Sor (Patrt-I, Ii, Iii&iv) 3.11.2017 PDF
Sor (Patrt-I, Ii, Iii&iv) 3.11.2017 PDF
Sor (Patrt-I, Ii, Iii&iv) 3.11.2017 PDF
*****
The Schedule of Rates for the year 2017-18 was approved by the BoCEs during the
meeting held on 15-06-2017 based on the then existing system of VAT and excise duty.
Subsequently, proceedings were issued by this office vide reference 2nd cited for printing
and circulation.
Meanwhile, the Central Govt. have issued notification, vide reference 3 rd cited, for
implementation of Goods and Services Tax(GST) which subsumed the taxes like VAT, Excise Duty
etc.
The Government of Andhra Pradesh, vide memo 4th cited, have also instructed to take
necessary action to revise the Schedule of Rates-2017-18 to comply with the GST system.
Accordingly, the Board of Chief Engineers (BoCEs) meeting was conducted on 26.09.2017.
The Engineer-in-Chief (IW), Water Resources Dept., has furnished basic rates for Water
Resources materials duly deleting the VAT and excise duty components from the approved rates of
SoR-2017-18.
Similarly, the Engineer-in-Chief(R&B), Engineer-in-Chief (PH), Chief Engineer (Buildings)
have furnished basic rates for items used by the respective departments.
The Board of Chief Engineers(BoCEs) have approved the basic rates as furnished above
and recommends to arrive Estimated Contract Value(ECV) with the above basic rates and to apply
12% GST on the ECV towards Works Contract to display it in part-B (non-contract value) of the
Estimate.
The approved basic rates are applicable to the items referred in the standard data
approved by the Government vide G.O 1st cited.
For Roads &Bridges works, the rates can be applied for items referred in MoRTH data as
approved in the G.O.Ms.No.2, Transport, Roads &Buildings(R-I) Dept., dt:12.01.2015.
The lead & lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the lead & lift chapter in the WR Works (Part-I) of A.P. Revised
Standard Data.
No other items other than the items communicated by this office shall be introduced in the
SoR.
The Heads of Department and Officers mentioned below are authorized to print the
Schedule of Rates for the year 2017-18.Un-authorized printing & selling of the SoR is strictly
prohibited.
Any discrepancies found or corrections required in SoR 2017-18 may be brought to the
notice of undersigned for issuing corrections.
The revised rates will come into force with effect from 1st July 2017 until 31st May
2018.
The receipt of the proceedings may be acknowledged.
Important Note:
1) The basic rates of all the materials (except for petrol & Diesel) now
approved are exclusive of taxes (i.e., VAT, Excise duty & GST).
2) For Petrol & Diesel, the rates are inclusive of VAT & Excise duty as per
the current policy of Govt. of India
3) For the earlier agreements where there are balance works and where
revision is necessitated due to implementation of GST Act, the
concerned Schedules of rates are to be arrived duly excluding VAT &
Excise duty as applicable.
4) The monthly Govt. approved rates of Steel, Cement & PH items of
earlier years are to be arrived duly excluding VAT & Excise Duty for
preparation of revised estimates, if the rates communicated were
inclusive of VAT & Excise Duty.
5) The monthly Govt. approved rates of Steel, Cement items & PH items
for the months of July-2017 & August-2017 are to be arrived duly
excluding the GST component for preparation of estimates/ revised
estimates.
6) For the preparation of new estimates / revision of earlier estimates,
the monthly approved rates of Bitumen are to be arrived duly
excluding VAT & Excise duty from the rates before 1st July 2017 and
excluding GST from 1st July 2017 onwards, whatever the case may
be.
7) In respect of all the works, the existing provision for Contractor’s
profit &Over Heads is retained.
Sd/-M.Giridhara Reddy,dt:13.10.2017,
Engineer-in-Chief (IW) &
Chairman, BoCE(SoR).
I) Copy communicated to the Secretary to Govt., WR Dept., 4th Block, A.P.
Secretariat Buildings, Vijayawada.
II) Copy communicated to the following Heads of Departments along with Enclosures
for information.
1. Engineer-in-Chief (Admn &SR)., Roads & Buildings Department.
2. Engineer-in-Chief (P.H.), Public Health Department.
3. Engineer-in-Chief (P.R.), Panchayat Raj Department.
4. Engineer-in-Chief (RWS) R W S, Department.
5. Chief Engineer (Buildings), R&B Department.
III) Copies of Scheduled of Rates 2017-18 & Standard Data, Part-1 (WR Dept. Works)
are communicated to the respective e-mail Ids of all the Engineers-in-Chief, Chief
Engineers and Regional Superintending Engineers of Irrigation Circles of
Vijayawada, Guntur, Dowlaiswaram and Chittoor of Water Resources Department
for taking necessary action.
Sd/-M.Giridhara Reddy,dt:13.10.2017,
Engineer-in-Chief(IW)&
Chairman,BoCE(SoR).
Office of the Engineer-in-Chief (IW)
Water Resources Department, Currency Nagar,Vijayawada.
Sub: Schedulu of Rates for the year 2017-18(as per A.P.Revised Standarad Data )-Water Resources
Department(Part-I),Road&Bridge Works(Part-2) and Drinking Water Supply Schemes(Part-4)-
approved-Printing&Communication of SoRs-Reg.
Ref: 1)G.O.Ms.No.49,I&CAD(PW-REFORMS)Dept, dt:02.03.2009.
2)ENC(PH) Lr.No. 146/T4/SoR 2017-18 dt:27.05.2017.
3)ENC(R&B) Lr.No.SoR-II/ ENC/ DEC(R)/ EE(TEC)/ DEE 7/AEE2 /2017 dt:29.05.2017.
4)Industrial Consumer Price Index points obtained from Commissioner,Labour Department for the
months of April,2017 to September,2017.
5)Minutes of BoCEs meeting for Schedule of Rates held on 15.06.2017.
************
The Government have approved A.P.Revised Standard Data vide ref 1st cited. The Schedule
of Rates as per A.P.Revised Standard Data for the year 2017-18 is approved based on the
following.
The Engineer-in-Chief, Public Health Department has furnished draft rates for Public Health
work items and Public Health materials vide ref 2nd cited.
The Engineer-in-Chief(R&B), R&B Department has furnished the draft rates for Roads&
Bridge items for the year 2017-18.
The Chief Engineer (Buildings) has yet to furnish the Part-III of Common SoR i.e.,
Buildings.
For Water Resources Department work items, the regional Superintending Engineers:SE,
IC, Dowlaiswaram, SE,IC,Chittoor have submitted the draft basic rates of materials.The
SE,IC,Guntur has furnished the draft rates for Mechanical and Workshop items. Accordingly, the
draft rates for Water Resources Department are prepared.
The Labour wages are finalized based on market rates keeping in view of the minimum
wages calculated from the index points obtained from the Commissioner, Labour Department vide
ref 4th cited for finalizing the Labour rates SoR 2017-18.
Based on the above proposals, the draft Schedule of Rates for the parts-I ( WR items),Part-
II(Roads&Bridge items)& Part-IV(PH items) are prepared for the SoR year 2017-18 and placed
before the annual Board of Chief Engineers(BoCEs) meeting for approval.The BoCEs has reviewed
and finalized the rates of above three parts during the meeting held on 31.05.2017 at 3.00 P.M in
the Conference hall of ENC(Admn),Ramavarappadu,1st Floor, Vijayawada.
The procedure for the adoption of Water Resources work items, lead &lift charges
(common to all departments) is incorporated in the Annexure-A of SoR.
The approved basic rates are applicable to the datas as per A.P.Revised Standard Data
approved by the Government vide G.O 1st cited.
For Roads &Bridges works, the rates can be applied for MoRTH data as approved in the
G.O.Ms.No.2, Transport, Roads &Buildings(R-I) Dept., dt:12.01.2015.
The lead & lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the lead&lift chapter in the WR Works(Part-I) of A.P.Revised
Standard Data.
No other items other than the items communicated by this office shall be introduced in the
SoR.
The Heads of Department and Officers mentioned below are authorized to print the
Schedule of Rates for the year 2017-18.Un-authorized printing & selling of the SoR is strictly
prohibited.
Any discrepancies found or corrections required in SoR 2017-18 may be brought to the
notice of undersigned for issuing corrections.
The revised rates will come into force from 1st June of 2017.
The receipt of the proceedings may be acknowledged.
Encl:SoR 2017-18 containing Part-I(Water Resources Dept works),Part-II(Roads& Bridge
Works) and Part-IV(Public Health Items).
Sd/-M.V.Ravi Kumar,dt:28.06.2017,
Engineer-in-Chief (I.W.) &
Chairman, BOCEs (SoR).
Note: The rates of materials finalized are as per present APVAT act. From 01.07.2017
onwards GST act is to be implemented.
As and when necessary guidelines are issued by the Government in respect of
GST, the modifications to be incorporated, if any, in SSR will be intimated in due
course.
Sd/-M.V.Ravi Kumar,dt:28.06.2017,
Engineer-in-Chief (I.W.) &
Chairman, BOCEs (SoR).
Important – Read The following
ANNEXURE –A
1) The SPIU(Irrigation), Centre for Good Governance (CGG), Hyderabad has developed
software package linking the basic input data of Irrigation with approved data of
Water Resources work items.
2) The lead and lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the Lead & Lift charges chapter in the Water
Resources Department works (Part-1) of A.P. Revised Standard Data.
The Leads for Steel shall be from the nearest market place to the project area
3) The estimate sanctioning authority shall physically verify each and every Water
Resources work item data incorporated in the estimate with basic input data before
sanction of the estimate. Any lapses or arithmetic errors arising in the sanction of
data’s / estimate due to adoption of the software package lies entirely on the
concerned estimate sanctioning authority only.
4) Any discrepancies / corrections required for improper basic input data appearing in
the approved data’s of Water Resources work items in the software package and
hard copy of SoR & Standard data’s (Part-1) may be brought to the notice of
undersigned for issuing corrections.
Sd/-M.V.Ravi Kumar,dt:28.06.2017,
Engineer-in-Chief (I.W.) &
Chairman, BOCEs (SoR).
Index – WR Items (Part-I)
Sl. No. Description Page No.s
From To
1 Preamble 1 4
2 Labour Rates 5 9
3 Material Rates 10 35
PREAMBLE
1
Part I-Preamble-Common SoR 2017-18
PREAMBLE
a) (i) 25% extra over the rates on labour component of works is allowed in all
Municipal Corporation Limits of Andhra Pradesh except Greater Visakhapatnam
and Vijayawada municipal corporations (up to a belt of 12 Kms. from Municipal
Corporation limits) and other corporations as notified by the Government from
time to time.
(ii) 40% extra over the rates on labour component of works for Greater
Visakhapatnam and Vijayawada Municipal Corporation (up to a belt of 12 Kms.
from Municipal Corporation limits).
(iii) 40% extra over the rates on labour component of works for Amaravati Capital
City area (217 Sq.Km) as declared by the Govt. vide G.O.Ms. No. 141,
MA&UD(M2)Dept., dt:09.06.2015(This is introduced as per the Govt. instructions
issued in Govt.Memo.No.668755/Reforms/2017 dt:14.07.2017)
b) Allow 20% extra over basic rates on labour component of works in all District
Headquarters and the remaining Municipal limits (up to a belt of 12 Kms from
Municipal limits).
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of
labour component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of
labour component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour
component specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,
Tiruchanoor, Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapleswara Swamy
Temple, Kapilatheerthm, Tirupathi and Sri Kalyana Venkateswara Swamy Temple,
Srinivasa Mangapuram , 20% extra over the basic rates of labour component for
Tirupathi Municipal Corporation is allowed.
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds. Only
equivalent number of Man Mazdoor shall be provided in the Jail premises and no
women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works
situated within 10Kms belt of Industrial area of, Ibrahimpatnam, Vuyyuru,
Jaggaiahpeta in Krishna District, Macherla, Gurajala, Challapalli in Guntur District
Garividi in Vijayanagaram District, Renigunta in Chittoor District and Yerraguntla &
Mangampet in Kadapa District, Hindupur, Tadipatri, Anantapur, Guntakal,
Rayalcheruvu, Yadiki of Anantapur District and Adoni, Dhone,Cement Nagar, Nandyal,
Kurnool, Yemmiganur & Bethamcherla of Kurnool District, Anakapally of
Vishakhapatnam District.
