ROEMHELD Group

Program Summary
PRODUCTS FOR PRODUCTIVITY
Workholding elements Workholding systems Zero point
Hydraulic cylinders Machine vises clamping systems

Clamping power units Hydraulic components Pneumatic elements

Handling technology Press-in devices Drive technology

Die clamping systems Magnetic clamping technology System solutions

CARR LANE ROEMHELD MFG. CO.

(636) 386-8022 • www.carrlaneroemheld.com
 Qu a
eed li
nt Quality
ty
a
Gu a r

as an obligation

To take a leadership role in the national as well as international quality

LD

87
9 competition the ROEMHELD Group feels obliged to a continuous process
RO E
1
since
of improvements. Thereby the high quality of the processes and products is
EMH always guaranteed even with continuously changing demands on the market.
ROEMHELD has achieved ISO 9001:2000 certification, which guarantees
compliance with standard guidelines.
In addition, it is a stated objective to make the products and services of
the ROEMHELD Group an established idea of quality. This will be a long-
Content term guarantee that the ROEMHELD Group will offer efficient and economic
Page products and will contribute to a considerable extent to the success of its
Hydraulic cylinders customers.
Workholding elements. . . . . . . . . 4-5

Workholding systems Solutions

from the catalog or as a customer-specific design
Machine vises. . . . . . . . . . . . . . . 6-7
In addition to the most comprehensive range of catalog elements and systems
Zero point clamping systems. . . . . . 8 available in clamping technology, the ROEMHELD Group permanently develops,
designs, manufactures and supplies customer-specific solutions in cooperation
Plates – angles – cubes . . . . . . . . . 9 with their customers.
This program summary of the product range of the ROEMHELD Group shows
Clamping power units essentially the catalog program.
Pressure generators . . . . . . . . . . . 10 Please contact Carr Lane Roemheld for customer-specific designs in North
America.
Hydraulic components. . . . . . . . . . 11
International
Electro-mechanical clamping elements
aimed at global presence
FSS clamping fixtures. . . . . . . . . . 12
Beside national customers, which are well looked after by 17 sales partners in
Drive technology Germany, export is more and more important. Already today the ROEMHELD
Pneumatic elements . . . . . . . . . . . 13 Group shows an export share of approx. 50 %, which increases to more than
65 % because of indirect exports.
Handling technology . . . . . . . . . . . 14

Press-in devices . . . . . . . . . . . . . . 15 Environment

the protection of the environment is important to us
Die clamping systems. . . . . . . 16-17
The companies of the ROEMHELD Group have their own environmental
management systems. These ensure that the impact of the production on the
Magnetic clamping technology outside world is kept to a minimum, only the necessary extent of emissions
Locking cylinders. . . . . . . . . . . . . . 18 occur and resources such as energy, water, air and raw materials are used as
carefully as possible.
System solutions for The environmental management system of ROEMHELD is certified ­according to
production engineering . . . . . . . . . 19 EN ISO 14001.

2
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 ROEMHELD — a strong Group
ROEMHELD forms together with the specialists in clamping technology HILMA and STARK
a group of companies, which offers an extensive product range in the field of clamping
technology for production engineering.
The product range is supplemented by numerous hydraulic elements for general industrial
use, as well as components and systems of the assembly and drive technology.
The ROEMHELD Group comprises about 500 employees with an annual turnover of approx.
98 million Euro.

