ROTHOBLAAS - Air-Tightness-Smartbook

S!
"#$
AIR TIGHTNESS
1
ACRYLIC TAPES SELF-EXPANDING PROFILES

Products with solvent-free polymeric mixes suitable Product obtained from polyurethane foam.
for regular surfaces such as membranes, wood Used to fill in irregular cracks; high elasticity
and OSB. High thermal stability. over time.
FLEXI BAND page 30 FRONT BAND page 36 KOMPRI BAND page 42 FRAME BAND page 43
EASY BAND page 31 FRONT BAND UV 210
page 37
FROST BAND page 32
DOUBLE BAND page 33
SEAL BAND page 38 NAIL POINT SEALANTS
SEAL SQUARE page 39
SUN BAND page 34 Butyl tapes and tapes made of closed-cell
MAXI BAND page 40 polyethylene foam. They guarantee water and
ALU BAND page 35
air tightness even if drilled or trimmed.
NAIL PLASTER page 53 GIPS BAND page 53

BUTYL SEALANTS
GEMINI page 53 NAIL BAND page 53
Made with refined bitumen and characterised
by high elasticity and ability to adhere to
porous or irregular surfaces. CHEMICAL SEALANTS, GLUES AND PRIMERS
BLACK BAND page 45 BUTYL BAND page 49 For accurate connections or connections
between different materials. High chemical
SUPRA BAND page 46 ROND BAND page 49 compatibility with the most common surfaces
PROTECT page 48 BUTYL GLUE page 49 used in the construction sector.
GROUND BAND page 48 HERMETIC FOAM page 47 SEALING FOAM page 52
MEMBRANE GLUE page 52 PRIMER page 54
SUPERB GLUE page 52 BYTUM LIQUID page 54
NWF THAT CAN BE PLASTERED OVER
UNIVERSAL GEL page 52
Products with a NWF (Non-Woven Fabric)
support that can be plastered over,
usually made of polypropylene. Guarantee SLEEVES AND GASKETS
good adhesion to plaster and plasterboard.
Accessories for the sealing of electrical
PLASTER BAND page 41 BORDER BAND page 44 systems, piping, or pass-through elements
with circular cross-section.
PROFILES MANICA SINGLE page 51 MANICA POST page 51

EPDM plastic and non-plastic materials, with MANICA MULTI page 51 TUBE STOPPER page 54
high thermal and chemical stability, durability MANICA PLASTER page 51
guaranteed over time long with good
resistance to UV rays.
CONSTRUCTION KENAF BAND page 50 !at # $

%&ŋ (...?
SEALING page 50
ALPHA page 54
CONNECT BAND page 48
TIE BEAM STRIPE page 50
2
glossary
Condensation Let's imagine air as a container: at high temperatures its volume increases,
thus absorbing more water vapour. When temperatures cool down, on the
other hand, air reduces its volume and the ability to absorb vapour; once the
saturation point is reached, the excess vapour is eliminated in the form of
condensation (water droplets).
20° 17° 14° )*+,о ./t

Air and The continuous air-tight layer prevents
wind tightness internal air from penetrating the thermal
shell; the wind-tight layer blocks all external
air flows towards the shell, also ensuring
waterproofing. They both serve to prevent
uncontrolled condensation phenomena.
How is a tape made?
Support Film to which the adhesive mix and the other components area applied.
Primer Layer that serves as a binder between the support and the adhesive.
Release liner Removable anti-adhesive layer that makes it possible to unwind the tape.
It can be supplied split up into multiple sections in order to facilitate its laying.
Reinforcement Polymeric mesh that provides strength and stiffness to the final product.
Core Internal Core. Cardboard or plastic cylinder around which the tape is wound.
Fingerlift Part of the liner that sticks out in order to simplify its removal.
:;аe =>r
6‫ה‬89
:/(ABC
6‫ה‬89
@: 345 fiŋ5=?
01ort
3
CHOOSE A SEALING PRODUCT OR TAPE
to !Eh F G 0HIe Jll L be Np=O?

Examine the nature of the surfaces and their shape (smooth or rough). Very irregular
surfaces require more glue in order to activate the adhesion process.
àbt: Zc5atde, =et, fghi, jk?

"Water, sudden temperature changes and exposure to UV rays
may shorten the service life of the products. Some products can
remain functional despite a humid support surface.
[ I know Q ]^s L Jll be 0b_SO to ?

It is necessary to analyse the mechanical stress to which the product will be subjected once it is
working. During the application phase, it is important to reduce tension and elongation down to a
minimum.
]lmn or :opqbʦ to be @c=O Js?

Prior to application, check to see whether any technical
requirements must be complied with.
Does Q 3RuS T9 U VpiX YZ?

