F Phy PDF

The Free High School Science Texts: A Textbook for High
School Students Studying Physics.
FHSST Authors1
December 9, 2005
1
See http://savannah.nongnu.org/projects/fhsst
Copyright ° c 2003 “Free High School Science Texts”
Permission is granted to copy, distribute and/or modify this document under the
terms of the GNU Free Documentation License, Version 1.2 or any later version
published by the Free Software Foundation; with no Invariant Sections, no Front-
Cover Texts, and no Back-Cover Texts. A copy of the license is included in the
section entitled “GNU Free Documentation License”.
i
Contents
I Physics 1
1 Units 3
1.1 PGCE Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 ‘TO DO’ LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Unit Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4.1 SI Units (Système International d’Unités) . . . . . . . . . . . . . . . . . . 4
1.4.2 The Other Systems of Units . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.5 The Importance of Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.6 Choice of Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.7 How to Change Units— the “Multiply by 1” Technique . . . . . . . . . . . . . . 7
1.8 How Units Can Help You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.8.1 What is a ‘sanity test’ ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.9 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.10 Scientific Notation, Significant Figures and Rounding . . . . . . . . . . . . . . . . 9
1.11 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Waves and Wavelike Motion 11

2.1 What are waves? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.1 Characteristics of Waves : Amplitude . . . . . . . . . . . . . . . . . . . . 11
2.1.2 Characteristics of Waves : Wavelength . . . . . . . . . . . . . . . . . . . . 12
2.1.3 Characteristics of Waves : Period . . . . . . . . . . . . . . . . . . . . . . . 12
2.1.4 Characteristics of Waves : Frequency . . . . . . . . . . . . . . . . . . . . . 13
2.1.5 Characteristics of Waves : Speed . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Two Types of Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3 Properties of Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.3.1 Properties of Waves : Reflection . . . . . . . . . . . . . . . . . . . . . . . 15
2.3.2 Properties of Waves : Refraction . . . . . . . . . . . . . . . . . . . . . . . 17
2.3.3 Properties of Waves : Interference . . . . . . . . . . . . . . . . . . . . . . 19
2.3.4 Properties of Waves : Standing Waves . . . . . . . . . . . . . . . . . . . . 20
2.3.5 Beats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.3.6 Properties of Waves : Diffraction . . . . . . . . . . . . . . . . . . . . . . . 28
2.3.7 Properties of Waves : Dispersion . . . . . . . . . . . . . . . . . . . . . . . 30
2.4 Practical Applications of Waves: Sound Waves . . . . . . . . . . . . . . . . . . . 30
2.4.1 Doppler Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.4.2 Mach Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.4.3 Ultra-Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
ii
2.5 Important Equations and Quantities . . . . . . . . . . . . . . . . . . . . . . . . . 35
3 Geometrical Optics 37
3.1 Refraction re-looked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.1.1 Apparent and Real Depth: . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.1.2 Splitting of White Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.1.3 Total Internal Reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.2 Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.2.1 Convex lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.2.2 Concave Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.2.3 Magnification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.2.4 Compound Microscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.2.5 The Human Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4 Reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4.1 Diffuse reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4.2 Regular reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4.3 Laws of reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4.4 Lateral inversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.5 Curved Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.5.1 Concave Mirrors (Converging Mirrors) . . . . . . . . . . . . . . . . . . . . 45
3.5.2 Convex Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3.5.3 Refraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3.5.4 Laws of Refraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.5 Total Internal Reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.5.6 Mirage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.6 The Electromagnetic Spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4 Vectors 51
4.1 PGCE Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.2 ‘TO DO’ LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.3.1 Mathematical representation . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.3.2 Graphical representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.4 Some Examples of Vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.4.1 Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.4.2 Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.4.3 Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4.5 Mathematical Properties of Vectors . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.5.1 Addition of Vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.5.2 Subtraction of Vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4.5.3 Scalar Multiplication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.6 Techniques of Vector Addition . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.6.1 Graphical Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.6.2 Algebraic Addition and Subtraction of Vectors . . . . . . . . . . . . . . . 71
4.7 Components of Vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.7.1 Block on an incline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
4.7.2 Vector addition using components . . . . . . . . . . . . . . . . . . . . . . 79
iii
4.8 Do I really need to learn about vectors? Are they really useful? . . . . . . . . . . 83
4.9 Summary of Important Quantities, Equations and Concepts . . . . . . . . . . . . 83
5 Forces 85
5.1 ‘TO DO’ LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
5.2 What is a force? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
5.3 Force diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
5.4 Equilibrium of Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
5.5 Newton’s Laws of Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
5.5.1 First Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
5.5.2 Second Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
5.5.3 Third Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
5.6 Examples of Forces Studied Later . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
5.6.1 Newtonian Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
5.6.2 Electromagnetic Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
6 Rectilinear Motion 104

6.1 What is rectilinear motion? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
6.2 Speed and Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
6.3 Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
6.3.1 Displacement-Time Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . 106
6.3.2 Velocity-Time Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
6.3.3 Acceleration-Time Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
6.3.4 Worked Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
6.4 Equations of Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
7 Momentum 126
7.1 What is Momentum? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
7.2 The Momentum of a System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
7.3 Change in Momentum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
7.4 What properties does momentum have? . . . . . . . . . . . . . . . . . . . . . . . 133
7.5 Impulse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
8 Work and Energy 140

8.1 What are Work and Energy? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.2 Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.3 Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
8.3.1 Types of Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
8.4 Mechanical Energy and Energy Conservation . . . . . . . . . . . . . . . . . . . . 149
Essay 1 : Energy 152
Essay 2 : Tiny, Violent Collisions 158
iv
9 Collisions and Explosions 159
9.1 Types of Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
9.1.1 Elastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
9.1.2 Inelastic Collisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
9.2 Explosions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
9.3 Explosions: Energy and Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
10 Newtonian Gravitation 176

10.1 Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
10.2 Mass and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
10.2.1 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
10.3 Normal Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
10.4 Comparative problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
10.4.1 Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
10.5 Falling bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
10.6 Terminal velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
10.7 Drag force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
11 Pressure 187
Essay 3 : Pressure and Forces 188
12 Heat and Properties of Matter 190

12.1 Phases of matter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
12.1.1 Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
12.2 Phases of matter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
12.2.1 Solids, liquids, gasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.2.2 Pressure in fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.2.3 change of phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.3 Deformation of solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.3.1 strain, stress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.3.2 Elastic and plastic behavior . . . . . . . . . . . . . . . . . . . . . . . . . . 194
12.4 Ideal gasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
12.4.1 Equation of state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
12.4.2 Kinetic theory of gasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
12.4.3 Pressure of a gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
12.4.4 Kinetic energy of molecules . . . . . . . . . . . . . . . . . . . . . . . . . . 208
12.5 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
12.5.1 Thermal equilibrium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
12.5.2 Temperature scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
12.5.3 Practical thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
12.5.4 Specific heat capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
12.5.5 Specific latent heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
12.5.6 Internal energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
12.5.7 First law of thermodynamics . . . . . . . . . . . . . . . . . . . . . . . . . 215
v
13 Electrostatics 216
13.1 What is Electrostatics? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
13.2 Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
13.3 Electrostatic Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
13.3.1 Coulomb’s Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
13.4 Electric Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
13.4.1 Test Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
13.4.2 What do field maps look like? . . . . . . . . . . . . . . . . . . . . . . . . . 223
13.4.3 Combined Charge Distributions . . . . . . . . . . . . . . . . . . . . . . . . 225
13.4.4 Parallel plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
13.4.5 What about the Strength of the Electric Field? . . . . . . . . . . . . . . . 229
13.5 Electrical Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
13.5.1 Work Done and Energy Transfer in a Field . . . . . . . . . . . . . . . . . 230
13.5.2 Electrical Potential Difference . . . . . . . . . . . . . . . . . . . . . . . . . 233
13.5.3 Millikan’s Oil-drop Experiment . . . . . . . . . . . . . . . . . . . . . . . . 236
14 Electricity 240
14.1 Flow of Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
14.2 Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
14.3 Voltage and current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
14.4 Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
14.5 Voltage and current in a practical circuit . . . . . . . . . . . . . . . . . . . . . . . 254
14.6 Direction of current flow in a circuit . . . . . . . . . . . . . . . . . . . . . . . . . 256
14.7 How voltage, current, and resistance relate . . . . . . . . . . . . . . . . . . . . . . 258
14.8 Voltmeters, ammeters, and ohmmeters . . . . . . . . . . . . . . . . . . . . . . . . 262
14.9 An analogy for Ohm’s Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
14.10Power in electric circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
14.11Calculating electric power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
14.12Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
14.13Nonlinear conduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
14.14Circuit wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
14.15Polarity of voltage drops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
14.16What are ”series” and ”parallel” circuits? . . . . . . . . . . . . . . . . . . . . . . 272
14.17Simple series circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
14.18Simple parallel circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
14.19Power calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
14.20Correct use of Ohm’s Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
14.21Conductor size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
14.22Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
14.23Important Equations and Quantities . . . . . . . . . . . . . . . . . . . . . . . . . 285
15 Magnets and Electromagnetism 288

15.1 Electromagnetism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
15.2 Magnetic units of measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
15.3 Electromagnetic induction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
15.4 AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
15.5 Measurements of AC magnitude . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
vi
16 Electronics 315
16.1 capacitive and inductive circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
16.1.1 A capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
16.1.2 An inductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
16.2 filters and signal tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
16.3 active circuit elements, diode, LED and field effect transistor, operational amplifier 316
16.3.1 Diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
16.3.2 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
16.3.3 Transistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
16.3.4 The transistor as a switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
16.4 principles of digital electronics logical gates, counting circuits . . . . . . . . . . . 332
16.4.1 Electronic logic gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
16.5 Counting circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
16.5.1 Half Adder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
16.5.2 Full adder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
17 The Atom 335

17.1 Models of the Atom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
17.2 Structure of the Atom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
17.3 Isotopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
17.4 Energy quantization and electron configuration . . . . . . . . . . . . . . . . . . . 336
17.5 Periodicity of ionization energy to support atom arrangement in Periodic Table . 336
17.6 Successive ionisation energies to provide evidence for arrangement of electrons into
core and valence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
17.7 Bohr orbits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
17.8 Heisenberg uncertainty Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
17.9 Pauli exclusion principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
17.10Ionization Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
17.11Electron configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
17.12Valency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
17.13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
18 Modern Physics 342

18.1 Introduction to the idea of a quantum . . . . . . . . . . . . . . . . . . . . . . . . 342
18.2 The wave-particle duality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
18.3 Practical Applications of Waves: Electromagnetic Waves . . . . . . . . . . . . . . 343
19 Inside atomic nucleus 345

19.1 What the atom is made of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
19.2 Nucleus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
19.2.1 Proton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
19.2.2 Neutron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
19.2.3 Isotopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
19.3 Nuclear force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
19.4 Binding energy and nuclear masses . . . . . . . . . . . . . . . . . . . . . . . . . . 349
19.4.1 Binding energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
19.4.2 Nuclear energy units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
19.4.3 Mass defect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
19.4.4 Nuclear masses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
vii
19.5 Radioactivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
19.5.1 Discovery of radioactivity . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
19.5.2 Nuclear α, β, and γ rays . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
19.5.3 Danger of the ionizing radiation . . . . . . . . . . . . . . . . . . . . . . . 354
19.5.4 Decay law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
19.5.5 Radioactive dating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
19.6 Nuclear reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
19.7 Detectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
19.7.1 Geiger counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
19.7.2 Fluorescent screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
19.7.3 Photo-emulsion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
19.7.4 Wilson’s chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
19.7.5 Bubble chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
19.7.6 Spark chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
19.8 Nuclear energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
19.8.1 Nuclear reactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
19.8.2 Fusion energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
19.9 Elementary particles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
19.9.1 β decay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
19.9.2 Particle physics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
19.9.3 Quarks and leptons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
19.9.4 Forces of nature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
19.10Origin of the universe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
A GNU Free Documentation License 382
viii
Part I
Physics
1
Physics is the study of the world around us. In a sense we are more qualified to do physics
than any other science. From the day we are born we study the things around us in an effort to
understand how they work and relate to each other. Learning how to catch or throw a ball is a
physics undertaking for example.
In the field of study we refer to as physics we just try to make the things everyone has
been studying more clear. We attempt to describe them through simple rules and mathematics.
Mathematics is merely the language we use.
The best approach to physics is to relate everything you learn to things you have already
noticed in your everyday life. Sometimes when you look at things closely you discover things you
had overlooked intially.
It is the continued scrutiny of everything we know about the world around us that leads
people to the lifelong study of physics. You can start with asking a simple question like ”Why
is the sky blue?” which could lead you to electromagnetic waves which in turn could lead you
wave particle duality and to energy levels of atoms and before long you are studying quantum
mechanics or the structure of the universe.
In the sections that follow notice that we will try to describe how we will communicate the
things we are dealing with. This is our langauge. Once this is done we can begin the adventure
of looking more closely at the world we live in.
2
Chapter 1
Units
1.1 PGCE Comments

• Explain what is meant by ‘physical quantity’.
• Chapter is too full of tables and words; need figures to make it more interesting.
• Make researching history of SI units a small project.
• Multiply by one technique: not positive! Suggest using exponents instead (i.e. use the
table of prefixes). This also works better for changing complicated units (km/h −1 to
m.s−1 etc....). Opinion that this technique is limited in its application.
• Edit NASA story.
• The Temperature section should be cut-down. SW: I have edited the original section but
perhaps a more aggressive edit is justified with the details deffered until the section on
gases.
1.2 ‘TO DO’ LIST

• Write section on scientific notation, significant figures and rounding.
• Add to sanity test table of sensible values for things.
• Graph Celsius/Kelvin ladder.
• Address PGCE comments above.
1.3 Introduction
Imagine you had to make curtains and needed to buy material. The shop assistant would need
to know how much material was required. Telling her you need material 2 wide and 6 long would
be insufficient— you have to specify the unit (i.e. 2 metres wide and 6 metres long). Without
the unit the information is incomplete and the shop assistant would have to guess. If you were
making curtains for a doll’s house the dimensions might be 2 centimetres wide and 6 centimetres
long!
3
Base quantity Name Symbol
length metre m
mass kilogram kg
time second s
electric current ampere A
thermodynamic temperature kelvin K
amount of substance mole mol
luminous intensity candela cd
Table 1.1: SI Base Units
It is not just lengths that have units, all physical quantities have units (e.g. time and tem-
perature).
1.4 Unit Systems

There are many unit systems in use today. Physicists, for example, use 4 main sets of units: SI
units, c.g.s units, imperial units and natural units.
Depending on where you are in the world or what area of physics you work in, the units will
be different. For example, in South Africa road distances are measured in kilometres (SI units),
while in England they are measured in miles (imperial units). You could even make up your own
system of units if you wished, but you would then have to teach people how to use it!
1.4.1 SI Units (Système International d’Unités)

These are the internationally agreed upon units and the ones we will use. Historically these
units are based on the metric system which was developed in France at the time of the French
Revolution.
All physical quantities have units which can be built from the 7 base units listed in Table 1.1
(incidentally the choice of these seven was arbitrary). They are called base units because none of
them can be expressed as combinations of the other six. This is similar to breaking a language
down into a set of sounds from which all words are made. Another way of viewing the base units
is like the three primary colours. All other colours can be made from the primary colours but
no primary colour can be made by combining the other two primaries.
Unit names are always written with lowercase initials (e.g. the metre). The symbols (or
abbreviations) of units are also written with lowercase initials except if they are named after
scientists (e.g. the kelvin (K) and the ampere (A)).
To make life convenient, particular combinations of the base units are given special names.
This makes working with them easier, but it is always correct to reduce everything to the base
units. Table 1.2 lists some examples of combinations of SI base units assigned special names. Do
not be concerned if the formulae look unfamiliar at this stage– we will deal with each in detail
in the chapters ahead (as well as many others)!
It is very important that you are able to say the units correctly. For instance, the newton is
another name for the kilogram metre per second squared (kg.m.s−2 ), while the kilogram
metre squared per second squared (kg.m2 .s−2 ) is called the joule.
Another important aspect of dealing with units is the prefixes that they sometimes have
(prefixes are words or letters written in front that change the meaning). The kilogram (kg) is a
simple example. 1kg is 1000g or 1 × 103 g. Grouping the 103 and the g together we can replace
4
Quantity Formula Unit Expressed in Name of
Base Units Combination
Force ma kg.m.s−2 N (newton)
1
Frequency T s−1 Hz (hertz)
Work & Energy F.s kg.m2 .s−2 J (joule)
Table 1.2: Some Examples of Combinations of SI Base Units Assigned Special Names
the 103 with the prefix k (kilo). Therefore the k takes the place of the 103 . Incidentally the
kilogram is unique in that it is the only SI base unit containing a prefix
There are prefixes for many powers of 10 (Table 1.3 lists a large set of these prefixes). This
is a larger set than you will need but it serves as a good reference. The case of the prefix symbol
is very important. Where a letter features twice in the table, it is written in uppercase for
exponents bigger than one and in lowercase for exponents less than one. Those prefixes listed
in boldface should be learnt.
Prefix Symbol Exponent Prefix Symbol Exponent

yotta Y 1024 yocto y 10−24
zetta Z 1021 zepto z 10−21
exa E 1018 atto a 10−18
peta P 1015 femto f 10−15
tera T 1012 pico p 10−12
giga G 109 nano n 10−9
mega M 106 micro µ 10−6
kilo k 103 milli m 10−3
hecto h 102 centi c 10−2
deca da 101 deci d 10−1
Table 1.3: Unit Prefixes
As another example of the use of prefixes, 1 × 10−3 g can be written as 1mg (1 milligram).
1.4.2 The Other Systems of Units

The remaining sets of units, although not used by us, are also internationally recognised and still
in use by others. We will mention them briefly for interest only.
c.g.s Units
In this system the metre is replaced by the centimetre and the kilogram is replaced by the
gram. This is a simple change but it means that all units derived from these two are changed.
For example, the units of force and work are different. These units are used most often in
astrophysics and atomic physics.
Imperial Units
These units (as their name suggests) stem from the days when monarchs decided measures. Here
all the base units are different, except the measure of time. This is the unit system you are
most likely to encounter if SI units are not used. These units are used by the Americans and
5
British. As you can imagine, having different units in use from place to place makes scientific
communication very difficult. This was the motivation for adopting a set of internationally agreed
upon units.
Natural Units
This is the most sophisticated choice of units. Here the most fundamental discovered quantities
(such as the speed of light) are set equal to 1. The argument for this choice is that all other
quantities should be built from these fundamental units. This system of units is used in high
energy physics and quantum mechanics.
1.5 The Importance of Units

Without units much of our work as scientists would be meaningless. We need to express our
thoughts clearly and units give meaning to the numbers we calculate. Depending on which units
we use, the numbers are different (e.g. 3.8 m and 3800 mm actually represent the same length).
Units are an essential part of the language we use. Units must be specified when expressing
physical quantities. In the case of the curtain example at the beginning of the chapter, the result
of a misunderstanding would simply have been an incorrect amount of material cut. However,
sometimes such misunderstandings have catastrophic results. Here is an extract from a story on
CNN’s website:
(NOTE TO SELF: This quote may need to be removed as the licence we are using allows for
all parts of the document to be copied and I am not sure if this being copied is legit in all ways?)
NASA: Human error caused loss of Mars orbiter November 10, 1999
WASHINGTON (AP) — Failure to convert English measures to metric values caused
the loss of the Mars Climate Orbiter, a spacecraft that smashed into the planet instead
of reaching a safe orbit, a NASA investigation concluded Wednesday.
The Mars Climate Orbiter, a key craft in the space agency’s exploration of the red
planet, vanished after a rocket firing September 23 that was supposed to put the
spacecraft on orbit around Mars.
An investigation board concluded that NASA engineers failed to convert English
measures of rocket thrusts to newton, a metric system measuring rocket force. One
English pound of force equals 4.45 newtons. A small difference between the two
values caused the spacecraft to approach Mars at too low an altitude and the craft
is thought to have smashed into the planet’s atmosphere and was destroyed.
The spacecraft was to be a key part of the exploration of the planet. From its station
about the red planet, the Mars Climate Orbiter was to relay signals from the Mars
Polar Lander, which is scheduled to touch down on Mars next month.
“The root cause of the loss of the spacecraft was a failed translation of English
units into metric units and a segment of ground-based, navigation-related mission
software,” said Arthus Stephenson, chairman of the investigation board.
This story illustrates the importance of being aware that different systems of units exist.
Furthermore, we must be able to convert between systems of units!
6
1.6 Choice of Units
There are no wrong units to use, but a clever choice of units can make a problem look simpler.
The vast range of problems makes it impossible to use a single set of units for everything without
making some problems look much more complicated than they should. We can’t easily compare
the mass of the sun and the mass of an electron, for instance. This is why astrophysicists and
atomic physicists use different systems of units.
We won’t ask you to choose between different unit systems. For your present purposes the SI
system is perfectly sufficient. In some cases you may come across quantities expressed in units
other than the standard SI units. You will then need to convert these quantities into the correct
SI units. This is explained in the next section.
1.7 How to Change Units— the “Multiply by 1” Technique

Firstly you obviously need some relationship between the two units that you wish to convert
between. Let us demonstrate with a simple example. We will consider the case of converting
millimetres (mm) to metres (m)— the SI unit of length. We know that there are 1000mm in
1m which we can write as
1000mm = 1m.
1
Now multiplying both sides by 1000mm we get
1 1
1000mm = 1m,
1000mm 1000mm
which simply gives us
1m
1= .
1000mm
This is the conversion ratio from millimetres to metres. You can derive any conversion ratio in
this way from a known relationship between two units. Let’s use the conversion ratio we have
just derived in an example:
Question: Express 3800mm in metres.
Answer:
3800mm = 3800mm × 1
1m
= 3800mm ×
1000mm
= 3.8m
Note that we wrote every unit in each step of the calculation. By writing them in and
cancelling them properly, we can check that we have the right units when we are finished. We
m
started with ‘mm’ and multiplied by ‘ mm ’. This cancelled the ‘mm’ leaving us with just ‘m’—
the SI unit we wanted to end up with! If we wished to do the reverse and convert metres to
millimetres, then we would need a conversion ratio with millimetres on the top and metres on
the bottom.
7
1.8 How Units Can Help You
We conclude each section of this book with a discussion of the units most relevant to that
particular section. It is important to try to understand what the units mean. That is why
thinking about the examples and explanations of the units is essential.
If we are careful with our units then the numbers we get in our calculations can be checked
in a ‘sanity test’.
1.8.1 What is a ‘sanity test’ ?

This isn’t a special or secret test. All we do is stop, take a deep breath, and look at our answer.
Sure we always look at our answers— or do we? This time we mean stop and really look— does
our answer make sense?
Imagine you were calculating the number of people in a classroom. If the answer you got was
1 000 000 people you would know it was wrong— that’s just an insane number of people to have
in a classroom. That’s all a sanity check is— is your answer insane or not? But what units were
we using? We were using people as our unit. This helped us to make sense of the answer. If we
had used some other unit (or no unit) the number would have lacked meaning and a sanity test
would have been much harder (or even impossible).
It is useful to have an idea of some numbers before we start. For example, let’s consider
masses. An average person has mass 70kg, while the heaviest person in medical history had a
mass of 635kg. If you ever have to calculate a person’s mass and you get 7000kg, this should
fail your sanity check— your answer is insane and you must have made a mistake somewhere.
In the same way an answer of 0.00001kg should fail your sanity test.
The only problem with a sanity check is that you must know what typical values for things
are. In the example of people in a classroom you need to know that there are usually 20–50
people in a classroom. Only then do you know that your answer of 1 000 000 must be wrong.
Here is a table of typical values of various things (big and small, fast and slow, light and heavy—
you get the idea):
Category Quantity Minimum Maximum

Mass
People
Height
Table 1.4: Everyday examples to help with sanity checks
(NOTE TO SELF: Add to this table as we go along with examples from each section.)
Now you don’t have to memorise this table but you should read it. The best thing to do is
to refer to it every time you do a calculation.
1.9 Temperature
We need to make a special mention of the units used to describe temperature. The unit of
temperature listed in Table 1.1 is not the everyday unit we see and use.
Normally the Celsius scale is used to describe temperature. As we all know, Celsius temper-
atures can be negative. This might suggest that any number is a valid temperature. In fact, the
temperature of a gas is a measure of the average kinetic energy of the particles that make up the
gas. As we lower the temperature so the motion of the particles is reduced until a point is reached
8
where all motion ceases. The temperature at which this occurs is called absolute zero. There is
no physically possible temperature colder than this. In Celsius, absolute zero is at −273 o C.
Physicists have defined a new temperature scale called the Kelvin scale. According to this
scale absolute zero is at 0K and negative temperatures are not allowed. The size of one unit
kelvin is exactly the same as that of one unit Celsius. This means that a change in temperature
of 1 degree kelvin is equal to a change in temperature of 1 degree Celsius— the scales just start
in different places. Think of two ladders with steps that are the same size but the bottom most
step on the Celsius ladder is labelled -273, while the first step on the Kelvin ladder is labelled 0.
There are still 100 steps between the points where water freezes and boils.
|----| 102 Celsius |----| 375 Kelvin

|----| 101 Celsius |----| 374 Kelvin
water boils ---> |----| 100 Celsius |----| 373 Kelvin
|----| 99 Celsius |----| 372 Kelvin
|----| 98 Celsius |----| 371 Kelvin
.
.
.
|----| 2 Celsius |----| 275 Kelvin
|----| 1 Celsius |----| 274 Kelvin
ice melts ---> |----| 0 Celsius |----| 273 Kelvin
|----| -1 Celsius |----| 272 Kelvin
|----| -2 Celsius |----| 271 Kelvin
.
.
.
|----| -269 Celsius |----| 4 Kelvin
|----| -270 Celsius |----| 3 Kelvin
|----| -271 Celsius |----| 2 Kelvin
|----| -272 Celsius |----| 1 Kelvin
absolute zero ---> |----| -273 Celsius |----| 0 Kelvin
(NOTE TO SELF: Come up with a decent picture of two ladders with the labels —water
boiling and freezing—in the same place but with different labelling on the steps!)
This makes the conversion from kelvin to Celsius and back very easy. To convert from Cel-
sius to kelvin add 273. To convert from kelvin to Celsius subtract 273. Representing the Kelvin
temperature by TK and the Celsius temperature by To C ,
TK = To C + 273. (1.1)
It is because this conversion is additive that a difference in temperature of 1 degree Celsius
is equal to a difference of 1 kelvin. The majority of conversions between units are multiplicative.
For example, to convert from metres to millimetres we multiply by 1000. Therefore a change
of 1m is equal to a change of 1000mm.
1.10 Scientific Notation, Significant Figures and Rounding

(NOTE TO SELF: still to be written)
9
1.11 Conclusion
In this chapter we have discussed the importance of units. We have discovered that there are
many different units to describe the same thing, although you should stick to SI units in your
calculations. We have also discussed how to convert between different units. This is a skill you
must acquire.
10
Chapter 2
Waves and Wavelike Motion
Waves occur frequently in nature. The most obvious examples are waves in water, on a dam, in
the ocean, or in a bucket. We are most interested in the properties that waves have. All waves
have the same properties so if we study waves in water then we can transfer our knowledge to
predict how other examples of waves will behave.
2.1 What are waves?

Waves are disturbances which propagate (move) through a medium 1 . Waves can be viewed as
a transfer energy rather than the movement of a particle. Particles form the medium through
which waves propagate but they are not the wave. This will become clearer later.
Lets consider one case of waves: water waves. Waves in water consist of moving peaks and
troughs. A peak is a place where the water rises higher than when the water is still and a trough
is a place where the water sinks lower than when the water is still. A single peak or trough we
call a pulse. A wave consists of a train of pulses.
So waves have peaks and troughs. This could be our first property for waves. The following
diagram shows the peaks and troughs on a wave.
Peaks
Troughs
In physics we try to be as quantitative as possible. If we look very carefully we notice that

the height of the peaks above the level of the still water is the same as the depth of the troughs
below the level of the still water. The size of the peaks and troughs is the same.
2.1.1 Characteristics of Waves : Amplitude

The characteristic height of a peak and depth of a trough is called the amplitude of the wave.
The vertical distance between the bottom of the trough and the top of the peak is twice the
amplitude. We use symbols agreed upon by convention to label the characteristic quantities of
1 Light is a special case, it exhibits wave-like properties but does not require a medium through which to
propagate.
11
the waves. Normally the letter A is used for the amplitude of a wave. The units of amplitude
are metres (m).
Amplitude
2 x Amplitude
Amplitude
Worked Example 1
Question: (NOTE TO SELF: Make this a more exciting question) If the peak of a
wave measures 2m above the still water mark in the harbour what is the amplitude
of the wave?
Answer: The definition of the amplitude is the height that the water rises to above
when it is still. This is exactly what we were told, so the answer is that the amplitude
is 2m.
2.1.2 Characteristics of Waves : Wavelength

Look a little closer at the peaks and the troughs. The distance between two adjacent (next to
each other) peaks is the same no matter which two adjacent peaks you choose. So there is a
fixed distance between the peaks.
Looking closer you’ll notice that the distance between two adjacent troughs is the same no
matter which two troughs you look at. But, more importantly, its is the same as the distance
between the peaks. This distance which is a characteristic of the wave is called the wavelength.
Waves have a characteristic wavelength. The symbol for the wavelength is λ. The units are
metres (m).
λ
λ
The wavelength is the distance between any two adjacent points which are in phase. Two
points in phase are separate by an integer (0,1,2,3,...) number of complete wave cycles. They
don’t have to be peaks or trough but they must be separated by a complete number of waves.
2.1.3 Characteristics of Waves : Period

Now imagine you are sitting next to a pond and you watch the waves going past you. First one
peak, then a trough and then another peak. If you measure the time between two adjacent peaks
you’ll find that it is the same. Now if you measure the time between two adjacent troughs you’ll
12
find that its always the same, no matter which two adjacent troughs you pick. The time you
have been measuring is the time for one wavelength to pass by. We call this time the period and
it is a characteristic of the wave.
Waves have a characteristic time interval which we call the period of the wave and denote
with the symbol T. It is the time it takes for any two adjacent points which are in phase to pass
a fixed point. The units are seconds (s).
2.1.4 Characteristics of Waves : Frequency

There is another way of characterising the time interval of a wave. We timed how long it takes
for one wavelength to pass a fixed point to get the period. We could also turn this around and
say how many waves go by in 1 second.
We can easily determine this number, which we call the frequency and denote f. To determine
the frequency, how many waves go by in 1s, we work out what fraction of a waves goes by in 1
second by dividing 1 second by the time it takes T. If a wave takes 12 a second to go by then in
1 second two waves must go by. 11 = 2. The unit of frequency is the Hz or s−1 .
2
Waves have a characteristic frequency.
1
f= T
f : frequency (Hz or s−1 )

T : period (s)
2.1.5 Characteristics of Waves : Speed

Now if you are watching a wave go by you will notice that they move at a constant velocity. The
speed is the distance you travel divided by the time you take to travel that distance. This is
excellent because we know that the waves travel a distance λ in a time T. This means that we
can determine the speed.
λ
v= T
v : speed (m.s−1 )
λ : wavelength (m)
T : period (s)
There are a number of relationships involving the various characteristic quantities of waves.
A simple example of how this would be useful is how to determine the velocity when you have the
frequency and the wavelength. We can take the above equation and substitute the relationship
between frequency and period to produce an equation for speed of the form
v = fλ
v : speed (m.s−1 )
λ : wavelength (m)
f : frequency (Hz or s−1 )
Is this correct? Remember a simple first check is to check the units! On the right hand
side we have velocity which has units ms−1 . On the left hand side we have frequency which is
13
measured in s−1 multiplied by wavelength which is measure in m. On the left hand side we have
ms−1 which is exactly what we want.
2.2 Two Types of Waves

We agreed that a wave was a moving set of peaks and troughs and we used water as an example.
Moving peaks and troughs, with all the characteristics we described, in any medium constitute a
wave. It is possible to have waves where the peaks and troughs are perpendicular to the direction
of motion, like in the case of water waves. These waves are called transverse waves.
There is another type of wave. Called a longitudinal wave and it has the peaks and troughs
in the same direction as the wave is moving. The question is how do we construct such a wave?
An example of a longitudinal wave is a pressure wave moving through a gas. The peaks in
this wave are places where the pressure reaches a peak and the troughs are places where the
pressure is a minimum.
In the picture below we show the random placement of the gas molecules in a tube. The
piston at the end moves into the tube with a repetitive motion. Before the first piston stroke
the pressure is the same throughout the tube.
P i
JL 4 K
H +r [7 A j Q m v ( c > / ` e z B ] X # ;2 D } f & s!3 U q % ^0 ) ? t x 5 M - h WGn E O. u $ d@b Zow Yk | g*C : ' 6 8, ~ _ \
9 { N = p S F
R V y T a1 < I l "
When the piston moves in it compresses the gas molecules together at the end of the tube.
If the piston stopped moving the gas molecules would all bang into each other and the pressure
would increase in the tube but if it moves out again fast enough then pressure waves can be set
up.
èÛ À å ä ÿø º Ô¿ìù ¹ é Â Éá
» Þ«
-
M <+Q O&J! 0 ' K%2UWH S A) #V N 9 T "= @
È ó £ ¤¯ ú ¡ ï ß× © ö ½ þ Ð®Ò² ç ôÏ ° ³ ± Ã
Í Ì ª ´ Ü ¶ Õ ¸ Ý Á ð ñ î Ê ¼ ¦ ë ¾¨Ö ý Å û ¢ Ó§ Ùê Ë Ú Ñ · ò Æ
â ü ÷ Ç µÎ
7 I1 8.F E 46P* :,5 C(B 3 > LR?/ G D$
; ã¥ ¬ àØ æõ í Ä
When the piston moves out again before the molecules have time to bang around then the
increase in pressure moves down the tube like a pulse (single peak). The piston moves out so
fast that a pressure trough is created behind the peak.
n ãö ë Ú Ù Ò ï × û ìí÷ ¦[\ l p a ¿ ¸¶ Y j ´ ¤ £ f
o Å¡ Í ¯ Ç w Ã Z ª þøñó ÝßçéÞ ÿè å
t ÕôÑ Ð
ú ¥ò µ Ûü æ Ô õ î ÖØ ý x |} Á ¢ q ½ Â Æ È d u ° m « ] yÊ
^ { ³ v · Ë ® º
bÌ ¹ ¾ s àâ
ä ê zù Ü ág ð X k © ~ § c_ ± ÎÏ É
r
Ó e ¨ ¬Ä ² ` h ¼i À »
As this repeats we get waves of increased and decreased pressure moving down the tubes. We
can describe these pulses of increased pressure (peaks in the pressure) and decreased pressure
(troughs of pressure) by a sine or cosine graph.
£ À¾ µ® º Ç¯· ¦¨
¥ W ÂÄ C ¹ © }Ã ( Z1 T < ÷Í âË .ÿ á M ä ðã ëç × øÐ é æÒ O | G ? 6 L 8 U 0 s : l A y 3 K ; / )
Á ¸ ÉH ½¤ ²« `³ ± Æ Å¶§~ J V @ _ v ÖÎ ÏÑ
õ Ü åï þ ú Ø í üßÌ Ó ! 4 t , o g Q f
+ ' " 7 E Y m b k I 5 a B e p > % d \ q - h2 =

¼ ª ¿ ´ ¢{ ¡ z ° ¬ È » [ Ê öÔî è ìêù ò ýcÙ óôñ ] Ýj Ú*ÞÛ P û Õà D X u i $ F & S #

w n^ x9 N r R
14
There are a number of examples of each type of wave. Not all can be seen with the naked
eye but all can be detected.
2.3 Properties of Waves

We have discussed some of the simple characteristics of waves that we need to know. Now we
can progress onto some more interesting and, perhaps, less intuitive properties of waves.
2.3.1 Properties of Waves : Reflection

When waves strike a barrier they are reflected. This means that waves bounce off things. Sound
waves bounce off walls, light waves bounce off mirrors, radar waves bounce off planes and it can
explain how bats can fly at night and avoid things as small as telephone wires. The property of
reflection is a very important and useful one.
(NOTE TO SELF: Get an essay by an air traffic controller on radar) (NOTE TO SELF: Get
an essay by on sonar usage for fishing or for submarines)
When waves are reflected, the process of reflection has certain properties. If a wave hits an
obstacle at a right angle to the surface (NOTE TO SELF: diagrams needed) then the wave is
reflected directly backwards.
If the wave strikes the obstacle at some other angle then it is not reflected directly backwards.
The angle that the waves arrives at is the same as the angle that the reflected waves leaves at.
The angle that waves arrives at or is incident at equals the angle the waves leaves at or is reflected
at. Angle of incidence equals angle of reflection
θi = θ r (2.1)
15
θi = θ r
θi : angle of incidence
θr : angle of reflection
θi θr
In the optics chapter you will learn that light is a wave. This means that all the properties we
have just learnt apply to light as well. Its very easy to demonstrate reflection of light with a
mirror. You can also easily show that angle of incidence equals angle of reflection.
If you look directly into a mirror your see yourself reflected directly back but if you tilt the
mirror slightly you can experiment with different incident angles.
Phase shift of reflected wave

When a wave is reflected from a more dense medium it undergoes a phase shift. That means
that the peaks and troughs are swapped around.
The easiest way to demonstrate this is to tie a piece of string to something. Stretch the string
out flat and then flick the string once so a pulse moves down the string. When the pulse (a single
peak in a wave) hits the barrier that the string is tide to it will be reflected. The reflected wave
will look like a trough instead of a peak. This is because the pulse had undergone a phase change.
The fixed end acts like an extremely dense medium.
If the end of the string was not fixed, i.e. it could move up and down then the wave would
still be reflected but it would not undergo a phase shift. To draw a free end we draw it as a
ring around a line. This signifies that the end is free to move.
16
2.3.2 Properties of Waves : Refraction
Sometimes waves move from one medium to another. The medium is the substance that is
carrying the waves. In our first example this was the water. When the medium properties
change it can affect the wave.
Let us start with the simple case of a water wave moving from one depth to another. The
speed of the wave depends on the depth 2 . If the wave moves directly from the one medium to
the other then we should look closely at the boundary. When a peak arrives at the boundary
and moves across it must remain a peak on the other side of the boundary. This means that
the peaks pass by at the same time intervals on either side of the boundary. The period and
frequency remain the same! But we said the speed of the wave changes, which means that the
distance it travels in one time interval is different i.e. the wavelength has changed.
Going from one medium to another the period or frequency does not change only the wave-
length can change.
Now if we consider a water wave moving at an angle of incidence not 90 degrees towards a
change in medium then we immediately know that not the whole wavefront will arrive at once.
So if a part of the wave arrives and slows down while the rest is still moving faster before it
arrives the angle of the wavefront is going to change. This is known as refraction. When a wave
bends or changes its direction when it goes from one medium to the next.
If it slows down it turns towards the perpendicular.
2
17
Air
Water
If the wave speeds up in the new medium it turns away from the perpendicular to the medium
surface.
Air
Water
When you look at a stick that emerges from water it looks like it is bent. This is because the
light from below the surface of the water bends when it leaves the water. Your eyes project the
light back in a straight line and so the object looks like it is a different place.
18
Air
Water
2.3.3 Properties of Waves : Interference

If two waves meet interesting things can happen. Waves are basically collective motion of parti-
cles. So when two waves meet they both try to impose their collective motion on the particles.
This can have quite different results.
If two identical (same wavelength, amplitude and frequency) waves are both trying to form
a peak then they are able to achieve the sum of their efforts. The resulting motion will be a
peak which has a height which is the sum of the heights of the two waves. If two waves are both
trying to form a trough in the same place then a deeper trough is formed, the depth of which is
the sum of the depths of the two waves. Now in this case the two waves have been trying to do
the same thing and so add together constructively. This is called constructive interference.
A=0.5
B=1
A+B=1.5
If one wave is trying to form a peak and the other is trying to form a trough then they are
competing to do different things. In this case they can cancel out. The amplitude of the resulting
19
wave will depend on the amplitudes of the two waves that are interfering. If the depth of the
trough is the same as the height of the peak nothing will happen. If the height of the peak is
bigger than the depth of the trough a smaller peak will appear and if the trough is deeper then
a less deep trough will appear. This is destructive interference.
A=0.5
B=1
B-A=0.5
2.3.4 Properties of Waves : Standing Waves

When two waves move in opposite directions, through each other, interference takes place. If
the two waves have the same frequency and wavelength then a specific type of constructive
interference can occur: standing waves can form.
Standing waves are disturbances which don’t appear to move, they look like they stay in the
same place even though the waves that from them are moving. Lets demonstrate exactly how
this comes about. Imagine a long string with waves being sent down it from either end. The
waves from both ends have the same amplitude, wavelength and frequency as you can see in the
picture below:
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
To stop from getting confused between the two waves we’ll draw the wave from the left with
a dashed line and the one from the right with a solid line. As the waves move closer together
when they touch both waves have an amplitude of zero:
20
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
If we wait for a short time the ends of the two waves move past each other and the waves
overlap. Now we know what happens when two waves overlap, we add them together to get the
resulting wave.
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
Now we know what happens when two waves overlap, we add them together to get the
resulting wave. In this picture we show the two waves as dotted lines and the sum of the two in
the overlap region is shown as a solid line:
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
The important thing to note in this case is that there are some points where the two waves
always destructively interfere to zero. If we let the two waves move a little further we get the
picture below:
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
Again we have to add the two waves together in the overlap region to see what the sum of
the waves looks like.
1
-1
-5 -4 -3 -2 -1 0 1 2 3 4 5
In this case the two waves have moved half a cycle past each other but because they are out
of phase they cancel out completely. The point at 0 will always be zero as the two waves move
past each other.
21
When the waves have moved past each other so that they are overlapping for a large region
the situation looks like a wave oscillating in place. If we focus on the range -4, 4 once the waves
have moved over the whole region. To make it clearer the arrows at the top of the picture
show peaks where maximum positive constructive interference is taking place. The arrows at the
bottom of the picture show places where maximum negative interference is taking place.
1
-1
-4 -3 -2 -1 0 1 2 3 4
As time goes by the peaks become smaller and the troughs become shallower but they do not
move.
1
-1
-4 -3 -2 -1 0 1 2 3 4
For an instant the entire region will look completely flat.
1
-1
-4 -3 -2 -1 0 1 2 3 4
The various points continue their motion in the same manner.
1
-1
-4 -3 -2 -1 0 1 2 3 4
Eventually the picture looks like the complete reflection through the x-axis of what we started
with:
1
-1
-4 -3 -2 -1 0 1 2 3 4
Then all the points begin to move back. Each point on the line is oscillating up and down
with a different amplitude.
22
1
-1
-4 -3 -2 -1 0 1 2 3 4
If we superimpose the two cases where the peaks were at a maximum and the case where the
same waves were at a minimum we can see the lines that the points oscillate between. We call
this the envelope of the standing wave as it contains all the oscillations of the individual points.
A node is a place where the two waves cancel out completely as two waves destructively interfere
in the same place. An anti-node is a place where the two waves constructively interfere.
Important: The distance between two anti-nodes is only 12 λ because it is the distance from
a peak to a trough in one of the waves forming the standing wave. It is the same as the distance
between two adjacent nodes. This will be important when we workout the allowed wavelengths
in tubes later. We can take this further because half-way between any two anti-nodes is a node.
Then the distance from the node to the anti-node is half the distance between two anti-nodes.
This is half of half a wavelength which is one quarter of a wavelength, 14 λ.
Anti-nodes
Nodes
To make the concept of the envelope clearer let us draw arrows describing the motion of
points along the line.
Every point in the medium containing a standing wave oscillates up and down and the
amplitude of the oscillations depends on the location of the point. It is convenient to draw the
envelope for the oscillations to describe the motion. We cannot draw the up and down arrows
for every single point!
Reflection from a fixed end

If waves are reflected from a fixed end, for example tieing the end of a rope to a pole and then
sending waves down it. The fixed end will always be a node. Remember: Waves reflected from
a fixed end undergo a phase shift.
The wavelength, amplitude and speed of the wave cannot affect this, the fixed end is always
a node.
Reflection from an open end

If waves are reflected from end, which is free to move, it is an anti-node. For example tieing the
end of a rope to a ring, which can move up and down, around the pole. Remember: The waves
sent down the string are reflected but do not suffer a phase shift.
23
Wavelengths of standing waves with fixed and open ends
There are many applications which make use of the properties of waves and the use of fixed and
free ends. Most musical instruments rely on the basic picture that we have presented to create
specific sounds, either through standing pressure waves or standing vibratory waves in strings.
The key is to understand that a standing wave must be created in the medium that is
oscillating. There are constraints as to what wavelengths can form standing waves in a medium.
For example, if we consider a tube of gas it can have
• both ends open (Case 1)
• one end open and one end closed (Case 2)
• both ends closed (Case 3).
Each of these cases is slightly different because the open or closed end determines whether a
node or anti-node will form when a standing wave is created in the tube. These are the primary
constraints when we determine the wavelengths of potential standing waves. These constraints
must be met.
In the diagram below you can see the three cases different cases. It is possible to create
standing wave with different frequencies and wavelengths as long as the end criteria are met.
Case 1 Case 2 Case 3

L L L
The longer the wavelength the less the number of anti-nodes in the standing waves. We
cannot have a standing wave with 0 no anti-nodes because then there would be no oscillations.
We use n to number to anti-nodes. If all of the tubes have a length L and we know the end
constraints we can workout the wavelenth, λ, for a specific number of anti-nodes.
Lets workout the longest wavelength we can have in each tube, i.e. the case for n = 1.
λ = 2L λ = 4L
n=1
Case 1: In the first tube both ends must be nodes so we can place one anti-node in the
middle of the tube. We know the distance from one node to another is 12 λ and we also know this
distance is L. So we can equate the two and solve for the wavelength:
1
λ = L
2
λ = 2L
Case 2: In the second tube one ends must be a node and the other must be an anti-node.
We are looking at the case with one anti-node we we are forced to have it at the end. We know
the distance from one node to another is 12 λ but we only have half this distance contained in the
tube. So :
1 1
( λ) = L
2 2
λ = 4L
24
Case 3: Here both ends are closed and so we must have two nodes so it is impossible to
construct a case with only one node.
NB: If you ever
Next we determine which wavelengths could be formed if we had two nodes. Remember that
a longer wavel
we are dividing the tube up into smaller and smaller segments by having more nodes so we expect
for more node
the wavelengths to get shorter.
have made a m
Remember to c
λ=L λ = 43 L λ = 2L your answers ma
n=2
Case 1: Both ends are open and so they must be anti-nodes. We can have two nodes inside
the tube only if we have one anti-node contained inside the tube and one on each end. This
means we have 3 anti-nodes in the tube. The distance between any two anti-nodes is half a
wavelength. This means there is half wavelength between the left side and the middle and
another half wavelength between the middle and the right side so there must be one wavelength
inside the tube. The safest thing to do is workout how many half wavelengths there are and
equate this to the length of the tube L and then solve for λ.
Even though its very simple in this case we should practice our technique:
1
2( λ) = L
2
λ = L
Case 2: We want to have two nodes inside the tube. The left end must be a node and the
right end must be an anti-node. We can have one node inside the tube as drawn above. Again
we can count the number of distances between adjacent nodes or anti-nodes. If we start from the
left end we have one half wavelength between the end and the node inside the tube. The distance
from the node inside the tube to the right end which is an anti-node is half of the distance to
another node. So it is half of half a wavelength. Together these add up to the length of the tube:
1 1 1
λ + ( λ) = L
2 2 2
2 1
λ+ λ = L
4 4
3
λ = L
4
4
λ = L
3
Case 3: In this case both ends have to be nodes. This means that the length of the tube is
one half wavelength: So we can equate the two and solve for the wavelength:
1
λ = L
2
λ = 2L
To see the complete pattern for all cases we need to check what the next step for case 3 is
when we have an additional node. Below is the diagram for the case where n=3.
λ = 32 L λ = 45 L λ=L
n=3
25
Case 1: Both ends are open and so they must be anti-nodes. We can have three nodes
inside the tube only if we have two anti-node contained inside the tube and one on each end.
This means we have 4 anti-nodes in the tube. The distance between any two anti-nodes is half
a wavelength. This means there is half wavelength between every adjacent pair of anti-nodes.
We count how many gaps there are between adjacent anti-nodes to determine how many half
wavelengths there are and equate this to the length of the tube L and then solve for λ.
1
3( λ) = L
2
2
λ = L
3
Case 2: We want to have three nodes inside the tube. The left end must be a node and the
right end must be an anti-node, so there will be two nodes between the ends of the tube. Again
we can count the number of distances between adjacent nodes or anti-nodes, together these add
up to the length of the tube. Remember that the distance between the node and an adjacent
anti-node is only half the distance between adjacent nodes. So starting from the left end we 3
nodes so 2 half wavelength intervals and then only a node to anti-node distance:
1 1 1
2( λ) + ( λ) = L
2 2 2
1
λ+ λ = L
4
5
λ = L
4
4
λ = L
5
Case 3: In this case both ends have to be nodes. With one node in between there are two
sets of adjacent nodes. This means that the length of the tube consists of two half wavelength
sections:
1
2( λ) = L
2
λ = L
2.3.5 Beats
If the waves that are interfering are not identical then the waves form a modulated pattern with
a changing amplitude. The peaks in amplitude are called beats. If you consider two sound waves
interfering then you hear sudden beats in loudness or intensity of the sound.
The simplest illustration is two draw two different waves and then add them together. You
can do this mathematically and draw them yourself to see the pattern that occurs.
Here is wave 1:
26
Now we add this to another wave, wave 2:
When the two waves are added (drawn in coloured dashed lines) you can see the resulting wave
pattern:
To make things clearer the resulting wave without the dashed lines is drawn below. Notice that
the peaks are the same distance apart but the amplitude changes. If you look at the peaks they
are modulated i.e. the peak amplitudes seem to oscillate with another wave pattern. This is
what we mean by modulation.
2Amin
2Amax
The maximum amplitude that the new wave gets to is the sum of the two waves just like for
constructive interference. Where the waves reach a maximum it is constructive interference.
The smallest amplitude is just the difference between the amplitudes of the two waves, exactly
like in destructive interference.
The beats have a frequency which is the difference between the frequency of the two waves
that were added. This means that the beat frequency is given by
fB = |f1 − f2 | (2.2)
fB = |f1 − f2 |
fB : beat frequency (Hz or s−1 )

f1 : frequency of wave 1 (Hz or s−1 )
f2 : frequency of wave 2 (Hz or s−1 )
27
2.3.6 Properties of Waves : Diffraction
One of the most interesting, and also very useful, properties of waves is diffraction. When a
wave strikes a barrier with a hole only part of the wave can move through the hole. If the hole is
similar in size to the wavelength of the wave diffractions occurs. The waves that comes through
the hole no longer looks like a straight wave front. It bends around the edges of the hole. If the
hole is small enough it acts like a point source of circular waves.
This bending around the edges of the hole is called diffraction. To illustrate this behaviour
we start by with Huygen’s principle.
Huygen’s Principle
Huygen’s principle states that each point on a wavefront acts like a point source or circular
waves. The waves emitted from each point interfere to form another wavefront on which each
point forms a point source. A long straight line of points emitting waves of the same frequency
leads to a straight wave front moving away.
To understand what this means lets think about a whole lot of peaks moving in the same
direction. Each line represents a peak of a wave.
If we choose three points on the next wave front in the direction of motion and make each of
them emit waves isotropically (i.e. the same in all directions) we will get the sketch below:
What we have drawn is the situation if those three points on the wave front were to emit waves
of the same frequency as the moving wave fronts. Huygens principle says that every point on the
wave front emits waves isotropically and that these waves interfere to form the next wave front.
To see if this is possible we make more points emit waves isotropically to get the sketch below:
28
You can see that the lines from the circles (the peaks) start to overlap in straight lines. To make
this clear we redraw the sketch with dashed lines showing the wavefronts which would form. Our
wavefronts are not perfectly straight lines because we didn’t draw circles from every point. If we
had it would be hard to see clearly what is going on.
Huygen’s principle is a method of analysis applied to problems of wave propagation. It

recognizes that each point of an advancing wave front is in fact the center of a fresh disturbance
and the source of a new train of waves; and that the advancing wave as a whole may be regarded
as the sum of all the secondary waves arising from points in the medium already traversed.
This view of wave propagation helps better understand a variety of wave phenomena, such as
diffraction.
Wavefronts Moving Through an Opening

Now if allow the wavefront to impinge on a barrier with a hole in it, then only the points on the
wavefront that move into the hole can continue emitting forward moving waves - but because a
lot of the wavefront have been removed the points on the edges of the hole emit waves that bend
round the edges.
29
The wave front that impinges (strikes) the wall cannot continue moving forward. Only the
points moving into the gap can. If you employ Huygens’ principle you can see the effect is that
the wavefronts are no longer straight lines.
For example, if two rooms are connected by an open doorway and a sound is produced in a
remote corner of one of them, a person in the other room will hear the sound as if it originated
at the doorway. As far as the second room is concerned, the vibrating air in the doorway is the
source of the sound. The same is true of light passing the edge of an obstacle, but this is not as
easily observed because of the short wavelength of visible light.
This means that when waves move through small holes they appear to bend around the sides
because there aren’t enough points on the wavefront to form another straight wavefront. This is
bending round the sides we call diffraction.
2.3.7 Properties of Waves : Dispersion

Dispersion is a property of waves where the speed of the wave through a medium depends on
the frequency. So if two waves enter the same dispersive medium and have different frequencies
they will have different speeds in that medium even if they both entered with the same speed.
We will come back to this topic in optics.
2.4 Practical Applications of Waves: Sound Waves

2.4.1 Doppler Shift
The Doppler shift is an effect which becomes apparent when the source of sound waves or the
person hearing the sound waves is moving. In this case the frequency of the sounds waves can
30
be different.
This might seem strange but you have probably experienced the doppler effect in every day
life. When would you notice it. The effect depends on whether the source of the sound is moving
away from the listener or if it is moving towards the listener. If you stand at the side fo the road
or train tracks then a car or train driving by will at first be moving towards you and then away.
This would mean that we would experience the biggest change in the effect.
We said that it effects the frequency of the sound so the sounds from the car or train would
sound different, have a different frequency, when the car is coming towards you and when it is
moving away from you.
Why does the frequency of the sound change when the car is moving towards or away from
you? Lets convince ourselves that it must change!
Imagine a source of sound waves with constant frequency and amplitude. Just like each of
the points on the wave front from the Huygen’s principle section.
Remember the sound waves are disturbances moving through the medium so if the source
moves or stops after the sound has been emitted it can’t affect the waves that have been emitted
already.
The Doppler shift happens when the source moves while emitting waves. So lets imagine we
have the same source as above but now its moving to the right. It is emitting sound at a constant
frequency and so the time between peaks of the sound waves will be constant but the position
will have moved to the right.
In the picture below we see that our sound source (the black circle) has emitted a peak which
moves away at the same speed in all directions. The source is moving to the right so it catches
up a little bit with the peak that is moving away to the right.
31
When the second peak is emitted it is from a point that has moved to the right. This means
that the new or second peak is closer to the first peak on the right but further away from the
first peak on the left.
If the source continues moving at the same speed in the same direction (i.e. with the same
velocity which you will learn more about later). then the distance between peaks on the right of
the source is the constant. The distance between peaks on the left is also constant but they are
different on the left and right.
This means that the time between peaks on the right is less so the frequency is higher. It is
higher than on the left and higher than if the source were not moving at all.
On the left hand side the peaks are further apart than on the right and further apart than if
the source were at rest - this means the frequency is lower.
So what happens when a car drives by on the freeway is that when it approaches you hear
higher frequency sounds and then when it goes past you it is moving away so you hear a lower
frequency.
2.4.2 Mach Cone

Now we know that the waves move away from the source at the speed of sound. What happens
if the source moves at the speed of sound?
This means that the wave peaks on the right never get away from the source so each wave is
emitted on top of the previous on on the right hand side like in the picture below.
32
If the source moves faster than the speed of sound a cone of wave fronts is created. This is
called a Mach cone. Sometimes we use the speed of sound as a reference to describe the speed
of the object. So if the object moves at exactly the speed of sound we can say that it moves at
1 times the speed of sound. If it moves at double the speed of sound then we can say that it
moves at 2 times the speed of sound. A convention for this is to use Mach numbers, so moving
at the speed of sound is Mach one (one times the speed of sound) and moving at twice the speed
of sound is called Mach two (twice the speed of sound).
2.4.3 Ultra-Sound
Ultrasound is sound with a frequency greater than the upper limit of human hearing, approxi-
mately 20 kilohertz. Some animals, such as dogs, dolphins, and bats, have an upper limit that
is greater than that of the human ear and can hear ultrasound.
Ultrasound has industrial and medical applications. Medical ultrasonography can visualise
muscle and soft tissue, making them useful for scanning the organs, and obstetric ultrasonography
is commonly used during pregnancy. Typical diagnostic ultrasound scanners operate in the
frequency range of 2 to 13 megahertz. More powerful ultrasound sources may be used to generate
local heating in biological tissue, with applications in physical therapy and cancer treatment.
Focused ultrasound sources may be used to break up kidney stones.
Ultrasonic cleaners, sometimes called supersonic cleaners, are used at frequencies from 20-40
kHz for jewellery, lenses and other optical parts, watches, dental instruments, surgical instruments
and industrial parts.
These cleaners consist of containers with a fluid in which the object to be cleaned is placed.
Ultrasonic waves are then sent into the fluid. The main mechanism for cleaning action in an
ultrasonic cleaner is actually the energy released from the collapse of millions of microscopic
cavitation events occurring in the liquid of the cleaner.
33
Interesting Ultrasound generator/speaker systems are sold with claims that they frighten away rodents
Fact: and insects, but there is no scientific evidence that the devices work; controlled tests have
shown that rodents quickly learn that the speakers are harmless.
Medical Ultrasonography
Medical ultrasonography makes uses the fact that waves are partially reflected when the medium
in which they are moving changes density.
If the density increases then the reflected waves undergoes a phase shift exactly like the case
where the waves in a string were reflected from a fixed end. If the density decreases then the
reflected waves has the same phase exactly like the case where the waves in a string were reflected
from a free end.
Combining these properties of waves with modern computing technology has allowed medical
professionals to develop an imaging technology to help with many aspects of diagnosis. Typical
ultrasound units have a hand-held probe (often called a scan head) that is placed directly on and
moved over the patient: a water-based gel ensures good contact between the patient and scan
head.
Ultrasonic waves are emitted from the scan head and sent into the body of the patient.
The scan head also acts a receiver for reflected waves. From detailed knowledge of interference
and reflection an image of the internal organs can be constructed on a screen by a computer
programmed to process the reflected signals.
Interesting Medical ultrasonography was invented in 1953 at Lund University by cardiologist Inge
Fact: Edler and Carl Hellmuth Hertz, the son of Gustav Ludwig Hertz, who was a graduate
student at the department for nuclear physics.
Uses
Ultrasonography is widely utilized in medicine, primarily in gastroenterology, cardiology,
gynaecology and obstetrics, urology and endocrinology. It is possible to perform diagnosis or
therapeutic procedures with the guidance of ultrasonography (for instance biopsies or drainage
of fluid collections).
Strengths of ultrasound imaging
• It images muscle and soft tissue very well and is particularly useful for finding the interfaces
between solid and fluid-filled spaces.
• It renders ”live” images, where the operator can dynamically select the most useful section
for diagnosing and documenting changes, often enabling rapid diagnoses.
• It shows the structure as well as some aspects of the function of organs.
34
• It has no known long-term side effects and rarely causes any discomfort to the patient.
• Equipment is widely available and comparatively flexible; examinations can be performed

at the bedside.
• Small, easily carried scanners are available.
• Much cheaper than many other medical imaging technology.
Weaknesses of ultrasound imaging
• Ultrasound has trouble penetrating bone and performs very poorly when there is air be-
tween the scan head and the organ of interest. For example, overlying gas in the gastroin-
testinal tract often makes ultrasound scanning of the pancreas difficult.
• Even in the absence of bone or air, the depth penetration of ultrasound is limited, making
it difficult to image structures that are far removed from the body surface, especially in
obese patients.
• The method is operator-dependent. A high level of skill and experience is needed to acquire
good-quality images and make accurate diagnoses.
Doppler ultrasonography
Ultrasonography can be enhanced with Doppler measurements, which employ the Doppler
effect to assess whether structures (usually blood) are moving towards or away from the probe.
By calculating the frequency shift of a particular sample volume, e.g. within a jet of blood flow
over a heart valve, its speed and direction can be determined and visualised. This is particularily
useful in cardiovascular studies (ultrasonography of the vasculature and heart) and essential in
many areas such as determining reverse blood flow in the liver vasculature in portal hypertension.
The Doppler information is displayed graphically using spectral Doppler, or as an image using
colour Doppler or power Doppler. It is often presented audibly using stereo speakers: this
produces a very distinctive, despite synthetic, sound.
2.5 Important Equations and Quantities

Frequency:
1
f= . (2.3)
T
Quantity Symbol S.I. Units Direction

Amplitude A m —
Period T s —
Wavelength λ m —
Frequency f Hz or s−1 —
Speed v m.s−1 —
Table 2.1: Units used in Waves
35
Speed:
v = fλ
λ
=
T
36
Chapter 3
Geometrical Optics
In this chapter we will study geometrical optics. Optics is the branch of physics that describes
the behavior and properties of light and the interaction of light with matter. By geometrical
optics we mean that we will study all the optics that we can treat using geometrical analysis
(geometry), i.e. lines, angles and circles.
As we have seen in the previous chapters, light propagates as a wave. The waves travel in
straight lines from the source. So we will consider light as a set of rays. The wavelike nature will
become apparent when the waves go from one medium to another. Using rays and Snell’s law to
describe what happens when the light ray moves from one medium to another we can solve all
the geometrical optics problems in this chapter.
3.1 Refraction re-looked

We have seen that waves refract as they move from shallower to deeper water or vise versa, thus
light also refracts as it moves between two mediums of different densities.
We may consider the parallel beams of light in Fig 1(a) as a set of wheels connected by
a straight rod placed through their centres as in Fig1(b). As the wheels roll onto the grass
(representing higher density), they begin to slow down, while those still on the tarmac move at
a relatively faster speed. This shifts the direction of movtion towards the normal of the grass-
tarmac barrier. Likewise light moving from a medium of low density to a medium of high density
(Fig 2) moves towards the normal, hence the angle of incidence (i) is greater than the angle of
Refraction (r): i ¿ r for d1 ¡ d2
(NOTE TO SELF: Diagram of ray moving into more dense medium) (NOTE TO SELF:
Discussion of Snell’s Law) (NOTE TO SELF: Follow by discussion of how we can reverse rays)
(NOTE TO SELF: Show its all the same)
37
where both angles are measured from the normal to the ray. I is the incident ray and R is
the refracted ray.
Rays are reversible
3.1.1 Apparent and Real Depth:

If you submerge a straight stick in water and look at the stick where it passes through the surface
of the water you will notice that it looks like the stick bends. If you remove you will see that the
stick did not bend. The bending of the stick is a very common example of refraction.
How can we explain this? We can start with a simple object under water. We can see things
because light travels from the object into our eyes where it is absorbed and sent to the brain
for processing. The human brain interprets the information it receives using the fact that light
travels in straight lines. This is why the stick looks bent. The light did not travel in a straight
line from the stick underwater to your eye. It was refracted at the surface. Your brain assumes
the light travelled in a straight line and so it intrepets the information so that it thinks the stick
is in a different place.
This phenomenon is easily explained using ray diagrams as in Fig??. The real light rays
are represented with a solid line while dashed lines depict the virtual rays. The real light rays
undergo refraction at the surface of the water hence move away from the normal. However the
eye assumes that light rays travel in straight lines, thus we extend the refracted rays until they
converge to a point. These are virtual rays as in reality the light was refracted and did not
originate from that point.
38
air
water
(NOTE TO SELF: Insert an example with water - can be worked example!)

We note that the image of is seen slightly higher and ahead of the object. Where would we
see the object if it was submerged in a fluid denser than water?
(NOTE TO SELF: Insert an example with denser medium show change - can be worked
example!)
3.1.2 Splitting of White Light

How is a rainbow formed? White is a combination of all other colours of light. Each colour has
a different wavelength and is thus diffracted through different angles.
red yellow blue
The splitting of white light into its component colours may be demonstrated using a triangular
prism (Fig4). White light is incident on the prism. As the white light enters the glass its
component colours are diffracted through different angles. This separation is further expanded
as the light rays leave the prism. Why? What colour is diffracted the most? If red has the longest
wavelength and violet the shortest, what is the relation between refraction and wavelength?
As the sun appears after a rainstorm, droplets of water still remain in the atmosphere. These
act as tiny prisms that split the suns light up into its component colours forming a rainbow.
39
red
white light yellow
blue
3.1.3 Total Internal Reflection

Another useful application of refraction is the periscope. We know that as light move from higher
to lower density mediums, light rays tend to be diffracted towards the normal. We also know
that the angle of refraction is greater than the angle of incidence and increases as we increase the
angle of incidence (Fig 5(a),(b)). At a certain angle of incidence, c, the refracted angle equals
90o (Fig 5(c)), this angle is called the critical angle. For any angle of incidence greater than c
the light will be refracted back into the incident medium, such refraction is called Total Internal
reflection (Fig 5(d)).
A periscope uses two 90o triangular prisms as total internal reflectors. Light enters the
periscope and is reflected by the first prism down the chamber, where again the light is reflected
to the observer. This may be illustrated using a ray diagram as in (Fig 6).
3.2 Lenses
Lenses are used in many aspects of technology ranging from contact lenses to projectors.
We shall again use light rays to explain the properties on lenses. There are two types of
lenses, namely: Converging: Lenses that cause parallel light rays to converge to a point (Fig 7).
Diverging: Lenses that cause parallel light rays to diverge (Fig 8). Such deviation of light rays
are caused by refraction.
It is now a good time to introduce a few new definitions: Optical Centre: The centre of
the lens Principal Axis: The line joining two centres of curvature of the surfaces of the lens.
Focal Point: The point at which light rays, parallel to the principal axis, converge, or appear to
converge, after passing through the lens. Focal Length: The distance between the optical centre
and the focal point.
40
As seen in Fig 7 and 8, the focal point of a converging lens is real, while the focal point of a
diverging lens is vitual.
3.2.1 Convex lenses

Convex lenses are in general converging lenses. Hence they possess real focal points (with one
exception, discussed later). Such focal points allow for real images to be formed.
One may verify the above by placing an illuminated object on one side of a convex lens,
ensuring that the distance between them is greater than the focal length (explained later). By
placing a screen on the other side of the lens and varing the distance, one will acquire a sharp
image of the object on the screen.
The ray diagrams below illustrate the images formed when an object is placed a distance d
from the optical centre of a convex lens with focal length F.
d Image type Magnification Orientation Image Position (I) Figure ¿2F Real ¡1 Inverted F¡I¡2F
9(a) 2F Real 1 Inverted 2F 9(b) F¡d¡2F Real ¿1 Inverted ¿2F 9(c) F No Image - - - 9(d) ¡F Virtual
¿1 Original ¿d 9(e)
3.2.2 Concave Lenses

Concave lenses disperse parallel rays of light and are hence diverging lenses. All images formed
by concave lenses are virtual and placed between the lens and the object. Furthermore, the
image retains its original orientation while it is smaller in size (Fig 10).
B0
B
A0 A
41
B0
A0 A
3.2.3 Magnification
By Definition the magnification, m, is:
m = (Height of Image) / (Height of Object)
however, using similar triangles, we may prove that:
m = (Distance of Image) / (Distance of Object)
where both distances are measured from the optical centre.
The above method allows us to accurately estimate the magnification of an image. This is
commonly used in a compound microscope as discussed in the next section.
Worked Example 2
n object is placed 0.5m in front of a convex a lens.

• At what distance should a screen be placed in order to create an image with a
magnification of 1.5?
• If the height of the image and object are equal, what is the focal length of the
lens?
Solutions: a)m = (Distance of Image) / (Distance of Object)
therefore Distance of Image = (Distance of Object) x m
Distance of Image = 0.5m x 1.5 = 0.75m
b)This implies that the magnification m = 1. Therefore from the above table it is
seen that d = I = 2F Therefore F = d/2 = 0.25m
42
3.2.4 Compound Microscope
This type of microscope uses two convex lenses. The first creates a real magnified image of the
object that is in turn used by the second lens to create the final image. This image is virtual
and again enlarged. The final image, as seen in Fig 11, is virtual, enlarged and inverted.
The lens, L1 that forms the real image is called the objective lens, while L2 is referred to as
the eyepiece.
A1
B
B1
3.2.5 The Human Eye

The eye also contains a biconvex lens that is used to focus objects onto the retina of the eye.
However, in some cases the lens maybe abnormal and cause defects in ones vision.
Hyperopia (Long-Sightedness)
This occurs when the image is focussed beyond the retina. Hyperopia is due to the eyeball being
too short or the lens not being convex enough. A convex lens is used to correct this defect
(Fig12).
Miopia (Short-Sightedness)
Images are focussed before the retina. The lens being too convex or the eyeball being too long
causes this. A concave lens corrects this defect (Fig 13).
Astigmatism
When this occurs, one is able to focus in one plane (e.g. vertical) but not another. This again is
due to a distortion in the lens and may be cured by using relevant lenses.
43
3.3 Introduction
Light is at first, something we feel incredibly familiar with. It can make us feel warm, it allows
us to see, allows mirrors and lenses to ‘work’, allows for ...
Under more careful study light exhibits many fascinating and wonderful properties. The
study of light has led to many important and amazing scientific discoveries and much progress.
For example fibre optics, lasers and CCD’s play a huge role in modern technology.
• Light is a form of energy. This is demonstrated by Crookes Radiometer or Solar Cells
• Light travels in straight lines. This is demonstrated by an experiment involving a card with
an hole looking at light source e.g. candle. Also the simple camera: candle black box one
side pin hole other side grease proof paper. We see the candle upside down on the paper
• Light travels at a constant speed. The speed depends on the medium it is in. (substance
like air or water)1 .
• Nothing travels faster than the speed of light in a vacuum c = 2.99790 × 10 8 . This is one
of the fundamental constants in physics.
Probably the most important use of light by the majority of living things on earth is that
it allows them to see. If the light from an object enters our optical detectors/sensors i.e. our
eyes!, we can see that object. In some cases the light originates at the object itself. Objects
which give out light are said to be luminous objects e.g. a lighted candle/torch/bulb, the Sun,
stars. The moon is not a luminous object! Why?
Most objects however are not luminous, objects which do not give out their own light. We
can see them because they reflect light into our eyes.
3.4 Reflection
3.4.1 Diffuse reflection
(NOTE TO SELF: diag of light rays hitting a rough surface) (NOTE TO SELF: diag of light
rays hitting a polished surface)
Most objects do not have perfectly smooth surfaces. Because of this different parts of the
surface reflect light rays in different directions (angles).
3.4.2 Regular reflection

Mirrors and highly polished surfaces give regular reflection. A mirror is a piece of glass with a
thin layer of silver (aluminium is commonly used) on the rear surface
Light is reflected according to the laws of reflection.
3.4.3 Laws of reflection

(NOTE TO SELF: diag of i N r rays striking a mirror define i r N)
Laws of reflection:
The angle of incidence is always equal to the angle of reflection
The incident ray, the normal and the reflected ray are all in the same plane
1 There are some substances where light moves so slowly you can walk faster than it moves - more on this later!
44
Note that the angle of incidence i is between the incident ray and the normal 2 to the surface,
not between the incident ray and the surface of the mirror.
There are two forms of an image formed by reflection: real and virtual.
A real image is formed by the actual intersection of light rays. It is always inverted (upside
down) and can be formed on a screen
A virtual image is formed by the apparent intersection of light rays. It is always erect and
cannot be formed on a screen.
Images formed in plane mirrors are virtual images. Real images are formed by lenses (e.g. the
image on a cinema screen) or by curved mirrors.
3.4.4 Lateral inversion

Where some thing is back to front e.g. AMBULANCE
(NOTE TO SELF: How a periscope works, why images are right!)
3.5 Curved Mirrors

3.5.1 Concave Mirrors (Converging Mirrors)
(NOTE TO SELF: how to remember a con cave from a convex mirror)
(NOTE TO SELF: diag of light rays striking a concave mirror base ray diag! define things)
P = pole of mirror F = focal point (focus) C = centre of curvature —CP— = radius of
curvature (r) —FP— = focal length (f)
r = 2f
Rules for ray tracing:

Rays of light that arrive parallel to principal axis leave the surface of the mirror through the focal point
Rays of light that arrive through the focal point leave the surface of the mirror parallel to principal axis
Rays of light that arrive through the centre of curvature leave the surface back through the centre of curvature
(NOTE TO SELF: Maybe diag for each of these above!)