Römheld GmbH Friedrichshütte

Germany

Hilma-Römheld GmbH

Germany

Stark Spannsysteme GmbH

Austria

3
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Hydraulic cylinders | Hydraulic workholding elements
Hydraulic cylinders for linear motions of every type
Operating pressure: up to 500 bar

Hydraulic cylinders
Hydraulic cylinders, design with tube
with/without end position monitoring
piston diameter: 25 … 80 mm
stroke: 60 … 1200 mm

Universal cylinders
Hydraulic cylinders with round housing
for axial adjustability
piston diameter: 10 … 63 mm
stroke: 8 … 100 mm

Threaded-body cylinders
Compact hydraulic cylinders
and built-in pistons for screwing in
piston diameter: 8 … 50 mm, stroke: 4 … 40 mm

Block cylinders
Hydraulic cylinders with block-type body
made of steel, aluminium or bronze
with/without end position monitoring
piston diameter: 16 … 200 mm
stroke: 8 … 200 mm

Hydraulic slides
Hydraulic cylinders with integrated guides
with/without end position monitoring
piston diameter: 25 … 100 mm
stroke: 20 … 200 mm

4
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Hydraulic elements for positioning and clamping of workpieces. Operating pressure: up to 500 bar

Bore clamps
Clamping elements for clamping in bore holes
with/without centering function / with pull-down clamping,
with/without seat check, bore hole diameter: 6.6 … 46 mm
max. low-clamping force 0.6 … 24.5 kN

Position flexible clamping elements

Clamping elements for "floating" clamping
for exterior and interior clamping
with/without position monitoring, max. clamping force: 7.5 kN

Clamps / clamping cylinders

Clamping elements for clamping in small recesses
with/without position monitoring, with/without self-locking
max. clamping force: 2.5 … 50 kN

Hinge clamps
Clamping elements with operation of a clamping lever
with/without position monitoring, max. clamping force: 1.3 … 21.5 kN
clamping stroke/clamping range: 2.0 … 9.0 mm

Swing clamps
Clamping elements with swing piston
with/without position monitoring
max. clamping force: 0.6 … 41 kN,
clamping stroke: 6 … 50 mm

Work supports
Elements to support workpieces
single or double acting, max. load force 4 … 102 kN
plunger diameter: 16 … 50 mm, plunger stroke: 6 … 20 mm

Concentric clamping elements

Clamping elements for concentric
positioning and clamping
for exterior and interior clamping , max. clamping force: 5 … 44 kN
repetitive clamping accuracy : ± 0.005 mm

Fixture clamps
Compact standard clamping systems
for use on fixtures
with fixed jaw, concentric or position flexible
max. clamping force: 6.5 … 15 kN, jaw width: 40 … 65 mm

Hollow-piston cylinders
Clamping cylinders with through hole in the piston
piston diameter: 20 … 80 mm
max. push force: 10 … 153 kN, clamping stroke: 6 … 40 mm

5
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www. carrlaneroemheld.com
Workholding systems | Machine vises
Mechanically, mechanically-hydraulically or hydraulically operated standard fixtures for workpieces

Machine vises Series EL Series NC Series KNC

Mechanically-hydraulically
or hydraulically operated
clamping against the fixed jaw
• with hydraulic power transmission
• completely encapsulated lead screw area
sizes: 100 … 160 mm
max. clamping force: 25 … 50 kN

5-axis clamping systems Series MC Series SCS Series PC

Mechanically or hydraulically operated
clamping against the fixed jaw or
concentric clamping
• compact design
• collision-free tool paths
sizes: 40 … 125 mm
max. clamping force: 8 … 35 kN

Double and multiple clamping

systems Series DS Series DF Series MSH
Mechanically, mechanically-hydraulically
or hydraulically-operated
clamping against the fixed jaw
• safe loading and unloading
by 3rd-hand function
sizes: 24 … 160 mm
max. clamping force: 25 … 63 kN

Compact clamping systems Series CS Series DCS Series DUO

Single and double clamping systems
mechanically or hydraulically operated
clamping against the fixed jaw
• compact design
• different overall lengths
sizes: 80 mm, max. clamping force: 12 … 20 kN