It is mandatory to comply with the final date, if indicated, within which the
product has to be applied. Otherwise, contact the manufacturer or carry out a
few practical tests.
HOW TO STORE A TAPE OR SEALING PRODUCT
Product performance is guaranteed only if the Keep the tapes

expiry date or additional indications provided in their original packing to
by the manufacturer are complied with. avoid any direct exposure
to sunlight and prevent any
For storage purposes, it is generally contact with dust and dirt.
appropriate to satisfy specific conditions:
• temperature included between 5 and 25 °C * Tapes and profiles must be
• relative humidity less than 65% cut and not torn, in order
• avoid extreme environmental conditions to prevent any fraying or
and direct exposure to heat sources. laceration.
* If stored at lower temperature, the products must be brought to the ideal temperature prior to being used.
Certain products may no longer be usable once they have frozen.
4
utilisation table
A PRODUCT FOR EACH TYPE OF CONSTRUCTION NODE
wоt Bl / UV 210
}~ Bl / So#
Dyze Bl
wxt Bl
uv Bl
tVi Bl
Sun Bl
|u Bl
page 36/37
page 38/39
page 30
page 31
page 32
page 33
page 34
page 35
FOUNDATION  WALL
WALL  WALL
SLAB  WALL
BEAM  WALL
GIRDER  BEAM
SEALING
NAIL POINT
DOOR/WALL FRAME  WALL
SKYLIGHT
SEALING
MEMBRANES
SEALING
BY COMPRESSION
SEALING
THAT CAN BE PLASTERED
SEALING OF TECHNICAL
INSTALLATIONS AND PASSAGES
CHIMNEYS AND VENTS

Mi Bl
page 40
P]5 Bl
page 41
K3i Bl
page 42
wè Bl
page 43
Borr Bl
page 44
B Bl
page 45
Su3a Bl
page 46
E `
page 47
E `
page 48
PZS
page 48
Gd Bl
page 48
5
6
utilisation table
A PRODUCT FOR EACH TYPE OF CONSTRUCTION NODE
CouSn }~
T Bm Se
MUEa P]5
MUEa ŋ;
MUEa Mul,
Kb Bl
B Bl
Rоd Bl
B Ge
page 49
page 49
page 49
page 50
page 50
page 50
page 51
page 51
page 51
FOUNDATION  WALL
WALL  WALL
SLAB  WALL
BEAM  WALL
GIRDER  BEAM
SEALING
NAIL POINT
DOOR/WALL FRAME  WALL
SKYLIGHT
SEALING
MEMBRANES
SEALING
BY COMPRESSION
SEALING
THAT CAN BE PLASTERED
SEALING OF TECHNICAL
INSTALLATIONS AND PASSAGES
CHIMNEYS AND VENTS

MUEa Pxt
page 51
MqUe Ge
page 52
Su‫ פ‬Ge
page 52
U9~ G
page 52
}~ `
page 52
Nl Bl
page 53
Nl P]5
page 53
Gq/i
page 53
Gs Bl
page 53
Tube S‫פ‬r
page 54
| a
page 54
B¡¢ L£u¤
page 54
7
8
utilisation table
page 30
tVi Bl
page 31
uv Bl
POLYPROPYLENE SURFACEi.e., TRASPIR150
page 32
wxt Bl
POLYETHYLENE SURFACEi.e., BARRIER40
ALUMINIZED SURFACE i.e., BARRIER200
page 33
Dyze Bl
POLYAMIDE SURFACE k.e. CLIMA CONTROL
SUPPORT WITH APPLIED COATING i.e., ARIES
page 34
Sun Bl
SUPPORT MADE OF BITUMEN AND POLYPROPYLENE
i.e.,BYTUM750
A TAPE FOR EACH TYPE OF MATERIAL
WOOD
ROUGH OSB
page 35
|u Bl
ROUGH OSB, PREFERABLY WITH PRIMER

SMOOTH OSB
PLASTER, CONCRETE AND BRICKS
METAL
page 36/37
wоt Bl UV 210
wоt Bl +
WOOD FIBRE
MINERAL WOOL
FIBREGLASS
POLYSTYRENE
page 38/39
}~ So#
UNTREATED PVC, PLEXIGLAS OR PLASTIC

PLASTERBOARD AND FIBREBOARD
page 40
}~ Bl + Mi Bl
page 41
P]5 Bl
POLYSTYRENE
FIBREGLASS
page 42
MINERAL WOOL
WOOD FIBRE
K3i Bl
METAL
page 43
SMOOTH OSB
wè Bl

ROUGH OSB
page 44
WOOD

Borr Bl
i.e.,BYTUM750
page 45

B Bl

page 46

MEMBRANES
Su3a Bl
page 47
page 48
application allowed
PZS
page 48
E `
application possible with the
adoption of special measures
application not recommended
9
Co¥¦t Bl
CONSTRUCTION MATERIALS
10
utilisation table
page 48
Gd Bl
page 49
B Bl
page 49
Rоd Bl
page 49
B Ge
page 51
MUEa ŋ;
i.e.,BYTUM750
A TAPE FOR EACH TYPE OF MATERIAL
WOOD
ROUGH OSB
page 51
MUEa Mul,

SMOOTH OSB
page 51
MUEa P]5
METAL
WOOD FIBRE
MINERAL WOOL
FIBREGLASS
page 51
MUEa Pxt
POLYSTYRENE
page 52
MqUe Ge
page 52
Su‫ פ‬Ge
POLYSTYRENE
FIBREGLASS
page 52
MINERAL WOOL
U9~ G
WOOD FIBRE
METAL
page 52
SMOOTH OSB
}~ `
ROUGH OSB
WOOD
page 53

