Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 644 views

    00 Initial Steps For Setting Up Actix For GNG B

    Uploaded by

    Fad Kassem
    The document provides guidelines for initial setup and creating a GNG report in Actix. It outlines the following key steps: 1. Create map files, cell reference files, network image templates, and repository packages needed for Actix analysis and reporting. 2. Set display thresholds in Actix before running analysis. 3. Create a network image from log files to analyze data and produce plots and a GNG report in Excel. 4. Optional steps include creating an IRAT network image to include additional plots in the report, or running the report using a repository for potentially better GNG results for packet calls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    00 Initial Steps For Setting Up Actix For GNG B

    Uploaded by

    Fad Kassem
    644 views62 pages
    The document provides guidelines for initial setup and creating a GNG report in Actix. It outlines the following key steps: 1. Create map files, cell reference files, network image templates, and repository packages needed for Actix analysis and reporting. 2. Set display thresholds in Actix before running analysis. 3. Create a network image from log files to analyze data and produce plots and a GNG report in Excel. 4. Optional steps include creating an IRAT network image to include additional plots in the report, or running the report using a repository for potentially better GNG results for packet calls.

    Original Title

    00 Initial Steps for Setting Up Actix for GNG B

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides guidelines for initial setup and creating a GNG report in Actix. It outlines the following key steps: 1. Create map files, cell reference files, network image templates, and repository packages needed for Actix analysis and reporting. 2. Set display thresholds in Actix before running analysis. 3. Create a network image from log files to analyze data and produce plots and a GNG report in Excel. 4. Optional steps include creating an IRAT network image to include additional plots in the report, or running the report using a repository for potentially better GNG results for packet calls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    644 views62 pages

    00 Initial Steps For Setting Up Actix For GNG B

    Uploaded by

    Fad Kassem
    The document provides guidelines for initial setup and creating a GNG report in Actix. It outlines the following key steps: 1. Create map files, cell reference files, network image templates, and repository packages needed for Actix analysis and reporting. 2. Set display thresholds in Actix before running analysis. 3. Create a network image from log files to analyze data and produce plots and a GNG report in Excel. 4. Optional steps include creating an IRAT network image to include additional plots in the report, or running the report using a repository for potentially better GNG results for packet calls.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 62

    Actix Setup Guideline

    Initial setup and GNG Report creation


    Introduction
    • The presentation will show all the steps needed to post
    process Agilent data using Actix and create GNG report

    • Explain steps for how to create


    - Mapinfo Cluster boundary
    - Celref file
    - Network image from Cingular package
    - Repository from Cingular package
    - GNG report
    - Threshold Settings ( check before running Actix)
    Steps for Setting up Actix Machine
    Create folder
    Step 1. Create folder “MapFiles” on the path below if it doesn’t exist. Update
    CingularProject001 map file with respective market polygon (should have
    cluster ID and can be selected as region). Copy map file in two places:

    C:\Documents and Settings\All Users\Application


    Data\Actix\Analyzer\MapFiles
    C:\Program Files\Actix\Analyzer\MapFiles

    Step 2. Need to put CellRef file for the respective market in the following
    place:

    C:\Documents and Settings\All Users\Application


    Data\Actix\Analyzer\Bin\CellRefs

    Step 3. Make sure that Actix should have the latest Network Image
    Templates and GNG package for GNG, IRAT and Repository in these
    folders:
    Steps for Setting up Actix Machine
    Network Image:

    C:\Program Files\Actix\Analyzer\Packages\ CingularPackage_Nov


    17 2006.apg

    IRAT:
    C:\Documents and Settings\All Users\Application
    Data\Actix\Analyzer\Bin\NetworkImageDefns\
    IRAT_for_PLOTS_NEW.xml

    Repository:
    C:\Program Files\Actix\Analyzer\Packages\ CingularPackage.apg

    C:\Documents and Settings\All Users\Application


    Data\Actix\Analyzer\Packages\CingularPackage.apg
    Steps for Setting up Actix Machine
    Step 4 – Set Display Thresholds
    Steps for Setting up Actix Machine
    Steps for Setting up Actix Machine
    Steps for Setting up Actix Machine

    Should be 5

    Change to 5

    Change to 8000
    Should be 0
    Steps for Setting up Actix Machine

    Change to 3
    Steps for Setting up Actix Machine

    Should be 3
    Step 1 – Setup MapInfo Cluster Boundary
    • To create GNG cluster reports Acitx uses specific mapfiles to
    identify cluster names and boundaries.
    • MapInfo files are stored under the ctc-server/markets/Actix
    Map/Mapfiles. Copy the 5 files named CingularProject001 to
    your local C drive on the Actix machine.