2
Part I-Preamble-Common SoR 2017-18
b) 40% extra is allowed for the works located within the interior Agency / Tribal limits,
i.e. for the works located beyond 16 KMs from any all weather route inside Agency /
Tribal.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken as
1.5 times the existing length of the road for the purpose of leads only for
conveyance of materials based on the certificate for the Ghat Road given by the
Superintending Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief Engineer can
adopt the equivalent length of road as 2 ½ times of actual length.
If more than one area allowance ( such as those ) for (1) Municipalities (2)
Agency / Tribal areas (3) Industrial areas are applicable for a particular
situation, only the maximum out of the allowable percentages is to be
allowed.
A. TRIAL TRENCHES:
3
Part I-Preamble-Common SoR 2017-18
B. TRIAL PITS:
II) For pipe lines where the depth is less ….75% extra
than 1.5 times the width
III) For pipe lines where the depth is 1.5 ….120% extra
times or more than the width
Note: 1) The extra percentage is allowed over Common item for all earth works (COM-
MWRK- Manual Works) for corresponding soil and Standard data items. It
includes the charges for all lifts and initial lead but does not include
dewatering charges if any in respect of all the items under (A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted
places are to be allowed for (2/3)rd of the cost and shall not to be allowed in
respect of items involving blasting component which may be taken as 1/3 of
the cost.
3.0 SEIGNIORAGE CHARGES:
The rates of the materials indicated in the SOR are exclusive of Seigniorage
Charges. Appropriate Seigniorage Charges for relevant materials are to be added to
the Unit rate of work item in the estimates as fixed by the Government in
G.O.Ms.No.100 (Industries and Commerce Dept.) dt: 31.10.2015. In case of revision,
the revised rates as fixed by Mines and Geology Department have to be adopted.
4
Part I - Labour Rates-Common SoR 2017-18
LABOUR RATES
5
Part I - Labour Rates-Common SoR 2017-18
LABOUR RATES
S. Rate
Sl
CATEGORY OF WORKER for
No.
2017-18
1 2 3
I. SKILLED CATEGORY:
1 Bar bender 585
3 Blaster 535
8 Foreman 535
1 2 3
28 Operator Shovel / Scraper / Dozer 535
2 Bhisti 420
7
Part I - Labour Rates-Common SoR 2017-18
S. Rate
Sl
CATEGORY OF WORKER for
No.
2017-18
1 2 3
15 Helper Bus/ Ambulance/ Lorry/ Tanker 420
8
Part I - Labour Rates-Common SoR 2017-18
S. Rate
Sl
CATEGORY OF WORKER for
No.
2017-18
1 2 3
4 Woman mazdoor 370
5 Watchman 370
3 Dhobi 440
Note: - 1)The wage should not be less than the minimum wages of schedule of
employment, subject to out turn. 2) 25% extra over the corresponding labour rates in respect
of the work to be done during night time subject to issue of certificate accordingly by the
concerned estimate sanctioning authority for providing in the data and by concerned
Executive Engineer in charge of the work for payment. The night time allowance is applicable
only to the works done under Greater Visakhapatnam Municipal Corporation and Vijayawada
Municipal Corporation limits only.
9
Part I-Basic Input data for WR Work items – Common SoR 2017-18
10
Part I-Basic Input data for WR Work items – Common SoR 2017-18
1 Average of the prevailing market rates, ignoring freak rates, is the criteria for fixing
market rates for materials.
2 The basic rates of all the materials (except for petrol & diesel) are exclusive of taxes (i.e.,
VAT, Excise Duty & GST).
3 For Petrol & Diesel, the rates are inclusive of VAT & Excise Duty as per the current policy
of Govt. of India.
4 The rates for materials are exclusive of Seigniorage charges wherever applicable.
5 The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
6. The rates provided for useful rubble / stone chips from excavation shall be at dump
yard.
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2017-18
1 2 3 4
1 Acetylene gas cum 284
2 Asphalt 80/100 Grade Kg 39
Binding wire Kg 51
3
4 Burnt stone slab 10 cm thick sqm 271
Cement 43 Gr/53 Gr
5 Note: Rate as fixed by the Government tonne 3882
6 Chequered plate Kg 53
Coarse aggregate 10-4.75 mm(excluding Seigniorage
7 cum 860
charges)
Coarse aggregate 20-10 mm(excluding Seigniorage 1170
8 cum
charges)
Coarse aggregate 40-20 mm(excluding Seigniorage 1122
9 cum
charges)
Coarse aggregate 80-40 mm(excluding Seigniorage 622
10 cum
charges)
The aggregate rates mentioned above (from Sl.No.7 to
Sl.No.10) are exclusive of Seigniorage charges but
including blasting charges of Rs.70/cum and 25%
machine crushing charges. However, if the metal is
obtained from hand broken, the blasting and
crushing charges shall be deducted. The aggregate
shall be HB Stone of Granite, Dolamite, Dolerite and
Trap. (Quartzite and Basalt with aggregate impact of
less than 20)
11
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2017-18
1 2 3 4
12 Copper sheet 16 SWG kg 588
Coursed rubble stone 30 x 30 x 45 cm(excluding
13 Each 22
Seigniorage charges)
Coursed rubble stone 30 x 30 x 60 cm(excluding
14 Each 25
Seigniorage charges)
15 Curing Compound Ltr 101
16 D – cord Rm 6
17 Delay - noiseless trunk Each 15
18 Detonating fuse coil Rm 7
19 Detonating shock tube / Cord relays Rm 31
20 Detonator delay type Each 16
21 Detonator electric Each 9
22 Detonator ordinary Each 5
23 Empty cement bag Each 5
24 Explosive ANFO kg 37
25 Explosive ANFO high strength booster kg 57
26 Explosive small dia ( Kelvex-220 or equivalent) kg 54
12
Part I-Basic Input data for WR Work items – Common SoR 2017-18
29 Geo-textile ( filter fabric ) 160 gsm sqm 85
30 Geo-textile ( filter fabric ) 200 gsm sqm 101
31 Geo-textile ( filter fabric ) 250 gsm sqm 116
32 G I Pipe 100 mm dia B Class Rm 622
33 G I Pipe 15 mm dia A class Rm 85
34 G I pipe 25 mm dia A class Rm 135
35 G I pipe 40 mm dia B class Rm 229
36 G I pipe 50 mm dia A class Rm 262
37 G I Pipe 80 mm dia B Class Rm 423
38 G.I Bolts / Nuts and Washers kg 85
39 G.I sheet ( plain ) tonne 53333
40 Hariyala turfing sods sqm 24
41 Hectometer stone one line dressed Each 248
42 Hemp yarn kg 61
43 Honne wood planks cum 41921
44 Hume pipe with collar 150 mm dia Rm 233
45 Hume pipe with collar 300 mm dia Rm 508
46 J- Bolts 30 cm long Each 31
47 Jungle wood planks cum 17855
48 Khandki stone 15 to 20 cm height Each 11
49 Khandki stone 20 to 25 cm height Each 14
50 Khandki stone 25 to 30 cm height Each 16
51 Kilometer stone one line dressed Each 457
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 78
53 LDPE sheet ( Geo membrane ) 750 micron thick sqm 114
54 LDPE sheet ( Geo membrane ) 1000 micron thick sqm 157
55 M S Bolts / Nuts / Washers kg 68
Murrum(including loading charges but excluding
56 cum 185
Seigniorage charges )
57 Oxalic acid Ltr 68
58 Oxygen gas cum 36
59 PVC sealing strip Rm 38
60 PVC water stopper 310 mm wide Rm 398
13
Part I-Basic Input data for WR Work items – Common SoR 2017-18
61 PVC pipe of 100 mm dia Rm 144
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2017-18
1 2 3 4
83 Wire mesh 20 gauge sqm 199
84 Zinc chromate red oxide primer paint Ltr 140
85 inorganic zinc silicate Ltr 481
86 solvent less coal tar epoxy paint Ltr 227
87 Zinc phosphate primer Ltr 173
88 Allkyd based iron oxide paint Ltr 144
15
Part I-Basic Input data for WR Work items – Common SoR 2017-18
ADDITIONAL MATERIALS FOR G A T E S & HOISTS
FOR THE YEAR: 2017-18
GUIDE LINES:
a. For cast steel / Alloy steel / Forged steel / Bronze, aluminum alloy components the rates shall
be inclusive of cost of basic metal for these components, casting / forging charges, machining
charges on finished alloy component.
b. For other materials the rates shall be prevailing market rates.
S. Rate
Sl No. DESCRIPTION OF MATERIAL UNIT for
2017-18
1 2 3 4
1 Alloy steel ( IS : 1570-carbon steel ) shafts Kg 199
16
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl No. DESCRIPTION OF MATERIAL UNIT for
2017-18
1 2 3 4
Rubber corner seal ( Teflon claded )
20 Each 1265
( IS : 11855 ) (36Ø)
21 Rubber corner seal ( un claded ) ( IS : 11855 ) Each 893
(36Ø)
22 Stainless steel plates / flats Kg 233
Welding electrode 4 mm dia x 450 mm (
23 Each 13
radiographic low hydrogen )
Welding electrode 4 mm dia x 450 mm (
24 Each 19
stainless steel )
25 Wire rope 6x37 constn ( IS : 2266 ) Kg 169
26 Zinc Kg 151
27 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr 543
S. Rate
Sl
Description of Material Unit for
No.