Nl Bl
i.e.,BYTUM750
page 53

Nl P]5

page 53
Gq/i

MEMBRANES
page 53
Gs Bl
application allowed
page 54
P§Br
page 54
application not recommended
application possible with the
adoption of special measures
B¡¢ L£u¤
11
CONSTRUCTION MATERIALS
12
application
APPLICATION SETTINGS
¨© 13 ¨© 14
Roof and wall in XLAM (Cross Laminated Structure in XLAM (Cross Laminated Timber)
Timber). with ventilated wall.
¨© 16 ¨© 18
Raising on concrete and masonry wall. Frame wall with window (internal view).
¨© 20 ¨© 22
Frame roof on masonry wall. Frame wall and roof.
¨© 24 ¨© 26
Roof with micro ventilation. Blockhaus wall and roof with micro ventilation.
13
application
ROOF AND WALL IN XLAM (Cross Laminated Timber)

BUTYL GLUE page 49
NAIL BAND page 53
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
DOUBLE BAND
SUN BAND page 34 page 33
SUPRA BAND
page 46
KOMPRI BAND page 42

FRAME BAND page 43
NAIL BAND page 53

NAIL PLASTER page 53
GEMINI page 53
PLASTER BAND BUTYL GLUE page 49
page 41
BORDER BAND
page 44
MANICA PLASTER
page 51
KOMPRI BAND page 42
FRAME BAND page 43
14
application
STRUCTURE IN XLAM (Cross Laminated Timber) WITH VENTILATED WALL
BUTYL GLUE page 49

NAIL BAND page 53
GEMINI page 53
FLEXI BAND page 30
EASY BAND page 31
FROST BAND page 32
SUN BAND page 34
FRONT BAND page 36
KOMPRI BAND page 42

FRAME BAND page 43
GROUND BAND page 48
BYTUM LIQUID page 54

15
MAXI BAND page 40

ªξ ]§p
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
BUTYL BAND page 49

BUTYL GLUE page 49
CONSTRUCTION SEALING page 50
ALPHA page 54

16
application
RAISING ON CONCRETE AND MASONRY WALL
SEAL BAND page 38
KOMPRI BAND page 42

HERMETIC FOAM page 47
SEALING FOAM page 52
SEAL SQUARE page 39
PLASTER BAND
page 41
PROTECT
page 48
KOMPRI BAND page 42 CONNECT BAND

FRAME BAND page 43 page 48
~k¬,9, B Ge

17

(~k¬,9
K3i Bl)
KOMPRI BAND page 42

SEAL BAND page 38
UNIVERSAL GEL
page 52
NAIL BAND page 53 NAIL BAND page 53

NAIL PLASTER page 53 NAIL PLASTER page 53
GEMINI page 53 GEMINI page 53
BUTYL GLUE page 49 GIPS BAND page 53
¬® ./t ¯~Uʦ
18
application
FRAME WALL WITH WINDOW (INTERNAL VIEW)
BUTYL BAND page 49

ROND BAND page 49
SEAL SQUARE page 39
PLASTER BAND page 41

FRAME BAND page 43
PROTECT page 48 NAIL BAND page 53
GEMINI page 53
BUTYL GLUE page 49
PROTECT page 48
PRIMER page 54
(to be Np=O r Q °‫ פ‬/
±¯ G Vqy .² 0HI³)
19
FRAME BAND page 43

ALU BAND page 35

SEAL BAND page 38
BUTYL GLUE page 49

GIPS BAND page 53
UNIVERSAL GEL page 52
MANICA MULTI
page 51
MANICA SINGLE
page 51
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
SEAL BAND page 38
(or ´µb °piŋ Js
Su3a Bl)
20
application
FRAME ROOF ON MASONRY WALL
DOUBLE BAND page 33

SUPRA BAND page 46
MEMBRANE GLUE page 52

SUPERB GLUE page 52
(or °piŋ Js
Su3a Bl) TUBE STOPPER page 54
MANICA SINGLE page 51

MANICA MULTI page 51
MANICA PLASTER page 51
TIE BEAM STRIPE page 50

GIPS BAND page 53
PROTECT page 48
(~k¬,9 B Ge)
21
KOMPRI BAND page 42

FRAME BAND page 43
BORDER BAND page 44

PROTECT page 48
SUPRA BAND page 46
(²e B¡¢ L£u¤
а 345)
ALU BAND page 35
SEAL BAND page 38
BLACK BAND page 45

(~k¬,9, ²e
Q ¶·9s)
22
application
FRAME WALL AND ROOF
NAIL BAND page 53

GEMINI page 53
or ²e
B Ge

FLEXI BAND page 30 MANICA PLASTER page 51
EASY BAND page 31
FROST BAND page 32
SUN BAND page 34
BUTYL GLUE page 49

NAIL BAND page 53
GEMINI page 53 FRONT BAND
page 36
FRONT BAND UV 210
page 37
DOUBLE BAND page 33

SUPRA BAND page 46
23
KOMPRI BAND page 42

FRAME BAND page 43
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
SUN BAND page 34
BLACK BAND
page 45
KOMPRI BAND page 42