    • Copy market clusters to this master CingularProject001 map


    file. Cluster polygon should be region type with cluster ID
    assigned. Save CingularProject001 in two places:

    C:\Documents and Settings\All Users\Application


    Data\Actix\Analyzer\MapFiles
    C:\Program Files\Actix\Analyzer\MapFiles

    • Actix needs to be restared before these mapfiles are loaded


    Step 2 – Create Cell Ref File

    1. Take TEMS Cell File and delete first line from that file.
    2. Save that file as txt extension.
    3. In Actix, Click on Cells / Network Explorer:
    Step 2 – Create Cell Ref File
    4. Right Click on Network Explorer, click import and click Import
    from New Template.
    Step 2 – Create Cell Ref File
    5. Import saved TXT
    Cell file.

    6. Give Template name


    and click Next.
    Step 2 – Create Cell Ref File
    7. Match all the “Key Sign” and “! Mark” field in WCDMA_Cell from drop down
    menu.
    Step 2 – Create Cell Ref File
    8. Match all the “Key Sign” and “! Mark” field in WCDMA_Site from drop down
    menu.
    Step 2 – Create Cell Ref File
    9. Click Finish

    10. Click yes to the prompt dialogue box.


    Step 2 – Create Cell Ref File
    11. Close Network explorer window and click yes for the prompt dialogue box.
    Step 3 – Create GNG Network image

    1. Click Network Image, click create Network Image.


    Step 3 – Create GNG Network image
    2. Select NetworkImageTemplate___CingularGNG_114,
    and your desired name to the file. When click OK it will ask
    you to save, save on desired location.
    Step 3 – Create GNG Network image

    3. GNG Network Image will appear under Network Image.


    Right Click on it and click Batch load Files.
    Step 3 – Create GNG Network image
    4. Select all log files (with *.sd5) from the folder and click open,
    which will start loading the files.
    Step 3 – Create GNG Network image
    5. When processing is done, check for the Result which should say “OK”
    and then Click OK on the window.
    Create GNG Report using Network image

    1. Click on Workbook and “Workbook____CingularGNG_v1.33(Nov17_06)


    Create GNG Report using Network image
    2. Click “AllStreams” and click OK. Repeat this two more times to get the
    GNG Excel Report. Report will pop up in Excel workbook automatically.
    Create GNG Report using Network image

    The report will not contain IRAT maps at this moment. In order
    to produce IRAT plots another network image for IRAT is needed

    1. Click Network Image, click create Network Image.


    Create GNG Report using Network image
    2. Select IRAT_for_PLOTS_NEW, and your desired name to the
    file. When click OK it will ask you to save, save on desired location.
    Create GNG Report using Network image

    3. IRAT Network Image will appear under Network Images. Right Click on it
    and click Batch load Files.
    Create GNG Report using Network image
    4. Select all log files (*.sd5) from the folder (kit1 and kit2) and click open, which will
    start the loading the files.
    Create GNG Report using Network image
    5. When processing is done, check for the Result which should say “OK”
    and then Click OK on the window.
    Create GNG Report using Repository
    Often times better GNG result is seen for packet calls by
    Running report using Repository instead of network image

    Create repository is explained in steps 1 through 7

    1. Click Repository, click Create Repository.


    Create GNG Report using Repository

    2. Give desired name, select “RT_____CingularGNG_014” template from


    drop down menu (check the latest template if updated). Click “Create & Open”.
    Create GNG Report using Repository