6
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Variant clamping system VarioLine Series VL Clamping jaws
Mechanically-hydraulically
top jaws with grip
or hydraulically operated spacer jaws
clamping against the fixed jaw precision step reversible jaws
• option: clamping force display precise step bars
• system with variants for formed jaws
customized machine vises central jaws
sizes: 100 … 160 mm pendulum jaws
max. clamping force: 25 … 60 kN precision step jaws
length of base: up to 750 mm Vee jaws
QIS base jaws
with permanent magnets
Concentric clamping systems Series ZH QIS interchangeable jaws, smooth
QIS interchangeable jaws, serrated
Hydraulically operated, double acting QIS interchangeable jaws, crowned
concentric clamping QIS interchangeable jaws, stepped
• high repetitive clamping repeatability ± 0.01 mm QIS interchangeable jaws, prismatic
• fixing and mounting possibilities for QIS interchangeable jaws, soft
customer-specific clamping jaws floating central jaws
sizes: 100 … 160 mm SlimFlex jaws
max. clamping force: 16 … 64 kN clamping jaws, soft
clamping jaws, extra high
clamping jaws, extra large
Automation Series ASH clamping jaws with grip bar
special grip jaws
Hydraulically operated, double acting reversible step jaws
clamping against the fixed jaw interchangeable inserts, round, with grip
• also available with position measuring system interchangeable inserts with grip /smooth
(electrically or via flow rate) interchangeable inserts
• setups can be automated with hard-metal coating /smooth
sizes: 100 … 125 mm reversible jaws
hydraulic stroke: up to 250 mm
max. clamping force: 32 kN

Tower clamping systems Series TS Series TS-TriStar

Arrangement of the clamping points:
TS: 4 x 90° | TS-TriStar: 3 x 120°
mechanically operated
clamping against the central fixed jaw
• for 4, 8 or 16 workpieces
•3  rd-hand function for safe loading and unloading
sizes: 24 … 160 mm
max. clamping force: 12 … 60 kN

Milling and turning machining Series KK

Box jaws, mechanically operated
• lead screw and nut completely encapsulated
• easy pre-adjustment using a scale
track: 150 and 180 mm
max. clamping force: 30 … 63 kN

Magnetic clamping systems M-TECS Series M TECS V Series M-TECS H

Horizontal or vertical
• easy positioning of workpieces
• 5-sided workpiece machining
square poles: 50 or 70 mm
plate thickness: 310 x 250 to 1000 x 610 mm (and specials)
max. retention force: 350 … 750 daN / Pol

7
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Zero point clamping systems
Clamping systems for exact zero point positioning and clamping of workpieces and fixtures

SPEEDY metec SPEEDY classic

Easy, compact Clamping force monitoring,
and sturdy seat check,
clamping: mechanically blast cleaning, flow power
unclamping: mechanically clamping: mechanically
max. retention force: 12 … 50 kN unclamping: hydraulically or
pneumatically
max. insertion force: 30 kN
max. retention force: 55 kN

SPEEDY airtec SPEEDY easy click

Quick and precise Clamping by pressing
clamping: mechanically clamping: mechanically
unclamping: pneumatically unclamping: pneumatically
max. clamping force: 20 kN max. clamping force: 5 kN
max. retention force: 55 kN
max. retention force: 10 kN

SPEEDY hydratec SPEEDY sweeper

Quick and flexible For automation
clamping: hydraulically clamping: mechanically
unclamping: hydraulically unclamping: hydraulically or
max. clamping force: 20 kN pneumatically
max. retention force: 38 kN max. insertion force: 20 kN
max. retention force: 38 kN

System 3000 Couplings

Strong and unique Universal and compact
clamping: hydraulically for hydraulics, pneumatics
unclamping: hydraulically vacuum and electrics
max. clamping force: 50 kN nominal diameters: 3 … 8 mm

CARR LANE ROEMHELD MFG. CO.