ROND BAND page 49
FLEXI BAND page 30 TIE BEAM STRIPE page 50

EASY BAND page 31 CONSTRUCTION SEALING page 50
FROST BAND page 32 BUTYL BAND page 49
ROND BAND page 49
KOMPRI BAND page 42

FRAME BAND page 43
24
application
ROOF WITH MICRO VENTILATION
FLEXI BAND page 30

EASY BAND page 31
SUN BAND page 34
(( °piŋ ¸¹ at ºw
Zc5atd³, ²e
wxt Bl)
ALPHA page 54 KOMPRI BAND page 42

25
MANICA POST page 51
DOUBLE BAND page 33
MANICA SINGLE
page 51
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
BUTYL GLUE page 49

NAIL BAND page 53
GEMINI page 53

MANICA PLASTER page 51
TUBE STOPPER page 54
26
application
BLOCKHAUS WALL AND ROOF WITH MICRO VENTILATION
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
SUN BAND page 34
¯~Uʦ
¬® ./t
ALPHA page 54
FLEXI BAND page 30 KOMPRI BAND page 42

EASY BAND page 31 HERMETIC FOAM page 47
FROST BAND page 32
SUN BAND page 34
27
FLEXI BAND page 30

EASY BAND page 31
FROST BAND page 32
/0,ŋ »¼
( BºT²
KENAF BAND page 50
BUTYL GLUE page 49
NAIL BAND page 53
GIPS BAND page 53
BUTYL BAND page 49

ROND BAND page 49
28
instructions
STEP BY STEP: SEALING OF ONE WINDOW FROM ROOF*
Cutting of membrane for skylight and opening Positioning protection under last overlap.
of turn-ups.
Folding of turn-ups and frame protection. Protection of corners with LPDE elements.
Taping of all joints. Positioning of expanding tape on joint.

29
instructions
STEP BY STEP: SEALING OF A CHIMNEY*
3!
Cutting of membrane and making of flue. Positioning of class A1 material in adherence.
10 !
10 !
Sealing of class A1 material on membrane. Positioning of frame min. 10 cm

from flue.
Collar for connection to box and coating for air Complete taping of overlaps.
tightness.
*For more in-depth information, ask for a copy of the SECUROTHO Laying Manual.
30
product availability
FLEXI BAND pre-cut liner

different versions
description waterproof
UNIVERSAL SINGLE-SIDED ACRYLIC TAPE

½
Sat¾+ y: solvent-free (< 0.02% VOC)
1. .¿;> fiÀ
2. .IXZ Áue ½
2. .¿;> BÂ room temperature
4. .IXZ Áue for application
5. 8=@>-43Ã¬Zd ¨‫פ‬r -10 °C

application
1
2 functionality on damp support
3
4 (see page 3)
5
½
Ä»SÅe о Æ 0HI³ ideal application on:
• Its special adhesive formula ensures perfect and high

adhesion even to wet or very porous surfaces, under all
environmental conditions.
• Versions with liner equipped with Fingerlift.
• Resistance to UV rays guaranteed for 4 months.
codes and dimensions
liner width length

CODE pce/
[mm] [mm] [m]
D52114 - 60 25 10
D52116 - 100 25 6 for application compatibility to
the various construction nodes
D52117 75 / 75 150 25 4 and supports, please refer to
the tables provided on pages
D52118 50 / 50 100 25 6 4 and 8.
31
EASY BAND pre-cut liner

different versions
UNIVERSAL SINGLE-SIDED TAPE

½
VAllbt solvent-free (< 0.02% VOC)
o~Ç/3Ee +,o
½
room temperature
for application
0 °C
application
functionality on damp support

(see page 3)
½
ideal application on:
• High performance on the most common supports.

• Adhesive mix and supply also designed for industrial and
prefabrication purposes.
• This special mix guarantees gradual and stable adhesion
over time.
for application compatibility to

width length the various construction nodes
CODE pce/
[mm] [m] and supports, please refer to
D52145 60 25 24 4 and 8.
32
FROST BAND pre-cut liner

different versions
ADHESIVE TAPE FOR LOW TEMPERATURES

½
solvent-free (0% VOC)
é ‫פ‬HorªÈe at ºw Zc5atd³
½
room temperature
for application
É to
application
-20 °C

(see page 3)
½
• When applied, it guarantees effectiveness up to -40°C.

• The flexibility of the support ensures high workability
even under extremely cold environmental conditions.
• The 75-mm width make application easier.

CODE pce/
D52414 75 20 12 4 and 8.
33
DOUBLE BAND pre-cut liner

different versions
ACRYLIC BI-ADHESIVE TAPE

½
´ µ b ¸ / G solvent-free (< 0.02% VOC)
( Q
s / Ë Ì ª ÍÎe ÏÂn ½
BÊ+>
room temperature
for application
-10 °C
application

(see page 3)
no!
• Universal: excellent adhesion on all types of material and

under all environmental conditions.
• The reinforcement net ensures stability in case of sudden
temperature changes.
• Invisible sealing, for greater protection against
atmospheric agents and a longer service life.