In order to obtain the position, nature (real or virtual) and size of the image we need just
apply the rules above. The details depend on the distance of the object from the mirror surface..
Object outside C
diag
Image - located between c and f - inverted (upside down) - diminished (reduced in size,
smaller) - real
Object at C
diag
Image - located at c - inverted (upside down) - same size - real
Object between C and f
diag
Image - located outside c - inverted (upside down) - magnified (increased in size, larger) -
real
Object at f
diag
2 The normal is a line that is perpendicular to the surface i.e. the angle between the line and the surface is 90 o
45
Image - located at infinity
Object between f and P
diag
Image - located behind the mirror - erect (right side up) - magnified (increased in size, larger)
- virtual
3.5.2 Convex Mirrors

diag base ray diag! define things
Image - located behind the mirror - erect (right side up) - diminished (reduced in size, smaller)
- virtual
We can also arrive at the position and nature of the image by calculation, using the following
formula
1/u + 1/v = 1/f
AND
Magnification (=M)
m = v/u
(We will deal with the ‘proff’ for these later)
N.B.
distance between f and P = f (focal length negative for convex mirror) distance between o
and P = u (object distance) distance between i and P = v (image distance negative for virtual
image)
concave mirror f is positive convex mirror f is negative real image v is positive virtual image
v is negative
Lots of examples with numbers
e.g. u = 10cm v = 20cm m=2
things are bigger if m ¿ 1 (and -1) things are smaller if 0 ¿ m ¿ 1 (and -1)
Uses of Convex mirrors
• image is always erect
• wide range of view
They often used in shops, double decker busses, dangerous bends in roads, wing mirrors of cars
Disadvantage False sense of distance (objects seem closer than they actually are)
uses of concave mirrors
They are usually used as make-up mirrors or shaving mirrors and in reflecting telescopes
Advantages
• if object is inside f the image is magnified
MAYBE MENTION ‘Virtual object’ in convex mirror for completeness
3.5.3 Refraction
When light travels from one medium to another it changes direction, except when it is incident
normally on the separating surface. The change of direction is caused by the change in the
velocity of the light as it passes from one medium to the other.
46
4
1 D C
-1
A B
-2
-3
-4
-5 -4 -3
diag defining angles -2i, r and
-1
N 0 1 2 3 4 5
Light is refracted according to the laws of refraction:
3.5.4 Laws of Refraction

Laws of Refraction:
sin i /sin r is a constant for two given media (Snell’s Law)
The incident ray, the normal and the refracted ray are all in the same plane
Sin i /sin r is known as the refractive index (n)

EXP verify Snell’s law
EXP coin in an empty cup, move head till it disappears. Then fill with water. Can you see
it?
diag real apparent depth
Due to refraction a body which is at O beneath the water appears to be at I when seen from
above. As a result of refraction the pool appears to be 1.5m instead of 2m. The relationship
between the real depth and the apparent depth is determined by the refractive index of water,
which is 4/3
diag of water depth in pool
n = sin i /sin r =—AP—/—PI— / —AP—/—PO— —PO—/—PI—
However the above diagram is greatly exaggerated in size. In practise
—PO— —AO— and —PI— —AI—
So n =—AO—/—AI— == real/apparent depth!
More than two media
1 n 3=1 n 2×2 n 3
e.g. air glass water
The refractive index of glass is 3/2 and the refractive index of water is 4/3. The refractive
index from water to glass
a n w= 4/3 =¿ w n a =3/4
w n g = w n a × a n g = 3/4 × 3/2 = 9/8
47
3.5.5 Total Internal Reflection
This can only happen when light is travelling into a less dense medium
Refrectionnumbers are n1 = 2 and n2 = 1:
6
2
A B
1
-1
-2
-3
-8
diag air-7glass -6critical-5angle-4i r -3 -2 -1 0 1 2 3 4 5 6 7 8
When light travels from glass to air it is refracted away from the normal as in a above. As
the angle of incidence is increased the angle of refraction eventually reaches 90 o as in b If the
angle of incidence is increased further beyond this value total internal reflection occurs as in c
The critical angle c is the angle of incidence corresponding to the angle of refraction of 90 o
From the above the refractive index from from air to glass
n=sin90/sin c = 1/sin c
Also sin c = 1 / n = 2/3 in the case of glass.
Sin c = 0.6667 =¿ critical angle for glass is 41o 490
Total internal reflection has some very useful properties eg
diag prism for turning light 180o
daig prism for turning light 90o
The size of the final image in a pair of binoculars depends on the distance travelled by the light
within the binoculars. By using two prisms this distance can be increased without increasing
the length of the binoculars.
Fibre Optics
Water can be directed from one place to another by confining it within a pipe. In the same
way light can be directed from one place to another by confining it within a single glass fibre.
The light is kept within the fibre by total internal reflection. The amount of light which can be
carried by a single fibre is very small so it is usual to form a light tube tapping a few thousand
fibres together. On great advantage of such a light tube is flexibility; it can be ties in knots
48
and still function. However since total internal reflection only occurs when light is going from a
medium to a less dense medium, it is necessary ti coat each fibre with glass of a lower refractive
index. Otherwise light would leak from one fibre at their points of contact.
Light tube can be used to bring light from a lamp to an object, thus illuminating the object.
A second light tube can then used to carry light from the illuminated object to an observer, thus
enabling the object to be seen and photographed. The procedure has been used to photograph
the digestive system the reproductive system and many other parts of the human body. In the
case of the light tube carrying light from the object to the observer, it is vital that the individual
fibres in the tube do not cross each other, otherwise the image will become garbled. Like radio
waves, light waves are electromagnetic. (cf section em) However, their shorter wavelength and
higher frequency means that a single light beam can carry far more telephone conservations at
one time compared with a radio wave.
In the case of long fibre cables it would be necessary to incorporate a device to boost the
intensity of the light to make up for losses due to absorption. Nevertheless the system has great
potential for the communication industry, including the possibility of transmitting pictures over
long distances.
As we said earlier, the reason why light bends when going from one medium to another is
because of the change of velocity. This will be dealt with in more detail later. For the moment
we consider only the implication for the refractive index.
1 n 2 = velocity medium 1 / velocity medium 2
3.5.6 Mirage
Yet another effect of refraction is the mirage. The most common mirage occurs in warm weather
when motorists see what appears to be a pool of water on the road close to the horizon. The
explanation is this: when air is heated it expands and becomes less dense and when it cools it
contracts and becomes more dense. In summer the ground is hot and the layer of air nearest
the ground is hot. The layer above that is cooler, etc etc. A of light coming from the blue sky
passes down through the layers of air which are getting progressively less dense. As it does so it
is progressively bent, as shown in the diagram. As a result an image of the blue sky is seen on
the road and is taken to be a pool of water!
3.6 The Electromagnetic Spectrum

They are transverse waves. They can travel through empty space. They travel at the speed of
light.
Short wavelength Long wavelength
Dangers
Microwaves kill living cells Ultraviolet light causes skin cancer and can kill living cells
Uses
Radio waves are used in TV’s and radios Microwaves are used to heat foods, they are also
used to transmit signals to satellites and back to earth. Infrared light is used to asses heat loss
from buildings, weather forecasting, locating survivors in earthquakes and in TV remote controls.
Visible light is used in fibre optics. Ultraviolet light produces vitamins in the skin if it is in small
doses. Suntan. X-Rays are used to look at bones inside your body, my body and everybody’s
body. g-rays are used to treat cancer.
49
Units
Quantity Symbol Unit S.I. Units Direction
or
Table 3.1: Units used in Optics
50
Chapter 4
Vectors
(NOTE TO SELF: SW: initially this chapter had a very mathematical approach. I have toned
this down and tried to present in a logical way the techniques of vector manipulation after
first exploring the mathematical properties of vectors. Most of the PGCE comments revolved
around the ommision of the graphical techniques of vector addition (i.e. scale diagrams), incline
questions and equilibrium of forces. I have addressed the first two; equilibrium of forces and the
triangle law of three forces in equilibrium I think would be better off in the Forces Chapter. Also
the Forces chapter should include some examples of incline planes. Inclines are introduced here
merely as an example of components in action!)
4.1 PGCE Comments

• Use a+b = c to illustrate that a = c-b under subtraction.
• Summarise properties of vectors at end.
• Mention that vector multiplication exists in two forms- neither introduced at school, but
used implicitly in work and motor rules.

• Mention that the direction of a vector is measured from its tail.
• Also include explanations of the ways in which to specify direction (e.g. bearing, compass
points, angle from vertical, etc.)
• Include exam-type questions involving flowing rivers or aeroplanes in wind. These questions
link displacement, velocity and time and also test the learners understanding of vectors
combining to give a combined result (i.e. resultant).
• Mention that displacement at a point is the directed line from the start to that point.
• Rewrite section on velocity to make clear the distinction between average and instantaneous
rates of change (velocity and speed). The ∆’s in the equations imply we are calculating
average quantities. Mention that we take the limit of a small time interval to give instanta-
neous quantities. Perhaps the example of a parabola with average gradient and gradient of
51
tangent can be used as an illustration. Else defer until chapter on Graphs and Equations of
Motion. Instantaneous velocity: reading on the speedometer in a direction tangent to the
path. Instantaneous speed is magnitude of instantaneous velocity but average speed is not
equal to magnitude of average velocity. Average speed and average velocity are the total
distance and resultant displacement over the time interval related to that part of the path.
The example of the circular track uses these definitions and is an important illustration
of the differences. Instantaneous calculated at a certain instant in time while average is
calculated over an interval.
• Include relative velocity.
• Address PGCE comments above and comments in the text.
4.3 Introduction
“A vector is ‘something’ that has both magnitude and direction.” “‘Things’ ? What sorts of
‘things’ ?” Any piece of information which contains a magnitude and a related direction can be
a vector. A vector should tell you how much and which way.
Consider a man driving his car east along a highway at 100 km/h. What we have given here
is a vector– the car’s velocity. The car is moving at 100 km/h (this is the magnitude) and we
know where it is going– east (this is the direction). Thus, we know the speed and direction of
the car. These two quantities, a magnitude and a direction, form a vector we call velocity.
Definition: A vector is a measurement

which has both magnitude and direction.
In physics magnitudes often have directions associated with them. If you push something
it is not very useful knowing just how hard you pushed. A direction is needed too. Directions
are extremely important, especially when dealing with situations more complicated than simple
pushes and pulls.
Different people like to write vectors in different ways. Anyway of writing a vector so that it
has both magnitude and direction is valid.
Are vectors physics? No, vectors themselves are not physics. Physics is just a description
of the world around us. To describe something we need to use a language. The most common
language used to describe physics is mathematics. Vectors form a very important part of the
mathematical description of physics, so much so that it is absolutely essential to master the use
of vectors.
4.3.1 Mathematical representation

Numerous notations are commonly used to denote vectors. In this text, vectors will be denoted
→
−
by symbols capped with an arrow. As an example, →
−s,→−
v and F are all vectors (they have both
magnitude and direction). Sometimes just the magnitude of a vector is required. In this case,
→
− → −
the arrow is ommitted. In other words, F denotes the magnitude of vector F . | F | is another
way of representing the size of a vector.
52
4.3.2 Graphical representation
Graphically vectors are drawn as arrows. An arrow has both a magnitude (how long it is) and
a direction (the direction in which it points). For this reason, arrows are vectors.
In order to draw a vector accurately we must specify a scale and include a reference direction
in the diagram. A scale allows us to translate the length of the arrow into the vector’s magnitude.
For instance if one chose a scale of 1cm = 2N (1cm represents 2N ), a force of magnitude 20N
would be represented as an arrow 10cm long. A reference direction may be a line representing a
horizontal surface or the points of a compass.
Worked Example 3
Drawing vectors
Question: Using a scale of 1cm = 2m.s−1 represent the following velocities:

a) 6m.s−1 north
b) 16m.s−1 east
Answer: N
scale 1cm = 2m.s−1
W E
S
3cm
8cm
a) b)
4.4 Some Examples of Vectors

4.4.1 Displacement
Imagine you walked from your house to the shops along a winding path through the veld. Your
route is shown in blue in Figure 12.3. Your sister also walked from the house to the shops, but
she decided to walk along the pavements. Her path is shown in red and consisted of two straight
stretches, one after the other. Although you took very different routes, both you and your sister
walked from the house to the shops. The overall effect was the same! Clearly the shortest path
from your house to the shops is along the straight line between these two points. The length of
this line and the direction from the start point (the house) to the end point (the shops) forms a
very special vector known as displacement. Displacement is assigned the symbol → −s.
Definition: Displacement is defined as the magnitude and direction

of the straight line joining one’s starting point to one’s final
point.
53
Finish
(Shop)

t
en
c em
la
isp
D
Start
(House)
Figure 4.1: Illustration of Displacement
OR
Definition: Displacement is a vector with direction
pointing from some initial (starting) point to some final (end) point and
whose magnitude is the straight-line distance from the starting point
to the end point.
(NOTE TO SELF: choose one of the above)

In this example both you and your sister had the same displacement. This is shown as the
black arrow in Figure 12.3. Remember displacement is not concerned with the actual path taken.
It is only concerned with your start and end points. It tells you the length of the straight-line path
between your start and end points and the direction from start to finish. The distance travelled
is the length of the path followed and is a scalar (just a number). Note that the magnitude of
the displacement need not be the same as the distance travelled. In this case the magnitude of
your displacement would be considerably less than the actual length of the path you followed
through the veld!
4.4.2 Velocity
Definition: Velocity is the rate of change of
displacement with respect to time.
The terms rate of change and with respect to are ones we will use often and it is important
that you understand what they mean. Velocity describes how much displacement changes for a
certain change in time.
We usually denote a change in something with the symbol ∆ (the Greek letter Delta). You
∆y
have probably seen this before in maths– the gradient of a straight line is ∆x . The gradient is
just how much y changes for a certain change in x. In other words it is just the rate of change
of y with respect to x. This means that velocity must be
→
− ∆→
−
s →
−
s f inal − →
−s initial
v = = . (4.1)
∆t tf inal − tinitial
54
(NOTE TO SELF: This is actually average velocity. For instantaneous ∆’s change to dif-
ferentials. Explain that if ∆ is large then we have average velocity else for infinitesimal time
interval instantaneous!)
What then is speed? Speed is how quickly something is moving. How is it different from
velocity? Speed is not a vector. It does not tell you which direction something is moving, only
how fast. Speed is the magnitude of the velocity vector (NOTE TO SELF: instantaneous speed
is the magnitude of the instantaneous velocity.... not true of averages!).
Consider the following example to test your understanding of the differences between velocity
and speed.
Worked Example 4
Speed and Velocity
Question: A man runs around a circular track of radius 100m. It takes him 120s to
complete a revolution of the track. If he runs at constant speed calculate:
1. his speed,
2. his instantaneous velocity at point A,
3. his instantaneous velocity at point B, N
4. his average velocity between points A and B,
5. his average velocity during a revolution.
W E

A
S
Direction the man runs
100m
B

Answer:
1. To determine the man’s speed we need to know the distance he travels and how
long it takes. We know it takes 120s to complete one revolution of the track.
Step 1 : First we find the distance the man travels
What distance is one revolution of the track? We know the track is a circle and
we know its radius, so we can determine the perimeter or distance around the
circle. We start with the equation for the circumference of a circle
C = 2πr
= 2π(100m)
= 628.3 m.
So we know the distance the man covers in one revolution is 628.3 m.
55
Step 2 : Now we determine speed from the distance and time.
We know that speed is distance covered per unit time. So if we divide the
distance covered by the time it took we will know how much distance was covered
for every unit of time.
Distance travelled
v =
time taken
628.3m
=
120s
= 5.23 m.s−1
2. Step 3 : Determine his instantaneous velocity at A

Consider the point A in the diagram.
We know which way the man is running around the track and we know his speed.
His velocity at point A will be his speed (the magnitude of the velocity) plus his
direction of motion (the direction of his velocity). The instant that he arrives
at A he is moving as indicated in the diagram below.
So his velocity vector will be 5.23 m.s−1 West.

3. Step 4 : Determine his instantaneous velocity at B
Consider the point B in the diagram.

B

56
We know which way the man is running around the track and we know his speed.
His velocity at point B will be his speed (the magnitude of the velocity) plus his
direction of motion (the direction of his velocity). The instant that he arrives
at B he is moving as indicated in the diagram below.
B

So his velocity vector will be 5.23 m.s−1 South.

4. Step 5 : Now we determine his average velocity between A and B
(NOTE TO SELF: add this here to further stress the difference between average
and instantaneous velocities, as well as the difference between magnitude of
average velocity and average speed!)
5. Step 6 : Now we calculate his average velocity over a complete revolution.
The definition of average velocity is given earlier and requires that you know the
total displacement and the total time. The total displacement for a revolution
is given by the vector from the initial point to the final point. If the man runs Remember -
in a circle then he ends where he started. This means the vector from his initial displacement
point to his final point has zero length. can be zero
So a calculation of his average velocity follows: even when
distance is
→
− ∆→−
s
v = not!
∆t
0m
=
120s
= 0 m.s−1
4.4.3 Acceleration
Definition: Acceleration is the rate of change of
velocity with respect to time.
Acceleration is also a vector. Remember that velocity was the rate of change of displacement
with respect to time so we expect the velocity and acceleration equations to look very similar. In
fact,
→
− ∆→
−
v →
−
v f inal − →
−v initial
a = = (4.2)
∆t tf inal − tinitial
(NOTE TO SELF: average and instantaneous distiction again! expand further- what does it
mean.)
Acceleration will become very important later when we consider forces.
57
4.5 Mathematical Properties of Vectors
Vectors are mathematical objects and we will use them to describe physics in the language of
mathematics. However, first we need to understand the mathematical properties of vectors (e.g.
how they add and subtract).
We will now use arrows representing displacements to illustrate the properties of vectors.
Using vectors i
Remember that displacement is just one example of a vector. We could just as well have decided
an important
to use forces to illustrate the properties of vectors.
skill you MUS
master!
4.5.1 Addition of Vectors
If we define a displacement vector as 2 steps in the forward direction and another as 3 steps
in the forward direction then adding them together would mean moving a total of 5 steps in
the forward direction. Graphically this can be seen by first following the first vector two steps
forward and then following the second one three steps forward:
2 steps 3 steps
+ =
5 steps
=
We add the second vector at the end of the first vector, since this is where we now are after the
first vector has acted. The vector from the tail of the first vector (the starting point) to the head
of the last (the end point) is then the sum of the vectors. This is the tail-to-head method of
vector addition.
As you can convince yourself, the order in which you add vectors does not matter. In the
example above, if you decided to first go 3 steps forward and then another 2 steps forward, the
end result would still be 5 steps forward.
The final answer when adding vectors is called the resultant.
Definition: The resultant of a number of vectors

is the single vector whose effect is the same as
the individual vectors acting together.
In other words, the individual vectors can be replaced by the resultant– the overall effect is the
→
− →
−
same. If vectors →
−
a and b have a resultant R , this can be represented mathematically as,
→
− →
− →
−
R = a + b.
Let us consider some more examples of vector addition using displacements. The arrows tell
you how far to move and in what direction. Arrows to the right correspond to steps forward,
while arrows to the left correspond to steps backward. Look at all of the examples below and
check them.
1 step 1 step 2 steps 2 steps
+ = =
1 step 1 step 2 steps 2 steps

+ = =
58
Let us test the first one. It says one step forward and then another step forward is the same
as an arrow twice as long– two steps forward.
It is possible that you end up back where you started. In this case the net result of what you
have done is that you have gone nowhere (your start and end points are at the same place). In
→
−
this case, your resultant displacement is a vector with length zero units. We use the symbol 0
to denote such a vector:
1 step 1 step 1 step →

−
+ = = 0
1 step
1 step 1 step 1 step →

−
+ = = 0
1 step
Check the following examples in the same way. Arrows up the page can be seen as steps left
and arrows down the page as steps right.
Try a couple to convince yourself!
+ = = + = =
+ = =→
−
0 + = =→
−
0
It is important to realise that the directions aren’t special– ‘forward and backwards’ or ‘left
and right’ are treated in the same way. The same is true of any set of parallel directions:
+ = = + = =
+ = =→
−
0 + = =→
−
0
In the above examples the separate displacements were parallel to one another. However the
same ‘tail-to-head’ technique of vector addition can be applied to vectors in any direction.
+ = = + = =
59
+ = =
Now you have discovered one use for vectors; describing resultant displacement– how far and
in what direction you have travelled after a series of movements.
Although vector addition here has been demonstrated with displacements, all vectors behave
in exactly the same way. Thus, if given a number of forces acting on a body you can use the same
method to determine the resultant force acting on the body. We will return to vector addition
in more detail later.
4.5.2 Subtraction of Vectors

What does it mean to subtract a vector? Well this is really simple; if we have 5 apples and we
subtract 3 apples, we have only 2 apples left. Now lets work in steps; if we take 5 steps forward
and then subtract 3 steps forward we are left with only two steps forward:
5 steps 3 steps 2 steps
- =
What have we done? You originally took 5 steps forward but then you took 3 steps back.
That backward displacement would be represented by an arrow pointing to the left (backwards)
with length 3. The net result of adding these two vectors is 2 steps forward:
5 steps 3 steps 2 steps
+ =
Thus, subtracting a vector from another is the same as adding a vector in the
opposite direction (i.e. subtracting 3 steps forwards is the same as adding 3 steps backwards).
This suggests that in this problem arrows to the right are positive and arrows to the left
are negative. More generally, vectors in opposite directions differ in sign (i.e. if we define up
as positive, then vectors acting down are negative). Thus, changing the sign of a vector simply
reverses its direction:
- = - =
- = - =
- = - =
60
→
−
In mathematical form, subtracting →
−
a from b gives a new vector →
−c :
→
−c = →
− →
b −− a
→
−
= b + (−→−
a)
→
− →
−
This clearly shows that subtracting vector →−
a from b is the same as adding (−→
−
a ) to b .
Look at the following examples of vector subtraction.
- = + =→
−
0
- = + =
4.5.3 Scalar Multiplication

What happens when you multiply a vector by a scalar (an ordinary number)?
Going back to normal multiplication we know that 2 × 2 is just 2 groups of 2 added together
to give 4. We can adopt a similar approach to understand how vector multiplication works.
2x = + =
4.6 Techniques of Vector Addition

Now that you have been acquainted with the mathematical properties of vectors, we return to
vector addition in more detail. There are a number of techniques of vector addition. These
techniques fall into two main categories- graphical and algebraic techniques.
4.6.1 Graphical Techniques

Graphical techniques involve drawing accurate scale diagrams to denote individual vectors and
their resultants. We next discuss the two primary graphical techniques, the tail-to-head tech-
nique and the paralelogram method.
The Tail-to-head Method
In describing the mathematical properties of vectors we used displacements and the tail-to-
head graphical method of vector addition as an illustration. In the tail-to-head method of vector
addition the following strategy is followed:
• Choose a scale and include a reference direction.
• Choose any of the vectors to be summed and draw it as an arrow in the correct direction
and of the correct length– remember to put an arrowhead on the end to denote its direction.
61
• Take the next vector and draw it as an arrow starting from the arrowhead of the first vector
in the correct direction and of the correct length.
• Continue until you have drawn each vector– each time starting from the head of the previous
vector. In this way, the vectors to be added are drawn one after the other tail-to-head.
• The resultant is then the vector drawn from the tail of the first vector to the head of the
last. Its magnitude can be determined from the length of its arrow using the scale. Its
direction too can be determined from the scale diagram.
Worked Example 5
Tail-to-Head Graphical Addition I
Question: A ship leaves harbour H and sails 6km north to port A. From here the
ship travels 12km east to port B, before sailing 5.5km south-west to port C. De-
termine the ship’s resultant displacement using the tail-to-head technique of vector
addition.
Answer:
Now, we are faced with a practical issue: in this problem the displacements are too
large to draw them their actual length! Drawing a 2km long arrow would require a
very big book. Just like cartographers (people who draw maps), we have to choose
a scale. The choice of scale depends on the actual question– you should choose a
scale such that your vector diagram fits the page. Before choosing a scale one should
always draw a rough sketch of the problem. In a rough sketch one is interested in the
approximate shape of the vector diagram.
N
Step 1 : Draw a rough sketch of the situation
Its easy to understand the problem if we first draw a quick sketch.
W E
S
12km
A B
45o
5.5km
6km
62
In a rough sketch one should include all of the information given in the problem. All
of the magnitudes of the displacements are shown and a compass has been included
as a reference direction.
Step 2 : Next we choose a scale for our vector diagram
It is clear from the rough sketch that choosing a scale where 1cm represents 1km
(scale: 1cm = 1km) would be a good choice in this problem )– the diagram will then
take up a good fraction of an A4 page. We now start the accurate construction.
Step 3 : Now we construct our scaled vector diagram
Contruction Step 1: Starting at the harbour H we draw the first vector 6cm long
in the direction north (remember in the diagram 1cm represents 1km):
A
6cm
W E
S
H
1cm = 1km
Construction Step 2: Since the ship is now at port A we draw the second vector
12cm long starting from this point in the direction east:
63
A 12cm
6cm B
W E
S
H
1cm = 1km
64
Construction Step 3: Since the ship is now at port B we draw the third vector
5.5cm long starting from this point in the direction south-west. A protractor is re-
quired to measure the angle of 45o .
A 12cm
B
45o
m
5c
5.
6cm
C N
W E
S
H
1cm = 1km
Construction Step 4: As a final step we draw the resultant displacement from the
starting point (the harbour H) to the end point (port C). We use a ruler to measure
the length of this arrow and a protractor to determine its direction
A 12cm
B
45o
m
5c
5.
6cm
C N
W E
m
75.4o 8.38c
S
H
1cm = 1km
65
Step 4 : Apply the scale conversion
We now use the scale to convert the length of the resultant in the scale diagram to
the actual displacement in the problem. Since we have chosen a scale of 1cm = 1km
in this problem the resultant has a magnitude of 8.38 km. The direction can be
specified in terms of the angle measured either as 75.4o east of north or on a bearing
of 75.4o .
Step 5 : Quote the final answer
The resultant displacement of the ship is 8.38 km on a bearing of 75.4o !
Worked Example 6
Tail-to-Head Graphical Addition II
Question: A man walks 40 m East, then 30 m North.

a) What was the total distance he walked? N
b) What is his resultant displacement?
W E
S
30m
40m
Answer:
Step 1 : a) Determine the distance that the man traveled
In the first part of his journey he traveled 40 m and in the second part he traveled
30 m. This gives us a total distance traveled of 40 + 30 = 70 m.
Step 2 : b) Determine his resultant displacement - start by drawing a rough sketch
The man’s resultant displacement is the vector from where he started to where he
ended. It is the sum of his two separate displacements. We will use the tail-to-head
method of accurate construction to find this vector. Here is our rough sketch:
66
N
W E
S
ant
s ult
Re
30m
40m
Step 3 : Choose a suitable scale

A scale of 1cm represents 5m (1cm = 5m) is a good choice here. Now we can begin
the process of construction.
Step 4 : Draw the first vector according to scale
We draw the first displacement as an arrow 8cm long (according to the scale 8cm =
8 × 5m = 40m) in the direction east:
N
W E
1cm = 5m
8cm
Step 5 : Draw the second vector according to scale

Starting from the head of the first vector we draw the second displacement as an
arrow 6cm long (according to the scale 6cm = 6 × 5m = 30m) in the direction north:
67
N
W E
1cm = 5m
6cm
8cm
Step 6 : Determine the resultant vector

Now we connect the starting point to the end point and measure the length and
direction of this arrow (the resultant)
N
W E
1cm = 5m
cm
10
6cm
36.9o
8cm

Finally we use the scale to convert the length of the resultant in the scale diagram to
the actual magnitude of the resultant displacement. According to the chosen scale
1cm = 5m. Therefore 10cm represents 50m. The resultant displacement is then 50m
36.9o north of east.
68
The Parallelogram Method
When needing to find the resultant of two vectors another graphical technique can be applied-
the parallelogram method. The following strategy is employed:
• Choose a scale and a reference direction.
• Choose either of the vectors to be added and draw it as an arrow of the correct length in
the correct direction.
• Draw the second vector as an arrow of the correct length in the correct direction from the
tail of the first vector.
• Complete the parallelogram formed by these two vectors.
• The resultant is then the diagonal of the parallelogram. Its magnitude can be determined
from the length of its arrow using the scale. Its direction too can be determined from the
scale diagram.
Worked Example 7
Parallelogram Method of Graphical Addition I
Question: A force of F1 = 5N is applied to a block in a horizontal direction. A

second force F2 = 4N is applied to the object at an angle of 30o above the horizontal.
4N
=
F2
30o
F1 = 5N
Determine the resultant force acting on the block using the parallelogram method of
accurate construction.
Answer:
Step 1 : Firstly make a rough sketch of the vector diagram
4N
30o
5N
69
Step 2 : Choose a suitable scale
In this problem a scale of 1cm = 0.5N would be appropriate, since then the vector
diagram would take up a reasonable fraction of the page. We can now begin the
accurate scale diagram.
Step 3 : Draw the first scaled vector

Let us draw F1 first. According to the scale it has length 10cm:
10cm
1cm = 0.5N
Step 4 : Draw the second scaled vector

Next we draw F2 . According to the scale it has length 8cm. We make use of a
protractor to draw this vector at 30o to the horizontal:
8cm
30o
10cm
1cm = 0.5N
Step 5 : Determine the resultant vector

Next we complete the parallelogram and draw the diagonal:
m
8cm 17.4c
13.3o
10cm
1cm = 0.5N

Finally we use the scale to convert the measured length into the actual magnitude.
Since 1cm = 0.5N , 17.4cm represents 8.7N . Therefore the resultant force is 8.7N at
13.3o above the horizontal.
70
The parallelogram method is restricted to the addition of just two vectors. However, it is
arguably the most intuitive way of adding two forces acting at a point.
4.6.2 Algebraic Addition and Subtraction of Vectors

Vectors in a Straight Line
Whenever you are faced with adding vectors acting in a straight line (i.e. some directed
left and some right, or some acting up and others down) you can use a very simple algebraic
technique:
• Choose a positive direction. As an example, for situations involving displacements in the
directions west and east, you might choose west as your positive direction. In that case,
displacements east are negative.
• Next simply add (or subtract) the vectors with the appropriate signs.
• As a final step the direction of the resultant should be included in words (positive answers
are in the positive direction, while negative resultants are in the negative direction).
Let us consider a couple of examples.
Worked Example 8
Adding vectors algebraically I
Question: A tennis ball is rolled towards a wall which is 10m away to the right.
If after striking the wall the ball rolls a further 2.5m along the ground to the left,
calculate algebraically the ball’s resultant displacement.
(NOTE TO SELF: PGCE suggest a ‘more real looking’ diagram, followed by a di-
agram one would draw to solve the problem (like our existing one with the positive
direction shown as an arrow)) Answer:
10 m
2.5 m
Wall
Start
Step 2 : Decide which method to use to calculate the resultant

We know that the resultant displacement of the ball (→ −
s resultant ) is equal to the sum
→
− →
−
of the ball’s separate displacements ( s 1 and s 2 ):
→
−
s = → −
s +→ −
s
resultant 1 2
Since the motion of the ball is in a straight line (i.e. the ball moves left and right),
we can use the method of algebraic addition just explained.
71
Step 3 : Choose a positive direction
Let’s make to the right the positive direction. This means that to the left becomes
the negative direction.
Step 4 : Now define our vectors algebraically
With right positive:
→
−
s1 = +10.0m
and
→
−
s2 = −2.5m
Step 5 : Add the vectors

Next we simply add the two displacements to give the resultant:
→
−
s resultant = (+10m) + (−2.5m)
= (+7.5)m
Step 6 : Quote the resultant

Finally, in this case right means positive so:
→
−
s resultant = 7.5m to the right
Let us consider an example of vector subtraction.
Worked Example 9
Subtracting vectors algebraically I
Question: Suppose that a tennis ball is thrown horizontally towards a wall at 3m.s −1
to the right. After striking the wall, the ball returns to the thrower at 2m.s−1 .
Determine the change in velocity of the ball.
Answer:
Step 1 : Draw a sketch
A quick sketch will help us understand the problem (NOTE TO SELF: Maybe a
sketch here?)
Step 2 : Decide which method to use to calculate the resultant
Remember that velocity is a vector. The change in the velocity of the ball is equal
to the difference between the ball’s initial and final velocities:
∆→
−
v = →
−
v f inal − →
−
v initial
Since the ball moves along a straight line (i.e. left and right), we can use the algebraic
technique of vector subtraction just discussed.
Let’s make to the right the positive direction. This means that to the left becomes
the negative direction.
72
Step 4 : Now define our vectors algebraically
With right positive:
→
−
v initial = +3m.s−1
and
→
−
v f inal = −2m.s−1
Step 5 : Subtract the vectors

Thus, the change in velocity of the ball is:
∆→
−
v = (−2m.s−1 ) − (+3m.s−1 )
= (−5)m.s−1

Remember that in this case right means positive so:
∆→
−
v = 5m.s−1 to the left
Remember that the technique of addition and subtraction just discussed can only be applied
to vectors acting along a straight line.
A More General Algebraic technique
In worked example 3 the tail to head method of accurate construction was used to determine
the resultant displacement of a man who travelled first east and then north. However, the
man’s resultant can be calculated without drawing an accurate scale diagram. Let us revisit this
example.
Worked Example 10
An Algebraic solution to Worked Example 3
Question: A man walks 40 m East, then 30 m North.

Calculate the man’s resultant displacement.
Answer:
Step 1 : Draw a rough sketch

As before, the rough sketch looks as follows:
73
N
W E
S
a nt
sult
Re
30m
α
40m
Step 2 : Determine the length of the resultant

Note that the triangle formed by his separate displacement vectors and his resultant
displacement vector is a right-angle triangle. We can thus use Pythogoras’ theorem
to determine the length of the resultant. If the length of the resultant vector is called
s then:
s2 = (40m)2 + (30m)2
2
s = 2500m2
s = 50m
Step 3 : Determine the direction of the resultant

Now we have the length of the resultant displacement vector but not yet its direction.
To determine its direction we calculate the angle α between the resultant displacement
vector and East.
We can do this using simple trigonometry:
opposite
tan α =
adjacent
30
tan α =
40
α = arctan(0.75)
α = 36.9o

Our final answer is then:
Resultant Displacement: 50 m at 36.9o North of East
This is exactly the same answer we arrived at after drawing a scale diagram!
In the previous example we were able to use simple trigonometry to calculate a man’s resultant
displacement. This was possible since the man’s directions of motion were perpendicular (north
74
and east). Algebraic techniques, however, are not limited to cases where the vectors to be
combined are along the same straight line or at right angles to one another. The following
example illustrates this.
Worked Example 11
Further example of vector addition by calculation
Question: A man walks from point A to point B which is 12km away on a bearing
of 45o . From point B the man walks a further 8km east to point C. Calculate the
man’s resultant displacement.
Answer:
B 8km C
45o
F
km
12
θ G
45o
A
B ÂF = 45o since the man walks initially on a bearing of 45o . Then, AB̂G = B ÂF =
45o (alternate angles parallel lines). Both of these angles are included in the rough
sketch.
Step 2 : Calculate the length of the resultant

The resultant is the vector AC. Since we know both the lengths of AB and BC and
the included angle AB̂C, we can use the cosine rule:
AC 2 = AB 2 + BC 2 − 2 · AB · BC cos(AB̂C)
= (12)2 + (8)2 − 2 · (12)(8) cos(135o )
= 343.8
AC = 18.5 km
Step 3 : Determine the direction of the resultant

Next we use the sine rule to determine the angle θ:
75
sin θ sin 1350
=
8 18.5
8 × sin 135o
sin θ =
18.5
θ = arcsin(0.3058)
θ = 17.8o
Thus, F ÂC = 62.8o .

Our final answer is then:
Resultant Displacement: 18.5km on a bearing of 62.8o
4.7 Components of Vectors

In the discussion of vector addition we saw that a number of vectors acting together can be
combined to give a single vector (the resultant). In much the same way a single vector can be
broken down into a number of vectors which when added give that original vector. These vectors
which sum to the original are called components of the original vector. The process of breaking
a vector into its components is called resolving into components.
While summing a given set of vectors gives just one answer (the resultant), a single vector can
be resolved into infinitely many sets of components. In the diagrams below the same black vector
is resolved into different pairs of components. These components are shown in red. When added
together the red vectors give the original black vector (i.e. the original vector is the resultant of
its components).
In practice it is most useful to resolve a vector into components which are at right angles to
one another.
Worked Example 12
Resolving a vector into components
76
Question: A motorist undergoes a displacement of 250km in a direction 30 o north
of east. Resolve this displacement into components in the directions north ( →
−
s N ) and
→
−
east ( s E ).
Answer:
Step 1 : Draw a rough sketch of the original vector
W E
S
km
250
30o
Step 2 : Determine the vector component

Next we resolve the displacement into its components north and east. Since these
directions are orthogonal to one another, the components form a right-angled triangle
with the original displacement as its hypotenuse:
W E
S
km
250
sN
→
−
→
−
sE
30o
Notice how the two components acting together give the orginal vector as their re-
sultant.
Step 3 : Determine the lengths of the component vectors
Now we can use trigonometry to calculate the magnitudes of the components of the
original displacement:
sN = 250 sin 30o

= 125 km
77
and
sE = 250 cos 30o

= 216.5 km
Remember sN and sE are the magnitudes of the components– they are in the direc-
tions north and east respectively.
(NOTE TO SELF: SW: alternatively these results can be arrived at by construction.
Include?)
4.7.1 Block on an incline

As a further example of components let us consider a block of mass m placed on a frictionless
surface inclined at some angle θ to the horizontal. The block will obviously slide down the incline,
but what causes this motion?
The forces acting on the block are its weight mg and the normal force N exerted by the
surface on the object. These two forces are shown in the diagram below.
Wk
θ
W⊥
mg
Now the object’s weight can be resolved into components parallel and perpendicular to the
inclined surface. These components are shown as red arrows in the diagram above and are
at right angles to each other. The components have been drawn acting from the same point.
Applying the parallelogram method, the two components of the block’s weight sum to the weight
vector.
To find the components in terms of the weight we can use trigonometry:
Wk = mg sin θ
W⊥ = mg cos θ
The component of the weight perpendicular to the slope W⊥ exactly balances the normal
force N exerted by the surface. The parallel component, however, Wk is unbalanced and causes
the block to slide down the slope.
78
Figure 4.2: An example of two vectors being added to give a resultant
4.7.2 Vector addition using components

In Fig 4.3 two vectors are added in a slightly different way to the methods discussed so far. It
might look a little like we are making more work for ourselves, but in the long run things will be
easier and we will be less likely to go wrong.
In Fig 4.3 the primary vectors we are adding are represented by solid lines and are the same
vectors as those added in Fig 4.2 using the less complicated looking method.
Each vector can be broken down into a component in the x-direction and one in the y-
direction. These components are two vectors which when added give you the original vector as
the resultant. Look at the red vector in figure 4.3. If you add up the two red dotted ones in the
x-direction and y-direction you get the same vector. For all three vectors we have shown their
respective components as dotted lines in the same colour.
But if we look carefully, addition of the x components of the two original vectors gives the
x component of the resultant. The same applies to the y components. So if we just added all
the components together we would get the same answer! This is another important property of
vectors.
Worked Example 13
Adding Vectors Using Components
Question: Lets work through the example shown in Fig. 4.3 to determine the resul-
tant.
Answer:
Step 1 : Decide how to tackle the problem
The first thing we must realise is that the order that we add the vectors does not
matter. Therefore, we can work through the vectors to be added in any order.
79
Figure 4.3: Components of vectors can be added as well as the vectors themselves
Step 2 : Resolve the red vector into components

Let us start with the bottom vector. If you are told that this vector has a length of
5.385 units and an angle of 21.8o to the horizontal then we can find its components.
We do this by using known trigonometric ratios. First we find the vertical or y
component:
y
sin θ =
hypotenuse
y
sin(21.8) =
5.385
y = 5.385 sin(21.8)
y = 2
5
5.38
2
5
Secondly we find the horizontal or x component:
x
cos θ =
hypotenuse
x
cos(21.8) =
5.385
x = 5.385 cos(21.8)
x = 5
80
We now know the lengths of the sides of the triangle for which our vector is the
hypotenuse. If you look at these sides we can assign them directions given by the
dotted arrows. Then our original red vector is just the sum of the two dotted vectors
(its components). When we try to find the final answer we can just add all the dotted
vectors because they would add up to the two vectors we want to add.
Step 3 : Now resolve the second vector into components
. The green vector has a length of 5 units and a direction of 53.13 degrees to the
horizontal so we can find its components.
y
sin θ =
hypotenuse
y
sin(53.13) =
5
y = 5 sin(53.13)
y = 4
5
x
cos θ =
hypotenuse
x
cos(53.13) =
5
x = 5 cos(53.13)
x = 3
Step 4 : Determine the components of the resultant vector

Now we have all the components. If we add all the x-components then we will have
the x-component of the resultant vector. Similarly if we add all the y-components
then we will have the y-component of the resultant vector.
The x-components of the two vectors are 5 units right and then 3 units right. This
gives us a final x-component of 8 units right.
The y-components of the two vectors are 2 units up and then 4 units up. This gives
us a final y-component of 6 units up.
Step 5 : Determine the magnitude and direction of the resultant vector
Now that we have the components of the resultant, we can use Pythagoras’ theorem
to determine the length of the resultant. Let us call the length of the hypotenuse l
and we can calculate its value;
81
l2 = (6)2 + (8)2
l2 = 100
l = 10.
8
6
10
The resultant has length of 10 units so all we have to do is calculate its direction. We
can specify the direction as the angle the vectors makes with a known direction. To
do this you only need to visualise the vector as starting at the origin of a coordinate
system. We have drawn this explicity below and the angle we will calculate is labeled
α.
82
8
3
6
α
0
0 1 2 3 4 5 6 7 8
Using our known trigonometric ratios we can calculate the value of α;
6
tan α =
8
6
α = arctan
8
α = 36.8o .
Our final answer is a resultant of 10 units at 36.8o to the positive x-axis.
4.8 Do I really need to learn about vectors? Are they

really useful?
Vectors are essential to do physics. Absolutely essential. This is an important warning. If
something is essential we had better stop for a moment and make sure we understand it properly.
4.9 Summary of Important Quantities, Equations and Con-

cepts
Vector A vector is a measurement which has both magnitude and direction.
Displacement Displacement is a vector with direction pointing from some initial (starting)
point to some final (end) point and whose magnitude is the straight-line distance from the
starting point to the final point.
83
Distance The distance travelled is the length of your actual path.
Velocity Velocity is the rate of change of displacement with respect to time.
Acceleration Acceleration is the rate of change of velocity with respect to time.
Resultant The resultant of a number of vectors is the single vector whose effect is the same as
the individual vectors acting together.

Displacement →
−s m X
Velocity →
−
u ,→
−v m.s−1 X
Distance d m –
Speed v m.s−1 –
Acceleration →
−a m.s−2 X
Table 4.1: Summary of the symbols and units of the quantities used in Vectors
84
Chapter 5
Forces

• introduce concept of a system for use in momentum- in NIII for instance, also concept of
isolated system and external forces
• add incline plane examples
• generally ‘bulk-up’ the Newton’s Laws sections
5.2 What is a force?

The simplest answer is to say a ‘push’ or a ‘pull’. If the force is great enough to overcome
friction the object being pushed or pulled will move. We could say a force is something that
makes objects move. Actually forces give rise to accelerations!
In fact, the acceleration of a body is directly proportional to the net force acting on it. The
word net is important– forces are vectors and what matters in any situation is the vector sum of
all the forces acting on an object.
The unit of force is the newton (symbol N ). It is named after Sir Isaac Newton, whose three
laws you will learn about shortly.
Interesting Force was first described by Archimedes. Archimedes of Syracuse (circa 287 BC - 212
Fact: BC), was a Greek mathematician, astronomer, philosopher, physicist and engineer. He
was killed by a Roman soldier during the sack of the city, despite orders from the Roman
general, Marcellus, that he was not to be harmed.
5.3 Force diagrams

The resultant force acting on an object is the vector sum of the set of forces acting on that one
object. It is very important to remember that all the forces must be acting on the same object.
85
The easiest way to determine this resultant force is to construct what we call a force diagram.
In a force diagram we represent the object by a point and draw all the force vectors connected
to that point as arrows. Remember from Chapter ?? that we use the length of the arrow to
indicate the vector’s magnitude and the direction of the arrow to show which direction it acts in.
The second step is to rearrange the force vectors so that it is easy to add them together and
find the resultant force.
Let us consider an example to get started:
Two people push on a box from opposite sides with a force of 5N .
5N 5N
When we draw the force diagram we represent the box by a dot. The two forces are represented
by arrows, with their tails on the dot.
Force Diagram:
5N 5N

See how the arrows point in opposite directions and have the same magnitude (length). This
means that they cancel out and there is no net force acting on the object.
This result can be obtained algebraically too, since the two forces act along the same line.
Firstly we choose a positive direction and then add the two vectors taking their directions into
account.
Consider to the right as the positive direction

Fres = (+5N ) + (−5N )
= 0N
As you work with more complex force diagrams, in which the forces do not exactly balance,
you may notice that sometimes you get a negative answer (e.g. −2N ). What does this mean? Always rememb
Does it mean that we have something the opposite of force? No, all it means is that the force acts to check your
in the opposite direction to the one that you chose to be positive. You can choose the positive signs
direction to be any way you want, but once you have chosen it you must keep it.
Once a force diagram has been drawn the techniques of vector addition introduced in the
previous chapter can be implemented. Depending on the situation you might choose to use a
graphical technique such as the tail-to-head method or the parallelogram method, or else an
algebraic approach to determine the resultant. Since force is a vector all of these methods apply!
Worked Example 14
Single Force on a block
Question: A block on a frictionless flat surface weighs 100N . A 75N force is applied
to the block towards the right. What is the net force (or resultant force) on the block?
Answer:
86
Step 1 : Firstly, draw a force diagram for the block
Fnormal = 100N

Fapplied = 75N
Fweight = 100N
Be careful not to forget the two forces perpendicular to the surface. Every object
with mass is attracted to the centre of the earth with a force (the object’s weight).
However, if this were the only force acting on the block in the vertical direction
then the block would fall through the table to the ground. This does not happen
because the table exerts an upward force (the normal force) which exactly balances
the object’s weight.
Step 2 : Answer
Thus, the only unbalanced force is the applied force. This applied force is then the
resultant force acting on the block.
5.4 Equilibrium of Forces

At the beginning of this chapter it was mentioned that resultant forces cause objects to acceler-
ate. If an object is stationary or moving at constant velocity then either,
• no forces are acting on the object, or

• the forces acting on that object are exactly balanced.
A resultant force would cause a stationary object to start moving or an object moving at
constant velocity to speed up or slow down.
Objects at re
or moving wi
In other words, for stationary objects or objects moving with constant velocity, the resultant
constant veloc
force acting on the object is zero. The object is said to be in equilibrium.
are in equilibr
If a resultant force acts on an object then that object can be brought into equilibrium by
and have a ze
applying an additional force that exactly balances this resultant. Such a force is called the
resultant for
equilibrant and is equal in magnitude but opposite in direction to the original resultant force
acting on the object.
Definition: The equilibrant of any number of forces is the single force

required to produce equilibrium.
87
−
→
F1
−
→
Resultant of F3
−
→ −
→ Equilibrant of
F1 and F2 −
→ −
→
F1 and F2
−
→
F2
−
→ −
→ −
→ −
→
In the figure the resultant of F1 and F2 is shown in red. The equilibrant of F1 and F2 is then
−→
the vector opposite in direction to this resultant with the same magnitude (i.e. F3 ).
−
→ − → −
→
• F1 , F2 and F3 are in equilibrium
−
→ −
→ −
→
• F3 is the equilibrant of F1 and F2
−
→ −→ −
→
• F1 and F2 are kept in equilibrium by F3
As an example of an object in equilibrium, consider an object held stationary by two ropes

in the arrangement below:
50o 40o
Rope 1 Rope 2
Let us draw a force diagram for the object. In the force diagram the object is drawn as a dot
and all forces acting on the object are drawn in the correct directions starting from that dot. In
this case, three forces are acting on the object.
88
50o
−
→ 40o
T1 −
→
T2

−
→
W
Each rope exerts a force on the object in the direction of the rope away from the object.
−
→ −
→
These tension forces are represented by T1 and T2 . Since the object has mass, it is attracted
−→
towards the centre of the earth. This weight is represented in the force diagram as W .
Since the object is stationary, the resultant force acting on the object is zero. In other words
the three force vectors drawn tail-to-head form a closed triangle:
40o
−
→
T2
50o −
→
W
−
→
T1
In general, when drawn tail-to-head the forces acting on an object in equilibrium form a
closed figure with the head of the last vector joining up with the tail of the first vector. When
only three forces act on an object this closed figure is a triangle. This leads to the triangle law
for three forces in equilibrium:
Triangle Law for Three Forces in Equilibrium:

Three forces in equilibrium can be represented in magnitude and
direction by the three sides of a triangle taken in order.
Worked Example 15
89
Equilibrium
Question: A car engine of weight 2000N is lifted by means of a chain and pulley
system. In sketch A below, the engine is suspended by the chain, hanging station-
ary. In sketch B, the engine is pulled sideways by a mechanic, using a rope. The
engine is held in such a position that the chain makes an angle of 30o with the verti-
cal. In the questions that follow, the masses of the chain and the rope can be ignored.
30o
CHAIN CHAIN
ROPE
ENGINE
ENGINE
Sketch A Sketch B
i) Draw a force diagram representing the forces acting on the engine in sketch A.
ii) Determine the tension in the chain in sketch A.
iii) Draw a force diagram representing the forces acting on the engine in sketch B.
ii) In sketch B determine the magnitude of the applied force and the tension in the
chain.
Answer:
Step 1 : Force diagram for sketch A

i) Just two forces are acting on the engine in sketch A:
−
→
T chain
−
→
W
90
Step 2 : Determine the tension in the chain
ii) Since the engine in sketch A is stationary, the resultant force on the engine is zero.
Thus the tension in the chain exactly balances the weight of the engine,
Tchain = W
= 2000N
Step 3 : Force diagram for sketch B
iii) Three forces are acting on the engine in sketch B:
→
−
F applied
30o
−
→
→
− W
T chain
30o
Since the engine is at equilibrium (it is held stationary) the three forces drawn tail-
to-head form a closed triangle.
Step 4 : Calculate the magnitude of the forces in sketch B
iv) Since no method was specified let us calculate the magnitudes algebraically. Since
the triangle formed by the three forces is a right-angle triangle this is easily done:
Fapplied
= tan 30o
W
Fapplied = (2000) tan 30o
= 1155 N
and
Tchain 1
=
W cos 30o
2000
Tchain =
cos 30o
= 2309 N
5.5 Newton’s Laws of Motion

Our current laws of motion were discovered by Sir Isaac Newton. It is said that Sir Isaac Newton
started to think about the nature of motion and gravitation after being struck on the head by a
falling apple.
Newton discovered 3 laws describing motion:
91
5.5.1 First Law
Definition: Every object will remain at rest or in
uniform motion in a straight line unless it is made
to change its state by the action of an external force.
For example, a cement block isn’t going to move unless you push it. A rocket in space is not
going to speed up, slow down nor change direction unless the engines are switched on.
Newton’s First Law may seem rather surprising to you when you first meet it. If you roll
a ball along a surface it always stops, but Newton’s First Law says that an item will remain
in uniform motion in a straight line unless a force acts upon it. It doesn’t seem like there is
any force acting on the ball once you let it go, but there is! In real life (unlike many physics
problems) there is usually friction acting. Friction is the external force acting on the ball causing
it to stop.
Notice that Newton’s First Law says that the force must be external. For example, you can’t
grab your belt and pull yourself up to the ceiling. Of course, you could get someone else to pull
you up, but then that person would be applying an external force.
Worked Example 16
Newton’s First Law in action
Question: Why do passengers get thrown to the side when the car they are driving
in goes around a corner?
Answer: Newton’s First Law
Step 1 : What happens before the car turns
Before the car starts turning both you and the car are travelling at the same velocity.
(picture A)
Step 2 : What happens while the car turns
The driver turns the wheels of the car, which then exert a force on the car and the
car turns. This force acts on the car but not you, hence (by Newton’s First Law) you
continue moving with the same velocity. (picture B)
Step 3 : Why passengers get thrown to the side
If the passenger is wearing a seatbelt it will exert a force on the passenger until the
passenger’s velocity is the same as that of the car (picture C). Without a seatbelt the
passenger may hit the side of the car or even the windscreen!
92

C: Both the car and

A: Both the car and
B: The cars turns but the person are travel-
the person travelling at
not the person ling at the same veloc-
the same velocity
ity again
5.5.2 Second Law

Definition: The resultant force acting on a body results in
an acceleration which is in the same direction as the resultant force
and is directly proportional to the magnitude of this force and
inversely proportional to the mass of the object.
In mathematical form this law states,

→
−
F Res = m→
−
a (5.1)
→
−
So if a resultant force F Res acts on an object with mass m it will result in an acceleration → −
a.
It makes sense that the direction of the acceleration is in the direction of the resultant force. If
you push something away from you it doesn’t move toward you unless of course there is another
force acting on the object towards you!
Worked Example 17
Newton’s Second Law
Question: A block of mass 10kg is accelerating at 2m.s−2 . What is the magnitude

of the resultant force acting on the block?
Answer:
Step 1 : Decide what information has been supplied
We are given
• the block’s mass
• the block’s acceleration
all in the correct units.
93
Step 2 : Determine the force on the block
We are asked to find the magnitude of the force applied to the block. Newton’s Second
Law tells us the relationship between acceleration and force for an object. Since we
are only asked for the magnitude we do not need to worry about the directions of the
vectors:
FRes = ma
= 10kg × 2m.s−2
= 20N
Thus, there must be a resultant force of 20N acting on the box.
Worked Example 18
Newton’s Second Law 2
Question: A 12N force is applied in the positive x-direction to a block of mass

100mg resting on a frictionless flat surface. What is the resulting acceleration of the
block?
Answer:
We are given
• the applied force
but the mass is not in the correct units.
Step 2 : Convert the mass into the correct units
100mg = 100 × 10−3 g = 0.1g

1000g = 1kg
1
1 = 1kg ×
1000g
1kg
=
1000g
0.1g = 0.1g × 1
1kg
= 0.1g ×
1000g
= 0.0001 kg
Step 3 : Determine the direction of the acceleration

We know that net force results in acceleration. Since there is no friction the applied
force is the resultant or net force on the block (refer to the earlier example of the block
pushed on the surface of the table). The block will then accelerate in the direction
of this force according to Newton’s Second Law.
94
Step 4 : Determine the magnitude of the acceleration
FRes = ma
12N = (0.0001kg)a
12N
a =
0.0001kg
N
= 120000
kg
kg.m
= 120000 2
s .kg
m
= 120000 2
s
= 1.2 × 105 m.s−2
From Newton’s Second Law the direction of the acceleration is the same as that of the
resultant force. The final result is then that the block accelerates at 1.2 × 10 5 m.s−2
in the positive x-direction.
Weight and Mass

You must have heard people saying “My weight is 60kg”. This is actually incorrect because it is
mass that is measured in kilograms. Weight is the force of gravity exerted by the earth on an
object with mass:
Fweight = mg (5.2)
As such, weight is measured in newtons.
If you compare this equation to Newton’s Second Law you will see that it looks exactly the
same with the a replaced by g. Thus, when weight is the only force acting on an object (i.e.
when Fweight is the resultant force acting on the object) the object has an acceleration g. Such
an object is said to be in free fall. The value for g is the same for all objects (i.e. it is independent
of the objects mass):
g = 9.8ms−2 ≈ 10ms−2 (5.3)

You will learn how to calculate this value from the mass and radius of the earth in Chapter
??. Actually the value of g varies slightly from place to place on the earth’s surface.
The reason that we often get confused between weight and mass, is that scales measure your
weight (in newtons) and then display your mass using the equation above.
(NOTE TO SELF: include example of skydiver- calculate the acceleration before and after
opening parachute– free-fall and then negative acceleration)
Worked Example 19
Calculating the resultant and then the acceleration
95
Question: A block (mass 20kg) on a frictionless flat surface has a 45N force applied
to it in the positive x-direction. In addition a 25N force is applied in the negative
x-direction. What is the resultant force acting on the block and the acceleration of
the block?
Answer:
We are given
• Force F1 = 45N in the positive x-direction
• Force F2 = 25N in the negative x-direction
Step 2 : Figure out how to tackle the problem
We are asked to determine what happens to the block. We know that net force results
in an acceleration. We need to determine the net force acting on the block.
Step 3 : Determine the magnitude and direction of the resultant force
Since F1 and F2 act along the same straight line, we can apply the algebraic technique
of vector addition discussed in the Vectors chapter to determine the resultant force.
Choosing the positive x-direction as our positive direction:
Positive x-direction is the positive direction:
FRes = (+45N ) + (−25N )

= +20N
= 20N in the positive x − direction
where we remembered in the last step to include the direction of the resultant force
in words. By Newton’s Second Law the block will accelerate in the direction of this
resultant force.
Step 4 : Determine the magnitude of the acceleration
FRes = ma
20N = (20kg)a
20N
a =
20kg
N
= 1
kg
kg.m
= 1 2
s .kg
= 1 m.s−2
The final result is then that the block accelerates at 1 m.s−2 in the positive x-direction
(the same direction as the resultant force).
96
Worked Example 20
Block on incline
Question: insert question here maybe with friction!
θ W⊥
mg
θ Wk
5.5.3 Third Law

Definition: For every force or action there is an equal
but opposite force or reaction.
Newton’s Third Law is easy to understand but it can get quite difficult to apply it. An
important thing to realise is that the action and reaction forces can never act on the same object
and hence cannot contribute to the same resultant.
Worked Example 21
Identifying action-reaction pairs
Question: Consider pushing a box on the surface of a rough table.

1. Draw a force diagram indicating all of the forces acting on the box.
2. Identify the reaction force for each of the forces acting on the box.
Answer:
1. The following force diagram shows all of the forces acting on the box
97
Remember to d
the object in y
force diagram a
dot
Fnormal
Fpush
Ff riction
Fweight
2. The following table lists each of forces acting on the box (the actions) together
with their corresponding reactions:
Action Reaction
Fpush : Person pushing Box pushing
on the box on the person
Fweight : The earth attracting The box attracting
the box (the weight) the earth
Fnormal : The box pushing on The table pushing
the table on the box
Ff riction : The table acting on The box acting on
the box the table
Notice that to find the reaction force you need to switch around the object
supplying the force and the object receiving the force. Be careful not to think
that the normal force is the reaction partner to the weight of the box. The
normal force balances the weight force but they are both forces acting on the
box so they cannot possibly form an action-reaction pair.
There is an important thing to realise which is related to Newton’s Third Law. Think about
dropping a stone off a cliff. It falls because the earth exerts a force on it (see Chapter ??) and it
doesn’t seem like there are any other forces acting. So is Newton’s Third Law wrong? No, the
reactionary force to the weight of the stone is the force exerted by the stone on the earth. This
is illustrated in detail in the next worked example.
Worked Example 22
Newton’s Third Law
Question: A stone of mass 0.5kg is accelerating at 10 m.s−2 towards the earth.
98
1. What is the force exerted by the earth on the stone?
2. What is the force exerted by the stone on the earth?
3. What is the acceleration of the earth, given that its mass is 5.97 × 1027 kg?
Answer:
1. Step 1 : Decide what information has been supplied
We are given
• the stone’s mass
• the stone’s acceleration (g)
Step 2 : The force applied by the earth on the stone
This force is simply the weight of the stone.
Step 3 : The magnitude of the force of the earth on the stone
Applying Newton’s Second Law, we can find the magnitude of this force,
FRes = ma
= 0.5kg × 10 m.s−2
= 5N
Therefore the earth applies a force of 5N towards the earth on the stone.
2. By Newton’s Third Law the stone must exert an equal but opposite force on the
earth. Hence the stone exerts a force of 5N towards the stone on the earth.
3. We have
• the force acting on the earth
• the earth’s mass
in the correct units
Step 4 : To find the earth’s acceleration we must apply Newton’s Second Law to
find the magnitude
FRes = ma
5N = (5.97 × 1027 kg)a
5N
a =
5.97 × 1027 kg
= 8.37521 × 10−28 m.s−2
The earth’s acceleration is directed towards the stone (i.e. in the same direction
as the force on the earth). The earth’s acceleration is really tiny. This is why
you don’t notice the earth moving towards the stone, even though it does.
99
Interesting Newton first published these laws in Philosophiae Naturalis Principia Mathematica (1687)
Fact: and used them to prove many results concerning the motion of physical objects. Only in
1916 were Newton’s Laws superceded by Einstein’s theory of relativity.
The next two worked examples are quite long and involved but it is very important that you
understand the discussion as they illustrate the importance of Newton’s Laws.
Worked Example 23
Rockets
Question: How do rockets accelerate in space?
Answer:
• Gas explodes inside the rocket.
• This exploding gas exerts a force on each side of the rocket (as shown in the
picture below of the explosion chamber inside the rocket).
Note that the forces shown in this picture are

representative. With an explosion there will
be forces in all directions.
• Due to the symmetry of the situation, all the forces exerted on the rocket are
balanced by forces on the opposite side, except for the force opposite the open
side. This force on the upper surface is unbalanced.
• This is therefore the resultant force acting on the rocket and it makes the rocket
accelerate forwards.
Systems and External Forces

The concepts of a system and an external forces are very important in physics. A system is any
collection of objects. If one draws an imaginary box around such a system then an external force
is one that is applied by an object or person outside the box. Imagine for example a car pulling
a trailer.
100
5.6 Examples of Forces Studied Later
Most of physics revolves around forces. Although there are many different forces we deal with
them all in the same way. The methods to find resultants and acceleration do not depend on the
type of force we are considering.
At first glance, the number of different forces may seem overwhelming - gravity, drag, electrical
forces, friction and many others. However, physicists have found that all these forces can be
classified into four groups. These are gravitational forces, electromagnetic forces, strong nuclear
force and weak nuclear force. Even better, all the forces that you will come across at school are
either gravitational or electromagnetic. Doesn’t that make life easy?
5.6.1 Newtonian Gravity

Gravity is the attractive force between two objects due to the mass of the objects. When you
throw a ball in the air, its mass and the earth’s mass attract each other, which leads to a force
between them. The ball falls back towards the earth, and the earth accelerates towards the
ball. The movement of the earth toward the ball is, however, so small that you couldn’t possibly
measure it.
5.6.2 Electromagnetic Forces

Almost all of the forces that we experience in everyday life are electromagnetic in origin. They
have this unusual name because long ago people thought that electric forces and magnetic forces
were different things. After much work and experimentation, it has been realised that they are
actually different manifestations of the same underlying theory.
The Electric Force

If we have objects carrying electrical charge, which are not moving, then we are dealing with
electrostatic forces (Coulomb’s Law). This force is actually much stronger than gravity. This may
seem strange, since gravity is obviously very powerful, and holding a balloon to the wall seems
to be the most impressive thing electrostatic forces have done, but think about it: for gravity
to be detectable, we need to have a very large mass nearby. But a balloon rubbed in someone’s
hair can stick to a wall with a force so strong that it overcomes the force of gravity—with just
the charges in the balloon and the wall!
Magnetic force
The magnetic force is a different manifestation of the electromagnetic force. It stems from the
interaction between moving charges as opposed to the fixed charges involved in Coulomb’s Law.
Examples of the magnetic force in action include magnets, compasses, car engines, computer
data storage and your hair standing on end. Magnets are also used in the wrecking industry to
pick up cars and move them around sites.
101
Friction
We all know that Newton’s First Law states that an object moving without a force acting on it
will keep moving. Then why does a box sliding on a table stop? The answer is friction. Friction
arises from the interaction between the molecules on the bottom of a box with the molecules on
a table. This interaction is electromagnetic in origin, hence friction is just another view of the
electromagnetic force. The great part about school physics is that most of the time we are told
to neglect friction but it is good to be aware that there is friction in the real world.
Friction is also useful sometimes. If there was no friction and you tried to prop a ladder up
against a wall, it would simply slide to the ground. Rock climbers use friction to maintain their
grip on cliffs.
Drag Force
This is the force an object experiences while travelling through a medium. When something
travels through the air it needs to displace air as it travels and because of this the air exerts a
force on the object. This becomes an important force when you move fast and a lot of thought
is taken to try and reduce the amount of drag force a sports car experiences.
The drag force is very useful for parachutists. They jump from high altitudes and if there
was no drag force, then they would continue accelerating all the way to the ground. Parachutes
are wide because the more surface area you show, the greater the drag force and hence the slower
you hit the ground.

cepts
Equilibrium Objects at rest or moving with constant velocity are in equilibrium and have a
zero resultant force.
Equilibrant The equilibrant of any number of forces is the single force required to produce
equilibrium.
Triangle Law for Forces in Equilibrium Three forces in equilibrium can be represented in
magnitude and direction by the three sides of a triangle taken in order.
Newton’s First Law Every object will remain at rest or in uniform motion in a straight line
unless it is made to change its state by the action of an external force.
Newton’s Second Law The resultant force acting on a body results in an acceleration which
is in the same direction as the resultant force and is directly proportional to the magnitude
of this force and inversely proportional to the mass of the object.

Mass m kg —
Acceleration →
−
a m.s−2 X
→
−
Force F kg.m.s−2 or N X
Table 5.1: Summary of the symbols and units of the quantities used in Force
102
Newton’s Third Law For every force or action there is an equal but opposite force or reaction.
103
Chapter 6
Rectilinear Motion
6.1 What is rectilinear motion?

Rectilinear motion means motion along a straight line. This is a useful topic to study for learning
how to describe the movement of cars along a straight road or of trains along straight railway
tracks. In this section you have only 2 directions to worry about: (1) along the direction of
motion, and (2) opposite to the direction of motion.
To illustrate this imagine a train heading east.

