
MB
(i) Determine the distance d.
d = ................................................... km [3]
(ii) Use your answers in (a)(ii) and (b)(i) to determine the mass MB of star B.
Explain your working.
MB = .................................................... kg [3]
[Total: 10]

6
2 (a) State what is meant by
(i) the Avogadro constant NA,
...........................................................................................................................................
...................................................................................................................................... [1]
(ii) the mole.
...........................................................................................................................................
...................................................................................................................................... [2]
(b) A container has a volume of 1.8 × 104 cm3.
The ideal gas in the container has a pressure of 2.0 × 107 Pa at a temperature of 17 °C.
Show that the amount of gas in the cylinder is 150 mol.
[1]
(c) Gas molecules leak from the container in (b) at a constant rate of 1.5 × 1019 s−1.
The temperature remains at 17 °C.
In a time t, the amount of gas in the container is found to be reduced by 5.0%.
Calculate
(i) the pressure of the gas after the time t,
pressure = ................................................... Pa [2]
© UCLES 2016 9702/42/M/J/16

7
(ii) the time t.
t = ....................................................... s [3]
[Total: 9]
3 (a) Explain what is meant by the statement that two bodies are in thermal equilibrium.
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [1]
(b) Suggest suitable types of thermometer, one in each case, to measure
(i) the temperature of the flame of a Bunsen burner,
...................................................................................................................................... [1]
(ii) the change in temperature of a small crystal when it is exposed to a pulse of ultrasound
energy.
...................................................................................................................................... [1]
(c) Some water is heated so that its temperature changes from 26.5 °C to a final temperature of
38.0 °C.
State, to an appropriate number of decimal places,
(i) the change in temperature in kelvin,
change = ..................................................... K [1]
(ii) the final temperature in kelvin.
final temperature = ..................................................... K [1]
[Total: 5]

8
4 A metal block hangs vertically from one end of a spring. The other end of the spring is tied to a
thread that passes over a pulley and is attached to a vibrator, as shown in Fig. 4.1.
pulley vibrator
spring
block
Fig. 4.1
(a) The vibrator is switched off.

The metal block of mass 120 g is displaced vertically and then released. The variation with
time t of the displacement y of the block from its equilibrium position is shown in Fig. 4.2.
y / cm 2
0
0 0.2 0.4 0.6 0.8 1.0
–1 W /s
–2
–3
Fig. 4.2
For the vibrations of the block, calculate
(i) the angular frequency ω,
ω = ............................................. rad s−1 [2]

© UCLES 2016 9702/42/M/J/16
9
(ii) the energy of the vibrations.
energy = ...................................................... J [2]
(b) The vibrator is now switched on.
The frequency of vibration is varied from 0.7f to 1.3f where f is the frequency of vibration of
the block in (a).
For the block, complete Fig. 4.3 to show the variation with frequency of the amplitude of
vibration. Label this line A. [3]
amplitude
0
0.7I I 1.3I
frequency
Fig. 4.3
(c) Some light feathers are now attached to the block in (b) to increase air resistance.
The frequency of vibration is once again varied from 0.7f to 1.3f. The new amplitude of
vibration is measured for each frequency.
On Fig. 4.3, draw a line to show the variation with frequency of the amplitude of vibration.
Label this line B. [2]
[Total: 9]

10
5 The signal from a radio station is amplitude modulated.
(a) State what is meant by amplitude modulation (AM).
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [2]
(b) The variation with frequency of the intensity of the signal from the radio station is shown in
Fig. 5.1.
intensity
0
193 198 203
frequency / kHz
Fig. 5.1
State, for this signal,
(i) the bandwidth,
bandwidth = ................................................. kHz [1]
(ii) the maximum audio frequency that is broadcast.
maximum frequency = ................................................. kHz [1]
© UCLES 2016 9702/42/M/J/16

11
(c) A transmission line of length 45 km has an attenuation per unit length of 2.0 dB km−1.
The input power to the transmission line is 500 mW.