CODE pce/
D52712 40 50 16 4 and 8.
34
SUN BAND pre-cut liner

different versions
REFLECTING SINGLE-SIDED TAPE

½
Ð¦ÑE ( Q ¯~ G solvent-free (≤ 0.02% VOC)
SUNTEX ½
:f;S BÊ+>s
room temperature
for application
0 °C
application

(see page 3)
½
• It completes the membranes of the SUNTEX line, ensuring

continuity of the thermal reflectance.
• The aluminium coating reflects back up to 75% of solar
radiation.

CODE pce/
D52514 75 20 8 4 and 8.
35
ALU BAND pre-cut liner

different versions
ALUMINIUM SINGLE-SIDED TAPE

½
( Q ÒB,c ¯~ G
~¢/ÓO Ô.d ÕÖ ½
room temperature
for application
+5 °C
application

(see page 3)
no!
• The combination between aluminium and the special

adhesive mix ensures stability in case of sudden tempera-
ture changes.
• Can be applied to thermo-hydraulic structures, thanks to
its high thermal reflectance.

CODE pce/ and supports, please refer to
[mm] [m]
D52622 75 50 18 4 and 8.
36
FRONT BAND pre-cut liner

different versions
SINGLE-SIDED ADHESIVE TAPE RESISTANT TO UV RAYS

½
é ^×°Èe to UV +Ø ½
room temperature
for application
-10 °C
application

(see page 3)
½
• High adhesive strength on the most common supports,

encouraged by the 75-mm width.
• Ideal for facade sealings.
• The Non-Woven Fabric support guarantees excellent
product flexibility.
liner width length

CODE pce/ for application compatibility to
[mm] [mm] [m]
D52314 - 75 20 12 and supports, please refer to
D52317 75 / 75 150 20 8 4 and 8.
37
FRONT BAND UV 210 pre-cut liner

different versions
SINGLE-SIDED ADHESIVE TAPE RESISTANT TO UV RAYS

½
solvent-free (< 0.02% VOC)
^×°Èe to UV RAYS
=gZd / ,B ½
room temperature
for application
0 °C
application

(see page 3)
½
• Support made in monolithic membrane TRASPIR UV

210, for better yield even in the most sophisticated
architectural projects.
• Together with the TRASPIR UV 210 membrane, it ensures
uniformity to the facade, ensuring unlimited stability to
UV rays over time.

CODE pce/
D52334 75 20 8 4 and 8.
38
SEAL BAND pre-cut liner

different versions
SINGLE-SIDED ADHESIVE TAPE FOR INTERIORS

no!
Sat¾+ y: solvent-free (0% VOC)
1. jk-:‫פ‬llbt 43Ã¬Zd ¨‫פ‬r

2. .IXZ Áue ½
3. 8=@>-43Ã¬Zd ¨‫פ‬r room temperature
for application
-10 °C
application
1 functionality on damp support

2 (see page 3)
3
no!
Ð¦ÑE ( O©s, @Ù5s l ÚLE~ nos
• The double or triple liner makes the laying easier, for

improved workability.
• Support made of impregnated paper, ideal for indoor use.
• Air tightness guaranteed over time.
liner width length

[mm] [mm] [m]
D52214 30 / 30 60 40 5 and supports, please refer to
D52215 15 / 15 / 30 60 40 5 4 and 8.
39
SEAL SQUARE pre-cut liner

different versions
PRE-SHAPED SEALING ADHESIVE ELEMENT

no!
¤l ( Ûx Ü;s ±²O

by zÞ ½
room temperature
for application
-10 °C
application

(see page 3)
no!
• Pre-cut, for fast and accurate application.

• It can be laid and worked with no tools required.
• The 180x180 mm size ensures the effective closing of torn
membranes and holes in general, including large-diame-
ter ones.
width length
CODE piece/roll for application compatibility to
[mm] [mm]
D52220 180 180 200 and supports, please refer to
D52218 150 150 200 4 and 8.
40
MAXI BAND pre-cut liner

different versions
MAXI WIDTH ADHESIVE STRIP

½
I~ ( ¯~ ¸/ʦ Js mu¼; ÚIà solvent-free (< 0.02% VOC)
/ a 8ŋ; á,о ½
room temperature
for application
-10 °C
application

(see page 3)
½
• Guarantees air and water tightness.

• The integrated adhesive bands allow quick and continu-
ous laying even on large surfaces.
• Breathable, so it has no impact on the vapour diffusion of
the stratigraphy to which it is added.

[mm] [m]
D67284 275 100 1 4 and 8.
41
PLASTER BAND pre-cut liner

different versions
ADHESIVE STRIP WITH VARIABLE VAPOUR DIFFUSION

½
solvent-free (< 0.02% VOC)
( r-,et @¥¦,оs ½
sat ±n be p]5O
room temperature
for application
+5 °C
application

(see page 3)
no!
• The integrated mesh makes laying easier and it simplifies

wall-roof and window/door frame/masonry wall
connections.
• Smart: vapour diffusion changes as the environmental
conditions where it works change.
• Universal: it can be used in combination with a vapour
retardant or breathable membrane.