N
Train W E
P
S
If it is accelerating away from the station platform (P), the direction of acceleration is the
same as the direction of the train’s velocity - east. If it is braking the direction of acceleration is
opposite to the direction of its motion, i.e. west.
6.2 Speed and Velocity

Let’s take a moment to review our definitions of velocity and speed by looking at the worked
example below:
104
Worked Example 24
Speed and Velocity
40m
A B
30m
Question: A cyclist moves from A through B to C in 10 seconds. Calculate both

his speed and his velocity.
Answer:
The question explicitly gives
• the distance between A and B
• the distance between B and C
• the total time for the cyclist to go from A through B to C
all in the correct units! Remember
Step 2 : Determine the cyclist’s speed to check the
His speed - a scalar - will be units!
s
v =
t
30m + 40m
=
10s
m
= 7
s
Step 3 : First determine the cyclist’s resultant displacement
Since velocity is a vector we will first need to find the resultant displacement of the
cyclist. His velocity will be
→
−s
→
−
v =
t
The total displacement is the vector from A to C, and this is just the resultant of the
two displacement vectors, ie.
→
− −→ −−→ −−→
s = AC = AB + BC
105
Using the rule of Pythagoras:
q
→
−s =
2
(30m) + (40m)
2
= 50m in the direction f rom A to C
Step 4 : Now we can determine the average velocity from the displacement and the
time
50m
∴→
−
v =
10s
m
= 5 in the direction f rom A to C
s
For this cyclist, his velocity is not the same as his speed because there has been a change in
the direction of his motion. If the cyclist traveled directly from A to C without passing through
B his speed would be
50m
v =
10s
m
= 5
s
and his velocity would be
→
− 50m
v =
10s
m
= 5 in the direction f rom A to C
s
In this case where the cyclist is not undergoing any change of direction (ie. he is traveling in
a straight line) the magnitudes of the speed and the velocity are the same. This is the defining
principle of rectilinear motion.
Important: For motion along a straight line the magnitudes of speed and
velocity are the same, and the magnitudes of the distance and displacement are the same.
6.3 Graphs
In physics we often use graphs as important tools for picturing certain concepts. Below are some
graphs that help us picture the concepts of displacement, velocity and acceleration.
6.3.1 Displacement-Time Graphs

Below is a graph showing the displacement of the cyclist from A to C:
106
50 C
displacement (m)
∆→
−
s
∆t
A
time (s)10
This graphs shows us how, in 10 seconds time, the cyclist has moved from A to C. We know
∆y
the gradient (slope) of a graph is defined as the change in y divided by the change in x, i.e ∆x .
∆s→
−
In this graph the gradient of the graph is just ∆t - and this is just the expression for velocity.
Important: The slope of a displacement-time graph gives the velocity.
The slope is the same all the way from A to C, so the cyclist’s velocity is constant over the entire
displacement he travels.
In figure 6.1 are examples of the displacement-time graphs you will encounter.
displacement
displacement
displacement
a) time b) time c) time
Figure 6.1: Some common displacement-time graphs:
a) shows the graph for an object stationary over a period of time. The gradient is zero, so
the object has zero velocity.
b) shows the graph for an object moving at a constant velocity. You can see that the displace-
ment is increasing as time goes on. The gradient, however, stays constant (remember: its
the slope of a straight line), so the velocity is constant. Here the gradient is positive, so
the object is moving in the direction we have defined as positive.
c) shows the graph for an object moving at a constant acceleration. You can see that both the
displacement and the velocity (gradient of the graph) increase with time. The gradient is
increasing with time, thus the velocity is increasing with time and the object is accelerating.
107
6.3.2 Velocity-Time Graphs
Look at the velocity-time graph below:
velocity
∆→
−
v
∆t
A
time
This is the velocity-time graph of a cyclist traveling from A to B at a constant acceleration,

→
−
i.e. with steadily increasing velocity. The gradient of this graph is just ∆∆tv - and this is just
the expression for acceleration. Because the slope is the same at all points on this graph, the
acceleration of the cyclist is constant.
Important: The slope of a velocity-time graph gives the acceleration.
Not only can we get the acceleration of an object from its velocity-time graph, but we can
also get some idea of the displacement traveled. Look at the graph below:
10
velocity (m/s)
time (s) 5
This graph shows an object moving at a constant velocity of 10m/s for a duration of 5s. The
area between the graph and the time axis (the (NOTE TO SELF: SHADED) area) of the above
plot will give us the displacement of the object during this time. In this case we just need to
calculate the area of a rectangle with width 5s and height 10m/s
area of rectangle = height × width

= →
−
v ×t
m
= 10 × 5s
s
= 50m
= →
−s = displacement
108
So, here we’ve shown that an object traveling at 10m/s for 5s has undergone a displacement
of 50m.
Important: The area between a velocity-time graph and the ‘time’

axis gives the displacement of the object.
Here are a couple more velocity-time graphs to get used to:

velocity
velocity
a) time b) time
Figure 6.2: Some common velocity-time graphs:
In figure 6.2 are examples of the displacement-time graphs you may encounter.
a) shows the graph for an object moving at a constant velocity over a period of time. The
gradient is zero, so the object is not accelerating.
b) shows the graph for an object which is decelerating. You can see that the velocity is
decreasing with time. The gradient, however, stays constant (remember: its the slope of a
straight line), so the acceleration is constant. Here the gradient is negative, so the object
is accelerating in the opposite direction to its motion, hence it is decelerating.
6.3.3 Acceleration-Time Graphs

In this chapter on rectilinear motion we will only deal with objects moving at a constant accel-
eration, thus all acceleration-time graphs will look like these two:
acceleration
acceleration
a) time b) time
Here is a description of the graphs below:

a) shows the graph for an object which is either stationary or traveling at a constant velocity.
Either way, the acceleration is zero over time.
109
b) shows the graph for an object moving at a constant acceleration. In this case the acceler-
ation is positive - remember that it can also be negative.
We can obtain the velocity of a particle at some given time from an acceleration time graph -
it is just given by the area between the graph and the time-axis. In the graph below, showing an
object at a constant positive acceleration, the increase in velocity of the object after 2 seconds
corresponds to the (NOTE TO SELF: shaded) portion.
acceleration (m/s2 )
5
2
time (s)
area of rectangle = →
−
a ×t
m
= 5 2 × 2s
s
m
= 10
s
= →
−
v
Its useful to remember the set of graphs below when working on problems. Figure 6.3 shows
how displacement, velocity and time relate to each other. Given a displacement-time graph like
the one on the left, we can plot the corresponding velocity-time graph by remembering that the
slope of a displacement-time graph gives the velocity. Similarly, we can plot an acceleration-time
graph from the gradient of the velocity-time graph.
110
Displacement Velocity Acceleration
Figure 6.3: A Relationship Between Displacement, Velocity and Acceleration
6.3.4 Worked Examples
Worked Example 25
Relating displacement-, velocity-, and acceleration-time graphs
Question: Given the displacement-time graph below, draw the corresponding velocity-
time and acceleration-time graphs, and then describe the motion of the object.
displacement (m)
0 2 time (s) 4 6
Answer:
Step 1 : Decide what information is supplied
The question explicitly gives a displacement-time graph.
Step 2 : Decide what is asked?
3 things are required:
1. Draw a velocity-time graph
2. Draw an acceleration-time graph
111
3. Describe the behaviour of the object
Step 3 : Velocity-time graph - 0-2 seconds
For the first 2 seconds we can see that the displacement remains constant - so the
object is not moving, thus it has zero velocity during this time. We can reach this
conclusion by another path too: remember that the gradient of a displacement-time
graph is the velocity. For the first 2 seconds we can see that the displacement-time
graph is a horizontal line, ie. it has a gradient of zero. Thus the velocity during this
time is zero and the object is stationary.
For the next 2 seconds, displacement is increasing with time so the object is moving.
Looking at the gradient of the displacement graph we can see that it is not constant.
In fact, the slope is getting steeper (the gradient is increasing) as time goes on.
Thus, remembering that the gradient of a displacement-time graph is the velocity,
the velocity must be increasing with time during this phase.
For the final 2 seconds we see that displacement is still increasing with time, but
this time the gradient is constant, so we know that the object is now travelling at a
constant velocity, thus the velocity-time graph will be a horizontal line during this
stage.
So our velocity-time graph looks like this one below. Because we haven’t been given
any values on the vertical axis of the displacement-time graph, we cannot figure
out what the exact gradients are and hence what the values of the velocity are. In
this type of question it is just important to show whether velocities are positive or
negative, increasing, decreasing or constant.
velocity (m/s)
0 2 time (s) 4 6
Once we have the velocity-time graph its much easier to get the acceleration-time
graph as we know that the gradient of a velocity-time graph is the just the accelera-
tion.
Step 6 : Acceleration-time graph - 0-2 seconds
For the first 2 seconds the velocity-time graph is horizontal at zero, thus it has a
gradient of zero and there is no acceleration during this time. (This makes sense
because we know from the displacement time graph that the object is stationary
during this time, so it can’t be accelerating).
Step 7 : Acceleration-time graph - 2-4 seconds
For the next 2 seconds the velocity-time graph has a positive gradient. This gradient
is not changing (i.e. its constant) throughout these 2 seconds so there must be a
112
constant positive acceleration.
Step 8 : Accleration-time graph - 4-6 seconds
For the final 2 seconds the object is traveling with a constant velocity. During this
time the gradient of the velocity-time graph is once again zero, and thus the object
is not accelerating.
The acceleration-time graph looks like this:
acceleration (m/s2 )
0 2 time (s) 4 6
Step 9 : A description of the object’s motion

A brief description of the motion of the object could read something like this: At
t = 0s and object is stationary at some position and remains stationary until t = 2s
when it begins accelerating. It accelerates in a positive direction for 2 seconds until
t = 4s and then travels at a constant velocity for a further 2 seconds.
Worked Example 26
Calculating distance from a velocity-time graph
Question: The velocity-time graph of a car is plotted below. Calculate the displace-
ment of the car has after 15 seconds.
113
4
velocity (m/s)
15
5 time (s) 12
-2
Answer:
We are asked to calculate the displacement of the car. All we need to remember
here is that the area between the velocity-time graph and the time axis gives us the
displacement.
Step 2 : Determine the area under the velocity-time graph
For t = 0s to t = 5s this is the triangle on the left:
1
Area4 = b×h
2
1
= 5s × 4m/s
2
= 10m
For t = 5s to t = 12s the displacement is equal to the area of the rectangle
Area¤ = w×h
= 7s × 4m/s
= 28m
For t = 12s to t = 14s the displacement is equal to the area of the triangle above the
time axis on the right
1
Area4 = b×h
2
1
= 2s × 4m/s
2
= 4m
For t = 14s to t = 15s the displacement is equal to the area of the triangle below the
114
time axis
1
Area4 = b×h
2
1
= 1s × 2m/s
2
= 1m
Step 3 : Determine the total displacement of the car
Now the total displacement of the car is just the sum of all of these areas. HOW-
EVER, because in the last second (from t = 14s to t = 15s) the velocity of the car is
negative, it means that the car was going in the opposite direction, i.e. back where
it came from! So, to get the total displacement, we have to add the first 3 areas
(those with positive displacements) and subtract the last one (because it signifies a
displacement in the opposite direction).
→
−s = 10 + 28 + 4 − 1
= 41m in the positive direction
Worked Example 27
Velocity from a displacement-time graph
Question: Given the diplacement-time graph below,

1. what is the velocity of the object during the first 4 seconds?
2. what is the velocity of the object from t = 4s to t = 7s?
2
s (m)
t (s) 4 7
Answer:
Step 1 : The velocity during the first 4 seconds
The velocity is given by the slope of a displacement-time graph. During the first 4
seconds, this is
→
− ∆s
v =
∆t
2m
=
4s
= 0.5m/s
115
Step 2 : The velocity during the last 3 seconds
For the last 3 seconds we can see that the displacement stays constant, and that the
gradient is zero. Thus →
−v = 0m/s
Worked Example 28
From an acceleration-time graph to a velocity-time graph
Question: Given the acceleration-time graph below, assume that the object starts
from rest and draw its velocity-time graph.
2
a (m/s2 )
4 t (s)
2 6
-2
Answer: Once again attempt to draw the graph in time sections, i.e. first draw
the velocity-time graph for the first 2 seconds, then for the next 2 seconds and so on.
4
v (m/s)
2 4 6
t (s)
116
6.4 Equations of Motion
This section is about solving problems relating to uniformly accelerated motion. We’ll first
introduce the variables and the equations, then we’ll show you how to derive them, and after
that we’ll do a couple of examples.
u = starting velocity (m/s) at t = 0

v = final velocity (m/s) at time t
s = displacement (m)
t = time (s)
a = acceleration (m/s2 )
v =u + at (6.1)
(u + v)
s = t (6.2)
2
1
s = ut + at2 (6.3)
2
v 2 = u2 + 2as (6.4)
Make sure you can rhyme these off, they are very important! There are so many different
types of questions for these equations. Basically when you are answering a question like this:
1. Find out what values you have and write them down.
2. Figure out which equation you need.
3. Write it down!!!
4. Fill in all the values you have and get the answer.
Interesting Galileo Galilei of Pisa, Italy, was the first to determined the correct mathematical law
Fact: for acceleration: the total distance covered, starting from rest, is proportional to the
square of the time. He also concluded that objects retain their velocity unless a force
– often friction – acts upon them, refuting the accepted Aristotelian hypothesis that
objects ”naturally” slow down and stop unless a force acts upon them. This principle was
incorporated into Newton’s laws of motion (1st law).
Equation 6.1
By the definition of acceleration
∆v
a=
t
117
where ∆v is the change in velocity, i.e. ∆v = v − u. Thus we have
v−u
a =
t
v = u + at
Equation 6.2
In the previous section we saw that displacement can be calculated from the area between a
velocity-time graph and the time-axis. For uniformly accelerated motion the most complicated
velocity-time graph we can have is a straight line. Look at the graph below - it represents an
object with a starting velocity of u, accelerating to a final velocity v over a total time t.
velocity (m/s)
t
time (s)
To calculate the final displacement we must calculate the area under the graph - this is just
the area of the rectangle added to the area of the triangle. (NOTE TO SELF: SHADING)
1
Area4 = b×h
2
1
= t × (v − u)
2
1 1
= vt − ut
2 2
Area¤ = w×h
= t×u
= ut
Displacement = Area¤ + Area4

1 1
s = ut + vt − ut
2 2
(u + v)
= t
2
Equation 6.3
This equation is simply derived by eliminating the final velocity v in equation 6.2. Remembering
from equation 6.1 that
v = u + at
118
then equation 6.2 becomes
u + u + at
s = t
2
2ut + at2
=
2
1
= ut + at2
2
Equation 6.4
This equation is just derived by eliminating the time variable in the above equation. From
Equation 6.1 we know
v−u
t=
a
Substituting this into Equation 6.3 gives
v−u 1 v−u 2
s = u( ) + a( )
a 2 a
uv u2 1 v 2 − 2uv + u2
= − + a( )
a a 2 a2
uv u2 v2 uv u2
= − + − +
a a 2a a 2a
2as = −2u2 + v 2 + u2
v2 = u2 + 2as (6.5)
This gives us the final velocity in terms of the initial velocity, acceleration and displacement
and is independent of the time variable.
Worked Example 29
Question: A racing car has an initial velocity of 100m/s and it covers a displacement
of 725m in 10s. Find its acceleration.
Answer:
We are given the quantities u, s and t - all in the correct units. We need to find a.
Step 2 : Find an equation of motion relating the given information to the acceleration
We can use equation 6.3
1
s = ut + at2
2
Step 3 : Rearrange the equation if needed
We want to determine the acceleration so we rearrane equation 6.3 to put acceleration
on the left of the equals sign:
2(s − ut)
a=
t2
119
Step 4 : Do the calculation
Substituting in the values of the known quantities this becomes
2(725m − 100 m s · 10s)
a = 2 2
10 s
2(−275m)
=
100s2
m
= −5.5 2
s
The racing car is accelerating at -5.5 sm2 , or we could say it is decelerating at 5.5 sm2 .
Worked Example 30
Question: An object starts from rest, moves in a straight line with a constant
acceleration and covers a distance of 64m in 4s. Calculate
• its acceleration
• its final velocity
• at what time the object had covered half the total distance
• what distance the object had covered in half the total time.
Answer:
We are given the quantities u, s and t in the correct units.
Step 2 : Acceleration: Find an equation to calculate the acceleration and rearrange
To calculate the acceleration we can use equation 6.3.
Step 3 : Rearrange to make a subject of the formula
2(s − ut)
a=
t2
Substituting in the values of the known quantities this becomes
2(64m − 0 m s 4s
a =
42 s 2
128m
=
16s2
m
= 8 2
s
Step 5 : Final velocity: Find an equation to calculate the final velocity
We can use equation 6.1 - remember we now also know the acceleration of the object.
v = u + at
120
m m
v = 0 + (8 2 )(4s)
s s
m
= 32
s
Step 7 : Time at half the distance: Find an equation to relate the unknown and known
quantities
Here we have the quantities s, u and a so we do this in 2 parts, first using equation
6.4 to calculate the velocity at half the distance, i.e. 32m:
v2 = u2 + 2as
= (0m)2 + 2(8m/s2 )(32m)
= 512m2 /s2
v = 22.6m/s
Now we can use equation 6.2 to calculate the time at this distance:
2s
t =
u+v
(2)(32m)
=
0m/s + 22.6m/s
= 2.8s
Step 8 : Distance at half the time: Find an equation to relate the distance and time
To calculate the distance the object has covered in half the time. Half the time is 2s.
Thus we have u, a and t - all in the correct units. We can use equation 6.3 to get the
distance:
1
s = ut + at2
2
1 m
= (0m/s)(2s) + (8 2 )(2s)2
2 s
= 16m
Worked Example 31
Question: A ball is thrown vertically upwards with a velocity of 10m/s from the
balcony of a tall building. The balcony is 15m above the ground and gravitational
accleration is 10m/s2 . Find a) the time required for the ball to hit the ground, and
b) the velocity with which it hits the ground.
Answer:
Step 1 : Draw a rough sketch of the problem
In most cases helps to make the problem easier to understand if we draw ourselves a
picture like the one below:
121
v1 u2
s1
a1 , a 2
balcony u1
s2
v2
ground
where the subscript 1 refers to the upward part of the ball’s motion and the subscript
2 refers to the downward part of the ball’s motion.
First the ball goes upwards with gravitational acceleration slowing it until it reaches
its highest point - here its speed is 0m/s - then it begins descending with gravitational
acceleration causing it to increase its speed on the way down. We can separate the
motion into 2 stages:
Stage 1 - the upward motion of the ball
Stage 2 - the downward motion of the ball.
We’ll choose the upward direction as positive - this means that gravitation acceleraton
is negative. We have used this and we’ll begin by solving for all the variables of Stage
1.
Step 3 : For Stage 1, decide what information is given
We have these quantities:
u1 = 10m/s
v1 = 0m/s
a1 = −10m/s2
t1 = ?
s1 = ?
Step 4 : Find the time for stage 1

Using equation 6.1 to find t1 :
v1 = u 1 + a 1 t1
v1 − u 1
t1 =
a1
0m/s − 10m/s
=
−10m/s2
= 1s
Step 5 : Find the distance travelled during stage 1
122
We can find s1 by using equation 6.4
v12 = u21 + 2a1 s1

v12 − u21
s1 =
2a
(0m/s)2 − (10m/s)2
=
2(−10m/s2 )
= 5m
Step 6 : For Stage 2, decide what information is supplied

For Stage 2 we have the following quantities:
u2 = 0m/s
v2 = ?
a2 = −10m/s2
t2 = ?
s2 = −15m − 5m = 20m
Step 7 : Determine the velocity at the end of stage 2

We can determine the final velocity v2 using equation 6.4:
v22 = u22 + 2a2 s2

= (0m/s)2 + 2(−10m/s2 )(−20m)
= 400(m/s)2
v2 = 20m/s downwards
Step 8 : Determind the time for stage 2

Now we can determine the time for Stage 2, t2 , from equation 6.1:
v2 = u 2 + a 2 t2
v2 − u 2
t2 =
a2
−20m/s − 0m/s
=
−10m/s2
= 2s
Step 9 : Quote the answers to the problem

Finally,
a) the time required for the stone to hit the ground is t = t1 + t2 = 1s + 2s = 3s
b) the velocity with which it hits the ground is just v2 = −20m/s
These questions do not have the working out in them, but they are all done in the manner
described on the previous page.
Question: A car starts off at 10 m/s and accelerates at 1 m/s2 for 10 seconds. What is it’s final
velocity?
Answer: 20 m/s
123
Question: A car starts from rest, and accelerates at 1 m/s2 for 10 seconds. How far does it
move?
Answer: 50 m
Question: A car is going 30 m/s and stops in 2 seconds. What is it’s stopping distance for this
speed?
Answer: 30 m
Question: A car going at 20 m/s stops in a distance of 20 m/s.
1. What is it’s deceleration?
2. If the car is 1 Tonne (1000 Kg, or 1 Mg) how much force do the brakes exert?
124
Units
Quantity Symbol Unit Base S.I. Units
Displacement →
−s - m + direction
Velocity →
−
u ,→
−v - m.s−1 + direction
Distance s - m
Speed v - m.s−1
Acceleration →
−a - m.s−1 + direction
Table 6.1: Units used in Rectilinear Motion
125
Chapter 7
Momentum
7.1 What is Momentum?

Momentum is a physical quantity which is closely related to forces. We will learn about this
connection a little later. Remarkably momentum is a conserved quantity. This makes momentum
extremely useful in solving a great variety of real-world problems. Firstly we must consider the
definition of momentum.
Definition: The momentum of an object is defined as its mass multiplied

by its velocity.
Mathematically,
→
−
p = m→
−
v
→
−
p : momentum (kg.m.s−1 + direction)
m : mass (kg)
→
−
v : velocity (m.s−1 + direction)
Thus, momentum is a property of a moving object and is determined by its velocity and mass.
A large truck travelling slowly can have the same momentum as a much smaller car travelling
relatively fast.
Note the arrows in the equation defining momentum– momentum is a vector with the same
Momentum is a
direction as the velocity of the object.
vector with the
same direction
Since the direction of an object’s momentum is given by the direction of its motion, one can
as the velocity.
calculate an object’s momentum in two steps:
• calculate the magnitude of the object’s momentum using,
p = mv
p : magnitude of momentum (kg.m.s−1 )

m : mass (kg)
v : magnitude of velocity (m.s−1 )
126
• include in the final answer the direction of the object’s motion
Worked Example 32
Calculating Momentum 1
Question: A ball of mass 3kg moves at 2m.s−1 to the right. Calculate the ball’s
momentum.
Answer:
• the ball’s mass, and
• the ball’s velocity Remember
in the correct units! to check
Step 2 : Decide how to tackle the problem the units!
What is being asked? We are asked to calculate the ball’s momentum. From the
definition of momentum,
→
−
p = m→
−
v,
we see that we need the mass and velocity of the ball, which we are given.
We calculate the magnitude of the ball’s momentum,
p = mv
= (3kg)(2m.s−1 ) = 6 kg.m.s−1 .

We quote the answer with the direction of the ball’s motion included,
→
−
p = 6 kg.m.s−1 to the right
Worked Example 33
Calculating Momentum 2
Question: A ball of mass 500g is thrown at 2m.s−1 . Calculate the ball’s momentum.
Answer:
• the ball’s mass, and
• the magnitude of the ball’s velocity Remember
but with the ball’s mass in the incorrect units! to check
the units!
127
What is being asked? We are asked to calculate the momentum which is defined as
→
−
p = m→
−
v.
Thus, we need the mass and velocity of the ball but we have only its mass and the
magnitude of its velocity. In order to determine the velocity of the ball we need the
direction of the ball’s motion. If the problem does not give an explicit direction we
are forced to be general. In a case like this we could say that the direction of the
velocity is in the direction of motion of the ball. This might sound silly but the lack
of information in the question has forced us to be, and we are certainly not wrong!
The ball’s velocity is then 2m.s−1 in the direction of motion.
Step 3 : Convert the mass to the correct units
1000g = 1kg
1kg
1 =
1000g
1kg
500g × 1 = 500g ×
1000g
= 0.500kg

Now, let us find the magnitude of the ball’s momentum,
p = mv
= (0.500kg)(2m.s−1 ) = 1 kg.m.s−1

Remember to include the direction of the momentum:
→
−
p = 1 kg.m.s−1 in the direction of motion of the ball
Worked Example 34
Calculating the Momentum of the Moon
Question: The moon is 384 400km away from the earth and orbits the earth in
27.3 days. If the moon has a mass of 7.35 × 1022 kg 1 what is the magnitude of its
momentum if we assume a circular orbit?
Answer:
1 This 1
is 81
of the mass of the earth
128
• the moon’s mass,
• the distance to the moon, and
• the time for one orbit of the moon Remember
with mass in the correct units but all other quantities in the incorrect units. The to check
units we require are the units!
• seconds (s) for time, and

• metres (m) for distance
What is being asked? We are asked to calculate only the magnitude of the moon’s
momentum (i.e. we do not need to specify a direction). In order to do this we require
the moon’s mass and the magnitude of its velocity, since
p = mv.
Step 3 : Find the speed or magnitude of the moon’s velocity
Speed is defined as,
Distance
speed =
time
We are given the time the moon takes for one orbit but not how far it travels in that
time. However, we can work this out from the distance to the moon and the fact
that the moon’s orbit is circular. Firstly let us convert the distance to the moon to
the correct units,
1km = 1000m
1000m
1 =
1km
1000m
384 400km × 1 = 384 400km ×
1km
= 384 400 000m
= 3.844 × 108 m
Using the equation for the circumference, C, of a circle in terms of its radius, we can
determine the distance travelled by the moon in one orbit:
C = 2πr
= 2π(3.844 × 108 m)
= 2.42 × 109 m.
Next we must convert the orbit time, T , into the correct units. Using the fact that
a day contains 24 hours, an hour consists of 60 minutes, and a minute is 60 seconds
long,
1day =
(24)(60)(60)seconds
(24)(60)(60)s
1 =
1day
(24)(60)(60)s
27.3days × 1 = 27.3days
1day
6
= 2.36 × 10 s
129
Therefore,
T = 2.36 × 106 s.
Combining the distance travelled by the moon in an orbit and the time taken by the
moon to complete one orbit, we can determine the magnitude of the moon’s velocity
or speed,
Distance
v =
time
C
=
T
= 1.02 × 103 m.s−1 .
Step 4 : Finally calculate the momentum and quote the answer

The magnitude of the moon’s momentum is:
p = mv
= (7.35 × 1022 kg)(1.02 × 103 m.s−1 )
= 7.50 × 1025 kg.m.s−1 .
7.2 The Momentum of a System

In Chapter ?? the concept of a system was introduced. The bodies that make up a system can
have different masses and can be moving with different velocities. In other words they can have
different momenta.
Definition: The total momentum of a system is the

sum of the momenta of each of the objects in the system.
Since momentum is a vector, the techniques of vector addition discussed in Chapter ?? must
be used to calculate the total momentum of a system. Let us consider an example.
Worked Example 35
Calculating the Total Momentum of a System
Question: Two billiard balls roll towards each other. They each have a mass of
0.3kg. Ball 1 is moving at v1 = 1 m.s−1 to the right, while ball 2 is moving at
v2 = 0.8 m.s−1 to the left. Calculate the total momentum of the system.
Answer:
• the mass of each ball,
• the velocity of ball 1, →
−
v1 , and
130
• the velocity of ball 2, →
−
v2 , Remember
all in the correct units! to check
What is being asked? We are asked to calculate the total momentum of the sys-
tem. In this example our system consists of two balls. To find the total momentum
we must sum the momenta of the balls,
→
−
p total = →
−
p1 + →
−
p2
Since ball 1 is moving to the right, its momentum is in this direction, while the second
ball’s momentum is directed towards the left.
System
m1 →
− →
− m2
p1 p2
Thus, we are required to find the sum of two vectors acting along the same straight
line. The algebraic method of vector addition introduced in Chapter ?? can thus be
used.
Let us choose right as the positive direction, then obviously left is negative.
Step 4 : Calculate the momentum
The total momentum of the system is then the sum of the two momenta taking the
directions of the velocities into account. Ball 1 is travelling at 1 m.s−1 to the right
or +1 m.s−1 . Ball 2 is travelling at 0.8 m.s−1 to the lef t or −0.8 m.s−1 . Thus,
Right is the positive direction
→
−
p total = m1 →
−
v1 + m 2 →
−
v2
= (0.3kg)(+1 m.s−1 ) + (0.3kg)(−0.8 m.s−1 )
= (+0.3 kg.m.s−1 ) + (−0.24 kg.m.s−1 )
= +0.06 kg.m.s−1
= 0.06 kg.m.s−1 to the right
In the last step the direction was added in words. Since the result in the second last
line is positive, the total momentum of the system is in the positive direction (i.e. to
the right).
7.3 Change in Momentum

If either an object’s mass or velocity changes then its momentum too will change. If an object
has an initial velocity →
−
u and a final velocity →
−
v , then its change in momentum, ∆→
−
p , is
131
∆→
−
p =→
−
p f inal − →
−
p initial = m→
−
v − m→
−
u
Worked Example 36
Change in Momemtum
Question: A rubber ball of mass 0.8kg is dropped and strikes the floor at a velocity
of 6 m.s−1 . It bounces back with an initial velocity of 4 m.s−1 . Calculate the change
in momentum of the rubber ball caused by the floor.
Answer:
• the ball’s mass,
• the ball’s initial velocity, and
• the ball’s final velocity Remember
all in the correct units. to check
Do not be confused by the question referring to the ball bouncing back with an “initial the units!
velocity of 4 m.s−1 ”. The word “initial” is included here since the ball will obviously
slow down with time and 4 m.s−1 is the speed immediately after bouncing from the
floor.
What is being asked? We are asked to calculate the change in momentum of the ball,
∆→
−
p = m→
−
v − m→
−
u.
We have everything we need to find ∆→ −

p . Since the initial momentum is directed
downwards and the final momentum is in the upward direction, we can use the alge-
braic method of subtraction discussed in the vectors chapter.
Let us choose down as the positive direction. Then substituting,
Down is the positive direction

Step 4 : Do the calculation and quote the answer
∆→
−
p = m→−v − m→−
u
= (0.8kg)(−4 m.s−1 ) − (0.8kg)(+6 m.s−1 )
= (0.8kg)(−10 m.s−1 )
= −8 kg.m.s−1
= 8 kg.m.s−1 up
where we remembered in the last step to include the direction of the change in
momentum in words.
132
→
−
u1 →
−
u2
m1 m2
Figure 7.1: Before the collision.
7.4 What properties does momentum have?

You may at this stage be wondering why there is a need for introducing momentum. Remarkably
momentum is a conserved quantity. Within an isolated system the total momentum is constant.
No matter what happens to the individual bodies within an isolated system, the total momentum
of the system never changes! Since momentum is a vector, its conservation implies that both its Momentum is
magnitude and its direction remains the same. conserved in
This Principle of Conservation of Linear Momentum is one of the most fundamental isolated system
principles of physics and it alone justifies the definition of momentum. Since momentum is related
to the motion of objects, we can use its conservation to make predictions about what happens
in collisions and explosions. If we bang two objects together, by conservation of momentum, the
total momentum of the objects before the collision is equal to their total momentum after the
collision.
Principle of Conservation of Linear Momentum:

The total linear momentum of an isolated system is constant.
or
In an isolated system the total momentum before a collision
(or explosion) is equal to the total momentum after the
collision (or explosion).
Let us consider a simple collision of two pool or billiard balls. Consider the first ball (mass
m1 ) to have an initial velocity (−
→). The second ball (mass m ) moves towards the first ball with
u 1 2
−
→
an initial velocity u2 . This situation is shown in Figure 7.1. If we add the momenta of each ball
we get a total momentum for the system. This total momentum is then
→+m −
p total bef ore = m1 −
→
− u →
1 2 u2 ,
After the two balls collide and move away they each have a different momentum. If we call
the final velocity of ball 1 →
−
v1 and the final velocity of ball 2 →
−
v2 (see Figure 7.2), then the total
momentum of the system after the collision is
v1 + m 2 →
p total af ter = m1 →
→
− − −
v2 ,
This system of two balls is isolated since there are no external forces acting on the balls.
Therefore, by the principle of conservation of linear momentum, the total momentum before
the collision is equal to the total momentum after the collision. This gives the equation for the
conservation of momentum in a collision of two objects,
133
→
−
v1 →
−
v2
m1 m2
Figure 7.2: After the collision.
→
−
p total bef ore = →
−
p total af ter
m1 −
→+m −
u 1
→ →
− →
−
2 u 2 = m 1 v1 + m 2 v2
m1 : mass of object 1 (kg)

m2 : mass of object 2 (kg)
−
→
u : initial velocity of object 1 (m.s−1 + direction)
1
−
→
u2 : initial velocity of object 2 (m.s−1 + direction)
→
−
v1 : final velocity of object 1 (m.s−1 + direction)
→
−
v2 : final velocity of object 2 (m.s−1 + direction)
Momentum is
always conserve
This equation is always true- momentum is always conserved in collisions.
in
The chapter ‘Collisions and Explosions’ (Chapter ??) deals with applications of momentum
collisions!
conservation.
7.5 Impulse
At the beginning of this chapter it was mentioned that momentum is closely related to force.
We will now explain the nature of this connection.
Consider an object of mass m moving with constant acceleration → −a . During a time ∆t the
→
− →
−
object’s velocity changes from an initial velocity u to a final velocity v (refer to Figure 7.3). We
→
−
know from Newton’s First Law that there must be a resultant force F Res acting on the object.
Starting from Newton’s Second Law,
→
−
F Res = m→−
a
→
−v −→ −u →
−
v −→ −
u
= m( ) since →
−
a =
∆t ∆t
m→−
v − m→ −u
=
∆t
→
−
p f inal − →
−p initial
=
∆t
∆→−
p
=
∆t
This alternative form of Newton’s Second Law is called the Law of Momentum.
134
→
− →
− t=0
F Res u
m
→
− t = ∆t
F Res m →
−
v
Figure 7.3: An object under the action of a resultant force.
Law of Momentum: The applied resultant force acting

on an object is equal to the rate of change
of the object’s momentum and this force
is in the direction of the change in momentum.
Mathematically,
→
− ∆→
−
p
F Res = ∆t
→
−
F Res : resultant force (N + direction)
∆→−
p : change in momentum (kg.m.s−1 + direction)
→
−
∆t : time over which F Res acts (s)
Rearranging the Law of Momentum,

→
−
F Res ∆t = ∆→
−
p.
→
−
The product F Res ∆t is called impulse,
→
−
Impulse ≡ F Res ∆t = ∆→
−
p
→
−
From this equation we see, that for a given change in momentum, F Res ∆t is fixed. Thus,
if FRes is reduced, ∆t must be increased (i.e. the resultant force must be applied for longer).
Alternatively if ∆t is reduced (i.e. the resultant force is applied for a shorter period) then the
resultant force must be increased to bring about the same change in momentum.
Worked Example 37
Impulse and Change in momentum
135
Question: A 150 N resultant force acts on a 300 kg object. Calculate how long
it takes this force to change the object’s velocity from 2 m.s−1 to the right to
6 m.s−1 to the right.
Answer:
• the object’s mass,
• the object’s initial velocity,
• the object’s final velocity, and
• the resultant force acting on the object Remember
all in the correct units! to check
What is being asked? We are asked to calculate the time taken ∆t to accelerate the
object from the given initial velocity to final velocity. From the Law of Momentum,
→
−
F Res ∆t = ∆→
−p
= m v − m→
→
− −
u
→
− →
−
= m( v − u ).
Thus we have everything we need to find ∆t!

Although not explicitly stated, the resultant force acts to the right. This follows from
the fact that the object’s velocity increases in this direction. Let us then choose right
as the positive direction.
Step 4 : Do the calculation and quote the final answer

Right is the positive direction
→
−
F Res ∆t = m(→
−
v −→
−
u)
m m
(+150N )∆t = (300kg)((+6
) − (+2 ))
s s
m
(+150N )∆t = (300kg)(+4 )
s
(300kg)(+4 m
s )
∆t =
+150N
∆t = 8s
Worked Example 38
Calculating Impulse
Question: A cricket ball weighing 156g is moving at 54 km.hr −1 towards a batsman.

It is hit by the batsman back towards the bowler at 36 km.hr −1 . Calculate i) the
136
ball’s impulse, and ii) the average force exerted by the bat if the ball is in contact
with the bat for 0.13s.
Answer:
• the ball’s mass,
• the ball’s initial velocity,
• the ball’s final velocity, and
• the time of contact between bat and ball Remember
all except the time in the wrong units! to check
Answer to (i): the units!
What is being asked? We are asked to calculate the impulse
→
−
Impulse = ∆→
−
p = F Res ∆t.
→
−
Since we do not have the force exerted by the bat on the ball ( F Res ), we have to
calculate the impulse from the change in momentum of the ball. Now, since
∆→
−
p = →
−
p f inal − →
−
p initial
= →
−
mv −mu, →
−
we need the ball’s mass, initial velocity and final velocity, which we are given.
Step 3 : Convert to S.I. units
Firstly let us change units for the mass
1000g = 1kg
1kg
1 =
1000g
1kg
156g × 1 = 156g ×
1000g
= 0.156kg
Next we change units for the velocity
1km = 1000m
1000m
1 =
1km
3600s = 1hr
1hr
1 =
3600s
km km 1000m 1hr
54 ×1×1 = 54 × ×
hr hr 1km 3600s
m
= 15
s
137
km km 1000m 1hr
36 ×1×1 = 36 × ×
hr hr 1km 3600s
m
= 10
s
Step 4 : Choose your convention
Next we must choose a positive direction. Let us choose the direction from the
batsman to the bowler as the postive direction. Then the initial velocity of the ball
is →
−
u = −15 m.s−1 , while the final velocity of the ball is −
→
v = +10 m.s−1
Step 5 : Calculate the momentum
Now we calculate the change in momentum,
Direction from batsman to bowler is the positive direction
∆→
−
p = →
−
p f inal − →
−
p initial
= →
−
mv −mu →
−
= m(→−v −→ −u)
= (0.156kg)((+10 m.s−1 ) − (−15 m.s−1 ))
= +3.9 kg.m.s−1
= 3.9 kg.m.s−1 in the direction from batsman to bowler
where we remembered in the last step to include the direction of the change in
momentum in words.
Step 6 : Determine the impulse
Finally since impulse is just the change in momentum of the ball,
Impulse = ∆→−p
= 3.9 kg.m.s−1 in the direction from batsman to bowler
Answer to (ii):
Step 7 : Determine what is being asked
What is being asked? We are asked to calculate the average force exerted by the bat
→
−
on the ball, F Res . Now,
→
−
Impulse = F Res ∆t = ∆→
−
p.
We are given ∆t and we have calculated the change in momentum or impulse of the
ball in part (i)!
Step 8 : Choose a convention
Next we choose a positive direction. Let us choose the direction from the batsman
to the bowler as the postive direction.
Step 9 : Calculate the force
Then substituting,
Direction from batsman to bowler is the positive direction
138
→
−
F Res ∆t = Impulse
→
− kg.m
F Res (0.13s) = +3.9
s
kg.m
→
− +3.9 s
F Res =
0.13s
kg.m
= +30 2
s
= 30N in the direction from batsman to bowler
where we remembered in the final step to include the direction of the force in words.

cepts
Units
Momentum →
−p - kg.m.s−1 X
Mass m - kg —
Velocity →
−
u ,→
−v - m.s−1 X
Change in momentum ∆p→
− - kg.m.s−1 X
→
−
Force F N kg.m.s−2 X
Impulse J - kg.m.s−1 X
Table 7.1: Summary of the symbols and units of the quantities used in Momentum
Momentum The momentum of an object is defined as its mass multiplied by its velocity.
Momentum of a System The total momentum of a system is the sum of the momenta of each
of the objects in the system.
Principle of Conservation of Linear Momentum: ‘The total linear momentum of an iso-

lated system is constant’ or ‘In an isolated system the total momentum before a collision
(or explosion) is equal to the total momentum after the collision (or explosion)’.
Law of Momentum: The applied resultant force acting on an object is equal to the rate of
change of the object’s momentum and this force is in the direction of the change in mo-
mentum.
139
Chapter 8
Work and Energy
8.1 What are Work and Energy?

During this chapter you will discover that work and energy are very closely related: We consider
the energy of an object as its capacity to do work and doing work as the process of transferring
energy from one object or form to another. In other words,
• an object with lots of energy can do lots of work.

• when work is done, energy is lost by the object doing work and gained by the object on
which the work is done.
Lifting objects or throwing them requires that you do work on them. Even making electricity
flow requires that something do work. Something must have energy and transfer it through doing
work to make things happen.
8.2 Work
To do work on an object, one must move the object by applying a force with at least a component
in the direction of motion. The work done is given by
W = Fk s
W : work done (N.m or J)

Fk : component of applied force parallel to motion (N )
s : displacement of the object (m)
It is very important to note that for work to be done there must be a component of the ap-
plied force in the direction of motion. Forces perpendicular to the direction of motion do no work.
As with all physical quantities, work must have units. As follows from the definition, work is
measured in N.m. The name given to this combination of S.I. units is the joule (J).
Definition: 1 joule is the work done when an object is moved 1m under

the application of a force of 1N in the direction of motion.
140
The work done by an object can be positive or negative. Since force (Fk ) and displacement
(s) are both vectors, the result of the above equation depends on their directions:
• If Fk acts in the same direction as the motion then positive work is being done. In this
case the object on which the force is applied gains energy.
• If the direction of motion and Fk are opposite, then negative work is being done. This
means that energy is transferred in the opposite direction. For example, if you try to push
a car uphill by applying a force up the slope and instead the car rolls down the hill you
are doing negative work on the car. Alternatively, the car is doing positive work on you!
Worked Example 39
Calculating Work Done I
Question: If you push a box 20m forward by applying a force of 15N in the forward
direction, what is the work you have done on the box?
Answer:
Step 1 : Analyse the question to determine what information is provided
• The force applied is F = 15N .
• The distance moved is s = 20m.
• The applied force and distance moved are in the same direction. Therefore,
Fk = 15N .
These quantities are all in the correct units, so no unit conversions are required.
Step 2 : Analyse the question to determine what is being asked

• We are asked to find the work done on the box. We know from the definition
that work done is W = Fk s
Step 3 : Next we substitute the values and calculate the work done
W = Fk s
= (15N )(20m)
= 300 N · m
= 300 J
Remember that the answer must be positive as the applied force and the motion are
in the same direction (forwards). In this case, you (the pusher) lose energy, while the
box gains energy.
141
Worked Example 40
Calculating Work Done II
Question: What is the work done by you on a car, if you try to push the car up a
hill by applying a force of 40N directed up the slope, but it slides downhill 30cm?
Answer:
• The force applied is F = 40N
• The distance moved is s = 30cm. This is expressed in the wrong units so we
must convert to the proper S.I. units (meters):
1m
s = 30cm = 30cm · = 0.3m
100cm
• The applied force and distance moved are in opposite directions. Therefore, if
we take s = 0.3m, then Fk = −40N .
• We are asked to find the work done on the car by you. We know that work done
is W = Fk s
Step 3 : Substitute the values and calculate the work done
Again we have the applied force and the distance moved so we can proceed with
calculating the work done:
W = Fk s
= (−40N )(0.3m)
= −12N · m
= −12 J
Note that the answer must be negative as the applied force and the motion are in
opposite directions. In this case the car does work on the person trying to push.
What happens when the applied force and the motion are not parallel? If there is an angle
between the direction of motion and the applied force then to determine the work done we have
to calculate the component of the applied force parallel to the direction of motion. Note that this
means a force perpendicular to the direction of motion can do no work.
Worked Example 41
Calculating Work Done III
Question: Calculate the work done on a box, if it is pulled 5m along the ground by
applying a force of F = 10N at an angle of 60o to the horizontal.
142
F
60o
Answer:
• The force applied is F = 10N
• The distance moved is s = 5m along the ground
• The angle between the applied force and the motion is 60o
These quantities are in the correct units so we do not need to perform any unit con-
versions.

• We are asked to find the work done on the box.
Step 3 : Calculate the component of the applied force in the direction of motion
Since the force and the motion are not in the same direction, we must first calculate
the component of the force in the direction of the motion.
F
Fk
60o
F||
From the force diagram we see that the component of the applied force parallel to
the ground is
F|| = F · cos(60o )
= 10N · cos(60o )
= 5N
Step 4 : Substitute and calculate the work done

Now we can calculate the work done on the box:
W = Fk s
= (5N )(5m)
= 25 J
Note that the answer is positive as the component of the force Fk is in the same
direction as the motion.
We will now discuss energy in greater detail.
143
8.3 Energy
As we mentioned earlier, energy is the capacity to do work. When positive work is done on
an object, the system doing the work loses energy. In fact, the energy lost by a system is
exactly equal to the work done by the system.
Like work (W ) the unit of energy (E) is the joule (J). This follows as work is just the transfer
of energy.
A very important property of our universe which was discovered around 1890 is that energy
is conserved.
Energy is never created nor destroyed, but merely

transformed from one form to another.
Energy is
Energy conservation and the conservation of matter are the principles on which classical me- conserved!
chanics is built.
IN THE ABSENCE OF FRICTION
When work is done on an object by a system:
-the object gains energy equal to the work done by the system
Work Done = Energy Transferred
IN THE PRESENCE OF FRICTION
When work is done by a system:
-only some of the energy lost by the system is

transferred into useful energy
-the rest of the energy transferred is lost to friction
Total Work Done = Useful Work Done + Work Done Against Friction
8.3.1 Types of Energy

So what different types of energy exist? Kinetic, mechanical, thermal, chemical, electrical, radi-
ant, and atomic energy are just some of the types that exist. By the principle of conservation
of energy, when work is done energy is merely transferred from one object to another and from
one type of energy to another.
144
Kinetic Energy
Kinetic energy is the energy of motion that an object has. Objects moving in straight lines
possess translational kinetic energy, which we often abbreviate as E k .
The translational kinetic energy of an object is given by
Ek = 12 mv 2
Ek : kinetic energy (J)

m : mass of object (kg)
v : speed of the object (m.s−1 )
Note the dependence of the kinetic energy on the speed of the object– kinetic energy is related
to motion. The faster an object is moving the greater its kinetic energy.
Worked Example 42
Calculation of Kinetic Energy
Question: If a rock has a mass of 1kg and is thrown at 5m/s, what is its kinetic
energy?
Answer:
• The mass of the rock m = 1kg
• The speed of the rock v = 5m/s
These are both in the correct units so we do not have to worry about unit conversions.

• We are asked to find the kinetic energy. From the definition we know that to
work out Ek , we need to know the mass and the velocity of the object and we
are given both of these values.
Step 3 : Substitute and calculate the kinetic energy
1
Ek = mv 2
2
1 m
= (1kg)(5 )2
2 s
kg · m2
= 12.5
s2
= 12.5 J
145
To check that the units in the above example are in fact correct:
µ ¶
kg · m2 kg · m
= ·m=N ·m
s2 s2
= J
The units are indeed correct!
Study hint: Checking units is an important cross-check and

you should get into a habit of doing this. If you, for example,
finish an exam early then checking the units in your calculations
is a very good idea.
Worked Example 43
Mixing Units and Kinetic Energy Calculations 1
Question: If a car has a mass of 900kg and is driving at 60km/hr, what is its kinetic
energy?
Answer:
• The mass of the car m = 900kg
• The speed of the car v = 60km/hr. These are not the units we want so before
we continue we must convert to m/s. We do this by multiplying by one:
km km 1000m
60 ×1 = 60 ×
hr hr 1km
m
= 60000
hr
Now we need to change from hours to seconds so we repeat our procedure:
m m 1hr
60000 ×1 = 60000 ×
hr hr 3600s
m
= 16.67
s
and so the speed in the units we want is v = 16.67m/s.
• We are asked to find the kinetic energy.
Step 3 : Substitute and calculate
146
We know we need the mass and the speed to work out Ek and we are given both of
these quantities. We thus simply substitute them into the equation for E k :
1
Ek = mv 2
2
1 m
= (900kg)(16.67 )2
2 s
2
kgm
= 125 000 2
s
= 125 000 J
Worked Example 44
Mixing Units and Kinetic Energy Calculations 2
Question: If a bullet has a mass of 150g and is shot at a muzzle velocity of 960m/s,
what is its kinetic energy?
Answer:
• We are given the mass of the bullet m = 150g. This is not the unit we want
mass to be in. We need to convert to kg. Again, we multiply by one:
1kg
150g · 1 = 150g ·
1000g
= 0.15kg
• We are given the muzzle velocity which is just how fast the bullet leaves the
barrel and it is v = 960m/s.
• We are asked to find the kinetic energy.
We just substitute the mass and velocity (which are known) into the equation for E k :
1
Ek = mv 2
2
1 m
= (150kg)(960 )2
2 s
kgm2
= 69 120 2
s
= 69 120 J
147
Potential Energy
If you lift an object you have to do work on it. This means that energy is transferred to
the object. But where is this energy? This energy is stored in the object and is called potential
energy. The reason it is called potential energy is because if we let go of the object it would move.
Definition: Potential energy is the energy an object has due to its

position or state.
As an object raised above the ground falls, its potential energy is released and transformed
into kinetic energy. The further it falls the faster it moves as more of the stored potential energy
is transferred into kinetic energy. Remember, energy is never created nor destroyed, but merely
transformed from one type to another. In this case potential energy is lost but an equal amount
of kinetic energy is gained.
In the example of a falling mass the potential energy is known as gravitational potential energy
as it is the gravitational force exerted by the earth which causes the mass to accelerate towards
the ground. The gravitational field of the earth is what does the work in this case.
Another example is a rubber-band. In order to stretch a rubber-band we have to do work

on it. This means we transfer energy to the rubber-band and it gains potential energy. This
potential energy is called elastic potential energy. Once released, the rubber-band begins to move
and elastic potential energy is transferred into kinetic energy.
Gravitational Potential Energy

As we have mentioned, when lifting an object it gains gravitational potential energy. One is free
to define any level as corresponding to zero gravitational potential energy. Objects above this
level then possess positive potential energy, while those below it have negative potential energy.
To avoid negative numbers in a problem, always choose the lowest level as the zero potential
mark. The change in gravitational potential energy of an object is given by:
∆EP = mg∆h
∆EP : Change in gravitational potential energy (J)

m : mass of object (kg)
g : acceleration due to gravity (m.s−2 )
∆h : change in height (m)
When an object is lifted it gains gravitational potential energy, while it loses gravitational
potential energy as it falls.
Worked Example 45
Gravitational potential energy
148
Question: How much potential energy does a brick with a mass of 1kg gain if it is
lifted 4m.
Answer:
• The mass of the brick is m = 1kg
• The height lifted is ∆h = 4m
These are in the correct units so we do not have to worry about unit conversions.
• We are asked to find the gain in potential energy of the object.
Step 3 : Identify the type of potential energy involved
Since the block is being lifted we are dealing with gravitational potential energy. To
work out ∆EP , we need to know the mass of the object and the height lifted. As
both of these are given, we just substitute them into the equation for ∆E P .
∆EP = mg∆h
³ m´
= (1kg) 10 2 (4m)
s
kg · m2
= 40
s2
= 40 J
8.4 Mechanical Energy and Energy Conservation

Kinetic energy and potential energy are together referred to as mechanical energy.
The total mechanical energy (U ) of an object is then the sum of its kinetic and potential energies:
U = E P + EK
1
U = mgh + mv 2 (8.1)
2
Now,
IN THE ABSENCE OF FRICTION
Mechanical energy is conserved
Ubef ore = Uaf ter
This principle of conservation of mechanical energy can be a very powerful tool for solving
physics problems. However, in the presence of friction some of the mechanical energy is lost:
149
IN THE PRESENCE OF FRICTION
Mechanical energy is not conserved

(The mechanical energy lost is equal
to the work done against friction)
∆U = Ubef ore − Uaf ter = Work Done Against Friction
Worked Example 46
Using Mechanical Energy Conservation
Question: A 2kg metal ball is suspended from a rope. If it is released from point A
and swings down to the point B (the bottom of its arc) what is its velocity at point
B?
A
0.5m
Answer:
• The mass of the metal ball is m = 2kg
• The change in height going from point A to point B is h = 0.5m
• The ball is released from point A so the velocity at point A is zero (vA = 0m/s).
These are in the correct units so we do not have to worry about unit conversions.

• Find the velocity of the metal ball at point B.
Step 3 : Determine the Mechanical Energy at A and B
To solve this problem we use conservation of mechanical energy as there is no friction.
Since mechanical energy is conserved,
UA = U B
Therefore we need to know the mechanical energy of the ball at point A (U A ) and at
point B (UB ). The mechanical energy at point A is
1
UA = mghA + m(vA )2
2
150
We already know m, g and vA , but what is hA ? Note that if we let hB = 0 then
hA = 0.5m as A is 0.5m above B. In problems you are always free to choose a line
corresponding to h = 0. In this example the most obvious choice is to make point B
correspond to h = 0.
Now we have,
³ m´ 1
UA = (2kg) 10 2 (0.5m) + (2kg)(0)2
s 2
= 10 J
As already stated UB = UA . Therefore UB = 10J, but using the definition of

mechanical energy
1
UB = mghB + m(vB )2
2
1 2
= m(vB )
2
because hB = 0. This means that
1
10J = (2kg)(vB )2
2
J
(vB )2 = 10
kg
√ m
vB = 10
s

cepts
Units
Work W J N.m or kg.m2 .s−2 —
Kinetic Energy EK J N.m or kg.m2 .s−2 —
Potential Energy EP J N.m or kg.m2 .s−2 —
Mechanical Energy U J N.m or kg.m2 .s−2 —
Table 8.1: Summary of the symbols and units of the quantities used in Energy
Principle of Conservation of Energy: Energy is never created nor destroyed, but merely
transformed from one form to another.
Conservation of Mechanical Energy: In the absence of friction, the total mechanical energy
of an object is conserved.
151
Essay 1 : Energy
Author: Asogan Moodaly
Asogan Moodaly received his Bachelor of Science degree (with honours) in Mechanical Engineering
from the University of Natal, Durban in South Africa. For his final year design project he worked on
a 3-axis filament winding machine for composite (Glass re-enforced plastic in this case) piping. He
worked in Vereeniging, Gauteng at Mine Support Products (a subsidiary of Dorbyl Heavy Engineering)
as the design engineer once he graduated. He currently lives in the Vaal Triangle area and is working
for Sasol Technology Engineering as a mechanical engineer, ensuring the safety and integrity of
equipment installed during projects.
Energy and electricity. Why the fuss?

Disclaimer: The details furnished below are very basic and for illustration purposes only.
Why do we need energy? Note that I use the word energy and not electricity. On a broad scale
it stimulates economic growth, etc, etc but on a personal level it allows us to lead a comfortable
lifestyle.
e.g. Flick a switch and Heat for cooking Entertainment such as television and radio Heat
for water and interior of house Ironing Electronic and electrical devices such as alarms, garage
doors, etc.
In a modern household this energy is provided in the form of electricity which is powered via
fossil fuels or nuclear.
How is electricity made? In a nutshell: By moving a magnet through or near a set of
conducting coils.
Linear Rotational
Conducting wire typically copper
Magnet
Magnet
Light bulb
Iron core in
coil increases
electricity
Most power stations produce steam through heat (nuclear reaction or burning fossil fuels),
the steam drives a turbine which moves a magnet relative to a coil (the generator like the above
but on a much larger scale i.e. bigger magnets, bigger coils, etc), which produces electricity that
is transmitted via a power network to our homes. Gas fired plants burn gas directly in a gas
turbine to produce the same desired relative motion between permanent magnet and coil.
152
Steam rushes through
Turbine, causing the
blades to spin (attached to Generator
the shaft so shaft spins)
Boiler Shaft
Magnet attached
to shaft
Steam
Water
Turbine blades Coils

Heat
Electricity transmitted
through power cable
Coal
Power Station
Pylons support
cables transformers houses
transmission cables
Coal, oil and gas are fossil fuels. Fossil fuels were created by decomposing organic (plant and
animal) matter a long, long time ago and are typically found underground. Different tempera-
tures and pressures resulted in the organic matter transforming into coal, oil or gas.
Why the fuss about fossil fuels?
1. Fossil fuel power is bad news in the long run. It pollutes and contributes to the greenhouse
effect (global warming resulting in melting polar ice caps, floods, droughts, disease, etc).
2. Its not going to last forever.
3. Nuclear power is cleaner in terms of emissions but theres no proven way of disposing of the
nuclear waste. Oh, and it wont last forever either!
Renewable Energy As the name suggests renewable energy lasts forever. Solar (sun), wind,
geothermal, wave, hydro and biomass (organic) are all sources of energy that will last until the
sun eventually explodes many millions of years from now. Hopefully the human race will have
moved from the earth by then! Generally the principal of renewable electricity generation is
similar to fossil fuel electricity generation in that electricity is generated by moving a magnet
relative to a conducting coil. What is different is the way energy is supplied to cause that motion.
The below are a few different types of available renewable energy technologies.
Solar
There are different types of solar electricity technologies, the main ones being solar thermal and
photovoltaic.
153
Sun
Transmission
Heated oil stored cables &
in insulated tank pylon
for night use
Mirrored trough Steam Steam Generator
reflector, reflects pipes Turbine
sunlight onto black
pipes
Water pipes
Heat exchanger transfers
Black pipes carrying oil heat from hot oil to water
Water becomes steam
Solar thermal uses the heat of the sun to produce electricity. Sun is concentrated using
mirrors. This heat either creates steam which drives a turbine which in turn drives a generator
(as per fossil fuel generation), or drives an air engine (engine that uses expanding air to obtain
motion) that drives a generator.
Photovoltaic panels convert sunlight directly into electricity. The benefit of photovoltaic
panels is that there are no moving parts, and is therefore relatively maintenance free. The
downside is that its very expensive at this stage (17/06/2004).
Solar Water Heaters could save up to 30% of the total electricity used in a house.
Heater on roof
Hot
Water
out Cold
Insulated geyser water
to store water in
Water (in copper

pipes painted
Wooden box with glass top black) is heated
provides insulation. Silicon by sunlight. Cold
gel should be used to make the water sinks. Hot
box airtight. If air escapes, so water rises into
does heat. the geyser.
Wind
Wind turbines catch wind that spins the blades. The blades are connected to a shaft that spins
because of the wind. This spinning shaft spins another shaft that turns a permanent magnet
relative to conducting coils.
Note that gears are used to convert the slow spinning of the 1st shaft to a faster spin on the
2nd shaft. The generator shaft needs to spin at the correct speed to produce the right amount
and quality of electricity. Some generators are now being modified to run at slower speeds. This
saves money as gears are not needed.
154
‘Nacelle’ -Vessel
containing all
Detail of Nacelle Vessel (top view)
moving parts
Blades
Shaft 1 (slow spin)
to blades
Shaft 2 (Fast spin)
Gears Generator
Biomass
Biomass is anything organic i.e. plant or animal matter. It can be used in the place of coal as
per a normal coal fired plant and is renewable as long as the biomass e.g. wood; is handled in a
sustainable manner. By sustainable I mean that suitable farming practices are used so that the
land is not over farmed which will result in the soil becoming barren and nothing growing there
again.
Pipe carrying biogas for heat or power

Processed biomass -
fertilizer Upside down
floating
Biogas container to Input biomass
bubbles catch biogas
Water forms a Input biomass being digested

seal to keep
air out
Biomass can also be processed using anaerobic digestion to produce a gas that can be burned
for heat or electricity. This biogas is made up of a number of other gases that are similar to
those found in fossil fuel natural gas Except the amount of the gases are different. E.g. Natural
gas has about 94
Anaerobic digestion: Anaerobic means No air. Therefore anaerobic digestion means to digest
in the absence of air. Bacteria that naturally exist in organic matter will convert organic matter
to biogas and fertilizer when all the air is removed.
Thousands of anaerobic digesters have been installed in rural India, Nepal and China in rural
areas where cow dung, human waste and chicken litter (faeces) are all processed using anaerobic
digestion to produce gas that can be burned in the home for cooking and heating. The leftover
is used as fertilizer.
Geothermal Energy
In some places on earth, the earths crust is thinner than others. As a result the heat from the
earths core escapes. The heat can be captured by converting water to steam, and using the
155
steam to drive a steam generator as discussed above.
Hydroelectric power Water from a river is diverted to turn a water turbine to create electricity
similar to the principles of steam generation. The water is returned to the river after driving the
turbine.
Pipe diverting
water
River
Transmission Generator house
cables
Wave Energy
Some wave energy generators work similarly to wind turbines except that underwater ocean
currents turns the blades instead of wind; and of course most of the structure is under water!
Ocean current blades
Underwater pipe to shore

Ocean floor carrying transmission cable
Another concept uses the rising and falling of the tides to suck air in using a one way valve.
As a result air becomes compressed in a chamber and the compressed air is let out to drive a
turbine which in turn drives a generator
Generator house with

One way valve allows air
turbine and generator
to be sucked in then shuts
when air tries to get out.
Chamber with
compressed air Cliff face
As the water level falls

and rises, air is sucked
Ocean floor in and compressed
156
These are relatively new technologies.
Liquid Fuels Liquid fuels are used mainly for transportation. Petrol and diesel are the most
common liquid fuels and are obtained from oil.
Sasol is the only company in the world that makes liquid fuels from coal; and will be one of the
leading companies in the world to make liquid fuels from natural gas! The Sasol petro-chemical
plants are based in Sasolburg on the border of the Free State and in Secunda in Mpumalanga.
However, as discussed above coal, gas and oil are fossil fuels and are not renewable. Petrol
and diesel are obtained from fossil fuels and therefore pollute and contribute to the green house
effect (global warming).
Alternatives
Biodiesel
Oil can be extracted from plants such as the soya bean, sunflower and rapeseed by pressing it
through a filter. This oil if mixed correctly with either methanol or dry ethanol and Sodium
Hydroxide will separate the plant oil into biodiesel, glycerol and fertilizer.
The biodiesel can be used as produced in a conventional diesel engine with little or no mod-
ifications required.
The glycerol can be refined a bit further for pharmaceutical companies to use, or can be used
to make soap.
Ethanol
Corn, maize and sugar cane can be used to make ethanol as a fuel substitute for petrol. Its made
by the same fermentation process used to make alcohol. Enzymes are often used to speed up the
process.
In ethanol from sugar cane production, the leftover bagasse (the fibre part of the sugar cane)
can be burned in a biomass power station to produce electricity.
Hydrogen
Through the process of electrolysis electricity (hopefully clean, renewable electricity!) can split
water into hydrogen and oxygen. The stored hydrogen can be used in a fuel cell to create
electricity in a process that is opposite to electrolysis; to drive electric motors in a car.
The hydrogen can also be burned directly in a modified internal combustion engine.
In both cases the waste product is water.
157
Essay 2 : Tiny, Violent Collisions
Author: Thomas D. Gutierrez
Tom Gutierrez received his Bachelor of Science and Master degrees in physics from San Jose
State University in his home town of San Jose, California. As a Master’s student he helped work on a
laser spectrometer at NASA Ames Research Centre. The instrument measured the ratio of different
isotopes of carbon in CO2 gas and could be used for such diverse applications as medical diagnostics
and space exploration. Later, he received his Ph.D. in physics from the University of California, Davis
where he performed calculations for various reactions in high energy physics collisions. He currently
lives in Berkeley, California where he studies proton-proton collisions seen at the STAR experiment
at Brookhaven National Laboratory on Long Island, New York.
High Energy Collisions

Take an orange and expanded it to the size of the earth. The atoms of the earth-sized orange
would themselves be about the size of regular oranges and would fill the entire “earth-orange”.
Now, take an atom and expand it to the size of a football field. The nucleus of that atom would
be about the size of a tiny seed in the middle of the field. From this analogy, you can see that
atomic nuclei are very small objects by human standards. They are roughly 10 −15 meters in
diameter – one-hundred thousand times smaller than a typical atom. These nuclei cannot be
seen or studied via any conventional means such as the naked eye or microscopes. So how do
scientists study the structure of very small objects like atomic nuclei?
The simplest nucleus, that of hydrogen, is called the proton. Faced with the inability to
isolate a single proton, open it up, and directly examine what is inside, scientists must resort to
a brute-force and somewhat indirect means of exploration: high energy collisions. By colliding
protons with other particles (such as other protons or electrons) at very high energies, one hopes
to learn about what they are made of and how they work. The American physicist Richard
Feynman once compared this process to slamming delecate watches together and figuring out
how they work by only examining the broken debris. While this analogy may seem pessimistic,
with sufficent mathematical models and experimental precision, considerable information can be
extracted from the debris of such high energy subatomic collisions. One can learn about both
the nature of the forces at work and also about the sub-structure of such systems.
The experiments are in the category of “high energy physics” (also known as “subatomic”
physics). The primary tool of scientific exploration in these experiments is an extremely violent
collision between two very, very small subatomic objects such as nuclei. As a general rule, the
higher the energy of the collisions, the more detail of the original system you are able to resolve.
These experiments are operated at laboratories such as CERN, SLAC, BNL, and Fermilab, just
to name a few. The giant machines that perform the collisions are roughly the size of towns.
For example, the RHIC collider at BNL is a ring about 1 km in diameter and can be seen from
space. The newest machine currently being built, the LHC at CERN, is a ring 9 km in diameter!
Let’s examine the kinematics of such a collisions in some detail...
158
Chapter 9
Collisions and Explosions
In most physics courses questions about collisions and explosions occur and to solve these we
must use the ideas of momentum and energy; with a bit of mathematics of course! This section
allows you to pull the momentum and energy ideas together easily with some specific problems.
9.1 Types of Collisions

We will consider two types of collisions in this section
• Elastic collisions
• Inelastic collisions
In both types of collision, total energy and total momentum is always conserved. Kinetic energy
is conserved for elastic collisions, but not for inelastic collisions.
9.1.1 Elastic Collisions

Definition: An elastic collision is a collision where total momentum
and total kinetic energy are both conserved.
(NOTE TO SELF: this should be in an environment for definitions!!)
This means that the total momentum and the total kinetic energy before an elastic collision is
the same as after the collision. For these kinds of collisions, the kinetic energy is not changed
into another type of energy.
Before the Collision

In the following diagram, two balls are rolling toward each other, about to collide
→
−
p 1 , K1 →
−
p 2 , K2
159
Before the balls collide, the total momentum of the system is equal to all the individual momenta
added together. The ball on the left has a momentum which we call → −p 1 and the ball on the
→
−
right has a momentum which we call p 2 , it means the total momentum before the collision is
→
−
p Before = →
−
p1+→
−
p2 (9.1)
We calculate the total kinetic energy of the system in the same way. The ball on the left has a
kinetic energy which we call K1 and the ball on the right has a kinetic energy which we call K2 ,
it means that the total kinetic energy before the collision is
KBefore = K1 + K2 (9.2)
After the Collision

The following diagram shows the balls after they collide
→
−
p 3 , K3 →
−
p 4 , K4
After the balls collide and bounce off each other, they have new momenta and new kinetic
energies. Like before, the total momentum of the system is equal to all the individual momenta
added together. The ball on the left now has a momentum which we call → −p 3 and the ball on the
→
−
right now has a momentum which we call p 4 , it means the total momentum after the collision
is
→
−
p After = →
−
p3+→−p4 (9.3)
The ball on the left now has a kinetic energy which we call K3 and the ball on the right now has
a kinetic energy which we call K4 , it means that the total kinetic energy after the collision is
KAfter = K3 + K4 (9.4)
Since this is an elastic collision, the total momentum before the collision equals the total momen-
tum after the collision and the total kinetic energy before the collision equals the total kinetic
energy after the collision
Before After
→
−
p Before = →
−
p (9.5)
After
→
−
p1+→ −p2 = →
−
p3+→
−
p4
and
KBefore = KAfter (9.6)
K1 + K 2 = K3 + K4
Worked Example 47
An Elastic Collision
160
We will have a look at the collision between two pool balls. Ball 1 is at rest and ball
2 is moving towards it with a speed of 2 [m.s−1 ]. The mass of each ball is 0.3 [Kg].
After the balls collide elastically, ball 2 comes to a stop and ball 1 moves off. What
is the final velocity of ball 1?
Step 1 : Draw the “before” diagram
Before the collision, ball 2 is moving; we will call it’s momentum P2 and it’s kinetic
energy K2 . Ball 1 is at rest, so it has zero kinetic energy and momentum.
2 1
→
−
p 2 , K2 →
−
p 1 = 0, K1 = 0
Step 2 : Draw the “after” diagram

After the collision, ball 2 is at rest but ball 1 has a momentum which we call P 3 and
a kinetic energy which we call K3 .
2 1
→
−
p 4 = 0, K4 = 0 →
−
p 3 , K3
Because the collision is elastic, we can solve the problem using momentum conserva-
tion or kinetic energy conservation. We will do it both ways to show that the answer
is the same, whichever method you use.
Step 3 : Show the conservation of momentum
We start by writing down that the momentum before the collision → −p Before is equal
→
−
to the momentum after the collision p After
Before After (9.7)
−
→
p Before = →
−
p After
→
−
p1+→ −p2 = p3+→
→
− −p4
0+ p→
− →
−
= p +0
2 3
→
−
p2 = →
−
p3
We know that momentum is just P = mv, and we know the masses of the balls, so
we can rewrite the conservation of momentum in terms of the velocities of the balls
→
−p = → −
p (9.8)
2 3
m2 v 2 = m 3 v3
0.3v2 = 0.3v3
v2 = v3
So ball 1 exits with the velocity that ball 2 started with!
v3 = 2[m.s−1 ] (9.9)
161
Step 4 : Show the conservation of kinetic energy
We start by writing down that the kinetic energy before the collision KBefore is equal
to the kinetic energy after the collision KAfter
Before After (9.10)
KBefore = KAfter
K1 + K 2 = K3 + K4
0 + K2 = K3 + 0
K2 = K3
2
We know that kinetic energy is just K = mv 2 , and we know the masses of the balls,
so we can rewrite the conservation of kinetic energy in terms of the velocities of the
balls
K2 = K3 (9.11)
m2 v22 m3 v32
=
2 2
0.15v22 = 0.15v32
v22 = v32
v2 = v3
So ball 1 exits with the velocity that ball 2 started with, which agrees with the answer
we got when we used the conservation of momentum.
v3 = 2[m.s−1 ] (9.12)
Worked Example 48
Elastic Collision 2
Question: Now for a slightly more difficult example. We have 2 marbles. Marble 1
has mass 50 g and marble 2 has mass 100 g. I roll marble 2 along the ground towards
marble 1 in the positive x-direction. Marble 1 is initially at rest and marble 2 has
a velocity of 3 m.s−1 in the positive x-direction. After they collide elastically, both
marbles are moving. What is the final velocity of each marble?
Answer:
Step 1 : Put all the quantities into S.I. units
So:
m1 = 0.05kg and m2 = 0.1kg
Before the collision:
2 1
→
−
p2 , Ek2 →
−
p1 = 0, Ek1 = 0
162
After the collision:
2 1
→
−
p3 , Ek3 →
−
p4 , Ek4
Step 3 : Decide which equations to use in the problem

Since the collision is elastic, both momentum and kinetic energy are conserved in the
collision. So:
EkBef ore = EkAf ter
and
−−−−→ = −
pBef p− −−→
ore Af ter
There are two unknowns (→

−
v and →
−
v ) so we will need two equations to solve for them.
1 2
We need to use both kinetic energy conservation and momentum conservation
in this problem.
Step 4 : Solve the first equation
Let’s start with energy conservation. Then:
EkBef ore = EkAf ter
1 − →2 + 1 m − →2 1 → 1 →2
m1 −
v 1 + m2 −
2
m1 u 1 2 u2 = v2
2 2 2 2
m1 −→2 + m − →2 v1 + m 2 →
m1 →
− −
2 2
u 1 2 u2 = v2
But −
→=0, and solving for →
− 2
u 1 v2 :
→
−
v2
2
= →2 − m1 →
−
u −
v1
2
2
m2
→
− 2 (0.05) →− 2
v2 = (3)2 − v1
(0.10)
→
− 1− 2
9− →
2
v2 = v1 (A)
2
Step 5 : Solve the second equation

Now we have simplified as far as we can, we move onto momentum conservation:
−−−−→ = −
pBef p−−−→
ore Af ter
m −→+m −
u1 1 u→ = m → v +m →
−
2 2
−
v 1 1 2 2
But −
→=0, and solving for →
u 1
−
v1 :
m2 −
→ =
u 2 m1 →v1 + m 2 →
− −
v2
m1 →
−
v1 = −
→ →
−
m 2 u 2 − m 2 v2
→
− m2 −→ − m2 → −
v1 = u 2 v2
m1 m1
→
−
v1 = 2(3) − 2→ −
v2
→
−
v1 = 6 − 2v →
− (B)
2
163
Step 6 : Substitute one equation into the other
Now we can substitute (B) into (A) to solve for →
−
v2 :
→
− 1− 2
9− →
2
v2 = v1
2
→
− 1
9 − (6 − 2→ −
2
v2 = v2 ) 2
2
→
− 1
9 − (36 − 24→ −
v2 + 4 →
−
2 2
v2 = v2 )
2
→
−
v2
2
= 9 − 18 + 12→−
v2 − 2 →
−
v2
2
3→
− −9 + 12→ −
2
v2 = v2
→
−
v2
2
= →
−
4v − 3
2
→
− 2 →
−
v − 4v + 3 = 0
2 2
(→
−
v2 − 3)(→
−
v2 − 1) = 0
→
−
v2 = 3 or →
−
v2 = 1
We were lucky in this question because we could factorise. If you can’t factorise, then
you can always solve using the formula for solving quadratic equations. Remember:
√
−b ± b2 − 4ac
x=
2a
So, just to check:
p
→
− 4 ± 42 − 4(1)(3)
v2 =
2(1)
√
→
− 4 ± 16 − 12
v2 =
√2
→
− 4 ± 4
v2 =
2
→
−
v2 = 2 ± 1
→
−
v = 3 or → −
v = 1 same as before
2 2
Step 7 : Solve for and quote the final answers

So finally, substituting into equation (B) to get →
−
v1 :
→
−
v = 6 − 2v→
−
1 2
If →
−
v2 = 3 m.s−1 then
→
−
v1 = 6 − 2(3) = 0 m.s−1
But, according to the question, marble 1 is moving after the collision. So →
−
v1 =
6 0 and
→
−
v2 6= 3. Therefore:
→
−
v2 = 1 m.s−1 in the positive x − direction
and
→
−
v1 = 4 m.s−1 in the positive x − direction
164
9.1.2 Inelastic Collisions
Definition: An inelastic collision is a collision in which total momentum
is conserved but total kinetic energy is not conserved;
the kinetic energy is transformed into other kinds of energy.
So the total momentum before an inelastic collisions is the same as after the collision. But the
total kinetic energy before and after the inelastic collision is different. Of course this does not
mean that total energy has not been conserved, rather the energy has been transformed into
another type of energy.
As a rule of thumb, inelastic collisions happen when the colliding objects are distorted in
some way. Usually they change their shape. To modify the shape of an object requires energy
and this is where the “missing” kinetic energy goes. A classic example of an inelastic collision is
a car crash. The cars change shape and there is a noticeable change in the kinetic energy of the
cars before and after the collision. This energy was used to bend the metal and deform the cars.
Another example of an inelastic collision is shown in the following picture.
Here an asteroid (the small circle) is moving through space towards the moon (big circle).
Before the moon and the asteroid collide, the total momentum of the system is:
−−−−→ = −
pBef p→ →
−
ore m + pa
(−
p→ −−−→ →
− −−−−−→
m stands for pmoon and pa stands for pasteroid ) and the total kinetic energy of the system is:
EBef ore = Ekm + Eka
−
p→ →
−
m , Ekm pa , Eka
When the asteroid collides inelastically with the moon, its kinetic energy is transformed
mostly into heat energy. If this heat energy is large enough, it can cause the asteroid and the
area of the moon’s surface that it hit, to melt into liquid rock! From the force of impact of the
asteroid, the molten rock flows outwards to form a moon crater.
After the collision, the total momentum of the system will be the same as before. But since
this collision is inelastic, (and you can see that a change in the shape of objects has taken place!),
165
total kinetic energy is not the same as before the collision.
−
p−−−→
Af ter , EkAf ter
So:
−−−−→
pBef = −
p−−−→
ore Af ter
−
pm + →
→ −
pa = −
pAf−
−− →
ter
but
EkBef ore 6= EkAf ter
Ekm + Eka 6= EkAf ter
Worked Example 49
Inelastic Collision
Question: Let’s consider the collision of two cars. Car 1 is at rest and Car 2 is
moving at a speed of 2m.s−1 in the negative x-direction. Both cars each have a mass
of 500kg. The cars collide inelastically and stick together. What is the resulting
velocity of the resulting mass of metal?
Answer:
Car 1 Car 2
→
−
p1 = 0 →
−
p2
−
p−−−→
Af ter
166
We know the collision is inelastic and there was a definite change in shape of the
objects involved in the collision - there were two objects to start and after the collision
there was one big mass of metal! Therefore, we know that kinetic energy is not
conserved in the collision but total momentum is conserved. So:
EkBef ore 6= EkAf ter

but
−−−−−−→
p = −
p−−−→
T Bef ore Af ter
Step 3 : Solve for and quote the final velocity

So we must use conservation of momentum to solve this problem. Take the negative
x-direction to have a negative sign:
−−−−−−→
p = −
p−−−→
T Bef ore Af ter
→
−
p +→ −
p = −
p−−−→
1 2 Af ter
→+m −
m1 −
u 1
→
2 u2 = (m1 + m2 )→
−v
0 + 500(−2) = (500 + 500)→
−v
−1000 = 1000→
−
v
→
−
v = −1 m.s−1
Therefore,
→
−
v = 1 m.s−1 in the negative x − direction.
9.2 Explosions
When an object explodes, it breaks up into more than one piece and it therefore changes its shape.
Explosions occur when energy is transformed from one kind e.g. chemical potential energy to
another e.g. heat energy or kinetic energy extremely quickly. So, like in inelastic collisions, total
kinetic energy is not conserved in explosions. But total momentum is always conserved.
Thus if the momenta of some of the parts of the exploding object are measured, we can use
momentum conservation to solve the problem!
Interesting The Tunguska event was an aerial explosion that occurred near the Podkamennaya
Fact: (Stony) Tunguska River in what is now Evenkia, Siberia, at 7:17 AM on June 30, 1908.
The size of the blast was later estimated to be equivalent to between 10 and 15 million
tons of regular explosive. It felled an estimated 60 million trees over 2,150 square kilo-
meters.
At around 7:15 AM, Tungus natives and Russian settlers in the hills northwest of Lake
Baikal observed a huge fireball moving across the sky, nearly as bright as the Sun. A few
minutes later, there was a flash that lit up half of the sky, followed by a shock wave that
167
knocked people off their feet and broke windows up to 650 km away (the same as the
distance from Bloemfontein to Durban!). The explosion registered on seismic stations
across Europe and Asia, and produced fluctuations in atmospheric pressure strong enough
to be detected in Britain. Over the next few weeks, night skies over Europe and western
Russia glowed brightly enough for people to read by.
Had the object responsible for the explosion hit the Earth a few hours later, it would
have exploded over Europe instead of the sparsely-populated Tunguska region, producing
massive loss of human life.
In the following picture, a closed can of baked beans is put on a stove or fire:
−
p−→
BAKED can , Ekcan
BEANS
Before the can heats up and explodes, the total momentum of the system is:
−−−−→
pBef = −−→
p
ore can
= 0
and the total kinetic energy of the system is:
EkBef ore = Ekcan

= 0
since the can isn’t moving. Once the mixture of beans, juice and air inside the can reach a certain
temperature, the pressure inside the can becomes so great that the can explodes! Beans and
sharp pieces of metal can fly out in all directions. Energy in the system has been transformed
from heat energy into kinetic energy.
→
−
p4 , Ek4 →
−
p1 , Ek1
→
−
p3 , Ek3
→
−
p2 , Ek2
168
After the explosion, the can is completely destroyed. But momentum is always conserved, so:
−−−−→
pBef = −
p−−−→
ore Af ter
−−−−→
pBef = −
→
p1 + →−
p2 + →
−
p3 + →
−
p4
ore
0 −
→ →
−
= p +p +p +p →
− →
−
1 2 3 4
However, the kinetic energy of the system is not conserved. The can’s shape was changed in the
explosion. Before the explosion the can was not moving, but after the explosion, the pieces of
metal and baked beans were moving when they were flying out in all directions! So:
EkB 6= EkA
Safety tip: Never heat a closed can on a stove or fire! Always open
the can or make a hole in the lid to allow the pressure inside and outside
the can to remain equal. This will prevent the can from exploding!
Worked Example 50
Explosions 1
Question: An object with mass mT ot = 10 kg is sitting at rest. Suddenly it explodes

into two pieces. One piece has a mass of m1 = 5 kg and moves off in the negative
x-direction at →
−
v1 = 3ms−1 . What is the velocity of the other piece?
Answer:
Before the explosion, the object is at rest:
−−→ = 0, E
p T ot kT ot = 0
After the explosion, the two pieces move off:
1 2
→
−
p1 , Ek1 →
−
p2 , Ek2

Now we know that in an explosion, total kinetic energy is not conserved. There is a
definite change in shape of the exploding object! But we can always use momentum
conservation to solve the problem. So:
−−−−→
pBef = −
p−−−→
ore Af ter
−−−−→
pBef = →
−
p1 + →−
p2
ore
169
But the object was initially at rest so:
0 = →
−
p1 + →−
p2
0 = m 1 v1 + m 2 →
→
− −
v2 (A)
Step 3 : Find the mass of the second piece
Now we know that m1 = 5 kg but we do not know what the mass of m2 is. However,
we do know that:
mT ot = m1 + m2
m2 = mT ot − m1
= 10 kg − 5 kg
= 5 kg
Step 4 : Solve for and quote the velocity of the other piece
Now we can substitute all the values we know into equation (A) and solve for →
−
v2 . Let’s
choose the positive x-direction to have a postive sign and the negative x-direction to
have a negative sign:
0 = m1 →
−
v1 + m 2 →
−
v2 (A)
0 = →
−
5(−3) + 5 v 2
0 = −15 + 5→
−
v2
→
−
5 v2 = 15
→
−v = +3 m.s−1
2
Therefore,
→
−
v2 = 3 m.s−1 in the positive x − direction.
Worked Example 51
Explosions 2
Question: An object with mass mT ot =15 kg is sitting at rest. Suddenly it explodes

into two pieces. One piece has a mass of m1 = 5000 g and moves off in the positive
x-direction at v1 = 7ms−1 . What is the final velocity of the other piece?
Answer:
−−→ = 0, E
p T ot kT ot = 0
170
2 1
→
−
p2 , Ek2 →
−
p1 , Ek1
Step 2 : Convert all units into S.I. units
m1 = 5000 g
m1 = 5 kg
Now we know that in an explosion, total kinetic energy is not conserved. There is a
− −−−→
pBef = −
p−−−→
ore Af ter
−
p −−− → = →
−
p +→ −
p
Bef ore 1 2

0 = →
−
p1 + →
−
p2
0 = m1 →
−
v1 + m 2 →
−
v2 (A)
Step 4 : Determine the mass of the other piece
Now we know that m1 = 5 kg but we do not know what the mass of m2 is. However,
we do know that:
mT ot = m1 + m2
m2 = mT ot − m1
= 15 kg − 5 kg
= 10 kg
Step 5 : Solve for and quote the final velocity of the other piece
−
v2 . Let’s
0 = v1 + m 2 →
m1 →
− −
v2 (A)
0 = →
−
5(7) + 10( v2 )
0 = 35 + 10(→
−
v2 )
10(→
−
v2 ) = −35
→
−
v2 = −3.5 m.s−1
Therefore,
→
−
v2 = 3.5 m.s−1 in the negative x − direction.
171
9.3 Explosions: Energy and Heat
In explosions, you have seen that kinetic energy is not conserved. But remember that total
energy is always conserved. Let’s look at what happens to the energy in some more detail. If
a given amount of energy is released in an explosion it is not necessarily all transformed into
kinetic energy. Due to the deformation of the exploding object, often a large amount of the
energy is used to break chemical bonds and heat up the pieces.
Energy is conserved but some of it is transferred through non-conservative processes like
heating. This just means that we cannot get the energy back. It will be radiated into the
Long problem
environment as heat energy but it is all still accounted for.
should be trea
Now we can start to mix the ideas of momentum conservation with energy transfer to make
like a number
longer problems. These problems are not more complicated just longer. We will start off short
smaller problem
and them combine the different ideas later on.
Focus on them
at a time.
Worked Example 52
Energy Accounting 1
Question: An object with a mass of mt = 17 kg explodes into two pieces of mass

m1 = 7 kg and m2 = 10 kg. m1 has a velocity of 9ms−1 in the negative x-direction
and m2 has a velocity of 6.3ms−1 in the positive x-direction. If the explosion released
a total energy of 2000 J, how much was used in a non-conservative way?
Answer:
−−→ = 0, E
p T ot kT ot = 0

E = 2000 J
2 1
→
−
p2 , Ek2 →
−
p1 , Ek1
Step 2 : (NOTE TO SELF: step is deprecated, use westep instead.)

