BPVC I p-2
BPVC I p-2
3. Location of Installation Av. Leonardo Da Vinci con Av. Lincoln, C.C. Bello Monte, Piso 4, Ofic. 4-A, Urb. Colinas de Bello Monte, Caracas - Vzla
(Name and address)
4. Type PHT - 150BHP Boiler No. N/A N/A N/A N/A Year Built 2018
(HRT, etc.) (Mfr’s. Serial No.) (CRN) (Drawing No.) (Nat’l Board No.)
5. The chemical and physical properties of all parts meet the requirements of material specifications of the ASME BOILER AND PRESSURE VESSEL
CODE. The design conforms to Section I of the ASME BOILER AND PRESSURE VESSEL CODE 2017 ,
(Year)
Manufacturer’s Partial Data Reports properly identified and signed by Commissioned Inspectors are attached for the following items of this report:
N/A
(Name of part, item number, mfr’s. name and identifying Certification Mark)
9. Tubesheet SA 516 GR. 70 - THCK 0.625" Tube Holes 86 HOLES, 3,1" DIAMETER
(Mat’l. Spec., Grade, Thickness) (Diameter)
11. Furnace No. Size 34,25" Length, each section 146" Total
(O.D. or WxH)
Type CORRUGATED
(Plain, Adamson, Ring Reinforced, Corrugated, Combined, or Stayed)
SA 516 GR. 70 Seams: Type WELDED
(Mat’l. Spec., Grade, Thickness) (Seamless, Welded)
12. Staybolts: No. Size 1,5"
(Diameter, Mat’l. Spec., Grade, Size Telltale, Net Area)
(07/15)
FORM P-2
Mfr’s. Serial No. N/A CRN N/A National Board No. N/A
15. Openings: (a) Steam 3" FLANGED (b) Pressure Relief Valve 1 1/2" FULL COUPLING
(No., Size, and Type) (No., Size, and Type)
(c) Blowoff 1" FULL COUPLING (d) Feed 1 1/4" FULL COUPLING
(No., Size, Type, and Location) (No., Size, Type, and Location)
(f) Handholes: No. Size 4" x 5" Location TOP - BOTTOM AND SIDES
19. Shop Hydrostatic Test 250 PSIG 20. Maximum Designed Steaming Capacity 5300 lb/h
21. Remarks
have compared statements in this Manufacturer’s Data Report with the described boiler and state that the parts referred to as data items
, not included in the certificate of shop inspection, have been inspected by me and that, to the best of my knowledge and
belief, the manufacturer and/or the assembler has constructed and assembled this boiler in accordance with the applicable sections of the ASME
BOILER AND PRESSURE VESSEL CODE. The described boiler was inspected and subjected to a hydrostatic test of .
By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concerning the boiler described in
this Manufacturer’s Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or
property damage or a loss of any kind arising from or connected with this inspection.
(07/17)