[mm] [m]
D67428 140 30 2 4 and 8.
42
KOMPRI BAND ETA07/0072

pre-cut liner
different versions
TAPE MADE OF SELF-EXPANDING FOAM

½
é ‫פ‬HorªÈe âb !b solvent-free (< 0.02% VOC)
hff5bt ªkä! # ²O l о ½
9X p:"r 0HI³
room temperature
for application
+5 °C
application

(see page 3)
no!
• It seals cracks from 1 to 20 mm, ensuring air tightness and

resistant to pouring rain.
• Excellent for closing cracks, it ensure high thermal insula-
tion and good protection against fire.
width length expansion s crack

CODE pce/
[mm] [m] [mm] [mm]
D63512 10 13 10 1-4 30
D63514 15 13 10 1-4 20
D63532 15 8 20 4 - 10 20 for application compatibility to
D63552 15 4.3 30 6 - 15 20 and supports, please refer to
D63572 20 3.3 45 9 - 20 15 4 and 8.
43
FRAME BAND EN13984

pre-cut liner
different versions
SELF-EXPANDING SEALING TAPE FOR WINDOW/DOOR

FRAMES ½
to ¯~ Q @¥¦,о be#·n solvent-free (< 0.02% VOC)
[or/J$Þ %è - ]&Sde ½

room temperature
for application
+5 °C
application

(see page 3)
no!
• It effectively seals cracks from 2 to 10 mm, can withstand

pouring rain.
• It ensures tightness to air and water, carrying out a va-
pour retardant function.
• It complies with EnEV and RAL requirements, and guaran-
tees a high level of thermal and acoustic insulation.
width length expansion s crack

[mm] [m] [mm] [mm]
D67413 54 30 20 2 - 10 7 and supports, please refer to
D67416 74 30 20 2 - 10 5 4 and 8.
44
BORDER BAND EN13984

pre-cut liner
different versions
HERMETIC JOINT THAT CAN BE PLASTERED

½
D67424 solvent-free (< 0.02% VOC)
D67422
½
room temperature
for application
+5 °C
application

(see page 3)
I~ ( Np='n no!

to p]5(md l p]5 ideal application on:
• Flexible, air-tight element used to seal plaster-structure

connections.
• Equipped with butyl adhesive band, it performs very well
on porous surfaces such as plaster and concrete.
• Technical fabric that can be plastered.
width length
CODE version pce/
[mm] [m] for application compatibility to
D67422 double butyl band 90 30 3 and supports, please refer to
D67424 butyl band and plaster mesh 145 30 2 4 and 8.
45
BLACK BAND pre-cut liner

different versions
SINGLE-SIDED, BUTYL SELF-SEALING TAPE

½
6Ò³ to Q )] @*о 0HI³
+llÞ Qp ÂNe ½
room temperature
for application
0 °C
application

(see page 3)
no!
• Universal and deformable, it effectively seals any crack on

the most widely used construction materials.
• With double liner, ideal for easy sealing even in tight and
irregular corners.
• Self-sealing even at low temperatures.
liner width length

[mm] [mm] [m]
D63204 50 50 10 6 and supports, please refer to
D63206 40 / 40 80 10 4 4 and 8.
46
SUPRA BAND pre-cut liner

different versions
BI-ADHESIVE BUTYL TAPE

½
VAllbt ‫פ‬HorªÈe о Æ Fs G 01orʦ solvent-free (0% VOC)
l r Uy b,-b°l @$Ln
½
room temperature
for application
-5 °C
application

(see page 3)
½
• Water and air resistant, it guarantees adhesion even to

wet supports and at low temperatures.
• Ideal for membrane-plaster and membrane-concrete
sealings.
• Elastic, also suited for sealing wood-wood joints (it
compensates for the natural movements of the material).

thickness width length the various construction nodes
CODE pce/
[mm] [mm] [m] and supports, please refer to
D63627 4 6 6 16 4 and 8.
47
HERMETIC FOAM pre-cut liner

different versions
CLOSED-CELL ELASTIC PU FOAM

½
solvent-free (19.4% VOC)
½
room temperature
for application
-10 °C
application

(see page 3)
½
r ,e.³s
Ls ÛxO-All (mu b0^Np=O ideal application on:
âb Ñ 4Bd k be
• It seals air-tight any type of crack on a wide range of

materials.
• Excellent acoustic abatement values (IFT Rosenheim test).

content yield the various construction nodes
CODE cartridge pce/ and supports, please refer to
[ml] [L]
D69202 750 38 aluminium 12 4 and 8.
48
product
CONNECT BAND
EDPM WALL BARRIER FOR FOUNDATIONS
EN13984 Co D67262 Co D67264
r-,eten³s + 30¦,о
1t §8ŋ Yc
width length
CODE pce/
[mm] [m]
D67262 100 25 3
D67264 250 25 1
product
PROTECT
EN13956
BUTYL WALL BARRIER FOR FOUNDATIONS EN13967
¯2-6‫ה‬89,
±n be p]5O
width length
CODE pce/
[mm] [m]
D67222 330 10 2
D67225 500 10 1
product
GROUND BAND
EN13707
SELF-ADHESIVE BITUMINOUS MEMBRANE EN13969
EN14967
¯2-¯~
[³ not :ope Q ²e G a fB
width length
CODE m2 pce/
[m] [m]
D67242 1 20 20 1
49
family
BUTYL SEALANTS
product
BUTYL BAND
EN13956
BI-ADHESIVE BUTYL TAPE EN13967
:/(Ad Js .³k BÂ
width length thickness