2017-18
1 Electric pole with fixtures Each
17
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2017-18
1 2 3 4
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each 1669093
tyres and tubes 6 sets 66764
2 Air compressor 5 cmm electric Each 551189
3 Air compressor 7 cmm diesel Each 737506
4 Air compressor 7 cmm electric Each 671519
5 Air compressor 8.5 cmm diesel Each 842310
6 Air compressor 8.5 cmm electric Each 869481
7 Air compressor 15 cmm electric Each 1063561
8 Angle Dozer 90 hp Each 4250364
9 Batching plant 0.5 cum with accessories(6 Cum/hr) Each 931587
10 Batching plant 2 x 1.00 cum with accessories Each
( 15 Cum/hr) 3295488
11 Batching plant 2 x 1.50 cum with accessories Each
( 50 Cum/hr) 5046094
12 Bending machine Each 448677
13 Clamp shell and hoisting ropes Each 25397
14 Concrete bucket 1.5 cum Each 43474
15 Concrete hand mixer 45/30 ltr Each 12033
16 Concrete mixer 300/200 ltr(diesel) Each 116448
17 Concrete mixer 300/200 ltr ( electric ) Each 112567
18 Concrete mixer 600/400 ltr(diesel) Each 201844
19 Concrete mixer 600/400 ltr ( electric ) Each 197962
18
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2017-18
1 2 3 4
20 Concrete paver 100 Sqm / hr Each 1832897
21 Convey mucker ( excluding tyres ) Each 2992722
tyres and tubes 6 sets 66764
22 Core drilling machine Each 853954
23 Diesel generating set 30 KVA Each 384279
24 Diesel generating set 50 KVA Each 496846
25 Diesel Loco 45 hp Each 1645803
26 Dewatering pump 5 hp diesel Each 31053
27 Dewatering pump 5 hp electric Each 19020
28 Dewatering pump 10 hp diesel Each 46579
29 Dewatering pump 10 hp electric Each 42698
30 Dewatering pump 20 hp diesel Each 147501
31 Dewatering pump 20 hp electric Each 77632
32 Drifter Each 821349
33 Drilling jumbo ( excluding tyres ) Each 1010771
tyres and tubes 6 sets 66764
34 Dumper 4.5 cum ( excluding tyres ) Each 1125667
tyres and tubes 6 sets 66764
35 Geophysical Ele.resistivity meter Each 414847
36 Grouting pump Each 79185
37 Guniting / sand blasting equipment Each 237037
38 Ice plant with accessories 30 t / day Each 1991266
39 Jack hammer Each 50461
40 Needle vibrator 40 mm petrol Each 15526
41 Needle vibrator 40 mm electric Each 16303
42 Needle vibrator 60 mm petrol Each 16691
43 Needle vibrator 60 mm electric Each 19796
44 Planing machine 4 m stroke Each 660317
45 Plate shearing machine up to 12 mm Each 359788
19
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2017-18
1 2 3 4
46 Pneumatic placer 0.5 cum Each 450267
47 Pneumatic tamper Each 65987
48 Pug cutting machine Each 13545
49 Pusher leg Each 44021
50 Road roller diesel 10 t Each 659874
51 Shovel 0.50 cum 75 hp Each 2911208
52 Shovel 0.85 cum 110 hp Each 4952935
53 Stationery derrick crane 5 t Each 506938
54 Tipper 5 cum ( excluding tyres ) Each 1261524
tyres and tubes 6 sets 66764
55 Tipping tub 1.5 cum Each 186317
56 Tower crane 5 tonne Each 5803008
57 Transformer 250 KVA Each 404762
58 Truck 10 t ( excluding tyres ) Each 1145075
tyres and tubes 6 sets 66764
59 Truck mounted derrick crane 5 t ( excluding tyres ) Each 1521591
tyres and tubes 6 sets 66764
60 Upright drilling machine Each 43474
61 Ventilation fan 20 hp Each 220106
62 Vibratory pad foot roller 8 t Each 2290150
63 Wagon drill Each 504609
64 Water tanker 8000 ltr (excluding tyres) Each 1241921
tyres and tubes 6 sets 66764
65 Welding set Each 40635
66 Winch 35 hp electric Each 291121
67 Hydraulic Truck Crane 30T Each 11244444
tyres and tubes 6 sets 143790
68 Hydraulic Truck Crane 16T Each 8066667
tyres and tubes 6 sets 143790
20
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2017-18
1 2 3 4
69 Heavy Duty Airless Spray Painting Equipment Each 378667
70 Concrete Placer Pump(25 Cum/hr)(Electric) Each 2642935
21
Part I-Basic Input data for WR Work items – Common SoR 2017-18
1. The rate provided for ' SUNDRIES' (Lump sum provision for unquantified inputs in the data
rates) shall be updated on the basis of general percentage increase / decrease in the market
rates or on the basis of R.B.I ' All Commodity' index.
2 .The rate for structural steel fabrication shall include cost of all materials (except
structural steel), machinery, labour and one coat of primer painting.
3. Demand charges and electric power charges shall be as per prevailing APEPDCL tariff.
4. Rate of interest on capital cost shall be as approved by Govt or other competent authority.
S Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2017-18
1 2 3 4
1 Air hose 25 mm dia Rm 157
S Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2017-18
1 2 3 4
Lubricants Ltr 220
9
Petrol Ltr 71.68
10
Rivets Kg 85
11
20 Soldering materials LS 14
23 Vulcanizing materials LS 17
28 Gas cutting set ( 2 No’s 15 m hose and nozzle unit ) Each 12275
29 Grease Kg 233
Welding holder set ( cable / holder / gloves / mask 6603
30 Each
etc )
31 Use rate of ropes LS 150
23
Part I-Basic Input data for WR Work items – Common SoR 2017-18
S Rate
Sl No. DESCRIPTION OF MATERIAL UNIT for
2017-18
24
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
1. Average of the prevailing market rates, ignoring freak rates, is the criteria for fixing market
rates for materials.
2 .The rates for materials are exclusive of VAT, Excise Duty & GST (except for Petrol & Diesel).
3. For Petrol & Diesel, the rates are inclusive of VAT & Excise Duty as per the current policy
of Govt. of India.
4 .The rates for materials are exclusive of Seigniorage charges wherever applicable.
5 .The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
S. Rate
Sl. No. Description Unit for
2017-18
1 2 3 4
Quarried stone 150 - 200 mm size for Hand Broken 140
M-002 Cum
(Excluding Seigniorage charges)
Boulder with minimum size of 300 mm for Pitching 156
M-003 Cum
(Excluding Seigniorage charges)
Coarse sand for filling (Excluding Seigniorage Rate as per item
M-004 charges) Cum no.27(b) of material
of WRD
Coarse sand for mortar(Excluding Seigniorage Rate as per item
M-005 charges) Cum no.27(a) of material
of WRD
Fine Sand (Excluding Seigniorage charges) Rate as per item
M-006 Cum no.28 of material of
WRD
Rate as per item
M-007 Murrum (Excluding Seigniorage charges) Cum no.56 of Material
rates of WRD.
M-008 Gravel/Quarry spall(Excluding Seigniorage Charges) Cum 110
M-009 Granular Material or hard Murrum for GSB works Cum Deleted
Granular Material or hard Murrum for GSB
M-010 Cum
works(Excluding Seigniorage charges) 92
M-011 Fly ash conforming to IS: 3812 ( Part II & I) Cum 61
25
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
S. Rate
Sl. No. Description Unit for
2017-18
1 2 3 4
Filter media/Filter Material as per Table 300-3
M-012 (MoRT&H Specification) (excluding Seigniorage Cum
Charges) 332
Close graded Granular sub-base Material 53 mm to
M-013 Cum
9.5 mm (excluding Seigniorage Charges) 639
Close graded Granular sub-base Material 37.5 mm to
M-014 Cum
9.5 mm (excluding Seigniorage Charges) 656
Close graded Granular sub-base Material 26.5 mm to
M-015 Cum
9.5 mm (excluding Seigniorage Charges) 680
Close graded Granular sub-base Material 9.5 mm to
M-016 Cum
4.75 mm (excluding Seigniorage Charges) 567
Close graded Granular sub-base Material 9.5 mm to
M-017 Cum
2.36 mm (excluding Seigniorage Charges) 558
Close graded Granular sub-base Material 4.75mm to
M-018 Cum
2.36 mm (excluding Seigniorage Charges) 489
Close graded Granular sub-base Material 4.75mm to 469
M-019 cum
75 micron mm((excluding Seigniorage Charges)
Close graded Granular sub-base Material 2.36 mm 469
M-020 Cum
(excluding Seigniorage Charges)
Stone crusher dust finer than 3mm with not more than
M-021 10% passing 0.075 sieve. (excluding Seigniorage Cum
Charges) 343
Coarse graded Granular sub-base Material 2.36 mm
M-022 Cum
& below (excluding Seigniorage Charges) 420
Coarse graded Granular sub-base Material 4.75mm to
M-023 cum
75 micron mm (excluding Seigniorage Charges) 455
Coarse graded Granular sub-base Material 4.75 mm
M-024 Cum
to 2.36 mm (excluding Seigniorage Charges) 455
Coarse graded Granular sub-base Material 9.5 mm to
M-025 Cum
4.75 mm (excluding Seigniorage Charges) 538
26
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
Delineators from ISI certified firm as per the standard As per local
M-091 Each competitive
drawing given in IRC - 79
quotations
Earth Cost or compensation for earth taken from
M-092 Cum
private land(Excluding Seigniorage Charges) 55
Elastomeric slab seal expansion joint assembly
manufactured by using chloroprene, elastomer for As per local
M-093 Metre
elastomeric slab unit conforming to clause 915.1 of competitive
IRC: 83 (part II), quotations
Electric Detonators @ 1 detonator for 1/2 gelatin stick Rate as per item No.
M-094 100 no’s
of 125 gms each 21 of WRD
Epoxy compound with accessories for preparing 280
M-095 Kg
epoxy mortar
M-096 Epoxy mortar Kg 92
29
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
As per local
M-105 Geo grids Sqm competitive
quotations
M-106 (a)Geo membrane 500 micron thick Sqm Rate as per item No.
52 of WRD
(b) Geo membrane 750 micron thick Sqm Rate as per item No.
53 of WRD
(c) Geo membrane 1000 micron thick Sqm Rate as per item No.
54 of WRD
As per local
M-107 Geo nets Sqm competitive
quotations
M-108 (a)Geo textile 160 gsm Sqm
Rate as per item No.
29 of WRD
(b) Geo textile 200 gsm Sqm Rate as per item No.
30 of WRD
(c) Geo textile 250 gsm Sqm Rate as per item No.
31 of WRD
As per local
M-109 Geo textile filter fabric Sqm competitive
quotations
M-110 GI bolt 10 mm Dia No’s 19
30
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
Nipples 12mm 17
M-129 No’s
Nuts and bolts 85
M-130 Kg
Paint 198
M-131 Litre
M-132 Pavement Marking Paint Litre
M-139 Plastic tubes 50 cm dia , 1.2 m high No’s Rate as per local
M-140 Polymer braids Metre competitive quotations
M-162 Seeds(Grass) Kg 18
Cost of Selected earth (Excluding Seignorage Rate as per Item No.
M-163 Cum
Charges) M-092
Separation Membrane of impermeable plastic Rate as per local
M-164 Sqm
sheeting 125 micron thick competitive
32
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
Sludge / Farm yard manure @ 0.18 cum per 100 sqm Rate as per local
M-167 Cum competitive
at site of work for turfing
quotations
M-168 Sodium vapour lamp Each As per Building SSR
Square Rubble Coursed Stone(Including Loading
M-169 Cum 2130
Charges but excluding Seigniorage charges)
Steel circular hollow pole of standard specification for
M-170 street lighting to mount light at 5 m height above Each Rate to be obtained
deck level from
Electricity/Municipal
Steel circular hollow pole of standard specification for
Departments
M-171 street lighting to mount light at 9 m height above Each
road level
Steel drum 300 mm dia 1.2 m high/empty bitumen As per local
M-172 No’s
drum competitive market
Steel helmet and cushion block on top of pile head rate
M-173 Kg
during driving.
M-174 Steel pipe 25 mm external dia as per IS:1239 Metre 244
33
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
Timber
M-185 Cum
1071
Wooden staff for fastening of flag 25 mm dia, one m
M-196 Each 67
long
Item 8.9 Painting angle iron post Two Coats Sqm As per Building SSR
Miscellaneous Items
Benching old embankment slopes 0.45 X 0.45 M 4.20
1 RM
Laying Sand Bags in the stipulated places including 8.50
cost of empty cement bag, sand, thread,
2 stiching charges and labour charges with per bag
13.615 % overhead charges and contractors
profits.
Rough stone for revetment 225mm thick ( including 138
3 Loading charges but excluding Seigniorage charges) Cum
34
Part I - Materials not covered under WR Work items basic data – Common SoR 2017-18
Thinner 78
5 Ltr
7 Cardium compound kg 92
35
Conveyance Charges of Material – Common SoR 2017-18
Conveyance
Charges of Material
36
Conveyance Charges of Material – Common SoR 2017-18
1. For total lead up to 150 m (including initial lead) lead charges by head load only shall be adopted
irrespective of mode of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be adopted
irrespective of mode of conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire charges per for
each kilometer and up to 5 km are cumulative and inclusive of total charges for Preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates and Stones are for loose
volume and not for compacted or in-situ volume.
5. The rates for lift charges, lead charges, hire charges are cumulative and inclusive of rates for
preceding lift, lead and hire charges.
6. Lift charges are not payable where conveyance of materials is by mechanical means to final
placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for disposal of
excavated materials beyond initial lead of 50 m wherever specified.
9. Loading and unloading charges are not payable for conveyance by mechanical means for
disposal of excavated materials beyond initial lead of 1 km wherever specified.
10. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble, size stone
and cut stone are inclusive of stacking.