(636) 386-8022 • www.carrlaneroemheld.com
 Plates – Angles – Cubes
From standard elements to systems for flexible use - with minimum set-up time
– mechanical – hydraulic – pneumatic – electrical – single acting – double acting –

Quick-locking plates
For milling machining
from standard components, adapted to
the machine and machining task
• fully assembled with 3D dimensional
and functional test

Quick-locking plates
For turning machining
from standard components, adapted to
the machine and the machining task
• standard clamping monitoring
• applicator for pre-centering

Quick-locking cubes
For milling machining
from standard components, adapted to
the machine and the machining task
•3 rd-hand-function (DHF) prevents
dropping parts

Quick-locking plates
For automation
from standard components, adapted to
the machine and machining task
• flow power as interface for pneumatic or
­hydraulic clamping fixtures and signal
queries

9
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Clamping power units | Pressure generators
Clamping power units, hydraulic power units, hydro-pneumatic pump units and manually-operated pumps
to generate and control hydraulic pressure

Power units D 8.010 Power units D 8.0115

Compact and lightweight Ready for connection
energy-saving intermittent energy-saving intermittent
cycling cycling
flow rate: 0.5 … 0.8 l/min flow rate: 0.8 … 3.5 l/min
max. operating pressure: 200 bar max. operating pressure: 160 … 500 bar
reservoir volume approx. 3.5 l reservoir volume approx. 5 l
voltage: 400 VAC or 24 VDC voltage: 400 VAC

Power units D 8.013 Power units

D 8.015 | D 8.018
With two-hand operator
console With proportional pressure
flow rate: 0.9 … 4.5 l/min adjustment
max. operating pressure: 50 … 500 flow rate: 0.9 … 4.5 l/min
bar max. operating pressure: 200 … 500 bar
reservoir volume approx. 11 l reservoir volume approx. 11 l
voltage: 400 VAC voltage: 400 VAC

Power units D 8.021

Power units D 8.031
Basic version
flow rate: 0.9 … 6.2 l/min Oil reservoir V = 27 l, 40 l and
max. operating pressure: 50 … 500 63 l
bar flow rate: 4.5 … 24 l/min
reservoir volume approx. 11 l max. operating pressure: 50 … 500 bar
voltage: 400 VAC voltage: 400 VAC

Hydro-pneumatic
pump units Manually-operated
pumps
For single and double acting
cylinders Hydraulic pumps
flow rate: 0.85 … 1.5 l/min for single-acting cylinders
air pressure: 0.85 … 5.0 bar operation by hand or foot lever
max. operating pressure: 500 bar displacement per stroke: 2 … 12 cm3
Screw pumps
displacement: 21 cm3

10
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Hydraulic components
Elements for oil supply and control to hydraulic elements

Hydraulic valves Coupling elements

Directional control and shut-off valves For hydraulic oil,
Throttle and pressure control valves compressed air and vacuum
Pressure relief valves nominal diameter: ND 3 … 8
Check valves max. flow rate 8 … 35 l/min
max. operating pressure: 300 … 500 bar
Sequence valves
Valve combinations
Multi-couplings
Hydraulic accumulator
2 to 12 passages
Diaphragm accumulator for nominal diameter: ND 5 … 8
hydraulic oil with nitrogen gas filling depressurised coupling or coupling against
nominal volume: 13 … 750 cm³ pressure
connections: G¼ … G½ max. operating pressure: 300 bar
max. operating pressure: 250 … 500 bar
High-pressure filters
Rotary couplings In-line filters, plug-in filters
Rotary couplings and rotary valve and rectifier filter
couplings filter fineness: 10 and 100 µm
for oil supply to rotating material: stainless steel and steel
and swivelling installations max. operating pressure: 350 and 500 bar
max. operating pressure: 500 bar
Coupling units and systems
Intensifiers Manually or automatically operated
Hydraulic-hydraulic or for single or double
pneumatic-hydraulic acting elements
single and double acting max. operating pressure: 400 and 500 bar
max. output pressure: 500 bar