CODE pce/
[mm] [m] [mm]
D63414 15 15 1 20
D63432 9 10 2 22
D63434 15 10 2 13
product
ROND BAND
EN13956
BUTYL STRIP EN13967
Ð¦ÑE ( 3:bO be`s or

BºT² jlls
diameter length
CODE pce/
[mm] [m]
D63624 8 6 16
product
BUTYL GLUE
BUTYL GLUE IN STRIPS
50-* 9n sat ±n ~á be

²O а a ¬® ./t

CODE pce/
[mm] [m] [mm]
D63423 30 10 1.5 1
D63425 50 10 1.5 20
50
family
PROFILES
product
KENAF BAND
INSULATING FELT 100% NATURAL FIBRE
( 3:bs
/ BºT²
@uS

CODE pce/
[mm] [m] [mm]
D67474 80 25 8 7
product
TIE BEAM STRIPE

PROFILE BELOW TIE BEAM
§,³
L @cb)Zs p:"be#·n
/ Q ¯~
hff5bt 0HI³
width length height

CODE pce/
[mm] [m] [mm]
D67644 71 50 9 1
product
CONSTRUCTION SEALING
EDPM GASKET FOR JOINTS
L ÒB,±lly ¯~s
ËR-ËR ¸/ʦ
width length initial s

CODE pce/
[mm] [m] [mm]
D63482 46 300 3 1
51
family
SLEEVES
product product
MANICA SINGLE MANICA MULTI

SEALING SLEEVE FOR PIPES MULTIPLE SEALING SLEEVE FOR PIPES
diameter gluing support

CODE pce/
[mm] [mm]
D66221 4-8 150 x 150 10
D66222 8 - 12 150 x 150 10
D66223 15 - 22 150 x 150 10
D66224 25 - 32 150 x 150 10 diameter gluing support
CODE pce/
D66225 42 - 55 230 x 230 4 [mm] [mm]
D66226 75 - 90 230 x 230 4 D66252 6 x 16 - 25 320 x 320 4
product product
MANICA PLASTER MANICA POST

SEALING SLEEVE THAT CAN BE PLASTERED SEALING SLEEVE ^×°C
FOR OUTDOOR APPLICATIONS to UV RAYS
L ±n be p]5O codes and dimensions
diameter gluing support

codes and dimensions CODE pce/
[mm] [mm]
diameter gluing support D66423 25 - 32 400 x 300 5
CODE pce/
[mm] [mm] D66424 42 - 55 400 x 300 5
D66352 100 - 125 350 x 350 4 D66435 42 - 55 230 x 230 4
52
family
CHEMICAL SEALANTS
product product
MEMBRANE GLUE SUPERB GLUE

ADHESIVE GLUE FOR MEMBRANES ADHESIVE GLUE FOR MEMBRANES
( ¯~ ¸¹ о
ªá5y jl or p]5
é ‫פ‬Ubt
а,4i
codes and dimensions codes and dimensions
content content
CODE cartridge pce/ CODE cartridge pce/
[ml] [ml]
D69522 310 plastic 1 D69532 310 plastic 12
D69524 600 soft 20 D69534 600 soft 12
product product
UNIVERSAL GEL SEALING FOAM

EN50393
INSULATING GEL IP68 POLYURETHANE FOAM
@ D69203
ªν~
ËÌ
Zc5atde f
-60°C to +200°C @ D69204
( no7;s

content yield
CODE cartridge pce/
content [ml] [L]
CODE cartridge pce/
[ml] D69203 750 34 aluminium 12
D69602 280 plastic 36 D69204 750 48 aluminium 12
53
family
NAIL POINT SEALANTS

product product
NAIL BAND NAIL PLASTER

BUTIL NAIL POINT SEALANT PE NAIL POINT GASKET
]&Sde Js
ÛxO Alls
é а,4i
l 6‫ה‬8о
measure thickness
CODE length pce/
width length thickness [mm] [mm]
CODE pce/
[mm] [m] [mm] D62202 50 30 m 3 10
D62102 50 15 1 12 D62208 50 x 50 400 pcs 3 6
product product
GEMINI GIPS BAND

PE NAIL POINT GASKET ELASTIC GASKET FOR PROFILES
Iy]E 30¦,о
l r ,e.³s
ÛxO-All
]&Sde +
a-6‫ה‬89
CODE pce/
[mm] [m] [mm] width length thickness
CODE pce/
D62302 80 30 3 10 [mm] [m] [mm]
D62303 60 30 3 D67464 50 30 3 10
54
family
ACCESSORIES
product product
TUBE STOPPER ALPHA