Determine what is being asked We are asked how much energy was used in a non-
conservative fashion. This is the difference between how much energy was used in
a conservative fashion and how much was used in total. We are lucky because we
have everything we need to determine the kinetic energy of both pieces. The kinetic
energy of the pieces is energy that was used in a conservative way.
172
Step 3 : Determine the total kinetic energy
The sum of the kinetic energy for the two blocks is the total kinetic energy of the
pieces. So:
EkT ot = Ek1 + Ek2

1 → 1 −2
= m1 −
v 1 2 + m2 →
v2
2 2
1 1
= (7)(9)2 + (10)(6.3)2
2 2
= 283.5 + 198.45
EkT ot = 481.95 J
Step 4 : Solve for and quote the final answer

The total energy that was transformed into kinetic energy is 481.95 J. We know that
2000 J of energy were released in total. the question makes no statements about other
types of energy so we can assume that the difference was lost in a non-conservative
way. Thus the total energy lost in non-conservative work is:
E − EkT ot = 2000 − 481.95

= 1518.05 J
Worked Example 53
Energy Accounting 2
Question: An object at rest, with mass mT ot = 4 kg, explodes into two pieces (m1 ,
m2 ) with m1 = 2.3 kg. m1 has a velocity of 17ms−1 in the negative x-direction. If
the explosion released a total energy of 800 J,
1. What is the velocity of m2 ?
2. How much energy does it carry?
3. And how much energy was used in a non-conservative way?
Answer:
−−→ = 0, E
p T ot kT ot = 0
173
E = 800 J
1 2
→
−
p1 , Ek1 →
−
p2 , Ek2
Step 2 : N
ow we know that in an explosion, total kinetic energy is not conserved. There is a
− −−−→
pBef = −
p−−−→
ore Af ter
−
p −−−→ = →
−
p +→ −
p
Bef ore 1 2
0 = →
−
p1 + →−
p2
0 = m 1 v1 + m 2 →
→
− −
v2 (A)

Now we know that m1 = 2.3 kg but we do not know what the mass of m2 is. However,
we do know that:
mT ot = m1 + m2
m2 = mT ot − m1
= 4 kg − 2.3 kg
= 1.7 kg

−
v2 . Let’s
0 = v1 + m 2 →
m1 →
− −
v2 (A)
0 = (2.3)(−17) + 1.7→
−
v2
0 = →
−
−39.1 + 1.7 v 2
→
−
1.7 v2 = 39.1
→
−v2 = 23 m.s−1
• →
−
v2 = 23 m.s−1 in the positive x -direction

Now we need to calculate the energy that the second piece carries:
1 →
Ek2 = m2 −
v2 2
2
1
= (1.7)(23)2
2
= 449.65 J
174
• The kinetic energy of the second piece is Ek2 = 449.65 J

Now the amount of energy used in a non-conservative way in the explosion, is the
difference between the amount of energy released in the explosion and the total kinetic
energy of the exploded pieces:
E − EkT ot = 800 − EkT ot
We know that:
EkT ot = Ek1 + Ek2
1 →
= m1 −
v1 2 + 449.65
2
1
= (2.3)(17)2 + 449.65
2
= 332.35 + 449.65
= 782 J
So going back to:
E − EkT ot = 800 − EkT ot
= 800 − 782
= 18 J
• 18 J of energy was used in a non-conservative way in the explosion
Units
velocity →
−
v — m
or m.s−1 X
s
momentum →
−
p — kg.m
or kg.m.s−1 X
s
kg.m2
energy E J s2 or kg.m2 s−2 —
Table 9.1: Units commonly used in Collisions and Explosions
Momentum:
→
−
p = m→
−
v (9.13)
Kinetic energy:
1 →
Ek = m−
v2 (9.14)
2
175
Chapter 10
Newtonian Gravitation
10.1 Properties
Gravity is a force and therefore must be described by a vector - so remember magnitude and
direction. Gravity is a force that acts between any two objects with mass. To determine the
magnitude of the force we use the following equation:
Gm1 m2
F = (10.1)
r2
This equation describes the force between two bodies, one of mass m1 , the other of mass m2
(both have units of Kilogrammes, or Kg for short). The G is Newton’s ‘Gravitational Constant’
(6.673 × 10−11 [Nm2 kg−2 ]) and r is the straight line distance between the two bodies in meters.
This means the bigger the masses, the greater the force between them. Simply put, big
things matter big with gravity. The 1/r 2 factor (or you may prefer to say r −2 ) tells us that the
distance between the two bodies plays a role as well. The closer two bodies are, the stronger
the gravitational force between them is. We feel the gravitational attraction of the Earth most
at the surface since that is the closest we can get to it, but if we were in outer-space, we would
barely even know the Earth’s gravity existed!
Remember that
F = ma (10.2)
which means that every object on the earth feels the same gravitational acceleration! That means
whether you drop a pen or a book (from the same height), they will both take the same length
of time to hit the ground... in fact they will be head to head for the entire fall if you drop them
at the same time. We can show this easily by using the two equations above (10.1 and 10.2).
The force between the Earth (which has the mass me ) and an object of mass mo is
Gmo me
F = (10.3)
r2
and the acceleration of an object of mass mo (in terms of the force acting on it) is
F
ao = (10.4)
mo
So we substitute equation (10.3) into equation (10.4), and we find that
Gme
ao = (10.5)
r2
176
Since it doesn’t matter what mo is, this tells us that the acceleration on a body (due to the Earth’s
gravity) does not depend on the mass of the body. Thus all objects feel the same gravitational
acceleration. The force on different bodies will be different but the acceleration will be the same.
Due to the fact that this acceleration caused by gravity is the same on all objects we label it
differently, instead of using a we use g which we call the gravitational acceleration.
10.2 Mass and Weight

Weight is a force which is measured in Newtons, it is the force of gravity on an object. People are
always asking other people “What is your weight?” when in fact they should be asking “What
is your mass?”.
Mass is measured in Kilograms (Kg) and is the amount of matter in an object, it doesn’t
change unless you add or remove matter from the object (if you continue to study physics through
to university level, you will find that Einstein’s theory of relativity means that mass can change
when you travel as fast as light does, but you don’t need to worry about that right now). There
are 1000g in 1Kg and 1000Kg in a Tonne.
To change mass into weight we use Newton’s 2nd Law which is F = Ma. The weight is the
force and gravity the acceleration, it can be rewritten as:
W = mg (10.6)
W is the Weight, measured in Newtons. M is the Mass, measured in Kg and g is the acceleration
due to gravity, measured in m/s2 it is equal to 10 on the Earth.
10.2.1 Examples
1. A bag of sugar has a mass of 1Kg, what is it’s weight? (Acceleration due to gravity =
10m/s2 )
- Step 1: Always write out the equation, it helps you to understand the question, and
you will get marks as well.
W = Mg (10.7)
- Step 2: Fill in all the values you know. (remember to make sure the mass is in Kg
and NOT in grams or Tonnes!)
W = 1 × 10
W = 10 (10.8)
- Step 3: Write out the answer remembering to include the units! You will lose marks
if you don’t
W = 10Newtons (10.9)
2. A space-man has a mass of 90Kg, what is his weight (a) on the earth? (b) on the moon?
(c) in outer space? (The acceleration due to gravity on the earth is 10m/s2 , on the moon
gravity is 1/6 of the gravity on earth).
(a)
W = Mg
W = 90 × 10 = 900
W = 900Newtons (10.10)
177
(b)
W = Mg
W = 90 × 10 × 1/6 = 150
W = 150Newtons (10.11)
(c) Weightless in outer space because g = 0.
So now when somebody asks you your weight, you know to reply “Anything!! But my mass
is a different matter!”
10.3 Normal Forces

If you put a book on a table it does not accelerate it just lies on the table. We know that gravity
is acting on it with a force
mE mbook
F =G (10.12)
r2
but if there is a net force there MUST be an acceleration and there isn’t. This means that the
gravitational force is being balanced by another force1 .
This force we call the normal force. It is the reaction force between the book and the table. It
is equal to the force of gravity on the book. This is also the force we measure when we measure
the weight of something.
The most interesting and illustrative normal force question, that is often asked, has to do
with a scale in a lift. Using Newton’s third law we can solve these problems quite easily.
When you stand on a scale to measure your weight you are pulled down by gravity. There
is no acceleration downwards because there is a reaction force we call the normal force acting
upwards on you. This is the force that the scale would measure. If the gravitational force were
less then the reading on the scale would be less.
Worked Example 54
Normal Forces 1
Question: A man weighing 100kg stands on a scale (measuring newtons). What is

the reading on the scale?
Answer:
We are given the mass of the man. We know the gravitational acceleration that acts
on him - g = 10m/s2 .
Step 2 : Decide what equation to use to solve the problem
The scale measures the normal force on the man. This is the force that balances
gravity. We can use Newton’s laws to solve the problem:
Fr = F g + F N (10.13)
where Fr is the resultant force on the man.

1 Newton’s third law!
178
Step 3 : Firstly we determine the net force acting downwards on the man due to
gravity
Fg = mg
m
= 100kg × 9.8
s2
kgm
= 980
s2
= 980N downwards
Step 4 : Now determine the normal force acting upwards on the man
We now know the gravitational force downwards. We know that the sum of all the
forces must equal the resultant acceleration times the mass. The overall resultant
acceleration of the man on the scale is 0 - so Fr = 0.
Fr = Fg + FN
0 = −980N + FN
FN = 980N upwards

The normal force is then 980N upwards. It exactly balances the gravitational force
downwards so there is no net force and no acceleration on the man.
Now we are going to add things to exactly the same problem to show how things change
slightly. We will now move to a lift moving at constant velocity. Remember if velocity is
constant then acceleration is zero.
Worked Example 55
Normal Forces 2
Question: A man weighing 100kg stands on a scale (measuring newtons) inside a

lift moving downwards at 2 m s . What is the reading on the scale?
Answer:
We are given the mass of the man and the acceleration of the lift. We know the
gravitational acceleration that acts on him.
Step 2 : Decide which equation to use to solve the problem
Once again we can use Newton’s laws. We know that the sum of all the forces must
equal the resultant acceleration times the mass (This is the resultant force, F r ).
Fr = F g + F N (10.14)
179
gravity
Fg = mg
m
= 100kg × 9.8
s2
kgm
= 980
s2
= 980N downwards
Step 4 : Now determine the normal force acting upwards on the man
The scale measures this normal force, so once we’ve determined it we will know the
reading on the scale. Because the lift is moving at constant velocity the overall
resultant acceleration of the man on the scale is 0. If we write out the equation:
Fr = Fg + FN
0 = −980N + FN
FN = 980N upwards

The normal force is then 980N upwards. It exactly balances the gravitational force
downwards so there is no net force and no acceleration on the man.
In this second example we get exactly the same result because the net acceleration on the
man was zero! If the lift is accelerating downwards things are slightly different and now we will
get a more interesting answer!
Worked Example 56
Normal Forces 3

lift accelerating downwards at 2 sm2 . What is the reading on the scale?
Answer:
We are given the mass of the man and his resultant acceleration - this is just the
acceleration of the lift. We know the gravitational acceleration that acts on him.
Fr = F g + F N (10.15)
180
gravity, Fg
Fg = mg
m
= 100kg × 9.8
s2
kgm
= 980
s2
= 980N downwards
Step 4 : Now determine the normal force acting upwards on the man, F N
We know that the sum of all the forces must equal the resultant acceleration times the
mass. The overall resultant acceleration of the man on the scale is 2 sm2 downwards.
If we write out the equation:
Fr = Fg + FN
m
100kg × (−2) 2 = −980N + FN
s
kgm
−200 2 = −980N + FN
s
−200N = −980N + FN
FN = 780N upwards

The normal force is then 780N upwards. It balances the gravitational force down-
wards just enough so that the man only accelerates downwards at 2 sm2 .
Worked Example 57
Normal Forces 4

lift accelerating upwards at 4 sm2 . What is the reading on the scale?
Answer:
We are given the mass of the man and his resultant acceleration - this is just the
acceleration of the lift. We know the gravitational acceleration that acts on him.
Fr = F g + F N (10.16)
181
gravity, Fg
Fg = mg
m
= 100kg × 9.8
s2
kgm
= 980
s2
= 980N downwards
Step 4 : Now determine the normal force upwards, FN

We know that the sum of all the forces must equal the resultant acceleration times the
mass. The overall resultant acceleration of the man on the scale is 2 sm2 downwards.
if we write out the equation:
Fr = Fg + FN
m
100kg × (4) 2 = −980N + FN
s
kgm
400 2 = −980N + FN
s
400N = −980N + FN
FN = 1380N upwards

The normal force is then 1380N upwards. It balances the gravitational force and
then in addition applies sufficient force to accelerate the man upwards at 4 sm2 .
10.4 Comparative problems

Here always work with multiplicative factors to find something new in terms of something old.
Worked Example 58
Comparative Problem 1
Question:On Earth a man weighs 70kg. Now if the same man was instantaneously
beamed to the planet Zirgon, which has the same size as the Earth but twice the
mass, what would he weigh? (NOTE TO SELF: Vanessa: isn’t this confusing weight
and mass?)
Answer:
182
Step 1 : We start with the situation on Earth
mE m
W = mg = G (10.17)
r2
Step 2 : Now we consider the situation on Zirgon
mZ m
WZ = mgZ = G 2 (10.18)
rZ
Step 3 : Relation between conditions on Earth and Zirgon
but we know that mZ = 2mE and we know that rZ = r so we could write the equation
again and substitute these relationships in:
Step 4 : Substitute
(2mE )m
WZ = mgZ = G (10.19)
(r)2
(mE )m
WZ = 2(G ) (10.20)
(r)2
Step 5 : Relation between weight on Zirgon and Earth
WZ = 2(W ) (10.21)
so on Zirgon he weighs 140kg.
10.4.1 Principles
• Write out first case
• Write out all relationships between variable from first and second case
• Write out second case
• Substitute all first case variables into second case
• Write second case in terms of first case
Interesting The acceleration due to gravity at the Earth’s surface is, by convention, equal to 9.80665
Fact: ms−2 . (The actual value varies slightly over the surface of the Earth). This quantity is
known as g. The following is a list of the gravitational accelerations (in multiples of g)
at the surfaces of each of the planets in our solar system:
Mercury 0.376
Venus 0.903
Earth 1
Mars 0.38
Jupiter 2.34
Saturn 1.16
Uranus 1.15
Neptune 1.19
Pluto 0.066
183
Note:
The ”surface” is taken to mean the cloud tops of the gas giants (Jupiter, Saturn, Uranus
and Neptune) in the above table.
Worked Example 59
Comparative Problem 2
Question: On Earth a man weighs 70kg. On the planet Beeble how much will he
weigh if Beeble has mass half of that of the Earth and a radius one quarter that of
the earth.
Answer:
Step 1 : Start with the situation on Earth
mE m
W = mg = G (10.22)
r2
Step 2 : Now consider the situation on Beeble
mB m
WB = mgB = G 2 (10.23)
rB
Step 3 : Relation between conditions on Earth and on Beeble
We know that mB = 12 mE and we know that rB = 14 r so we could write the equation
again and substitute these relationships in:
Step 4 : Substitute
(mB )m
WB = mgB = G
(rB )2
( 1 mE )m
= mgB = G 2 1 2
( 4 r)
(mE )m
= 8(G )
(r)2
Step 5 : Relation between weight on Earth and weight on Beeble
WB = 8(W ) (10.24)
So the man weighs 560kg on Beeble!
184
Interesting Did you know that the largest telescope in the Southern Hemisphere is the South African
Fact: Large Telescope (SALT) which came online in 2005 outside Sutherland in the Karoo.
10.5 Falling bodies

Objects on the earth fall because there is a gravitation force between them and the earth - which
results in an acceleration - as we saw above. So if you hold something in front of you and let it
go - it will fall.
It falls because of an acceleration toward the centre of the earth which results from the
gravitational force between the two.
These bodies move in a straight line from the point where they start to the centre for the
earth. This means we can reuse everything we learnt in rectilinear motion. the only thing that
needs thinking about is the directions we are talking about.
We need to choose either up or down as positive just like we had to choose a positive direction
in standard rectilinear motion problems. this is the hardest part. If you can do rectilinear motion
you can do falling body problems. Just remember the acceleration they feel is constant and
because of gravity - but once you have chosen your directions you can forget that gravity has
anything to do with the problem - all you have is a rectilinear motion problem with a constant
acceleration!!
10.6 Terminal velocity

Physics is all about being simple - all we do is look at the world around us and notice how it
really works. It is the one thing everyone is qualified to do - we spend most of our time when we
are really young experimenting to find out how things work.
Take a book - wave it in the air - change the angle and direction. what happens of course
there is resistance. different angles make it greater - the faster the book moves the greater it is.
The bigger the area of the book moving in the direction of motion the greater the force.
So we know that air resistance exists! it is a force. So what happens when an object falls? of
course there is air resistance - or drag as it is normally called. There is an approximate formula
for the drag force as well.
The important thing to realise is that when the drag force and the gravitational force are
equal for a falling body there is no net force acting on it - which means no net acceleration. That
does not mean it does not move - but it means that its speed does not change.
It falls at a constant velocity! This velocity is called terminal velocity.
10.7 Drag force

The actual force of air resistance is quite complicated. Experiment by moving a book through
the air with the face of the book and then the side of the book forward, you will agree that the
area of the book makes a difference as to how much you must work in order to move the book at
the same speed in both cases. This is why racing cars are slim-lined in design, and not shaped
like a big box!
185
Get a plastic container lid (or anything waterproof) swing it around in air and then try to
swing it around under water. The density of the water is much larger than the air, making you
have to work harder at swinging the lid in water. This is why boats and submarines are a lot
slower than aeroplanes!
So we know that density, area and speed all play a role in the drag force. The expression we
use for drag force is
1
D = CρAv 2 (10.25)
2
where C is a constant which depends on the object and fluid interactions, ρ is the density, A is
the area and v is the velocity.
Units
mass m — kg or — —
velocity →
−
v — m
or m.s−1 X
s
→
− kg.m
force F N s2 or kg.m.s−2 X
kg.m2
energy E J s2 or kg.m2 .s−2 —
Table 10.1: Units used in Newtonian Gravitation
186
Chapter 11
Pressure
Units
or
Table 11.1: Units used in Pressure
187
Essay 3 : Pressure and Forces
Author: Asogan Moodaly
Asogan Moodaly received his Bachelor of Science degree (with honours) in Mechanical Engineering
from the University of Natal, Durban in South Africa. For his final year design project he worked on
a 3-axis filament winding machine for composite (Glass re-enforced plastic in this case) piping. He
worked in Vereeniging, Gauteng at Mine Support Products (a subsidiary of Dorbyl Heavy Engineering)
as the design engineer once he graduated. He currently lives in the Vaal Triangle area and is working
for Sasol Technology Engineering as a mechanical engineer, ensuring the safety and integrity of
equipment installed during projects.
Pressure and Forces

In the mining industry, the roof (hangingwall) tends to drop as the face of the tunnel (stope)
is excavated for rock containing gold.
As one can imagine, a roof falling on one’s head is not a nice prospect! Therefore the roof
needs to be supported.
Roof Face
The roof is not one big uniform chunk of rock. Rather it is broken up into smaller chunks.
It is assumed that the biggest chunk of rock in the roof has a mass of less than 20 000 kgs
therefore each support has to be designed to resist a force related to that mass. The strength of
the material (either wood or steel) making up the support is taken into account when working
out the minimum required size and thickness of the parts to withstand the force of the roof.
Roof Face
Supports
188
Sometimes the design of the support is such that the support needs to withstand the rock
mass without the force breaking the roof..
Therefore hydraulic supports (hydro = water) use the principles of force and pressure such
that as a force is exerted on the support, the water pressure increases. A pressure relief valve
then squirts out water when the pressure (and thus the force) gets too large. Imagine a very
large, modified doctor’s syringe.
Hydraulic support Doctor’s syringe
Force Force
Seal to trap
water in tube Pressure relief Rubber seal to
valve trap medicine
in syringe
Water filled Pressure Pressure
tube
In the petrochemical industry, there are many vessels and pipes that are under high pressures.
A vessel is a containment unit (Imagine a pot without handles, that has the lid welded to the pot
that would be a small vessel) where chemicals mix and react to form other chemicals, amongst
other uses.
End Product
Chemical
The end product chemicals are sold to companies that use these chemicals to make shampoo,
dishwashing liquid, plastic containers, fertilizer, etc. Anyway, some of these chemical reactions
require high temperatures and pressures in order to work. These pressures result in forces being
applied to the insides of the vessels and pipes. Therefore the minimum thickness of the pipe and
vessels walls must be determined using calculations, to withstand these forces. These calculations
take into account the strength of the material (typically steel, plastic or composite), the diameter
and of course the pressure inside the equipment. Let examine the concepts of force and pressure
in further detail.
189
Chapter 12
Heat and Properties of Matter
12.1 Phases of matter

12.1.1 Density
Matter is a substance which has mass and occupies space. The density of matter refers to how
much mass is in a given volume. Said differently, you can imagine the density to be the amount
of mass packed into a given volume.
M ass
density =
V olume
If we consider a bar of soap and a bar of steel with the same volume, the steel will have more
mass because it has a greater density. The density is greater in steal because more atoms are
closely packed in comparison to the soap. Although they are both the same size, the bar of steel
will be ”heavier” because it has more mass.
Worked Example 60
Density of objects
A bar of aluminum (Al) has dimensions 2cm x 3cm x 5cm with a mass of 81g. A bar
of lead (Pb) has dimensions 3cm x 3cm x 5cm and a mass of 510.3g. Calculate the
density of the aluminum and lead.
Solution:
First we calculate the volume of Al and Pb:
volume = Length ∗ W idth ∗ Height
For Aluminum: volume = 2cm ∗ 3cm ∗ 5cm = 30cm3

For Lead: volume = 3cm ∗ 3cm ∗ 5cm = 45cm3
We can now calculate the densities using the mass and volume of each material.
81g
For Aluminum: density = 30cm3 = 2.7g/cm3
510.3g
For Lead: density = 45cm3 = 11.34g/cm3
190
5cm 5cm
2cm 3cm
3cm 3cm
Now that you know the density of aluminum and lead, which object would be bigger
(larger volume): 1kg of Lead or 1kg of Aluminum.
Solution:
1kg of aluminum will be much larger in volume than 1kg of lead. Aluminum has a
smaller density so it will take a lot more of it to have a weight of 1kg. Lead is much
more dense, so it will take less for it to weigh 1kg.
The density of liquids and gases can be calculated the same way as in solids. If the mass and
volume of a liquid is known, the density can be calculated. We can often determine which liquid
has a greater density by mixing two liquids and seeing how they settle. The more dense liquid
will fall towards the bottom, or ’sink’. If you have ever added olive oil to water, you have seen
it sits on the surface, or ’floats’. This is because olive oil is less dense than water. Fog occurs
when water vapor becomes more dense than air(”a cloud that sinks in air”).
This principle can be used with solids and liquids. In fact, it is the density of an object that
determines if it will float or sink in water. Objects with densities greater than water will sink.
Worked Example 61
Objects floating in water
Ivory soap is famous for ”soap that floats”. If a 5cm x 3cm x 10cm bar of ivory soap
weighs 1.35 Newtons, show that its density is less than water.
Solution:
First calculate the bars volume: volume = 3cm ∗ 5cm ∗ 10cm = 150cm3
Now we must determine the mass of the bar based on its weight. We will use Newton’s
Second law (F = ma):
W eight = mass ∗ gravity =⇒ W eight = 9.8m/s2 ∗ M ass
191
1.35N
M ass = = .138kg
9.8m/s2
Using the mass and the volume we determine the density of the soap:
138g
density = = .92g/cm3
150cm3
Water has a density of 1g/cm3 , therefore the soap is less dense than water, allowing
it to float.
12.2 Phases of matter

Although phases are conceptually simple, they are hard to define precisely. A good definition of
a phase of a system is a region in the parameter space of the system’s thermodynamic variables
in which the free energy is analytic. Equivalently, two states of a system are in the same phase if
they can be transformed into each other without abrupt changes in any of their thermodynamic
properties.
All the thermodynamic properties of a system – the entropy, heat capacity, magnetization,
compressibility, and so forth – may be expressed in terms of the free energy and its derivatives.
For example, the entropy is simply the first derivative of the free energy with temperature. As
long as the free energy remains analytic, all the thermodynamic properties will be well-behaved.
When a system goes from one phase to another, there will generally be a stage where the
free energy is non-analytic. This is known as a phase transition. Familiar examples of phase
transitions are melting (solid to liquid), freezing (liquid to solid), boiling (liquid to gas), and
condensation (gas to liquid). Due to this non-analyticity, the free energies on either side of the
transition are two different functions, so one or more thermodynamic properties will behave very
differently after the transition. The property most commonly examined in this context is the
heat capacity. During a transition, the heat capacity may become infinite, jump abruptly to a
different value, or exhibit a ”kink” or discontinuity in its derivative.
In practice, each type of phase is distinguished by a handful of relevant thermodynamic
properties. For example, the distinguishing feature of a solid is its rigidity; unlike a liquid or a
gas, a solid does not easily change its shape. Liquids are distinct from gases because they have
much lower compressibility: a gas in a large container fills the container, whereas a liquid forms
a puddle in the bottom. Many of the properties of solids, liquids, and gases are not distinct;
for instance, it is not useful to compare their magnetic properties. On the other hand, the
ferromagnetic phase of a magnetic material is distinguished from the paramagnetic phase by the
presence of bulk magnetization without an applied magnetic field.
To take another example, many substances can exist in a variety of solid phases each corre-
sponding to a unique crystal structure. These varying crystal phases of the same substance are
called polymorphs. Diamond and graphite are examples of polymorphs of carbon. Graphite is
composed of layers of hexagonally arranged carbon atoms, in which each carbon atom is strongly
bound to three neighboring atoms in the same layer and is weakly bound to atoms in the neigh-
boring layers. By contrast in diamond each carbon atom is strongly bound to four neighboring
carbon atoms in a cubic array. The unique crystal structures of graphite and diamond are
responsible for the vastly different properties of these two materials.
Metastable phases
192
Metastable states may sometimes be considered as phases, although strictly speaking they
aren’t because they are unstable. For example, each polymorph of a given substance is usually
only stable over a specific range of conditions. For example, diamond is only stable at extremely
high pressures. Graphite is the stable form of carbon at normal atmospheric pressures. Although
diamond is not stable at atmospheric pressures and should transform to graphite, we know that
diamonds exist at these pressures. This is because at normal temperatures the transformation
from diamond to graphite is extremely slow. If we were to heat the diamond, the rate of
transformation would increase and the diamond would become graphite. However, at normal
temperatures the diamond can persist for a very long time.
Another important example of metastable polymorphs occurs in the processing of steel. Steels
are often subjected to a variety of thermal treatments designed to produce various combinations
of stable and metastable iron phases. In this way the steel properties, such as hardness and
strength can be adjusted by controlling the relative amounts and crystal sizes of the various
phases that form.
Phase diagrams
The different phases of a system may be represented using a phase diagram. The axes of
the diagrams are the relevant thermodynamic variables. For simple mechanical systems, we
generally use the pressure and temperature. The following figure shows a phase diagram for a
typical material exhibiting solid, liquid and gaseous phases.
The markings on the phase diagram show the points where the free energy is non-analytic.
The open spaces, where the free energy is analytic, correspond to the phases. The phases are
separated by lines of non-analyticity, where phase transitions occur, which are called phase
boundaries.
In the above diagram, the phase boundary between liquid and gas does not continue indef-
initely. Instead, it terminates at a point on the phase diagram called the critical point. This
reflects the fact that, at extremely high temperatures and pressures, the liquid and gaseous
phases become indistinguishable. In water, the critical point occurs at around 647 K (374 C or
705 F) and 22.064 MPa.
The existence of the liquid-gas critical point reveals a slight ambiguity in our above definitions.
When going from the liquid to the gaseous phase, one usually crosses the phase boundary, but
it is possible to choose a path that never crosses the boundary by going to the right of the
critical point. Thus, phases can sometimes blend continuously into each other. We should note,
however, that this does not always happen. For example, it is impossible for the solid-liquid
phase boundary to end in a critical point in the same way as the liquid-gas boundary, because
the solid and liquid phases have different symmetry.
An interesting thing to note is that the solid-liquid phase boundary in the phase diagram
of most substances, such as the one shown above, has a positive slope. This is due to the
solid phase having a higher density than the liquid, so that increasing the pressure increases the
melting temperature. However, in the phase diagram for water the solid-liquid phase boundary
has a negative slope. This reflects the fact that ice has a lower density than water, which is an
unusual property for a material.
193
12.2.1 Solids, liquids, gasses
12.2.2 Pressure in fluids
12.2.3 change of phase
12.3 Deformation of solids

12.3.1 strain, stress
Stress (σ) and strain (²) is one of the most fundamental concepts used in the mechanics of
materials. The concept can be easily illustrated by considering a solid, straight bar with a
constant cross section throughout its length where a force is distributed evenly at the ends of the
bar. This force puts a stress upon the bar. Like pressure, the stress is the force per unit area.
In this case the area is the cross sectional area of the bar.
F orce F
stress = =⇒ σ=
Areacrosssection A
(A) Bar under compression (B) Bar under tension
Figure 12.1: Illustration of Bar

→
−
The bar in figure 1a is said to be under compression. If the direction of the force ( F ), were
reversed, stretching the bar, it would be under tension (fig. 1b). Using intuition, you can imagine
how the bar might change in shape under compression and tension. Under a compressive load,
the bar will shorten and thicken. In contrast, a tensile load will lengthen the bar and make it
thinner.
Figure 12.2: Bar changes length under tensile stress
For a bar with an original length L, the addition of a stress will result in change of length
4L. With 4L and L we can now define strain as the ratio between the two. That is, strain is
defined as the fractional change in length of the bar:
4L
Strain ≡
L
12.3.2 Elastic and plastic behavior

Material properties are often characterized by a stress versus strain graph (figure x.xx). One
way in which these graphs can be determined is by tensile testing. In this process, a machine
194
L 4L
Figure 12.3: Left end of bar is fixed as length changes

|
+
|
Figure 12.4: dashed line represents plastic recovery **incomplete**
stretches a the material by constant amounts and the corresponding stress is measured and
plotted. Typical solid metal bars will show a result like that of figure x.xx. This is called a Type
II response. Other materials may exibit different responses. We will only concern ourself with
Type II materials.
The linear region of the graph is called the elastic region. By obtaining the slope of the linear
region, it is easy to find the strain for a given stress, or vice-versa. This slope shows itself to
be very useful in characterizing materials, so it is called the Modulus of Elasticity, or Young’s
Modulus:
stress F/A
E= =
strain ∆L/L
The elastic region has the unique property that allows the material to return to its original
shape when the stress is removed. As the stress is removed it will follow line back to zero. One
may think of stretching a spring and then letting it return to its original length. When a stress
is applied in the linear region, the material is said to undergo elastic deformation.
When a stress is applied that is in the non-linear region, the material will no longer return to
its original shape. This is referred to as plastic deformation. If you have overstretched a spring
you have seen that it no longer returns to its initial length; it has been plastically deformed. The
stress where plastic behavior begins is called the yield strength (point A, fig x).
When a material has plastically deformed it will still recover some of its shape (like an
overstretched spring). When a stress in the non-linear region is removed, the stress strain graph
will follow a line with a slope equal to the modulus of elasticity (see the dashed line in figure
x.xx). The plastically deformed material will now have a linear region that follows the dashed
line.
Greater stresses in the plastic region will eventually lead to fracture (the material breaks).
The maximum stress the material can undergo before fracture is the ultimate strength.
195
|
+
|
Figure 12.5: dashed line represents plastic recovery **incomplete**
12.4 Ideal gasses
Author: Gérald Wigger
Gérald Wigger started his Physics studies at ETH in Zuerich, Switzerland. He moved to Cape
Town, South Africa, for his Bachelor of Science degree (with honours) in Physics from the University
of Cape Town in 1998. Returned to Switzerland, he finished his Diploma at ETH in 2000 and followed
up with a PhD in the Solid State Physics group of Prof. Hans-Ruedi Ott at ETH. He graduated
in the year 2004. Being awarded a Swiss fellowship, he moved to Stanford University where he is
currently continuing his Physics research in the field of Materials with novel electronic properties.
Any liquid or solid material, heated up above its boiling point, undergoes a transition into
a gaseous state. For some materials such as aluminium, one has to heat up to three thousand
degrees Celsius (◦ C), whereas Helium is a gas already at -269 ◦ C. For more examples see Table
12.1. As we find very strong bonding between the atoms in a solid material, a gas consists of
molecules which do interact very poorly. If one forgets about any electrostatic or intermolecular
attractive forces between the molecules, one can assume that all collisions are perfectly elastic.
One can visualize the gas as a collection of perfectly hard spheres which collide but which
otherwise do not interact with each other. In such a gas, all the internal energy is in the form
of kinetic energy and any change in internal energy is accompanied by a change in temperature.
Such a gas is called an ideal gas.
In order for a gas to be described as an ideal gas, the temperature should be raised far
enough above the melting point. A few examples of ideal gases at room temperature are Helium,
Argon and hydrogen. Despite the fact that there are only a few gases which can be accurately
described as an ideal gas, the underlying theory is widely used in Physics because of its beauty
and simplicity.
A thermodynamic system may have a certain substance or material whose quantity can be
expressed in mass or mols in an overall volume. These are extensive properties of the system.
In the following we will be considering often intensive versus extensive quantities. A material’s
intensive property, is a quantity which does not depend on the size of the material, such as
temperature, pressure or density. Extensive properties like volume, mass or number of atoms on
196
Material Temperature in Celsius Temperature in Kelvin
Aluminium 2467 ◦ C 2740 K
Water 100 ◦ C 373.15 K
Ethyl alcohol 78.5 ◦ C 351.6 K
Methyl ether -25 ◦ C 248 K
Nitrogen -195.8 ◦ C 77.3 K
Helium -268.9 ◦ C 4.2 K
Table 12.1: Boiling points for various materials in degrees Celsius and in Kelvin
quantity unit intensive or extensive

pressure p Pa intensive
volume V m3 extensive
molar volume vmol m3 /mol intensive
temperature T K intensive
mass M kg extensive
density ρ kg/m3 intensive
internal energy E J extensive
Table 12.2: Intensive versus extensive properties of matter
the other hand gets bigger the bigger the material is (see Table 12.2 for various intensive/extensive
properties). If the substance is evenly distributed throughout the volume in question, then a
value of volume per amount of substance may be used as an intensive property. For an example,
for an amount called a mol, volume per mol is typically called molar volume. Also, a volume
per mass for a specific substance may be called specific volume. In the case of an ideas gas, a
simple equation of state relates the three intensive properties, temperature, pressure, and molar
or specific volume. Hence, for a closed system containing an ideal gas, the state can be specified
by giving the values of any two of pressure, temperature, and molar volume.
12.4.1 Equation of state

The ideal gas can be described with a single equation. However, in order to arrive there, we
will be introducing three different equations of state, which lead to the ideal gas law. The
combination of these three laws leads to a complete picture of the ideal gas.
1661 - Robert Boyle used a U-tube and Mercury to develop a mathematical relationship
between pressure and volume. To a good approximation, the pressure and volume of a fixed
amount of gas at a constant temperature were related by
p · V = constant
p : pressure (P a)
V : Volume (m3 )
In other words, if we compress a given quantity of gas, the pressure will increase. And if we
put it under pressure, the volume of the gas will decrease proportionally.
197
Figure 12.6: Pressure-Volume diagram for the ideal gas at constant temperature.
Worked Example 62
compressed Helium gas
A sample of Helium gas at 25◦ C is compressed from 200 cm3 to 0.240 cm3 . Its
pressure is now 3.00 cm Hg. What was the original pressure of the Helium?
Solution:
It’s always a good idea to write down the values of all known variables, indicating
whether the values are for initial or final states. Boyle’s Law problems are essentially
special cases of the Ideal Gas Law:
Initial: p1 = ?; V1 = 200 cm3 ;
Final: p2 = 3.00 cm Hg; V2 = 0.240 cm3 ;
Since the number of molecules stays constant and the temperature is not changed
along the process, so
p1 · V 1 = p 2 · V 2
hence
p1 = p2 · V2 /V1 = 3.00cmHg · 0.240cm3 /200cm3

Setting in the values yields p1 = 3.60 · 10−3 cm Hg.
Did you notice that the units for the pressure are in cm Hg? You may wish to convert
this to a more common unit, such as millimeters of mercury, atmospheres, or pascals.
3.60 · 10−3 Hg · 10mm/1 cm = 3.60 · 10−2 mm Hg
198
3.60 · 10−3 Hg · 1 atm/76.0 cm Hg = 4.74 · 10−5 atm
One way to experience this is to dive under water. There is air in your middle ear, which
is normally at one atmosphere of pressure to balance the air outside your ear drum. The water
will put pressure on the ear drum, thereby compressing the air in your middle ear. Divers must
push air into the ear through their Eustacean tubes to equalize this pressure.
Worked Example 63
pressure in the ear of a diver
How deep would you have to dive before the air in your middle ear would be com-
pressed to 75% of its initial volume? Assume for the beginning that the temperature
of the sea is constant as you dive.
Solution:
First we write down the pressure as a function of height h:
p = p0 + ρ · g · h
where we take for p0 the atmospheric pressure at height h = 0, ρ is the density of

water at 20 degrees Celsius 998.23 kg/m3 , g = 9.81 ms−2 .
As the temperature is constant, it holds for both heights h
p0 · V0 = (p0 + ρgh) · Ve
Now solving for h using the fact that
Ve /V0 = 0.75
yields
h = (0.75 ∗ p0 − p0 )/(ρg)
Now, how far can the diver dive down before the membranes of his ear brake.
Solution:
As the result is negative, h determines the way he can dive down. h is given as
roughly 2.6 m.
In 1809, the French chemist Joseph-Louis Gay-Lussac investigated the relationship between
the Pressure of a gas and its temperature. Keeping a constant volume, the pressure of a gas
sample is directly proportional to the temperature. Attention, the temperature is measured in
Kelvin! The mathematical statement is as follows:
199
p1 /T1 = p2 /T2 = constant
p1,2 : pressures (P a)
T1,2 : Temperatures (K)
That means, that pressure divided by temperature is a constant. On the other hand, if we
plot pressure versus temperature, the graph crosses 0 pressure for T = 0 K = -273.15 ◦ C as shown
in the following figure. That point is called the absolute Zero. That is where any motion of
molecules, electrons or other particles stops.
Figure 12.7: Pressure-temperature diagram for the ideal gas at constant volume.
Worked Example 64
Gay-Lussac
Suppose we have the following problem:

A gas cylinder containing explosive hydrogen gas has a pressure of 50 atm at a
temperature of 300 K. The cylinder can withstand a pressure of 500 atm before it
bursts, causing a building-flattening explosion. What is the maximum temperature
the cylinder can withstand before bursting?
Solution: Let’s rewrite this, identifying the variables:
A gas cylinder containing explosive hydrogen gas has a pressure of 50 atm (p 1 ) at
a temperature of 300 K (T1 ). The cylinder can withstand a pressure of 500 atm
200
(p2 ) before it bursts, causing a building-flattening explosion. What is the maximum
temperature the cylinder can withstand before bursting?
Plugging in the known variables into the expression for the Gay-Lussac law yields
T2 = p2 /p1 ∗ T1 = 500atm/50atm ∗ 300K = 3000K

we find the answer to be 3000 K.
The law of combining volumes was interpreted by the Italian chemist Amedeo Avogadro in
1811, using what was then known as the Avogadro hypothesis. We would now properly refer to
it as Avogadro’s law:
Equal volumes of gases under the same conditions of temperature and pressure
contain equal numbers of molecules.
This can be understood in the following. As in an ideal gas, all molecules are considered
to be tiny particles with no spatial extension which collide elastically with each other. So, the
kind of gas is irrelevant. Avogadro found that at room temperature, in atmospheric pressure the
volume of a mol of a substance, i.e. 6.022·1023 molecules or atoms, occupies the volume of 22.4
l.
Figure 12.8: Two different gases occupying the same volume under the same circumstances.
Combination of the three empirical gas laws, described in the preceding three sections leads
to the Ideal Gas Law which is usually written as:
p·V =n·R·T
p : pressure (P a)
V : Volume (m3 )
n : number of mols (mol)
R : gas konstant (J/molK)
T : temperature (K)
201
where p = pressure, V = volume, n = number of mols, T = kelvin temperature and R the
ideal gas constant.
The ideal gas constant R in this equation is known as the universal gas constant. It arises from
a combination of the proportionality constants in the three empirical gas laws. The universal
gas constant has a value which depends only upon the units in which the pressure and volume
are measured. The best available value of the universal gas constant is:
J adm3
8.3143510 molK or 8.3143510 kPmolK
Another value which is sometimes convenient is 0.08206 dm3 atm/mol K. R is related to the
Boltzmann-constant as:
R = N 0 · kB (12.1)
where N0 is the number of molecules in a mol of a substance, i.e. 6.022·1023 and kB is
1.308·10−23 J/K is valid for one single particle.
This ideal gas equation is one of the most used equations in daily life, which we show in the
following problem set:
Worked Example 65
ideal gas 1
A sample of 1.00 mol of oxygen at 50 ◦ C and 98.6 kPa occupies what volume?
Solution:
We solve the ideal gas equation for the volume
nRT
V =
p
and plug in the values n = 1, T = 273.15 + 50 K = 323.15 K and p = 98.6·10 3 Pa,
yielding for the volume V = 0.0272 m3 = 27.2 dm3 .
This equation is often used to determine the molecular masses from gas data.
Worked Example 66
ideal gas 2
A liquid can be decomposed by electricity into two gases. In one experiment, one of
the gases was collected. The sample had a mass of 1.090 g, a volume of 850 ml, a
pressure of 746 torr, and a temperature of 25 ◦ C. Calculate its molecular mass.
Solution:
To calculate the molecular mass we need the number of grams and the number of
mols. We can get the number of grams directly from the information in the question.
We can calculate the mols from the rest of the information and the ideal gas equation.
202
V = 850mL = 0.850L = 0.850dm3
P = 746torr/760torr = 0.982atm
T = 25.0◦ C + 273.15 = 298.15K
pV = nRT
(0.982atm)(0.850L) = (n)(0.0821Latmmol − 1K − 1)(298.15K)
n = 0.0341mol
molecular mass = g/mol = 1.090 g/ 0.0341 mol = 31.96 g/mol. The gas is oxygen.
Or the equation can be comfortably used to design a gas temperature controller:
Worked Example 67
ideal gas 3
In a gas thermometer, the pressure needed to fix the volume of 0.20 g of Helium at
0.50 L is 113.3 kPa. What is the temperature?
Solution:
We transform first need to find the number of mols for Helium. Helium consists of 2
protons and 2 neutrons in the core (see later) and therefore has a molar volume of 4
g/mol. Therefore, we find
n = 0.20g/4g/mol = 0.05mol
plugging this into the ideal gas equation and solving for the temperature T we find:
pV 113.3 · 103 P a · 0.5 · 10−3 m3

T = = = 136.3K
nR 0.05mol · 8.314J/molK
The temperature is 136 Kelvin.
12.4.2 Kinetic theory of gasses

The results of several experiments can lead to a scientific law, which describes then all experi-
ments performed. This is an empirical, that is based on experience only, approach to Physics.
A law, however, only describes results; it does not explain why they have been obtained. Signif-
icantly stronger, a theory is a formulation which explains the results of experiments. A theory
usually bases on postulates, that is a proposition that is accepted as true in order to provide a
basis for logical reasoning. The most famous postulate in Physics is probably the one formulated
by Walter Nernst which states that if one could reach absolute zero, all bodies would have the
same entropy.
203
The kinetic-molecular theory of gases is a theory of great explanatory power. We shall see
how it explains the ideal gas law, which includes the laws of Boyle and of Charles; Dalton’s law
of partial pressures; and the law of combining volumes.
The kinetic-molecular theory of gases can be stated as four postulates:
• A gas consists of particles (atoms or molecules) in continuous, random motion.
• Gas molecules influence each other only by collision; they exert no other forces on each
other.
• All collisions between gas molecules are perfectly elastic; all kinetic energy is conserved.
• The average energy of translational motion of a gas particle is directly proportional to

temperature.
In addition to the postulates above, it is assumed that the volumes of the particles are
negligible as compared to container volume.
These postulates, which correspond to a physical model of a gas much like a group of billiard
balls moving around on a billiard table, describe the behavior of an ideal gas. At room temper-
atures and pressures at or below normal atmospheric pressure, real gases seem to be accurately
described by these postulates, and the consequences of this model correspond to the empirical
gas laws in a quantitative way.
We define the average kinetic energy of translation Et of a particle in a gas as
Et = 1/2 · mv 2 (12.2)
where m is the mass of the particle with average velocity v. The forth postulate states that
the average kinetic energy is a constant defining the temperature, i.e. we can formulate
Et = 1/2 · mv 2 = c · T (12.3)
where the temperature T is given in Kelvin and c is a constant, which has the same value for
all gases. As we have 3 different directions of motion and each possible movement gives k B T , we
find for the energy of a particle in a gas as
R
Et = 1/2 · mv 2 = 3/2kB T = 3/2 T (12.4)
NA
Hence, we can find an individual gas particle’s speed rms = root mean square, which is the
average square root of the speed of the individual particles (find u)
r
3RT
vrms = (12.5)
Mmol
where Mmol is the molar mass, i.e. the mass of the particle m times the Avogadro number
NA .
Worked Example 68
kinetic theory 1
204
Calculate the root-mean-square velocity of oxygen molecules at room temperature,
25 ◦ C.
Solution:
Using
p
vrms = 3RT /Mmol ,
the molar mass of molecular oxygen is 31.9998 g/mol; the molar gas constant has
the value 8.3143 J/mol K, and the temperature is 298.15 K. Since the joule is the
kg·m2 ·s−2 , the molar mass must be expressed as 0.0319998 kg/mol. The root-mean-
square velocity is then given by:
p
vrms = 3(8.3143)(298.15)/(0.0319998) = 482.1m/s
A speed of 482.1 m/s is 1726 km/h, much faster than a jetliner can fly and faster
than most rifle bullets.
The very high speed of gas molecules under normal room conditions would indicate that a
gas molecule would travel across a room almost instantly. In fact, gas molecules do not do so.
If a small sample of the very odorous (and poisonous!) gas hydrogen sulfide is released in one
corner of a room, our noses will not detect it in another corner of the room for several minutes
unless the air is vigorously stirred by a mechanical fan. The slow diffusion of gas molecules which
are moving very quickly occurs because the gas molecules travel only short distances in straight
lines before they are deflected in a new direction by collision with other gas molecules.
The distance any single molecule travels between collisions will vary from very short to very
long distances, but the average distance that a molecule travels between collisions in a gas can
be calculated. This distance is called the mean free path l of the gas molecules. If the root-
mean-square velocity is divided by the mean free path of the gas molecules, the result will be
the number of collisions one molecule undergoes per second. This number is called the collision
frequency Z1 of the gas molecules.
The postulates of the kinetic-molecular theory of gases permit the calculation of the mean
free path of gas molecules. The gas molecules are visualized as small hard spheres. A sphere
of diameter d sweeps through a cylinder of cross-sectional area π · (d/2)2 and length vrms each
second, colliding with all molecules in the cylinder.
The radius of the end of the cylinder is d because two molecules will collide if their diameters
overlap at all. This description of collisions with stationary gas molecules is not quite accurate,
however, because the gas molecules are all moving relative to each other. Those relative velocities
range between zero for two molecules moving in the same direction and 2v rms for a √ head-on
collision. The average relative velocity is that of a collision at right angles, which is 2vrms .
The total number of collisions per second per unit volume, Z1 , is
√
Z1 = πd2 2vrms (12.6)
This total number of collisions must now be divided by the number of molecules which are
present per unit volume. The number of gas molecules present per unit volume is found by
rearrangement of the ideal gas law to n/V = p/RT and use of Avogadro’s number, n = N/N A ;
thus N/V = pNA /RT . This gives the mean free path of the gas molecules, l, as
√
(urms /Z1 )/(N/V ) = l = RT /πd2 pNA 2 (12.7)
205
According to this expression, the mean free path of the molecules should get longer as the
temperature increases; as the pressure decreases; and as the size of the molecules decreases.
Worked Example 69
mean free path
Calculate the length of the mean free path of oxygen molecules at room temperature,
25 ◦ C, taking the molecular diameter of an oxygen molecule as 370 pm.
Solution:
Using the formula for mean free path given above and the value of the root-mean-
square velocity urms ,
(8.3143kgm2 s−2 /Kmol)(298.15K)

l= √ ,
π(370 · 10−12 m)2(101325kg/ms2 )(6.0225· 1023 mol−1 ) 2
so l = 6.7·10−8 m = 67 nm.
The apparently slow diffusion of gas molecules takes place because the molecules travel only
a very short distance before colliding. At room temperature and atmospheric pressure, oxygen
molecules travel only (6.7·10−8 m)/(370·10−12 m) = 180 molecular diameters between collisions.
The same thing can be pointed out using the collision frequency for a single molecule Z 1 , which
is the root-mean-square velocity divided by the mean free path:
√
πd2 pNA 2
Z1 = = vrms /l (12.8)
/RT
For oxygen at room temperature, each gas molecule collides with another every 0.13 nanosec-
onds (one nanosecond is 1.0·10−9 s), since the collision frequency is 7.2·10+9 collisions per second
per molecule.
For an ideal gas, the number of molecules per unit volume is given using pV = nRT and n
= N/NA as
N/V = NA p/RT (12.9)

which for oxygen at 25 ◦ C would be (6.022·1023 mol−1 )(101325 kg/m s2 ) / (8.3143 kg m2 /s2
K mol)(298.15 K) or 2.46·1025 molecules/m3 . The number of collisions between two molecules
in a volume, Z11 , would then be the product of the number of collisions each molecule makes
times the number of molecules there are, Z1 N/V , except that this would count each collision
twice (since two molecules are involved in each one collision). The correct equation must be
√
πd2 p2 NA2 2vrms
Z11 = (12.10)
2R2 T 2
If the molecules present in the gas had different masses they would also have different speeds,
so an average value of vrms would be using a weighted average of the molar masses; the partial
pressures of the different gases in the mixture would also be required. Although such calculations
involve no new principles, they are beyond our scope.
206
12.4.3 Pressure of a gas
In the kinetic-molecular theory of gases, pressure is the force exerted against the wall of a
container by the continual collision of molecules against it. From Newton’s second law of motion,
the force exerted on a wall by a single gas molecule of mass m and velocity v colliding with it is:
∆v
F =m·a=m (12.11)
∆t
In the above equation, the change in a quantity is indicated by the symbol ∆, that means by
changing the time t by a fraction, we change the velocity v by some other minimal amount. It is
assumed that the molecule rebounds elastically and no kinetic energy is lost in a perpendicular
collision, so ∆v = v - (-v) = 2v (see figure below). If the molecule is moving perpendicular to
the wall it will strike the opposite parallel wall, rebound, and return to strike the original wall
again. If the length of the container or distance between the two walls is the path length l, then
the time between two successive collisions on the same wall is ∆t = 2l/v. The continuous force
which the molecule moving perpendicular to the wall exerts is therefore
Figure 12.9: Change in momentum as a particle hits a wall.
2v mv 2
F =m = (12.12)
2l/v l
The molecules in a sample of gas are not, of course, all moving perpendicularly to a wall,
but the components of their actual movement can be considered to be along the three mutually
perpendicular x, y, and z axes. If the number of molecules moving randomly, N, is large, then on
the average one-third of them can be considered as exerting their force along each of the three
perpendicular axes. The square of the average velocity along each axis, v 2 (x), v 2 (y), or v 2 (z),
will be one-third of the square of the average total velocity v 2 :
v 2 (x) = v 2 (y) = v 2 (z) = v 2 /3 (12.13)

The average or mean of the square of the total velocity can replace the square of the perpen-
dicular velocity, and so for a large number of molecules N ,
mv 2
F = (N/3) (12.14)
l
Since pressure is force per unit area, and the area of one side of a cubic container must be l 2 ,
the pressure p will be given by F/l 2 as:
207
mv 2
p = (N/3) (12.15)
l3
This equation rearranges to
pV = N · mv 2 /3 (12.16)
because volume V is the cube of the length l. The form of the ideal gas law given above
shows the pressure-volume product is directly proportional to the mean-square velocity of the
gas molecules. If the velocity of the molecules is a function only of the temperature, and we
shall see in the next section that this is so, the kinetic-molecular theory gives a quantitative
explanation of Boyle’s law.
Worked Example 70
gas pressure
A square box contains He (Helium) at 25 ◦ C. If the atoms are colliding with the walls
perpendicularly (at 90◦ ) at the rate of 4.0 · 1022 times per second, calculate the force
(in Newtons) and the pressure exerted on the wall per mol of He given that the area
of the wall is 100 cm2 and the speed of the atoms is 600 ms−1 .
Solution:
We use the equation 12.14 to calculate the force.
mv 2 v
F = (N/3) = (N/3)mv
l l
The fraction v/l is the collision frequency Z1 = 0.6679 s−1 . The product of N · Z1
is the number of molecules impinging on the wall per second. This induces for the
force:
0.004g/mol
F = (N/3)mvτ = 6.022 · 1023/3 · · 600m/s · 0.6679s−1
6.022 · 1023
yielding for the force F = 0.534 N. The pressure is the force per area:
p = F/A = 0.534N/0.01m2 = 53.4P a.

The calculated force is 0.534 N and the resulting pressure is 53.4 Pa.
12.4.4 Kinetic energy of molecules

In the following, we will make the connection between the kinetic theory and the ideal gas laws.
We will find that the temperature is an important quantity which is the only intrinsic parameter
entering in the kinetic energy of a gas.
We will consider an ensemble of molecules in a gas, where the molecules will be regarded as
rigid large particles. We therefore neglect any vibrations or rotations in the molecule. Hence,
making this assumption, Physics for a molecular gas is the same as for a single atom gas.
208
The square of the velocity is sometimes difficult to conceive, but an alternative statement
can be given in terms of kinetic energy. The kinetic energy Ek of a single particle of mass m
moving at velocity v is mv 2 /2. For a large number of molecules N , the total kinetic energy Ek
will depend on the mean-square velocity in the same way:
Ek = N · mv 2 /2 = n · M v 2 /2 (12.17)
The second form is on a molar basis, since n = N/NA and the molar mass M = mNA where
NA is Avogadro’s number 6.022·1023 . The ideal gas law then appears in the form:
pV = 2Ek /3 (12.18)
2
Compare pV = nM v /2. This statement that the pressure-volume product of an ideal gas
is directly proportional to the total kinetic energy of the gas is also a statement of Boyle’s law,
since the total kinetic energy of an ideal gas depends only upon the temperature.
Comparison of the ideal gas law, pV = nRT , with the kinetic-molecular theory expression
pV = 2Ek /3 derived in the previous section shows that the total kinetic energy of a collection of
gas molecules is directly proportional to the absolute temperature of the gas. Equating the pV
term of both equations gives
Ek = 3/2nRT , (12.19)
which rearranges to an explicit expression for temperature,
2 Ek M v2
T = = (12.20)
3R n 3R
We see that temperature is a function only of the mean kinetic energy Ek , the mean molecular
velocity v, and the mean molar mass M .
Worked Example 71
mean velocity 1
Calculate the kinetic energy of 1 mol of nitrogen molecules at 300 K?

Solution:
Assume nitrogen behaves as an ideal gas, then
Ek = 3/2 · RT = (3/2)8.3145J/(molK) · 300K = 3742J/mol(or3.74kJ/mol)

At 300 K, any gas that behaves like an ideal gas has the same energy per mol.
As the absolute temperature decreases, the kinetic energy must decrease and thus the mean
velocity of the molecules must decrease also. At T = 0, the absolute zero of temperature, all
motion of gas molecules would cease and the pressure would then also be zero. No molecules
would be moving. Experimentally, the absolute zero of temperature has never been attained,
although modern experiments have extended to temperatures as low as 1 µK.
However, at low temperatures, the interactions between the particles becomes important and
we enter a new regime of Quantum Mechanics, which considers molecules, single atoms or protons
and electrons simultaneously as waves and as rigid particles. However, this would go too far.
209
Worked Example 72
mean velocity 2
If the translational rms. speed of the water vapor molecules (H2 O) in air is 648 m/s,
what is the translational rms speed of the carbon dioxide molecules (CO 2 ) in the
same air? Both gases are at the same temperature. And what is the temperature we
measure?
Solution:
The molar mass of H2 O is
MH2 O = 2 · 1g/mol + 1 · 16g/mol = 18g/mol

As the temperature is constant we can write
M v2 0.018kg/mol · (648m/s)2
T = = = 303.0K = 29.9◦ C
3R 3 · 8.314J/mol · K
Now we calculate the molar mass of CO2
MCO2 = 2 · 16g/mol + 1 · 12g/mol = 44g/mol

The rms velocity is again calculated with eq. 12.20
s s
R·T 3 · 8.314J/molK · 303.0K
vCO2 = 3 = = 414.5m/s
MCO2 0.044kg/mol
The experiment was performed at 29.9 ◦ C and the speed of the CO2 -molecules is
414.5 m/s, that is much slower than the water molecules as they are much heavier.
12.5 Temperature
Let us look back to the equation for the temperature of an ideal gas,
2 Ek
T = (12.21)
3R n
We can see that temperature is proportional to the average kinetic energy of a molecule in the
gas. In other words temperature is a measure of how much energy is contained in an object –
in hot things the atoms have a lot of kinetic energy, in cold things they have less. It may be
surprising that ‘hot’ and ‘cold’ are really just words for how fast molecules or atoms are moving
around, but it is true.
Definition: Temperature is a measure of the average kinetic energy of the particles

in a body.
It should now be clear that heat is nothing more than energy on the move. It can be carried
210
ice
water
Figure 12.10: A heat flow diagram showing the heat flowing from the warmer water into the
cooler ice cube.
by atoms, molecules or electromagnetic radiation but it is always just transport of energy. This
is very important when we describe movement of heat as we will do in the following sections.
‘Cold’ is not a physical thing. It does not move from place to place, it is just the word for a lack
of heat, just like dark is the word for an absence of light.
12.5.1 Thermal equilibrium

Now that we have defined the temperature of an isolated object (usually referred to as a body)
we need to consider how heat will move between bodies at different temperatures. Let us take
two bodies; A which has a fixed temperature and B whose temperature is allowed to change. If
we allow heat to move between the two bodies we say they are in thermal contact.
First let us consider what happens if B is cooler than A. Remember – we have fixed the
temperture of A so we need only worry about the temperature of B changing. An example of
such a situation is an ice cube being dropped into a large pan of boiling water on a fire. The
water temperature is fixed i.e. does not change, because the fire keeps it constant. It should be
obvious that the ice cube will heat up and melt. In physical terms we say that the heat is flowing
out of the (warmer) boiling water, into the (cooler) ice cube. This flow of heat into the ice cube
causes it to warm up and melt. In fact the temperature of any cooler object in thermal contact
with a warmer one will increase as heat from the warmer object flows into it.
The reverse would be true if B were warmer than A. We can now picture putting a small
amount of warm water in to a freezer. If we come back in an hour or so the water will have
cooled down and possibly frozen. In physical terms we say that the heat is flowing out of the
(warmer) water, into the (cooler) air in the freezer. This flow of heat out of the ice cube in to
the aircauses it to cool down and (eventually) freeze. Again, any warm object in thermal contact
with a cooler one will cool down due to heat flowing out of it.
There is one special case which we have not yet discussed – what happens if A and B are at the
same temperature? In this case B will neither warm up nor cool down, in fact, its temperature
will remain constant. When two bodies are at the same temperature we say that they are in
thermal equilibrium. Another way to express this is to say that two bodies are in thermal equi-
librium if the particles within those bodies have the same average kinetic energies.
211
water
air
Figure 12.11: A heat flow diagram showing the heat flowing from the warmer water into the
cooler air in the fridge.
Convince yourself that the last three paragraghs are correct before you continue. You should
notice that heat always flows from the warmer object to the cooler object, never the other way
around. Also, we never talk about coldness moving as it is not a real physical thing, only a lack of
heat. Most importantly, it should be clear that the flow of heat between the two objects always
attempts to bring them to the same temperature (or in other words, into thermal equilibrium).
The logical conclusion of all this is that if two bodies are in thermal contact heat will flow from
the hotter object to the cooler one until they are in thermal equilibrium (i.e. at the same tem-
perature). We will see how to deal with this if the temperature of object A is not fixed in the
section on heat capacities.
12.5.2 Temperature scales

Temperature scales are often confusing and even university level students can be tricked into
using the wrong one. For most purposes in physics we do not use the familiar celcius (often
innaccurately called centigrade) scale but the closely related absolute (or kelvin) scale – why?
Let us think about the celcius scale now that we have defined temperature as a measure of the
average kinteic energy of the atoms or molecules in a body.
A scale is a way of assigning a number to a physical quantity. Consider distance – using a ruler
we can measure a distance and find its legnth. This legnth could be measured in metres, inches,
or miles. The same is true of temperatures in that many different scales exist to measure them.
Table 12.3 shows a few of these scales. Just like a ruler the scales have two defined points which
fix the scale (consider the values at the beginning and end of the ruler e.g. 0cm and 15cm). This
is usually achieved by defining the temperature of some physical process, e.g. the freezing point
of water.
Armed with our knowledge of temperture we can see that Celcius’s scale has a big problem – it
allows us to have a negative temperature.
212
Scale Symbol Definition
◦
Fahrenheit F Temperature at which an equal mixture of ice and salt melts = 0◦ F
Temperature of blood = 96◦ F
◦
Celcius C Temperature at which water freezes = 0◦ C
Temperature at which water boils = 100◦ C
Kelvin K Absolute zero is 0 K

Triple point of water is 273.16 K
Table 12.3: The most important temperature scales.
We found that temperature is a measure of the average kinetic energy of the particles in a body.
Therefore, a negative temperature suggests that that the particles have negative kinetic energy.
This can not be true as kinetic energy can only be positive. Kelvin addressed this problem
by redefining the zero of the scale. He realised that the coldest temperature you could achieve
would be when the particles in a body were not moving at all. There is no way to cool something
further than this as there is no more kinetic energy to remove from the body. This temperature
is called absolute zero. Kelvin chose his scale so that 0K was the same as absolute zero and chose
the size of his degree to be the same as one degree in the celcius scale.
Interesting Rankine did a similar thing to Kelvin but set his degree to be the same size as one degree
Fact: fahrenheit. Unfortunately for him, almost everyone preferred Kelvin’s absolute scale and
the rankine scale is now hardly ever used!
It turns out that the freezing point of water, 0◦ C, is equal to 273.15 K. So, in order to convert
from celcius to kelvin need to subtact 273.15.
Definition: T (K) = T (◦ C) − 273.15
12.5.3 Practical thermometers

It is often important to be able to determine an object’s temperature precisely. This can be
a challenge at very high or low tempertures or in inaccesible places. Consider a scientist who
wishes to know how hot the magma in a volcano is. They are not going to be able to just lower
a thermometer in to the magma as it will just melt as it reaches the superheated rock.
We will now look at some less extreme situations and show how a variety of thermometry tech-
niques can be developed. Consider first the gas cylinder which we tried to explode in worked
example 7 by heating it while sealed. We decided that we would need to heat it to around 3000K
before it explodes. How can we check this experimentally? In a sealed gas cylinder the volume of
the gas and the number of moles of gas remain constant as we heat, this is why we could use the
Gay-Lussac law in example 7. The Gay-Lussac law tells us that pressure is directly proportional
213
to temperature for fixed volume and amount of gas. Therefore by mesuring the pressure in the
cylinder (which can be done by fitting a pressure gauge to the top of it) we can indirectly work
out the temperature.
This is similar to familiar alcohol or mercury thermometers. In these we use the fact that ex-
pansion of a liquid as it is heated is approximately proportional to temperature so we can use
this expansion to as a measure of temperature. In fact, any thermometer you can imagine uses
some physical property which varies with temperature to measure it indirectly.
12.5.4 Specific heat capacity

Conversion of macroscopic energy to microscopic kinetic energy thus tends to raise the temper-
ature, while the reverse conversion lowers it. It is easy to show experimentally that the amount
of heating needed to change the temperature of a body by some amount is proportional to the
amount of matter in the body. Thus, it is natural to write
∆Q = M C∆T
(23.4)
where M is the mass of material, ∆Q is the amount of energy transferred to the material,
and ∆T is the change of the material’s temperature. The quantity C is called the specific heat
of the material in question and is the amount of energy needed to raise the temperature of a
unit mass of material one degree in temperature. C varies with the type of material. Values for
common materials are given in table 22.2.
Table 22.2: Specific heats of common materials. Material C (J kg−1 K−1 ) brass 385 glass
669 ice 2092 steel 448 methyl alcohol 2510 glycerine 2427 water 4184
12.5.5 Specific latent heat

It can be seen that the specific heat as defined above will be infinitely large for a phase change,
where heat is transferred without any change in temperature. Thus, it is much more useful to
define a quantity called latent heat, which is the amount of energy required to change the phase
of a unit mass of a substance at the phase change temperature.
12.5.6 Internal energy

In thermodynamics, the internal energy is the energy of a system due to its temperature. The
statement of first law refers to thermodynamic cycles. Using the concept of internal energy it
is possible to state the first law for a non-cyclic process. Since the first law is another way of
stating the conservation of energy, the energy of the system is the sum of the heat and work
input, i.e., E = Q + W. Here E represents the heat energy of the system along with the kinetic
energy and the potential energy (E = U + K.E. + P.E.) and is called the total internal energy
of the system. This is the statement of the first law for non-cyclic processes.
For gases, the value of K.E. and P.E. is quite small, so the important internal energy function
is U. In particular, since for an ideal gas the state can be specified using two variables, the
state variable u is given by , where v is the specific volume and t is the temperature. Thus, by
definition, , where cv is the specific heat at constant volume.
214
Internal energy of an Ideal gas
In the previous section, the internal energy of an ideal gas was shown to be a function of both
the volume and temperature. Joule performed an experiment where a gas at high pressure inside
a bath at the same temperature was allowed to expand into a larger volume.
picture required
In the above image, two vessels, labeled A and B, are immersed in an insulated tank containing
water. A thermometer is used to measure the temperature of the water in the tank. The two
vessels A and B are connected by a tube, the flow through which is controlled by a stop. Initially,
A contains gas at high pressure, while B is nearly empty. The stop is removed so that the vessels
are connected and the final temperature of the bath is noted.
The temperature of the bath was unchanged at the and of the process, showing that the
internal energy of an ideal gas was the function of temperature alone. Thus Joule’s law is stated
as = 0.
12.5.7 First law of thermodynamics

We now address some questions of terminology. The use of the terms “heat” and “quantity of
heat” to indicate the amount of microscopic kinetic energy inhabiting a body has long been out
of favor due to their association with the discredited “caloric” theory of heat. Instead, we use the
term internal energy to describe the amount of microscopic energy in a body. The word heat is
most correctly used only as a verb, e. g., “to heat the house”. Heat thus represents the transfer of
internal energy from one body to another or conversion of some other form of energy to internal
energy. Taking into account these definitions, we can express the idea of energy conservation in
some material body by the equation
∆E = ∆Q − ∆W (first law of thermodynamics)

where ∆E is the change in internal energy resulting from the addition of heat ∆Q to the
body and the work ∆W done by the body on the outside world. This equation expresses the first
law of thermodynamics. Note that the sign conventions are inconsistent as to the direction of
energy flow. However, these conventions result from thinking about heat engines, i. e., machines
which take in heat and put out macroscopic work. Examples of heat engines are steam engines,
coal and nuclear power plants, the engine in your automobile, and the engines on jet aircraft.
Units
or
Table 12.4: Units used in Electricity and Magnetism
215
Chapter 13
Electrostatics
13.1 What is Electrostatics?