Piping elements
Pressure transducer Fittings
Piston pressure switch Hydraulic hoses / Hydraulic oil
with continuously adjustable switching point Precision steel pipes
manifold mounting or G¼
Plug-in connectors
Pressure gauges / pipe clamps

11
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Electro-mechanical clamping elements
Electric swing clamps Electric block cylinders
max. clamping force: 7 kN max. clamping force: 10 … 20 kN
clamping stroke: 23 mm stroke: 100 mm
swing angle: max. 180° voltage: 24 / 48 V DC
voltage: 24 V DC

Electric work supports Electric wedge clamping

elements
max. load force 20 kN
plunger stroke: 20 mm max. retention force: 130 … 320 kN
voltage: 24 V DC clamping stroke: 20 mm
voltage: 24 V DC

FSS clamping systems

Flexible clamping and support elements for clamping of thin-walled workpieces with free-form surfaces

Clamping and supporting The core elements of a FSS clamping system are the clamping
elements and support elements that can be used in unlimited quantity and
that t­ogether form the contact surface of the workpiece.
Elements with their own linear Since each element can be positioned individually on the
actuator and vacuum clamping relevant workpiece geometry, FSS clamping systems allow for a
technology flexible configuration of individual surfaces to clamp and support
piston rod Ø: up to  70 mm workpieces.
strokes: 100 up to 1000 mm Depending on the workpiece surface and geometry, clamping
max. axial support force: 1.2 … 12.0 kN forces of 300 N per element and more can be obtained.

12
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www. carrlaneroemheld.com
 Drive technology
Electrically and manually operated linear actuators for adjusting procedures under demanding conditions
in industry, automotive engineering and medicine technology

Electrically-operated linear Manually-operated linear

actuators actuators
Voltage: 12 or 24 VDC Manual-hydraulic version
version with limit switches max. force: 4.5 … 12.5 kN
stroke: 80 … 600 mm
or stroke measuring system
max. force: 0.3 … 6.0 kN
stroke: 100 … 600 mm

Pneumatic elements

Pneumatic swing clamps Pneumatic rotary valve couplings

Pneumatically operated swing
With adjustable magnetic sensors clamps and rotary couplings
Number of for pneumatics
stations: 5 … 8
double acting nominal diameter 3
max. clamping force: 140 … 1400 N max. operating pressure: 10 bar
max. operating pressure: 7 bar

13
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
Handling technology
Modular Units program – modules for rotating, lifting, tilting and moving of heavy workpieces
Individual modules can be easily combined to built multi-functional units

Rotating modules – Rotating modules – vertical

horizontal axis axis
For rotation of the workpiece For rotation of the workpiece
around the horizontal axis around the vertical axis
manually or electrically operated manually or electrically operated
option: indexing option: indexing
option: flow power option: flow power
workpiece weight: up to 200 kg workpiece weight: up to 1000 kg

Lifting modules Tilting modules

For guided lifting and For tilting or swivelling of the
lowering of the workpiece workpiece around an axis between
operated by a hydraulic the final positions 0° and 90°
or electrical actuator manually or electrically operated
workpiece weight: up to 600 kg option: indexing
max. strokes: 200 … 1000 mm workpiece weight: up to 100 kg

Cart modules Floor modules

To displace manually Base frame for 1 or 2 modules
individual modules or to compensate unevenness of the floor
space and good stability
module combinations max. load: 6000 and 8000 N
with parking brake
max. load: 2000 and 6000 N

Clamping fixtures Accessories

To clamp workpieces Base plates, Adaptor plates,
on modular fixtures Flange plates, Table plates,
• hydraulic and mechanical clamping Supply units, Hand panels,
elements with universal clamping plate
•q uick-change mounting plate with STARK
Foot switches, Operating panels,
zero point clamping system Power supply for mobile systems,
Command modules
14
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 Press-in devices
modupress module program – hydraulically or electrically-operated press in devices
for power-operated processes such as jointing, pressing-in, jolting, deforming and riveting
Press-in devices P 1.100 Press-in devices P 1.200
Portal design C-frame design
hydraulic drive hydraulic drive
creep/rapid speed control with creep/rapid speed control with
optional force/stroke monitoring optional force/stroke monitoring
max. press-in force: 40 … 100 kN max. press-in force: 40 … 100 kN