PLUGS FOR ELECTRICAL CONDUITS PRE-SHAPED REINFORCING CORNERS
/8
yʦ¤e @ D67452 @ D67454

diameter
CODE PG M pce/
[mm] width length height
CODE pce/
D66622 20 11 20 20 [mm] [m] [mm]
D66623 25 16 25 20 D67452 180 180 100 10
D66624 32 21 32 20 D67454 160 100 100 10
family
PRIMER
product product
6 - 10 PRIMER
SPREADABLE BITUMINOUS SHEATH UNIVERSAL PRIMER FOR ACRYLIC TAPES
±n be ,;d l
¨/Zd
( 9X .²
0HI³
content content
CODE pce/ CODE colour pce/
[kg] [kg]
D38622 10 1 D69702 1 transparent 1
55
family
EQUIPMENT
product product product
LIZARD BRUSH ROLLER

BRUSH ROLLER FOR TAPES
@ RLL40
UNWINDER FOR
SEALING TAPE @ RLL45
NAIL POINT

measure
CODE pce/
measure [mm]
CODE pce/ CODE pce/
[mm] RLL40 40 1
LIZARD 1 BRS560 5 x 60 1 RLL45 45 1
MARLIN MARLIN STAPLER

MARLIN FOR PROFESSIONAL HAMMER CUTS

CODE pce/
CODE pce/ CODE version pce/
MARLIN 1
MARBLA 10 MARLIN 1 HH735347 6 - 10 1
STAPLER FLY 401 FOAM CLEANER

MANUAL NOZZLE FOR SEALANTS DETERGENT FOR NOZZLES
WITH CARTRIDGES
codes and dimensions codes and dimensions codes and dimensions
version content
CODE version pce/ CODE pce/ CODE pce/
[ml] [ml]
RTHH14B 6 - 14 1 FLY401 300 1 FLYCLEAN 500 1
56
notes
01SBAIRT1EN
1500553_03 | 08-15
Rotho Blaas srl - I - 39040 Cortaccia (BZ) - Via Dell’Adige 2/1

Tel. +39 0471 81 84 00 - Fax +39 0471 81 84 84
info@rothoblaas.com - www.rothoblaas.com COD

ROTHOBLAAS - Air-Tightness-Smartbook

Uploaded by

Copyright:

Available Formats

ROTHOBLAAS - Air-Tightness-Smartbook

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ROTHOBLAAS - Air-Tightness-Smartbook

Uploaded by

Copyright:

Available Formats

S!

ACRYLIC TAPES SELF-EXPANDING PROFILES

NAIL PLASTER page 53 GIPS BAND page 53

PROFILES MANICA SINGLE page 51 MANICA POST page 51

CONSTRUCTION KENAF BAND page 50 !at # $

20° 17° 14° )*+,о ./t

How is a tape made?

CHOOSE A SEALING PRODUCT OR TAPE

to !Eh F G 0HIe Jll L be Np=O?

`abt: Zc5atde, =et, fghi, jk?

[ I know Q ]^s L Jll be 0b_SO to ?

]lmn or :opqbʦ to be @c=O Js?

Does Q 3RuS T9 U VpiX YZ?

HOW TO STORE A TAPE OR SEALING PRODUCT

Product performance is guaranteed only if the Keep the tapes

A PRODUCT FOR EACH TYPE OF CONSTRUCTION NODE

DOOR/WALL FRAME  WALL

CHIMNEYS AND VENTS

A PRODUCT FOR EACH TYPE OF CONSTRUCTION NODE

DOOR/WALL FRAME  WALL

CHIMNEYS AND VENTS

ROUGH OSB, PREFERABLY WITH PRIMER

UNTREATED PVC, PLEXIGLAS OR PLASTIC

ROUGH OSB, PREFERABLY WITH PRIMER

SUPPORT MADE OF BITUMEN AND POLYPROPYLENE

POLYAMIDE SURFACE k.e. CLIMA CONTROL

ALUMINIZED SURFACE i.e., BARRIER200

POLYPROPYLENE SURFACEi.e., TRASPIR150

ROUGH OSB, PREFERABLY WITH PRIMER

SUPPORT MADE OF BITUMEN AND POLYPROPYLENE

POLYAMIDE SURFACE k.e. CLIMA CONTROL

POLYETHYLENE SURFACEi.e., BARRIER40

POLYPROPYLENE SURFACEi.e., TRASPIR150

ROOF AND WALL IN XLAM (Cross Laminated Timber)

FLEXI BAND page 30

KOMPRI BAND page 42

NAIL BAND page 53

STRUCTURE IN XLAM (Cross Laminated Timber) WITH VENTILATED WALL

BUTYL GLUE page 49

KOMPRI BAND page 42

GROUND BAND page 48

BYTUM LIQUID page 54

MAXI BAND page 40

FLEXI BAND page 30

BUTYL BAND page 49

CONNECT BAND page 48

RAISING ON CONCRETE AND MASONRY WALL

SEAL BAND page 38

KOMPRI BAND page 42

SEAL SQUARE page 39

KOMPRI BAND page 42 CONNECT BAND

~k¬,9­, B Ge

HERMETIC FOAM page 47

KOMPRI BAND page 42

SEAL BAND page 38

NAIL BAND page 53 NAIL BAND page 53

FRAME WALL WITH WINDOW (INTERNAL VIEW)

BUTYL BAND page 49

SEAL SQUARE page 39

~k¬,9, B Ge