The minimum acceptable signal-to-noise ratio is 24 dB for background noise of 5.0 × 10−13 W.
(i) Calculate the minimum acceptable power output from the transmission line.
power = .................................................... W [2]
(ii) Use your answer in (i) to determine whether it is possible to transmit the signal along the
transmission line.
[2]
[Total: 8]

12
BLANK PAGE
© UCLES 2016 9702/42/M/J/16

13
6 (a) By reference to electric field lines, explain why, for points outside an isolated spherical
conductor, the charge on the sphere may be considered to act as a point charge at its centre.
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [2]
(b) Two isolated protons are separated in a vacuum by a distance x.
(i) Calculate the ratio
electric force between the two protons

.
gravitational force between the two protons
ratio = ......................................................... [3]
(ii) By reference to your answer in (i), suggest why gravitational forces are not considered
when calculating the force between charged particles.
...........................................................................................................................................
...................................................................................................................................... [1]
[Total: 6]

14
7 (a) State two uses of capacitors in electrical circuits, other than for the smoothing of direct current.
1. ..............................................................................................................................................
2. ..............................................................................................................................................
[2]
(b) The combined capacitance between terminals A and B of the arrangement shown in Fig. 7.1
is 4.0 μF.
+F
& &
A B
+F
Fig. 7.1
Two capacitors each have capacitance C and the remaining capacitors each have
capacitance 3.0 μF.
The potential difference (p.d.) between terminals A and B is 12 V.
(i) Determine the capacitance C.
C = ................................................... μF [2]
(ii) Calculate the magnitude of the total positive charge transferred to the arrangement.
charge = ................................................... μC [2]
© UCLES 2016 9702/42/M/J/16

15
(iii) Use your answer in (ii) to state the magnitude of the charge on one plate of
1. a capacitor of capacitance C,
charge = ......................................................... μC
2. a capacitor of capacitance 3.0 μF.
charge = ......................................................... μC
[2]
[Total: 8]

16
8 An ideal operational amplifier (op-amp) has infinite voltage gain and infinite slew rate.
(a) State what is meant by
(i) the voltage gain,
...........................................................................................................................................
...................................................................................................................................... [1]
(ii) infinite slew rate.
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [2]
(b) A non-inverting amplifier circuit incorporating an ideal op-amp is shown in Fig. 8.1.
9
–
²9
9,1 N1 9287
Fig. 8.1
The supply to the op-amp is +9 V / −9 V.

The voltage gain of the amplifier circuit is 12.
Determine the resistance of resistor R.
resistance = ..................................................... Ω [2]
© UCLES 2016 9702/42/M/J/16

17
(c) For the circuit of Fig. 8.1, the variation with time t of the input potential VIN to the amplifier is
shown in Fig. 8.2.
1.0
9IN / V
0.5
0
W W W
–0.5
–1.0
Fig. 8.2
On Fig. 8.3, show the variation with time t of the output potential VOUT for time t = 0 to time
t = t2.
15
9OUT / V
10
0
W W W
–5
–10
–15
Fig. 8.3
[4]
[Total: 9]

18
9 A magnetic field of flux density B is normal to face PQRS of a slice of a conducting material, as
shown in Fig. 9.1.
magnetic field
flux density %
S
R
Z FXUUHQWI
P Q
X Y
Fig. 9.1
A current I in the slice is normal to face QRZY of the slice.
The Hall voltage VH across the slice is given by the expression
BI
VH = .
ntq
(a) (i) State what is represented by the symbol n.
...........................................................................................................................................
...................................................................................................................................... [1]
(ii) The symbol t represents the length of one side of the slice. Use letters from Fig. 9.1 to
identify t.
...................................................................................................................................... [1]
(b) (i) In general, the Hall voltage produced in a slice of a metal is very small.
For a slice of the same dimensions with the same current and magnetic flux density, the
Hall voltage produced in a semiconductor material is much larger.
Suggest and explain why.
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [2]
© UCLES 2016 9702/42/M/J/16

19
(ii) In some semiconducting materials, electrons are mainly responsible for conduction.
In other semiconducting materials, holes are mainly responsible for conduction.
Suggest and explain the difference, if any, that conduction by electrons or by holes will
have on the Hall voltage.
...........................................................................................................................................
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [3]
[Total: 7]