Electrostatics is the study of electric charge which is not moving i.e. is static.
13.2 Charge
All objects surrounding us (including people!) contain large amounts of electric charge. Charge
can be negative or positive and is measured in units called coulombs (C). Usually, objects
contain the same amount of positive and negative charge so its effect is not noticeable and the
object is called electrically neutral. However, if a small imbalance is created (i.e. there is a
little bit more of one type of charge than the other on the object) then the object is said to be
electrically charged.
Some rather amusing examples of what happens when a person becomes charged are for
example when you charge your hair by combing it with a plastic comb and it stands right up
on end! Another example is when you walk fast over a nylon carpet and then touch a metal
doorknob and give yourself a small shock (alternatively you can touch your friend and shock
them!)
Charge has 3 further important properties:
• Charge is always conserved. Charge, just like energy, cannot be created or destroyed.
• Charge comes in discrete packets. The smallest unit of charge is that carried by one
electron called the elementary charge, e, and by convention, it has a negative sign
(e = −1.6 × 10−19 C).
• Charged objects exert electrostatic forces on each other. Like charges repel and unlike
charges attract each other.
Interesting The word ‘electron’ comes from the Greek word for amber! The ancient Greeks observed
Fact: that if you rubbed a piece of amber, you could use it to pick up bits of straw. (Attractive
electrostatic force!)
216
You can easily test the fact that like charges repel and unlike charges attract by doing a very
simple experiment. Take a glass rod and rub it with a piece of silk, then hang it from its middle
with a piece string so that it is free to move. If you then bring another glass rod which you have
also charged in the same way next to it, you will see the rod on the string turn away from the
rod in your hand i.e. it is repelled. If, however, you take a plastic rod, rub it with a piece of fur
and then bring it close to the rod on the string, you will see the rod on the string turn towards
the rod in your hand i.e. it is attracted!
////////// //////////
F F
+ + + +
+ + + +
+ + + +
F + F -
+ - -
+ + - -
+ -
+ -
What actually happens is that when you rub the glass with silk, tiny amounts of negative
charge are transferred from the glass onto the silk, which causes the glass to have less negative
charge than positive charge, making it positively charged. When you rub the plastic rod with
the fur, you transfer tiny amounts of negative charge onto the rod and so it has more negative
charge than positive charge on it, making it negatively charged.
Conductors and Insulators

Some materials allow charge carriers to move relatively freely through them (e.g. most metals,
tap water, the human body) and these materials are called conductors. Other materials, which
do not allow the charge carriers to move through them (e.g. plastic, glass), are called non-
conductors or insulators.
Aside: As mentioned above, the basic unit of charge, namely the elementary
charge, e, is carried by the electron. In a conducting material (e.g. copper),
when the atoms bond to form the material, some of the outermost, loosely bound
electrons become detached from the individual atoms and so become free to move
around. The charge carried by these electrons can move around in the material!
In insulators, there are very few, if any, free electrons and so the charge cannot
move around in the material.
217
If an excess of charge is put onto an insulator, it will stay where it is put and there will be a
concentration of charge in that area on the object. However, if an excess of charge is put onto a
conductor, the charges of like sign will repel each other and spread out over the surface of the
object. When two conductors are made to touch, the total charge on them is shared between the
two. If the two conductors are identical, then each conductor will be left with half of the total
charge.
13.3 Electrostatic Force

As we now know, charged objects exert a force on one another. If the charges are at rest then
this force between them is known as the electrostatic force. An interesting characteristic of
the electrostatic force is that it can be either attractive or repulsive, unlike the gravitational
force which is only ever attractive. The relative charges on the two objects is what determines
whether the force between the charged objects is attractive or repulsive. If the objects have
opposite charges they attract each other, while if their charges are similar they repel each other
(e.g. two metal balls which are negatively charged will repel each other, while a positively charged
ball and negatively charged ball will attract one another).
F F
- -
F F
- +
It is this force that determines the arrangement of charge on the surface of conductors. When
we place a charge on a spherical conductor the repulsive forces between the individual like charges
cause them to spread uniformly over the surface of the sphere. However, for conductors with
non-regular shape there is a concentration of charge near the point or points of the object.
+ - -
++ ++ - -
+ + - --
+ + --- -
+ + - --
++ ++ - -
+ - -
This collection of charge can actually allow charge to leak off the conductor if the point is sharp
enough. It is for this reason that buildings often have a lightning rod on the roof to remove any
charge the building has collected. This minimises the possibility of the building being struck by
lightning.
This “spreading out” of charge would not occur if we were to place the charge on an insulator
since charge cannot move in insulators.
13.3.1 Coulomb’s Law

The behaviour of the electrostatic force was studied in detail by Charles Coulomb around 1784.
Through his observations he was able to show that the electrostatic force between two point-like
218
charges is inversely proportional to the square of the distance between the objects. He also
discovered that the force is proportional to the product of the charges on the two objects.
Q1 Q2
F ∝ ,
r2
where Q1 is the charge on the one point-like object, Q2 is the charge on the second, and r is the
distance between the two.
The magnitude of the electrostatic force between two point-like charges is given by Coulomb’s
Law:
Q1 Q2
F =k 2 (13.1)
r
and the proportionality constant k is called the electrostatic constant. We will use the value
k = 8.99 × 109 N · m2 /C2 .
The value of the electrostatic constant is known to a very high precision (9 decimal places). Not
many physical constants are known to as high a degree of accuracy as k.
Aside: Notice how similar Coulomb’s Law is to the form of Newton’s Universal
Law of Gravitation between two point-like particles:
m1 m2
FG = G ,
r2
where m1 and m2 are the masses of the two particles, r is the distance between
them, and G is the gravitational constant. It is very interesting that Coulomb’s
Law has been shown to be correct no matter how small the distance, nor how large
the charge: for example it still applies inside the atom (over distances smaller than
10−10 m).
Let’s run through a simple example of electrostatic forces.
Worked Example 73
Coulomb’s Law I
Question: Two point-like charges carrying charges of +3 × 10−9 C and −5 × 10−9 C

are 2m apart. Determine the magnitude of the force between them and state whether
it is attractive or repulsive. Answer:
First draw the situation:
+3 × 10−9 C −5 × 10−9 C
· ·
2m
Is everything in the correct units? Yes, charges are in coulombs [C] and distances in
meters [m].
219
Determine the magnitude of the force: Using Coulomb’s Law we have
Q1 Q2
F = k
r2
(+3 × 10−9 C)(−5 × 10−9 C)
= (8.99 × 109 N · m2 /C2 )
(2m)2
= −3.37 × 10−8 N
Thus the magnitude of the force is 3.37 × 10−8 N. The minus sign is a result of the
two point charges having opposite signs.
Is the force attractive or repulsive? Well, since the two charges are oppositely charged,
the force is attractive. We can also conclude this from the fact that Coulomb’s Law
gives a negative value for the force.
Next is another example that demonstrates the difference in magnitude between the gravita-
tional force and the electrostatic force.
Worked Example 74
Coulomb’s Law II
Question: Determine the electrostatic force and gravitational force between two
electrons 1Åapart (i.e. the forces felt inside an atom)
Answer:
Step 1 : (NOTE TO SELF:
−1.60 × 10step
−19 is deprecated, use westep instead.)
C −1.60 × 10−19 C
First draw the situation: e e
1Å
Get everything into S.I. units: The charge on an electron is −1.60 × 10−19 C, the mass
of an electron is 9.11 × 10−31 kg, and 1Å=1 × 10−10 m
Calculate the electrostatic force using Coulomb’s Law:
Q1 Q2 e·e
FE = k =k 2
r2 1Å
(−1.60 × 10−19 C)(−1.60 × 10−19 C)
= (8.99 × 109 N · m2 /C2 )
(10−10 m)2
= 2.30 × 10−8 N
Hence the magnitude of the electrostatic force between the electrons is 2.30 × 10 −8 N.
(Note that the electrons carry like charge and from this we know the force must be
repulsive. Another way to see this is that the force is positive and thus repulsive.)
220
Calculate the gravitational force:
m1 m2 me · m e
FE = G 2
=G
r (1Å)2
(9.11 × 10−31 C)(9.11 × 10−31 kg)
= (6.67 × 10−11 N · m2 /kg2 )
(10−10 m)2
= 5.54 × 10−51 N
The magnitude of the gravitational force between the electrons is 5.54 × 10 −51 N
Notice that the gravitational force between the electrons is much smaller than the electrostatic
force. For this reason, the gravitational force is usually neglected when determining the force
between two charged objects.
We mentioned above that charge placed on a spherical conductor spreads evenly along the
surface. As a result, if we are far enough from the charged sphere, electrostatically, it behaves
as a point-like charge. Thus we can treat spherical conductors (e.g. metallic balls) as point-like
charges, with all the charge acting at the centre.
Worked Example 75
Coulomb’s Law: Challenge Question
Question: In the picture below, X is a small negatively charged sphere with a mass
of 10kg. It is suspended from the roof by an insulating rope which makes an angle
of 60o with the roof. Y is a small positively charged sphere which has the same
magnitude of charge as X. Y is fixed to the wall by means of an insulating bracket.
Assuming the system is in equilibrium, what is the magnitude of the charge on X?
///////////
60o
\
10kg Y \
X – + \
\
\
50cm
Answer:
How are we going to determine the charge on X? Well, if we know the force between X
and Y we can use Coulomb’s Law to determine their charges as we know the distance
between them. So, firstly, we need to determine the magnitude of the electrostatic
force between X and Y.
Is everything in S.I. units? The distance between X and Y is 50cm = 0.5m, and the
mass of X is 10kg.
221
Draw the forces on X (with directions) and label.
T : tension from the thread
60o FE : electrostatic force

X
Fg : gravitational force

Determine the magnitude of the electrostatic force (FE ). Since nothing is moving
(system is in equlibrium) the vertical and horizonal components of the forces must
cancel. Thus
FE = T sin(60o ); Fg = T sin(60o ).
The only force we know is the gravitational force Fg = mg. Now we can calculate
the magnitude of T from above:
Fg (10kg)(10m/s2 )
T = o
= = 1155N.
sin(60 ) sin(60o )
Which means that FE is:
FE = T cos(60o ) = 1154N · cos(60o ) = 577.5N

Now that we know the magnitude of the electrostatic force between X and Y, we can
calculate their charges using Coulomb’s Law. Don’t forget that the magnitudes of the
charges on X and Y are the same: |QX | = |QY |. The magnitude of the electrostatic
force is
|QX QY | Q2
FE = k 2
= k 2X
r r r
FE r 2
|QX | =
k
s
(577.5N)(0.5m)2
=
8.99 × 109 N · m2 /C2
= 1.27 × 10−4 C
Thus the charge on X is −1.27 × 10−4 C
222
13.4 Electric Fields
We have learnt that objects that carry charge feel forces from all other charged objects. It is
useful to determine what the effect of a charge would be at every point surrounding it. To do
this we need some sort of reference.
We know that the force that one charge feels due to another depends on both charges (Q 1
and Q2 ). How then can we talk about forces if we only have one charge? The solution to this
dilemna is to introduce a test charge. We then determine the force that would be exerted on it
if we placed it at a certain location. If we do this for every point surrounding a charge we know
what would happen if we put a test charge at any location.
This map of what would happen at any point we call a field map. It is a map of the electric
field due to a charge. It tells us how large the force on a test charge would be and in what
direction the force would be.
Our map consists of the lines that tell us how the test charge would move if it were placed
there.
13.4.1 Test Charge

This is the key to mapping out an electric field. The equation for the force between two electric
charges has been shown earlier and is:
Q1 Q2
F =k . (13.2)
r2
If we want to map the field for Q1 then we need to know exactly what would happen if we put Q2
at every point around Q1 . But this obviously depends on the value of Q2 . This is a time when
we need to agree on a convention. What should Q2 be when we make the map? By convention
we choose Q2 = +1C.
This means that if we want to work out the effects on any other charge we only have to
multiply the result for the test charge by the magnitude of the new charge.
The electric field strength is then just the force per unit of charge and has the same magnitude
and direction as the force on our test charge but has different units:
Q1
E=k (13.3)
r2
The electric field is the force per unit of charge and hence has units of newtons per coulomb
[N/C].
So to get the force the electric field exerts we use:
F = EQ (13.4)
Notice we are just multiplying the electric field magnitude by the magnitude of the charge it is
acting on.
13.4.2 What do field maps look like?

The maps depend very much on the charge or charges that the map is being made for. We will
start off with the simplest possible case. Take a single positive charge with no other charges
around it. First, we will look at what effects it would have on a test charge at a number of
points.
223
Positive Charge Acting on Test Charge
At each point we calculate the force on a test charge, q, and represent this force by a vector.
+Q
We can see that at every point the positive test charge, q, would experience a force pushing it
away from the charge, Q. This is because both charges are positive and so they repel. Also
notice that at points further away the vectors are shorter. That is because the force is smaller if
you are further away.
If the charge were negative we would have the following result.
Negative Charge Acting on Test Charge
-Q
Notice that it is almost identical to the positive charge case. This is important – the arrows are
the same length because the magnitude of the charge is the same and so is the magnitude of the
test charge. Thus the magnitude of the force is the same. The arrows point in the opposite
direction because the charges now have opposite sign and so the test charge is attracted to the
charge.
Now, to make things simpler, we draw continuous lines showing the path that the test charge
would travel. This means we don’t have to work out the magnitude of the force at many different
points.
224
Electric Field Map due to a Positive Charge
+Q
Some important points to remember about electric fields:
• There is an electric field at every point in space surrounding a charge.
• Field lines are merely a representation – they are not real. When we draw them, we just
pick convenient places to indicate the field in space.
• Field lines always start at a right-angle (90o ) to the charged object causing the field.
• Field lines never cross!
13.4.3 Combined Charge Distributions

We look at the field of a positive charge and a negative charge placed next to each other. The
net resulting field would be the addition of the fields from each of the charges. To start off with
let us sketch the field maps for each of the charges as though it were in isolation.
Electric Field of Negative and Positive Charge in Isolation
+Q -Q
225
Notice that a test charge starting off directly between the two would be pushed away from
the positive charge and pulled towards the negative charge in a straight line. The path it would
follow would be a straight line between the charges.
+Q -Q
Now let’s consider a test charge starting off a bit higher than directly between the charges.
If it starts closer to the positive charge the force it feels from the positive charge is greater, but
the negative charge does attract it, so it would move away from the positive charge with a tiny
force attracting it towards the negative charge. As it gets further from the positive charge the
force from the negative and positive charges change and they are equal in magnitude at equal
distances from the charges. After that point the negative charge starts to exert a stronger force
on the test charge. This means that the test charge moves towards the negative charge with only
a small force away from the positive charge.
+Q -Q
Now we can fill in the other lines quite easily using the same ideas. The resulting field map
is:
+Q -Q
Two Like Charges I: The Positive Case

For the case of two positive charges things look a little different. We can’t just turn the arrows
around the way we did before. In this case the test charge is repelled by both charges. This tells
us that a test charge will never cross half way because the force of repulsion from both charges
will be equal in magnitude.
226
+Q +Q
The field directly between the charges cancels out in the middle. The force has equal magnitude
and opposite direction. Interesting things happen when we look at test charges that are not on
a line directly between the two.
+Q +Q
We know that a charge the same distance below the middle will experience a force along a
reflected line, because the problem is symmetric (i.e. if we flipped vertically it would look the
same). This is also true in the horizontal direction. So we use this fact to easily draw in the next
four lines.
+Q +Q
227
Working through a number of possible starting points for the test charge we can show the
electric field map to be:
+Q +Q
Two Like Charges II: The Negative Case

We can use the fact that the direction of the force is reversed for a test charge if you change the
sign of the charge that is influencing it. If we change to the case where both charges are negative
we get the following result:
-Q -Q
13.4.4 Parallel plates

One very important example of electric fields which is used extensively is the electric field between
two charged parallel plates. In this situation the electric field is constant. This is used for many
practical purposes and later we will explain how Millikan used it to measure the charge on the
electron.
228
Field Map for Oppositely Charged Parallel Plates
+ + + + + + + + +
- - - - - - - - -
This means that the force that a test charge would feel at any point between the plates would
be identical in magnitude and direction. The fields on the edges exhibit fringe effects, i.e. they
bulge outwards. This is because a test charge placed here would feel the effects of charges only
on one side (either left or right depending on which side it is placed). Test charges placed in
the middle experience the effects of charges on both sides so they balance the components in the
horizontal direction. This isn’t the case on the edges.
The Force on a Test Charge between Oppositely Charged Parallel Plates

+ + + + + + + + +
- - - - - - - - -
13.4.5 What about the Strength of the Electric Field?

When we started making field maps we drew arrows to indicate the strength of the field and
the direction. When we moved to lines you might have asked “Did we forget about the field
strength?”. We did not. Consider the case for a single positive charge again:
229
A m
mg
h
B
Figure 13.1: A mass under the influence of a gravitational field.
+Q
Notice that as you move further away from the charge the field lines become more spread out.
In field map diagrams the closer field lines are together the stronger the field. This brings us to
an interesting case. What is the electric field like if the object that is charged has an irregular
shape.
13.5 Electrical Potential

13.5.1 Work Done and Energy Transfer in a Field
When a charged particle moves in an electric field work is done and energy transfers take place.
This is exactly analogous to the case when a mass moves in a gravitational field such as that set
up by any massive object.
Work done by a field

Gravitational Case
A mass held at a height h above the ground has gravitational potential energy since, if
released, it will fall under the action of the gravitational field. Once released, in the absence of
friction, only the force of gravity acts on the mass and the mass accelerates in the direction of
the force (towards the earth’s centre). In this way, work is done by the field. When the mass
230
+ + + + + + +
A +Q
QE
s
B
- - - - - - -
Figure 13.2: A charged particle under the influence of an electric field.
falls a distance h (from point A to B), the work done is,
W = Fs
= mgh
Energy is
In falling, the mass loses gravitational potential energy and gains kinetic energy. The work done
conserved!
by the field is equal to the energy transferred,
W = Gain in Ek = Loss in Ep (a falling mass)
Electrical Case
A charge in an electric field has electrical potential energy since, if released, it will move
under the action of the electric field. When released, in the absence of friction, only the electric
force acts on the charge and the charge accelerates in the direction of the force (for positive
charges the force and acceleration are in the direction of the electric field, while negative charges
experience a force and acceleration in the opposite direction to the electric field.) Consider a
positive charge +Q placed in the uniform electric field between oppositely charged parallel plates.
The positive charge will be repelled by the positive plate and attracted by the negative plate (i.e.
it will move in the direction of the electric field lines). In this way, work is done by the field. In
moving the charge a distance s in the electric field, the work done is,
W = Fs
F
= QEs since E = .
Q
In the process of moving, the charge loses electrical potential energy and gains kinetic energy.
The work done by the field is equal to the energy transferred,
W = Gain in Ek = Loss in Ep (charge moving under the influence of an electric field)
Work done by us
Gravitational Case
In order to return the mass m in Fig.13.1 to its original position (i.e. lift it a distance h from B
back to A) we have to apply a force mg to balance the force of gravity. An amount of work mgh
is done by the lifter. In the process, the mass gains gravitational potential energy,
mgh = Gain in Ep (lifting a mass)
231
Electrical Case
In order to return the charge in Fig.13.2 to its original position (i.e. from B back to A) we have
to exert a force QE on the charge to balance the force exerted on it by the electric field. An
Energy is
amount of work QEs is done by us. In the process, the charge gains electrical potential energy,
conserved!
QEs = Gain in Ep (charge moved against an electric field)

In summary, when an object moves under the influence of a field, the field does work
and potential energy is transferred into kinetic energy. Potential energy is lost,
while kinetic energy is gained. When an object is moved against a field we have to
do work and the object gains potential energy.
Worked Example 76
Work done and energy transfers in a field
Question: A charge of +5nC is moved a distance of 4 cm against a uniform electric

field of magnitude 2 × 1012 N.C−1 from A to B.
+ + + + + + +
B
4cm
+5nC
A
- - - - - - -
(a) Calculate the work done in moving the charge from A to B.

(b) The charge is now released and returns to A. Calculate the kinetic energy of the
charge at A.
Answer:
(a)
We are given the values of the charge, the field and the distance the charge must
move. All are in the correct units.
Since the charge is positive we have to do work to move it from A to B (since this is
against the field). This work is given by,
W = QEs
= (5 × 10−9 )(2 × 1012 )(0.04)
= 400 J
(b)
232
When released the charge moves under the influence of the electric field and returns
to A. Work is now done by the field and the work done is equal to the kinetic energy
gained,
Gain in Ek = QEs
= (5 × 10−9 )(2 × 1012 )(0.04)
= 400 J
Since the charge started at rest, the gain in kinetic energy is the final kinetic energy,
Ekat A = 400 J
13.5.2 Electrical Potential Difference

Consider a positive test charge +Q placed at A in the electric field of another positive point
charge.
+Q
+
A B
The test charge moves towards B under the influence of the electric field of the other charge.
In the process the test charge loses electrical potential energy and gains kinetic energy. Thus, at
A, the test charge has more potential energy than at B – A is said to have a higher electrical
potential than B. The potential energy of a charge at a point in a field is defined as the work
required to move that charge from infinity to that point.
The potential difference between two points in an electric field is defined as the work
required to move a unit positive test charge from the point of lower potential to
that of higher potential. If an amount of work W is required to move a charge Q from one
point to another, then the potential difference between the two points is given by,
W
V = unit : J.C−1 or V (the volt)
Q
233
From this equation it follows that one volt is the potential difference between two points in an
electric field if one joule of work is done in moving one coulomb of charge from the one point to
the other.
Worked Example 77
Potential difference
Question:
A positively charged object Q is placed as shown in the sketch. The potential differ-
ence between two points A and B is 4 × 10−4 V.
+Q
A B
(a) Calculate the change in electrical potential energy of a +2nC charge when it
moves from A to B.
(b) Which point, A or B, is at the higher electrical potential? Explain.
(c) If this charge were replaced with another of charge -2nC, in what way would its
change in energy be affected?
Answer:
(a) The electrical potential energy of the positive charge decreases as it moves from
A to B since it is moving in the direction of the electric field produced by the object
Q. This loss in potential energy is equal to the work done by the field,
Loss in Electrical Potential Energy = W

W
= VQ (Since V = )
Q
= (4 × 10−4 )(2 × 10−9 )
= 8 × 10−13 J
(b) Point A is at the higher electrical potential since work is required by us to move
a positive test charge from B to A.
(c) If the charge is replaced by one of negative charge, the electrical potential energy
of the charge will increase in moving from A to B (in this case we would have to do
work on the charge).
As an example consider the electric field between two oppositely charged parallel plates a
distance d apart maintained at a potential difference V .
234
+ + + + + + +
P
O +Q
- - - - - - -
This electric field is uniform so that a charge placed anywhere between the plates will experience
the same force. Consider a positive test charge Q placed at point O just off the surface of the
negative plate. In order to move it towards the positive plate we have to apply a force QE. The
work done in moving the charge from the negative to the positive plate is,
W = Fs
= QEd,
but from the definition of electrical potential,
W = V Q.
Equating these two expressions for the work done,
QEd = V Q,
and so, rearranging,

V
E = .
d
Worked Example 78
Parallel plates
Question:
Two charged parallel plates are at a distance of 180 mm from each other. The po-
tential difference between them is 3600 V as shown in the diagram.
+ + + + + + +
X
d = 180mm V = 3 600V
Y
- - - - - - -
235
+ + + + + + +
Fup=QE
d -Q
Fdown=mg
- - - - - - -
Figure 13.3: An oil drop suspended between oppositely charged parallel plates.
(a) If a small oil drop of negligible mass, carrying a charge of +6.8 × 10−9 C, is
placed between the plates at point X, calculate the magnitude and direction of the
electrostatic force exerted on the droplet.
(b) If the droplet is now moved to point Y, would the force exerted on it be bigger,
smaller or the same as in (a)?
Answer:
(a)
First find the electric field strength between the plates,
V
E =
d
3600
=
0.180
= 20000 N.C−1 from the positive to the negative plate

Now the force exerted on the charge at X is,
F = QE
= (6.8 × 10−9 )(20000)
= 1.36 × 10−4 down
(b)
The same. Since the electric field strength is uniform, the force exerted on a charge
is the same at all points between the plates.
13.5.3 Millikan’s Oil-drop Experiment

Robert Millikan measured the charge on an electron by studying the motion of charged oil drops
between oppositely charged parallel plates. Consider one such negative drop between the plates
in Fig.13.3. Since this drop is negative, the electric field exerts an upward force on the drop. In
addition to this upward force, gravity exerts a downward force on the drop. Millikan adjusted
236
the electric field strength between the plates by varying the potential difference applied across
the plates. In this way, Millikan was able to bring the drops to rest. At equlibrum,
Fup = Fdown
QE = mg
V
Since E = d ,
V
Q = mg,
d
and, therefore,
mgd
Q =
V
Millikan found that all drops had charges which were multiples of 1.6 × 10 −19 C. Since objects
become charged by gaining or losing electrons, the charge on an electron must be −1.6×10 −19 C.
The magnitude of the electron’s charge is denoted by e,
e = 1.6 × 10−19 C
Worked Example 79
Charge
Question:
A metal sphere carries a charge of +3.2 × 10−8 C. How many electrons did it have
to lose to attain its charge?
Answer:
Since the sphere is positive it lost electrons in the process of charging (when an object
loses negative charges it is left positive). In fact, it lost,
3.2 × 10−8
= 2 × 1011 electrons
1.6 × 10−19
Worked Example 80
Millikan oil-drop experiment
Question:
In a Millikan-type experiment a positively charged oil drop is placed between two
horizontal plates, 20 mm apart, as shown.
237
- - - - - - -
+ + + + + + +
The potential difference across the plates is 4000V. The drop has a mass of 1.2 ×
10−14 kg and a charge of 8 × 10−19 C.
(a) Draw the electric field pattern between the two plates.
(b) Calculate:
1. the electric field intensity between the two plates.

2. the magnitude of the gravitational force acting on the drop.
3. the magnitude of the Coulomb force acting on the drop.
(c) The drop is observed through a microscope. What will the drop be seen to do?
Explain.
(d) Without any further calculations, give two methods that could be used to make
the drop remain in a fixed position.
Answer:
(a)
- - - - - - -
+ + + + + + +
(b) 1.
V
E =
d
4000
=
0.02
= 2 × 105 V.m−1 up
2.
Fgrav = mg
= (1.2 × 10−14 )(10)
= 1.2 × 10−13 N
238
3.
FCoulomb = QE
= (8 × 10−19 )(s × 105 )
= 1.6 × 10−13 N
(c) Since Fup > Fdown , the drop accelerates upwards.

(d) The Coulomb force can be decreased by decreasing the electric field strength be-
tween the plates. Since E = Vd , this can be done either by increasing d or decreasing
V.
Units
charge q or Q C (Coulomb) A.s or — —
→
− kg.m
force F N (Newton) s2 or kg.m.s−2 X
mass m — kg or — —
acceleration →
−a — m
or m.s−2 X
s2
radial distance r — m or — —
→
− kg.m
electric field E N/C or V /m A.s3 or kg.m.A−1 .s−3 X
kg.m2
work W J s2 or kg.m2 .s−2 —
kg.m2
potential difference V V (Volt) A.s3 or kg.m2 .A−1 .s−3 —
Table 13.1: Units used in Electrostatics
239
Chapter 14
Electricity
Warning: We believe in experimenting and learning

about physics at every opportunity, BUT playing with
electricity can be EXTREMELY DANGEROUS!
Do not try to build home made circuits without someone who knows
if what you are doing is safe. Normal electrical outlets
are dangerous. Treat electricity with respect in your everyday life.
You will encounter electricity everyday for the rest of your life and to make sure you are able to m
14.1 Flow of Charge

The normal motion of ”free” electrons in a conductor has no particular direction or speed.
However, electrons can be influenced to move in a coordinated fashion through a conductive
material. This motion of electrons is what we call electricity, or electric current. This is in
contrast to static electricity, which is an unmoving accumulation of electric charge. Just like
water flowing through the emptiness of a pipe, electrons are able to move between the atoms of
a conductor. The conductor may appear to be solid to our eyes, but any material composed of
atoms is mostly empty space! The liquid-flow analogy is so fitting that the motion of electrons
through a conductor is often referred to as a ”flow.”
As each electron moves through a conductor, it pushes on the one ahead of it. This push
of one electron on another makes all of the electrons move together as a group. The motion
of the each electron in a conductor may be very slow. However, the starting and stopping of
electron flow through a conductor is virtually instantaneous from one end of it to the other. As
an analogy consider a tube filled end-to-end with marbles:
Tube
Marble Marble
The tube is full of marbles, just as a conductor is full of free electrons. If a single marble
is suddenly inserted into this full tube on the left-hand side, another marble will immediately
try to exit the tube on the right. Even though each marble only traveled a short distance, the
240
transfer of motion through the tube is virtually instantaneous from the left end to the right end.
The nearly instantaneous transfer of motion through the tube occurs no matter how long the
tube is. With electricity, the overall effect from one end of a conductor to the other is effectively
instantaneous. Each individual electron, though, travels through the conductor at a much slower
pace.
If we want electrons to flow in a certain direction to a certain place, we must provide the
proper path for them to move. A path for electrons must be provided just as a plumber must
install piping to get water to flow where he or she wants it to flow. Wires made of highly
conductive metals such as copper or aluminum are used to form this path.
This means that there can be electric current only where there exists a continuous path of
conductive material (wire) providing a path for electrons. In the marble analogy, marbles can
flow into the left-hand side of the tube only if the tube is open on the right-hand side for marbles
to flow out. If the tube is blocked on the right-hand side, the marbles will just ”pile up” inside
the tube. Marble ”flow” will not occur if the tube is blocked. The same holds true for electric
current: the continuous flow of electrons requires there be an unbroken path. Let’s look at a
diagram to illustrate how this works:
A thin, solid line (as shown above) is the conventional symbol for a continuous piece of wire.
The wire is made of a conductive material, such as copper or aluminum. The wire’s constituent
atoms have many free electrons which can easily move through the wire. However, there will
never be a continuous flow of electrons within this wire unless they have a place to come from
and a place to go. Let’s add an hypothetical electron ”Source” and ”Destination:”
Electron Electron
Source Destination
Now, with the Electron Source pushing new electrons into the wire on the left-hand side,
electron flow through the wire can occur (as indicated by the arrows pointing from left to right).
However, the flow will be interrupted if the conductive path formed by the wire is broken:
Electron no flow! no flow! Electron

Source (break) Destination
Air is an insulator that impedes the flow of electrons. An air gap separates the two pieces of
wire, the path has now been broken, and electrons cannot flow from Source to Destination. This
is like cutting a water pipe in two and capping off the broken ends of the pipe: water can’t flow
if there’s no exit out of the pipe.
If we were to take another piece of wire leading to the Destination and connect it with the
wire leading to the Source, we would once again have a continuous path for electrons to flow.
The two dots in the diagram indicate physical (metal-to-metal) contact between the wire pieces:
Electron no flow! Electron

Source (break) Destination
241
Now, we have continuity from the Source, to the newly-made connection, down, to the right,
and up to the Destination. Please take note that the broken segment of wire on the right hand
side has no electrons flowing through it. This is because it is no longer part of a complete path
from Source to Destination.
It is interesting to note that no ”wear” occurs within wires due to this electric current. This is
in contrast to water-carrying pipes which are eventually corroded and worn by prolonged flows.
Electrons do encounter some degree of friction as they move and this friction can generate heat
in a conductor. This is a topic we’ll discuss later.
14.2 Circuits
In order for the Source-and-Destination scheme to work, both would have to have a huge reservoir
of electrons in order to sustain a continuous flow! Using the marble-and-tube analogy, the source
and destination buckets would have to be large reservoirs to contain enough marble capacity for
a ”flow” of marbles to be sustained.
The answer to this paradox is found in the concept of a circuit: a never-ending looped pathway
for electrons. If we take a wire, and loop it around so that it forms a continuous pathway, we
have the means to support a uniform flow of electrons without having to resort to huge reservoirs.
electrons can flow
in a path without A marble-and-

beginning or end, hula-hoop "circuit"
continuing forever!
Each electron advancing clockwise in this circuit pushes on the one in front of it, which pushes
on the one in front of it, and so on. A circuit is just like a hula-hoop filled with marbles. Now,
we have the capability of supporting a continuous flow of electrons indefinitely without the need
for reservoirs. All we need to maintain this flow is a continuous means of motivation for those
electrons. This topic will be addressed in the next section of this chapter.
It must be realized that continuity is just as important in a circuit as it is in a straight piece
of wire. Just as in the example with the straight piece of wire between the electron Source and
Destination, any break in this circuit will prevent electrons from flowing through it:
242
no flow!
continuous
electron flow cannot
occur anywhere
in a "broken" circuit!
(break) no flow!
no flow!
An important principle to realize here is that it doesn’t matter where the break occurs. Any
discontinuity in the circuit will prevent electron flow throughout the entire circuit.
no flow!
continuous
electron flow cannot
occur anywhere
in a "broken" circuit!
no flow! (break)
no flow!
A combination of batteries and conductors with other components is called an electric circuit
or circuit. The word circuit implies that you return to your starting point and this is an important
property of electric circuits. They must contain a closed loop before charge can flow.
The simplest possible circuit is a battery with a single conductor. Now how do we form a
closed loop with these two components? The battery has two terminals (connection points).
One is called the positive terminal and one the negative. When we describe charge flowing we
consider charges moving from the positive terminal of the battery around the conductor and back
into the battery at the negative terminal. As much charge flows out of the positive terminal as
flows into the negative terminal. Because of this, there is no build up of charge in the battery.
The battery does work on the charges causing them to move round the circuit.
We have covered the topics of batteries and circuits but we need to draw these things to help
keep the ideas clear in our minds. To do this we need to agree on how to draw things so that
other people can understand what we are doing. We need a convention.
243
14.3 Voltage and current
As was previously mentioned, we need more than just a continuous path (circuit) before a
continuous flow of electrons will occur. We also need some means to push these electrons around
the circuit. Just like marbles in a tube or water in a pipe, it takes some kind of influencing force
to initiate flow. With electrons, this force is the same force at work in static electricity: the force
produced by an imbalance of electric charge.
The electric charge difference serves to store a certain amount of energy. This energy is not
unlike the energy stored in a high reservoir of water that has been pumped from a lower-level
pond:
Reservoir Energy stored
Water flow
Pump
Pond
The influence of gravity on the water in the reservoir creates a force that attempts to move
the water down to the lower level again. If a suitable pipe is run from the reservoir back to the
pond, water will flow under the influence of gravity down from the reservoir, through the pipe:
244
Reservoir
Energy released
Pond
It takes energy to pump that water from the low-level pond to the high-level reservoir. The
movement of water through the piping back down to its original level constitutes a releasing of
energy stored from previous pumping.
If the water is pumped to an even higher level, it will take even more energy to do so, and so
more energy will be stored. The more energy is stored the more energy is released if the water
is allowed to flow through a pipe back down again:
245
Reservoir
Energy stored
Energy released
Pump
Pond
Reservoir
More energy stored More energy released
Pump
Pond
Electrons are not much different. If we ”pump” electrons away from their normal ”levels,” we
create a condition where a force exists as the electrons seek to re-establish their former positions.
The force attracting electrons back to their original positions is analogous to the force gravity
exerts on water in the reservoir. Just as gravity tries to draw water down to its former level, the
force exerted on the electrons attracts them back to their former posisions.
Just as the pumping of water to a higher level results in energy being stored, ”pumping”
electrons to create an electric charge imbalance results in a certain amount of energy being
stored in that imbalance. Providing a way for water to flow back down from the heights of the
246
reservoir results in a release of that stored energy. Similarly, providing a way for electrons to
flow back to their original ”levels” results in a release of stored energy.
When the electrons are poised in that static condition (just like water sitting still, high in a
reservoir), the energy stored there is called potential energy. It is given that name because it has
the possibility (potential) of release that has not been fully realized yet.
This potential energy, stored in the form of an electric charge imbalance, can be expressed
as a term called voltage. Technically, voltage is a measure of potential energy per unit charge of
electrons, or something a physicist would call specific potential energy. Defined in the context of
static electricity, voltage is the measure of work required to move a unit charge from one location
to another. This work is against the force which tries to keep electric charges balanced. In the
context of electrical power sources, voltage is the amount of potential energy available (work to
be done) per unit charge, to move electrons through a conductor.
Voltage is an expression of potential energy. As such, it represents the possibility or potential
for energy release as the electrons move from one ”level” to another. Because of this, voltage is
always referenced between two points. Consider the water reservoir analogy:
Reservoir
Drop
Location #1
Drop
Location #2
Because of the difference in the height of the drop, there’s potential for much more energy to
be released from the reservoir through the piping to location 2 than to location 1. The principle
can be intuitively understood in dropping a rock: which results in a more violent impact, a rock
dropped from a height of one foot, or the same rock dropped from a height of one kilometre?
Obviously, the drop of greater height results in greater energy released (a more violent impact).
We cannot assess the amount of stored energy in a water reservoir simply by measuring the
volume of water. Similarly, we cannot predict the severity of a falling rock’s impact simply from
knowing the weight of the rock: in both cases we must also consider how far these masses will
drop from their initial height. The amount of energy released by allowing a mass to drop is
relative to the distance between its starting and ending points. Likewise, the potential energy
available for moving electrons from one point to another is relative to those two points. Therefore,
voltage is always expressed as a quantity between two points. Interestingly enough, the analogy
of a mass potentially ”dropping” from one height to another is such an apt model that voltage
between two points is sometimes called a voltage drop.
247
Voltage can be generated in many ways. Chemical reactions, radiant energy, and the influence
of magnetism on conductors are a few ways in which voltage may be produced. Respective
examples of these three sources of voltage are batteries, solar cells, and generators. For now, we
won’t go into detail as to how each of these voltage sources works. The important thing is that
we understand how voltage sources can be applied to create electron flow in a circuit.
Let’s take the symbol for a chemical battery and build a circuit step by step:
-
Battery
+
Any source of voltage, including batteries, have two points for electrical contact. In this
case, we have point 1 and point 2 in the above diagram. The horizontal lines of varying length
indicate that this is a battery. The horizontal lines further indicate the direction which this
battery’s voltage will try to push electrons through a circuit. The horizontal lines in the battery
symbol appear separated, and so make it appear as if the battery is unable to serve as a path
for electrons to move. This is no cause for concern: in real life, those horizontal lines represent
metallic plates immersed in a liquid or semi-solid material that not only conducts electrons, but
also generates the voltage to push them along by interacting with the plates.
Notice the little ”+” and ”-” signs to the immediate left of the battery symbol. The negative
(-) end of the battery is always the end with the shortest dash, and the positive (+) end of
the battery is always the end with the longest dash. By convention, electrons are said to be
”negatively” charged, so the negative end of a battery is that end which tries to push electrons
out of it. Likewise, the positive end is that end which tries to attract electrons.
With the ”+” and ”-” ends of the battery not connected to anything, there will be voltage
between those two points. However, there will be no flow of electrons through the battery,
because there is no continuous path for the electrons to move.
248
Water analogy
Reservoir
Electric Battery
No flow (once the
reservoir has been
1 completely filled)
-
No flow Battery
Pump
+
2 Pond
The same principle holds true for the water reservoir and pump analogy: without a return
pipe back to the pond, stored energy in the reservoir cannot be released in the form of water
flow. Once the reservoir is completely filled up, no flow can occur, no matter how much pressure
the pump may generate. There needs to be a complete path (circuit) for water to flow from the
pond, to the reservoir, and back to the pond in order for continuous flow to occur.
We can provide such a path for the battery by connecting a piece of wire from one end of the
battery to the other. Forming a circuit with a loop of wire, we will initiate a continuous flow of
electrons in a clockwise direction:
249
Electric Circuit
-
Battery
+
electron flow!
Water analogy
Reservoir
water flow!
water flow!
Pump
Pond
So long as the battery continues to produce voltage and the continuity of the electrical path
isn’t broken, electrons will continue to flow in the circuit. Following the metaphor of water
moving through a pipe, this continuous, uniform flow of electrons through the circuit is called a
current. So long as the voltage source keeps ”pushing” in the same direction, the electron flow
will continue to move in the same direction in the circuit. This single-direction flow of electrons
is called a Direct Current, or DC.
Because electric current is composed of individual electrons flowing in unison through a con-
ductor, just like marbles through a tube or water through a pipe, the amount of flow throughout
a single circuit will be the same at any point. If we were to monitor a cross-section of the wire in
a single circuit, counting the electrons flowing by, we would notice the exact same quantity per
unit of time as in any other part of the circuit. The same quantity would be observed regardless
250
of conductor length or conductor diameter.
If we break the circuit’s continuity at any point, the electric current will cease in the entire
loop. Futhermore, the full voltage produced by the battery will be manifested across the break,
between the wire ends that used to be connected:
no flow!
1
- -
Battery voltage
(break) drop
+
+
2
no flow!
Notice the ”+” and ”-” signs drawn at the ends of the break in the circuit, and how they
correspond to the ”+” and ”-” signs next to the battery’s terminals. These markers indicate
the direction that the voltage attempts to push electron flow. Remember that voltage is always
relative between two points. Whether a point in a circuit gets labeled with a ”+” or a ”-”
depends on the other point to which it is referenced. Take a look at the following circuit, where
each corner of the loop is marked with a number for reference:
no flow!
1 2
- -
Battery (break)
+
+
4 3
no flow!
With the circuit’s continuity broken between points 2 and 3, voltage dropped between points
2 and 3 is ”-” for point 2 and ”+” for point 3.
Now let’s see what happens if we connect points 2 and 3 back together again, but place a
break in the circuit between points 3 and 4:
251
no flow!
1 2
-
Battery no flow!
+
+ -
4 3
(break)
With the break between 3 and 4, the voltage drop between those two points is ”+” for 4
and ”-” for 3. Take special note of the fact that point 3’s ”sign” is opposite of that in the first
example, where the break was between points 2 and 3 (where point 3 was labeled ”+”). It is
impossible for us to say that point 3 in this circuit will always be either ”+” or ”-”, because the
sign is not specific to a single point, but is always relative between two points!
14.4 Resistance
The circuit in the previous section is not a very practical one. In fact, it can be quite dangerous to
directly connect the poles of a voltage source together with a single piece of wire. This is because
the magnitude of electric current may be very large in such a short circuit, and the release of
energy very dramatic (usually in the form of heat). Usually, electric circuits are constructed in
such a way as to make practical use of that released energy, in as safe a manner as possible.
One practical and popular use of electric current is for the operation of electric lighting.
The simplest form of electric lamp is a tiny metal ”filament” inside of a clear glass bulb, which
glows white-hot (”incandesces”) with heat energy when sufficient electric current passes through
it. Like the battery, it has two conductive connection points, one for electrons to enter and
the other for electrons to exit. Connected to a source of voltage, an electric lamp circuit looks
something like this:
electron flow
-
Battery Electric lamp (glowing)
+
electron flow
As the electrons work their way through the thin metal filament of the lamp, they encounter
more opposition to motion than they typically would in a thick piece of wire. This opposition to
252
electric current depends on the type of material, its cross-sectional area, and its temperature. It
is technically known as resistance. It serves to limit the amount of current through the circuit
with a given amount of voltage supplied by the battery. The ”short circuit” where we had
nothing but a wire joining one end of the voltage source (battery) to the other had not such a
limiting resistance.
Interesting Materials known as conductors have a low resistance, while insulators have a very high
Fact: one.
When electrons move against the opposition of resistance, ”friction” is generated. Just like
mechanical friction, the friction produced by electrons flowing against a resistance manifests
itself in the form of heat. The concentrated resistance of a lamp’s filament results in a relatively
large amount of heat energy dissipated at that filament. This heat energy is enough to cause
the filament to glow white-hot, producing light. The wires connecting the lamp to the battery
hardly even get warm while conducting the same amount of current. This is because of their
much lower resistance due to their larger cross-section.
As in the case of the short circuit, if the continuity of the circuit is broken at any point,
electron flow stops throughout the entire circuit. With a lamp in place, this means that it will
stop glowing:
no flow! no flow!
(break)
- +
- voltage
drop
Battery Electric lamp
+ (not glowing)
no flow!
As before, with no flow of electrons the entire potential (voltage) of the battery is available
across the break, waiting for the opportunity of a connection to bridge across that break and
permit electron flow again. This condition is known as an open circuit, where a break in the
continuity of the circuit prevents current throughout. All it takes is a single break in continuity
to ”open” a circuit. Once any breaks have been connected once again and the continuity of the
circuit re-established, it is known as a closed circuit.
What we see here is the basis for switching lamps on and off by switches. Because any break
in a circuit’s continuity results in current stopping throughout the entire circuit, we can use
a device designed to intentionally break that continuity (called a switch). This switch can be
mounted at any convenient location that we can run wires to. It controls the flow of electrons
in the hole circuit:
253
switch
It doesn’t matter how twisted or

- convoluted a route the wires take
conducting current, so long as they
Battery form a complete, uninterrupted
+ loop (circuit).
This is how a switch mounted on the wall of a house can control a lamp that is mounted
down a long hallway, or even in another room, far away from the switch. The switch itself is
constructed of a pair of conductive contacts (usually made of some kind of metal) forced together
by a mechanical lever actuator or pushbutton. When the contacts touch each other, electrons are
able to flow from one to the other and the circuit’s continuity is established; when the contacts are
separated, electron flow from one to the other is prevented by the insulation of the air between,
and the circuit’s continuity is broken.
In keeping with the ”open” and ”closed” terminology of circuits, a switch that is making con-
tact from one connection terminal to the other provides continuity for electrons to flow through,
and is called a closed switch. Conversely, a switch that is breaking continuity won’t allow elec-
trons to pass through and is called an open switch. This terminology is often confusing to the
new student of electronics, because the words ”open” and ”closed” are commonly understood
in the context of a door, where ”open” is equated with free passage and ”closed” with block-
age. With electrical switches, these terms have opposite meaning: ”open” means no flow while
”closed” means free passage of electrons.
14.5 Voltage and current in a practical circuit

Because it takes energy to force electrons to flow against the opposition of a resistance, there will
be voltage manifested (or ”dropped”) between any points in a circuit with resistance between
them. It is important to note that although the amount of current is uniform in a simple circuit,
the amount of voltage between different sets of points in a single circuit may vary considerably:
254
same rate of current . . .
1 2
-
Battery
+
4 3
. . . at all points in this circuit
(NOTE TO SELF: How do you actually measure currents and voltages? In the next two
paragraphs there’s a lot of ado what we ’see’ at different points of a circuit, but I don’t see
anything!)
Take this circuit as an example. We labelled four points with the numbers 1, 2, 3, and 4. The
amount of current conducted through the wire between points 1 and 2 is exactly the same as the
amount of current conducted through the lamp (between points 2 and 3). This same quantity
of current passes through the wire between points 3 and 4, and through the battery (between
points 1 and 4).
However, we will find the voltage appearing between any two of these points to be directly
proportional to the resistance within the conductive path between those two points. In a normal
lamp circuit, the resistance of a lamp will be much greater than the resistance of the connecting
wires. So we should expect to see a substantial amount of voltage drop between points 2 and
3, and only a very small one between points 1 and 2, or between 3 and 4. The voltage drop
between points 1 and 4, of course, will be the full voltage offered by the battery. This will be
only slightly higher than the voltage drop across the lamp (between points 2 and 3).
This, again, is analogous to the water reservoir system:
255
2 Reservoir 1
(energy stored)
Waterwheel
(energy released)
Pump
3
4
Pond
Between points 2 and 3, where the falling water is releasing energy at the water-wheel, there
is a difference of pressure between the two points. This reflects the opposition to the flow of water
through the water-wheel. From point 1 to point 2, or from point 3 to point 4, where water is
flowing freely through reservoirs with little opposition, there is little or no difference of pressure
(no potential energy). However, the rate of water flow in this continuous system is the same
everywhere (assuming the water levels in both pond and reservoir are unchanging): through the
pump, through the water-wheel, and through all the pipes. So it is with simple electric circuits:
the rate of electron flow is the same at every point in the circuit, although voltages may differ
between different sets of points.
14.6 Direction of current flow in a circuit

We know now that the moving charges in an electrical ciruit are the negatively chargend electrons.
These electrons naturally flow from the negative pole of a battery to the positive pole. This form
of symbology became known as electron flow notation:
Electron flow notation
+ Electric charge moves

from the negative (surplus)
side of the battery to the
- positive (deficiency) side.
256
However, for historical reasons the current flow in a circuit is conventionally denoted in the
opposite direction. That is, it flows from the positive pole to the negative one. This became
known as conventional flow notation:
Conventional flow notation
+ Electric charge moves

from the positive (surplus)
side of the battery to the
- negative (deficiency) side.
In conventional flow notation, we show the motion of charge according to the (technically
incorrect) labels of + and −. This way the labels make sense, but the direction of charge flow is
incorrect.
Does it matter, really, how we designate charge flow in a circuit? Not really, so long as we’re
consistent in the use of our symbols. You may follow an imagined direction of current (conven-
tional flow) or the actual (electron flow) with equal success insofar as circuit analysis is concerned.
Concepts of voltage, current, resistance, continuity, and even mathematical treatments such as
Ohm’s Law (section 2 (NOTE TO SELF: make this reference dynamic)) and Kirchhoff’s Laws
(section 6 (NOTE TO SELF: make this reference dynamic)) remain just as valid with either
style of notation.
Aside: Benjamin Franklin made a conjecture regarding the direction of charge

flow when rubbing smooth wax with rough wool. By assuming that the observed
charges flow from the wax to the wool, he set the precedent for electrical notation
that exists to this day. Because Franklin assumed electric charge moved in the
opposite direction that it actually does, electrons are said to have a negative charge,
and so objects he called ”negative” (representing a deficiency of charge) actually
have a surplus of electrons.
By the time the true direction of electron flow was discovered, the nomenclature
of ”positive” and ”negative” had already been so well established in the scientific
community that no effort was made to change it. It would have made more sense to
call electrons ”positive” in referring to ”excess” charge. You see, the terms ”posi-
tive” and ”negative” are human inventions, and as such have no absolute meaning
beyond our own conventions of language and scientific description. Franklin could
have just as easily referred to a surplus of charge as ”black” and a deficiency as
”white”, in which case scientists would speak of electrons having a ”white” charge.
However, because we tend to associate the word ”positive” with ”surplus” and
”negative” with ”deficiency,” the standard label for electron charge does seem
backward. As discussed above, many engineers decided to retain the old concept
of electricity with ”positive” referring to a surplus of charge, and label charge flow
(current) accordingly.
257
14.7 How voltage, current, and resistance relate
First lets recap some of the ideas we have learnt so far. We will need these to understand how
voltage, current and resistance relate.
An electric circuit is formed when a conductive path is created to allow free electrons to
continuously move. This continuous movement of free electrons through the conductors of a
circuit is called a current. It is often referred to in terms of ”flow,” just like the flow of a liquid
through a hollow pipe. The force motivating electrons to ”flow” in a circuit is called voltage.
Voltage is a specific measure of potential energy that is always relative between two points.
When we speak of a certain amount of voltage being present in a circuit, we are referring to the
measurement of how much potential energy exists to move electrons from one particular point
in that circuit to another particular point. Without reference to two particular points, the term
”voltage” has no meaning.
Free electrons tend to move through conductors with some degree of friction, or opposition
to motion. This opposition to motion is more properly called resistance. The amount of current
in a circuit depends on the amount of voltage available to motivate the electrons (NOTE TO
SELF: Motivated electrons?), and also the amount of resistance in the circuit to oppose electron
flow. Just like voltage, resistance is a quantity relative between two points. For this reason, the
quantities of voltage and resistance are often stated as being ”between” or ”across” two points
in a circuit.
To be able to make meaningful statements about these quantities in circuits, we need to be
able to describe their quantities in the same way that we might quantify mass, temperature,
volume, length, or any other kind of physical quantity. For mass we might use the units of
”pound” or ”gram”. For temperature we might use degrees Fahrenheit or degrees Celsius. Here
are the standard units of measurement for electrical current, voltage, and resistance:
Quantity Symbol Unit of Measurement Abbreviation of Unit

Current I Ampere A
Voltage V (or E) volt V
Resistance R Ohm Ω
Charge Q coulomb C
The ”symbol” given for each quantity is the standard alphabetical letter used to represent that
quantity in an algebraic equation. Standardized letters like these are common in the disciplines
of physics and engineering, and are internationally recognized. The ”unit abbreviation” for each
quantity represents the alphabetical symbol used as a shorthand notation for its particular unit
of measurement. And, yes, that strange-looking ”horseshoe” symbol is the capital Greek letter
Ω (called omega), just a character in a foreign alphabet (apologies to any Greek readers here).
Aside: Each unit of measurement is named after a famous experimenter in

electricity: The amp after the Frenchman Andre M. Ampere, the volt after the
Italian Alessandro Volta, and the ohm after the German Georg Simon Ohm.
The mathematical symbol for each quantity is meaningful as well. The ”R” for
resistance and the ”V ” for voltage are both self-explanatory. The ”I” is thought
to have been meant to represent ”Intensity” (of electron flow). The other symbol
for voltage, ”E”, stands for ”Electromotive force”. The symbols ”E” and ”V ” are
interchangeable for the most part, although some texts reserve ”E” to represent
voltage across a source (such as a battery or generator) and ”V ” to represent
voltage across anything else.
258
One foundational unit of electrical measurement is the unit of the coulomb. It is a measure
of electric charge proportional to the number of electrons in an imbalanced state. One coulomb
of charge is rougly equal to the charge of 6,250,000,000,000,000,000 electrons. The symbol for
electric charge quantity is the capital letter ”Q”, with the unit of coulombs abbreviated by the
capital letter ”C”. It so happens that the unit for electron flow, the ampere, is equal to 1 coulomb
of electrons passing by a given point in a circuit in 1 second of time. Cast in these terms, current
is the rate of electric charge motion through a conductor.
As stated before, voltage is the measure of potential energy per unit charge available to
motivate electrons from one point to another. Before we can precisely define what a ”volt” is, we
must understand how to measure this quantity we call ”potential energy”. The general metric
unit for energy of any kind is the joule, equal to the amount of work performed by a force of 1
newton exerted through a motion of 1 meter (in the same direction). (NOTE TO SELF: Make
a reference to the Mechanics chapter.) Defined in these scientific terms, 1 volt is equal to 1 joule
of electric potential energy per (divided by) 1 coulomb of charge. Thus, a 9 volt battery releases
9 joules of energy for every coulomb of electrons moved through a circuit.
These units and symbols for electrical quantities will become very important to know as
we begin to explore the relationships between them in circuits. The first, and perhaps most
important, relationship between current, voltage, and resistance is called Ohm’s Law. It states
that the amount of electric current through a metal conductor in a circuit is directly proportional
to the voltage impressed across it, for any given temperature. It can be expressed in the form of
a simple equation, describing how voltage, current, and resistance interrelate:
V = I ·R. (14.1)
In this algebraic expression, voltage (V ) is equal to current (I) multiplied by resistance (R).
Aside: Georg Simon Ohm published his law in his 1827 paper, The Galvanic
Circuit Investigated Mathematically.
Using algebra techniques, we can manipulate this equation into two variations, solving for I
and for R, respectively:
V V
I= R= . (14.2)
R I
Let’s see how these equations might work to help us analyze simple circuits:
electron flow
+
Battery Electric lamp (glowing)
-
electron flow
259
(NOTE TO SELF: replace E by V)
In the above circuit, there is only one source of voltage (the battery, on the left) and only one
source of resistance to current (the lamp, on the right). This makes it very easy to apply Ohm’s
Law. If we know the values of any two of the three quantities (voltage, current, and resistance)
in this circuit, we can use Ohm’s Law to determine the third. In this first example, we will
calculate the amount of current (I) in a circuit, given values of voltage (V ) and resistance (R):
Worked Example 81
Question: What is the amount of current (I) in this circuit?
I = ???
+
Battery Lamp
E = 12 V R=3Ω
-
I = ???

Answer:
V 12 V
I= = = 4A. (14.3)
R 3Ω
In the second example, we will calculate the amount of resistance (R) in a circuit, given values
of voltage (V ) and current (I):
Worked Example 82
Question: What is the amount of resistance (R) offered by the lamp?
260
I=4A
+
Battery Lamp
E = 36 V R = ???
-
I=4A

Answer:
V 36 V
R= = = 9Ω. (14.4)
I 4A
In the last example, we will calculate the amount of voltage supplied by a battery, given
values of current (I) and resistance (R):
Worked Example 83
Question: What is the amount of voltage provided by the battery?
I=2A
+
Battery Lamp
E = ??? R=7Ω
-
I=2A

Answer:
V = I · R = (2 A) · (7 Ω) = 14 V . (14.5)
261
Ohm’s Law is a very simple and useful tool for analyzing electric circuits. It is used so often
in the study of electricity and electronics that it needs to be committed to memory by the serious
student. All you need to do is commit V = I · R to memory and derive the other two formulae
from that when you need them!
14.8 Voltmeters, ammeters, and ohmmeters

As we have seen in previous sections, an electric circuit is made up of a number of different
components such as batteries and resistors. In electronics, there are many types of meters used
to measure the properties of the individual components of an electric circuit. For example, one
may be interested in measuring the amount of current flowing through a circuit, or measure the
voltage provided by a battery. In this section we will discuss the practical usage of voltmeters,
ammeters, and ohmmeters.
A voltmeter is an instrument for measuring the voltage between two points in an electric
circuit. In analogy with a water circuit, a voltmeter is like a meter designed to measure pressure
difference. Since one is interested in measuring the voltage between two points in a circuit, a
voltmeter must be connected in parallel with the portion of the circuit on which the measurement
is made:
The above illustration shows a voltmeter connected in parallel with a battery. One lead of
the voltmeter is connected to one end of the battery and the other lead is connected to the
opposite end. The voltmeter may also be used to measure the voltage across a resistor or any
other component of a circuit that has a voltage drop.
An ammeter is an instrument used to measure the flow of electric current in a circuit. Since
one is interested in measuring the current flowing through a circuit component, the ammeter
must be connected in series with the measured circuit component:
A
An ohmmeter is an instrument for measuring electrical resistance. The basic ohmmeter can
function much like an ammeter. The ohmmeter works by suppling a constant voltage to the
resistor and measuring the current flowing through it. The measured current is then converted
into a corresponding resistance reading through Ohm’s law. One cautionary detail needs to be
262
mentioned with regard to ohmmeters: they only function correctly when measuring resistance
that is not being powered by a voltage or current source. In other words, you cannot measure the
resistance of a component that is already connected to a circuit. The reason for this is simple:
the ohmmeter’s accurate indication depends only on its own source of voltage. The presence
of any other voltage across the measured circuit component interferes with the ohmmeter’s
operation. The circuit diagram below shows an ohmmeter solely connected with a resistor:
The table below summarizes the use of each measuring instrument that we discussed and the
way it should be connected to a circuit component.
Instrument Measured Quantity Proper Connection

Voltmeter Voltage In Parallel
Ammeter Current In Series
Ohmmeter Resistance Only with Resistor
14.9 An analogy for Ohm’s Law

In our water-and-pipe analogy, Ohm’s Law also exists. Think of a water pump that exerts
pressure (voltage) to push water around a ”circuit” (current) through a restriction (resistance).
If the resistance to water flow stays the same and the pump pressure increases, the flow rate
must also increase.
↑ ↑
V =I R
If the pressure stays the same and the resistance increases (making it more difficult for the
water to flow), then the flow rate must decrease:
↓↑
V =I R
If the flow rate stays the same while the resistance to flow decreases, the required pressure
from the pump decreases:
↓ ↓
V=I R
As odd as it may seem, the actual mathematical relationship between pressure, flow, and
resistance is actually more complex for fluids like water than it is for electrons. If you pursue
further studies in physics, you will discover this for yourself. Thankfully for the electronics
student, the mathematics of Ohm’s Law is very simple.
263
14.10 Power in electric circuits
In addition to voltage and current, there is another measure of free electron activity in a circuit:
power. The concept of power was introduced in Chapter 8. Basically, it is a measure of how
rapidly a standard amount of work is done.
In electric circuits, power is a function of both voltage and current:
P = IV.
So power (P ) is exactly equal to current (I) multiplied by voltage (V ) and there is no extra
constant of proportionality. The unit of measurement for power is the Watt (abbreviated W).
Aside: You can verify for yourself that the eqution for power in an electric cicuit
makes sense. Remember that voltage is the specific work (or potential energy)
per unit charge, while current is the amount electric charge that flow though a
conductor per time unit. So the product of those two qunatities is the oumount
of work per time unit, which is exactly the power.
It is important to realise that only the combination of a voltage drop and the flow of current
corresponds to power. So, a circuit with high voltage and low current may be dissipating the
same amount of power as a circuit with low voltage and high current.
In an open circuit, where voltage is present between the terminals of the source and there
is zero current, there is zero power dissipated, no matter how great that voltage may be. Since
P = IV and I = 0, the power dissipated in any open circuit must be zero.
14.11 Calculating electric power

We’ve seen the formula for determining the power in an electric circuit: by multiplying the
voltage in volts by the current in Ampères we arrive at an answer in watts.” Let’s apply this to
a circuit example:
I = ???
+
Battery Lamp
E = 18 V R=3Ω
-
I = ???
In the above circuit, we know we have a battery voltage of 18 Volts and a lamp resistance of
3 Ω. Using Ohm’s Law to determine current, we get:
V 18V
I= = = 6A.
R 3Ω
264
Now that we know the current, we can take that value and multiply it by the voltage to
determine power:
P = IV = (6A)(18V = 108W.
Answer: the lamp is dissipating (releasing) 108 W of power, most likely in the form of both
light and heat.
Let’s try taking that same circuit and increasing the battery voltage to see what happens:
I = ???
+
Battery Lamp
E = 36 V R=3Ω
-
I = ???
Since the resistance stays the same, the current will increase when we increase the voltage:
V 36V
I== = 12A.
R 3Ω
Note that Ohm’s Law is linear, so the current exactly doubles when we double the voltage.
Now, let’s calculate the power:
P = IV = (12A)(36V) = 432W.
Notice that the power has increased just as we might have suspected, but it increased quite
a bit more than the current. Why is this? Because power is a function of voltage multiplied by
current, and both voltage and current doubled from their previous values, the power will increase
by a factor of 2 x 2, or 4: the ratio of the new power 432 W and the old power 108 W, is exactly
4.
We could in fact have arrived at this result without the intermediate step of calculating the
current. From
I = VR and P = IV
we can expres power directly as a function of voltage:
V V2
P = RV = R .
The analogous relation between power and current is
P = IIR = I 2 R.
265
Interesting It was James Prescott Joule, not Georg Simon Ohm, who first discovered the mathe-
Fact: matical relationship between power dissipation and current through a resistance. This
discovery, published in 1841, followed the form of the last equation (P = I 2 R), and is
properly known as Joule’s Law. However, these power equations are so commonly asso-
ciated with the Ohm’s Law equations relating voltage, current, and resistance (V = IR
; I = V /R ; and R = V /I) that they are frequently credited to Ohm.
14.12 Resistors
Because the relationship between voltage, current, and resistance in any circuit is so regular,
we can reliably control any variable in a circuit simply by controlling the other two. Perhaps
the easiest variable in any circuit to control is its resistance. This can be done by changing the
material, size, and shape of its conductive components (remember how the thin metal filament
of a lamp created more electrical resistance than a thick wire?).
Special components called resistors are made for the express purpose of creating a precise
quantity of resistance for insertion into a circuit. They are typically constructed of metal wire or
carbon, and engineered to maintain a stable resistance value over a wide range of environmental
conditions. Unlike lamps, they do not produce light, but they do produce heat as electric power
is dissipated by them in a working circuit. Typically, though, the purpose of a resistor is not to
produce usable heat, but simply to provide a precise quantity of electrical resistance.
The most common schematic symbol for a resistor is a zig-zag line:
Resistor values in ohms are usually shown as an adjacent number, and if several resistors are
present in a circuit, they will be labeled with a unique identifier number such as R 1 , R2 , R3 , etc.
As you can see, resistor symbols can be shown either horizontally or vertically:
R1 This is resistor "R1"

with a resistance value
150 of 150 ohms.
This is resistor "R2"

R2 25 with a resistance value
of 25 ohms.
In keeping more with their physical appearance, an alternative schematic symbol for a resistor
looks like a small, rectangular box:
Resistors can also be shown to have varying rather than fixed resistances. This might be
for the purpose of describing an actual physical device designed for the purpose of providing
an adjustable resistance, or it could be to show some component that just happens to have an
unstable resistance:
266
variable
resistance
. . . or . . .
In fact, any time you see a component symbol drawn with a diagonal arrow through it, that
component has a variable rather than a fixed value. This symbol ”modifier” (the diagonal arrow)
is standard electronic symbol convention.
Aside: In practice, resistors are not only rated in terms of their resistance in
ohms, but also in term the amount of power they can dissipate in watts. Resistors
dissipate heat as the electric currents through them overcome the ”friction” of
their resistance and can in fact become quite hot in actual applications. Most
resistors found in small electronic devices such as portable radios are rated at 1/4
(0.25) watt or less. The power rating of any resistor is roughly proportional to its
physical size. Also note how resistances (in ohms) have nothing to do with size!
14.13 Nonlinear conduction

Ohm’s Law is a powerful tool for analyzing electric circuits, but it has a practical limitation.
In the application of Ohm’s Law, we alwasy assume that the restistance does not change as a
function of voltage and current. For most conductors, this is a reasonable approximation as long
ads the temperature does not change too much.
In a normal lightbulb, the resistance of the filament wire will increase dramatically as it
warms from room temperature to operating temperature. If we increase the supply voltage in a
real lamp circuit, the resulting increase in current causes the filament to increase in temperature,
which increases its resistance. This effectively limits the increase in current. Consequently,
voltage and current do not follow the simple equation I = V /R, with a constant R (of 3 Ω ion
our example). The lamp’s filament resistance does not remain stable for different currents.
The phenomenon of resistance changing with variations in temperature is one shared by al-
most all metals, of which most wires are made. For most applications, these changes in resistance
are small enough to be ignored. In the application of metal lamp filaments, which increase a lot
in temperature (up to about 1000o C, and starting from room temperature) the change is quite
large.
A more realistic analysis of a lamp circuit over several different values of battery voltage
would generate a plot of this shape:
267
I
(current)
E
(voltage)
The plot is no longer a straight line. It rises sharply on the left, as voltage increases from zero
to a low level. As it progresses to the right we see the line flattening out, the circuit requiring
greater and greater increases in voltage to achieve equal increases in current.
If we apply Ohm’s Law to find the resistance of this lamp circuit with the voltage and current
values plotted above, the calculated values will change with voltage or curreny. We could say that
the resistance here is nonlinear, increasing with increasing current and voltage. The nonlinearity
is caused by the effects of high temperature on the metal wire of the lamp filament.
14.14 Circuit wiring

So far, we’ve been analyzing single-battery, single-resistor circuits with no regard for the connect-
ing wires between the components, so long as a complete circuit is formed. Does the wire length
or circuit ”shape” matter to our calculations? Let’s look at a couple of circuit configurations
and find out:
1 2
Battery Resistor
10 V 5Ω
4 3
1 2
Battery Resistor
10 V 5Ω
4 3
268
When we draw wires connecting points in a circuit, we usually assume those wires have
negligible resistance. As such, they contribute no appreciable effect to the overall resistance of the
circuit, and so the only resistance we have to contend with is the resistance in the components.
In the above circuits, the only resistance comes from the 5 Ω resistors, so that is all we will
consider in our calculations. In real life, metal wires actually do have resistance (and so do
power sources!), but those resistances are generally so much smaller than the resistance present
in the other circuit components that they can be safely ignored.
If connecting wire resistance is very little or none, we can regard the connected points in
a circuit as being electrically common. That is, points 1 and 2 in the above circuits may be
physically joined close together or far apart, and it doesn’t matter for any voltage or resistance
measurements relative to those points. The same goes for points 3 and 4. It is as if the ends
of the resistor were attached directly across the terminals of the battery, so far as our Ohm’s
Law calculations and voltage measurements are concerned. This is useful to know, because it
means you can re-draw a circuit diagram or re-wire a circuit, shortening or lengthening the wires
as desired without appreciably impacting the circuit’s function. All that matters is that the
components attach to each other in the same sequence.
It also means that voltage measurements between sets of ”electrically common” points will
be the same. That is, the voltage between points 1 and 4 (directly across the battery) will be
the same as the voltage between points 2 and 3 (directly across the resistor). Take a close look
at the following circuit, and try to determine which points are common to each other:
1 2
Battery 4
10 V 3
Resistor
5Ω
6 5
Here, we only have 2 components excluding the wires: the battery and the resistor. Though
the connecting wires take a convoluted path in forming a complete circuit, there are several
electrically common points in the electrons’ path. Points 1, 2, and 3 are all common to each
other, because they’re directly connected together by wire. The same goes for points 4, 5, and 6.
The voltage between points 1 and 6 is 10 volts, coming straight from the battery. However,
since points 5 and 4 are common to 6, and points 2 and 3 common to 1, that same 10 volts also
exists between these other pairs of points:
Between points 1 and 4 = 10 volts

Between points 3 and 4 = 10 volts (directly across the resistor)
Between points 1 and 6 = 10 volts (directly across the battery)
Since electrically common points are connected together by (zero resistance) wire, there is no
significant voltage drop between them regardless of the amount of current conducted from one
269
to the next through that connecting wire. Thus, if we were to read voltages between common
points, we should show (practically) zero:
Between points 1 and 2 = 0 volts Points 1, 2, and 3 are

Between points 2 and 3 = 0 volts electrically common
Between points 4 and 5 = 0 volts Points 4, 5, and 6 are
Between points 5 and 6 = 0 volts electrically common
This makes sense mathematically, too. With a 10 volt battery and a 5 Ω resistor, the circuit
current will be 2 amps. With wire resistance being zero, the voltage drop across any continuous
stretch of wire can be determined through Ohm’s Law as such:
E=IR
E = (2 A)(0 Ω)
E=0V
It should be obvious that the calculated voltage drop across any uninterrupted length of wire
in a circuit where wire is assumed to have zero resistance will always be zero, no matter what
the magnitude of current, since zero multiplied by anything equals zero.
Because common points in a circuit will exhibit the same relative voltage and resistance
measurements, wires connecting common points are often labeled with the same designation.
This is not to say that the terminal connection points are labeled the same, just the connecting
wires. Take this circuit as an example:
1 wire #2 2
wire #2
Battery 4
10 V 3
Resistor
5Ω
wire #1
6 5
wire #1
wire #1
Points 1, 2, and 3 are all common to each other, so the wire connecting point 1 to 2 is labeled
the same (wire 2) as the wire connecting point 2 to 3 (wire 2). In a real circuit, the wire stretching
from point 1 to 2 may not even be the same color or size as the wire connecting point 2 to 3,
but they should bear the exact same label. The same goes for the wires connecting points 6, 5,
and 4.
Knowing that electrically common points have zero voltage drop between them is a valuable
troubleshooting principle. If I measure for voltage between points in a circuit that are supposed
to be common to each other, I should read zero. If, however, I read substantial voltage between
those two points, then I know with certainty that they cannot be directly connected together.
270
If those points are supposed to be electrically common but they register otherwise, then I know
that there is an ”open failure” between those points.
One final note: for most practical purposes, wire conductors can be assumed to possess zero
resistance from end to end. In reality, however, there will always be some small amount of
resistance encountered along the length of a wire, unless it’s a superconducting wire. Knowing
this, we need to bear in mind that the principles learned here about electrically common points
are all valid to a large degree, but not to an absolute degree. That is, the rule that electrically
common points are guaranteed to have zero voltage between them is more accurately stated
as such: electrically common points will have very little voltage dropped between them. That
small, virtually unavoidable trace of resistance found in any piece of connecting wire is bound
to create a small voltage across the length of it as current is conducted through. So long as you
understand that these rules are based upon ideal conditions, you won’t be perplexed when you
come across some condition appearing to be an exception to the rule.
14.15 Polarity of voltage drops

We can trace the direction that electrons will flow in the same circuit by starting at the negative
(-) terminal and following through to the positive (+) terminal of the battery, the only source
of voltage in the circuit. From this we can see that the electrons are moving counter-clockwise,
from point 6 to 5 to 4 to 3 to 2 to 1 and back to 6 again.
As the current encounters the 5 Ω resistance, voltage is dropped across the resistor’s ends.
The signs of this voltage drop is negative (-) at point 4 with respect to positive (+) at point 3.
We can mark the polarity of the resistor’s voltage drop with these negative and positive symbols,
in accordance with the direction of current (whichever end of the resistor the current is entering
is negative with respect to the end of the resistor it is exiting:
1 2
current
+ current
Battery 4 - +
10 V - 3
Resistor
5Ω
6 5
We could make our table of voltages a little more complete by marking the polarity of the
voltage for each pair of points in this circuit:
Between points 1 (+) and 4 (-) = 10 volts

271
While it might seem a little silly to document polarity of voltage drop in this circuit, it is
an important concept to master. It will be critically important in the analysis of more complex
circuits involving multiple resistors and/or batteries.
It should be understood that polarity has nothing to do with Ohm’s Law: there will never
be negative voltages, currents, or resistance entered into any Ohm’s Law equations! There are
other mathematical principles of electricity that do take polarity into account through the use
of signs (+ or -), but not Ohm’s Law.
14.16 What are ”series” and ”parallel” circuits?