11. Hire charges are per 1KM for tippers and trucks for transport of materials from work site to dump
yard and other places are cumulative& includes previous km up to 5 kms
12. The lead & lift charges are inclusive of contractor's profit and overhead charges of 13.615%
13. During the BoCE meeting held on 24-05-2014, it is observed that in some of the
estimates, Lead Charges are being added directly to the material basic rates for
arriving the finished item rate. In view of that, the BoCEs has instructed to see that
while arriving the finished item rate, the lead charges are to be added to the material
basic rates only after deducting the provision of "Contractor's Profit and Overhead
charges"
37
Conveyance Charges of Material – Common SoR 2017-18
1 2 3 4 5
Total lead up to 50 m
1 (covered by item rate) initial lead initial lead initial lead
2 Total lead up to 100 m 60.10 35.00 76.40
3 Total lead up to 150 m 120.10 70.10 152.90
Notes: 1. No loading or unloading charges are admissible for conveyance by head load.
2. For total lead exceeding 150 m conveyance charges by mechanical means only
shall be adopted irrespective of mode of conveyance.
3.The lead & lift charges are inclusive of 13.615% Contractor Profit
and Over Head charges
B.( LEAD) CONVEYANCE CHARGES FOR MACHINERY PER KILOMETER
FOR TRANSPORTING MATERIALS BY TIPPERS AND TRUCKS
EXCLUDING LOADING, UNLOADING AND IDLE HIRE CHARGES OF
MACHINERY FOR THE YEAR: 2017-18
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead) (Lead)
charges for (Lead) charges
(Lead) for trucks
(Lead) charges trucks and charges
charges for per 1000
for trucks and (Lead) charges tippers per for
trucks and nos. of
tippers for for trucks and cu.meter trucks
tippers for bricks
Sl Rubble/Size tippers for for PCC and
Distance Earth / Sand
No. stones/ Cut Cement/ Steel/ slabs/ tippers
/Gravel / Shahabad
Stones/ Coarse RCC poles/ AC per
Murrum/ slabs/ CC &
aggregate per & GI sheets/ cu.met
Lime/ Surki/ Laterite
cu.meter Packed er
per cu.meter blocks/
materials/tonne water/
Wood/ cum 100
0
1 2 3 4 5 6 litre7 8
1 Lead up to 1 km 29.10 28.20 17.70 41.50 s18.10 47.10
2 Lead up to 2 km 40.70 39.50 24.70 58.10 25.30 65.90
3 Lead up to 3 km 54.30 54.30 34.00 79.90 33.80 87.90
4 Lead up to 4 km 66.00 66.00 41.20 97.00 41.00 106.70
5 Lead up to 5 km 77.60 77.60 48.50 114.10 48.30 125.50
for Every km
beyond 5 km up to
6 30 km 11.60 11.60 7.30 17.10 7.20 18.80
for Every km
7 beyond 9.70 9.70 6.10 14.30 6.00 15.70
30 km
Note: The lead & lift charges are inclusive of 13.615% Contractor Profit and Over Head
charges
38
Conveyance Charges of Material – Common SoR 2017-18
Note: The lead & lift charges are inclusive of 13.615% Contractor Profit and Over Head
charges.
Note: The lead & lift charges are inclusive of 13.615% Contractor Profit and Over Head
charges
39
Conveyance Charges of Material – Common SoR 2017-18
Earth / Sand
/Gravel PCC slab/
Murrum/ Lime/ Cement / Shahbad
Total lift Surki/ Reinforce- slab / CC
Sl
( Total lift includes Size stone / Cut ment steel block/ BS
No. initial lift ) stone Str steel slab / Laterite
Rubble / Coarse Rs / tonne / Wood
aggregate Rs / cum
Rs / cum
1 2 3 4 5
Total lift up to 3 m
1 (covered by item rate) Initial lift Initial lift Initial lift
For Every 1.00 Lift
beyond initial lift of 3
2 meters 7.00 5.10 9.30
Note: The lead & lift charges are inclusive of 13.615% Contractor Profit and Over Head
charges
40
Machinery Hire Charges – Common SoR 2017-18
HIRE CHARGES
41
Machinery Hire Charges – Common SoR 2017-18
42
Machinery Hire Charges – Common SoR 2017-18
43
Machinery Hire Charges – Common SoR 2017-18
44
Government of Andhra Pradesh
R&B Department, AP
ROAD & BRIDGE WORKS
1
INDEX
PART-II
ROAD & BRIDGE WORKS
2 Labour Rates 9 13
4 Hire Charges of Plant & Machinery for Road & Bridge Works 26 29
2
PREAMBLE
3
1.0 AREA ALLOWANCES:
a) i) 25% extra over the rates on labour component of works is allowed in all
Municipal Corporation Limits of Andhra Pradesh except Greater Visakhapatnam
Municipal Corporation and Vijayawada Municipal Corporation (Upto a belt of 12 kms
from Municipal corporation limits) and other Municipal Corporations as notified by the
Government from time to time.
ii) 40% extra over the rates on labour component of works for Greater Visakhapatnam and
Vijayawada Municipal Corporation limits (Upto a belt of 12 kms from Municipal
corporation limits)
iii) 40% extra over the rates on labour component of works for Amaravati Capital City area
(217 sq. km.) as declared by the Govt. vide G.O. Ms. No. 141, MA&UD (M2) Dept.,
dt. 09.06.2015 (introduced in SoR 2017-18 as per the Govt. instructions issued in Govt.
Memo No. 668755/Reforms/2017 dt. 17.07.2017,WR Dept.)
b) Allow 20% extra over basic rates on labour component of works in all District
Headquarters and the remaining Municipal limits (up to a belt of 12 Kms. from Municipal
limits)
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour
component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of labour
component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour component
specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,Tiruchanoor,
Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapileswara Swamy Temple,
Kapilatheertham, Tirupathi and Sri Kalyana Venkateswara Swamy Temple, Srinivasa
Mangapuram , 20% extra over the basic rates of labour component for Tirupathi Municipal
Corporation is allowed.
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the works in the Jail compounds. Only equivalent
number of Man Mazdoor shall be provided in the Jail premises and no Women Mazdoor are
allowed inside.
4
C) INDUSTRIAL AREA:
a. 20% Extra over basic rates on labour component works allowed for works situated within 10
Kms belt of Industrial area of Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District,
Macherla, Gurajala, Challapalli in Guntur District, Garividi in Vijayanagaram District,
Renigunta in Chittoor District, Yerraguntla & Mangampet in Kadapa District, Hindupur,
Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District, Adoni, Dhone,
Cement Nagar, Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool District and
Anakapally of Vishakhapatnam District.
a) 25% extra allowed for the works located with in the interior Agency / Tribal limits, i.e.
for the works located with in & upto16 KMs from any all weather route inside Agency /
Tribal.
b) 40% extra allowed for the works located with in the interior Agency / Tribal limits, i.e. for
the works located beyond 16 KMs from any all weather route inside Agency / Tribal.
NOTE: 1. No extra percentage is permissible in respect of Forest produce such as Bamboo, Rellu
grass and for all materials obtained from outside the Agency / Tribal.
2. The extra percentage under Agency / Tribal areas allowance may be allowed on the
labour component and on the labour charges in the rates for conveyance of materials.
3. The extra percentage on cost of materials in Agency / Tribal areas can be allowed on the
labour component only, if they are manufactured in the Agency / Tribal areas itself
except Forest produce.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the
existing length of the road for the purpose of leads only for conveyance of materials based on the
certificate for the Ghat Road given by the Superintending Engineer concerned.
Note: Under compelling circumstances, the concerned Chief Engineer can adopt the
equivalent length of road as 2 ½ times of actual length.
Note for area allowances:
If more than one area allowance ( such as those ) for (1) Municipalities (2) Agency /
Tribal areas (3) Industrial areas are applicable for a particular situation, only the maximum out
of the allowable percentages is to be allowed.
5
2.0 WATER LEADS:
The following labour is allowed for conveyance of water for every ½ Kilometer lead or part
there of over the initial lead of ½ kilometer.
Note:- For Water leads of over 2 KMs, specific approval of Chief Engineer concerned is necessary.
A. TRIAL TRENCHES:
B. TRIAL PITS:
6
VI) For narrow trenches not more than
2 meters in width and depth not less
than twice the width and for excavation … 75% extra
of road boundary drains, model sections
of canals.
Note: 1) The extra percentage is allowed over rate for corresponding soil. It includes the charges
for all lifts and initial lead but does not include dewatering charges if any in respect of all
the items under ( A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted places
are to be allowed for (2/3) rd of the cost and shall not to be allowed in respect of items
involving blasting component which may be taken as 1/3 of the cost.
4.0 Proportion of First class and 2nd class workmen under Skilled Labour:
30% of the skilled labour provided in the data may be taken as 1st Class and the remaining
70% as 2nd Class.
I) The size of stone for the volume range ( 0.015 to 0.030 Cum) shall not be less than
(0.30 X 0.30 X 0.15 to 0.30 X 0. 225 X 0.225m)
II) The size of stone for the volume range (0.011 to 0.015 Cum) shall not be less than
(0.30 X 0.225 X 0.15 to 0.225 X 0.225 X 0. 225 m)
III) The rate of labour component as per the standard data book is to be adopted for
revetment work only. However for apron work Rs. 3.00 per cum. should be
deducted.
IV) For the labour for the “Rock Toe” shall be taken as 2/3rd of the labour charges of
revetment as Chief Engineer, Circular No. P3/ OT2/ T3/ 65167/78, Dt: 19.03.1980.
6.0 Deep cuts:
Deep cuts are defined as reaches of canal where excavation in all soils is for a depth
of excavation 6m and more.The following increase over normal rates is permitted in deep
cuts on a graded basis.
7
V) Beyond 16 m and up to 30 m excavation - 20% extra
VI) Beyond 30 m excavation - 40% extra
NOTE : 1) The extra percentage is only on basic rate. 2) The above percentage are not applicable
for “LEADS & LIFTS”. 3) The above extra percentages are to be allowed only on
items excluding the blasting component which may be taken as 1/3 of the rate.
7.0 The conveyance of bitumen for bulk and packed may be admitted as follows:
9.0 Earthwork excavation rate for Trench cutting, formation of embankment & shoulders,
foundations, removal of unserviceable soil etc., is to be arrived based on the Machinery
adopted in the MoRTH Standard data book for excavation of soil.
10.0 All the Materials and Machinery Hire charges are excluding earlier subsumed taxes i.e VAT
& Excise duty
8
LABOUR RATES
9
Si. S.S. Description Unit S o Rate for Remarks
No Item (Per) 2017-18
No. in Rs.
1 2 3 4 5 6
(A) SKILLED WORKMEN
First Class
1 a Mason and stone cutter Day 465 As per WR Dept.
(S.No.39)
2 b Brick Layer Day 465 As per WR Dept.
(S.No.11)
3 c Carpenter Day 500 As per WR Dept.
(S.No.4)
4 d Painter Day 535 As per WR Dept.
(S.No.35)
5 e Plumber Day 535 As per WR Dept.
(S.No.36)
6 f Welder Day 465 As per WR Dept.
(S.No.41)
7 g Fitter Day 500 As per WR Dept.
(S.No.6)
8 h Electrician Day 540 As per WR Dept.
(S.No.5)
9 1 Cook Day 440 As per WR Dept.
(S.No.2)
Other Category
10 2 Mechanic Day 500 As per WR Dept.
(S.No.12)
11 3 Rigger Day 480
12 4 Rigger Syrang Day 480
13 5 Well Sinker Day 480
14 6 Blaster Day 535 As per WR Dept.
(S.No.3)
15 3 Bar bender Day 585 As per WR Dept.
(S.No.1)
16 7 Tipper and Heavy Vehicle Driver above 12 T Day 535 As per WR Dept.
(S.No.15)
17 Tanker and medium Vehicle driver (7.5 T to Day 480
12 T)
18 Tanker and Light Vehicle driver up to 7.5 T Day 370
10
Si. S.S. Description Unit S o Rate for Remarks
No Item (Per) 2017-18
No. in Rs.
1 2 3 4 5 6
28 Vibrator Day 465 As per WR Dept.
(S.No.32)
29 Composer Day 495
30 Jack Hammer Day 465 As per WR Dept.
(S.No.23)
31 Driller Day 535 As per WR Dept.
(S.No.34)
32 Boring Maistry Day 475
33 11 Pump operator Day 465 As per WR Dept.