20
10 Two coils P and Q are placed close to one another, as shown in Fig. 10.1.
coil P coil Q
V
power
supply
Fig. 10.1
(a) The current in coil P is constant.
An iron rod is inserted into coil P.
Explain why, during the time that the rod is moving, there is a reading on the voltmeter
connected to coil Q.
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [2]
© UCLES 2016 9702/42/M/J/16

21
(b) The current in coil P is now varied as shown in Fig. 10.2.
current
0
0 W1 W2 WLPH
Fig. 10.2
On Fig. 10.3, show the variation with time of the reading of the voltmeter connected to coil Q
for time t = 0 to time t = t2.
voltmeter
reading
0
0 W1 W2 time
Fig. 10.3 [4]
[Total: 6]

22
11 A bridge rectifier contains four ideal diodes A, B, C and D, as shown in Fig. 11.1.
input $
9
' & / N 1
Fig. 11.1
The output of the rectifier is connected to a load L of resistance 2.4 kΩ.
(a) On Fig. 11.1, mark with the letter P the positive terminal of the load. [1]
(b) The variation with time t of the potential difference V across the input to the rectifier is shown
in Fig. 11.2.
6 LQSXW
9/V
4
0
W
–2
–4
–6
–8
Fig. 11.2
Calculate the root-mean-square (r.m.s.) current in the load L.
r.m.s. current = ..................................................... A [2]

© UCLES 2016 9702/42/M/J/16
23
(c) The potential difference across the load L is to be smoothed using a capacitor.
(i) On Fig. 11.1, draw the symbol for a capacitor, connected to produce smoothing. [1]
(ii) The minimum potential difference across the load L with the smoothing capacitor
connected is 3.0 V.
On Fig. 11.2, sketch the variation with time t of the potential difference across the load L.
[3]
[Total: 7]

24
12 High-energy electrons collide with a metal target, producing X-ray photons.
The variation with wavelength of the intensity of the X-ray beam is illustrated in Fig. 12.1.
intensity
0
wavelength
Fig. 12.1
(a) Explain why there is
(i) a continuous distribution of wavelengths,
...........................................................................................................................................
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [3]
(ii) a sharp cut-off at short wavelength,
...........................................................................................................................................
...........................................................................................................................................
...................................................................................................................................... [2]
(iii) a series of peaks superimposed on the continuous distribution of wavelengths.
...........................................................................................................................................
...................................................................................................................................... [1]
(b) In the X-ray imaging of body structures, longer wavelength photons are frequently filtered out
of the X-ray beam.
(i) State how this filtering is achieved.
...........................................................................................................................................
...................................................................................................................................... [1]
© UCLES 2016 9702/42/M/J/16

25
(ii) Suggest the reason for this filtering.
...........................................................................................................................................
...................................................................................................................................... [1]
[Total: 8]

26
13 (a) Explain what is meant by gamma radiation (γ-radiation).
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [2]
(b) A source of gamma radiation is placed a fixed distance away from a detector and counter, as
illustrated in Fig. 13.1.
WRFRXQWHU
GHWHFWRU
OHDGVKHHW
[
VKLHOGLQJ VRXUFH
Fig. 13.1
A sheet of lead of thickness x is placed between the source and the detector.
The average count rate C, corrected for background, is recorded. This is repeated for different
values of x.
The variation with thickness x of ln C is shown in Fig. 13.2.
© UCLES 2016 9702/42/M/J/16

27
4.00
3.75
ln (& / s–1)
3.50
3.25
3.00
2.75
0 2 4 6 8 10 12 14 16
[ / mm
Fig. 13.2
The absorption of gamma radiation in lead may be represented by the equation
C = C0 e−μx
where C0 is the count rate for x = 0 and μ is the linear attenuation (absorption) coefficient.
Use Fig. 13.2 to determine the linear attenuation coefficient μ for this gamma radiation in lead.
μ = .............................................. mm−1 [4]
Question 13 continues on the next page.

