Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
76 views

Prog Op 1-3 18.08.2018 17:57: CMM Inspection Sheet

This document is a quality assurance inspection sheet containing measurements of various parts against specifications. It lists 164 line items measuring dimensions like distances, diameters, radii, and angles. For each item, it shows the nominal dimension, tolerance, actual measurement taken, and deviation from nominal. Most measurements fall within tolerance, indicated by symbols like ****** or -----.

Uploaded by

Nomo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
76 views

Prog Op 1-3 18.08.2018 17:57: CMM Inspection Sheet

This document is a quality assurance inspection sheet containing measurements of various parts against specifications. It lists 164 line items measuring dimensions like distances, diameters, radii, and angles. For each item, it shows the nominal dimension, tolerance, actual measurement taken, and deviation from nominal. Most measurements fall within tolerance, indicated by symbols like ****** or -----.

Uploaded by

Nomo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PT.

SINAR AGUNG SELALU SUKSES


QUALITY ASSURANCE DEPT. Inspector, Leader,

CMM INSPECTION SHEET

Part-No. Part name Customer 18.08.2018 17:57


prog op 1-3

L.No Mem. Job Des. Nominal Tolerance Actual Dev. Oversize


No
123 2 Distance 8.000 0.200 7.973 -0.027
Distance Z -0.200 ----**-----
125 3 Distance 51.500 0.500 51.398 -0.102
Distance Z -0.500 ----**-----
127 4 Distance 62.300 0.300 62.129 -0.171
Distance Z -0.300 --****-----
129 5 Distance 11.000 0.200 10.881 -0.119
Distance Z -0.200 --****-----
131 6 Distance 15.000 0.200 15.010 0.010
Distance Z -0.200 -----*-----
132 1 Cylinder 70.000 0.046 70.045 0.045
Diameter 0.000 -----******
134 7 Radius 65 From Dia 130 65.000 0.250 65.073 0.073
Distance Y -0.250 -----**----
136 8 Radius 92.5 From Dia 185 92.500 0.250 92.584 0.084
Distance Y -0.250 -----***---
137 2 Cylinder 190.000 0.200 190.149 0.149
Diameter 0.000 -----***---
138 8 Circle 204.000 0.200 204.042 0.042
Diameter -0.200 -----**----
139 9 Circle 218.000 0.200 217.926 -0.074
Diameter -0.200 ---***-----
140 10 Circle 204.000 0.200 203.905 -0.095
Diameter -0.200 ---***-----
141 10 Circle X 0.000 0.200 0.034 0.068
Concentricity Y 0.000 -0.004 ***---
142 1 Plane 0.050 0.009
Perpendicularity **----
143 2 Plane 0.050 0.020
Perpendicularity ***---
144 2 Cylinder 0.050 0.119 0.069
Circularity |--->>
146 2 Cylinder 0.050 0.031
Perpendicularity ****--
147 2 Cylinder 0.050 0.021
Perpendicularity ***---

- Page 1 -
Drawing no. Auditor Part-No. Series/Nominal
Part name Customer 18.08.2018 17:57
prog op 1-3
L.No Mem. Job Des. Nominal Tolerance Actual Dev. Oversize
No
148 2 Cylinder 0.100 0.096
Coaxiality ******
149 8 Circle X 0.000 0.200 -0.003 0.015
Concentricity Y 0.000 -0.007 *-----
150 9 Circle X 0.000 0.200 0.035 0.085
Concentricity Y 0.000 -0.024 ***---
151 11 Circle 2.000 0.200 1.951 -0.049
Radius -0.200 ----**-----
152 12 Circle 2.000 0.200 2.156 0.156
Radius -0.200 -----*****-
153 13 Circle 2.000 0.200 2.139 0.139
Radius -0.200 -----****--
154 14 Circle 5.000 0.500 5.001 0.001
Radius -0.500 -----*-----
155 15 Circle 5.000 0.500 5.306 0.306
Radius -0.500 -----****--
156 16 Circle 5.000 0.500 5.124 0.124
Radius -0.500 -----**----
158 17 PCD 100 100.000 0.300 99.978 -0.022
Diameter -0.300 -----*-----
160 9 distance 158.000 0.500 157.989 -0.011
Distance X -0.500 -----*-----
161 4 Circle Rxy 50.000 0.100 49.996 0.050
Position PH 40:00:00 40:01:42 ****--
162 5 Circle Rxy 50.000 0.100 49.985 0.056
Position PH 140:00:00 139:58:20 ****--
163 6 Circle Rxy 50.000 0.100 50.000 0.018
Position PH -140:00:00 -140:00:36 **----
164 7 Circle Rxy 50.000 0.100 49.976 0.051
Position PH -40:00:00 -40:00:32 ****--
168 1 Angle 80:00:00 0:30:00 80:02:14 0:02:14
XY-angle -0:30:00 -----*-----

- Page 2 -

You might also like