Press-in devices P 1.101 Press-in devices P 1.201

Portal design C-frame design
electrical drive electrical drive
creep/rapid speed control with creep/rapid speed control with
optional force/stroke monitoring optional force/stroke monitoring
max. press-in force: 7 and 25 kN max. press-in force: 7 and 25 kN

Press-in devices P 1.102 Press-in devices P 1.202

Portal design C-frame design
hydraulic drive hydraulic drive
creep/rapid speed control with creep/rapid speed control with
programming of the operating time programming of the operating time
max. press-in force: 40 … 100 kN max. press-in force: 40 … 100 kN

Press-in devices P 1.220 Accessories

C-frame compact design Protection cabins, Light grids,
table-top version Sliding tables, Sensor technology,
hydraulic drive Quick-disconnect couplings
with integrated power unit
and pressure switching
max. press-in force: 40 … 100 kN

15
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 Die clamping systems
Die clamping and changing systems for press automation
Quick changing systems for machines, presses and equipments

Hydraulic workholding elements

Hollow-piston cylinders
for retrofitting on press bed and ram
Spring clamping cylinders
for spring-loaded long-term clamping
Angular clamps
for clamping on small clamping edges

Clamping bars
flat clamping element for bed and ram
max. clamping force: 30 … 116 kN, piston stroke: up to 8 mm
Double-T clamping bars
to use the complete bed or ram surface
max. clamping force: 16 … 320 kN
Sliding clamps
for insertion in T-slots
max. clamping force: 19 … 78 kN, piston stroke: up to 12 mm

Swivel and pull clamps

clamping cylinders with tie rods
Wedge clamps
sturdy clamping elements for straight or inclined
clamping edge
max. clamping force: 1250 kN
Block clamps
with self-locking mechanical lock
max. clamping force: 200 kN

Pull-type clamping element

max. clamping force: 104 … 160 kN, clamping stroke: 10 mm
Swing / swing sink clamping elements
without interfering edges when inserting the die
max. clamping force: 60 … 164 kN
Rapid clamping systems
automatic travelling units with clamping element

Pull-type cylinders
pull-type cylinder with tie rod for inaccessible points
Wedge swing clamps
with mechanical lock
Grip rail couplings
rapid clamping system for grip rails
16
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 Electro-mechanical clamping elements
Tenon-type clamping elements
clamping by grip and pull movement
Swivel and pull clamps
clamping by swivel and lifting movement
Swing clamps
clamping by swing and lifting movement
max. clamping force: 70 … 160 kN

Wedge clamping elements

compact electro-mechanical power package
max. clamping force: 160 kN, retention force 300 kN
Angular clamps
clamping in any position of the travelling path
max. clamping force: 50 kN, retention force 320 kN

Mechanical clamping elements

Sliding clamps
with integral high-pressure spindle
Clamping blocks with high-pressure spindle
with integral high-pressure spindle

High-pressure spindles, separate
with integral wedge system
max. clamping force: 40 … 120 kN

Clamping nuts, mechanical

without / with clamping force display
max. clamping force: 60 … 200 kN
Clamping nuts, hydro-mechanical
with integral hydraulic cushion
max. clamping force: 60 … 150 kN

Die changing technology

Roller bars
hydraulic or spring-loaded
Ball bars
hydraulic or spring-loaded
Roller conveyors
without lifting
Roller and ball inserts
spring-loaded

Carrying consoles, hanging

max. load per pair: 5 … 30 kN
Carrying consoles, supported Typ 1835-k
Konsole aar
Traglast/P

max. load per pair: 20 … 250 kN

Carrying consoles, swivelling
max. load per pair: 10 … 60 kN

Changing carts
for handling of dies up to 500 kg
with ball table, hydraulic height adjustment
and safety docking station
Die changing consoles
with drive system for die weights up to 250 kN

