Altistart 48 - ATS48C21Q

Product data sheet ATS48C21Q
Characteristics soft starter for asynchronous motor - ATS48 - 195

A - 230..415 V - 45..160 KW
Main
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Range of product Altistart 48
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Heavy duty industry and pumps
Device short name ATS48
[Us] rated supply voltage 230...415 V (- 15...10 %)
Motor power kW 55 kW at 230 V (connection in the motor supply line) for standard applications
90 kW at 230 V (connection to the motor delta terminals) for severe applications
90 kW at 400 V (connection in the motor supply line) for severe applications
110 kW at 230 V (connection to the motor delta terminals) for standard applications
110 kW at 400 V (connection in the motor supply line) for standard applications
132 kW at 400 V (connection to the motor delta terminals) for severe applications
160 kW at 400 V (connection to the motor delta terminals) for standard applications
45 kW at 230 V (connection in the motor supply line) for severe applications
Power dissipation in W For severe applications 468 W
For standard applications 580 W
Utilisation category AC-53A
Type of start Start with torque control (current limited to 5 In)
IcL starter rating 210 A (connection in the motor supply line) for severe applications
364 A (connection to the motor delta terminals) for severe applications
364 A (connection to the motor delta terminals) for standard applications
210 A (connection in the motor supply line) for standard applications
IP degree of protection IP00
Complementary
Assembly style With heat sink
Function available External bypass (optional)
Supply voltage limits 195...456 V
Supply frequency 50...60 Hz (- 5...5 %)
Network frequency 47.5...63 Hz
Device connection In the motor supply line
To the motor delta terminals
Factory setting current 195 A
[Uc] control circuit voltage 220 - 15 % to 415 + 10 %, 50/60 Hz
Control circuit consumption 50 W
Nov 22, 2018

1
Discrete output number 2
Discrete output type (LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Output absolute accuracy precision +/- 5 %
Minimum switching current Relay outputs 10 mA at 6 V DC
Maximum switching current Logic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 ms
Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms
Discrete input number 5
Discrete input type PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Discrete input voltage 24 V (<= 30 V)
Discrete input logic Positive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA
Supply inrush current Adjustable 0.4...1.3 Icl
Analogue output type (AO) current output 0-20 mA or 4-20 mA <= 500 Ohm
Communication port protocol Modbus
Connector type 1 RJ45
Communication data link Serial
Physical interface RS485 multidrop
Transmission rate 4800, 9600 or 19200 bps
Installed device 31
Protection type Phase failure (line)
Thermal protection (motor)
Thermal protection (starter)
Marking CE
Type of cooling Forced convection
Operating position Vertical +/- 10 degree
Height 380 mm
Width 320 mm
Depth 265 mm
Product weight 18.2 kg
Power range 30...50 kW at 200...240 V 3 phases
55...100 kW at 380...440 V 3 phases
55...100 kW at 200...240 V 3 phases
110...220 kW at 380...440 V 3 phases
110...220 kW at 200...240 V 3 phases
Motor starter type Soft starter
Environment
Electromagnetic compatibility Conducted and radiated emissions conforming to IEC 60947-4-2 level A
Damped oscillating waves conforming to IEC 61000-4-12 level 3
Electrostatic discharge conforming to IEC 61000-4-2 level 3
Immunity to electrical transients conforming to IEC 61000-4-4 level 4
Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3
Voltage/Current impulse conforming to IEC 61000-4-5 level 3
Standards EN/IEC 60947-4-2
Product certifications CCC
CSA
C-Tick
DNV
GOST
NOM 117
SEPRO
TCF
UL
Vibration resistance 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
2
Noise level 54 dB
Pollution degree Level 3 conforming to IEC 60664-1
Relative humidity 0...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation 40...60 °C with current derating of 2 % per °C
-10...40 °C without derating
Ambient air temperature for storage -25...70 °C
Operating altitude <= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m
Contractual warranty
Warranty period 18 months
3
Dimensions Drawings
Dimensions
(1) Right View

(2) Front View
4
Mounting and Clearance
Clearance

Altistart 48 - ATS48C21Q

Uploaded by

Copyright:

Available Formats

Altistart 48 - ATS48C21Q

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Altistart 48 - ATS48C21Q

Uploaded by

Copyright:

Available Formats

Product data sheet ATS48C21Q

Characteristics soft starter for asynchronous motor - ATS48 - 195

Nov 22, 2018

(1) Right View

You might also like