28
(c) The value of μ calculated in (b) is for gamma radiation in lead.
Suggest and explain whether the value of μ for aluminium would be the same, greater or
smaller.
...................................................................................................................................................
...................................................................................................................................................
.............................................................................................................................................. [2]
[Total: 8]
Permission to reproduce items where third-party owned material protected by copyright is included has been sought and cleared where possible. Every reasonable
effort has been made by the publisher (UCLES) to trace copyright holders, but if any items requiring clearance have unwittingly been included, the publisher will
be pleased to make amends at the earliest possible opportunity.
To avoid the issue of disclosure of answer-related information to candidates, all copyright acknowledgements are reproduced online in the Cambridge International
Examinations Copyright Acknowledgements Booklet. This is produced for each series of examinations and is freely available to download at www.cie.org.uk after
the live examination series.
Cambridge International Examinations is part of the Cambridge Assessment Group. Cambridge Assessment is the brand name of University of Cambridge Local
Examinations Syndicate (UCLES), which is itself a department of the University of Cambridge.
© UCLES 2016 9702/42/M/J/16

9702 s16 QP 42 PDF

Uploaded by

Copyright:

Available Formats

9702 s16 QP 42 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9702 s16 QP 42 PDF

Uploaded by

Copyright:

Available Formats

Cambridge International Examinations

Cambridge International Advanced Subsidiary and Advanced Level

READ THESE INSTRUCTIONS FIRST

Answer all questions.

Electronic calculators may be used.

This document consists of 27 printed pages and 1 blank page.

speed of light in free space c = 3.00 × 108 m s−1

permeability of free space μ0 = 4π × 10−7 H m−1

permittivity of free space ε0 = 8.85 × 10−12 F m−1

the Planck constant h = 6.63 × 10−34 J s

unified atomic mass unit 1 u = 1.66 × 10−27 kg

rest mass of electron me = 9.11 × 10−31 kg

rest mass of proton mp = 1.67 × 10−27 kg

molar gas constant R = 8.31 J K−1 mol−1

the Avogadro constant NA = 6.02 × 1023 mol−1

the Boltzmann constant k = 1.38 × 10−23 J K−1

gravitational constant G = 6.67 × 10−11 N m2 kg−2

acceleration of free fall g = 9.81 m s−2

© UCLES 2016 9702/42/M/J/16

work done on/by a gas W = p ΔV

hydrostatic pressure p = ρgh

velocity of particle in s.h.m. v = v0 cos ωt

capacitors in series 1/C = 1/C1 + 1/C2 + . . .

energy of charged capacitor W = 12 QV

electric current I = Anvq

resistors in parallel 1/R = 1/R1 + 1/R2 + . . .

alternating current/voltage x = x0 sin ω t

radioactive decay x = x0 exp(−λt )

© UCLES 2016 9702/42/M/J/16 [Turn over

Answer all the questions in the spaces provided.

Calculate the angular speed ω of the stars.

ω = ............................................. rad s−1 [2]

© UCLES 2016 9702/42/M/J/16

(i) Determine the distance d.

© UCLES 2016 9702/42/M/J/16 [Turn over

2 (a) State what is meant by

(i) the Avogadro constant NA,

(ii) the mole.

(b) A container has a volume of 1.8 × 104 cm3.

Show that the amount of gas in the cylinder is 150 mol.

(i) the pressure of the gas after the time t,

pressure = ................................................... Pa [2]

© UCLES 2016 9702/42/M/J/16

(ii) the time t.

(b) Suggest suitable types of thermometer, one in each case, to measure

(i) the temperature of the flame of a Bunsen burner,

State, to an appropriate number of decimal places,

(i) the change in temperature in kelvin,

change = ..................................................... K [1]

(ii) the final temperature in kelvin.

final temperature = ..................................................... K [1]

© UCLES 2016 9702/42/M/J/16 [Turn over

(a) The vibrator is switched off.

For the vibrations of the block, calculate

(i) the angular frequency ω,

ω = ............................................. rad s−1 [2]

(ii) the energy of the vibrations.

energy = ...................................................... J [2]

(b) The vibrator is now switched on.