17
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 Magnetic clamping technology
M-TECS magnetic clamping plates and systems for injection molding machines,
forming presses, rubber presses, mould carriers, milling machines and machining centers

M-TECS 130-K M-TECS 80-B

For the plastics industry For sheet metal forming
max. temperature range: 130 °C max. temperature range: 80 °C
plate thickness: 47 mm plate thickness: 55 … 67 mm

M-TECS 240-D M-TECS 240-G

For die-casting machines For the rubber and Duroplast industry
max. temperature range: 240 °C max. temperature range: 240 °C
plate thickness: 55 mm plate thickness: 55 … 75 mm

M-TECS 80-F M-TECS 40-F

For mold carrier systems For machining
max. temperature range: 80 °C max. temperature range: 40 °C
plate thickness: 47 mm plate thickness: 55 … 67 mm

Locking cylinders
To fix rotors of on- and offshore wind power plants
for maintenance works
Rotorlock
Hydraulic, mechanical
or electro-mechanical
sizes: up to 7500 kN side load
with position monitoring
corrosion protection as per DIN ISO 12944
max. temperature range: – 40 … + 70 °C
18
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www. carrlaneroemheld.com
 System solutions for production engineering
Consulting, design, planning, engineering, construction design, production,
delivery, start up and maintenance of clamping and positioning systems

All from a single source

From the idea to the engineering up to start up and
maintenance
If it is the matter of planning of clamping systems for a new machine tool or of
optimizing and transition to flexible of already existing clamping processes, we
give you our advice and support.
Based on your demands, we develop for you ideas and support you in
engineering, start up and maintenance.

Expert know-how on call

Individual consultation and services
From the first consultation free of cost up to order-related services, our activities
for all tasks are adapted to your requests and objectives.
If it is a matter of preparation of concepts or constructional sketches for partial or
­complete solutions or calculations of amortizations or detailed designs:
You decide yourself which services you would like to use.

Approved and reliable solutions

Clamping and fixture systems made of standard modules
With the experience in realizing versatile individual projects in the individual
companies of the ROEMHELD Group, we are now in the position to offer a unique,
modular product range of clamping and fixture systems.
The use of approved and reliable standard modules is the key for optimized
production and engineering costs and guarantees the realization of individual system
solutions without risks.

System solutions – directly from the manufacturer

of power workholding
Customer-specific clamping and positioning systems
Our engineering know-how and the huge number of fully-developed clamping and
positioning technologies in the ROEMHELD Group allows us to produce and to
deliver customer-specific systems.
Due to design and production of the relevant components within the ROEMHELD
Group we have access to extended know-how and well-proven production
engineering, which together with our engineering know-how guarantees a fully-
developed and reliable ­function of the complete system.

19
CARR LANE ROEMHELD MFG. CO.
(636) 386-8022 • www.carrlaneroemheld.com
 ROEMHELD Product Lines:

• Power workholding devices

• Quick die change for stamping
• CNC machining center vises
• Quick mold change for plastics and rubber
• Zero point mounting systems
• Assembly devices

Find us on Facebook Badge CMYK / .eps

facebook.com/CarrLaneRoemheld

linkedin.com/company/carr-lane-roemheld
Are you interested in an individual
consultation or do you have any
youtube.com/carrlaneroemheld questions about our products?
We are pleased to support you.
instagram.com/carrlaneroemheld

927 Horan Drive • Fenton, MO 63026

Phone 636-386-8022 • Fax (636) 386-8034
Web: carrlaneroemheld.com
Email: info@clrh.com
20
CLR Program Summary CARR LANE ROEMHELD MFG. CO.
7/16 (636) 386-8022 • www. carrlaneroemheld.com