Siprotec 7ut85 Profile

SIPROTEC 7UT85
Transformer Differential Protection
www.siemens.com/siprotec
Description
The SIPROTEC 7UT85 transformer differential protection
device has been designed specifically for the protection of
two-winding transformers (2 sides). It is the main protec-
tion for the transformer and contains many other protec-
tion and monitoring functions. The additional protection
functions can also be used as backup protection for pro-
tected downstream objects (such as cables or lines). In this
regard you are also supported by the modular expandabil-
ity of the hardware. With its modular structure, flexibility
and the powerful DIGSI 5 engineering tool, SIPROTEC
7UT85 offers future-oriented system solutions with high
investment security and low operating costs.
SIPROTEC 7UT85
Main function 1 differential protection function (standard or
auto transformer) with additional stabiliza-
tion; up to 2 restricted ground-fault protection • Transformer differential protection for phase-angle
functions regulating transformers of the single core type and
Usable measur- 5 x 3-phase current measuring points, special transformers
ing 3 x 1-phase current measuring points,
• Applicable from average up to extra-high voltage
points 3 x 3-phase voltage measuring points;
expandable to 3 sides • Protection of standard power transformers, auto
Inputs and 2 predefined standard variants with transformers and motors
outputs 8 current transformers, 7 to 19 binary • Typical properties of a transformer differential protec-
inputs, 7 to 23 binary outputs tion such as flexible adaptation to the transformer
Hardware Flexibly adjustable and expandable vector group, control of inrush and overexcitation
flexibility I/O quantity structure within the scope processes, safe behavior in the case of current-
of the SIPROTEC 5 modular system transformer saturation with different degrees of
Housing width 1/3 × 19 inch to 2/1 × 19 inch saturation
• Adaptive adaptation of the operate curve to the
Functions transformer tap position
DIGSI 5 permits all functions to be configured and com-
bined as required. • Increased sensitivity with near-neutral-point ground
faults through a separate restricted ground-fault
• Transformer differential protection for two-winding protection
transformers with versatile, additional protection
functions; expandable to 3 windings • Additional current and voltage inputs can be supple-
ments for standard protection functions, such as
overcurrent, voltage frequency and others
Modular and flexible
• Arc protection Benefits

• Voltage controller function ANSI 90V for two-winding • Safety due to powerful protection functions
transformers, three-winding transformers and grid
coupling transformers with parallel control • Data security and transparency over the entire
(master/follower, circuit reactive current lifecycle of the plant save time and money
minimization) • Purposeful and simple operation of the devices and
• Graphical logic editor to create powerful automation software thanks to user-friendly design
functions in the device • Increased reliability and quality of the engineering
• Up to 4 pluggable communication modules, usable for process
different and redundant protocols (IEC 61850, • High safety due to a consistent implementation of
IEC 60870-5-103, IEC 60870-5-104, DNP3 serial and safety and security
TCP, Modbus TCP, PROFINET IO)
• Powerful communication components ensure safe
• Redundancy protocols PRP and HSR and effective solutions
• Cyber security to NERC CIP and BDWE Whitepaper • Full compatibility between IEC 61850 Editions 1 and 2
requirements
• Highly available Ethernet communication due to inte-
• Secure serial protection data communication, even grated Ethernet redundancy protocols PRP and HSR
over great distances and all available physical media
(optical fiber cable, 2-wire connections and
communication networks)
• Capturing operational measured variables and protec-
tion function measured values to evaluate the plant
state, to support commissioning, and to analyze faults
• Phasor measurement unit (PMU) for synchrophasor
measured values and IEEE C37.118 protocol
• Powerful fault recording (buffer for a max. record
time of 80 sec. at 8 kHz or 320 sec. at 2 kHz)
• Auxiliary functions for simple tests and
commissioning
• Flexibly adjustable I/O quantity structure within the
scope of the SIPROTEC 5 modular system
For all products using

security features of
OpenSSL, the
Siemens AG following shall apply:
Energy Management Division This product includes
Freyeslebenstraße 1 software developed
91058 Erlangen, Germany by the OpenSSL
Project for use in the
SIPROTEC 7UT85 Profile E7.5.docx OpenSSL Toolkit
(www.openssl.org),
Printed in Germany | © 09.17 Siemens AG cryptographic soft-
ware written by Eric
E-Mail: support.energy@siemens.com Young
Tel: +49 180 524 70 00 (eay@cryptsoft.com)
and software devel-
oped by Bodo
Moeller.

Siprotec 7ut85 Profile

Uploaded by

Copyright:

Available Formats

Siprotec 7ut85 Profile

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Siprotec 7ut85 Profile

Uploaded by

Copyright:

Available Formats

SIPROTEC 7UT85

Transformer Differential Protection

• Arc protection Benefits

For all products using

You might also like