(S.No.24)
34 12 Turner Grade-I Day 475
35 13 Wireless Operator Day 535 As per WR Dept.
(S.No.12)
Other Category
36 14 Assistant Wireless Operator Day 440
37 15 Jeep Driver Day 530 As per WR Dept.
(S.No.15)
Other Category
38 16 Work Inspector with I.T.I qualification Day 545 As per WR Dept.
(S.No.9)
Other Category
39 17 Work Inspector with LCE, LME,L.E.E Day 675 As per WR Dept.
qualification (S.No.4)
Other Category
40 18 Work Inspector with B.E (Civil, Mechanical Day 905 As per WR Dept.
and Electrical) qualification (S.No.7)
Other Category
41 19 Work Inspector with Non-technical Day 475 As per WR Dept.
qualification SSLC/SSC/HSC (S.No.10)
13
MATERIAL & WORK ITEM
RATES
14
RATES OF MATERIALS & WORK ITEMS
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
(A) STONE AND ROAD MATERIALS
ROUGH STONE QUARRIED
INCLUDING WEDGING, BREAKING,
BURNING, SPLITTING.
1 22.a For R.R Masonry Work (other than 1 cum 171.45
Granite, Dolomite and Trap)
2 b.i For SS Revetment work 225 mm 1 cum 138.00 As per WR
Dept. (S.No.3)
of
Miscellaneous
items - Material
other than
covered under
irrigation
3 b.ii For SS Revetment work 300 mm 1 cum 156.00 As per WR
Dept. (M 003 of
Material)
Material other
than covered
under irrigation
items
4 b.iii For SS Revetment work 450 mm 1 cum 148.55
5 c Jeddy Stone above 450 mm to 600 mm 1 cum 196.20
6 d i Laterite for revetment 225 mm 1 cum 129.50
7 d ii Laterite for revetment 300 mm 1 cum 151.43
8 d iii Granite for SS revetment 225 mm 1 cum 168.55
9 d iv Granite for SS revetment 300 mm 1 cum 163.80
Note:- Only when other granite is not
available
10 e Laterite for masonry 1 cum 148.55
11 f Cyclopean stones above 0.2 cum 1 cum 278.10
12 g For R.R.Masonry works ( granite, dolamite 1 cum 240.00 As per WR
and trap variety) Dept. (M 148 of
Material)
Material other
than covered
under irrigation
items
13 NOTE:- For items 22(a) to 22© and 22(g) 1 cum 70.00
add extra Rs /cum, wherever quarrying
is done by blasting
COURSED RUBBLE STONE
QUARRYING WEDGING,
BREAKING, BURNING AND
SPLITTING FOR SS FIRST SORT
WORKS
14 23.a Granite, Dolamite and trap 1 cum 274.30
15
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
15 23.b For other varieties 1 cum 197.15
16 27 Granite stone slabs for culverts, lintels and 1 cum 1810.50
copings (3 faces dressed coarsed rubble
masonry)
16
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
27 c - do - 12mm size (SS 5) 1 cum 782.40 As per WR
Dept. (M 052 of
Material)
(excluding
blasting charges
of Rs.70/- and
Machine
crushing
charges of 25%)
36 NOTE:- (1) Add extra Rs. /- per cum for 1 cum 70.00
items 33 (a) to 33 (k) if the metal is
obtained by blasting
37 (2) Add 25% extra per cum if the metal is 1 cum 25%
obtained by machine crushing excluding
17
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
cost of blasting.
18
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
56 l NOTE:- Add extra Rs. /- per cum for 1 cum 70.00 As proposed by
items 33 (a) to 33 (j) if the metal is WR Dept.
obtained by blasting
57 2 Add 25% extra per cum if the metal is 1 cum 25% As proposed by
obtained by machine crushing excluding WR Dept.
cost of blasting.
58 3 Deduct Rs. /- per cum if the metal or 1 cum 9.90
rubble is obtained from surface stones and
boulders
59 4 Add Rs. /- per cum for selection of stones 1 cum 17.00
and boulders from excavated soil dumps for
items 33 (a) to 33 (k), when this addition of
Rs. /- per cum allowed deduction of Rs.
/- per cum mentioned under note (3) above 9.90
should invariably be made
HARD BROKEN STONE OTHER
THAN GRANITE SUCH AS QUARTZ,
QUARTZ-NAPA AND BASALT
SCREENED AND FREE FROM DUST
60 33.q - do - 10 mm size (SS 5) 1 Cum 367.60
61 -do- 9.5 mm to 11.2 mm size ( IRC and 1 Cum 367.60
MORTH )
62 r - do - 12 mm size (SS 5) 1 Cum 344.75
63 -do- 12mm to 14 mm size ( IRC and 1 Cum 344.75
MORTH )
64 S - do - 20 mm size (SS 5) 1 Cum 279.05
65 -do- 19 mm to 22 mm size ( IRC and 1 Cum 279.05
MORTH )
66 T - do - 25 mm size (SS 5) 1 Cum 273.35
67 U - do - 40 mm size (SS 5) 1 Cum 161.90
68 -do- 40 mm to 45 mm size ( IRC and 1 Cum 161.90
MORTH )
69 V - do - 50 mm size (SS 5) 1 Cum 142.85
70 -do- 50 mm to 55 mm size ( IRC and 1 Cum 142.85
MORTH )
71 33.w - do - 65 mm size (SS 5) 1 Cum 135.25
72 -do- 60 mm to 65 mm size ( IRC and 1 Cum 135.25
MORTH )
73 X - do - 75 mm size (SS 5) 1 Cum 111.45
74 - do - 75 mm size ( IRC &MORTH) 1 Cum 111.45
75 Y - do - 75 to 100 mm size (SS 5) 1 Cum 87.60
76 - do - 75 to 100 mm ( IRC& MORTH) 1 Cum 87.60
OTHER ITEMS
77 33.z1 Laterite 40 to 75 mm ( ring) 1 Cum 96.20
78 z2 kankar, hard broken kankar 40 to 75 mm ( ring ) 1 Cum 71.45
19
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
79 z3 Soling stone of 150 mm size of granite, trap 1 Cum 90.50
and Dolamite varieties.
80 NOTE:- (1) Add extra for items to 33(z3) 1 Cum 70.00 As proposed by
Rs /- Per cum, wherever quarrying is done WR Dept.
by blasting. (2) Wherever controlled
blasting is resorted to the Chief Engineer
concerned shall approve the observed data
in support of SS item No. 22 a to 22 c , 22g,
23
81 z4 Soling stone of 150 mm size other than 1 Cum 72.40
granite variety
82 z5 Soling Stone laterite, Kankar 150mm, 1 Cum 44.75
surface stone
83 z6 Field picked metal unbroken 20 mm size 1 Cum 58.10
84 z7 - do - 25 mm size 1 Cum 43.80
85 z8 - do - 40 mm size 1 Cum 50.50
86 z9 - do - 50 mm size 1 Cum 43.80
87 z10 - do - 60 mm size 1 Cum 38.10
88 z11 - do - 80 mm size 1 Cum 33.35
89 NOTE:- Add Rs. /- Per Cum for selection of stone and 17.00
boulders from excavated spoil dumps for items 33 (Q) TO
33 Z , when this addition of Rs. /- per Cum is allowed,
deduction of Rs. /- per Cum should invariably be made
towards the metal or rubble if it is obtained from surface
stone and boulders.
90 34 Gravel 1 Cum 110.00 As per WR
Dept. (M 008 of
Material)
91 35 a Quarry rubbish 1 Cum 84.75
92 B HBG Stone Chips 2.36mm and below 1 Cum 333.00 As per WR
Dept. (Sl.No.67
of Material)
93 36.a Fine aggregate / Sand (un-screened) for 1 Cum 95 As per WR
Concrete & Filtering items) (excluding Dept. (Si. No.
27 of Material)
Seigniorage charges)
94 b. Fine aggregate / Sand (unscreened) for 1 cum 95
filling (excluding Seigniorage charges)
95 c Fine aggregate / Sand (screened) for 1 Cum 170 As per WR
Mortar, Plastering items and Sand blasting Dept. (Si. No.
28 of Material)
items (excluding Seigniorage charges)
(Rs. 70/- is added towards screening
charges)
96 37 Clay for puddle and masonry Items 38 (a) 1 Cum 38.00
to 39 (h) As per local prevailing rates based
on competitive quotations.
(C) LIME AND CEMENT
97 40 to As per local
prevailing
20
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
41(c ) rates based on
competitive
rates
98 42 Cement excluding cost of empty cement 1 MT 3882.00 Monthly rates
bags will be
communicated
by the Govt
NOTE: (1) The rates are exclusive of VAT, Excise duty and GST 2) The price of
cement will be reviewed and fixed on monthly basis and rates will be communicated
separately.
23
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
156 1 (ii ) (For compact thickness of soft metal)
157 A 50 mm thickness 10 sqm 53.80
158 B 75 mm thickness 10 sqm 63.90
159 C 100 mm thickness 10 sqm 70.10
5 Picking old metalled surface to a depth of
40 to 100 mm and spreading metal
including watering with an initial lead of 2
Hectometers and rolling with power rollers
watering and spreading gravel for blindage
and power roller rolling including hire
charges of power roller( 8 to 10 T )
barricading and diversion of traffic and
wetting the new consolidation for a
fortnight(for compacted thickness of )
HARD METAL
160 5 (a) 40 mm thick ness 10 sqm 185.00
161 (b) 50 mm thick ness 10 sqm 210.00
162 (c ) 75 mm thick ness 10 sqm 231.00
163 (d ) 100 mm thick ness 10 sqm 248.80
164 (e) 150 mm thick excluding hire charges 10 sqm 445.40
165 Gelatin(For MORTH data, for works of state Per Kg 57.00 As per WR
& national high ways only) Dept. (M 104 of
Material) other
than covered
under irrigation
167 Hot applied thermoplastic compound(For Per litre Rate as per As per WR
MORTH data, for works of State & National local Dept. (M 118 of
Material other
high ways only) competitive than covered
quotations under Irrigation
Items)
24
RATES OF
MATERIALS S.S. S o Rate Remarks
Unit
& WORK Item Description for 2017-18
(per)
ITEMS SSI No. in Rs.
No.
1 2 3 4 5 6
172 Fly Ash 1 cum deleted
25
HIRE CHARGES OF PLANT
AND MACHINERY
26
HIRE CHARGES OF PLANT& MACHNIERY FOR
ROAD & BRIDGE WORKS FOR THE YEAR 2017-18
8 Smooth wheeled Soil compaction ,BM Per Hour 1137.90 As per WR dept.
roller 8 tonne compaction (S.No.50)
29
PART-IV
PUBLIC HEALTH ITEMS
PUBLIC HEALTH ITEMS
Sl. Description Unit SoR for
No. 2017-18
1 2 3 4
1 RATES OF LABOUR (SKILLED WORKMEN)
1. Caulker Per Day
2. Plumber 1st Class Per Day
3. Plumber 2nd Class Per Day
4. Sewer Cleaner Per Day As per
5. Well Sinker Per Day Labour
6. Pipe line Fitter 1st Class Per Day rates of
7. Pipe line Fitter 2nd Class Per Day SoR
8. Pump Operator Per Day
9. Bore Mechanic Per Day
10. Light Vehicle Driver Per Day
Note: The rate at relevant item in common SoR is
applicable for occasional employment.
2 RATES FOR EARTH WORK :
a. Earth work excavation in all types soils for pipe To follow
lines, for drainage and water supply, where the the
depth is more than 1.5 times the width. relevant
b. Earth work excavation in all types soils for pipe items of
lines, for drainage and water supply, where the Irrigation
depth is less than 1.5 times the width. work
c. Earth work excavation in all types soils for open items as
trenches, for valve pits, inspection chambers, etc. per AP.
