Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    5 Way Rotary Tone Selector

    Uploaded by

    Chris Efstathiou
    This document describes the wiring configuration for a 2 humbucker guitar setup with a PRS 5-way rotary pickup selector switch. The bridge and neck humbuckers each have 4 conductor wiring that connects to the 5-way switch. The switch has 5 positions that allow the player to select different pickup combinations ranging from the bridge humbucker alone to the neck humbucker alone or combinations of the inside and outside coils of both pickups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    5 Way Rotary Tone Selector

    Uploaded by

    Chris Efstathiou
    2K views1 page
    This document describes the wiring configuration for a 2 humbucker guitar setup with a PRS 5-way rotary pickup selector switch. The bridge and neck humbuckers each have 4 conductor wiring that connects to the 5-way switch. The switch has 5 positions that allow the player to select different pickup combinations ranging from the bridge humbucker alone to the neck humbucker alone or combinations of the inside and outside coils of both pickups.

    Original Description:

    5 Way Rotary Tone Selector

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the wiring configuration for a 2 humbucker guitar setup with a PRS 5-way rotary pickup selector switch. The bridge and neck humbuckers each have 4 conductor wiring that connects to the 5-way switch. The switch has 5 positions that allow the player to select different pickup combinations ranging from the bridge humbucker alone to the neck humbucker alone or combinations of the inside and outside coils of both pickups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views1 page

    5 Way Rotary Tone Selector

    Uploaded by

    Chris Efstathiou
    This document describes the wiring configuration for a 2 humbucker guitar setup with a PRS 5-way rotary pickup selector switch. The bridge and neck humbuckers each have 4 conductor wiring that connects to the 5-way switch. The switch has 5 positions that allow the player to select different pickup combinations ranging from the bridge humbucker alone to the neck humbucker alone or combinations of the inside and outside coils of both pickups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    2 Humbuckers with 4 Conductor wired to original style PRS* 5 Way Rotary Switch

    Solder joint PRS* 5 Way Rotary Switch


    Black
    Key Hot output
    Ground connection.
    Usually soldered to rear of volume pot

    Green
    *
    Current style PRS 5 Way- &
    White
    Bridge Pickup Neck Pickup 5 Way Switch Positions-
    Red Green & White Black Black Green & White Red

    1. Bridge Humbucker

    To Volume 2. Outside coils of both pickups in parallel

    Ground Wire 3. Inside coils of both pickups in series


    4. Inside coils of both pickups in parallel
    5. Neck Humbucker

    Green
    Bare & Black
    White
    Red

    Red
    Bare

    NB - Bridge Pickup magnet must be reversed for correct


    operation with this type of switching Bare Knuckle
    Pickups
    Neck Bridge
    Pickup Pickup
    PRS is a registered trademark of Paul Reed Smith and is not affiliated in any way with Bare Knuckle Pickups Ltd
    Bare Knuckle Pickups C 2010 www.bareknucklepickups.co.uk

    You might also like