Circuits consisting of just one battery and one load resistance are very simple to analyze, but
they are not often found in practical applications. Usually, we find circuits where more than two
components are connected together.
There are two basic ways in which to connect more than two circuit components: series and
parallel. First, an example of a series circuit:
Series
R1
1 2
+
R2
-
4 R3 3
Here, we have three resistors (labeled R1 , R2 , and R3 ), connected in a long chain from one
terminal of the battery to the other. (It should be noted that the subscript labeling – those
little numbers to the lower-right of the letter ”R” – are unrelated to the resistor values in ohms.
They serve only to identify one resistor from another.) The defining characteristic of a series
circuit is that there is only one path for electrons to flow. In this circuit the electrons flow in a
counter-clockwise direction, from point 4 to point 3 to point 2 to point 1 and back around to 4.
Now, let’s look at the other type of circuit, a parallel configuration:
Parallel
1 2 3 4
+
R1 R2 R3
-
8 7 6 5
Again, we have three resistors, but this time they form more than one continuous path for
electrons to flow. There’s one path from 8 to 7 to 2 to 1 and back to 8 again. There’s another
from 8 to 7 to 6 to 3 to 2 to 1 and back to 8 again. And then there’s a third path from 8 to 7 to
272
6 to 5 to 4 to 3 to 2 to 1 and back to 8 again. Each individual path (through R1 , R2 , and R3 )
is called a branch.
The defining characteristic of a parallel circuit is that all components are connected between
the same set of electrically common points. Looking at the schematic diagram, we see that points
1, 2, 3, and 4 are all electrically common. So are points 8, 7, 6, and 5. Note that all resistors as
well as the battery are connected between these two sets of points.
And, of course, the complexity doesn’t stop at simple series and parallel either! We can have
circuits that are a combination of series and parallel, too:
Series-parallel
R1 2 3
1
+
R2 R3
-
6 5 4
In this circuit, we have two loops for electrons to flow through: one from 6 to 5 to 2 to 1 and
back to 6 again, and another from 6 to 5 to 4 to 3 to 2 to 1 and back to 6 again. Notice how
both current paths go through R1 (from point 2 to point 1). In this configuration, we’d say that
R2 and R3 are in parallel with each other, while R1 is in series with the parallel combination of
R2 and R3 .
This is just a preview of things to come. Don’t worry! We’ll explore all these circuit config-
urations in detail, one at a time!
The basic idea of a ”series” connection is that components are connected end-to-end in a line
to form a single path for electrons to flow:
Series connection
R1 R2 R3 R4
only one path for electrons to flow!

The basic idea of a ”parallel” connection, on the other hand, is that all components are
connected across each other’s leads. In a purely parallel circuit, there are never more than two
sets of electrically common points, no matter how many components are connected. There are
many paths for electrons to flow, but only one voltage across all components:
273
Parallel connection
These points are electrically common
R1 R2 R3 R4
These points are electrically common

Series and parallel resistor configurations have very different electrical properties. We’ll ex-
plore the properties of each configuration in the sections to come.
14.17 Simple series circuits

Let’s start with a series circuit consisting of three resistors and a single battery:
R1
1 2
3 kΩ
+
9V 10 kΩ R2
-
5 kΩ
4 3
R3
The first principle to understand about series circuits is that the amount of current is the
same through any component in the circuit. This is because there is only one path for electrons
to flow in a series circuit, and because free electrons flow through conductors like marbles in a
tube, the rate of flow (marble speed) at any point in the circuit (tube) at any specific point in
time must be equal.
From the way that the 9 volt battery is arranged, we can tell that the electrons in this circuit
will flow in a counter-clockwise direction, from point 4 to 3 to 2 to 1 and back to 4. However,
we have one source of voltage and three resistances. How do we use Ohm’s Law here?
An important caveat to Ohm’s Law is that all quantities (voltage, current, resistance, and
power) must relate to each other in terms of the same two points in a circuit. For instance, with
a single-battery, single-resistor circuit, we could easily calculate any quantity because they all
applied to the same two points in the circuit:
274
1 2
+
9V 3 kΩ
-
4 3
E
I=
R
9 volts
I= = 3 mA
3 kΩ
Since points 1 and 2 are connected together with wire of negligible resistance, as are points 3
and 4, we can say that point 1 is electrically common to point 2, and that point 3 is electrically
common to point 4. Since we know we have 9 volts of electromotive force between points 1 and
4 (directly across the battery), and since point 2 is common to point 1 and point 3 common to
point 4, we must also have 9 volts between points 2 and 3 (directly across the resistor). Therefore,
we can apply Ohm’s Law (I = E/R) to the current through the resistor, because we know the
voltage (E) across the resistor and the resistance (R) of that resistor. All terms (E, I, R) apply
to the same two points in the circuit, to that same resistor, so we can use the Ohm’s Law formula
with no reservation.
However, in circuits containing more than one resistor, we must be careful in how we apply
Ohm’s Law. In the three-resistor example circuit below, we know that we have 9 volts between
points 1 and 4, which is the amount of electromotive force trying to push electrons through the
series combination of R1 , R2 , and R3 . However, we cannot take the value of 9 volts and divide
it by 3k, 10k or 5k Ω to try to find a current value, because we don’t know how much voltage is
across any one of those resistors, individually.
R1
1 2
3 kΩ
+
9V 10 kΩ R2
-
5 kΩ
4 3
R3
The figure of 9 volts is a total quantity for the whole circuit, whereas the figures of 3k, 10k,
and 5k Ω are individual quantities for individual resistors. If we were to plug a figure for total
voltage into an Ohm’s Law equation with a figure for individual resistance, the result would not
relate accurately to any quantity in the real circuit.
For R1 , Ohm’s Law will relate the amount of voltage across R1 with the current through R1 ,
given R1 ’s resistance, 3kΩ:
275
ER1
IR1 = ER1 = IR1 (3 kΩ)
3 kΩ
But, since we don’t know the voltage across R1 (only the total voltage supplied by the battery
across the three-resistor series combination) and we don’t know the current through R 1 , we can’t
do any calculations with either formula. The same goes for R2 and R3 : we can apply the Ohm’s
Law equations if and only if all terms are representative of their respective quantities between
the same two points in the circuit.
So what can we do? We know the voltage of the source (9 volts) applied across the series
combination of R1 , R2 , and R3 , and we know the resistances of each resistor, but since those
quantities aren’t in the same context, we can’t use Ohm’s Law to determine the circuit current. If
only we knew what the total resistance was for the circuit: then we could calculate total current
with our figure for total voltage (I=E/R).
This brings us to the second principle of series circuits: the total resistance of any series
circuit is equal to the sum of the individual resistances. This should make intuitive sense: the
more resistors in series that the electrons must flow through, the more difficult it will be for those
electrons to flow. In the example problem, we had a 3 kΩ, 10 kΩ, and 5 kΩ resistor in series,
giving us a total resistance of 18 kΩ:
Rtotal = R1 + R2 + R3
Rtotal = 3 kΩ + 10 kΩ + 5 kΩ
Rtotal = 18 kΩ
In essence, we’ve calculated the equivalent resistance of R1 , R2 , and R3 combined. Know-
ing this, we could re-draw the circuit with a single equivalent resistor representing the series
combination of R1 , R2 , and R3 :
1
+
R1 + R2 + R3 =
9V
18 kΩ
-
4
Now we have all the necessary information to calculate circuit current, because we have the
voltage between points 1 and 4 (9 volts) and the resistance between points 1 and 4 (18 kΩ):
Etotal
Itotal =
Rtotal
9 volts
Itotal = = 500 µA
18 kΩ
Knowing that current is equal through all components of a series circuit (and we just deter-
mined the current through the battery), we can go back to our original circuit schematic and
note the current through each component:
276
R1 3 kΩ
1 2
+ I = 500 µA
R2
9V
10 kΩ
- I = 500 µA
4 R3 5 kΩ 3
Now that we know the amount of current through each resistor, we can use Ohm’s Law to
determine the voltage drop across each one (applying Ohm’s Law in its proper context):
ER1 = IR1 R1 ER2 = IR2 R2 ER3 = IR3 R3
ER1 = (500 µA)(3 kΩ) = 1.5 V
ER2 = (500 µA)(10 kΩ) = 5 V
ER3 = (500 µA)(5 kΩ) = 2.5 V

Notice the voltage drops across each resistor, and how the sum of the voltage drops (1.5 +
5 + 2.5) is equal to the battery (supply) voltage: 9 volts. This is the third principle of series
circuits: that the supply voltage is equal to the sum of the individual voltage drops.
However, the method we just used to analyze this simple series circuit can be streamlined
for better understanding. By using a table to list all voltages, currents, and resistances in the
circuit, it becomes very easy to see which of those quantities can be properly related in any
Ohm’s Law equation:
R1 R2 R3 Total
E Volts
I Amps
R Ohms
Ohm’s Ohm’s Ohm’s Ohm’s

Law Law Law Law
The rule with such a table is to apply Ohm’s Law only to the values within each vertical
column. For instance, ER1 only with IR1 and R1 ; ER2 only with IR2 and R2 ; etc. You begin
your analysis by filling in those elements of the table that are given to you from the beginning:
R1 R2 R3 Total
E 9 Volts
I Amps
R 3k 10k 5k Ohms
As you can see from the arrangement of the data, we can’t apply the 9 volts of E T (total
277
voltage) to any of the resistances (R1 , R2 , or R3 ) in any Ohm’s Law formula because they’re in
different columns. The 9 volts of battery voltage is not applied directly across R 1 , R2 , or R3 .
However, we can use our ”rules” of series circuits to fill in blank spots on a horizontal row. In
this case, we can use the series rule of resistances to determine a total resistance from the sum
of individual resistances:
R1 R2 R3 Total
E 9 Volts
I Amps
R 3k 10k 5k 18k Ohms
Rule of series
circuits
RT = R1 + R2 + R3
Now, with a value for total resistance inserted into the rightmost (”Total”) column, we can
apply Ohm’s Law of I=E/R to total voltage and total resistance to arrive at a total current of
500 µA:
R1 R2 R3 Total
E 9 Volts
I 500µ Amps
Ohm’s
Law
Then, knowing that the current is shared equally by all components of a series circuit (another
”rule” of series circuits), we can fill in the currents for each resistor from the current figure just
calculated:
R1 R2 R3 Total
E 9 Volts
I 500µ 500µ 500µ 500µ Amps
Rule of series
circuits
IT = I1 = I2 = I3
Finally, we can use Ohm’s Law to determine the voltage drop across each resistor, one column
at a time:
278
R1 R2 R3 Total
E 1.5 5 2.5 9 Volts
I 500µ 500µ 500µ 500µ Amps
Ohm’s Ohm’s Ohm’s

Law Law Law
14.18 Simple parallel circuits

Let’s start with a parallel circuit consisting of three resistors and a single battery:
1 2 3 4
+
9V R1 R2 R3
- 10 kΩ 2 kΩ 1 kΩ
8 7 6 5
The first principle to understand about parallel circuits is that the voltage is equal across all
components in the circuit. This is because there are only two sets of electrically common points
in a parallel circuit, and voltage measured between sets of common points must always be the
same at any given time. Therefore, in the above circuit, the voltage across R 1 is equal to the
voltage across R2 which is equal to the voltage across R3 which is equal to the voltage across the
battery. This equality of voltages can be represented in another table for our starting values:
R1 R2 R3 Total
E 9 9 9 9 Volts
I Amps
R 10k 2k 1k Ohms
Just as in the case of series circuits, the same caveat for Ohm’s Law applies: values for
voltage, current, and resistance must be in the same context in order for the calculations to work
correctly. However, in the above example circuit, we can immediately apply Ohm’s Law to each
resistor to find its current because we know the voltage across each resistor (9 volts) and the
resistance of each resistor:
279
ER1 ER2 ER3
IR1 = IR2 = IR3 =
R1 R2 R3
9V
IR1 = = 0.9 mA
10 kΩ
9V
IR2 = = 4.5 mA
2 kΩ
9V
IR3 = = 9 mA
1 kΩ
R1 R2 R3 Total
E 9 9 9 9 Volts
I 0.9m 4.5m 9m Amps
R 10k 2k 1k Ohms
Ohm’s Ohm’s Ohm’s

Law Law Law
At this point we still don’t know what the total current or total resistance for this parallel
circuit is, so we can’t apply Ohm’s Law to the rightmost (”Total”) column. However, if we think
carefully about what is happening it should become apparent that the total current must equal
the sum of all individual resistor (”branch”) currents:
1 2 3 4
+ IT
IR1 IR2 IR3
9V R1 R2 R3
- 10 kΩ 2 kΩ 1 kΩ
IT
8 7 6 5
As the total current exits the negative (-) battery terminal at point 8 and travels through
the circuit, some of the flow splits off at point 7 to go up through R1 , some more splits off at
point 6 to go up through R2 , and the remainder goes up through R3 . Like a river branching into
several smaller streams, the combined flow rates of all streams must equal the flow rate of the
whole river. The same thing is encountered where the currents through R1 , R2 , and R3 join to
flow back to the positive terminal of the battery (+) toward point 1: the flow of electrons from
point 2 to point 1 must equal the sum of the (branch) currents through R1 , R2 , and R3 .
This is the second principle of parallel circuits: the total circuit current is equal to the sum
of the individual branch currents. Using this principle, we can fill in the IT spot on our table
with the sum of IR1 , IR2 , and IR3 :
280
R1 R2 R3 Total
E 9 9 9 9 Volts
I 0.9m 4.5m 9m 14.4m Amps
R 10k 2k 1k Ohms
Rule of parallel
circuits
Itotal = I1 + I2 + I3
Finally, applying Ohm’s Law to the rightmost (”Total”) column, we can calculate the total
circuit resistance:
R1 R2 R3 Total
E 9 9 9 9 Volts
I 0.9m 4.5m 9m 14.4m Amps
R 10k 2k 1k 625 Ohms
Etotal 9V Ohm’s
Rtotal = = = 625 Ω
Itotal 14.4 mA Law
Please note something very important here. The total circuit resistance is only 625 Ω: less
than any one of the individual resistors. In the series circuit, where the total resistance was
the sum of the individual resistances, the total was bound to be greater than any one of the
resistors individually. Here in the parallel circuit, however, the opposite is true: we say that
the individual resistances diminish rather than add to make the total. This principle completes
our triad of ”rules” for parallel circuits, just as series circuits were found to have three rules for
voltage, current, and resistance. Mathematically, the relationship between total resistance and
individual resistances in a parallel circuit looks like this:
1
Rtotal =
1 1 1
+ +
R1 R2 R3
The same basic form of equation works for any number of resistors connected together in par-
allel, just add as many 1/R terms on the denominator of the fraction as needed to accommodate
all parallel resistors in the circuit.
14.19 Power calculations

When calculating the power dissipation of resistive components, use any one of the three power
equations to derive and answer from values of voltage, current, and/or resistance pertaining to
each component:
281
Power equations
E2
P = IE P= P = I2R
R
This is easily managed by adding another row to our familiar table of voltages, currents, and
resistances:
R1 R2 R3 Total
E Volts
I Amps
R Ohms
P Watts
Power for any particular table column can be found by the appropriate Ohm’s Law equation
(appropriate based on what figures are present for E, I, and R in that column).
An interesting rule for total power versus individual power is that it is additive for any
configuration of circuit: series, parallel, series/parallel, or otherwise. Power is a measure of rate
of work, and since power dissipated must equal the total power applied by the source(s) (as
per the Law of Conservation of Energy in physics), circuit configuration has no effect on the
mathematics.
14.20 Correct use of Ohm’s Law

When working through worked examples it is important to try to figure out what you are doing
correctly as well as what you are doing wrong. Make sure you don’t stop doing the good things
and try to correct the mistakes.
Circuit questions form a large part of high school and early university courses and it is
important to understand the concepts properly. One common mistake which students make
we’ll discuss here so you know to look out for it when you are working through examples and
studying.
When applying Ohm’s Laws students often mix up the contexts of voltage, current, and
resistance. This means a student might mistakenly use a value for I through one resistor and the
value for V across another resistor or a set of connected resistors.
Remember this important rule: The variables used in Ohm’s Law equations must be
common to the same two points in the circuit under consideration. This is especially important
in series-parallel combination circuits where nearby components may have different values for
both voltage drop and current.
When using Ohm’s Law to calculate a variable for a single component:
• be sure the voltage you’re using is solely across that single component and
• the current you’re referencing is solely through that single component and
• the resistance you’re referencing is solely for that single component.
When calculating a variable for a set of components in a circuit, be sure that the voltage,
current, and resistance values are specific to that complete set of components only!
282
A good way to remember this is to pay close attention to the two points on either side of
the component or set of components. Making sure that the voltage in question is across those
two points, that the current in question is the electron flow from one of those points all the way
to the other point, that the resistance in question is the equivalent of a single resistor between
those two points, and that the power in question is the total power dissipated by all components
between those two points.
The ”table” method presented for both series and parallel circuits in this chapter is a way to
keep the components correct when using Ohm’s Law. In a table like the one shown below, you
are only allowed to apply an Ohm’s Law equation for the values of a single vertical column at a
time:
R1 R2 R3 Total
E Volts
I Amps
R Ohms
P Watts
Ohm’s Ohm’s Ohm’s Ohm’s

Law Law Law Law
Deriving values horizontally across columns is allowable as per the principles of series and
parallel circuits:
For series circuits:
R1 R2 R3 Total
E Add Volts
I Equal Amps
R Add Ohms
P Add Watts
Etotal = E1 + E2 + E3
Itotal = I1 = I2 = I3
Rtotal = R1 + R2 + R3
Ptotal = P1 + P2 + P3
283
For parallel circuits:
R1 R2 R3 Total
E Equal Volts
I Add Amps
R Diminish Ohms
P Add Watts
Etotal = E1 = E2 = E3
Itotal = I1 + I2 + I3
1
Rtotal =
1 1 1
+ +
R1 R2 R3
Ptotal = P1 + P2 + P3
The ”table” method helps to keep track of all relevant quantities. It also facilitates cross-
checking of answers by making it easy to solve for the original unknown variables through other
methods, or by working backwards to solve for the initially given values from your solutions.
For example, if you have just solved for all unknown voltages, currents, and resistances in a
circuit, you can check your work by adding a row at the bottom for power calculations on each
resistor, seeing whether or not all the individual power values add up to the total power. If not,
then you must have made a mistake somewhere! While this technique of ”cross-checking” your
work is nothing new, using the table to arrange all the data for the cross-check(s) results in a
minimum of confusion.
Aside: Although checking your work might not be fun when you have just worked
hard on the problem the benefits are great. Coming back to a problem after a
small break (trying another problem) often helps to find simple mistakes. If you
have done all the work then finding a simple mistake will be quick to fix because
you know exactly what you need to do. Also if you start finding mistakes while
checking you’ll build a mental list and find that you’ll stop making them after a
while.
Do it and you’ll find it will pay off !
14.21 Conductor size

The width of a conductor affects the flow of electrons through it. The broader the cross-sectional
area (thickness or area of a sl) of the conductor, the more room for electrons to flow, and
consequently, the easier it is for flow to occur (less resistance).
Electrical wire is usually round in cross-section (although there are some unique exceptions
to this rule), and comes in two basic varieties: solid and stranded. Solid copper wire is just as it
sounds: a single, solid strand of copper the whole length of the wire. Stranded wire is composed
of smaller strands of solid copper wire twisted together to form a single, larger conductor. The
greatest benefit of stranded wire is its mechanical flexibility, being able to withstand repeated
284
bending and twisting much better than solid copper (which tends to fatigue and break after
time).
14.22 Fuses
Normally, the ampacity rating of a conductor is a circuit design limit never to be intentionally
exceeded, but there is an application where ampacity exceedence is expected: in the case of fuses.
A fuse is nothing more than a short length of wire designed to melt and separate in the event
of excessive current. Fuses are always connected in series with the component(s) to be protected
from overcurrent, so that when the fuse blows (opens) it will open the entire circuit and stop
current through the component(s). A fuse connected in one branch of a parallel circuit, of course,
would not affect current through any of the other branches.
Normally, the thin piece of fuse wire is contained within a safety sheath to minimize hazards
of arc blast if the wire burns open with violent force, as can happen in the case of severe
overcurrents. In the case of small automotive fuses, the sheath is transparent so that the fusible
element can be visually inspected. Residential wiring used to commonly employ screw-in fuses
with glass bodies and a thin, narrow metal foil strip in the middle.
Units
or
Table 14.1: Units used in Electricity and Magnetism
• REVIEW:
• A circuit is an unbroken loop of conductive material that allows electrons to flow through
continuously without beginning or end.
• If a circuit is ”broken,” that means it’s conductive elements no longer form a complete
path, and continuous electron flow cannot occur in it.
• The location of a break in a circuit is irrelevant to its inability to sustain continuous electron
flow. Any break, anywhere in a circuit prevents electron flow throughout the circuit.
• REVIEW:
• Electrons can be motivated to flow through a conductor by a the same force manifested in
static electricity.
• Voltage is the measure of specific potential energy (potential energy per unit charge) be-
tween two locations. In layman’s terms, it is the measure of ”push” available to motivate
electrons.
• Voltage, as an expression of potential energy, is always relative between two locations, or
points. Sometimes it is called a voltage ”drop.”
285
• When a voltage source is connected to a circuit, the voltage will cause a uniform flow of
electrons through that circuit called a current.
• In a single (one loop) circuit, the amount current of current at any point is the same as
the amount of current at any other point.
• If a circuit containing a voltage source is broken, the full voltage of that source will appear
across the points of the break.
• The +/- orientation a voltage drop is called the polarity. It is also relative between two
points.
• REVIEW:
• Resistance is the measure of opposition to electric current.
• A short circuit is an electric circuit offering little or no resistance to the flow of electrons.
Short circuits are dangerous with high voltage power sources because the high currents
encountered can cause large amounts of heat energy to be released.
• An open circuit is one where the continuity has been broken by an interruption in the path
for electrons to flow.
• A closed circuit is one that is complete, with good continuity throughout.
• A device designed to open or close a circuit under controlled conditions is called a switch.
• The terms ”open” and ”closed” refer to switches as well as entire circuits. An open switch
is one without continuity: electrons cannot flow through it. A closed switch is one that
provides a direct (low resistance) path for electrons to flow through.
• REVIEW:
• Connecting wires in a circuit are assumed to have zero resistance unless otherwise stated.
• Wires in a circuit can be shortened or lengthened without impacting the circuit’s function
– all that matters is that the components are attached to one another in the same sequence.
• Points directly connected together in a circuit by zero resistance (wire) are considered to
be electrically common.
• Electrically common points, with zero resistance between them, will have zero voltage
dropped between them, regardless of the magnitude of current (ideally).
• The voltage or resistance readings referenced between sets of electrically common points
will be the same.
• These rules apply to ideal conditions, where connecting wires are assumed to possess ab-
solutely zero resistance. In real life this will probably not be the case, but wire resistances
should be low enough so that the general principles stated here still hold.
• REVIEW:
• Power is additive in any configuration of resistive circuit: PT otal = P1 + P2 + . . . Pn
• REVIEW:
286
• When electrons flow through a conductor, a magnetic field will be produced around that
conductor.
• The left-hand rule states that the magnetic flux lines produced by a current-carrying wire
will be oriented the same direction as the curled fingers of a person’s left hand (in the
”hitchhiking” position), with the thumb pointing in the direction of electron flow.
• The magnetic field force produced by a current-carrying wire can be greatly increased by
shaping the wire into a coil instead of a straight line. If wound in a coil shape, the magnetic
field will be oriented along the axis of the coil’s length.
• The magnetic field force produced by an electromagnet (called the magnetomotive force,
or mmf), is proportional to the product (multiplication) of the current through the elec-
tromagnet and the number of complete coil ”turns” formed by the wire.
287
Chapter 15
Magnets and Electromagnetism
sectionPermanent magnets
Magnetism has been known to mankind for many thousands of years. Lodestone, a magnetized
form of the iron oxide mineral magnetite which has the property of attracting iron objects, is
referred to in old European and Asian historical records, around 800 BC in Europe and earlier
in the East, around 2600 BC. The root of the English word magnet is the Greek word magnes,
thought to be derived from Magnesia in Asia Minor, once an important source of lodestone.
Lodestone was used as a navigational compass as it was found to orient itself in a north-south
direction if left free to rotate by suspension on a string or on a float in water.
Interesting A compass is a navigational instrument for finding directions. It consists of a magnetised

Fact: pointer free to align itself accurately with Earth’s magnetic field. A compass provides a
known reference direction which is of great assistance in navigation. The cardinal points
are north, south, east and west. A compass can be used in conjunction with a clock and
a sextant to provide a very accurate navigation capability. This device greatly improved
maritime trade by making travel safer and more efficient.
A compass can be any magnetic device using a needle to indicate the direction of the
magnetic north of a planet’s magnetosphere. Any instrument with a magnetized bar or
needle turning freely upon a pivot and pointing in a northerly and southerly direction can
be considered a compass.
Aside: In 1269, Frenchmen Peter Peregrinus and Pierre de Maricourt, using

a compass and a lodestone, found that the magnetic force of the lodestone was
different at the opposite ends, which they defined to be the poles of the magnet.
Like poles of magnets repel one another whilst unlike poles attract. These poles always occur
in pairs. It is impossible to isolate a single pole. Breaking a piece of magnet in half results in
two pieces, each with it’s own pair of poles.
288
N magnet S
. . . after breaking in half . . .
N magnet S N magnet S
The Earth itself is a magnet. Its magnetic poles are approximately aligned along the Earth’s
axis of rotation. The magnitude of forces between the poles of magnets follows an inverse square
law; i. e. it varies inversely as the square of the distance of separation.
Magnetic forces are a result of magnetic fields. By placing a magnet underneath a piece
of paper and sprinkling iron filings on top one can map the magnetic field. The filings align
themselves parallel to the field. Magnetic fields can be represented by magnetic field lines which
are parallel to the magnetic field and whose spacing represents the relative strength of the
magnetic field. The strength of the magnetic field is referred to as the magnetic flux. Magnetic
field lines form closed loops. In a bar magnet magnetic field lines emerge at one pole and then
curve around to the other pole with the rest of the loop being inside the magnet.
magnetic field
N magnet S
As already said, opposite poles of a magnet attract each other and bringing them together
results in their magnetic field lines converging. Like poles of a magnet repel each other and
bringing them together results in their magnetic field lines diverging.
289
Ferromagnetism is a phenomenon exhibited by materials like iron, nickel or cobalt. These
materials are known as permanent magnets. They always magnetize so as to be attracted to a
magnet, regardless of which magnetic pole is brought toward the unmagnetized iron:
N iron S N magnet S
attraction
Interesting The cause of Earth’s magnetic field is not known for certain, but is possibly explained
Fact: by the dynamo theory. The magnetic field extends several tens of thousands of kilome-
ters into space. The field is approximately a magnetic dipole, with one pole near the
geographic north pole and the other near the geographic south pole. An imaginary line
joining the magnetic poles would be inclined by approximately 11.3 from the planet’s axis
of rotation. The location of the magnetic poles is not static but wanders as much as
several kilometers a year. The two poles wander independently of each other and are not
at exact opposite positions on the globe.
The Earth’s magnetic field reverses at intervals, ranging from tens of thousands to many
millions of years, with an average interval of 250,000 years. It is believed that this last
occurred some 780,000 years ago. The mechanism responsible for geomagnetic reversals
is not well understood. When the North reappears in the opposite direction, we would
interpret this as a reversal, whereas turning off and returning in the same direction is called
a geomagnetic excursion. At present, the overall geomagnetic field is becoming weaker
at a rate which would, if it continues, cause the field to disappear, albeit temporarily,
by about around 3000-4000 AD. The deterioration began roughly 150 years ago and has
accelerated in the past several years. So far the strength of the earth’s field has decreased
by 10 to 15 percent.
The ability of a ferromagnetic material tends to retain its magnetization after an external
field is removed is called it’s retentivity.
290
Paramagnetic materials are materials like aluminum or platinum which become magnetized
in an external magnetic field in a similar way to ferromagnetic materials but lose their magnetism
when the external magnetic field is removed.
Diamagnetism is exhibited by materials like copper or bismuth which become magnetized in
a magnetic field with a polarity opposite to the external magnetic field. Unlike iron, they are
slightly repelled by a magnet
S diamagnetic N N magnet S
material
repulsion
The cause of Earth’s magnetic field is not known for certain, but is possibly explained by the
dynamo theory. The magnetic field extends several tens of thousands of kilometers into space.
The field is approximately a magnetic dipole, with one pole near the geographic north pole and
the other near the geographic south pole. An imaginary line joining the magnetic poles would be
inclined by approximately 11.3 from the planet’s axis of rotation. The location of the magnetic
poles is not static but wanders as much as several kilometers a year. The two poles wander
independently of each other and are not at exact opposite positions on the globe. Currently the
south magnetic pole is further from the geographic south pole than than north magnetic pole is
from the north geographic pole.
The strength of the field at the Earth’s surface at this time ranges from less than 30 microtesla
(0.3 gauss) in an area including most of South America and South Africa to over 60 microtesla
(0.6 gauss) around the magnetic poles in northern Canada and south of Australia, and in part
of Siberia. The field is similar to that of a bar magnet, but this similarity is superficial. The
magnetic field of a bar magnet, or any other type of permanent magnet, is created by the
coordinated motions of electrons (negatively charged particles) within iron atoms. The Earth’s
core, however, is hotter than 1043 K, the temperature at which the orientations of electron
orbits within iron become randomized. Therefore the Earth’s magnetic field is not caused by
magnetised iron deposits, but mostly by electric currents (known as telluric currents). Another
feature that distinguishes the Earth magnetically from a bar magnet is its magnetosphere.
A magnetosphere is the region around an astronomical object, in which phenomena are
dominated by its magnetic field. Earth is surrounded by a magnetosphere, as are the magnetized
planets Jupiter, Saturn, Uranus and Neptune. Mercury is magnetized, but too weakly to trap
plasma. Mars has patchy surface magnetization.
The distant field of Earth is greatly modified by the solar wind, a hot outflow from the sun,
consisting of solar ions (mainly hydrogen) moving at about 400 km/s . Earth’s magnetic field
forms an obstacle to the solar wind.
The Earth’s magnetic field reverses at intervals, ranging from tens of thousands to many
millions of years, with an average interval of 250,000 years. It is believed that this last oc-
291
curred some 780,000 years ago. The mechanism responsible for geomagnetic reversals is not
well understood. When the North reappears in the opposite direction, we would interpret this
as a reversal, whereas turning off and returning in the same direction is called a geomagnetic
excursion. At present, the overall geomagnetic field is becoming weaker at a rate which would,
if it continues, cause the field to disappear, albeit temporarily, by about around 3000-4000 AD.
The deterioration began roughly 150 years ago and has accelerated in the past several years. So
far the strength of the earth’s field has decreased by 10 to 15 percent.
15.1 Electromagnetism
The discovery of the relationship between magnetism and electricity
was, like so many other scientific discoveries, stumbled upon almost
by accident. The Danish physicist Hans Christian Oersted was
lecturing one day in 1820 on the possibility of electricity
and magnetism being related to one another, and in the process
demonstrated it conclusively by experiment in front of his whole
class! By passing an electric current through a metal wire suspended
above a magnetic compass, Oersted was able to produce a definite
motion of the compass needle in response to the current. What began
as conjecture at the start of the class session was confirmed as fact
at the end. Needless to say, Oersted had to revise his lecture notes
for future classes! His serendipitous discovery paved the way for a
whole new branch of science: electromagnetics.
Detailed experiments showed that the magnetic field produced by an electric current is always
oriented perpendicular to the direction of flow. A simple method of showing this relationship
is called the left-hand rule. Simply stated, the left-hand rule says that the magnetic flux lines
produced by a current-carrying wire will be oriented the same direction as the curled fingers of
a person’s left hand (in the ”hitchhiking” position), with the thumb pointing in the direction of
electron flow:
The "left-hand" rule
I I
I I
The magnetic field encircles this straight piece of current-carrying wire, the magnetic flux
lines having no definite ”north” or ”south’ poles.
(NOTE TO SELF: Need to add wires attracting or wires repelling)
While the magnetic field surrounding a current-carrying wire is indeed interesting, it is quite
weak for common amounts of current, able to deflect a compass needle and not much more. To
292
create a stronger magnetic field force (and consequently, more field flux) with the same amount of
electric current, we can wrap the wire into a coil shape, where the circling magnetic fields around
the wire will join to create a larger field with a definite magnetic (north and south) polarity:
S N
magnetic field
The amount of magnetic field force generated by a coiled wire is proportional to the current
through the wire multiplied by the number of ”turns” or ”wraps” of wire in the coil. This field
force is called magnetomotive force (mmf), and is very much analogous to electromotive force
(E) in an electric circuit.
An electromagnet is a piece of wire intended to generate a magnetic field with the passage of
electric current through it. Though all current-carrying conductors produce magnetic fields, an
electromagnet is usually constructed in such a way as to maximize the strength of the magnetic
field it produces for a special purpose. Electromagnets find frequent application in research,
industry, medical, and consumer products.
As an electrically-controllable magnet, electromagnets find application in a wide variety of
”electromechanical” devices: machines that effect mechanical force or motion through electrical
power. Perhaps the most obvious example of such a machine is the electric motor.
Relay
Applying current through the coil

causes the switch to close.
Relays can be constructed to actuate multiple switch contacts, or operate them in ”reverse”
(energizing the coil will open the switch contact, and unpowering the coil will allow it to spring
closed again).
293
Multiple-contact
relay
Relay with "normally-
closed" contact
15.2 Magnetic units of measurement

If the burden of two systems of measurement for common quantities (English vs. metric) throws
your mind into confusion, this is not the place for you! Due to an early lack of standardization
in the science of magnetism, we have been plagued with no less than three complete systems of
measurement for magnetic quantities.
First, we need to become acquainted with the various quantities associated with magnetism.
There are quite a few more quantities to be dealt with in magnetic systems than for electrical
systems. With electricity, the basic quantities are Voltage (E), Current (I), Resistance (R), and
Power (P). The first three are related to one another by Ohm’s Law (E=IR ; I=E/R ; R=E/I),
while Power is related to voltage, current, and resistance by Joule’s Law (P=IE ; P=I 2 R ;
P=E2 /R).
With magnetism, we have the following quantities to deal with:
Magnetomotive Force – The quantity of magnetic field force, or ”push.” Analogous to

electric voltage (electromotive force).
Field Flux – The quantity of total field effect, or ”substance” of the field. Analogous to
electric current.
Field Intensity – The amount of field force (mmf) distributed over the length of the elec-
tromagnet. Sometimes referred to as Magnetizing Force.
Flux Density – The amount of magnetic field flux concentrated in a given area.
Reluctance – The opposition to magnetic field flux through a given volume of space or
material. Analogous to electrical resistance.
Permeability – The specific measure of a material’s acceptance of magnetic flux, analogous

to the specific resistance of a conductive material (ρ), except inverse (greater permeability means
easier passage of magnetic flux, whereas greater specific resistance means more difficult passage
of electric current).
But wait . . . the fun is just beginning! Not only do we have more quantities to keep
track of with magnetism than with electricity, but we have several different systems of unit
measurement for each of these quantities. As with common quantities of length, weight, volume,
and temperature, we have both English and metric systems. However, there is actually more than
294
one metric system of units, and multiple metric systems are used in magnetic field measurements!
One is called the cgs, which stands for Centimeter-Gram-Second, denoting the root measures
upon which the whole system is based. The other was originally known as the mks system,
which stood for Meter-Kilogram-Second, which was later revised into another system, called
rmks, standing for Rationalized Meter-Kilogram-Second. This ended up being adopted as an
international standard and renamed SI (Systeme International).
Unit of Measurement
and abbreviation
Quantity Symbol
CGS SI English
Field Force mmf Gilbert (Gb) Amp-turn Amp-turn
Field Flux Φ Maxwell (Mx) Weber (Wb) Line
Field Amp-turns Amp-turns
Intensity H Oersted (Oe) per meter per inch
Flux Lines per

Density B Gauss (G) Tesla (T) square inch
Gilberts per Amp-turns Amp-turns

Reluctance ℜ Maxwell per Weber per line
Gauss per Tesla-meters Lines per

Permeability µ Oersted per Amp-turn inch-Amp-
turn
And yes, the µ symbol is really the same as the metric prefix ”micro.” I find this especially
confusing, using the exact same alphabetical character to symbolize both a specific quantity and
a general metric prefix!
As you might have guessed already, the relationship between field force, field flux, and re-
luctance is much the same as that between the electrical quantities of electromotive force (E),
current (I), and resistance (R). This provides something akin to an Ohm’s Law for magnetic
circuits:
A comparison of "Ohm’s Law" for
electric and magnetic circuits:
E = IR mmf = Φℜ
Electrical Magnetic
And, given that permeability is inversely analogous to specific resistance, the equation for
finding the reluctance of a magnetic material is very similar to that for finding the resistance of
a conductor:
A comparison of electrical
and magnetic opposition:
l l
R=ρ ℜ=
A µA
Electrical Magnetic
295
In either case, a longer piece of material provides a greater opposition, all other factors being
equal. Also, a larger cross-sectional area makes for less opposition, all other factors being equal.
15.3 Electromagnetic induction

While Oersted’s surprising discovery of electromagnetism paved the way for more practical ap-
plications of electricity, it was Michael Faraday who gave us the key to the practical generation
of electricity: electromagnetic induction. Faraday discovered that a voltage would be generated
across a length of wire if that wire was exposed to a perpendicular magnetic field flux of changing
intensity.
An easy way to create a magnetic field of changing intensity is to move a permanent magnet
next to a wire or coil of wire. Remember: the magnetic field must increase or decrease in intensity
perpendicular to the wire (so that the lines of flux ”cut across” the conductor), or else no voltage
will be induced:
Electromagnetic induction
current changes direction

with change in magnet motion
- + voltage changes polarity

V with change in magnet motion
+ -
magnet moved
back and forth
Faraday was able to mathematically relate the rate of change of the magnetic field flux with
induced voltage (note the use of a lower-case letter ”e” for voltage. This refers to instantaneous
voltage, or voltage at a specific point in time, rather than a steady, stable voltage.):
dΦ
e= N
dt
Where,
e = (Instantaneous) induced voltage in volts
N = Number of turns in wire coil (straight wire = 1)
Φ = Magnetic flux in Webers
t = Time in seconds
The ”d” terms are standard calculus notation, representing rate-of-change of flux over time.
296
”N” stands for the number of turns, or wraps, in the wire coil (assuming that the wire is formed
in the shape of a coil for maximum electromagnetic efficiency).
This phenomenon is put into obvious practical use in the construction of electrical generators,
which use mechanical power to move a magnetic field past coils of wire to generate voltage.
However, this is by no means the only practical use for this principle.
If we recall that the magnetic field produced by a current-carrying wire was always perpen-
dicular to that wire, and that the flux intensity of that magnetic field varied with the amount of
current through it, we can see that a wire is capable of inducing a voltage along its own length
simply due to a change in current through it. This effect is called self-induction: a changing
magnetic field produced by changes in current through a wire inducing voltage along the length
of that same wire. If the magnetic field flux is enhanced by bending the wire into the shape of a
coil, and/or wrapping that coil around a material of high permeability, this effect of self-induced
voltage will be more intense. A device constructed to take advantage of this effect is called an
inductor, and will be discussed in greater detail in the next chapter.
A device specifically designed to produce the effect of mutual inductance between two or
more coils is called a transformer.
Because magnetically-induced voltage only happens when the magnetic field flux is changing
in strength relative to the wire, mutual inductance between two coils can only happen with
alternating (changing – AC) voltage, and not with direct (steady – DC) voltage. The only
applications for mutual inductance in a DC system is where some means is available to switch
power on and off to the coil (thus creating a pulsing DC voltage), the induced voltage peaking
at every pulse.
A very useful property of transformers is the ability to transform voltage and current levels
according to a simple ratio, determined by the ratio of input and output coil turns. If the
energized coil of a transformer is energized by an AC voltage, the amount of AC voltage induced
in the unpowered coil will be equal to the input voltage multiplied by the ratio of output to
input wire turns in the coils. Conversely, the current through the windings of the output coil
compared to the input coil will follow the opposite ratio: if the voltage is increased from input
coil to output coil, the current will be decreased by the same proportion. This action of the
transformer is analogous to that of mechanical gear, belt sheave, or chain sprocket ratios:
297
Torque-reducing geartrain
Large gear
(many teeth)
Small gear
(few teeth)
+ +
low torque, high speed
high torque, low speed
"Step-down" transformer
high voltage
low voltage
AC voltage many
source turns few turns Load
high current
low current
A transformer designed to output more voltage than it takes in across the input coil is called a
”step-up” transformer, while one designed to do the opposite is called a ”step-down,” in reference
to the transformation of voltage that takes place. The current through each respective coil, of
course, follows the exact opposite proportion.
15.4 AC
Most students of electricity begin their study with what is known as direct current (DC), which
is electricity flowing in a constant direction, and/or possessing a voltage with constant polarity.
DC is the kind of electricity made by a battery (with definite positive and negative terminals),
or the kind of charge generated by rubbing certain types of materials against each other.
As useful and as easy to understand as DC is, it is not the only ”kind” of electricity in
use. Certain sources of electricity (most notably, rotary electro-mechanical generators) naturally
produce voltages alternating in polarity, reversing positive and negative over time. Either as
a voltage switching polarity or as a current switching direction back and forth, this ”kind” of
electricity is known as Alternating Current (AC):
298
DIRECT CURRENT ALTERNATING CURRENT
(DC) (AC)
I I
I I
Whereas the familiar battery symbol is used as a generic symbol for any DC voltage source,
the circle with the wavy line inside is the generic symbol for any AC voltage source.
One might wonder why anyone would bother with such a thing as AC. It is true that in
some cases AC holds no practical advantage over DC. In applications where electricity is used to
dissipate energy in the form of heat, the polarity or direction of current is irrelevant, so long as
there is enough voltage and current to the load to produce the desired heat (power dissipation).
However, with AC it is possible to build electric generators, motors and power distribution
systems that are far more efficient than DC, and so we find AC used predominately across the
world in high power applications. To explain the details of why this is so, a bit of background
knowledge about AC is necessary.
If a machine is constructed to rotate a magnetic field around a set of stationary wire coils
with the turning of a shaft, AC voltage will be produced across the wire coils as that shaft
is rotated, in accordance with Faraday’s Law of electromagnetic induction. This is the basic
operating principle of an AC generator, also known as an alternator :
Alternator operation
Step #1 Step #2
N S
+ -
no current! I I
Load Load
Step #3 Step #4
S N
- +
no current! I I
Load Load
Notice how the polarity of the voltage across the wire coils reverses as the opposite poles of
299
the rotating magnet pass by. Connected to a load, this reversing voltage polarity will create a
reversing current direction in the circuit. The faster the alternator’s shaft is turned, the faster
the magnet will spin, resulting in an alternating voltage and current that switches directions
more often in a given amount of time.
While DC generators work on the same general principle of electromagnetic induction, their
construction is not as simple as their AC counterparts. With a DC generator, the coil of wire
is mounted in the shaft where the magnet is on the AC alternator, and electrical connections
are made to this spinning coil via stationary carbon ”brushes” contacting copper strips on the
rotating shaft. All this is necessary to switch the coil’s changing output polarity to the external
circuit so the external circuit sees a constant polarity:
(DC) Generator operation
Step #1 Step #2
N S N S N S N S
- +
- +
I
Load Load
Step #3 Step #4
N S N S N S N S
- +
- +
I
Load Load
The generator shown above will produce two pulses of voltage per revolution of the shaft,
both pulses in the same direction (polarity). In order for a DC generator to produce constant
voltage, rather than brief pulses of voltage once every 1/2 revolution, there are multiple sets
of coils making intermittent contact with the brushes. The diagram shown above is a bit more
simplified than what you would see in real life.
The problems involved with making and breaking electrical contact with a moving coil should
be obvious (sparking and heat), especially if the shaft of the generator is revolving at high speed.
If the atmosphere surrounding the machine contains flammable or explosive vapors, the practical
problems of spark-producing brush contacts are even greater. An AC generator (alternator) does
not require brushes and commutators to work, and so is immune to these problems experienced
by DC generators.
The benefits of AC over DC with regard to generator design is also reflected in electric
motors. While DC motors require the use of brushes to make electrical contact with moving
coils of wire, AC motors do not. In fact, AC and DC motor designs are very similar to their
300
generator counterparts (identical for the sake of this tutorial), the AC motor being dependent
upon the reversing magnetic field produced by alternating current through its stationary coils of
wire to rotate the rotating magnet around on its shaft, and the DC motor being dependent on
the brush contacts making and breaking connections to reverse current through the rotating coil
every 1/2 rotation (180 degrees).
So we know that AC generators and AC motors tend to be simpler than DC generators
and DC motors. This relative simplicity translates into greater reliability and lower cost of
manufacture. But what else is AC good for? Surely there must be more to it than design details
of generators and motors! Indeed there is. There is an effect of electromagnetism known as
mutual induction, whereby two or more coils of wire placed so that the changing magnetic field
created by one induces a voltage in the other. If we have two mutually inductive coils and we
energize one coil with AC, we will create an AC voltage in the other coil. When used as such,
this device is known as a transformer :
Transformer
AC Induced AC
voltage voltage
source
The fundamental significance of a transformer is its ability to step voltage up or down from
the powered coil to the unpowered coil. The AC voltage induced in the unpowered (”secondary”)
coil is equal to the AC voltage across the powered (”primary”) coil multiplied by the ratio of
secondary coil turns to primary coil turns. If the secondary coil is powering a load, the current
through the secondary coil is just the opposite: primary coil current multiplied by the ratio of
primary to secondary turns. This relationship has a very close mechanical analogy, using torque
and speed to represent voltage and current, respectively:
301
Speed multiplication geartrain
Large gear
(many teeth)
Small gear
(few teeth)
high torque + low torque

low speed + high speed
"Step-down" transformer
high voltage
low voltage
AC voltage many
source turns few turns Load
high current
low current
If the winding ratio is reversed so that the primary coil has less turns than the secondary
coil, the transformer ”steps up” the voltage from the source level to a higher level at the load:
Speed reduction geartrain
Large gear
(many teeth)
Small gear
(few teeth)
low torque + high torque

high speed + low speed
"Step-up" transformer
high voltage
low voltage
AC voltage many turns
source few turns Load
high current
low current
The transformer’s ability to step AC voltage up or down with ease gives AC an advantage
unmatched by DC in the realm of power distribution. When transmitting electrical power over
long distances, it is far more efficient to do so with stepped-up voltages and stepped-down currents
302
(smaller-diameter wire with less resistive power losses), then step the voltage back down and the
current back up for industry, business, or consumer use use.
high voltage
Power Plant
Step-up
. . . to other customers
low voltage
Step-down
Home or
Business low voltage
Transformer technology has made long-range electric power distribution practical. Without
the ability to efficiently step voltage up and down, it would be cost-prohibitive to construct power
systems for anything but close-range (within a few miles at most) use.
As useful as transformers are, they only work with AC, not DC. Because the phenomenon of
mutual inductance relies on changing magnetic fields, and direct current (DC) can only produce
steady magnetic fields, transformers simply will not work with direct current. Of course, direct
current may be interrupted (pulsed) through the primary winding of a transformer to create
a changing magnetic field (as is done in automotive ignition systems to produce high-voltage
spark plug power from a low-voltage DC battery), but pulsed DC is not that different from AC.
Perhaps more than any other reason, this is why AC finds such widespread application in power
systems.
If we were to follow the changing voltage produced by a coil in an alternator from any point
on the sine wave graph to that point when the wave shape begins to repeat itself, we would
have marked exactly one cycle of that wave. This is most easily shown by spanning the distance
between identical peaks, but may be measured between any corresponding points on the graph.
The degree marks on the horizontal axis of the graph represent the domain of the trigonometric
sine function, and also the angular position of our simple two-pole alternator shaft as it rotates:
one wave cycle
0 90 180 270 360 90 180 270 360

(0) (0)
one wave cycle
Alternator shaft
position (degrees)
Since the horizontal axis of this graph can mark the passage of time as well as shaft position
in degrees, the dimension marked for one cycle is often measured in a unit of time, most often
seconds or fractions of a second. When expressed as a measurement, this is often called the
period of a wave. The period of a wave in degrees is always 360, but the amount of time one
period occupies depends on the rate voltage oscillates back and forth.
A more popular measure for describing the alternating rate of an AC voltage or current wave
than period is the rate of that back-and-forth oscillation. This is called frequency. The modern
303
unit for frequency is the Hertz (abbreviated Hz), which represents the number of wave cycles
completed during one second of time. In the United States of America, the standard power-line
frequency is 60 Hz, meaning that the AC voltage oscillates at a rate of 60 complete back-and-
forth cycles every second. In Europe, where the power system frequency is 50 Hz, the AC voltage
only completes 50 cycles every second. A radio station transmitter broadcasting at a frequency
of 100 MHz generates an AC voltage oscillating at a rate of 100 million cycles every second.
Prior to the canonization of the Hertz unit, frequency was simply expressed as ”cycles per
second.” Older meters and electronic equipment often bore frequency units of ”CPS” (Cycles
Per Second) instead of Hz. Many people believe the change from self-explanatory units like
CPS to Hertz constitutes a step backward in clarity. A similar change occurred when the unit
of ”Celsius” replaced that of ”Centigrade” for metric temperature measurement. The name
Centigrade was based on a 100-count (”Centi-”) scale (”-grade”) representing the melting and
boiling points of H2 O, respectively. The name Celsius, on the other hand, gives no hint as to
the unit’s origin or meaning.
Period and frequency are mathematical reciprocals of one another. That is to say, if a wave
has a period of 10 seconds, its frequency will be 0.1 Hz, or 1/10 of a cycle per second:
1
Frequency in Hertz =
Period in seconds
An instrument called an oscilloscope is used to display a changing voltage over time on a
graphical screen. You may be familiar with the appearance of an ECG or EKG (electrocar-
diograph) machine, used by physicians to graph the oscillations of a patient’s heart over time.
The ECG is a special-purpose oscilloscope expressly designed for medical use. General-purpose
oscilloscopes have the ability to display voltage from virtually any voltage source, plotted as a
graph with time as the independent variable. The relationship between period and frequency
is very useful to know when displaying an AC voltage or current waveform on an oscilloscope
screen. By measuring the period of the wave on the horizontal axis of the oscilloscope screen
and reciprocating that time value (in seconds), you can determine the frequency in Hertz.
OSCILLOSCOPE
vertical
Y
DC GND AC
V/div
trigger
16 divisions timebase
@ 1ms/div = 1m
a period of 16 ms X
DC GND AC
s/div
1 1
Frequency = = = 62.5 Hz
period 16 ms
Voltage and current are by no means the only physical variables subject to variation over
time. Much more common to our everyday experience is sound, which is nothing more than
304
the alternating compression and decompression (pressure waves) of air molecules, interpreted by
our ears as a physical sensation. Because alternating current is a wave phenomenon, it shares
many of the properties of other wave phenomena, like sound. For this reason, sound (especially
structured music) provides an excellent analogy for relating AC concepts.
In musical terms, frequency is equivalent to pitch. Low-pitch notes such as those produced
by a tuba or bassoon consist of air molecule vibrations that are relatively slow (low frequency).
High-pitch notes such as those produced by a flute or whistle consist of the same type of vibrations
in the air, only vibrating at a much faster rate (higher frequency). Here is a table showing the
actual frequencies for a range of common musical notes:
Note Musical designation Frequency (in hertz)
A A1 220.00
# b
A sharp (or B flat) A or B 233.08
B B1 246.94
C (middle) C 261.63
# b
C sharp (or D flat) C or D 277.18
D D 293.66
# b
D sharp (or E flat) D or E 311.13
E E 329.63
F F 349.23
# b
F sharp (or G flat) F or G 369.99
G G 392.00
# b
G sharp (or A flat) G or A 415.30
A A 440.00
A sharp (or B flat) A# or Bb 466.16
B B 493.88
C C1 523.25
Astute observers will notice that all notes on the table bearing the same letter designation
are related by a frequency ratio of 2:1. For example, the first frequency shown (designated with
the letter ”A”) is 220 Hz. The next highest ”A” note has a frequency of 440 Hz – exactly twice as
many sound wave cycles per second. The same 2:1 ratio holds true for the first A sharp (233.08
Hz) and the next A sharp (466.16 Hz), and for all note pairs found in the table.
Audibly, two notes whose frequencies are exactly double each other sound remarkably similar.
This similarity in sound is musically recognized, the shortest span on a musical scale separating
such note pairs being called an octave. Following this rule, the next highest ”A” note (one octave
above 440 Hz) will be 880 Hz, the next lowest ”A” (one octave below 220 Hz) will be 110 Hz. A
view of a piano keyboard helps to put this scale into perspective:
305
C# D# F# G# A# C# D# F# G# A# C# D# F# G# A#
Db Eb Gb Ab Bb Db Eb Gb Ab Bb Db Eb Gb Ab Bb
C D E F G A B C D E F G A B C D E F G A B
one octave
As you can see, one octave is equal to eight white keys’ worth of distance on a piano key-
board. The familiar musical mnemonic (doe-ray-mee-fah-so-lah-tee-doe) – yes, the same pattern
immortalized in the whimsical Rodgers and Hammerstein song sung in The Sound of Music –
covers one octave from C to C.
While electromechanical alternators and many other physical phenomena naturally produce
sine waves, this is not the only kind of alternating wave in existence. Other ”waveforms” of AC
are commonly produced within electronic circuitry. Here are but a few sample waveforms and
their common designations:
Square wave Triangle wave
one wave cycle one wave cycle
Sawtooth wave
These waveforms are by no means the only kinds of waveforms in existence. They’re simply
a few that are common enough to have been given distinct names. Even in circuits that are
supposed to manifest ”pure” sine, square, triangle, or sawtooth voltage/current waveforms, the
real-life result is often a distorted version of the intended waveshape. Some waveforms are so
complex that they defy classification as a particular ”type” (including waveforms associated
with many kinds of musical instruments). Generally speaking, any waveshape bearing close
resemblance to a perfect sine wave is termed sinusoidal, anything different being labeled as non-
sinusoidal. Being that the waveform of an AC voltage or current is crucial to its impact in a
circuit, we need to be aware of the fact that AC waves come in a variety of shapes.
306
15.5 Measurements of AC magnitude
So far we know that AC voltage alternates in polarity and AC current alternates in direction.
We also know that AC can alternate in a variety of different ways, and by tracing the alternation
over time we can plot it as a ”waveform.” We can measure the rate of alternation by measuring
the time it takes for a wave to evolve before it repeats itself (the ”period”), and express this
as cycles per unit time, or ”frequency.” In music, frequency is the same as pitch, which is the
essential property distinguishing one note from another.
However, we encounter a measurement problem if we try to express how large or small an
AC quantity is. With DC, where quantities of voltage and current are generally stable, we have
little trouble expressing how much voltage or current we have in any part of a circuit. But how
do you grant a single measurement of magnitude to something that is constantly changing?
One way to express the intensity, or magnitude (also called the amplitude), of an AC quantity
is to measure its peak height on a waveform graph. This is known as the peak or crest value of
an AC waveform:
Peak
Time
Another way is to measure the total height between opposite peaks. This is known as the
peak-to-peak (P-P) value of an AC waveform:
Peak-to-Peak
Time
Unfortunately, either one of these expressions of waveform amplitude can be misleading when
comparing two different types of waves. For example, a square wave peaking at 10 volts is
obviously a greater amount of voltage for a greater amount of time than a triangle wave peaking
at 10 volts. The effects of these two AC voltages powering a load would be quite different:
307
10 V
Time
10 V more heat energy

(peak) dissipated
(same load resistance)
10 V less heat energy

(peak) dissipated
One way of expressing the amplitude of different waveshapes in a more equivalent fashion is to
mathematically average the values of all the points on a waveform’s graph to a single, aggregate
number. This amplitude measure is known simply as the average value of the waveform. If
we average all the points on the waveform algebraically (that is, to consider their sign, either
positive or negative), the average value for most waveforms is technically zero, because all the
positive points cancel out all the negative points over a full cycle:
+ ++
+ +
+ +
+ +
- -
- -
- -
- - -
True average value of all points
(considering their signs) is zero!
This, of course, will be true for any waveform having equal-area portions above and below the
”zero” line of a plot. However, as a practical measure of a waveform’s aggregate value, ”average”
is usually defined as the mathematical mean of all the points’ absolute values over a cycle. In
other words, we calculate the practical average value of the waveform by considering all points
on the wave as positive quantities, as if the waveform looked like this:
308
+ ++ + ++
+ + + +
+ + + +
+ ++ +
Practical average of points, all

values assumed to be positive.
Polarity-insensitive mechanical meter movements (meters designed to respond equally to the
positive and negative half-cycles of an alternating voltage or current) register in proportion to
the waveform’s (practical) average value, because the inertia of the pointer against the tension
of the spring naturally averages the force produced by the varying voltage/current values over
time. Conversely, polarity-sensitive meter movements vibrate uselessly if exposed to AC voltage
or current, their needles oscillating rapidly about the zero mark, indicating the true (algebraic)
average value of zero for a symmetrical waveform. When the ”average” value of a waveform is
referenced in this text, it will be assumed that the ”practical” definition of average is intended
unless otherwise specified.
Another method of deriving an aggregate value for waveform amplitude is based on the
waveform’s ability to do useful work when applied to a load resistance. Unfortunately, an AC
measurement based on work performed by a waveform is not the same as that waveform’s ”av-
erage” value, because the power dissipated by a given load (work performed per unit time) is
not directly proportional to the magnitude of either the voltage or current impressed upon it.
Rather, power is proportional to the square of the voltage or current applied to a resistance (P
= E2 /R, and P = I2 R). Although the mathematics of such an amplitude measurement might
not be straightforward, the utility of it is.
Consider a bandsaw and a jigsaw, two pieces of modern woodworking equipment. Both
types of saws cut with a thin, toothed, motor-powered metal blade to cut wood. But while
the bandsaw uses a continuous motion of the blade to cut, the jigsaw uses a back-and-forth
motion. The comparison of alternating current (AC) to direct current (DC) may be likened to
the comparison of these two saw types:
Bandsaw
Jigsaw
blade
motion
wood
wood
blade
motion
(analogous to DC) (analogous to AC)

The problem of trying to describe the changing quantities of AC voltage or current in a single,
aggregate measurement is also present in this saw analogy: how might we express the speed of
a jigsaw blade? A bandsaw blade moves with a constant speed, similar to the way DC voltage
pushes or DC current moves with a constant magnitude. A jigsaw blade, on the other hand,
moves back and forth, its blade speed constantly changing. What is more, the back-and-forth
motion of any two jigsaws may not be of the same type, depending on the mechanical design
309
of the saws. One jigsaw might move its blade with a sine-wave motion, while another with a
triangle-wave motion. To rate a jigsaw based on its peak blade speed would be quite misleading
when comparing one jigsaw to another (or a jigsaw with a bandsaw!). Despite the fact that these
different saws move their blades in different manners, they are equal in one respect: they all cut
wood, and a quantitative comparison of this common function can serve as a common basis for
which to rate blade speed.
Picture a jigsaw and bandsaw side-by-side, equipped with identical blades (same tooth pitch,
angle, etc.), equally capable of cutting the same thickness of the same type of wood at the
same rate. We might say that the two saws were equivalent or equal in their cutting capacity.
Might this comparison be used to assign a ”bandsaw equivalent” blade speed to the jigsaw’s
back-and-forth blade motion; to relate the wood-cutting effectiveness of one to the other? This
is the general idea used to assign a ”DC equivalent” measurement to any AC voltage or current:
whatever magnitude of DC voltage or current would produce the same amount of heat energy
dissipation through an equal resistance:
5 A RMS
50 W
power
10 V 2Ω dissipated
RMS
5 A RMS
Equal power dissipated through
equal resistance loads
5A
50 W
power
10 V 2Ω dissipated
5A
Suppose we were to wrap a coil of insulated wire around a loop of ferromagnetic material and
energize this coil with an AC voltage source:
iron core
wire
coil
As an inductor, we would expect this iron-core coil to oppose the applied voltage with its
inductive reactance, limiting current through the coil as predicted by the equations X L = 2πfL
and I=E/X (or I=E/Z). For the purposes of this example, though, we need to take a more
310
detailed look at the interactions of voltage, current, and magnetic flux in the device.
Kirchhoff’s voltage law describes how the algebraic sum of all voltages in a loop must equal
zero. In this example, we could apply this fundamental law of electricity to describe the respective
voltages of the source and of the inductor coil. Here, as in any one-source, one-load circuit, the
voltage dropped across the load must equal the voltage supplied by the source, assuming zero
voltage dropped along the resistance of any connecting wires. In other words, the load (inductor
coil) must produce an opposing voltage equal in magnitude to the source, in order that it may
balance against the source voltage and produce an algebraic loop voltage sum of zero. From
where does this opposing voltage arise? If the load were a resistor, the opposing voltage would
originate from the ”friction” of electrons flowing through the resistance of the resistor. With
a perfect inductor (no resistance in the coil wire), the opposing voltage comes from another
mechanism: the reaction to a changing magnetic flux in the iron core.
Michael Faraday discovered the mathematical relationship between magnetic flux (Φ) and
induced voltage with this equation:
dΦ
e= N
dt
Where,
e = (Instantaneous) induced voltage in volts
N = Number of turns in wire coil (straight wire = 1)
Φ = Magnetic flux in Webers
t = Time in seconds
The instantaneous voltage (voltage dropped at any instant in time) across a wire coil is equal
to the number of turns of that coil around the core (N) multiplied by the instantaneous rate-of-
change in magnetic flux (dΦ/dt) linking with the coil. Graphed, this shows itself as a set of sine
waves (assuming a sinusoidal voltage source), the flux wave 90o lagging behind the voltage wave:
e = voltage
Φ = magnetic flux
e Φ
Magnetic flux through a ferromagnetic material is analogous to current through a conductor:

it must be motivated by some force in order to occur. In electric circuits, this motivating force
is voltage (a.k.a. electromotive force, or EMF). In magnetic ”circuits,” this motivating force is
magnetomotive force, or mmf. Magnetomotive force (mmf) and magnetic flux (Φ) are related
to each other by a property of magnetic materials known as reluctance (the latter quantity
symbolized by a strange-looking letter ”R”):
311
A comparison of "Ohm’s Law" for
electric and magnetic circuits:
E = IR mmf = Φℜ
Electrical Magnetic
In our example, the mmf required to produce this changing magnetic flux (Φ) must be supplied
by a changing current through the coil. Magnetomotive force generated by an electromagnet coil
is equal to the amount of current through that coil (in amps) multiplied by the number of turns
of that coil around the core (the SI unit for mmf is the amp-turn). Because the mathematical
relationship between magnetic flux and mmf is directly proportional, and because the mathe-
matical relationship between mmf and current is also directly proportional (no rates-of-change
present in either equation), the current through the coil will be in-phase with the flux wave:
e = voltage
Φ = magnetic flux
i = coil current
e Φ
i
This is why alternating current through an inductor lags the applied voltage waveform by
90o : because that is what is required to produce a changing magnetic flux whose rate-of-change
produces an opposing voltage in-phase with the applied voltage. Due to its function in providing
magnetizing force (mmf) for the core, this current is sometimes referred to as the magnetizing
current.
It should be mentioned that the current through an iron-core inductor is not perfectly sinu-
soidal (sine-wave shaped), due to the nonlinear B/H magnetization curve of iron. In fact, if the
inductor is cheaply built, using as little iron as possible, the magnetic flux density might reach
high levels (approaching saturation), resulting in a magnetizing current waveform that looks
something like this:
e = voltage
Φ = magnetic flux
i = coil current
e Φ
i
When a ferromagnetic material approaches magnetic flux saturation, disproportionately greater

levels of magnetic field force (mmf) are required to deliver equal increases in magnetic field flux
(Φ). Because mmf is proportional to current through the magnetizing coil (mmf = NI, where ”N”
312
is the number of turns of wire in the coil and ”I” is the current through it), the large increases
of mmf required to supply the needed increases in flux results in large increases in coil current.
Thus, coil current increases dramatically at the peaks in order to maintain a flux waveform that
isn’t distorted, accounting for the bell-shaped half-cycles of the current waveform in the above
plot.
The situation is further complicated by energy losses within the iron core. The effects of
hysteresis and eddy currents conspire to further distort and complicate the current waveform,
making it even less sinusoidal and altering its phase to be lagging slightly less than 90 o behind
the applied voltage waveform. This coil current resulting from the sum total of all magnetic
effects in the core (dΦ/dt magnetization plus hysteresis losses, eddy current losses, etc.) is called
the exciting current. The distortion of an iron-core inductor’s exciting current may be minimized
if it is designed for and operated at very low flux densities. Generally speaking, this requires a
core with large cross-sectional area, which tends to make the inductor bulky and expensive. For
the sake of simplicity, though, we’ll assume that our example core is far from saturation and free
from all losses, resulting in a perfectly sinusoidal exciting current.
As we’ve seen already in the inductors chapter, having a current waveform 90 o out of phase
with the voltage waveform creates a condition where power is alternately absorbed and returned
to the circuit by the inductor. If the inductor is perfect (no wire resistance, no magnetic core
losses, etc.), it will dissipate zero power.
Let us now consider the same inductor device, except this time with a second coil wrapped
around the same iron core. The first coil will be labeled the primary coil, while the second will
be labeled the secondary:
iron core
wire
coil
wire
coil
If this secondary coil experiences the same magnetic flux change as the primary (which it
should, assuming perfect containment of the magnetic flux through the common core), and has
the same number of turns around the core, a voltage of equal magnitude and phase to the applied
voltage will be induced along its length. In the following graph, the induced voltage waveform
is drawn slightly smaller than the source voltage waveform simply to distinguish one from the
other:
313
ep = primary coil voltage
es = secondary coil voltage
Φ = magnetic flux
ip = primary coil current
ep Φ
es ip
314
Chapter 16
Electronics
(NOTE TO SELF: Mark: I have very little idea of how to make this flow, fit in or even how
best to explain any of it. All the content in here is just trawled from other GFDL projects:
www.wikipedia.com www.wikibooks.com The syllabus document has NO meaningful information
on this stuff.)
Electronics:
16.1 capacitive and inductive circuits

16.1.1 A capacitor
(NOTE TO SELF: If we are going to talk of capacitive circuits we need a definition of capacitor.)
A capacitor (historically known as a ”condenser”) is a device that stores energy in an electric
field, by accumulating an internal imbalance of electric charge. It is made of two conductors
separated by a dielectric (insulator). The problem of two parallel plates with a uniform electric
field between them is a capacitor.
When voltage exists one end of the capacitor is getting drained and the other end is getting
filled with charge. This is known as charging. Charging creates a charge imbalance between the
two plates and creates a reverse voltage that stops the capacitor from charging. This is why
when capacitors are first connected to voltage charge flows only to stop as the capacitor becomes
charged. When a capacitor is charged current stops flowing and it becomes an open circuit. It
is as if the capacitor gained infinite resistance.
Just as the capacitor charges it can be discharged.
16.1.2 An inductor
(NOTE TO SELF: If we are going to talk of inductive circuits we need a definition of a inductor)
An inductor is a device which stores energy in a magnetic field. Inductors are formed of a coil
of conductive material. When current flows through the wire it creates a magnetic field which
exists inside the coil. When the current stops the magnetic field gets less, but we have learnt
that a changing magnetic field induces a current in a wire. So when the current turns off the
magnetic field decreases inducing another current in the wire. As the field decreases in strength
so does the induced magnetic field.
Normally they are made of copper wire, but not always (Example: aluminum wire, or spiral
pattern etched on circuit board). The material around and within the coil affects its properties;
315
common types are air-core (only a coil of wire), iron-core, and ferrite core. Iron and ferrite types
are more efficient because they conduct the magnetic field much better than air; of the two,
ferrite is more efficient because stray electricity cannot flow through it.
Interesting Some inductors have more than a core, which is just a rod the coil is formed about.
Fact: Some are formed like transformers, using two E-shaped pieces facing each other, the
wires wound about the central leg of the E’s. The E’s are made of laminated iron/steel
or ferrite.
Important qualities of an inductor