Standard
data
3. Excavation of pipe line trenches for drainage and
a. water supply in rock requiring blasting with initial
lead and lift including cost of blasting materials
where the depth is more than 1.5 times the width,
in places where there is no habitation.
b. Excavation of pipe line trenches for drainage and
water supply in rock requiring blasting with initial
lead and lift including cost of blasting materials
where the depth is less than 1.5 times the width, in
places where there is no habitation.
c. Cutting rock for pipe line trenches by hammers,
knuckles and chisels including stacking where the
depth is 1.5 times or more than the width.
d. Cutting rock for pipe line trenches by hammers,
knuckles and chisels including stacking where the
depth is less than 1.5 times the width.
1
e. Cutting rock for works other than pipe lines
trenches by hammers, knuckles and chisels
including stacking.
2
8. Lowering C.I. / D.I. Pipes (all classes) and specials To follow
a. (fittings) with s/s ends carefully into trenches and as per AP.
laying them true to alignment and gradient Standard
including all sundries but excluding cost and data
conveyance of pipes from source of supply (Ref to
specifications. BIS No.3114/1994)
Diameter of Pipe/Fittings in mm :
80mm to 1000mm dia. Per Meter
5
17 Labour charges for fixing Air valves including boring the
mains and threading the bore fixing nipple etc., complete.
Dia. of Air valve in mm.
25 Each To follow
40 Each as per A.P.
Standard
data
50 Each 177
65 Each 188
80 Each 204
100 Each 242
125 Each 376
150 Each 412
18 Labour charges for fixing Kinetic Air Valves with isolating
Sluice valves, Double Air valves/ Air Cushion valve
excluding cost of jointing materials such as bolts, nuts and
rubber insertions etc., complete.
Dia. of Air valve in mm.
25 Each 167
40 Each 189
50(Double Air valves) Each 201
65 Each 215
80 Each 235
100 Each 274
125 Each 428
150 Each 469
19 Uprooting C.I. / DI Pipes by melting the lead, loosening
the joints, scraping the pipes, hoisting and keeping within
a lead of 10 m but excluding earth work excavation and
refilling.
80mm to 600mm Per Meter To follow
as per AP.
Standard
data
20 Uprooting of RCC pipes including breaking the collars,
loosening the joint, separating the pipes, hoisting and
keeping within a lead of 10 m but excluding earthwork
excavation and refilling.
100mm to 300mm Per Meter To follow
as per AP.
Standard
data
21 Removing old G.I. pipes and specials / fittings and
cleaning, scraping the pipes, hoisting and keeping within
50m lead but excluding earth work excavation of trenches
and refilling.
Dia. of Pipes in mm
15mm to 50mm Per Meter To follow
as per AP.
Standard
data
6
22 Cutting C.I./ DI Pipes without water in mains Dia. of pipes
in mm.
Dia. of Pipes in mm
80mm to 600mm Each cut To follow
as per AP.
Standard
data
680 Each cut 520
700 Each cut 534
750 Each cut 575
800 Each cut 612
900 Each cut 687
1000 Each cut 764
1100 Each cut 842
1200 Each cut 918
23 Cutting A.C. Pipes without water in mains Dia. of pipes in
mm.
Dia. of Pipes in mm
80 Each cut 34
100 Each cut 34
125 Each cut 34
150 Each cut 34
200 Each cut 35
250 Each cut 58
300 Each cut 58
350 Each cut 72
400 Each cut 79
450 Each cut 98
500 Each cut 109
600 Each cut 120
24 Drilling and tapping CI/ DI / GI Main and fixing brass
screw down ferrule and plug.
10 mm to 20mm Each To follow
Tapping as per AP.
25 mm to 40mm Each Standard
Tapping data
25 Cutting road surface including stacking of excavated
materials for pipe line trench work.
a) Cutting open B.T. road surface (as well as asphalt 10 Sqm 656
concrete up to 75 mm thick) including water bound
macadam
b) Cutting open C.C. road surface with concrete saw cutter 1 Cum 2,004
c) Cutting open water bound macadam road including 1 Cum 224
soiling
26 Bailing out water.(For PH item)
a) Bailing out water from the pipe line trenches with oil HP/Hour 56
engine driven pump sets, including hire charges, fuel
charges and wages for Driver and Helper.
b) Bailing out water from the pipe line trenches with HP/Hour 39
Electric Driven pump set including hire charges, current
charges and wages for Driver and Helper.
7
NOTE:- The rate is payable on the total H.P. hours ignoring fractions less than 0.5 HP
hour and rounding off 0.5 HP hour or more to the next higher integer.
27 Shoring and strutting of trenches for water and sewer
main
a) Single Staging from (0 to 2.5 Mts.) 1 Sqm of To follow
Shoring as per AP.
area Standard
b) Double staging from (2.5 m to 4.5 Mts.) 1 Sqm of data
Shoring
area
28 Barricading, hoarding, lighting and watching etc., for 1 RMT To follow
water supply and sewerage works for trenches. as per AP.
Standard
data
29 Excavation of trenches for infiltration galleries, siphon
lines and connecting mains in all soils under water
including all leads, lifts, shoring, strutting, bailing out
water and removal of shoring and strutting materials,
after completion of pipe line work.
a) 0 to 1 m deep under water. 10 Cum 11671
b) 1 to 2 m deep under water. 10 Cum 16717
c) 2 to 5 m deep under water. 10 Cum 25092
d) Beyond 5 m deep under water for every additional 1 m 10 Cum 4794
depth over item 'c'
NOTE:- The above rates do not include rock requiring
blasting or chiselling
30 Laying and jointing perforated RCC pipes inclusive of Per Meter 36
bailing out water and jointing with cement fillets and all
other incidental charges for infiltration gallery inclusive
of bailing out water by pumping to keep the trench
reasonably dry to facilitate the work excluding cost of
perforated pipes and collars.
Per every 25 mm dia.
31 Centring and scaffolding charges for RCC members
including all materials and labour charges for forming and
dismantling.
a) for R C C Elevated Service Reservoir of staging up to 15 One Sqm of
Meter below L W L. Centring
1) Slabs for thickness (150 mm to 300 mm) area 3662
2) Slabs for thickness above (300 mm) 7323
3) Side walls curved surfaces. (rate is for both sides 2767
centring)
4) Side wall straight surfaces. (rate is for both sides 2462
centring)
5) Dome. 3000
6) Roof Slab. 1846
7) Column braces and beams 1235
8) Circular braces, ring beams & circular column. 1355
8
Note: - For RCC ELSR of staging above 15 m, the %
increase in these rates shall be as follows.
15-18 m ---- 9%
18-21m --- 15%
21-24 m --- 21%
24 m -27m --27%
above27m --- 30%
Note: The Centring charges for item No’s.3 & 4 are for both the faces of the
respective numbers. The measurement of centring charges shall be in “Sqm” for
one face only and the centring charges given are for two faces of centring.
9
From 6 to 8 m below GL/m Per meter
From 8 to 10 m below GL/m Per meter
42 Sinking in Hard strata other than rock but in soils like Observed
limestone, gravel, clay under water including, pumping Data
dewatering, hire charges for mechanical equipment etc.,
complete.
43 Rates for OHSRs/ELSRs including fixtures with a staging
of 15 m, without Seismic analysis.
a 500 Kilo litres Per litre 15.17
b 1000 Kilo litres Per litre 12.60
c 1500 Kilo litres Per litre 11.36
d 2000 Kilo litres Per litre 10.60
e 2500 Kilo litres Per litre 9.93
1) The above rates are arrived with base rate of Cement Rs.3882/- per MT & Steel
Rs 31746/- per MT (Bo CE rates for the month of May 2017.)
2) All concrete components shall be designed with M30 Design Mix proportion.
3) For intermediate capacities proportional rates shall be adopted.
4) The foundations shall be designed for Annular Raft Footings.
The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for
SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on
basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by1.0% on
basic rate up to 20 T/Sqm
c) For SBC below 10T/sqm , solid raft shall be provided and for solid raft the rate
shall be increased by 10% on basic rate.
5) For staging less than 15 m, the rate shall be decreased by Rs.0.05 paisa on basic
rate per litre per every Meter decrease in staging.
6) For staging above 15 m, the rate shall be increased by Rs.0.10 paisa on basic rate
per litre per every Meter additional staging.
7) The above rates shall be increased / decreased due to increase/decrease in the
cost of cement by Basic rate x {(Rc-3882)/3882 } x 0.07
Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate.
8) The above rates shall be increased / decreased due to increase/decrease in the
cost of Steel by Basic rate x { (Rs-31746)/31746} x0.2
Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.
9) a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner
surface of the Reservoir including roof.
b)The rate inclusive of 2 coats of weather proof emulsion painting for external
surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material,
Valve chambers etc., for pipe connections including cost of pipes, specials and valves
as per departmental designs and drawings.
10) For tribal/Agency / Rural area, the above rates as arrived up to shall be increased
by 10%.
11) The above rates adopted for a wind pressure up to "250 kg/sqm". For every 100
kg/sqm decrease in wind pressure, the rate shall be decreased by 5%
12)
a) The Basic rate is adopted by considering the design for Seismic forces for Zone- II
only of seismic zones.
(b) The basic rates shall be increased by 15 % for Zone-III of seismic zones.
10
13. The ELSR/OHSR shall be designed with minimum of two rows of columns for
capacities above 500 KL & up to 1000KL.
14. The ELSR/OHSR shall be designed with minimum of three rows of columns for
capacities above 1000KL.
15) The basic rate is inclusive of following Fixtures
i) Pipe connections & Specials with D.I materials
(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided
with D/F DI material.
(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty
confirming to the specification of SoR item No.28
(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,. Shall
be of DI material.
II) The sizes of the verticals for ELSR/OHSR shall be:
a) For 500 KL to 750 Kl ELSRs
Inlet Pipe - 300mm dia.
Out let Pipe - 350mm dia.
DI valves – 2 No’s
Over Flow pipe - 350m dia.
Scour Pipe - 200mm dia.
b) For 800 KL to 1500 Kl ELSRs
Inlet Pipe - 400mm dia.
Out let Pipe - 450mm dia.
DI valves – 2 No’s
Over Flow pipe - 450m dia.
Scour Pipe - 200mm dia.
c) For above 1500 KL to 2500 Kl ELSRs
Inlet Pipe - 400mm dia.
Out let Pipe - 500mm dia.
DI valves – 2 No’s
Over Flow pipe - 500m dia.
Scour Pipe - 200mm dia.
(iii) Manhole Frames & Covers
a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of
0.60mX 0.60m - For Roof & Valve Chambers.
iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top
dome and slab with mosquito/fly proof nets - 4Nos.
v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.
vi) RCC precast ladders of 0.60 m width - 2 Nos.
vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C
hand railing of 1.0 m height – 1 No
viii) The staircase shall be enclosed with brick masonry walls on three sides and
collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.
ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover
slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The
Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm
thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.
x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using
Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of
40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an
interval not more than of 1.00m c/c.
11
xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional
type (1 No)
xii) Lightening Arrestor with all its accessories complete including earthing, with
relevant IS Codes - 1 No.
xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate
of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall
hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above
plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall
be constructed including earth work excavation in all types of soils for plinth beam of
230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The
footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C
(1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size with
VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground level and
height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be
constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-100mmthick.
450X450mm size columns in M20 grade shall be constructed for gate pillars. All the
materials shall be followed as per the standards.
Tie beam shall be provided above the brick work with 230X200mm size, fixed with
MS angular of 25mm X 25mm X 4mm in "Y" shape to height of 0.60m, with embedded
length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauges shall
be stretched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats
i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on
both sides of brick work.
Snowcem paint in two coats shall be provided for both sides of wall. The M.S
ornamental gate as per the approved drawings shall be provided with minimum of
3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged
on four corners of compound wall. If the length of the wall is increased/decreased
Note:-For every 1m increase/decrease in length of compound wall the
increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL
shall be as follows.:
i)500 KL : 0.086%
ii)1000 KL : 0.047%
iii)1500 KL : 0.034%
iv)2000 KL : 0.026%
v)2500 KL : 0.022 %
For intermediate capacities, interpolated percentages shall be adopted.
xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the
following specification: RCC framed structure with concrete grade not less than M20
design mix at the locations specified by the department at the time of execution with
veranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts
excluding balconies and staircases.
MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright
CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond
board doors shall be provided. N.C.L. Windows centre fixed both sides open able
shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section
with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of
12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be
provided. Walls shall be provided with snowcem paint in two coats over primary
coat. Electrical and water supply arrangement shall be provided as directed by dept
officer. Water Storage tank made with plastic/polymer material of reputed make with
necessary out let and inlet connection pipes shall provided. Septic tank for 5 users
shall be provided.
12
44 Rates for OHSRs/ELSRs including fixtures with a
Rs/litre
staging of 10 m without Seismic analysis.
a Up to 10,000 Litres capacity Per litre 48.78
b 15,000 Litres capacity Per litre 33.51
c 20,000 Litres capacity Per litre 32.93
d 40,000 Litres capacity Per litre 29.21
e 60,000 Litres capacity Per litre 22.14
f 1,00,000 Litres capacity Per litre 20.43
g 2,00,000 Litres capacity Per litre 17.85
h 3,00,000 Litres capacity Per litre 16.80
i 4,00,000 Litres capacity Per litre 14.80
j 4,50,000 Litres capacity Per litre 12.79
NOTE: -1). All concrete members shall be designed with M30 grade design mix.
2) For intermediate ranges proportional rates may be adopted
2) The above rates are applicable for Elevated Level Services Reservoirs / OHSRs
with RAFT FOUNDATION and a rate of Rs. 3882/- per tonne for cement and
Rs.31746/- per tonne for steel.
3) For every Meter of staging less than 10 m, the rate shall be reduced by Rs.0.05
paisa per litre per every Meter of difference in staging
4) For every Meter of staging above 10 m , the rate shall be increase by Rs.0.10 paisa
per litre per every Meter of additional in staging
5) The above rates shall be increased / decreased due to increase / decrease in the
cost of cement by
Basic Rate x {(Rc-3882)/3882 } x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate.
6)The above rates shall be increased / decreased due to increase / decrease in the
cost of steel by
Basic Rate x { (Rs-31746)/31746 x0.2
Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
7) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner
surface of the Reservoir including roof.
8) The above rates shall be adopted for estimate purposes for construction of ELSR
for a finished work including 2 coats of whether proof emulsion painting for external
surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections
but excluding cost of pipes, bends and valves as per departmental designs and
drawings.
9) The above rates are applicable for wind pressures up to 250 kg / Sq m .For
decrease in wind pressure the rate has to be decreased by 5% per every 100kg/sqm.
If the ELSR / OHSR are to be designed for seismic forces also, cost shall be arrived by
working out detailed quantities based on the designs.
10) For Tribal/Agency/ Rural area, the above rates shall be increased by 10%
11) If the ELSR is to be designed for seismic forces also, cost shall be arrived by
working out detailed quantities based on the design & difference to be paid extra.
12) If the ELSR is to be designed for seismic forces a) The above rates are applied up
to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be
increased by 15 %.
13) The rate is arrived with the Cement & Steel rates of Rs 3882/MT and Rs 31746/-
approved by the BoCE for the month of May 2017.
13
13) Fixtures include :
a) RCC or Aluminium ladder inside 0.60 m wide.
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL
capacity dog legged staircase shall be provided with staircase flight width of 1.0mts
and landing width of 1.20mts with S.S railing up to 1.0 height.
b) The above rates are applicable with Cement @ rate of Rs.3882/-MT and Steel of
Rs. 31746/MT.
c) The above rates shall be increased / decreased due to increase / decrease in the
cost of cement by
Basic Rate x {(Rc-3882)/3882 } x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate
14
d) The above rates shall be increased / decreased due to increase / decrease in the
cost of steel by
Basic Rate x { (Rs-31746)/31746} x0.2
Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.
e) For Rural areas an extra allowance of 10% shall be given on basic rate
f) For components immersed in water Stain less Steel of Grade 304L shall be used. for
other components 304 Grade steel shall be used.
g) Lab testing equipment of reputed make and consumables for one year. The testing
equipment for conducting all laboratory tests shall be installed & training shall be
imparted to the Municipal staff.
h) The rate is arrived with the Cement & Steel rates of Rs 3882/MT and
Rs31746/- approved by the BoCE for the month of May 2017.
The above rates of Filtration Plants shall include all the following components.
A) Civil Works
(All works of VRCC Shall be in M30 design mix)
1). Stilling Chamber and Aeration cascade
2) Pre settling tank shall be provided for 30 MLD and above capacities of WTP for a
minimum of 1 hr capacity.
3). Raw water channel with Stainless Steel Weir of SS 304 L Grade material and also
with digital flow meters
4) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS
Blades with gear wheel arrangements etc, using 304 L Grade Steel.
15
11) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall
be sufficiently spaced for easy operation & maintenance and inspection, as per
standard norms.
12) The bottom level of the wash water control chamber must be above G.L so as to
dispose the wash water and sludge from Clariflocculator by gravity to disposal point.
Additional specifications
13) Railing for all the components (Clarifloculator, Filter House, Staircase etc,.) shall
be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia.
pipe for top horizotals,25mm dia. for middle row and 40mm dia. verticals spaced at
interval of not more than 1.00m c/c.
14) Inspection / Path ways in filter beds: Middle pathway: Minimum of 1.50m,
Side pathway: Minimum of 1.20m
15) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room,
Laboratory) shall be provided with Non-skid tiles of approved make & quality, as per
standard specifications.
16) The basement of the Filtration plant building shall be minimum of 1.20m above
the existing nearby Road top level.
17) Minimum head room of 2.00m shall be provided, at the alum mixing chambers in
alum store for inspection & maintenance.
18) The minimum width of entrance hall for the Filter House shall be 4.50m, and
Laboratory of min size .of 3.30 X 4.50m.
18) b) For various components of the WTP should be designed by considering the
uplift pressure also.
19) a) High efficient Air Blowers shall be installed to the design requirement with low
noise pollution, environmental pollution as per PCB guide lines & Testing of blowers
as per I.S Standards at site. b) The Piping from Blower to Filter Beds shall be GI
and submerged pipe in water shall be HDPE.
20) UPVC pipes shall be provided for under drain system. Filter pipe manifolds shall
be assembled with HDPE pipes.
21) Alum storage capacity shall be designed for minimum period of 90 days.
Consumables shall be provided for 2115 Running Hours of WTP.
17
2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water &
Clear water flows by installing Digital Flow meters to measure the flows at Raw water
Channel and at each filter bed individually and combined for measuring the
quantities of water treated with a facility to record and store the readings & also to
send messages to the assigned designatories about the variations/ deficiencies in the
flow including alerts for back wash requirements of filter beds, and recovery of data
for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided
of standard approved make. The equipment shall have the following specifications.
Hardware:
i) Wall mounted Sensor House for measuring Raw water & Clear water flow from
Filter bed out lets with accessories consists of
ii) Electrode Type: General type, Scraper type or replaceable type Electrode made
with material of SS external Ultra Touch Sensors as per requirement.
iii) Customised Application Requirement : Sensors with Interface logic control board
with serial interfaces, including accessories such as Add-on port, external DC Power
Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital
Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD
16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication Button
and memory of Data Storage for 30Days , status of Filter Bed Level indicator, Rating,
Reading on LCB Display, Menu Driven Data for sending to Onsite Big Display,
operated with Battery Power of any reputed make or any equalent make.
Software:
The software shall be designed with Web Domain with Data Base Server and Web
Name as per the directions of the Departmental Authorities.
The application of Software for Web design & Desktop shall meet the following
requirements:
i)Onsite Display: Letters with size of 1.5’ seven Segment LED Display with Interface
for each Filter Bed, for Onsite Display, by displaying the Bed Levels, Ratings, Readings
in 3 Columns, for each bed of the plant in successive rows and cumulative results at
the bottom of the screen.
ii) Off Site Display: Letters with size of 1.5’ seven Segment LED Display with Interface
GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total
Cumulative Reading as specified on On-site Display Features.
18
The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed
Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level
Triggering, before & after Bed wash.
The software shall also have the features of sending messages to the mobiles of the
Departmental designatories indicating Bed Low Levels, Power Supply timings, Bed
Wash timings and its status, Power Supply timings and its status Grid View Table,
Motor Working time and its status Grid View Table, all trigger events and schedule
information and including all Snap View Reports, all Daily, Monthly, Yearly Reports,
all Power Working Reports, all Power Events Information etc,.
19
1. S o R FOR R.C.C. PLAIN ENDED PIPES
Sl. No. Description
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to
1 B.I.S 458/2003 , Ex-factory, excluding transportation, taxes & duties
20
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
.
2. S o R FOR R.C.C. COLLARS
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost. Cement. Rs.3,882/-/- per MT Steel (M.S. Rods) - Rs.40,570/- per MT.
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as per
the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease) in cost (Rs. per each) due to change in the cost of M.S.
Rods = (S2-S1)/1000 X Ws. R2= Variation (increase /decrease) in cost (Rs. per each) due
to change in the cost of Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 40,570/- , S2 = Cost of M S Rods (Rs. per MT including all taxes and freight) at the
time of preparation of estimate.
C1 = Rs.3,882/-,
C2 = Cost of Cement (Rs. per MT including all taxes and freight) at the time of preparation of
estimate
Ws = Weight of MS Rods required (Kg.) per each collar.
21
Wc = Weight of Cement required (Kg.) per each collar.
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
3. S o R FOR R.C.C. S/S PIPES (Non - Pressure)
Sl. No. Description
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length)
Excluding transportation, taxes & duties.
Size Unit SoR For 2017-18
NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia. Meter 162
100 mm dia. Meter 184
150 mm dia. Meter 213
200 mm dia. Meter 262
225 mm dia. Meter 284
250 mm dia. Meter 302
300 mm dia. Meter 425 1074 1135
350 mm dia. Meter 548 1313 1335
400 mm dia. Meter 602 1456 1480
450 mm dia. Meter 751 1605 1616
500 mm dia. Meter 867 1836 1997
600 mm dia. Meter 1214 2578 2604
700 mm dia. Meter 1572 3300 3385
800 mm dia. Meter 2026 4374 4404
900 mm dia. Meter 2574 5500 5566
1000 mm dia. Meter 3148 6160 5533
1100 mm dia. Meter 3647 7278 7545
1200 mm dia. Meter 4110 8597 8835
1400 mm dia. Meter 5924 11383 12542
1600 mm dia. Meter 7333 14800 14917
1800 mm dia. Meter 8122 19657 20039
Note: All the prices are ex-works. The above rates of RCC S/S Non-Pressure pipes are based on the
following raw materials cost. Cement. Rs.3,882/- per MT, Steel (M.S. Rods) – Rs.40,570/- per MT.
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be as per the
following formula.
Revised Cost = Cost as per the above table +R1+R2 R1=
Variation (increase / decrease) in cost (Rs. per Meter) due to change in the cost of M.S. Rods = (S2-
S1)/1000 X Ws. R2= Variation
(increase / decrease) in cost (Rs. per Meter) due to change in the cost of Cement = (C2-C1)/1000 X
Wc. S1 = Rs. 40,570/- , S2 =
Cost of M S Rods (Rs. per MT including all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 3,882/- , C2 = Cost of Cement (Rs. per MT including all taxes and freight) at the time of
preparation of estimate Ws=Weight of MS
Rods required (Kg.) per Meter of pipe as per IS: 458/2003.
WC= Weight of Cement required (Kg.) per Meter of pipe.
22
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
4. S o R FOR R.C.C. S/S PIPES (Pressure)
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
23
5. S o R FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES
Sl.
Description
No.
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
1
including transportation but excluding taxes & duties. The Rubber Rings shall be
tested at the factory premises confirming to B.I.S. 5382/1985.
