Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Huawei Switch Config Steps

    Uploaded by

    johnmathai_16
    The document provides configuration steps for a network switch including setting the console parameters, creating VLANs, configuring switch and port settings, enabling HTTP, and saving and viewing the configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Huawei Switch Config Steps

    Uploaded by

    johnmathai_16
    4K views2 pages
    The document provides configuration steps for a network switch including setting the console parameters, creating VLANs, configuring switch and port settings, enabling HTTP, and saving and viewing the configuration.

    Original Description:

    Huawei switch configuration steps

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides configuration steps for a network switch including setting the console parameters, creating VLANs, configuring switch and port settings, enabling HTTP, and saving and viewing the configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    4K views2 pages

    Huawei Switch Config Steps

    Uploaded by

    johnmathai_16
    The document provides configuration steps for a network switch including setting the console parameters, creating VLANs, configuring switch and port settings, enabling HTTP, and saving and viewing the configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    1.

    Set Console baud rate 9600


    2. Set Console Password as - admin123
    3. <Quidway>system-view ##[Quidway]
    4. Vlan Creation

    [Quidway] vlan batch 4084 to 4085 4090 to 4092

    5. Switch Management IP Setting

    [Quidway] interface Vlanif4092


    ip address 10.4.183.230 255.255.255.0
    quit
    ip route-static 10.4.0.0 255.255.0.0 10.4.183.1 #gateway
    6. telnet Enable

    [Quidway]aaa
    local-user huawei password cipher huawei ##Enter Y (Password Weak)
    local-user huawei privilege level 15
    local-user huawei service-type telnet
    quit
    [Quidway] user-interface vty 0 4
    authentication-mode aaa
    quit
    7. Port Configuration

    [Quidway] interface Ethernet0/0/1


    port link-type access
    port default vlan 4092
    quit

    [Quidway] interface Ethernet0/0/2


    port link-type access
    port default vlan 4090
    quit

    [Quidway] interface Ethernet0/0/3


    port link-type access
    port default vlan 4090
    quit

    [Quidway] interface Ethernet0/0/4


    port link-type access
    port default vlan 4090
    quit

    [Quidway] interface Ethernet0/0/5


    port link-type access
    port default vlan 4091
    quit

    [Quidway] interface Ethernet0/0/6


    port link-type access
    port default vlan 4091
    quit

    [Quidway] interface Ethernet0/0/7


    port link-type access
    port default vlan 4091
    quit

    //interface Ethernet0/0/8 ## no need to config//

    [Quidway] interface GigabitEthernet0/0/1


    port link-type trunk
    port trunk allow-pass vlan 4084 to 4085 4090 to 4092
    quit

    8. http Enable

    [Quidway] http server load s2700ei-v100r006c05.web.zip


    http secure-server enable
    http server enable
    [Quidway]aaa
    local-user huaweiweb password cipher huawei ##Enter Y (Password Weak)
    local-user huaweiweb privilege level 15
    local-user huaweiweb service-type http
    quit

    9. Saving Config

    <Quidway> save

    10.View Config

    <Quidway>display current-config

    You might also like