    3. Right click on the created Repository report and click on Load Data
    Create GNG Report using Repository
    4. This window will appear, to load data click Add files
    Create GNG Report using Repository
    5. Select log files (*.sd5) and click open
    Create GNG Report using Repository
    6. Click OK
    Create GNG Report using Repository
    7. When loading files is done, check for the Result which should
    say “OK” and then Click OK on the window.
    Create GNG Report using Repository

    Steps 8 and 9 shows how to create GNG Report using Repository

    8. Right click on “All”, and click on “Cingular GNG Report”


    Create GNG Report using Repository

    9. Double click on Cingular GNG Report.


    Create GNG Report using Repository
    10. Report will appear in html format. Click on Show Excel Report to get the
    Repository Report in excel format.
    Appendix A

    Maps Needed in GNG Report


    Maps Creation for GNG Report
    1. HSDPA Application Layer Plot. Right click on WAMS_FTP_GetRate_0 and select
    option display on Map.
    * Legends for the HSDPA Application Layer
    CL10_GNG_HSDPA attributes-WAMS_FTP_GetRate_0 (bps)
     >= 0 to < 50000 (0)
     >= 50000 to < 300000 (0)
     >= 300000 to < 800000 (193)
     Above 800000 (54)
    2. HSDPA Technology Layer Plot. Select the required filed and drag and drop on
    the map
    3. PS Application Layer Plot. Right click on WAMS_FTP_GetRate_0 and select
    option display on Map.
    4. HSDPA Technology Layer Plot. Select the required filed and drag and drop on
    the map
    5. Same way, plots should be done for MOC and MT Technology Layer.
    6. UMTS Scanner plot RSCP
    7. UMTS Scanner plot Ec/Io
    8. UMTS Scanner plot for RSSI and Too Many servers
    9. IRAT Plots (HSDPA,PS, MOC & MT)

    2
    5
    Appendix B

    How to create Network template


    Introduction
    • It can be very time consuming to load all Actix logfiles for a
    complete drive and then superstream them.

    • If a plot is needed, showing a particular attribute not included in the


    Cingular Network Image, a custom Network Image extracting the
    particular attribute will often prove faster than the superstream
    alternative.

    • These instructions will show how to create a custom Network


    Image extracting the Technology Mode attribute for the MOC and
    MTC UEs which are not included in the Cingular Network Image.

    • Note that a custom Network Image like this is only useful for
    plotting the included attributes (it can NOT be used to create GNG-
    reports) and that all logfiles need to be batched again if attributes
    are changed.
    Device and Filters (explained later)
    • Scanner
    E6458C-100 (GSM/UMTS 850/1900) Receiver {UMTSScanner}

    • CS MOC
    OEM (Qualcomm SURF6275 chipset) phone {GNG1-CSShortMO}

    • CS MTC
    OEM (Qualcomm SURF6275 chipset) phone {GNG1-CSShortMT}

    • PS R99
    OEM (Qualcomm SURF6275 chipset) phone {GNG2-UMTSPSDL}

    • PS HSDPA
    OEM (Qualcomm SURF6275 chipset) phone {GNG1-
    UMHSPSLong}
    Network Image Template Wizard
    • Open the Network Image Template Wizard
    under Network Image in the Actix menu.
    Network Image Template Wizard
    • Another Network Image can be used as input to the new
    but these instructions will show the procedure without
    any input.
    Network Image Template Wizard
    • Enter the device name, e.g. MOC, MTC, PS R99 or PS HSDPA, and a filter
    corresponding to the device. The filter should be a unique string from the
    device name in the logfiles, e.g. CSShortMO, CSShortMT, UMTSPSDL or
    UMHSPSLong, please see slide 3.
    Network Image Template Wizard
    • Add the wanted attributes the each device.
    Network Image Template Wizard
    Network Image Template Wizard
    Network Image Template Wizard
    Create Network Image
    • Save the Network Image Template, e.g. in the default folder and the
    Network Image Template can then be found when creating a new
    Network Image under Network Image in the Actix menu as shown in
    next slide.
    Create Network Image
    • Create a new Network Image as usual and you will be able to plot
    the chosen attributes instead of the superstream all logfiles.

    You might also like