There are several important properties for an inductor.
* Current carrying capacity is determined by wire thickness. * Q, or quality, is determined
by the uniformity of the windings, as well as the core material and how thoroughly it surrounds
the coil. * Last but not least, the inductance of the coil.
The inductance is determined by several factors.
* coil shape: short and squat is best * core material * windings: winding in opposite directions
will cancel out the inductance effect, and you will have only a resistor.
16.2 filters and signal tuning

(NOTE TO SELF: I think this relies on an understanding of second order ODEs and thats
beyond the scope of the maths syllabus - we can put something high level but there is no way
they’ll understand it properly - surely we should teach as little phenomonology as possible - the
waves chapter has a ton of it already)
16.3 active circuit elements, diode, LED and field effect

transistor, operational amplifier
16.3.1 Diode
A diode functions as the electronic version of a one-way valve. By restricting the direction of
movement of charge carriers, it allows an electric current to flow in one direction, but blocks it
in the opposite direction. It is a one-way street for current.
316
Diode behavior is analogous to the behavior of a hydraulic device called a check valve. A
check valve allows fluid flow through it in one direction only:
Check valves are essentially pressure-operated devices: they open and allow flow if the pres-
sure across them is of the correct ”polarity” to open the gate (in the analogy shown, greater fluid
pressure on the right than on the left). If the pressure is of the opposite ”polarity,” the pressure
difference across the check valve will close and hold the gate so that no flow occurs.
Like check valves, diodes are essentially ”pressure-” operated (voltage-operated) devices. The
essential difference between forward-bias and reverse-bias is the polarity of the voltage dropped
across the diode. Let’s take a closer look at the simple battery-diode-lamp circuit shown earlier,
this time investigating voltage drops across the various components:
317
When the diode is forward-biased and conducting current, there is a small voltage dropped
across it, leaving most of the battery voltage dropped across the lamp. When the battery’s
polarity is reversed and the diode becomes reverse-biased, it drops all of the battery’s voltage
and leaves none for the lamp. If we consider the diode to be a sort of self-actuating switch (closed
in the forward-bias mode and open in the reverse-bias mode), this behavior makes sense. The
most substantial difference here is that the diode drops a lot more voltage when conducting than
the average mechanical switch (0.7 volts versus tens of millivolts).
This forward-bias voltage drop exhibited by the diode is due to the action of the depletion
region formed by the P-N junction under the influence of an applied voltage. When there is no
voltage applied across a semiconductor diode, a thin depletion region exists around the region
of the P-N junction, preventing current through it. The depletion region is for the most part
devoid of available charge carriers and so acts as an insulator:
318
16.3.2 LED
A light-emitting diode (LED) is a semiconductor device that emits light when charge flows in
the correct direction through it. If you apply a voltage to force current to flow in the direction
the LED allows it will light up.
This notation of having two small arrows pointing away from the device is common to the
schematic symbols of all light-emitting semiconductor devices. Conversely, if a device is light-
activated (meaning that incoming light stimulates it), then the symbol will have two small arrows
pointing toward it. It is interesting to note, though, that LEDs are capable of acting as light-
sensing devices: they will generate a small voltage when exposed to light, much like a solar cell
on a small scale. This property can be gainfully applied in a variety of light-sensing circuits.
The color depends on the semiconducting material used to construct the LED, and can be in
the near-ultraviolet, visible or infrared part of the electromagnetic spectrum.
Interesting Nick Holonyak Jr. (1928 ) of the University of Illinois at Urbana-Champaign developed
Fact: the first practical visible-spectrum LED in 1962.
319
Physical function
Because LEDs are made of different chemical substances than normal rectifying diodes, their
forward voltage drops will be different. Typically, LEDs have much larger forward voltage drops
than rectifying diodes, anywhere from about 1.6 volts to over 3 volts, depending on the color.
Typical operating current for a standard-sized LED is around 20 mA. When operating an LED
from a DC voltage source greater than the LED’s forward voltage, a series-connected ”dropping”
resistor must be included to prevent full source voltage from damaging the LED. Consider this
example circuit:
With the LED dropping 1.6 volts, there will be 4.4 volts dropped across the resistor. Sizing
the resistor for an LED current of 20 mA is as simple as taking its voltage drop (4.4 volts)
and dividing by circuit current (20 mA), in accordance with Ohm’s Law (R=E/I). This gives
us a figure of 220 ?. Calculating power dissipation for this resistor, we take its voltage drop
and multiply by its current (P=IE), and end up with 88 mW, well within the rating of a 1/8
watt resistor. Higher battery voltages will require larger-value dropping resistors, and possibly
higher-power rating resistors as well. Consider this example for a supply voltage of 24 volts:
Here, the dropping resistor must be increased to a size of 1.12 k? in order to drop 22.4 volts
at 20 mA so that the LED still receives only 1.6 volts. This also makes for a higher resistor
power dissipation: 448 mW, nearly one-half a watt of power! Obviously, a resistor rated for 1/8
watt power dissipation or even 1/4 watt dissipation will overheat if used here.
Dropping resistor values need not be precise for LED circuits. Suppose we were to use a 1 k?
resistor instead of a 1.12 k? resistor in the circuit shown above. The result would be a slightly
greater circuit current and LED voltage drop, resulting in a brighter light from the LED and
slightly reduced service life. A dropping resistor with too much resistance (say, 1.5 k? instead
of 1.12 k?) will result in less circuit current, less LED voltage, and a dimmer light. LEDs are
quite tolerant of variation in applied power, so you need not strive for perfection in sizing the
dropping resistor.
Also because of their unique chemical makeup, LEDs have much, much lower peak-inverse
voltage (PIV) ratings than ordinary rectifying diodes. A typical LED might only be rated at
5 volts in reverse-bias mode. Therefore, when using alternating current to power an LED, you
should connect a protective rectifying diode in series with the LED to prevent reverse breakdown
every other half-cycle:
320
Light emission
The wavelength of the light emitted, and therefore its color, depends on the materials forming the
pn junction. A normal diode, typically made of silicon or germanium, emits invisible far-infrared
light (so it can’t be seen), but the materials used for an LED have emit light corresponding to
near-infrared, visible or near-ultraviolet frequencies.
Considerations in use
Unlike incandescent light bulbs, which can operate with either AC or DC, LEDs require a DC
supply of the correct electrical polarity. When the voltage across the pn junction is in the correct
direction, a significant current flows and the device is said to be forward biased. The voltage
across the LED in this case is fixed for a given LED and is proportional to the energy of the
emitted photons. If the voltage is of the wrong polarity, the device is said to be reverse biased,
very little current flows, and no light is emitted.
Because the voltage versus current characteristics of an LED are much like any diode, they
can be destroyed by connecting them to a voltage source much higher than their turn on voltage.
The voltage drop across a forward biased LED increases as the amount of light emitted
increases because of the optical power being radiated. One consequence is that LEDs of the
same type can be readily operated in parallel. The turn-on voltage of an LED is a function of
the color, a higher forward drop is associated with emitting higher energy (bluer) photons. The
reverse voltage that most LEDs can sustain without damage is usually only a few volts. Some
LED units contain two diodes, one in each direction and each a different color (typically red and
green), allowing two-color operation or a range of colors to be created by altering the percentage
of time the voltage is in each polarity.
LED materials
LED development began with infrared and red devices made with gallium arsenide. Advances
in materials science have made possible the production of devices with ever shorter wavelengths,
producing light in a variety of colors.
Conventional LEDs are made from a variety of inorganic minerals, producing the following
colors:
• aluminium gallium arsenide (AlGaAs): red and infrared
• gallium arsenide/phosphide (GaAsP): red, orange-red, orange, and yellow
• gallium nitride (GaN): green, pure green (or emerald green), and blue
• gallium phosphide (GaP): red, yellow and green
• zinc selenide (ZnSe): blue
321
• indium gallium nitride (InGaN): bluish-green and blue
• silicon carbide (SiC): blue
• diamond (C): ultraviolet
• silicon (Si) - under development
(NOTE TO SELF: The above list is taken from public sources, but at least one LED given
as blue does not produce blue light. (There is a good chance that almost none do, because of
the higher frequency of blue.) This is a common problem in daily life due to the majority of
mankind being ignorant of colour theory and conflating blue with light blue with cyan, the latter
often called ”sky blue”. A cyan LED may be distinguished from a blue LED in that adding a
yellow phosphor to the output makes green, rather than white light. And often aqua is called
blue-green when in actuality the latter is cyan, and light cyan-green would be aqua. What adds
to the confusion is that cyan LEDs are enclosed in blue plastic. A great amount of work is
needed to dispel these intuitive myths of colour mixing before accurate descriptions of physical
phenomena and their production can happen. - This needs to be sorted out)
Blue and white LEDs and Other colors

Commercially viable blue LEDs based invented by Shuji Nakamura while working in Japan at
Nichia Corporation in 1993 and became widely available in the late 1990s. They can be added
to existing red and green LEDs to produce white light.
Most ”white” LEDs in production today use a 450nm 470nm blue GaN (gallium nitride)
LED covered by a yellowish phosphor coating usually made of cerium doped yttrium aluminium
garnet (YAG:Ce) crystals which have been powdered and bound in a type of viscous adhesive.
The LED chip emits blue light, part of which is converted to yellow by the YAG:Ce. The single
crystal form of YAG:Ce is actually considered a scintillator rather than a phosphor. Since yellow
light stimulates the red and green receptors of the eye, the resulting mix of blue and yellow light
gives the appearance of white.
The newest method used to produce white light LEDs uses no phosphors at all and is based
on homoepitaxially grown zinc selenide (ZnSe) on a ZnSe substrate which simultaneously emits
blue light from its active region and yellow light from the substrate.
Other colors
Recent color developments include pink and purple. They consist of one or two phosphor layers
over a blue LED chip. The first phosphor layer of a pink LED is a yellow glowing one, and
the second phosphor layer is either red or orange glowing. Purple LEDs are blue LEDs with
an orange glowing phosphor over the chip. Some pink LEDs have run into issues. For example,
some are blue LEDs painted with fluorescent paint or fingernail polish that can wear off, and
some are white LEDs with a pink phosphor or dye that unfortunately fades after a short tme.
Ultraviolet, blue, pure green, white, pink and purple LEDs are relatively expensive compared
to the more common reds, oranges, greens, yellows and infrareds and are thus less commonly
used in commercial applications.
The semiconducting chip is encased in a solid plastic lens, which is much tougher than the
glass envelope of a traditional light bulb or tube. The plastic may be colored, but this is only
for cosmetic reasons and does not affect the color of the light emitted.
322
Operational parameters and efficiency
Most typical LEDs are designed to operate with no more than 30-60 milliwatts of electrical
power. It is projected that by 2005, 10-watt units will be available. These devices will produce
about as much light as a common 50-watt incandescent bulb, and will facilitate use of LEDs for
general illumination needs.
Interesting In September 2003 a new type of blue LED was demonstrated by the company Cree, Inc.
Fact: to have 35% efficiency at 20 mA. This produced a commercially packaged white light
having 65 lumens per watt at 20 mA, becoming the brightest white LED commercially
available at the time.
Organic light-emitting diodes (OLEDs)

If the emissive layer material of an LED is an organic compound, it is known as an Organic Light
Emitting Diode (OLED). To function as a semiconductor, the organic emissive material must
have conjugated pi bonds. The emissive material can be a small organic molecule in a crystalline
phase, or a polymer. Polymer materials can be flexible; such LEDs are known as PLEDs or
FLEDs.
Compared with regular LEDs, OLEDs are lighter and polymer LEDs can have the added
benefit of being flexible. Some possible future applications of OLEDs could be:
• Light sources
• Wall decorations
• Luminous cloth
LED applications
Here is a list of known applications for LEDs, some of which are further elaborated upon in the
following text:
• in general, commonly used as information indicators in various types of embedded systems

(many of which are listed below)
• thin, lightweight message displays, e.g. in public information signs (at airports and railway
stations, among other places)
• status indicators, e.g. on/off lights on professional instruments and consumers audio/video
equipment
• infrared LEDs in remote controls (for TVs, VCRs, etc)
• clusters in traffic signals, replacing ordinary bulbs behind colored glass
• car indicator lights and bicycle lighting; also for pedestrians to be seen by car traffic
323
• calculator and measurement instrument displays (seven segment displays), although now
mostly replaced by LCDs
• red or yellow LEDs are used in indicator and [alpha]numeric displays in environments where
night vision must be retained: aircraft cockpits, submarine and ship bridges, astronomy
observatories, and in the field, e.g. night time animal watching and military field use
• red or yellow LEDs are also used in photographic darkrooms, for providing lighting which
does not lead to unwanted exposure of the film
• illumination, e.g. flashlights (a.k.a. torches, UK), and backlights for LCD screens
• signaling/emergency beacons and strobes
• movement sensors, e.g. in mechanical and optical computer mice and trackballs
• in LED printers, e.g. high-end color printers
LEDs offer benefits in terms of maintenance and safety.
• The typical working lifetime of a device, including the bulb, is ten years, which is much
longer than the lifetimes of most other light sources.
• LEDs fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
• LEDs give off less heat than incandescent light bulbs and are less fragile than fluorescent
lamps.
• Since an individual device is smaller than a centimetre in length, LED-based light sources
used for illumination and outdoor signals are built using clusters of tens of devices.
Because they are monochromatic, LED lights have great power advantages over white lights
where a specific color is required. Unlike the white lights, the LED does not need a filter that
absorbs most of the emitted white light. Colored fluorescent lights are made, but they are not
widely available. LED lights are inherently colored, and are available in a wide range of colors.
One of the most recently introduced colors is the emerald green (bluish green, about 500 nm)
that meets the legal requirements for traffic signals and navigation lights.
Interesting The largest LED display in the world is 36 metres high (118 feet), at Times Square, New
Fact: York, U.S.A.
There are applications that specifically require light that does not contain any blue compo-
nent. Examples are photographic darkroom safe lights, illumination in laboratories where certain
photo-sensitive chemicals are used, and situations where dark adaptation (night vision) must be
preserved, such as cockpit and bridge illumination, observatories, etc. Yellow LED lights are a
good choice to meet these special requirements because the human eye is more sensitive to yellow
light.
324
16.3.3 Transistor
The transistor is a solid state semiconductor device used for amplification and switching, and
has three terminals. The transistor itself does not amplify current though, which is a common
misconception, but a small current or voltage applied to one terminal controls the current through
the other two, hence the term transistor; a voltage- or current-controlled resistor. It is the key
component in all modern electronics. In digital circuits, transistors are used as very fast electrical
switches, and arrangements of transistors can function as logic gates, RAM-type memory and
other devices. In analog circuits, transistors are essentially used as amplifiers.
Transistor was also the common name in the sixties for a transistor radio, a pocket-sized
portable radio that utilized transistors (rather than vacuum tubes) as its active electronics. This
is still one of the dictionary definitions of transistor.
The only functional difference between a PNP transistor and an NPN transistor is the proper
biasing (polarity) of the junctions when operating. For any given state of operation, the current
directions and voltage polarities for each type of transistor are exactly opposite each other.
Bipolar transistors work as current-controlled current regulators. In other words, they restrict
the amount of current that can go through them according to a smaller, controlling current. The
main current that is controlled goes from collector to emitter, or from emitter to collector,
depending on the type of transistor it is (PNP or NPN, respectively). The small current that
controls the main current goes from base to emitter, or from emitter to base, once again depending
on the type of transistor it is (PNP or NPN, respectively). According to the confusing standards
of semiconductor symbology, the arrow always points against the direction of electron flow:
325
Bipolar transistors are called bipolar because the main flow of electrons through them takes
place in two types of semiconductor material: P and N, as the main current goes from emitter
to collector (or visa-versa). In other words, two types of charge carriers – electrons and holes –
comprise this main current through the transistor.
As you can see, the controlling current and the controlled current always mesh together
through the emitter wire, and their electrons always flow against the direction of the transistor’s
arrow. This is the first and foremost rule in the use of transistors: all currents must be going
in the proper directions for the device to work as a current regulator. The small, controlling
current is usually referred to simply as the base current because it is the only current that goes
through the base wire of the transistor. Conversely, the large, controlled current is referred to
as the collector current because it is the only current that goes through the collector wire. The
emitter current is the sum of the base and collector currents, in compliance with Kirchhoff’s
Current Law.
If there is no current through the base of the transistor, it shuts off like an open switch and
prevents current through the collector. If there is a base current, then the transistor turns on
like a closed switch and allows a proportional amount of current through the collector. Collector
current is primarily limited by the base current, regardless of the amount of voltage available to
push it. The next section will explore in more detail the use of bipolar transistors as switching
elements.
Importance
The transistor is considered by many to be one of the greatest discoveries or inventions in modern
history, ranking with banking and the printing press. Key to the importance of the transistor in
modern society is its ability to be produced in huge numbers using simple techniques, resulting
in vanishingly small prices. Computer ”chips” consist of millions of transistors and sell for rands,
with per-transistor costs in the thousandths-of-cents.
The low cost has meant that the transistor has become an almost universal tool for non-
mechanical tasks. Whereas a common device, say a refrigerator, would have used a mechanical
device for control, today it is often less expensive to simply use a few million transistors and
the appropriate computer program to carry out the same task through ”brute force”. Today
326
transistors have replaced almost all electromechanical devices, most simple feedback systems,
and appear in huge numbers in everything from computers to cars.
Hand-in-hand with low cost has been the increasing move to ”digitizing” all information.
With transistorized computers offering the ability to quickly find (and sort) digital information,
more and more effort was put into making all information digital. Today almost all media in
modern society is delivered in digital form, converted and presented by computers. Common
”analog” forms of information such as television or newspapers spend the vast majority of their
time as digital information, being converted to analog only for a small portion of the time.
Interesting The transistor was invented at Bell Laboratories in December 1947 (first demonstrated on
Fact: December 23) by John Bardeen, Walter Houser Brattain, and William Bradford Shockley,
who were awarded the Nobel Prize in physics in 1956.
16.3.4 The transistor as a switch

Because a transistor’s collector current is proportionally limited by its base current, it can be
used as a sort of current-controlled switch. A relatively small flow of electrons sent through the
base of the transistor has the ability to exert control over a much larger flow of electrons through
the collector.
Suppose we had a lamp that we wanted to turn on and off by means of a switch. Such a
circuit would be extremely simple:
For the sake of illustration, let’s insert a transistor in place of the switch to show how it can
control the flow of electrons through the lamp. Remember that the controlled current through
a transistor must go between collector and emitter. Since it’s the current through the lamp
that we want to control, we must position the collector and emitter of our transistor where the
two contacts of the switch are now. We must also make sure that the lamp’s current will move
against the direction of the emitter arrow symbol to ensure that the transistor’s junction bias
will be correct:
327
In this example I happened to choose an NPN transistor. A PNP transistor could also have
been chosen for the job, and its application would look like this:
The choice between NPN and PNP is really arbitrary. All that matters is that the proper
current directions are maintained for the sake of correct junction biasing (electron flow going
against the transistor symbol’s arrow).
Going back to the NPN transistor in our example circuit, we are faced with the need to add
something more so that we can have base current. Without a connection to the base wire of the
transistor, base current will be zero, and the transistor cannot turn on, resulting in a lamp that is
always off. Remember that for an NPN transistor, base current must consist of electrons flowing
from emitter to base (against the emitter arrow symbol, just like the lamp current). Perhaps the
simplest thing to do would be to connect a switch between the base and collector wires of the
transistor like this:
If the switch is open, the base wire of the transistor will be left ”floating” (not connected
to anything) and there will be no current through it. In this state, the transistor is said to be
cutoff. If the switch is closed, however, electrons will be able to flow from the emitter through
to the base of the transistor, through the switch and up to the left side of the lamp, back to the
positive side of the battery. This base current will enable a much larger flow of electrons from
the emitter through to the collector, thus lighting up the lamp. In this state of maximum circuit
current, the transistor is said to be saturated.
328
Of course, it may seem pointless to use a transistor in this capacity to control the lamp. After
all, we’re still using a switch in the circuit, aren’t we? If we’re still using a switch to control the
lamp – if only indirectly – then what’s the point of having a transistor to control the current?
Why not just go back to our original circuit and use the switch directly to control the lamp
current?
There are a couple of points to be made here, actually. First is the fact that when used in
this manner, the switch contacts need only handle what little base current is necessary to turn
the transistor on, while the transistor itself handles the majority of the lamp’s current. This
may be an important advantage if the switch has a low current rating: a small switch may be
used to control a relatively high-current load. Perhaps more importantly, though, is the fact
that the current-controlling behavior of the transistor enables us to use something completely
different to turn the lamp on or off. Consider this example, where a solar cell is used to control
the transistor, which in turn controls the lamp:
Or, we could use a thermocouple to provide the necessary base current to turn the transistor
on:
329
Even a microphone of sufficient voltage and current output could be used to turn the transistor
on, provided its output is rectified from AC to DC so that the emitter-base PN junction within
the transistor will always be forward-biased:
The point should be quite apparent by now: any sufficient source of DC current may be used
to turn the transistor on, and that source of current need only be a fraction of the amount of
current needed to energize the lamp. Here we see the transistor functioning not only as a switch,
but as a true amplifier: using a relatively low-power signal to control a relatively large amount
of power. Please note that the actual power for lighting up the lamp comes from the battery
to the right of the schematic. It is not as though the small signal current from the solar cell,
thermocouple, or microphone is being magically transformed into a greater amount of power.
Rather, those small power sources are simply controlling the battery’s power to light up the
lamp.
Field-Effect Transistor (FET)

(NOTE TO SELF: Schematic can be found under GFDL on wikipedia)
The schematic symbols for p- and n-channel MOSFETs. The symbols to the right include
an extra terminal for the transistor body (allowing for a seldom-used channel bias) whereas in
those to the left the body is implicitly connected to the source.
The most common variety of field-effect transistors, the enhancement-mode MOSFET (metal-
oxide semiconductor field-effect transistor) consists of a unipolar conduction channel and a metal
gate separated from the main conduction channel by a thin layer of (SiO2) glass. This is why an
alternative name for the FET is ’unipolar transistor.’ When a potential difference (of the proper
polarity) is impressed across gate and source, charge carriers are introduced to the channel,
making it conductive. The amount of this current can be modulated, or (nearly) completely
turned off, by varying the gate potential.
Because the gate is insulated, no DC current flows to or from the gate electrode. This
lack of a gate current and the ability of the MOSFET to act like a switch, allows particularly
efficient digital circuits to be created, with very low power consumption at low frequencies. The
power consumption increases markedly with frequency, because the capacitive loading of the
FET control terminal takes more energy to slew at higher frequencies, in direct proportion to the
frequency. Hence, MOSFETs have become the dominant technology used in computing hardware
such as microprocessors and memory devices such as RAM. Bipolar transistors are more rugged
and hence more useful for low-impedance loads and inductively reactive (e.g. motor) loads.
Power MOSFETs become less conductive with increasing temperature and can therefore be
applied in shunt, to increase current capacity, unlike the bipolar transistor, which has a negative
330
temperature coefficient of resistance, and is therefore prone to thermal runaway. The downside
of this is that, while the power FET can protect itself from overheating by diminishing the
current through it, high temperatures need to be avoided by using a larger heat sink than for an
equivalent bipolar device. Macroscopic FET power transistors are actually composed of many
little transistors. They are stacked (on-chip) to increase breakdown potential and paralleled to
reduce Ron, i.e. allowing for more current, bussing the gates to provide a single control (gate)
terminal.
The depletion mode FET is a little different. It uses a back-biased diode for the control
terminal, which presents a capacitive load to the driving circuit in normal operation. With the
gate tied to the source, a DFET is fully on. Changing the potential of a DFET (pulling an N-
channel gate downward, for example) will turn it off, i.e. ’deplete’ the channel (drain-source) of
charge carriers. MOSFETs, formerly called IGFETs (for Insulated Gate Field-Effect Transistor)
can be depletion-mode, enhancement-mode, or mixed-mode, but are almost always enhancement
mode in modern commercial practice. This means that, with the source and gate tied together
(thus equipotential) the channel will be off (high impedance or non-conducting). The n-channel
device (reverse for P-channel), like in the DFET, is turned on by raising the potential of the
gate. Typically, the gate on a MOSFET will withstand +-20V, relative to the source terminal. If
one were to raise the gate potential of an n-channel device without limiting the current to a few
milliamps, one would destroy the gate diode, like any other small diode. Why do we typically
think of n-channel devices as the default? In silicon devices, the ones that use majority carriers
that are electrons, rather than holes, are slightly faster and can carry more current than their
P-type counterparts. The same is true in GaAs devices.
The FET is simpler in concept than the bipolar transistor and can be constructed from a
wide range of materials.
The most common use of MOSFET transistors today is the CMOS (complementary metallic
oxide semiconductor) integrated circuit which is the basis for most digital electronic devices.
These use a totem-pole arrangement where one transistor (either the pull-up or the pull-down)
is on while the other is off. Hence, there is no DC drain, except during the transition from one
state to the other, which is very short. As mentioned, the gates are capacitive, and the charging
and discharging of the gates each time a transistor switches states is the primary cause of power
drain.
The C in CMOS stands for ’complementary.’ The pull-up is a P-channel device (using holes
for the mobile carrier of charge) and the pull-down is N-channel (electron carriers). This allows
busing of the control terminals, but limits the speed of the circuit to that of the slower P device
(in silicon devices). The bipolar solutions to push-pull include ’cascode’ using a current source
for the load. Circuits that utilize both unipolar and bipolar transistors are called Bi-Fet. A
recent development is called ’vertical P.’ Formerly, BiFet chip users had to settle for relatively
poor (horizontal) P-type FET devices. This is no longer the case and allows for quieter and
faster analog circuits.
A clever variant of the FET is the dual-gate device. This allows for two opportunities to turn
the device off, as opposed to the dual-base (bipolar) transistor which presents two opportunities
to turn the device on.
FETs can switch signals of either polarity, if their amplitude is significantly less than the
gate swing, as the devices (especially the parasitic diode-free DFET) are basically symmetrical.
This means that FETs are the most suitable type for analog multiplexing. With this concept,
one can construct a solid-state mixing board, for example.
The power MOSFET has a ’parasitic diode’ (back-biased) normally shunting the conduction
channel that has half the current capacity of the conduction channel. Sometimes this is useful in
driving dual-coil magnetic circuits (for spike protection), but in other cases it causes problems.
331
The high impedance of the FET gate makes it rather vulnerable to electrostatic damage,
though this is not usually a problem after the device has been installed.
A more recent device for power control is the insulated-gate bipolar transistor, or IGBT. This
has a control structure akin to a MOSFET coupled with a bipolar-like main conduction channel.
These have become quite popular.
16.4 principles of digital electronics logical gates, counting

circuits
16.4.1 Electronic logic gates
The simplest form of electronic logic is diode logic (DL). This allows AND and OR gates to be
built, but not inverters, and so is an incomplete form of logic. To built a complete logic system,
valves or transistors can be used. The simplest family of logic gates using bipolar transistors
is called resistor-transistor logic, or RTL. Unlike diode logic gates, RTL gates can be cascaded
indefinitely to produce more complex logic functions. These gates were used in early integrated
circuits. For higher speed, the resistors used in RTL were replaced by diodes, leading to diode-
transistor logic, or DTL. It was then discovered that one transistor could do the job of two
diodes in the space of one diode, so transistor-transistor logic, or TTL, was created. In some
types of chip, to reduce size and power consumption still further, the bipolar transistors were
replaced with complementary field-effect transistors (MOSFETs), resulting in complementary
metal-oxide-semiconductor (CMOS) logic.
For small-scale logic, designers now use prefabricated logic gates from families of devices such
as the TTL 7400 series invented by Texas Instruments and the CMOS 4000 series invented by
RCA, and their more recent descendants. These devices usually contain transistors with multiple
emitters, used to implement the AND function, which are not available as separate components.
Increasingly, these fixed-function logic gates are being replaced by programmable logic devices,
which allow designers to pack a huge number of mixed logic gates into a single integrated circuit.
Electronic logic gates differ significantly from their relay-and-switch equivalents. They are
much faster, consume much less power, and are much smaller (all by a factor of a million or more
in most cases). Also, there is a fundamental structural difference. The switch circuit creates a
continuous metallic path for current to flow (in either direction) between its input and its output.
The semiconductor logic gate, on the other hand, acts as a high-gain voltage amplifier, which
sinks a tiny current at its input and produces a low-impedance voltage at its output. It is not
possible for current to flow between the output and the input of a semiconductor logic gate.
Another important advantage of standardised semiconductor logic gates, such as the 7400 and
4000 families, is that they are cascadable. This means that the output of one gate can be wired
to the inputs of one or several other gates, and so on ad infinitum, enabling the construction
of circuits of arbitrary complexity without requiring the designer to understand the internal
workings of the gates.
In practice, the output of one gate can only drive a finite number of inputs to other gates,
a number called the ’fanout limit’, but this limit is rarely reached in the newer CMOS logic
circuits, as compared to TTL circuits. Also, there is always a delay, called the ’propagation
delay’, from a change an input of a gate to the corresponding change in its output. When gates
are cascaded, the total propagation delay is approximately the sum of the individual delays, an
effect which can become a problem in high-speed circuits.
The US symbol for an AND gate is: AND symbol and the IEC symbol is AND symbol.
The US circuit symbol for an OR gate is: OR symbol and the IEC symbol is: OR symbol.
332
The US circuit symbol for a NOT gate is: NOT symbol and the IEC symbol is: NOT symbol.
In electronics a NOT gate is more commonly called an inverter. The circle on the symbol is
called a bubble, and is generally used in circuit diagrams to indicate an inverted input or output.
The US circuit symbol for a NAND gate is: NAND symbol and the IEC symbol is: NAND
symbol.
The US circuit symbol for a NOR gate is: NOR symbol and the IEC symbol is: NOR symbol.
In practice, the cheapest gate to manufacture is usually the NAND gate. Additionally, Charles
Peirce showed that NAND gates alone (as well as NOR gates alone) can be used to reproduce
all the other logic gates.
Two more gates are the exclusive-OR or XOR function and its inverse, exclusive-NOR or
XNOR. Exclusive-OR is true only when exactly one of its inputs is true. In practice, these gates
are built from combinations of simpler logic gates.
The US circuit symbol for an XOR gate is: XOR symbol and the IEC symbol is: XOR
symbol.
16.5 Counting circuits

An arithmetic and logical unit (ALU) adder provides the basic functionality of arithmetic op-
erations within a computer, and is a significant component of the arithmetic and logical unit.
Adders are composed of half adders and full adders, which add two-bit binary pairs, and ripple
carry adders and carry look ahead adders which do addition operations to a series of binary
numbers.
(NOTE TO SELF: Pictures on wikipedia under GFDL)
16.5.1 Half Adder

A half adder is a logical circuit that performs an addition operation on two binary digits. The
half adder produces a sum and a carry value which are both binary digits.
Sum(s) = A xor B Cot(c) = A and B
Half adder circuit diagram Half adder circuit diagram
Following is the logic table for a half adder:
A B Sum Cot
0 0 0 0
0 1 1 0
1 0 1 0
1 1 0 1
16.5.2 Full adder

A full adder is a logical circuit that performs an addition operation on three binary digits. The
full adder produces a sum and carry value, which are both binary digits.
Sum = (A xor B) xor Cin Cot = (A nand B) nand (Cin nand (A xor B))
Full adder circuit diagram Full adder circuit diagram
333
A B Cin Sum Cot
0 0 0 0 0
0 0 1 1 0
0 1 0 1 0
0 1 1 0 1
1 0 0 1 0
1 0 1 0 1
1 1 0 0 1
1 1 1 1 1
Units
or
Table 16.1: Units used in Electronics
334
Chapter 17
The Atom
Atoms are the building blocks of matter. They are the basis of all the structures and organisms
in the universe. The planets, the sun, grass and trees, the air we breathe, and people are all
made up of atoms.
17.1 Models of the Atom

17.2 Structure of the Atom
Atoms are very small and cannot be seen with the naked eye. They consist of two main parts: the
positively charged nucleus at the centre and the negatively charged elementary particles called
electrons which surround the nucleus in their orbitals. (Elementary particle means that the
electron cannot be broken down to anything smaller and can be thought of as a point particle.)
The nucleus of an atom is made up of a collection of positively charged protons and neutral
particles called neutrons.
interesting fact: the neutrons and protons are not elementary particles. They are actually
made up of even smaller particles called quarks. Both protons and neutrons are made of three
quarks each. There are all sorts of other particles composed of quarks which nuclear physicists
study using huge detectors - you can find out more about this by reading the essay in Chapter
??.
(NOTE TO SELF: Insert diagram of atomic structure - see lab posters)
Atoms are electrically neutral which means that they have the same number of negative
electrons as positive protons. The number of protons in an atom is called the atomic number
which is sometimes also called Z. (NOTE TO SELF: check A and Z) The atomic number is what
distinguishes the different chemical elements in the Periodic table from each other. In fact, the
elements are listed on the Periodic table in order of their atomic numbers. For example, the first
element, hydrogen (H), has one proton whereas the sixth element, carbon (C) has 6 protons.
Atoms with the same number of protons (atomic number) share physical properties and show
similar chemical behaviour. The number of neutrons plus protons in the nucleus is called the
atomic mass of the atom.
335
17.3 Isotopes
Two atoms are considered to be the same element if they have the same number of protons
(atomic number). However, they do not have to have the same number of neutrons or overall
atomic mass. Atoms which have the same number of protons but different numbers of neutrons
are called isotopes. For example, the hydrogen atom has one proton and no neutrons. Therefore
its atomic number is Z=1 and atomic mass is A=1. If a neutron is added to the hydrogen nucleus,
then a new atom is formed with atomic mass A=2 but atomic number is still Z=1. This atom
is called deuterium and is an isotope of hydrogen.
17.4 Energy quantization and electron configuration

17.5 Periodicity of ionization energy to support atom ar-
rangement in Periodic Table
17.6 Successive ionisation energies to provide evidence for
arrangement of electrons into core and valence
[Brink and Jones sections: de Broglie - matter shows particle and wave characteristics, proved
by Davisson and Germer. Shroedinger and Heisenberg developed this model into quantum me-
chanics]
The nucleus (atomic nucleus) is the center of an atom. It is composed of one or more
protons and usually some neutrons as well. The number of protons in an atom’s nucleus is called
the atomic number, and determines which element the atom is (for example hydrogen, carbon,
oxygen, etc.).
Though the positively charged protons exert a repulsive electromagnetic force on each other,
the distances between nuclear particles are small enough that the strong interaction (which is
stronger than the electromagnetic force but decreases more rapidly with distance) predominates.
(The gravitational attraction is negligible, being a factor 1036 weaker than this electromagnetic
repulsion.)
The discovery of the electron was the first indication that the atom had internal structure.
This structure was initially imagined according to the ”raisin cookie” or ”plum pudding” model,
in which the small, negatively charged electrons were embedded in a large sphere containing all
the positive charge. Ernest Rutherford and Marsden, however, discovered in 1911 that alpha
particles from a radium source were sometimes scattered backwards from a gold foil, which led
to the acceptance of a planetary model, in which the electrons orbited a tiny nucleus in the same
way that the planets orbit the sun.
Interesting Fact: The word atom is derived from the Greek atomos, indivisible, from a-, not,
and tomos, a cut.
An atom is the smallest portion into which a chemical element can be divided while still
retaining its properties. Atoms are the basic constituents of molecules and ordinary matter.
Atoms are composed of subatomic particles.
Atoms are composed mostly of empty space, but also of smaller subatomic particles. At the
center of the atom is a tiny positive nucleus composed of nucleons (protons and neutrons). The
rest of the atom contains only the fairly flexible electron shells. Usually atoms are electrically
neutral with as many electrons as protons.
336
Atoms are generally classified by their atomic number, which corresponds to the number of
protons in the atom. For example, carbon atoms are those atoms containing 6 protons. All
atoms with the same atomic number share a wide variety of physical properties and exhibit the
same chemical behavior. The various kinds of atoms are listed in the Periodic table. Atoms
having the same atomic number, but different atomic masses (due to their different numbers of
neutrons), are called isotopes.
The simplest atom is the hydrogen atom, having atomic number 1 and consisting of one
proton and one electron. It has been the subject of much interest in science, particularly in the
early development of quantum theory.
The chemical behavior of atoms is largely due to interactions between the electrons. In
particular the electrons in the outermost shell, called the valence electrons, have the greatest
influence on chemical behavior. Core electrons (those not in the outer shell) play a role, but it
is usually in terms of a secondary effect due to screening of the positive charge in the atomic
nucleus.
There is a strong tendency for atoms to completely fill (or empty) the outer electron shell,
which in hydrogen and helium has space for two electrons, and in all other atoms has space
for eight. This is achieved either by sharing electrons with neighboring atoms or by completely
removing electrons from other atoms. When electrons are shared a covalent bond is formed
between the two atoms. Covalent bonds are the strongest type of atomic bond.
When one or more electrons are completely removed from one atom by another, ions are
formed. Ions are atoms that possess a net charge due to an imbalance in the number of protons
and electrons. The ion that stole the electron(s) is called an anion and is negatively charged. The
atom that lost the electron(s) is called a cation and is positively charged. Cations and anions
are attracted to each other due to coulombic forces between the positive and negative charges.
This attraction is called ionic bonding and is weaker than covalent bonding.
As mentioned above covalent bonding implies a state in which electrons are shared equally
between atoms, while ionic bonding implies that the electrons are completely confined to the
anion. Except for a limited number of extreme cases, neither of these pictures is completely
accurate. In most cases of covalent bonding, the electron is unequally shared, spending more
time around the more electronegative atom, resulting in the covalent bond having some ionic
character. Similarly, in ionic bonding the electrons often spend a small fraction of time around
the more electropositive atom, resulting in some covalent character for the ionic bond. [edit]
Models of the atom
* Democritus’ shaped-atom model (for want of a better name) * The plum pudding model *
Cubical atom * The Bohr model * The quantum mechanical model
The Plum pudding model of the atom was made after the discovery of the electron but before
the discovery of the proton or neutron. In it, the atom is envisioned as electrons surrounded by
a soup of positive charge, like plums surrounded by pudding. This model was disproved by an
experiment by Ernest Rutherford when he discovered the nucleus of the atom.
The Bohr Model is a physical model that depicts the atom as a small positively charged
nucleus with electrons in orbit at different levels, similar in structure to the solar system. Because
of its simplicity, the Bohr model is still commonly used and taught today.
In the early part of the 20th century, experiments by Ernest Rutherford and others had
established that atoms consisted of a small dense positively charged nucleus surrounded by
orbiting negatively charged electrons. However classical physics at that time was unable to
explain why the orbiting electrons did not spiral into the nucleus.
The simplest possible atom is hydrogen, which consists of a nucleus and one orbiting electron.
Since the nucleus is positive and the electron are oppositely charged they will attract one another
by coulomb force, in much the same way that the sun attracts the earth by gravitational force.
337
However, if the electron orbits the nucleus in a classical orbit, it ought to emit electromagnetic
radiation (light) according to well established theories of electromagnetism.
If the orbiting electron emits light, it must lose energy and spiral into the nucleus, so why do
atoms even exist? What’s more, the spectra of atoms show that the orbiting electrons can emit
light but only at certain frequencies. This made no sense at all to the scientists of the time.
These difficulties were resolved in 1913 by Niels Bohr who proposed that:
* (1) The orbiting electrons existed in orbits that had discrete quantized energies. That
is, not every orbit is possible but only certain specific ones. The exact energies of the allowed
orbits depends on the atom in question. * (2) The laws of classical mechanics do not apply
when electrons make the jump from one allowed orbit to another. * (3) When an electron makes
a jump from one orbit to another the energy difference is carried off (or supplied) by a single
quantum of light (called a photon) which has a frequency that directly depends on the energy
difference between the two orbitals.
f=E/h
where f is the frequency of the photon, E the energy difference, and h is a constant of
proportionality known as Planck’s constant. Defining we can write
where ? is the angular frequency of the photon.
* (4) The allowed orbits depend on quantized (discrete) values of orbital angular momentum,
L according to the equation
Where n = 1,2,3, and is called the angular momentum quantum number.
These assumptions explained many of the observations seen at the time, such as why spectra
consist of discrete lines. Assumption 4) states that the lowest value of n is 1. This corresponds
to a smallest possible radius (for the mathematics see Ohanian-principles of physics or any of the
large, usually American, college introductory physics textbooks) of 0.0529 nm. This is known as
the Bohr radius, and explains why atoms are stable. Once an electron is in the lowest orbit, it
can go no further. It cannot emit any more light because it would need to go into a lower orbit,
but it can’t do that if it is already in the lowest allowed orbit.
The Bohr model is sometimes known as the semiclassical model because although it does
include some ideas of quantum mechanics it is not a full quantum mechanical description of the
atom. Assumption 2) states that the laws of classical mechanics don’t apply during a quantum
jump but doesn’t state what laws should replace classical mechanics. Assumption 4) states that
angular momentum is quantised but does not explain why.
In order to fully describe an atom we need to use the full theory of quantum mechanics,
which was worked out by a number of people in the years following the Bohr model. This theory
treats the electrons as waves, which create 3D standing wave patterns in the atom. (This is
why quantum mechanics is sometimes called wave mechanics.) This theory considers that idea
of electrons as being little billiard ball like particles that travel round in orbits as absurdly
wrong; instead electrons form probability clouds. You might find the electron here with a certain
probability; you might find it over there with a different probability. However it is interesting
to note that if you work out the average radius of an electron in the lowest possible energy
state it turns out to be exactly equal to the Bohr radius (although it takes many more pages of
mathematics to work it out).
The full quantum mechanics theory is a beautiful theory that has been experimentally tested
and found to be incredibly accurate, however it is mathematically much more advanced, and
often using the much simpler Bohr model will get you the results with much less hassle. The
thing to remember is that it is only a model, an aid to understanding. Atoms are not really little
solar systems.
* See also: Hydrogen atom, quantum mechanics, Schrdinger equation, Niels Bohr. * An in-
teractive demonstration (http://webphysics.davidson.edu/faculty/dmb/hydrogen/) of the prob-
338
ability clouds of electron in Hydrogen atorm according to the full QM solution.
17.7 Bohr orbits

Brink and Jones sections: Standing waves (quantisation). Atom seen as positive nucleus with
vibrating electron waves surrounding it. Shrodinger’s equation calucaltes the energy of these
waves and their shape and position– most probable region of movement of electrons called orbitals
(talk about n=1,2 energy levels and spdf orbitals).
17.8 Heisenberg uncertainty Principle

Quantum mechanics is a physical theory that describes the behavior of physical systems at short
distances. Quantum mechanics provides a mathematical framework derived from a small set of
basic principles capable of producing experimental predictions for three types of phenomena that
classical mechanics and classical electrodynamics cannot account for: quantization, wave-particle
duality, and quantum entanglement. The related terms quantum physics and quantum theory
are sometimes used as synonyms of quantum mechanics, but also to denote a superset of theories,
including pre-quantum mechanics old quantum theory, or, when the term quantum mechanics is
used in a more restricted sense, to include theories like quantum field theory.
Quantum mechanics is the underlying theory of many fields of physics and chemistry, includ-
ing condensed matter physics, quantum chemistry, and particle physics.
17.9 Pauli exclusion principle

The Pauli exclusion principle is a quantum mechanical principle which states that no two identical
fermions may occupy the same quantum state. Formulated by Wolfgang Pauli in 1925, it is also
referred to as the ”exclusion principle” or ”Pauli principle.”
The Pauli principle only applies to fermions, particles which form antisymmetric quantum
states and have half-integer spin. Fermions include protons, neutrons, and electrons, the three
types of elementary particles which constitute ordinary matter. The Pauli exclusion principle
governs many of the distinctive characteristics of matter. Particles like the photon and graviton
do not obey the Pauli exclusion principle, because they are bosons (i.e. they form symmetric
quantum states and have integer spin) rather than fermions.
The Pauli exclusion principle plays a role in a huge number of physical phenomena. One
of the most important, and the one for which it was originally formulated, is the electron shell
structure of atoms. An electrically neutral atom contains bound electrons equal in number to
the protons in the nucleus. Since electrons are fermions, the Pauli exclusion principle forbids
them from occupying the same quantum state.
For example, consider a neutral helium atom, which has two bound electrons. Both of these
electrons can occupy the lowest-energy (1s) states by acquiring opposite spin. This does not
violate the Pauli principle because spin is part of the quantum state of the electron, so the two
electrons are occupying different quantum states. However, the spin can take only two different
values (or eigenvalues.) In a lithium atom, which contains three bound electrons, the third
electron cannot fit into a 1s state, and has to occupy one of the higher-energy 2s states instead.
Similarly, successive elements produce successively higher-energy shells. The chemical properties
of an element largely depends on the number of electrons in the outermost shell, which gives rise
to the periodic table of the elements.
339
The Pauli principle is also responsible for the large-scale stability of matter. Molecules cannot
be pushed arbitrarily close together, because the bound electrons in each molecule are forbidden
from entering the same state as the electrons in the other molecules - this is the reason for the
repulsive r-12 term in the Lennard-Jones potential. The Pauli principle is the reason you do not
fall through the floor.
Astronomy provides the most spectacular demonstrations of this effect, in the form of white
dwarf stars and neutron stars. In both types of objects, the usual atomic structures are disrupted
by large gravitational forces, leaving the constituents supported only by a ”degeneracy pressure”
produced by the Pauli exclusion principle. This exotic form of matter is known as degenerate
matter. In white dwarfs, the atoms are held apart by the degeneracy pressure of the electrons.
In neutron stars, which exhibit even larger gravitational forces, the electrons have merged with
the protons to form neutrons, which produce a larger degeneracy pressure.
Another physical phenomenon for which the Pauli principle is responsible is ferromagnetism,
in which the exclusion effect implies an exchange energy that induces neigboring electron spins
to align (whereas classically they would anti-align).
17.10 Ionization Energy

(first, second etc.)
17.11 Electron configuration

i.e. filling the orbitals starting from 1s..... Aufbau principle unpaired and paired electrons Hund’s
rule: 1 e- in each orbital before pairing in p orbitals shorthand: 1s2 2s2 2p1 etc
17.12 Valency
Capacity for bonding
Covalent bonding is a form of chemical bonding characterized by the sharing of one or more
pairs of electrons, by two atoms, in order to produce a mutual attraction; atoms tend to share
electrons, so as to fill their outer electron shells. Such bonds are always stronger than the
intermolecular hydrogen bond and similar in strength or stronger than the ionic bond. Commonly
covalent bond implies the sharing of just a single pair of electrons. The sharing of two pairs is
called a double bond and three pairs is called a triple bond. Aromatic rings of atoms and other
resonant structures are held together by covalent bonds that are intermediate between single and
double. The triple bond is relatively rare in nature, and two atoms are not observed to bond
more than triply.
Covalent bonding most frequently occurs between atoms with similar electronegativities,
where neither atom can provide sufficient energy to completely remove an electron from the
other atom. Covalent bonds are more common between non-metals, whereas ionic bonding is
more common between two metal atoms or a metal and a non-metal atom.
Covalent bonding tends to be stronger than other types of bonding, such as ionic bonding.
In addition unlike ionic bonding, where ions are held together by a non-directional coulombic
attraction, covalent bonds are highly directional. As a result, covalently bonded molecules tend
to form in a relatively small number of characteristic shapes, exhibiting specific bonding angles.
340
17.13
341
Chapter 18
Modern Physics
18.1 Introduction to the idea of a quantum

Imagine that a beam of light is actually made up of little ”packets” or ”bundles” of energy, called
quanta.
It’s like looking at a crowd of people from above. At first, it seems as though they are one
huge patch, without any spaces between them. You would never suspect that they were people.
But as you move closer, you slowly begin to see that they are individuals, and when you get even
closer, you may even recognize a few. Light seems like a continuous wave at first, but when we
zoom in at the subatomic level, we notice that a beam of light actually consists of little ”packets”
of energy, or quanta.
This idea introduces the concept of the quantum (particle) nature of light, which is demon-
strated by the photoelectric effect. When a metal surface is illuminated with light, electrons can
be emitted from the surface. This is known as the photoelectric effect.
18.2 The wave-particle duality

The wave nature of light is demonstrated by diffraction, interference, and polarization of light;
and the particle nature of light is demonstrated by the photoelectric effect. So light has both
wave-like and particle-like properties, but only shows one or the other, depending on the kind
of experiment we perform. A wave-type experiment shows the wave nature, and a particle-type
experiment shows particle nature.
When you’re watching a cricketer on the field, you see only that side of his personality. So
to you, he is just a good cricketer. You do not see his golfing side, for example. Only when he
is playing golf, will that side be revealed to you. The same applies to light.
Now, we consider light to behave not as a wave, but as particles. But what do we call a
’particle’ of light?
Photon : A photon is a quantum (energy packet) of light.
Imagine a sheet of metal. On the surface, there are electrons that are waiting to be set free.
If a photon comes along and strikes the surface of the metal, then it will give its entire energy
packet to one electron. This means that the electron now has some energy, and it may escape
(leave the surface) if this energy Ek is greater than the minimum energy required to free an
electron Emin.
Now, suppose the electron needs 5eV of kinetic energy to escape. And suppose this little
342
photon has just 2eV of energy in its energy packet. Then the electron will not leave the surface
of the metal. But suppose the photon has 8eV of energy. This means that the electron will
emerge with 3eV of kinetic energy.
Note that this does not mean the photon can give 5eV of energy to one electron and 3eV to
another. A photon will give all of its energy to just one electron.
The minimum amount of energy needed for an electron to escape (electrons do not normally
leave a metal whenever they please), is called the work function of the metal. In our example,
the work function is 5eV. The work function has a different value for each metal: 4.70eV for
copper and 2.28eV for sodium. It is worth mentioning that the best conductors are those with
the smallest work functions.
The frequency of the radiation is very important, because if it is below a certain threshold
value, no electrons will be emitted. Even if the intensity of the light is increased, and the light is
allowed to fall on the surface for a long period of time, if the frequency of the radiation is below
the threshold frequency, electrons will not be emitted.
We therefore reason that E = h? Where E is the energy of the photon, h = 6.57X10− 34Js
is Plancks constant, and ? is the frequency of the radiation.
This means that the kinetic energy acquired by the electron is equal to the energy of the
photon minus the work function, ?, i.e. Ek = h? - ? The electrons emerge with a range
of velocities from zero up to a maximum vmax. The maximum kinetic energy, (1/2)mvmax2,
depends (linearly) on the frequency of the radiation, and is independent of its intensity.
For incident radiation of a given frequency, the number of electrons emitted per unit time is
proportional to the intensity of the radiation.
Electron emission takes place from the instant the light shines on the surface, i.e. there is no
detectable time delay.
What are the uses of the photoelectric effect?
For this work, Einstein received the Nobel prize in 1905.
18.3 Practical Applications of Waves: Electromagnetic Waves

In physics, wave-particle duality holds that light and matter simultaneously exhibit properties
of waves and of particles. This concept is a consequence of quantum mechanics.
In 1905, Einstein reconciled Huygens’ view with that of Newton; he explained the photoelec-
tric effect (an effect in which light did not seem to act as a wave) by postulating the existence of
photons, quanta of energy with particulate qualities. Einstein postulated that light’s frequency,
?, is related to the energy, E, of its photons:
E = hf (18.1)
where h is Planck’s constant (6.626 × 10−34 Js).

In 1924, De Broglie claimed that all matter has a wave-like nature; he related wavelength, ?,
and momentum, p:
h
λ= (18.2)
p
This is a generalization of Einstein’s equation above since the momentum of a photon is given
by,
E
p= , (18.3)
c
where c is the speed of light in vacuum, and ? = c / ?.
343
De Broglie’s formula was confirmed three years later by guiding a beam of electrons (which
have rest mass) through a crystalline grid and observing the predicted interference patterns.
Similar experiments have since been conducted with neutrons and protons. Authors of similar
recent experiments with atoms and molecules claim that these larger particles also act like waves.
This is still a contoversial subject because these experimenters have assumed arguments of wave-
particle duality and have assumed the validity of deBroglie’s equation in their argument.
The Planck constant h is extremely small and that explains why we don’t perceive a wave-like
quality of everyday objects: their wavelengths are exceedingly small. The fact that matter can
have very short wavelengths is exploited in electron microscopy.
In quantum mechanics, the wave-particle duality is explained as follows: every system and
particle is described by state functions which encode the probability distributions of all measur-
able variables. The position of the particle is one such variable. Before an observation is made
the position of the particle is described in terms of probability waves which can interfere with
each other.
344
Chapter 19
Inside atomic nucleus
Amazingly enough, human mind that is kind of contained inside a couple of liters of human’s
brain, is able to deal with extremely large as well as extremely small objects such as the whole
universe and its smallest building blocks. So, what are these building blocks? As we already
know, the universe consists of galaxies, which consist of stars with planets moving around. The
planets are made of molecules, which are bound groups (chemical compounds) of atoms.
There are more than 1020 stars in the universe. Currently, scientists know over 12 million
chemical compounds i.e. 12 million different molecules. All this variety of molecules is made
of only a hundred of different atoms. For those who believe in beauty and harmony of nature,
this number is still too large. They would expect to have just few different things from which
all other substances are made. In this chapter, we are going to find out what these elementary
things are.
19.1 What the atom is made of

The Greek word ατ oµoν (atom) means indivisible. The discovery of the fact that an atom is
actually a complex system and can be broken in pieces was the most important step and pivoting
point in the development of modern physics.
It was discovered (by Rutherford in 1911) that an atom consists of a positively charged nu-
cleus and negative electrons moving around it. At first, people tried to visualize an atom as a
microscopic analog of our solar system where planets move around the sun. This naive planetary
model assumes that in the world of very small objects the Newton laws of classical mechanics
are valid. This, however, is not the case.
The microscopic world is governed by quantum mechanics which does not have such notion
as trajectory. Instead, it describes the dynamics of particles in terms of quantum states that are
characterized by probability distributions of various observable quantities.
For example, an electron in the atom is not moving along a certain trajectory but rather along
all imaginable trajectories with different probabilities. If we were trying to catch this electron,
after many such attempts we would discover that the electron can be found anywere around the
nucleus, even very close to and very far from it. However, the probabilities of finding the electron
345
P (r)
r
RBohr
Figure 19.1: Probability density P (r) for finding the electron at a distance r from the proton in the
ground state of hydrogen atom.
at different distances from the nucleus would be different. What is amazing: the most probable
distance corresponds to the classical trajectory!
You can visualize the electron inside an atom as moving around the nucleus chaotically and
extremely fast so that for our “mental eyes” it forms a cloud. In some places this cloud is more
dense while in other places more thin. The density of the cloud corresponds to the probability
of finding the electron in a particular place. Space distribution of this density (probability) is
what we can calculate using quantum mechanics. Results of such calculation for hydrogen atom
are shown in Fig. 19.1. As was mentioned above, the most probable distance (maximum of the
curve) coincides with the Bohr radius.
Quantum mechanical equation for any bound system (like an atom) can have solutions only
at a discrete set of energies E1 , E2 , E3 . . . , etc. There are simply no solutions for the energies
E in between these values, such as, for instance, E1 < E < E2 . This is why a bound system of
microscopic particles cannot have an arbitrary energy and can only be in one of the quantum
states. Each of such states has certain energy and certain space configuration, i.e. distribution
of the probability.
A bound quantum system can make transitions from one quantum state to another either
spontaneously or as a result of interaction with other systems. The energy conservation law is
one of the most fundamental and is valid in quantum world as well as in classical world. This
means that any transition between the states with energies Ei and Ej is accompanied with either
emission or absorption of the energy ∆E = |Ei − Ej |. This is how an atom emits light.
Electron is a very light particle. Its mass is negligible as compared to the total mass of the
atom. For example, in the lightest of all atoms, hydrogen, the electron constitutes only 0.054%
of the atomic mass. In the silicon atoms that are the main component of the rocks around us, all
14 electrons make up only 0.027% of the mass. Thus, when holding a heavy rock in your hand,
you actually feel the collective weight of all the nuclei that are inside it.
346
19.2 Nucleus
Is the nucleus a solid body? Is it an elementary building block of nature? No and no! Although
it is very small, a nucleus consists of something even smaller.
19.2.1 Proton
The only way to do experiments with such small objects as atoms and nuclei, is to collide them
with each other and watch what happens. Perhaps you think that this is a barbaric way, like
colliding a “Mercedes” and “Toyota” in order to learn what is under their bonnets. But with
microscopic particles nothing else can be done.
In the early 1920’s Rutherford and other physicists made many experiments, changing one
element into another by striking them with energetic helium nuclei. They noticed that all the
time hydrogen nuclei were emitted in the process. It was apparent that the hydrogen nucleus
played a fundamental role in nuclear structure and was a constituent part of all other nuclei.
By the late 1920’s physicists were regularly referring to hydrogen nucleus as proton. The term
“proton” seems to have been coined by Rutherford, and first appears in print in 1920.
19.2.2 Neutron
Thus it was established that atomic nuclei consist of protons. Number of protons in a nucleus
is such that makes up its positive charge. This number, therefore, coincides with the atomic
number of the element in the Mendeleev’s Periodic table.
This sounded nice and logical, but serious questions remained. Indeed, how can positively
charged protons stay together in a nucleus? Repelling each other by electric force, they should
fly away in different directions. Who keeps them together?
Furthermore, the proton mass is not enough to account for the nuclear masses. For example,
if the protons were the only particles in the nucleus, then a helium nucleus (atomic number 2)
would have two protons and therefore only twice the mass of hydrogen. However, it actually is
four times heavier than hydrogen. This suggests that it must be something else inside nuclei in
addition to protons.
These additional particles that kind of “glue” the protons and make up the nuclear mass,
apparently, are electrically neutral. They were therefore called neutrons. Rutherford predicted
the existence of the neutron in 1920. Twelve years later, in 1932, his assistant James Chadwick
found it and measured its mass, which turned out to be almost the same but slightly larger than
that of the proton.
19.2.3 Isotopes
Thus, in the early 1930’s it was finally proved that atomic nucleus consists of two types of par-
ticles, the protons and neutrons. The protons are positively charged while the neutrons are
electrically neutral. The proton charge is exactly equal but opposite to that of the electron.
The masses of proton and neutron are almost the same, approximately 1836 and 1839 electron
masses, respectively.
347
Apart from the electric charge, the proton and neutron have almost the same properties. This
is why there is a common name for them: nucleon. Both the proton and neutron are nucleons,
like a man and a woman are both humans. In physics literature, the proton is denoted by letter
p and the neutron by n. Sometimes, when the difference between them is unimportant, it is used
the letter N meaning nucleon (in the same sense as using the word “person” instead of man or
woman).
Chemical properties of an element are determined by the charge of its atomic nucleus, i.e.
by the number of protons. This number is called the atomic number and is denoted by letter
Z. The mass of an atom depends on how many nucleons its nucleus contains. The number of
nucleons, i.e. total number of protons and neutrons, is called the atomic mass number and is
denoted by letter A.
Standard nuclear notation shows the chemical symbol, the mass number and the atomic
number of the isotope.
number of nucleons
A
ZX
chemical symbol
number of protons
For example, the iron nucleus (26-th place in the Mendeleev’s periodic table of the elements)
with 26 protons and 30 neutrons is denoted as
56
26 Fe ,
where the total nuclear charge is Z = 26 and the mass number A = 56. The number of neutrons
is simply the difference N = A − Z (here, it is used the same letter N , as for nucleon, but this
should not cause any confusion). Chemical symbol is inseparably linked with Z. This is why the
lower index is sometimes omitted and you may encounter the simplified notation like 56 Fe.
If we add or remove a few neutrons from a nucleus, the chemical properties of the atom
remain the same because its charge is the same. This means that such atom should remain in
the same place of the Periodic table. In Greek, “same place” reads ίσoς τ óπoς (isos topos). The
nuclei, having the same number of protons, but different number of neutrons, are called therefore
isotopes.
Different isotopes of a given element have the same atomic number Z, but different mass
numbers A since they have different numbers of neutrons N . Chemical properties of different
isotopes of an element are identical, but they will often have great differences in nuclear stability.
For stable isotopes of the light elements, the number of neutrons will be almost equal to the
number of protons, but for heavier elements, the number of neutrons is always greater than Z
and the neutron excess tends to grow when Z increases. This is because neutrons are kind of
glue that keeps repelling protons together. The greater the repelling charge, the more glue you
need.
348
19.3 Nuclear force
Since atomic nuclei are very stable, the protons and neutrons must be kept inside them by some
force and this force must be rather strong. What is this force? All of modern particle physics
was discovered in the effort to understand this force!
Trying to answer this question, at the beginning of the XX-th century, physicists found that
all they knew before, was inadequate. Actually, by that time they knew only gravitational and
electromagnetic forces. It was clear that the forces holding nucleons were not electromagnetic.
Indeed, the protons, being positively charged, repel each other and all nuclei would decay in a
split of a second if some other forces would not hold them together. On the other hand, it was
also clear that they were not gravitational, which would be too weak for the task.
The simple conclusion was that nucleons are able to attract each other by yet unknown nu-
clear forces, which are stronger than the electromagnetic ones. Further studies proved that this
hypothesis was correct.
Nuclear force has rather unusual properties. Firstly, it is charge independent. This means
that in all pairs nn, pp, and np nuclear forces are the same. Secondly, at distances ∼ 10 −13 cm,
the nuclear force is attractive and very strong, ∼ 100 times stronger than the electromagnetic
repulsion. Thirdly, the nuclear force is of a very short range. If the nucleons move away from
each other for more than few fermi (1 fm=10−13 cm) the nuclear attraction practically disappears.
Therefore the nuclear force looks like a “strong man with very short hands”.
19.4 Binding energy and nuclear masses

19.4.1 Binding energy
When a system of particles is bound, you have to spend certain energy to disintegrate it, i.e. to
separate the particles. The easiest way to do it is to strike the system with a moving particle that
carries kinetic energy, like we can destroy a glass bottle with a bullet or a stone. If our bullet-
particle moves too slow (i.e. does not have enough kinetic energy) it cannot disintegrate the
system. On the other hand, if its kinetic energy is too high, the system is not only disintegrated
but the separated particles acquire some kinetic energy, i.e. move away with some speed. There
is an intermediate value of the energy which is just enough to destroy the system without giving
its fragments any speed. This minimal energy needed to break up a bound system is called
binding energy of this system. It is usually denoted by letter B.
19.4.2 Nuclear energy units

The standart unit of energy, Joule, is too large to measure the energies associated with individual
nuclei. This is why in nuclear physics it is more convenient to use a much smaller unit called
Mega-electron-Volt (MeV). This is the amount of energy that an electron acquires after passing
between two charged plates with the potential difference (voltage) of one million Volts. Sounds
very huge, isn’t it? But look at this relation
1 MeV = 1.602 × 10−13 J
and think again. In the units of MeV, most of the energies in nuclear world can be expressed by
values with only few digits before decimal point and without ten to the power of something. For
349
example, the binding energy of proton and neutron (which is the simplest nuclear system and is
called deuteron) is
Bpn = 2.225 MeV .
The simplicity of the numbers is not the only advantage of using the unit MeV. Another, more
important advantage, comes from the fact that most of experiments in nuclear physics are collision
experiments, where particles are accelerated by electric field and collide with other particles.
From the above value of Bpn , for instance, we immediately know that in order to break up
deuterons, we need to bombard them with a flux of electrons accelerated through a voltage not
less than 2.225 million Volts. No calculation is needed! On the other hand, if we know that
a charged particle (with a unit charge) passes through a voltage, say, 5 million Volts, we can,
without any calculation, say that it acqures the energy of 5 MeV. It is very convenient. Isn’t it?
19.4.3 Mass defect

Comparing the masses of atomic nuclei with the masses of the nucleons that constitute them,
we encounter a surprising fact: Total mass of the nucleons is greater than mass of the nucleus!
For example, for the deuteron we have
md < m p + m n ,
where md , mp , and mn are the masses of deuteron, proton, and neutron, respectively. The
difference is rather small,
(mp + mn ) − md = 3.968 × 10−30 kg ,
but on the nuclear scale is noticeable since the mass of proton, for example,
mp = 1672.623 × 10−30 kg
is also very small. This phenomenon is called “mass defect”. Where the mass disappears to,
when nucleons are bound?
To answer this question, we notice that the energy of a bound state is lower than the energy
of free particles. Indeed, to liberate them from a bound complex, we have to give them some
energy. Thinking in the opposite direction, we conclude that, when forming a bound state, the
particles have to get rid of the energy excess, which is exactly equal to the binding energy. This
is observed experimentally: When a proton captures a neutron to form a deuteron, the excess
energy of 2.225 MeV is emitted via electromagnetic radiation.
A logical conclusion from the above comes by itself: When proton and neutron are bounding,
some part of their mass disappears together with the energy that is carried away by the radiation.
And in the opposite process, when we break up the deutron, we give it the energy, some part of
which makes up the lost mass.
Albert Einstein came to the idea of the equivalence between the mass and energy long before
any experimental evidences were found. In his theory of relativity, he showed that total energy
E of a moving body with mass m is
mc2
E=r , (19.1)
v2
1−
c2
350
where v is its velocity and c the speed of light. Applying this equation to a non-moving body
(v = 0), we conclude that it possesses the rest energy
E0 = mc2 (19.2)
simply because it has mass. As you will see, this very formula is the basis for making nuclear
bombs and nuclear power stations!
All the development of physics and chemistry, preceding the theory of relativity, was based
on the assumption that the mass and energy of a closed system are conserving in all possible
processes and they are conserved separately. In reality, it turned out that the conserving quantity
is the mass-energy,
Ekin + Epot + Erad + mc2 = const ,
i.e. the sum of kinetic energy, potential energy, the energy of radiation, and the mass of the
system.
In chemical reactions the fraction of the mass that is transformed into other forms of energy
(and vise versa), is so small that it is not detectable even in most precise measurements. In
nuclear processes, however, the energy release is very often millions times higher and therefore
is observable.
You should not think that mutual transformations of mass and energy are the features of only
nuclear and atomic processes. If you break up a piece of rubber or chewing gum, for example,
in two parts, then the sum of masses of these parts will be slightly larger than the mass of the
whole piece. Of course we will not be able to detect this “mass defect” with our scales. But we
can calculate it, using the Einstein formula (19.2). For this, we would need to measure somehow
the mechanical work A used to break up the whole piece (i.e. the amount of energy supplied to
it). This can be done by measuring the force and displacement in the breaking process. Then,
according to Eq. (19.2), the mass defect is
A
∆m = .
c2
To estimate possible effect, let us assume that we need to stretch a piece of rubber in 10 cm
before it breaks, and the average force needed for this is 10 N (approximately 1 kg). Then
A = 10 N × 0.1 m = 1 J ,
and hence
1J
∆m = ≈ 1.1 × 10−17 kg.
(299792458 m/s)2
This is very small value for measuring with a scale, but huge as compared to typical masses of
atoms and nuclei.
19.4.4 Nuclear masses

Apparently, an individual nucleus cannot be put on a scale to measure its mass. Then how can
nuclear masses be measured?
This is done with the help of the devices called mass spectrometers. In them, a flux of identi-
cal nuclei, accelerated to a certain energy, is directed to a screen where it makes a visible mark.
351
Before striking the screen, this flux passes through magnetic field, which is perpendicular to
velocity of the nuclei. As a result, the flux is deflected to certain angle. The greater the mass,
the smaller is the angle (because of inertia). Thus, measuring the displacement of the mark from
the center of the screen, we can find the deflection angle and then calculate the mass.
Since mass and energy are equivalent, in nuclear physics it is customary to measure masses
of all particles in the units of energy, namely, in MeV. Examples of masses of subatomic particles
are given in Table 19.1. The values given in this table, are the energies to which the nuclear
particle number of protons number of neutrons mass (MeV)
e 0 0 0.511
p 1 0 938.272
n 0 1 939.566
2
1H 1 1 1875.613
3
1H 1 2 2808.920
3
2 He 2 1 2808.391
4
2 He 2 2 3727.378
7
3 Li 3 4 6533.832
9
4 Be 4 5 8392.748
12
6C 6 6 11174.860
16
8O 8 6 14895.077
238
92 U 92 146 221695.831
Table 19.1: Masses of electron, nucleons, and some nuclei.
masses are equivalent via the Einstein formula (19.2).
There are several advantages of using the units of MeV to measure particle masses. First
of all, like with nuclear energies, we avoid handling very small numbers that involve ten to the
power of something. For example, if we were measuring masses in kg, the electron mass would
be me = 9.1093897 × 10−31 kg. When masses are given in the equivalent energy units, it is very
easy to calculate the mass defect. Indeed, adding the masses of proton and neutron, given in
the second and third rows of Table 19.1, and subtracting the mass of 21 H, we obtain the binding
energy 2.225 MeV of the deuteron without further ado. One more advantage comes from particle
physics. In collisions of very fast moving particles new particles (like electrons) can be created
from vacuum, i.e. kinetic energy is directly transformed into mass. If the mass is expressed in
the energy units, we know how much energy is needed to create this or that particle, without
calculations.
352
19.5 Radioactivity
As was said before, the nucleus experiences the intense struggle between the electric repulsion
of protons and nuclear attraction of the nucleons to each other. It therefore should not be sur-
prising that there are many nuclei that are unstable. They can spontaneously (i.e. without an
external push) break in pieces. When the fragments reach the distances where the short range
nuclear attraction disappears, they fiercely push each other away by the electric forces. Thus
accelerated, they move in different directions like small bullets making destruction on their way.
This is an example of nuclear radioactivity but there are several other varieties of radioactive
decay.
19.5.1 Discovery of radioactivity

Nuclear radioactivity was discovered by Antoine Henri Becquerel in 1896. Following Wilhelm
Roentgen who discovered the X-rays, Becquerel pursued his own investigations of these mysteri-
ous rays.
The material Becquerel chose to work with contained uranium. He found that the crystals
containing uranium and exposed to sunlight, made images on photographic plates even wrapped
in black paper. He mistakingly concluded that the sun’s energy was being absorbed by the ura-
nium which then emitted X-rays. The truth was revealed thanks to bad weather.
On the 26th and 27th of February 1896 the skies over Paris were overcast and the uranium
crystals Becquerel intended to expose to the sun were returned to a drawer and put over (by
chance) the photographic plates. On the first of March, Becquerel developed the plates and to his
surprise, found that the images on them were clear and strong. Therefore the uranium emitted
radiation without an external source of energy such as the sun. This was the first observation of
the nuclear radioactivity.
Later, Becquerel demonstrated that the uranium radiation was similar to the X-rays but,
unlike them, could be deflected by a magnetic field and therefore must consist of charged particles.
For his discovery of radioactivity, Becquerel was awarded the 1903 Nobel Prize for physics.
19.5.2 Nuclear α, β, and γ rays

Classical experiment that revealed complex content of the nuclear radiation, was done as follows.
The radium crystals (another radioactive element) were put at the bottom of a narrow straight
channel made in a thick piece of lead and open at one side. The lead absorbed everything except
the particles moving along the channel. This device therefore produced a flux of particles moving
in one direction like bullets from a machine gun. In front of the channel was a photoplate that
could register the particles.
Without the magnetic field, the image on the plate was in the form of one single dot. When
the device was immersed into a perpendicular magnetic field, the flux of particles was split in
three fluxes, which was reflected by three dots on the photographic plate.
One of the three fluxes was stright, while two others were deflected in opposite directions.
This showed that the initial flux contained positive, negative, and neutral particles. They were
353
named respectively the α, β, and γ particles.
The α-rays were found to be the 4 He nuclei, two protons and two neutrons bound together.
They have weak penetrating ability, a few centimeters of air or a few sheets of paper can effectively
block them. The β-rays proved to be electrons. They have a greater penetrating power than the
α-particles and can penetrate 3 mm of aluminum. The γ-rays are not deflected because they are
high energy photons. They have the same nature as the radio waves, visible light, and the X-rays,
but have much shorter wavelength and therefore are much more energetic. Among the three,
the γ-rays have the greatest penetrating power being able to pass through several centimeters of
lead and still be detected on the other side.
19.5.3 Danger of the ionizing radiation

