2576 L

DATA SHEET
SE2576L: 2.4 GHz High Power Wireless LAN Power Amplifier

Preliminary
Applications Product Description

 IEEE802.11b DSSS WLAN The SE2576L is a high power 802.11bgn WLAN
 IEEE802.11g,n OFDM WLAN power amplifier module providing the functionality of
the power amplifier, power detector, reference voltage
 Access Points generator and input match.
Features
The SE2576L is designed for ease of use and
 Dual Mode IEEE802.11b, IEEE802.11g, maximum flexibility, with an integrated input match,
IEEE802.11n and external output match to adjust the load line for
 26 dBm, EVM = 3%, 802.11g, OFDM 54 Mbps 5V, 26dBm operation.
 29 dBm, 802.11b mask compliant
The SE2576L includes a temperature compensated
 Integrated PA, Input Match, 2.8V reference transmit power detector with over 20 dB of dynamic
voltage generator range and <1.2dB variation under 3:1 mismatch at the
 Integrated Temperature Compensated, Positive antenna.
Slope Power Detector
 Pb-free, RoHS compliant and Halogen-free The SE2576L includes a digital enable control due to
 3 mm x 3 mm x 0.9 mm, MSL 3 an integrated reference voltage generator. The power
ramp rise/fall time is 0.5 μs typical.
Ordering Information
Part No. Package Remark

SE2576L 16 pin QFN Samples
SE2576L-R 16 pin QFN Tape & Reel
SE2576L-EK1 N/A Evaluation kit
Functional Block Diagram
EN VCC VCC2
Bias & Control
RFOUT
RFIN 50Ω
DET
DET
Figure 1: Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202428A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 1
DATA SHEET
Preliminary
Pin Out Diagram
VCC1
VCC2
NC
16 15 14 13
RF IN 1 12 GND
Ground Paddle
EN 2 11 RF OUT
GND 3 10 RF OUT
VCC0 4 9 GND
5 6 7 8
GND
GND
DET
NC
Figure 2: SE2576L Pin Out (Top View Through Package)
Pin Out Description
Pin No. Name Description
1 RF IN RF Input
2 EN Power Amplifier Enable
3 GND Ground
4 VCC0 Power Supply for Bias Circuit
5 GND Ground
6 GND Ground
7 DET Power Detector Output
8 NC No Connect. May be left floating or grounded.
9 GND Ground
10 RF OUT RF Output
11 RF OUT RF Output
12 GND Ground
nd
13 VCC2 Power Supply for 2 Stage
14 NC No Connect. May be left floating or grounded.
15 VCC1 Power Supply driver stages
16 GND Ground
Die paddle GND Ground
DATA SHEET
Preliminary
Absolute Maximum Ratings

These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC0, 1, 2 Supply Voltage on VCC -0.3 5.5 V

VIN DC input on EN -0.3 3.6 V
TX RF Input Power. RF Out terminated in 50Ω - 12.0 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
JEDEC JESD22-A114
ESD HBM - 1000 V
all pins
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C

VCC Supply voltage, relative to GND = 0 V 4.5 5 5.5 V
DC Electrical Characteristics
Conditions: VCC = 5 V, EN = VENH, TA = 25 °C, as measured on Skyworks Solutions’ SE2576L-EV1 evaluation
board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
POUT = 26 dBm, 54 Mbps

ICC-G Total Supply Current - 500 - mA
OFDM signal, 64QAM
POUT = 29 dBm, 11 Mbps
ICC-B Total Supply Current - 650 - mA
CCK signal, BT = 0.45
ICC_OFF Total Supply Current EN = 0 V, No RF Applied - 10 100 μA
Logic Characteristics
board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
VENH Logic High Voltage (Module On) - 1.8 - 3.6 V

VENL Logic Low Voltage (Module Off) - 0 - 0.4 V
IENH Input Current Logic High Voltage - - 300 - μA
DATA SHEET
Preliminary
IENL Input Current Logic Low Voltage VEN = 0.4V - 1 50 μA

Passive Pull
ZEN Enable pin input impedance 10 kΩ
Down
AC Electrical Characteristics
802.11g/n Transmit Characteristics
Conditions: VCC = 5 V, EN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2576L-EV1 evaluation

board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FIN Frequency Range - 2400 - 2500 MHz
54 Mbps OFDM signal, 64

- 26 -
QAM, 3% EVM
1 Mbps CCK signal,

29
BT = 0.045, Mask
POUT Output Power dBm
802.11n, HT20, all data
30
rates, Mask
802.11n, HT40, all data
27
rates, Mask
P1dB P1dB - - 32 - dBm
S21 Small Signal Gain - 30 33 - dB
Gain variation over single - 0.5 -
Small Signal Gain
ΔS21 40MHz channel dB
Variation
Gain Variation over band - 1.0 -
2f POUT = 29 dBm, 1 Mbps, - -50 -45 dBm/MHz
Harmonics
3f 802.11b - -50 -45 dBm/MHz
50 % of VEN edge and
Delay and rise/fall
tdr, tdf 90/10 % of final output - 0.5 - μs
Time
power level
S11 Input Return Loss - 10 15 - dB
CW, POUT = 29 dBm
All non-harmonically related outputs less than
STAB Stability 0.1 GHz – 20 GHz
-42 dBm/MHz
Load VSWR = 4:1
CW 50% duty cycle, PIN =
RU Ruggedness +12dBm, Load VSWR = No permanent damage.
6:1
DATA SHEET
Preliminary
Power Detector Characteristics

board, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 2400 - 2500 MHz

Power detect range,
PDR Measured at RF out 5 - 30 dBm
CW
DC source impedance
PDZsrc - - 2.3 - KΩ
on PD_OUT
PDZLOAD DC load impedance - - 26.5 - KΩ
Output Voltage, POUT =
PDVP5 Measured into 26.5KΩ - 0.33 - V
5dBm CW
26 dBm CW
30 dBm CW
Power detect low pass
LPF-3dB filter -3dB corner Measured into 26.5KΩ - 2.0 - MHz
frequency
Figure 3: SE2576L Detector Characteristics
DATA SHEET
Preliminary
Package Diagram
16 15 14 13 13 14 15 16
1 12 12 1
2 11 11 2
3 10 10 3
4 9 9 4
5 6 7 8 8 7 6 5
TOP VIEW BOTTOM VIEW
Figure 4: SE2576L Package Diagram
DATA SHEET
Preliminary
Recommended Land and Solder Patterns
Figure 5: SE2576L Recommended Land and Solder Pattern
Package Handling Information

Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed
regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly. The SE2576L is capable of
withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or
in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that
the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For
details on both attachment techniques, precautions, and handling procedures recommended, please refer to:
 “Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045
 “Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044
Caution! Class 1C ESD sensitive device
DATA SHEET
Preliminary
Branding Information
SiGe
2576L
Lot Code
Figure 6: SE2576L Branding
Tape and Reel Information
Parameter Value
Devices Per Reel 3000
Reel Diameter 13 inches
Tape Width 12 millimeters
Figure 7: SE2576L-R Tape and Reel Information
Document Change History

Revision Date Notes
1.0 Jan 10, 2009 Created

Updated PA Control Logic Characteristics
1.1 May 8, 2009
Updated POD for SE2576L datasheet.
1.2 Jul 8, 2009 Updated to correct pins 8 & 14 definitions.
1.3 Aug 2, 2009 Updated detector characteristics
1.4 Sep 24, 2009 Updated current consumption
1.5 Oct 25, 2009 Updated detector plot
1.6 Jan 25, 2010 Updated Off-State Leakage current
DATA SHEET
Preliminary
Revision Date Notes
1.7 Jun 22, 2010 Extended operating temperature to Industrial limits

Updated ESD rating
1.8 Dec 18, 2010
Added OFDM Mask Compliance
1.9 Apr 10, 2012 Updated with Skyworks logo and disclaimer statement
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein,
are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or
omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time,
without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other
difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials,
products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in
Skyworks Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE,
INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL
SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR
OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT,
INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE
MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to
personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to
fully indemnify Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or
operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks.
Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated
published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries.
Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions,
posted at www.skyworksinc.com, are incorporated by reference.

2576 L

Uploaded by

Copyright:

Available Formats

2576 L

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2576 L

Uploaded by

Copyright:

Available Formats

DATA SHEET

SE2576L: 2.4 GHz High Power Wireless LAN Power Amplifier

Applications Product Description

Part No. Package Remark

Functional Block Diagram

Bias & Control

Figure 1: Functional Block Diagram

Pin Out Diagram

Figure 2: SE2576L Pin Out (Top View Through Package)

Pin Out Description

Pin No. Name Description

Absolute Maximum Ratings

Symbol Definition Min. Max. Unit

VCC0, 1, 2 Supply Voltage on VCC -0.3 5.5 V

Recommended Operating Conditions

Symbol Parameter Min. Typ. Max. Unit

TA Ambient temperature -40 25 85 °C

POUT = 26 dBm, 54 Mbps

VENH Logic High Voltage (Module On) - 1.8 - 3.6 V

Symbol Parameter Conditions Min. Typ. Max. Unit

IENL Input Current Logic Low Voltage VEN = 0.4V - 1 50 μA

Conditions: VCC = 5 V, EN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2576L-EV1 evaluation

FIN Frequency Range - 2400 - 2500 MHz

54 Mbps OFDM signal, 64

1 Mbps CCK signal,

Power Detector Characteristics

Conditions: VCC = 5 V, EN = VENH, TA = 25 °C, as measured on Skyworks Solutions’ SE2576L-EV1 evaluation

FOUT Frequency Range - 2400 - 2500 MHz

Figure 3: SE2576L Detector Characteristics

TOP VIEW BOTTOM VIEW

Figure 4: SE2576L Package Diagram

Recommended Land and Solder Patterns

Figure 5: SE2576L Recommended Land and Solder Pattern

Package Handling Information

Caution! Class 1C ESD sensitive device

Figure 6: SE2576L Branding

Tape and Reel Information

Figure 7: SE2576L-R Tape and Reel Information

Document Change History

1.0 Jan 10, 2009 Created

Revision Date Notes

1.7 Jun 22, 2010 Extended operating temperature to Industrial limits

Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.

You might also like