Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 129 views

    Isgec Heavy Engineering Limited: Pipe Conveyor System To Transport Coal From WCL Coal Mines To Koradi & Khaperkheda Tps

    Uploaded by

    Muhammad Hasan
    This document provides load calculations for the side runners of a junction tower that is part of a pipe conveyor system transporting coal between mines and power plants. It calculates the dead load per meter of siding as 0.09 kN/m based on the weight and width of the side sheeting. It also calculates the total wind load per meter as 2.321 kN/m based on the wind load on cladding, maximum pressure coefficient, and width. The design will be performed in STAAD and deflection will be checked to ensure it is below the span divided by 150.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Isgec Heavy Engineering Limited: Pipe Conveyor System To Transport Coal From WCL Coal Mines To Koradi & Khaperkheda Tps

    Uploaded by

    Muhammad Hasan
    129 views2 pages
    This document provides load calculations for the side runners of a junction tower that is part of a pipe conveyor system transporting coal between mines and power plants. It calculates the dead load per meter of siding as 0.09 kN/m based on the weight and width of the side sheeting. It also calculates the total wind load per meter as 2.321 kN/m based on the wind load on cladding, maximum pressure coefficient, and width. The design will be performed in STAAD and deflection will be checked to ensure it is below the span divided by 150.

    Original Description:

    cladding member design

    Original Title

    Side Runner Design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides load calculations for the side runners of a junction tower that is part of a pipe conveyor system transporting coal between mines and power plants. It calculates the dead load per meter of siding as 0.09 kN/m based on the weight and width of the side sheeting. It also calculates the total wind load per meter as 2.321 kN/m based on the wind load on cladding, maximum pressure coefficient, and width. The design will be performed in STAAD and deflection will be checked to ensure it is below the span divided by 150.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    129 views2 pages

    Isgec Heavy Engineering Limited: Pipe Conveyor System To Transport Coal From WCL Coal Mines To Koradi & Khaperkheda Tps

    Uploaded by

    Muhammad Hasan
    This document provides load calculations for the side runners of a junction tower that is part of a pipe conveyor system transporting coal between mines and power plants. It calculates the dead load per meter of siding as 0.09 kN/m based on the weight and width of the side sheeting. It also calculates the total wind load per meter as 2.321 kN/m based on the wind load on cladding, maximum pressure coefficient, and width. The design will be performed in STAAD and deflection will be checked to ensure it is below the span divided by 150.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 2

    ISGEC HEAVY ENGINEERING LIMITED

    PROJECT TITLE
    PIPE CONVEYOR SYSTEM TO TRANSPORT COAL FROM WCL COAL MINES
    TO KORADI & KHAPERKHEDA TPS
    DOCUMENT NO.
    REV
    ES0154-75440100-CAL-0141
    ANALYSIS & DESIGN OF JUNCTION TOWER NTP 02 0

    8 Load Calculation for side runners

    Dead Load:

    Weight of side sheeting = 0.06 kN/m2

    Max width on left side of purlin = 1.5 m

    Max width on right side of purlin = 1.5 m

    Max. Contributory width

    = (1.5+1.5) / 2 = 1.5 m

    Dead load of sheeting per metre

    = 0.06*1.5 = 0.09 kN/m


    Total Dead Load per metre = 0.09 kN/m

    Wind load: (WL)

    Wind load on cladding = 1.190 kN/m2

    Maximum pressure coefficient (0.8+0.5) = 1.300

    \Total wind load


    = 1.19*1.3*1.5 = 2.321 kN/m

    Note:

    Design is performed in STAAD as per IS801 & Deflection is checked in STAAD for Span/150
    ISGEC HEAVY ENGINEERING LIMITED
    PROJECT TITLE
    PIPE CONVEYOR SYSTEM TO TRANSPORT COAL FROM WCL COAL MINES
    TO KORADI & KHAPERKHEDA TPS
    DOCUMENT NO.
    REV
    ES0154-75440100-CAL-0141
    ANALYSIS & DESIGN OF JUNCTION TOWER NTP 02 0

    You might also like