The α, β, and γ particles moving through matter, collide with atoms and knock out electrons
from them, i.e. make positive ions out of the atoms. This is why these rays are called ionizing
radiation.
Apart from ionizing the atoms, this radiation destroys molecules. For humans and all other
organisms, this is the most dangerous feature of the radiation. Imagine thousands of tiny tiny
bullets passing through your body and making destruction on their way. Although people do
not feel any pain when exposed to nuclear radiation, it harms the cells of the body and thus can
make people sick or even kill them. Illness can strike people years after their exposure to nu-
clear radiation. For example, the ionizing particles can randomly modify the DNA (long organic
molecules that store all the information on how a particular cell should function in the body).
As a result, some cells with wrong DNA may become cancer cells.
Fortunately, our body is able to repair some damages caused by radiation. Indeed, we are
constantly bombarded by the radiation coming from the outer space as well as from the inner
parts of our own planet and still survive. However, if the number of damages becomes too large,
the body will not cope with them anymore.
There are established norms and acceptable limits for the radiation that are considered safe
for human body. If you are going to work in contact with radioactive materials or near them,
make sure that the exposure dose is monitored and the limits are adhered to.
You should understand that no costume can protect you from γ-rays! Only a thick wall of
concrete or metal can stop them. The special costumes and masks that people wear when han-
dling radioactive materials, protect them not from the rays but from contamination with that
materials. Imagine if few specks of radioactive dirt stain your everyday clothes or if you inhale
radioactive atoms. They will remain with you all the time and will shoot the “bullets” at you
even when you are sleeping.
In many cases, a very effective way of protecting yourself from the radiation is to keep certain
distance. Radiation from nuclear sources is distributed equally in all directions. Therefore the
number n of dangerous particles passing every second through a unit area (say 1 cm 2 ) is the
total number N of particles emitted during 1 second, divided by the surface of a sphere
N
n= ,
4πr2
354
where r is the distance at which we make the observation. From this simple formula, it is seen
that the radiation intensity falls down with incresing distance quadratically. In other words, if
you increase the distance by a factor of 2, your exposure to the radiation will be decreased by a
factor of 4.
19.5.4 Decay law

Unstable nuclei decay spontaneously. A given nucleus can decay next moment, next day or even
next century. Nobody can predict when it is going to happen. Despite this seemingly chaotic
and “unscientific” situation, there is a strict order in all this.
Atomic nuclei, being microscopic objects, are ruled by quantum probabilistic laws. Although
we cannot predict the exact moment of its decay, we can calculate the probability that a nucleus
will decay within this or that time interval. Nuclei decay because of their internal dynamics and
not because they become “old” or somehow “rotten”.
To illustrate this, let us imagine that yesterday morning we found that a certain nucleus was
going to decay within 24 hours with the probability of 50%. However, this morning we found
that it is still “alive”. This fact does not mean that the decay probability for another 24 hours
increased. Not at all! It remains the same, 50%, because the nucleus remains the same, nothing
wrong happened to it. This can go on and on for centuries.
Actually, we never deal with individual nuclei but rather with huge numbers of identical
nuclei. For such collections (ensembles) of quantum objects, the probabilistic laws become stat-
ictical laws. Let us assume that in the above example we had 1 million identical nuclei instead
of only one. Then by this morning only half of these nuclei would survive because the decay
probability for 24 hours was 50%. Among the remaining 500000 nuclei, 250000 will decay by
tomorrow morning, then after another 24 hours only 125000 will remain and so on.
The number of unstable nuclei that are still “alive” continuously decreases with time according
to the curve shown in Fig. 19.2. If initially, at time t = 0, their number is N0 , then after certain
time interval T1/2 only half of these nuclei will remain, namely, 12 N0 . Another one half of the
remaining half will decay during another such interval. So, after the time 2T 1/2 , we will have
only one quarter of the initial amount, and so on. The time interval T1/2 , during which one half
of unstable nuclei decay, is called their half-life time. It is specific for each unstable nucleus and
vary from a fraction of a second to thousands and millions of years. A few examples of such
lifetimes are given in Table 19.2
19.5.5 Radioactive dating

Examining the amounts of the decay products makes possible radioactive dating. The most
famous is the Carbon dating, a variety of radioactive dating which is applicable only to matter
which was once living and presumed to be in equilibrium with the atmosphere, taking in carbon
dioxide from the air for photosynthesis.
Cosmic ray protons blast nuclei in the upper atmosphere, producing neutrons which in turn
bombard nitrogen, the major constituent of the atmosphere. This neutron bombardment pro-
duces the radioactive isotope 146 C. The radioactive carbon-14 combines with oxygen to form
355
N (t)
N0
1
2 N0
1
4 N0
1
8 N0
0 T1/2 2T1/2 3T1/2 4T1/2
Figure 19.2: The time T1/2 during which one half of the initial amount of unstable particles decay,
is called their half-life time.
isotope T1/2 decay mode

214
84 Po 1.64 × 10−4 s α, γ
89
36 Kr 3.16 min β−, γ
222
86 Rn 3.83 days α, γ
90
38 Sr 28.5 years β−
226
88 Ra 1.6 × 103 years α, γ
14
6C 5.73 × 103 years β−
238
92 U 4.47 × 109 years α, γ
115
49 In 4.41 × 1014 years β−
Table 19.2: Half-life times of several unstable isotopes.
carbon dioxide and is incorporated into the cycle of living things.
14
The isotope 6C decays (see Table 19.2) inside living bodies but is replenished from the air
356
and food. Therefore, while an organism is alive, the concentration of this isotope in the body re-
mains constant. After death, the replenishment from the breath and food stops, but the isotopes
that are in the dead body continue to decay. As a result the concentration of 146 C in it gradually
decreases according to the curve shown in Fig. 19.2. The time t = 0 on this Figure corresponds
to the moment of death, and N0 is the equilibrium concentration of 146 C in living organisms.
Therefore, by measuring the radioactive emissions from once-living matter and comparing its
activity with the equilibrium level of emissions from things living today, an estimation of the
time elapsed can be made. For example, if the rate of the radioactive emissions from a piece of
wood, caused by the decay of 146 C, is one-half lower than from living trees, then we can conclude
that we are at the point t = T1/2 on the curve 19.2, i.e. it is elapsed exactly one half-life-time
period. According to the Table 19.2), this means that the tree, from which this piece of wood
was made, was cut approximately 5730 years ago. This is how physicists help archaeologists to
assign dates to various organic materials.
19.6 Nuclear reactions

Those of you who studied chemistry, are familiar with the notion of chemical reaction, which,
in essence, is just regrouping of atoms that constitute molecules. As a result, reagent chemical
compounds are transformed into product compounds.
In the world of nuclear particles, similar processes are possible. When nuclei are close to each
other, nucleons from one nucleus can “jump” into another one. This happens because there are
attractive and repulsive forces between the nucleons. The complicated interplay of these forces
may cause their regrouping. As a result, the reagent particles are transformed into product
particles. Such processes are called nuclear reactions.
For example, when two isotopes 32 He collide, the six nucleons constituting them, can rearrange
in such a way that the isotope 42 He is formed and two protons are liberated. Similarly to chemical
reactions, this process is denoted as
3
2 He + 32 He −→ 42 He + p + p + 12.86 MeV . (19.3)
The same as in chemical reactions, nuclear reactions can also be either exothermic (i.e. releasing
energy) or endothermic (i.e. requiring an energy input). The above reaction releases 12.86 MeV
of energy. This is because the total mass on the left hand side of Eq. (19.3) is in 12.86 MeV
greater than the total mass of the products on the right hand side (you can check this using
Table 19.1).
Thus, when considering a particular nuclear reaction, we can always learn if it releases or
absorbs energy. For this, we only need to compare total masses on the left and right hand sides
of the equation. Now, you can understand why it is very convenient to express masses in the
units of energy.
Composing equations like (19.3), we should always check the superscripts and subscripts of
the nuclei in order to have the same number of nucleons and the same charge on both sides of the
equation. In the above example, we have six nucleons and the charge +4 in both the initial and
final states of the reaction. To make the checking of nucleon number and charge conservation
easier, sometimes the proton and neutron are denoted with superscripts and subscripts as well,
357
namely, 11 p and 10 n. In this case, all we need is to check that sum of superscripts and sum of
subscripts are the same on both sides of the equation.
19.7 Detectors
How can we observe such tiny tiny things as protons and α-particles? There is no microscope
that would be able to discern them. From the very beginning of the sub-atomic era, scientists
have been working on the development of special instruments that are called particle detectors.
These devices enable us either to register the mere fact that certain particle has passed through
certain point in space or to observe the trace of its path (the trajectory). Actually, this is as good
as watching the particle. Although the particle sizes are awfully small, when passing through
some substances, they leave behind visible traces of tens of centimeters in length. By measuring
the curvature of the trajectory of a particle deflected in electric or magnetic field, a physicist can
determine the charge and mass of the particle and thus can identify it.
19.7.1 Geiger counter

The most familiar device for registering charged particles is the Geiger counter. It cannot tell
you anything about the particle except the fact that it has passed through the counter. The
counter consists of a thin metal cylinder filled with gas. A wire electrode runs along the center
of the tube and is kept at a high voltage (∼ 2000 V) relative to the cylinder. When a particle
passes through the tube, it causes ionization of the gas atoms and thus an electric discharge
between the cylinder and the wire. The electric pulse can be counted by a computer or made to
produce a “click” in a loudspeaker. The number of counts per second tells us about intensity of
the radiation.
19.7.2 Fluorescent screen

The very first detector was the fluorescent screen. When a charged particle hits the screen, a
human eye can discern a flash of light at the point of impact. In fact, we all use this kind of
detectors every day when watching TV of looking at a computer (if it does not have an LCD
screen of course). Indeed, the images on the screens of their electron-ray tubes are formed by
the accelerated electrons.
19.7.3 Photo-emulsion
Another type of particle detector, dating back to Becquerel, is the nuclear photographic emulsion.
Passage of charged particles is recorded in the emulsion in the same way that ordinary black and
white photographic film records a picture. The only difference is that nuclear photoemulsion is
made rather thick in order to catch a significant part of the particle path. After the developing,
a permanent record of the charged particle trajectory is available.
19.7.4 Wilson’s chamber

In the fields of sub-atomic physics and nuclear physics, Wilson’s cloud chamber is the most fun-
damental device to observe the trajectories of particles. Its basic principle was discovered by C.
T. R. Wilson in 1897, and it was put to the practical use in 1911.
358
The top and the side of the chamber are covered with round glasses of several centimeters
in diameter. At the bottom of the chamber, a piston is placed. The air filled in the chamber
is saturated with vapor of water. When pulling down the piston quickly, the volume of the
chamber would be expanded and the temperature goes down. As a result, the air inside would
be supersaturated with the vapor. If a fast moving charged particle enters the chamber when
it is in such a supersaturated state, the vapor of water would condense along the line of the
ions generated by the particle, which is the path of the particle. Thus we can observe the trace,
and also take a photograph. To make clear the trace, a light is sometimes illuminated from the
side. When placing the cloud chamber in a magnetic field, we can obtain various informations
about the charged particle by measuring the curvature of the trace and other data. The bubble
chamber and the spark chamber have taken place of the cloud chamber which is nowadays used
only for the educational purposes. Wilson’s cloud chamber has however played a very important
role in the history of physics.
19.7.5 Bubble chamber

Bubble chamber is a particle detector of major importance during the initial years of high-energy
physics. The bubble chamber has produced a wealth of physics from about 1955 well into the
1970s. It is based on the principle of bubble formation in a liquid heated above its boiling point,
which is then suddenly expanded, starting boiling where passing charged particles have ionized
the atoms of the liquid. The technique was honoured by the Nobel prize award to D. Glaser
in 1960. Even today, bubble chamber photographs provide the aesthetically most appealing
visualization of subnuclear collisions.
19.7.6 Spark chamber

Spark chamber is a historic device using electric discharges over a gap between two electrodes
with large potential difference, to render passing particles visible. Sparks occurred where the gas
had been ionized. Most often, multiple short gaps were used, but wide-gap chambers with gaps
up to 40 cm were also built. The spark chamber is still of great scientific value in that it remains
relatively simple and cheap to build as well as enabling an observer to view the paths of charged
particles.
19.8 Nuclear energy

Nuclei can produce energy via two different types of reactions, namely, fission and fusion reac-
tions. Fission is a break up of a nucleus in two or more pieces (smaller nuclei). Fusion is the
opposite process: Formation of a bigger nucleus from two small nuclei.
A question may arise: How two opposite processes can both produce energy? Can we make
an inexhaustible souce of energy by breaking up and then fusing the same nuclei? Of cousre not!
The energy conservation law cannot be circumvented in no way. When speaking about fusion
and fission, we speak about different ranges of nuclei. Energy can only be released when either
light nuclei fuse or heavy nuclei fission.
To understand why this is so, let us recollect that for releasing energy the mass of initial
nuclei must be greater than the mass of the products of a nuclear reaction. The mass difference
is transformed into the released energy. And why the product nuclei can loose some mass as
compared to the initial nuclei? Because they are more tightly bound, i.e. their binding energies
359
are lager.
Fig. 19.3 shows the dependence of the binding energy B per nucleon on the number A of
nucleons constituting a nucleus. As you see, the curve reaches the maximum value of ∼ 9 MeV
per nucleon at around A ∼ 50. The nuclei with such number of nucleons cannot produce energy
neither through fusion nor through fission. They are kind of “ashes” and cannot serve as a fuel.
In contrast to them, very light nuclei, when fused with each other, make more tightly bound
products as well as very heavy nuclei do when split up in lighter fragments.
B/A, (MeV)
10 10
8 | {z } 8
| {z }
| {z }
6 - . 6
↑ ← fission ←
4 fusion 4
2 % 2
0 0
0 50 100 150 200 250
number of nucleons, A
Figure 19.3: Binding energy per nucleon.
In fission processes, which were discovered and used first, a heavy nucleus like, for example,
uranium or plutonium, splits up in two fragments which are both positively charged. These
fragments repel each other by an electric force and move apart at a high speed, distributing their
kinetic energy in the surrounding material.
In fusion reactions everything goes in the opposite direction. Very light nuclei, like hydrogen
or helium isotopes, when approaching each other to a distance of a few fm (1 fm = 10 −13 cm),
experience strong attraction which overpowers their Coulomb (that is electric) repulsion. As a
result the two nuclei fuse into a single nucleus. They collapse with extremely high speeds towards
each other. To form a stable nucleus they must get rid of the excessive energy. This energy is
emitted by ejecting a neutron or a photon.
19.8.1 Nuclear reactors

Since the discovery of radioactivity it was known that heavy nuclei release energy in the processes
of spontaneous decay. This process, however, is rather slow and cannot be influenced (speed up
or slow down) by humans and therefore could not be effectively used for large-scale energy pro-
duction. Nonetheless, it is ideal for feeding the devices that must work autonomously in remote
360
places for a long time and do not require much energy. For this, heat from the spontaneous-
decays can be converted into electric power in a radioisotope thermoelectric generator. These
generators have been used to power space probes and some lighthouses built by Russian engi-
neers. Much more effective way of using nuclear energy is based on another type of nuclear decay
which is considered next.
Chain reaction
The discovery that opened up the era of nuclear energy was made in 1939 by German physicists
O. Hahn, L. Meitner, F Strassmann, and O. Frisch. They found that a uranium nucleus, after
absorbing a neutron, splits into two fragments. This was not a spontaneous but induced fission
n + 235 140 94
92 U −→ 54 Xe + 38 Sr + n + n + 185 MeV (19.4)
that released ∼ 185 MeV of energy as well as two neutrons which could cause similar reactions
on surrounding nuclei. The fact that instead of one initial neutron, in the reaction (19.4) we
obtain two neutrons, is crucial. This gives us the possibility to make the so-called chain reaction
schematically shown in Fig. 19.4.
n
t
Un
t t
Un Un
t t t t
Un Un Un Un
t t t t t t t t
Figure 19.4: Chain reaction on uranium nuclei.
In such process, one neutron breaks one heavy nucleus, the two released neutrons break two
more heavy nuclei and produce four neutrons which, in turn, can break another four nuclei and
so on. This process develops extremely fast. In a split of a second a huge amount of energy can
be released, which means explosion. In fact, this is how the so-called atomic bomb works.
Can we control the development of the chain reaction? Yes we can! This is done in nuclear
reactors that produce energy for our use. How can it be done?
Critical mass
First of all, if the piece of material containing fissile nuclei is too small, some neutrons may reach
its surface and escape without causing further fissions. For each type of fissile material there
is therefore a minimal mass of a sample that can support explosive chain reaction. It is called
the critical mass. For example, the critical mass of 235 92 U is approximately 50 kg. If the mass is
361
below the critical value, nuclear explosion is not possible, but the energy is still released and the
sample becomes hot. The closer mass is to its critical value, the more energy is released and
more intensive is the neutron radiation from the sample.
The criticality of a sample (i.e. its closeness to the critical state) can be reduced by changing
its geometry (making its surface bigger) or by putting inside it some other material (boron or
cadmium) that is able to absorb neutrons. On the other hand, the criticality can be increased by
putting neutron reflectors around the sample. These reflectors work like mirrors from which the
escaped neutrons bounce back into the sample. Thus, moving in and out the absorbing material
and reflectors, we can keep the sample close to the critical state.
How a nuclear reactor works

In a typical nuclear reactor, the fuel is not in one piece, but in the form of several hundred
vertical rods, like a brush. Another system of rods that contain a neutron absorbing material
(control rods) can move up and down in between the fuel rods. When totally in, the control rods
absorb so many neutrons, that the reactor is shut down. To start the reactor, operator grad-
ually moves the control rods up. In an emergency situation they are dropped down automatically.
To collect the energy, water flows through the reactor core. It becomes extremely hot and
goes to a steam generator. There, the heat passes to water in a secondary circuit that becomes
steam for use outside the reactor enclosure for rotating turbines that generate electricity.
Nuclear power in South Africa

By 2004 South Africa had only one commercial nuclear reactor supplying power into the national
grid. It works in Koeberg located 30 km north of Cape Town. A small research reactor was also
operated at Pelindaba as part of the nuclear weapons program, but was dismantled.
Koeberg Nuclear Power station is a uranium Pressurized Water Reactor (PWR). In such a
reactor, the primary coolant loop is pressurised so the water does not boil, and heat exchangers,
called steam generators, are used to transmit heat to a secondary coolant which is allowed to boil
to produce steam. To remove as much heat as possible, the water temperature in the primary
loop is allowed to rise up to about 300 ◦ C which requires the pressure of 150 atmospheres (to
keep water from boiling).
The Koeberg power station has the largest turbine generators in the southern hemisphere
and produces ∼10000 MWh of electric energy. Construction of Koeberg began in 1976 and two
of its Units were commissioned in 1984-1985. Since then, the plant has been in more or less
continuous operation and there have been no serious incidents.
Eskom that operates this power station, may be the current technology leader. It is de-
veloping a new type of nuclear reactor, a modular pebble-bed reactor (PBMR). In contrast to
traditional nuclear reactors, in this new type of reactors the fuel is not assembled in the form of
rods. The uranium, thorium or plutonium fuels are in oxides (ceramic form) contained within
spherical pebbles made of pyrolitic graphite. The pebbles, having a size of a tennis ball, are in
a bin or can. An inert gas, helium, nitrogen or carbon dioxide, circulates through the spaces
between the fuel pebbles. This carries heat away from the reactor.
362
Ideally, the heated gas is run directly through a turbine. However since the gas from the
primary coolant can be made radioactive by the neutrons in the reactor, usually it is brought to
a heat exchanger, where it heats another gas, or steam.
The primary advantage of pebble-bed reactors is that they can be designed to be inherently
safe. When a pebble-bed reactor gets hotter, the more rapid motion of the atoms in the fuel
increases the probability of neutron capture by 23892 U isotopes through an effect known as Doppler
broadening. This isotope does not split up after capturing a neutron. This reduces the number of
neutrons available to cause 235
92 U fission, reducing the power output by the reactor. This natural
negative feedback places an inherent upper limit on the temperature of the fuel without any
operator intervention.
The reactor is cooled by an inert, fireproof gas, so it cannot have a steam explosion as a water
reactor can.
A pebble-bed reactor thus can have all of its supporting machinery fail, and the reactor will
not crack, melt, explode or spew hazardous wastes. It simply goes up to a designed ”idle” tem-
perature, and stays there. In that state, the reactor vessel radiates heat, but the vessel and fuel
spheres remain intact and undamaged. The machinery can be repaired or the fuel can be removed.
A large advantage of the pebble bed reactor over a conventional water reactor is that they op-
erate at higher temperatures. The reactor can directly heat fluids for low pressure gas turbines.
The high temperatures permit systems to get more mechanical energy from the same amount of
thermal energy.
Another advantage is that fuel pebbles for different fuels might be used in the same basic
design of reactor (though perhaps not at the same time). Proponents claim that some kinds of
pebble-bed reactors should be able to use thorium, plutonium and natural unenriched Uranium,
as well as the customary enriched uranium. One of the projects in progress is to develop pebbles
and reactors that use the plutonium from surplus or expired nuclear explosives.
On June 25, 2003, the South African Republic’s Department of Environmental Affairs and
Tourism approved ESKOM’s prototype 110 MW pebble-bed modular reactor for Koeberg. Eskom
also has approval for a pebble-bed fuel production plant in Pelindaba. The uranium for this fuel
is to be imported from Russia. If the trial is successful, Eskom says it will build up to ten local
PBMR plants on South Africa’s seacoast. Eskom also wants to export up to 20 PBMR plants
per year. The estimated export revenue is 8 billion rand a year, and could employ about 57000
people.
19.8.2 Fusion energy

For a given mass of fuel, a fusion reaction like
2
1H + 31 H −→ 42 He + n + 17.59 MeV . (19.5)
yield several times more energy than a fission reaction. This is clear from the curve given in
Fig. 19.3. Indeed, a change of the binding energy (per nucleon) is much more significant for a
fusion reaction than for a fission reaction. Fusion is, therefore, a much more powerful source
of energy. For example, 10 g of Deuterium which can be extracted from 500 litres of water and
15 g of Tritium produced from 30 g of Lithium would give enough fuel for the lifetime electricity
363
needs of an average person in an industrialised country.
But this is not the only reason why fusion attracted so much attention from physicists. An-
other, more fundamental, reason is that the fusion reactions were responsible for the synthesis
of the initial amount of light elements at primordial times when the universe was created. Fur-
thermore, the synthesis of nuclei continues inside the stars where the fusion reactions produce
all the energy which reaches us in the form of light.
Thermonuclear reactions
If fusion is so advantageous, why is it not used instead of fission reactors? The problem is in the
electric repulsion of the nuclei. Before the nuclei on the left hand side of Eq. (19.5) can fuse,
we have to bring them somehow close to each other to a distance of ∼ 10 −13 cm. This is not an
easy task! They both are positively charged and “refuse” to approach each other.
What we can do is to make a mixture of the atoms containing such nuclei and heat it up.
At high temperatures the atoms move very fast. They fiercely collide and loose all the electrons.
The mixture becomes plasma, i.e. a mixture of bare nuclei and free moving electrons. If the
temperature is high enough, the colliding nuclei can overcome the electric repulsion and approach
each other to a fusion distance.
When the nuclei fuse, they release much more energy than was spent to heat up the plasma.
Thus the initial energy “investment” pays off. The typical temperature needed to ignite the
reaction of the type (19.5) is extremely high. In fact, it is the same temperature that our sun
has in its center, namely, ∼15 million degrees. This is why the reactions (19.3), (19.5), and the
like are called thermonuclear reactions.
Human-made thermonuclear reactions

The same as with fission reactions, the first application of thermonuclear reactions was in
weapons, namely, in the hydrogen bomb, where fusion is ignited by the explosion of an ordi-
nary (fission) plutonium bomb which heats up the fuel to solar temperatures.
In an attempt to make a controllable fusion, people encounter the problem of holding the
plasma. It is relatively easy to achieve a high temperature (with laser pulses, for example). But
as soon as plasma touches the walls of the container, it immediately cools down. To keep it
from touching the walls, various ingenious methods are tried, such as strong magnetic field and
laser beams directed to plasma from all sides. In spite of all efforts and ingenious tricks, all such
attempts till now have failed. Most probably this straightforward approach to controllable fusion
is doomed because one has to hold in hands a “piece of burning sun”.
Cold fusion
To visualize the struggle of the nuclei approaching each other, imagine yourself pushing a metallic
ball towards the top of a slope shown in Fig. 19.5. The more kinetic energy you give to the ball,
the higher it can climb. Your purpose is to make it fall into the narrow well that is behind the
barrier.
364
Coulomb
barrier
¡
Veff ¡
ª
projectile
¾
x
R
Figure 19.5: Effective nucleus–nucleus potential as a function of the separation between the nuclei.
In fact, the curve in Fig. 19.5 shows the dependence of relative potential energy V eff between
two nuclei on the distance R separating them. The deep narrow well corresponds to the strong
short-range attraction, and the ∼ 1/R barrier represents the Coulomb (electric) repulsion. The
nuclei need to overcome this barrier in order to “touch” each other and fuse, i.e. to fall into the
narrow and deep potential well. One way to achieve this is to give them enough kinetic energy,
which means to rise the temperature. However, there is another way based on the quantum laws.
As you remember, when discussing the motion of the electron inside an atom (see Sec. 19.1),
we said that it formed a “cloud” of probability around the nucleus. The density of this cloud
diminishes at very short and very long distances but never disappears completely. This means
that we can find the electron even inside the nucleus though with a rather small probability.
The nuclei moving towards each other, being microscopic objects, obey the quantum laws as
well. The probability density for finding one nucleus at a distance R from another one also forms
a cloud. This density is non-zero even under the barrier and on the other side of the barrier.
This means that, in contrast to classical objects, quantum particles, like nuclei, can penetrate
through potential barriers even if they do not have enough energy to go over it! This is called
the tunneling effect.
The tunneling probability strongly depends on thickness of the barrier. Therefore, instead of
lifting the nuclei against the barrier (which means rising the temperature), we can try to make
the barrier itself thinner or to keep them close to the barrier for such a long time that even a
low penetration probability would be realized.
How can this be done? The idea is to put the nuclei we want to fuse, inside a molecule where
they can stay close to each other for a long time. Furthermore, in a molecule, the Coulomb
barrier becomes thinner because of electron screening. In this way fusion may proceed even at
365
room temperature.
This idea of cold fusion was originally (in 1947) discussed by F. C. Frank and (in 1948) put
forward by A. D. Sakharov, the “father” of Russian hydrogen bomb, who at the latest stages
of his career was worldwide known as a prominent human rights activist and a winner of the
Nobel Prize for Peace. When working on the bomb project, he initiated research into peaceful
applications of nuclear energy and suggested the fusion of two hydrogen isotopes via the reaction
(19.5) by forming a molecule of them where one of the electrons is replaced by a muon.
The muon is an elementary particle (see Sec. 19.9), which has the same characteristics as
an electron. The only difference between them is that the muon is 200 times heavier than the
electron. In other words, a muon is a heavy electron. What will happen if we make a muonic
atom of hydrogen, that is a bound state of a proton and a muon? Due to its large mass the
muon would be very close to the proton and the size of such atom would be 200 times smaller
than that of an ordinary atom. This is clearly seen from the formula for the atomic Bohr radius
~2
RBohr = ,
me2
where the mass is in the denominator.
Now, what happens if we make a muonic molecule? It will also be 200 times smaller than an
ordinary molecule. The Coulomb barrier will be 200 times thinner and the nuclei 200 times closer
to each other. This is just what we need! Speaking in terms of the effective nucleus–nucleus
potential shown in Fig. 19.5, we can say that the muon modifies this potential in such a way
that a second minimum appears. Such a modified potential is (schematically) shown in Fig. 19.6.
probability density
¡
Veff ª
¡
x R
Figure 19.6: Effective nucleus–nucleus potential (thick curve) for nuclei confined in a molecule. Thin
curve shows the corresponding distribution of the probability for finding the nuclei at a given distance
from each other.
The molecule is a bound state in the shallow but wide minimum of this potential. Most of
366
the time, the nuclei are at the distance corresponding to the maximum of the probability density
distribution (shown by the thin curve). Observe that this density is not zero under the barrier
(though is rather small) and even at R = 0. This means that the system can (with a small proba-
bility) jump from the shallow well into the deep well through the barrier, i.e. can tunnel and fuse.
Unfortunately, the muon is not a stable particle. Its lifetime is only ∼ 10 −6 sec. This means
that a muonic molecule cannot exist longer than 1 microsecond. As a matter of fact, from a
quantum mechanical point of view, this is quite a long interval.
The quantum mechanical wave function (that describes the probability density) oscillates
with a frequency which is proportional to the energy of the system. With a typical binding
energy of a muonic molecule of 300 eV this frequency is ∼ 1017 s−1 . This means that the particle
hits the barrier with this frequency and during 1 microsecond it makes 10 11 attempts to jump
through it. The calculations show that the penetration probability is ∼ 10 −7 . Therefore, during
1 microsecond nuclei can penetrate through the barrier 10000 times and fusion can happen much
faster than the decay rate of the muon.
Cold fusion via the formation of muonic molecules was done in many laboratories, but un-
fortunately, it cannot solve the problem of energy production for our needs. The obstacle is
the negative efficiency, i.e. to make muonic cold fusion we have to spend more energy than it
produces. The reason is that muons do not exist like protons or electrons. We have to produce
them in accelerators. This takes a lot of energy.
Actually, the muon serves as a catalyst for the fusion reaction. After helping one pair of
nuclei to fuse, the muon is liberated from the molecule and can form another molecule, and
so on. It was estimated that the efficiency of the energy production would be positive only if
each muon ignited at least 1000 fusion events. Experimentalists tried their best, but by now the
record number is only 150 fusion events per muon. This is too few. The main reason why the
muon does not catalyze more reactions is that it is eventually trapped by a 4 He nucleus which
is a by-product of fusion. Helium captures the muon into an atomic orbit with large binding
energy, and it cannot escape.
Nonetheless, the research in the field of cold fusion continues. There are some other ideas of
how to keep nuclei close to each other. One of them is to put the nuclei inside a crystal. Another
way out is to increase the penetration probability by using molecules with special properties,
namely, those that have quantum states with almost the same energies as the excited states on
the compound nucleus. Scientists try all possibilities since the energy demands of mankind grow
continuously and therefore the stakes in this quest are high.
19.9 Elementary particles

In our quest for the elementary building blocks of the universe, we delved inside atomic nucleus
and found that it is composed of protons and neutrons. Are the three particles, e, p, and n,
the blocks we are looking for? The answer is “no”. Even before the structure of the atom
was understood, Becquerel discovered the redioactivity (see Sec. 19.5.1) that afterwards puzzled
physicists and forced them to look deeper, i.e. inside protons and neutrons.
367
19.9.1 β decay
Among the three types of radioactivity, the α and γ rays were easily explained. The emission of α
particle is kind of fission reaction, when an initial nucleus spontaneously decays in two fragments
one of which is the nucleus 42 He (i.e. α particle). The γ rays are just electromagnetic quanta
emitted by a nuclear system when it transits from one quantum state to another (the same like
an atom emits light).
The β rays posed the puzzle. On the one hand, they are just electrons and you may think
that it looks simple. But on the other hand, they are not the electrons from the atomic shell. It
was found that they come from inside the nucleus! After the β-decay, the charge of the nucleus
increases in one unit,
A A
Z (parent nucleus) −→ Z+1 (daughter nucleus) + e ,
which is in accordance with the charge conservation law.
There was another puzzle associated with the β decay: The emitted electrons did not have
a certain energy. Measuring their kinetic energies, you could find very fast and very slow elec-
trons as well as the electrons with all intermediate speeds. How could identical parent nuclei,
after loosing different amount of energy, become identical daughter nuclei. May be energy is not
conserving in the quantum world? The fact was so astonishing that even Niels Bohr put forward
the idea of statistical nature of the energy conservation law.
To explain the first puzzle, it was naively suggested that neutron is a bound state of proton
and electron. At that time, physicists believed that if something is emitted from an object, this
something must be present inside that object before the emission. They could not imagine that
a particle could be created from vacuum.
The naive (pe) model of the neutron contradicted the facts. Indeed, it was known already that
the pe bound state is the hydrogen atom. Neutron is much smaller than the atom. Therefore, it
would be unusually tight binding, and perhaps with something elese involved that keeps the size
small. By the way, this “something elese” could also save the energy conservation law. In 1930,
Wolfgang Pauli suggested that in addition to the electron, the β decay involves another particle,
ν, that is emitted along with the electron and carries away part of the energy. For example,
234
90 Th −→ 234
91 Pa + e− + ν̄ . (19.6)
This additional particle was called neutrino (in Italian the word “neutrino” means small neutron).
The neutrino is electrically neutral, has extremely small mass (maybe even zero, which is still
a question in 2004) and very weakly interacts with matter. This is why it was not detected
experimentally till 1956. The “bar” over ν in Eq. (19.6) means that in this reaction actually the
anti-neutrino is emitted (see the discussion on anti-particles further down in Sec. 19.9.2).
19.9.2 Particle physics

In an attempt to explain the β decay and to understand internal structure of the neutron a new
branch of physics was born, the particle physics. The only way to explore the structure of sub-
atomic particles is to strike them with other particles in order to knock out their “constituent”
parts. The simple logic says: The more powerful the impact, the smaller parts can be knocked
368
out.
At the beginning the only source of energetic particles to strike other particles were the
cosmic rays. Earth is constantly bombarded by all sort of particles coming from the outer space.
Atmosphere protects us from most of them, but many still reach the ground.
Antiparticles
In 1932, studying the cosmic rays with a bubble chamber, Carl Anderson made a photograph of
two symmetrical tracks of charged particles. The measurements of the track curvatures showed
that one track belonged to an electron and the other was made by a particle having the same
mass and equal but positive charge. These particles were created when a cosmic γ quantum of
a high energy collided with a nucleus.
The discovered particle was called positron and denoted as e+ to distinguish it from the elec-
tron, which sometimes is denoted as e− . It was the first antiparticle discovered. Later, it was
found that every particle has its “mirror reflection”, the antiparticle. To denote an antiparticle,
it is used “bar” over a particle symbol. For example, p̄ is the anti-proton, which has the same
mass as an ordinary proton but a negative charge.
When a particle collides with its “mirror reflection”, they annihilate, i.e. they burn out
completely. In this collision, all their mass is transformed into electromagnetic energy in the
form of γ quanta. For example, if an electron collides with a positron, the following reaction
may take place
e− + e+ −→ γ + γ , (19.7)
where two photons are needed to conserve the total momentum of the system.
In principle, stable antimatter can exist. For example, the pair of p̄ and e+ can form an atom
of anti-hydrogen with exactly the same energy states as the ordinary hydrogen. Experimentally,
atoms of anti-helium were obtained. The problem with them is that, surrounded by ordinary
matter, they cannot live long. Colliding with ordinary atoms, they annihilate very fast.
There are speculations that our universe should be symmetric with respect to particles and
antiparticles. Indeed, why should preference be given to matter and not to anti-matter? This
implies that somewhere very far, there must be equal amount of anti-matter, i.e. anti-universe.
Can you imagine what happens if they meet?
Muon, mesons, and the others

In yet another cosmic-ray experiment a particle having the same properties as the electron but
∼207 times heavier, was discovered in 1935. It was given the name muon and the symbol µ. For
a long time it remained “unnecessary” particle in the picture of the world. Only the modern
theories harmonically included the muon as a constituent part of matter (see Sec 19.9.3).
The same inexhaustible cosmic rays revealed the π and K mesons in 1947. The π mesons
(or simply pions) were theoretically predicted twelve years before by Yukawa, as the mediators
of the strong forces between nucleons. The K mesons, however, were unexpected. Furthermore,
they showed very strange behaviour. They were easily created only in pairs. The probability
369
of the inverse process (i.e. their decay) was 1013 times lower than the probability of their creation.
It was suggested that these particles possess a new type of charge, the strangeness, which is
conserving in the strong interactions. When a pair of such particles is created, one of them has
strangeness +1 and the other −1, so the total strangeness remains zero. When decaying, they act
individually and therefore the strangeness is not conserving. According to the suggestion, this is
only possible through the weak interactions that are much weaker than the strong interactions
(see Sec. 19.9.4) and thus the decay probability is much lower.
The golden age of particle physics began in 1950-s with the advent of particle accelerators,
the machines that produced beams of electrons or protons with high kinetic energy. Having
such beams available, experimentalists can plan the experiment and repeat it, while with the
cosmic rays they were at the mercy of chance. When the accelerators became the main tool of
exploration, the particle physics acquired its second name, the high energy physics.
During the last half a century, experimentalists discovered so many new particles (few of
them are listed in Table 19.3) that it became obvious that they cannot all be elementary. When
colliding with each other, they produce some other particles. Mutual transformations of the
particles is their main property.
family particle symbol mass (MeV) Lifetime T1/2 (s)

photon photon γ 0 stable
electron e − , e+ 0.511 stable
muon µ − , µ+ 105.7 2.2 × 10−6
leptons tau τ −, τ + 1777 10−13
electron neutrino νe ∼0 stable
muon neutrino νµ ∼0 stable
tau neutrino ντ ∼0 stable
pion π+ , π− 139.6 2.6 × 10−8
pion π0 135.0 0.8 × 10−16
kaon K , K−
+
493.7 1.2 × 10−8
kaon KS0 497.7 0.9 × 10−10
hadrons kaon KL0 497.7 5.2 × 10−8
eta meson η0 548.8 10−18
proton p 938.3 stable
neutron n 939.6 900
lambda Λ0 1116 2.6 × 10−10
sigma Σ+ 1189 0.8 × 10−10
sigma Σ0 1192 6 × 10−20
sigma Σ− 1197 1.5 × 10−10
−
omega Ω , Ω+ 1672 0.8 × 10−10
Table 19.3: Few representatives of different particle families.
Physicists faced the problem of particle classification similar to the problems of classification
of animals, plants, and chemical elements. The first approach was very simple. The particles were
divided in four groups according to their mass: leptons (light particles, like electron), mesons
(intermediate mass, like pion), baryons (heavy particles, like proton or neutron), and hyperons
370
(very heavy particles).
Then it was realized that it would be more logical to divide the particles in three families
according to their ability to interact via weak, electromagnetic, and strong forces (in addition to
that, all particles experience gravitational attraction towards each other). Except for the grav-
itational interaction, the photon (γ quantum) participates only in electromagnetic interactions,
the leptons take part in both weak and electromagnetic interactions, and hadrons are able to
interact via all forces of nature (see Sec. 19.9.4).
In addition to conservation of the strangeness, several other conservation laws were discov-
ered. For example, number of leptons is conserving. This is why in the reaction (19.6) we have an
electron (lepton number +1) and anti-neutrino (lepton number −1) in the final state. Similarly,
the number of baryons is conserving in all reactions.
The quest for the constituent parts of the neutron has led us to something unexpected. We
found that there are several hundreds of different particles that can be “knocked out” of the
neutron but none of them are its parts. Actually, the neutron itself can be knocked out of some
of them! What a mess! Further efforts of experimentalists could not find an order, which was
finally discovered by theoreticians who introduced the notion of quarks.
19.9.3 Quarks and leptons

While experimentalists seemed to be lost in the maze, the theoreticians groped for the way out.
Using an extremely complicated mathematical technique, they managed to group the hadrons
in such families which implied that all known (and yet unknown) hadrons are build of only six
types of particles with fractional charges. The main credit for this (in the form of Nobel Prize)
was given to M. Gell-Mann and G. Zweig.
At first, they considered a subset of the hadrons and developed a theory with only three types
of such truly elementary particles. When Murray Gell-Mann thought of the name for them, he
came across the book ”Finnegan’s Wake” by James Joyce. The line ”Three quarks for Mister
Mark...” appeared in that fanciful book (in German, the word “quark” means cottage cheese).
He needed a name for three particles and this was the answer. Thus the term quark was coined.
Later, the theory was generalized to include all known particles, which required six types of
quarks. Modern theories require also that the number of different leptons should be the same
as the number of different quark types. According to these theories, the quarks and leptons are
truly elementary, i.e. they do not have any internal structure and therefore are of a zero size
(pointlike). Thus, the world is constructed of just twelve types of elementary building blocks
that are given in Table 19.4. Amazingly enough, the electron that was discovered before all other
particles, more than a century ago, turned out to be one of them!
After Gell-Mann, who used a funny name (quark) for an elementary particle, the fundamental
physics was flooded with such names. For example, the six quark types are called flavors (for
cottage cheese, this is appropriate indeed), the three different states in which each quark can be,
are called colors (red, green, blue), etc. Modern physics is so complicated and mathematical,
that people working in it, need such kind of jokes to “spice unsavoury dish with flavors”. The
funny names should not confuse anybody. Elementary particles do not have any smell, taste,
or colour. These terms simply denote certain properties (similar to electric charge) that do not
371
lepton baryon
family elementary particle symbol charge number number mass (MeV)
electron e− −1 1 0 0.511
muon µ− −1 1 0 105.7
−
leptons tau τ −1 1 0 1777
electron neutrino νe 0 1 0 ∼0
muon neutrino νµ 0 1 0 ∼0
tau neutrino ντ 0 1 0 ∼0
up u +2/3 0 1/3 360
down d −1/3 0 1/3 360
quarks strange s −1/3 0 1/3 1500
charmed c +2/3 0 1/3 540
top (truth) t +2/3 0 1/3 174000
bottom (beauty) b −1/3 0 1/3 5000
Table 19.4: Elementary building blocks of the universe.
exist in human world.
Hadrons
There are particles that are able to interact with each other by the so-called strong forces. An-
other name for these forces is nuclear forces. They are very strong at short distances (∼ 10 −15 m),
and very quickly vanish when the distance between the particles increases. All these particles
are called hadrons. The protons and neutrons are examples of hadrons.
As you remember, we learned about the existence of huge variety of particles when trying to
look inside a nucleon, more particularly, the neutron. So, what the neutron is made of? Can we
get the answer at last, after learning about the quarks? Yes, we can.
According to modern theories, all hadrons are composed of quarks. The quarks can be com-
bined in groups of two or three. The bound states of two quarks are called mesons, and the bound
complexes of three quarks are called baryons. No other numbers of quarks can form observable
particles1 .
Nucleons are baryons and therefore consist of three quarks while the pion is a meson con-
taining only two quarks, as schematically shown in Fig. 19.7. Comparing this figure with Table
19.4, you can see why quarks have fractional charges. Counting the total charge of a hadron,
you should not forget that anti-quarks have the opposite charges. The baryon number for an
anti-quark also has the opposite sign (negative). This is why mesons actually consist of a quark
and anti-quark in order to have total baryon number zero.
1 Recently, experimentalists and theoreticians started to actively discuss the possibility of the existence of
pentaquarks, exotic particles that are bound complexes of five quarks.
372
º·
º· º·
º·
u u º·
º·
d d
º·
¹¸¹¸ º·
¹¸¹¸ u d¯
u ¹¸
¹¸
d
¹¸ ¹¸
proton neutron π + meson
Figure 19.7: Quark content of the proton, neutron, and π + -meson.
Particle reactions
At the early stages of the particle physics development, in order to find the constituent parts of
various particles, experimentalists simply collided them and watched the “fragments”. However,
this straightforward approach led to confusion. For example, the reaction between the π − meson
and proton,
π − + p −→ K 0 + Λ0 , (19.8)
would suggest (if naively interpreted) that either K 0 or Λ0 is a constituent part of the nucleon
while the pion is incorporated into the other “fragment”. On the other hand, the same collision
can knock out different “fragments” from the same proton. For example,
π − + p −→ π 0 + n , (19.9)
which leads to an absurd suggestion that neutron is a constituent part of proton.
The quark model explains all such “puzzles” nicely and logically. Similarly to chemical reac-
tions that are just rearrangements of atoms, the particle reactions of the type (19.8) and (19.9)
are just rearrangements of the quarks. The only difference is that, in contrast to chemistry where
the number of atoms is not changing, the number of quarks before the collision is not necessarily
equal to their number after the collision. This is because a quark from one colliding particle can
annihilate with the corresponding antiquark from another particle. Moreover, if the collision is
sufficiently powerful, the quark-antiquark pairs can be created from vacuum.
It is convenient to depict the particle transformations in the form of the so-called quark flow
diagrams. On such diagrams, the quarks are represented by lines that may be visualized as the
trajectories showing their movement from the left to the right.
For example, the diagram given in Fig. (19.8), shows the quark rearrangement for the reac-
tion (19.8). As you can see, when the pion collides with proton, its ū quark annihilates with the
u quark from the proton. At the same time, the ss̄ pair is created from the vacuum. Then, the
s̄ quark binds with the d quark to form the strange meson K 0 , while the s quark goes together
with the ud pair as the strange baryon Λ0 .
The charge-exchange reaction (19.9) is a more simple rearrangement process shown in Fig.
19.9. You may wonder why the quark and antiquark of the same flavor in the π 0 meson do not
annihilate. Yes they do, but not immediately. And due to this annihilation, the lifetime of π 0 is
100 million times shorter than the lifetime of π ± (see Table 19.3).
373
½ d d ¾
−
π K0
ū s̄
( u s )
p u u Λ0
d d
Figure 19.8: Quark-flow diagram for the reaction π − + p −→ K 0 + Λ0 .
½ ū ū ¾
π− π0
d u
( u d )
p u u n
d d
Figure 19.9: Quark-flow diagram for the reaction π − + p −→ π 0 + n .
Despite its simplicity, the quark-flow diagram technique is very powerful method not only
for explaining the observed reactions but also for predicting new reactions that have not yet
been seen in experiments. Knowing the quark content of particles (which is available in modern
Physics Handbooks), you can draw plenty of such diagrams that will describe possible particle
transformations. The only rule is to keep the lines continuous. They can disappear or emerge
only for a quark-antiquark pair of the same flavor.
However, the continuity of the quark lines is valid only for the processes caused by the strong
interaction. Indeed, the β-decay of a free neutron (caused by the weak forces),
n −→ p + e− + ν̄e , (19.10)
as well as the β-decay of the nuclei, indicate that quarks can change flavor. In particular, the
β-decay (19.10) or (19.6) happens because the d quark transformes into the u quark,
d −→ u + e− + ν̄e , (19.11)
due to the weak interaction, as shown in Fig. 19.10
Quark confinement
At this point, it is very logical to ask if anybody observed an isolated quark. The answer is
“no”. Why? And how can one be so confident of the quark model when no one has ever seen an
374
ν̄e
e−
( d x u)
n u u p
d d
Figure 19.10: Quark-flow diagram for the β decay of neutron.
isolated quark?
Basically, you can’t see an isolated quark because the quark-quark attractive force does not
let them go. In contrast to all other systems, the attraction between quarks grows with the
distance separating them. It is like a rubber cord connecting two balls. When the balls are close
to each other, the cord is not stretched and the balls do not feel any force. If, however, you try
to separate the balls, the cord pulls them back. The more you stretch the cord, the stronger the
force becomes (according to the Hook’s law of elasticity). Of course, a real rubber cord would
eventually break. This does not happen with the quark-quark force. It can grow to infinity. This
phenomenon is called the confinement of quarks.
Nonetheless, we are sure that the nucleon consists of three quarks having fractional charges.
A hundred years ago Rutherford, by observing the scattering of charged particles from an atom,
proved that its positive charge is concentrated in a small nucleus. Nowadays, similar experiments
prove the existence of fractional point-like charges inside the nucleon.
The quark model actually is much more complicated than the quark-flow diagrams. It is a
consistent mathematical theory that explains a vast variety of experimental data. This is why
nobody doubts that it reflects the reality.
19.9.4 Forces of nature

If asked how many types of forces exist, many people start counting on their fingers, and when
the count exceeds ten, they answer “plenty of”. Indeed, there are gravitational forces , electrical,
magnetic, elastic, frictional forces, and also forces of wind, of expanding steam, of contracting
muscles, etc.
If, however, we analyze the root causes of all these forces, we can reduce their number to just
a few fundamental forces (or fundamental interactions, as physicists say).
For example, the elastic force of a stretched rubber cord is due to the attraction between the
molecules that the rubber is made of. Looking deeper, we find that the molecules attract each
other because of the electromagnetic attraction between the electrons of one molecule and nuclei
of the other. Similarly, if we depress a piece of rubber, it resists because the molecules refuse to
approach each other too close due to the electric repulsion of the nuclei. Therefore the elasticity
375
of rubber has the electromagnetic origin.
Any other force in the human world can be analyzed in the same manner. After doing this,
we will find that all forces that we see around us (in the macroworld), are either of gravitational
or electromagnetic nature. As we also know, in the microworld there are two other types of
forces: The strong (nuclear) forces that act between all hadrons, and the weak forces that are
responsible for changing the quark flavors.
Therefore, all interactions in the Universe are governed by only four fundamental forces:
Strong, electromagnetic, weak and gravitational. These forces are very different in strength and
range. Their relative strengths are given in Table 19.5. The most strong is the nuclear interac-
tion. The strength of the electromagnetic forces is one hundred times lower. The weak forces
are nine orders of magnitude weaker than the nuclear forces, and the gravity is 38 orders of
magnitude weaker! It is amazing that this subtle interaction governs the cosmic processes. The
reason is that the gravitational forces are of long range and always attractive. There is no such
thing as negative mass that would screen the gravitational field, like negative electrons screen
the field of positive nuclei.
Force Relative Strength Range
Strong 1 Short
Electromagnetic 0.0073 Long
Weak 10−9 Very Short
Gravitational 10−38 Long
Table 19.5: Four fundamental forces and their relative strengths.
Towards the unified force

Physicists always try to simplify things. Since there are only four fundamental forces, it is tempt-
ing to ask ”If only four, then why not only one?”. Can it be that all interactions are just different
faces of one master force?
The first who started the quest for unification of forces was Einstein. After completing his
general theory of relativity, he spent 30 years in unsuccessful attempts to unify the electromag-
netic and gravity forces. At that time, it seemed logical because both of them were infinite in
range and obeyed the same inverse square law. Einstein failed because the unification should be
done on the basis of quantum laws, but he tried to do it using the classical concepts.
Electro-weak unification
Now it is known that despite the similarities in form of the gravity and electromagnetic forces,
the gravity will be the last to yield to unification. The more implausible unification of the electro-
376
magnetic and weak forces turned out to be the first successful step towards the unified interaction.
In 1979, the Nobel prize was awarded to Weinberg, Salam, and Glashow, who developed a
unified theory of electromagnetic and weak interactions. According to that theory, the electro-
magnetic and weak forces converge to one electro-weak interaction at very high collision energies.
The theory also predicted the existence of heavy particles, the W and Z, with masses around
80000 MeV and 90000 MeV, respectively. These particles were discovered in 1983, which brought
experimental verification to the new theory.
Grand unification
The next step was to try to combine the electro-weak theory with the theory of the strong interac-
tions (i.e. quark theory) in a single theory. This work was called the grand unification. Currently,
physicists discuss versions of such theory that predicts the convergence of the three forces at aw-
fully high energies ∼ 1017 MeV. The quarks and leptons in this theory, are the unified leptoquarks.
The grand unification is not that successful as the electro-weak theory. It has the problem
of mathematical consistency and contradicts to at least one experiment. The matter is that it
predicts the proton decay,
p −→ e+ + π 0 ,
that does not conserve both the baryon and lepton numbers, with the lifetime of ∼ 10 29 years.
The measurements show, however, that the lifetime of the proton is at least 10 32 years.
Theory of everything
Some people believe that the grand unification has an inherent principal flaw. According to
them, one cannot unify the forces step by step (leaving the gravity out), and the correct way is
to combine all four forces in the so-called theory of everything.
There are few different approaches to unifying everything. One of them suggests that all
fundamental particles (quarks and leptons) are just vibrating modes of string loops in multidi-
mensional space. The electron is a string vibrating one way, the up-quark is a string vibrating
another way, and so on. The other approach introduces a new level of fundamental particles, the
preons, that could be constituent parts of quarks and leptons. The quest goes on.
Everyone agrees that constructing the theory of everything would in no way mean that biology,
geology, chemistry, or even physics had been solved. The universe is so rich and complex that the
discovery of the fundamental theory would not mean the end of science. The ultimate theory of
everything would provide an unshakable pillar of coherence forever assuring us that the universe
is a comprehensible place.
19.10 Origin of the universe

Looking deep inside microscopic particles, physicists need to collide them with high kinetic en-
ergies. The smaller parts of matter they want to observe, the higher energy they need. This is
why they build more and more powerful accelerators. However, the accelerators have natural
limitations. Indeed, an accelerator cannot be bigger than the size of our planet. And even if we
manage to build a circular accelerator around the whole earth (along the equator, for example),
377
it would not be able to reach the energy of ∼ 1017 MeV at which the grand unification of funda-
mental interactions takes place.
So, what are we to do? How can we test the theory of everything? Is it possible at all?
Yes, it is! The astronomically high values, like ∼ 1017 MeV, should be looked for in the cosmos,
of course. Our journey towards extremely small objects eventually leads us to extremely large
objects, like whole universe.
Equations of Einstein’s theory of relativity can describe the evolution of the universe. Physi-
cists solved these equations back in time and found that the universe had its beginning. Approx-
imately 15 billion years ago, it started from a zero size point that exploded and rapidly expanded
to the present tremendous scale. At the first instants after the explosion, the matter was at such
incredibly high density and temperature that all particles had kinetic energies even higher than
the unification energy ∼ 1017 MeV. This means that at the very beginning there was only one
sigle force and no difference among fundamental particles. Everything was unified and “simple”.
You may ask “So what? How can so distant past help us?”. In many ways! The develop-
ment of the universe was governed by the fundamental forces. If our theories about them are
correct, we should be able to reproduce (with calculations) how that development proceeded
step by step. During the expansion, all the nuclei and atoms in the cosmos were created. The
amounts of different nuclei are not the same. Why? Their relative abundances were determined
by the processes in the first moments after the explosion. Thus, comparing what follows from the
theories with the observed abundances of chemical elements, we can judge validity of our theories.
Nowadays, the most popular theory, describing the history of the universe, is the so–called
Big-Bang model. The diagram given in Fig. 19.11, shows the sequence of events which led to the
creation of matter in its present form.
Nobody knows what was before the Big Bang and why it happened, but it is assumed that
just after this enigmatic cataclysm, the universe was so dense and hot that all four forces of
nature (strong, electromagnetic, weak, and gravitational) were indistinguishable and therefore
gravity was governed by quantum laws, like the other three types of interactions. A complete
theory of quantum gravity has not been constructed yet, and this very first “epoch” of our his-
tory remains as enigmatic as the Big Bang itself.
The ideal “democracy” (equality) among the forces lasted only a small fraction of a second.
By the time t ∼ 10−43 sec the universe cooled down to ∼ 1032 K and the gravity separated.
The other three forces, however, remained unified into one universal interaction mediated by an
extremely heavy particle, the so-called X boson, which could transform leptons into quarks and
vice versa.
When at t ∼ 10−35 sec most of the X bosons decayed, the quarks combined in trios and pairs
to form nucleons, mesons, and other hadrons. The only symmetry which lasted up to ∼ 10 −10 sec,
was between the electromagnetic and weak forces mediated by the Z and W particles. From
the moment when this last symmetry was broken (∼ 10−10 sec) until the universe was about one
second old, neutrinos played the most significant role by mediating the neutron-proton transmu-
tations and therefore fixing their balance (neutron to proton ratio).
Already in a few seconds after the Big Bang nuclear reactions started to occur. The protons
378
? ? ?
? ? ? ?
? ? BIG BANG ? ?
0
32 single unified force
10 K 10−43 sec
28 gravitational force separated
10 K 10−35 sec
strong force separated
1015 K 10−10 sec
weak force separated
n+ν → p+e− , p+ ν̄ → n+e+
10
10 K 1 sec
p+n → 2 H+γ, 2
H+ 2 H → 4 He+γ
109 K 10 sec
pp–chain
7
10 K 500 sec
∼ ∼
2.9 K today 15 × 109 years
? ?
temperature time
Figure 19.11: Schematic “history” of the universe.
and neutrons combined very rapidly to form deuterium and then helium. During the very first
seconds there were too many very energetic photons around which destroyed these nuclei im-
mediately after their formation. Very soon, however, the continuing expansion of the universe
changed the conditions in favour of these newly born nuclei. The density decreased and the
photons could not destroy them that fast anymore.
During a short period of cosmic history, between about 10 and 500 seconds, the entire universe
behaved as a giant nuclear fusion reactor burning hydrogen. This burning took place via a chain
of nuclear reactions, which is called the pp-chain because the first reaction in this sequence is the
proton-proton collision leading to the formation of a deuteron. Nowadays, the same pp-chain is
the main source of energy in our sun and other stars.
But how do we know that the scenario was like this? In other words, how can we check the
Big–Bang theory? Is it possible to prove something which happened 15 billion years ago and in
such a short time? Yes, it is! The pp-chain fusion,
p+p → 2
H + e + + νe
pp-chain: e− +p + p → 2
H + νe
2 3
p+ H → He + γ
3 3 4
He + He → He + p + p
3 4 7
He + He → Be + γ
379
. &
e−+ 7 Be → 7 Li + νe p + 7 Be → 8 B + γ
p + 7 Li → 8 Be + γ 8
B → 8 Be∗ + e+ +νe
8 4 4
Be → He + He 8
Be∗ → 4 He + 4 He
is the key for such a proof.
ρ/ρp
6
1
10−2 helium
10 −4
deuterium
10−6
10−8
10−10
10−12 -
2 3 4
10 10 10 10 t (sec)
Figure 19.12: Mass fractions ρ (relative to hydrogen ρp ) of primordial deuterium and 4 He versus the
time elapsed since the Big Bang.
As soon as the nucleosynthesis started, the amount of deuterons, helium isotopes, and other
light nuclei started to increase. This is shown in Fig. 19.12 for 2 H and 4 He. The temperature and
the density, however, continued to decrease. After a few minutes the temperature dropped to
such a level that the fusion practically stopped because the kinetic energy of the nuclei was not
sufficient to overcome the electric repulsion between nuclei anymore. Therefore the abundances
of light elements in the cosmos were fixed (we call them the primordial abundances). Since then,
they practically remain unchanged, like a photograph of the past events, and astronomers can
measure them. Comparing the measurements with the predictions of the theory, we can check
whether our assumptions about the first seconds of the universe are correct or not.
Astronomy and the physics of microworld come to the same point from different directions.
The Big Bang theory is only one example of their common interest. Another example is related
to the mass of neutrino. When Pauli suggested this tiny particle to explain the nuclear β-decay,
it was considered as massless, like the photon. However, the experiments conducted recently,
indicate that neutrinos may have small non-zero masses of just a few eV.
In the world of elementary particles, this is extremely small mass, but it makes a huge dif-
ference in the cosmos. The universe continues to expand despite the fact that the gravitational
forces pull everything back to each other. The estimates show, that the visible mass of all galax-
ies is not sufficient to stop and reverse the expansion. The universe is filled with a tremendous
number of neutrinos. Even with few eV per neutrino, this amounts to a huge total mass of them,
which is invisible but could reverse the expansion.
Thus, the cooperation of astronomers and particle physicists has led to significant advances
in our understanding of the universe and its evolution. The quest goes on. A famous German
380
philosopher Friedrich Nietzsche once said that “The most incomprehensible thing about this
Universe is that it is comprehensible.”
381
Appendix A
GNU Free Documentation

License
Version 1.2, November 2002

Copyright ° c 2000,2001,2002 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
PREAMBLE
The purpose of this License is to make a manual, textbook, or other functional and useful doc-
ument “free” in the sense of freedom: to assure everyone the effective freedom to copy and
redistribute it, with or without modifying it, either commercially or non-commercially. Secon-
darily, this License preserves for the author and publisher a way to get credit for their work,
while not being considered responsible for modifications made by others.
This License is a kind of “copyleft”, which means that derivative works of the document must
themselves be free in the same sense. It complements the GNU General Public License, which
is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free
software needs free documentation: a free program should come with manuals providing the
same freedoms that the software does. But this License is not limited to software manuals; it
can be used for any textual work, regardless of subject matter or whether it is published as a
printed book. We recommend this License principally for works whose purpose is instruction or
reference.
APPLICABILITY AND DEFINITIONS

This License applies to any manual or other work, in any medium, that contains a notice placed
by the copyright holder saying it can be distributed under the terms of this License. Such a
notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under
the conditions stated herein. The “Document”, below, refers to any such manual or work. Any
member of the public is a licensee, and is addressed as “you”. You accept the license if you copy,
modify or distribute the work in a way requiring permission under copyright law.
382
A “Modified Version” of the Document means any work containing the Document or a portion
of it, either copied verbatim, or with modifications and/or translated into another language.
A “Secondary Section” is a named appendix or a front-matter section of the Document that
deals exclusively with the relationship of the publishers or authors of the Document to the Docu-
ment’s overall subject (or to related matters) and contains nothing that could fall directly within
that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary
Section may not explain any mathematics.) The relationship could be a matter of historical con-
nection with the subject or with related matters, or of legal, commercial, philosophical, ethical
or political position regarding them.
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being
those of Invariant Sections, in the notice that says that the Document is released under this
License. If a section does not fit the above definition of Secondary then it is not allowed to be
designated as Invariant. The Document may contain zero Invariant Sections. If the Document
does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or
Back-Cover Texts, in the notice that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented in a
format whose specification is available to the general public, that is suitable for revising the
document straightforwardly with generic text editors or (for images composed of pixels) generic
paint programs or (for drawings) some widely available drawing editor, and that is suitable for
input to text formatters or for automatic translation to a variety of formats suitable for input to
text formatters. A copy made in an otherwise Transparent file format whose markup, or absence
of markup, has been arranged to thwart or discourage subsequent modification by readers is not
Transparent. An image format is not Transparent if used for any substantial amount of text. A
copy that is not “Transparent” is called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without markup,
Texinfo input format, LATEX input format, SGML or XML using a publicly available DTD and
standard-conforming simple HTML, PostScript or PDF designed for human modification. Ex-
amples of transparent image formats include PNG, XCF and JPG. Opaque formats include
proprietary formats that can be read and edited only by proprietary word processors, SGML or
XML for which the DTD and/or processing tools are not generally available, and the machine-
generated HTML, PostScript or PDF produced by some word processors for output purposes
only.
The “Title Page” means, for a printed book, the title page itself, plus such following pages
as are needed to hold, legibly, the material this License requires to appear in the title page. For
works in formats which do not have any title page as such, “Title Page” means the text near the
most prominent appearance of the work’s title, preceding the beginning of the body of the text.
A section “Entitled XYZ” means a named subunit of the Document whose title either is
precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another
language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowl-
edgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a
section when you modify the Document means that it remains a section “Entitled XYZ” accord-
ing to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this
License applies to the Document. These Warranty Disclaimers are considered to be included by
reference in this License, but only as regards disclaiming warranties: any other implication that
these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
383
VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or non-commercially,
provided that this License, the copyright notices, and the license notice saying this License applies
to the Document are reproduced in all copies, and that you add no other conditions whatsoever
to those of this License. You may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However, you may accept compensation
in exchange for copies. If you distribute a large enough number of copies you must also follow
the conditions in section A.
You may also lend copies, under the same conditions stated above, and you may publicly
display copies.
COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of the
Document, numbering more than 100, and the Document’s license notice requires Cover Texts,
you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-
Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also
clearly and legibly identify you as the publisher of these copies. The front cover must present the
full title with all words of the title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the covers, as long as they preserve
the title of the Document and satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first
ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent
pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you
must either include a machine-readable Transparent copy along with each Opaque copy, or state
in or with each Opaque copy a computer-network location from which the general network-using
public has access to download using public-standard network protocols a complete Transparent
copy of the Document, free of added material. If you use the latter option, you must take
reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure
that this Transparent copy will remain thus accessible at the stated location until at least one year
after the last time you distribute an Opaque copy (directly or through your agents or retailers)
of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before
redistributing any large number of copies, to give them a chance to provide you with an updated
version of the Document.
MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions of sec-
tions A and A above, provided that you release the Modified Version under precisely this License,
with the Modified Version filling the role of the Document, thus licensing distribution and mod-
ification of the Modified Version to whoever possesses a copy of it. In addition, you must do
these things in the Modified Version:
1. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document,
and from those of previous versions (which should, if there were any, be listed in the History
384
section of the Document). You may use the same title as a previous version if the original
publisher of that version gives permission.
2. List on the Title Page, as authors, one or more persons or entities responsible for authorship
of the modifications in the Modified Version, together with at least five of the principal
authors of the Document (all of its principal authors, if it has fewer than five), unless they
release you from this requirement.
3. State on the Title page the name of the publisher of the Modified Version, as the publisher.
4. Preserve all the copyright notices of the Document.
5. Add an appropriate copyright notice for your modifications adjacent to the other copyright
notices.
6. Include, immediately after the copyright notices, a license notice giving the public permis-
sion to use the Modified Version under the terms of this License, in the form shown in the
Addendum below.
7. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts
given in the Document’s license notice.
8. Include an unaltered copy of this License.

9. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating
at least the title, year, new authors, and publisher of the Modified Version as given on the
Title Page. If there is no section Entitled “History” in the Document, create one stating
the title, year, authors, and publisher of the Document as given on its Title Page, then add
an item describing the Modified Version as stated in the previous sentence.
10. Preserve the network location, if any, given in the Document for public access to a Trans-
parent copy of the Document, and likewise the network locations given in the Document
for previous versions it was based on. These may be placed in the “History” section. You
may omit a network location for a work that was published at least four years before the
Document itself, or if the original publisher of the version it refers to gives permission.
11. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the
section, and preserve in the section all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
12. Preserve all the Invariant Sections of the Document, unaltered in their text and in their
titles. Section numbers or the equivalent are not considered part of the section titles.
13. Delete any section Entitled “Endorsements”. Such a section may not be included in the
Modified Version.
14. Do not re-title any existing section to be Entitled “Endorsements” or to conflict in title
with any Invariant Section.
15. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify as
Secondary Sections and contain no material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this, add their titles to the list of
385
Invariant Sections in the Modified Version’s license notice. These titles must be distinct from
any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but endorse-
ments of your Modified Version by various parties–for example, statements of peer review or that
the text has been approved by an organisation as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to
25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version.
Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through
arrangements made by) any one entity. If the Document already includes a cover text for the
same cover, previously added by you or by arrangement made by the same entity you are acting
on behalf of, you may not add another; but you may replace the old one, on explicit permission
from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to
use their names for publicity for or to assert or imply endorsement of any Modified Version.
COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the
terms defined in section A above for modified versions, provided that you include in the combi-
nation all of the Invariant Sections of all of the original documents, unmodified, and list them
all as Invariant Sections of your combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invari-
ant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the
same name but different contents, make the title of each such section unique by adding at the
end of it, in parentheses, the name of the original author or publisher of that section if known,
or else a unique number. Make the same adjustment to the section titles in the list of Invariant
Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled “History” in the various original
documents, forming one section Entitled “History”; likewise combine any sections Entitled “Ac-
knowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled
“Endorsements”.
COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this
License, and replace the individual copies of this License in the various documents with a single
copy that is included in the collection, provided that you follow the rules of this License for
verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually
under this License, provided you insert a copy of this License into the extracted document, and
follow this License in all other respects regarding verbatim copying of that document.
AGGREGATION WITH INDEPENDENT WORKS

A compilation of the Document or its derivatives with other separate and independent documents
or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the
386
copyright resulting from the compilation is not used to limit the legal rights of the compilation’s
users beyond what the individual works permit. When the Document is included an aggre-
gate, this License does not apply to the other works in the aggregate which are not themselves
derivative works of the Document.
If the Cover Text requirement of section A is applicable to these copies of the Document, then
if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may
be placed on covers that bracket the Document within the aggregate, or the electronic equivalent
of covers if the Document is in electronic form. Otherwise they must appear on printed covers
that bracket the whole aggregate.
TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of the Doc-
ument under the terms of section A. Replacing Invariant Sections with translations requires
special permission from their copyright holders, but you may include translations of some or
all Invariant Sections in addition to the original versions of these Invariant Sections. You may
include a translation of this License, and all the license notices in the Document, and any War-
ranty Disclaimers, provided that you also include the original English version of this License and
the original versions of those notices and disclaimers. In case of a disagreement between the
translation and the original version of this License or a notice or disclaimer, the original version
will prevail.
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”,
the requirement (section A) to Preserve its Title (section A) will typically require changing the
actual title.
TERMINATION
You may not copy, modify, sub-license, or distribute the Document except as expressly provided
for under this License. Any other attempt to copy, modify, sub-license or distribute the Document
is void, and will automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
FUTURE REVISIONS OF THIS LICENSE

The Free Software Foundation may publish new, revised versions of the GNU Free Documentation
License from time to time. Such new versions will be similar in spirit to the present version, but
may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies
that a particular numbered version of this License “or any later version” applies to it, you have the
option of following the terms and conditions either of that specified version or of any later version
that has been published (not as a draft) by the Free Software Foundation. If the Document does
not specify a version number of this License, you may choose any version ever published (not as
a draft) by the Free Software Foundation.
387
ADDENDUM: How to use this License for your documents
To use this License in a document you have written, include a copy of the License in the document
and put the following copyright and license notices just after the title page:
Copyright ° c YEAR YOUR NAME. Permission is granted to copy, distribute and/or

modify this document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the
license is included in the section entitled “GNU Free Documentation License”.
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with...Texts.”
line with this:
with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being
LIST, and with the Back-Cover Texts being LIST.
If you have Invariant Sections without Cover Texts, or some other combination of the three,
merge those two alternatives to suit the situation.
If your document contains nontrivial examples of program code, we recommend releasing
these examples in parallel under your choice of free software license, such as the GNU General
Public License, to permit their use in free software.
388

F Phy PDF

Uploaded by

Copyright:

Available Formats

F Phy PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

F Phy PDF

Uploaded by

Copyright:

Available Formats

The Free High School Science Texts: A Textbook for High

School Students Studying Physics.

2 Waves and Wavelike Motion 11

6 Rectilinear Motion 104

8 Work and Energy 140

Essay 1 : Energy 152

Essay 2 : Tiny, Violent Collisions 158

10 Newtonian Gravitation 176

Essay 3 : Pressure and Forces 188

12 Heat and Properties of Matter 190

15 Magnets and Electromagnetism 288

17 The Atom 335

18 Modern Physics 342

19 Inside atomic nucleus 345

A GNU Free Documentation License 382

1.1 PGCE Comments

1.2 ‘TO DO’ LIST

Table 1.1: SI Base Units

1.4 Unit Systems

1.4.1 SI Units (Système International d’Unités)

Prefix Symbol Exponent Prefix Symbol Exponent

Table 1.3: Unit Prefixes

1.4.2 The Other Systems of Units

1.5 The Importance of Units

1.7 How to Change Units— the “Multiply by 1” Technique

Question: Express 3800mm in metres.

1.8.1 What is a ‘sanity test’ ?

Category Quantity Minimum Maximum

Table 1.4: Everyday examples to help with sanity checks

|----| 102 Celsius |----| 375 Kelvin

1.10 Scientific Notation, Significant Figures and Rounding

Waves and Wavelike Motion

2.1 What are waves?

In physics we try to be as quantitative as possible. If we look very carefully we notice that

2.1.1 Characteristics of Waves : Amplitude

2.1.2 Characteristics of Waves : Wavelength

2.1.3 Characteristics of Waves : Period

2.1.4 Characteristics of Waves : Frequency

f : frequency (Hz or s−1 )

2.1.5 Characteristics of Waves : Speed

2.2 Two Types of Waves

 ¼ ª  ¿ ´ ¢{ ¡ z ° ¬ È » [ Ê öÔî è ìêù ò ýcÙ óôñ ] Ýj Ú*ÞÛ P û Õà D X u  i $ F  & S # 

2.3 Properties of Waves

2.3.1 Properties of Waves : Reflection

Phase shift of reflected wave

2.3.3 Properties of Waves : Interference

2.3.4 Properties of Waves : Standing Waves

Reflection from a fixed end

Reflection from an open end

Case 1 Case 2 Case 3

fB : beat frequency (Hz or s−1 )

Huygen’s principle is a method of analysis applied to problems of wave propagation. It

Wavefronts Moving Through an Opening

2.3.7 Properties of Waves : Dispersion

2.4 Practical Applications of Waves: Sound Waves

2.4.2 Mach Cone

• It shows the structure as well as some aspects of the function of organs.

• Equipment is widely available and comparatively flexible; examinations can be performed

• Much cheaper than many other medical imaging technology.

¼ ª ¿ ´ ¢{ ¡ z ° ¬ È » [ Ê öÔî è ìêù ò ýcÙ óôñ ] Ýj Ú*ÞÛ P û Õà D X u i $ F & S #