Size Unit SoR For 2017-18
NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia. Each 26
100 mm dia. Each 32
150 mm dia. Each 57
200 mm dia. Each 67
225 mm dia. Each 73
250 mm dia. Each 82
300 mm dia. Each 100 129 129
350 mm dia. Each 116 154 154
400 mm dia. Each 128 175 175
450 mm dia. Each 145 198 198
500 mm dia. Each 189 227 227
600 mm dia. Each 248 329 329
700 mm dia. Each 248 394 394
800 mm dia. Each 428 478 478
900 mm dia. Each 536 646 646
1000 mm dia. Each 627 780 780
1100 mm dia. Each 754 999 999
1200 mm dia. Each 1208 1256 1256
1400 mm dia. Each 1328 1382 1382
1600 mm dia. Each 1654 1686 1686
1800 mm dia. Each 2060 2154 2154
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
2
including transportation but excluding taxes & duties. The Rubber Rings shall be
tested at the factory premises confirming to B.I.S. 5382/1985.
Size P1-Class P2-Class P3-Class
80 mm dia. Each 26 26 26
100 mm dia. Each 32 33 33
150 mm dia. Each 57 57 57
200 mm dia. Each 67 67 67
225 mm dia. Each 73 75 77
250 mm dia. Each 82 85 86
300 mm dia. Each 100 106 110
350 mm dia. Each 116 132 145
400 mm dia. Each 128 175 178
Size
450 mm dia. Each 145 200 205
24
500 mm dia. Each 189 227 237
600 mm dia. Each 248 280 285
700 mm dia. Each 338 370 394
800 mm dia. Each 428 474 474
900 mm dia. Each 536 598
1000 mm dia. Each 627 722
1100 mm dia. Each 754
1200 mm dia. Each 1208
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
.
25
6. S o R FOR CONVEYANCE OF R.C.C. PLAIN ENDED PIPES
Rate up to
5 Kms Rate for
Rate up to 5 Kms Rate for
Lead every
Lead including every
including additional
Sl. No. Description Loading, additional 1
Loading, 1 KM lead
unloading and KM lead or
unloading or part
stacking part thereof.
and thereof.
stacking
Conveyance of R.C.C plain ended pipes on all weathered roads including
1
loading, unloading and stacking (per Meter) SoR for 2017-18
NP - 2 Class NP - 3 Class & NP - 4 Class
80 mm dia. 3.31 0.15
100 mm dia. 4.41 0.15
150 mm dia. 6.62 0.28
200 mm dia. 8.82 0.28
225 mm dia. 9.92 0.44
250 mm dia. 11.03 0.44
300 mm dia. 15.44 0.59 43.00 1.18
350 mm dia. 22.05 1.32 46.31 1.32
400 mm dia. 24.26 1.47 55.13 1.76
450 mm dia. 31.97 1.76 59.54 2.05
500 mm dia. 34.18 2.05 65.05 2.05
600 mm dia. 49.61 3.23 98.12 4.56
700 mm dia. 62.84 4.56 109.15 5.29
800 mm dia. 73.87 4.56 131.20 5.29
900 mm dia. 84.89 4.56 171.99 9.98
1000 mm dia. 125.69 9.39 207.27 9.98
1100 mm dia. 137.81 9.39 224.91 10.86
1200 mm dia. 156.56 9.98 251.37 10.86
1400 mm dia. 188.53 9.98 341.78 11.30
1600 mm dia. 218.30 9.98 410.13 11.30
1800 mm dia. 251.37 9.98 546.84 15.86
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
.
26
7. S o R FOR CONVEYANCE OF R.C.C. S/S PIPES
P2 – Class P3 – Class
27
100 mm dia. 4.41 0.26 4.41 0.26
150 mm dia. 7.72 0.26 7.72 0.26
200 mm dia. 9.92 0.53 13.23 1.20
225 mm dia. 13.23 1.20 15.44 1.33
250 mm dia. 14.33 1.33 18.74 1.47
300 mm dia. 27.56 1.60 31.97 1.73
350 mm dia. 34.18 1.86 44.10 2.01
400 mm dia. 40.79 2.01 58.43 3.48
450 mm dia. 51.82 3.34 72.77 3.48
500 mm dia. 58.43 3.48 88.20 5.21
600 mm dia. 77.18 3.48 127.89 6.67
700 mm dia. 115.76 7.07 186.32 10.54
800 mm dia. 153.25 10.01 238.14 10.54
900 mm dia. 186.32 10.54
1000 mm dia. 229.32 10.80
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
28
8. S o R FOR A.C. PIPES
Sl. No Description
1 2
Manufacture, Supply of A.C. Pressure pipes (Mazza process) as per BIS No: 1592/2003 as
amended from time to time duly marked with BIS mark, including cost of material,
1 incidental handling, loading and packing charges , but exclusive of transportation, unloading,
stacking at departmental stores, and excluding taxes and other Govt. Levies. The pipes shall
be tested at factory premises confirming to IS Code 1592/2003.
Size Unit SoR For 2017-18
Class - 15 Class - 20 Class - 25
80 mm dia. Rate/Meter 192 209 262
100 mm dia. Rate/Meter 253 321 394
125 mm dia. Rate/Meter 330 411 515
150 mm dia. Rate/Meter 464 577 725
200 mm dia. Rate/Meter 770 983 1248
250 mm dia. Rate/Meter 977 1264 1582
300 mm dia. Rate/Meter 1367 1777 2269
350 mm dia. Rate/Meter 1666 2165 2728
400 mm dia. Rate/Meter 2167 2831 3514
450 mm dia. Rate/Meter 2567 3405 4264
500 mm dia. Rate/Meter 3173 4166 5232
600 mm dia. Rate/Meter 4510 5886 7501
700 mm dia. Rate/Meter 5980 8111 10488
750 mm dia. Rate/Meter 6814 9362 12002
800 mm dia. Rate/Meter 7798 10608 13614
850 mm dia. Rate/Meter 8746 11935 15331
900 mm dia. Rate/Meter 9750 13332 17149
1000 mm dia. Rate/Meter 12036 16369 21088
2 Lowering, laying and jointing of AC pressure pipes with AC couplings or CID joints
complete with Rubber rings in readymade trenches true to alignment and gradient including
filling with water lead up to 500 mts and testing to required pressure including all sundries
but excluding cost of jointing materials and conveyance from source of supply as per BIS No.
6530/1972
80 mm dia. Rate/Meter 46 46 46
100 mm dia. Rate/Meter 67 67 67
125 mm dia. Rate/Meter 74 74 74
150 mm dia. Rate/Meter 88 88 88
200 mm dia. Rate/Meter 116 116 116
250 mm dia. Rate/Meter 139 139 139
300 mm dia. Rate/Meter 171 171 171
350 mm dia. Rate/Meter 289 289 289
400 mm dia. Rate/Meter 436 436 436
450 mm dia. Rate/Meter 530 530 530
500 mm dia. Rate/Meter 673 673 673
600 mm dia. Rate/Meter 724 724 724
700 mm dia. Rate/Meter 807 807 807
29
750 mm dia. Rate/Meter 898 898 898
800 mm dia. Rate/Meter 945 945 945
850 mm dia. Rate/Meter 1009 1009 1009
900 mm dia. Rate/Meter 1100 1100 1100
1000 mm dia. Rate/Meter 1133 1133 1133
1. The above rates of AC Pipes are based on the Cement cost of RS 3,882/- per MT
(excluding all taxes and including freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 78,500/- per M.T (Excluding
all taxes & Freight)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kg’s/Rmt
IC = Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be
increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kg’s/Rmt
IF = Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
Transportation of AC pressure pipes at site of work anywhere in Andhra 5% on the basic
Pradesh on motor able roads for full truck loads including transit cost of
insurance, unloading, and stacking at site of work etc. Complete (AC corresponding
Couplings and Rubber rings are to be supplied free of transportation AC Pressure
charges). pipes.
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
30
9. S o R FOR A.C. COUPLINGS
Sl.
Description
No.
Manufacture, Supply of A.C Couplings suitable to A.C. Pressure pipes (Mazza process)
as per BIS: 1592/2003 excluding cost of rubber rings to suit AC pressure pipes
1 including cost of material, incidental handling, packing, transportation and unloading at
site transit risk, but taxes and other govt. Levies and testing of joints as per IS Code.
Size Unit SoR For 2017-18
Class - 15 Class - 20 Class – 25
80 mm dia. Rate/Each 93 101 115
100 mm dia. Rate/Each 121 130 156
125 mm dia. Rate/Each 152 167 200
150 mm dia. Rate/Each 177 221 273
200 mm dia. Rate/Each 326 354 451
250 mm dia. Rate/Each 380 478 609
300 mm dia. Rate/Each 495 641 825
350 mm dia. Rate/Each 643 830 1060
400 mm dia. Rate/Each 990 1292 1657
450 mm dia. Rate/Each 1185 1564 2009
500 mm dia. Rate/Each 1414 1892 2417
600 mm dia. Rate/Each 1728 2166 2769
700 mm dia. Rate/Each 2289 3081 4007
750 mm dia. Rate/Each 2582 3530 4557
800 mm dia. Rate/Each 2929 3972 5140
850 mm dia. Rate/Each 3264 4443 5761
900 mm dia. Rate/Each 3611 4939 6412
1000 mm dia. Rate/Each 4407 6005 7826
1. The above rates of AC Coupling are based on the Cement cost of RS 3,882/- per MT (excluding all
taxes and including freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 78,500/- per M.T (excluding all
taxes & Fright)
For any Increase/ Decrease in the rate of cement, the price of AC Coupling per Each shall be increased
/decreased as under.
W x 0.85 x IC Where W = Weight of Coupling in Kgs/each
IC = Increase/Decrease in cost of cement/kg
For any increase/decrease in the rate of fiber, the price of AC Coupling per each shall be
increased/Decreased as under:
W x 0.15 X IF Where: W=: Weight of Coupling in Kgs/Each
IF = Increase /Decrease in cost of fiber/kg
The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
31
10. S o R FOR RUBBER RINGS TO SUIT A.C. COUPLINGS
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated Contract
Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the
estimate.
.
32
11. S o R FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR 2017-18
Sl. No. Description
Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding
1 transportation, taxes & duties, For the following Field/Site Test Pressures.
(The manufacture shall design the pipes as per the IS Code 784-2001)
Size Unit SoR for 2017-18.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2
350 MM DIA. Meter 2455 2463 2473 2481 2531 2619
400 MM DIA. Meter 2634 2653 2681 2711 2759 2798
450 MM DIA. Meter 2759 2779 2808 2858 2932 2994
500 MM DIA. Meter 2995 3005 3025 3084 3146 3240
600 MM DIA. Meter 3433 3454 3483 3587 3701 3811
700 MM DIA. Meter 3902 3958 4075 4199 4325 4517
800 MM DIA. Meter 4730 4854 4970 5143 5307 5634
900 MM DIA. Meter 5436 5600 5754 6016 6239 6735
1000 MM DIA. Meter 6417 6620 6832 7043 7274 7878
1100 MM DIA. Meter 7218 7439 7700 7959 8210 8949
1200 MM DIA. Meter 8107 8426 8715 8904 9542 10351
1300 MM DIA. Meter 9232 9579 9926 10263 11298 11712
1400 MM DIA. Meter 10737 11152 11557 12240 13021 13642
1500 MM DIA. Meter 12156 12639 13092 14321 14753 16612
1600 MM DIA. Meter 13692 14213 14732 16180 16733 18500
1700 MM DIA. Meter 14766 15366 15964 17480 19477 20343
1800 MM DIA. Meter 16325 17372 18270 20082 20997 23243
1900 MM DIA. Meter 17454 18415 19980 21134 22985 25320
2000 MM DIA. Meter 19160 20365 21373 23486 26462 27526
Cost of laying jointing, testing to hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and emptying
2
pipe line after completion of field testing etc.
350 MM DIA. Meter 251 251 251 251 251 251
33
400 MM DIA. Meter 271 271 271 271 271 271
450 MM DIA. Meter 314 314 314 314 314 314
500 MM DIA. Meter 333 333 333 333 333 333
600 MM DIA. Meter 409 409 409 409 409 409
700 MM DIA. Meter 481 481 481 481 481 481
800 MM DIA. Meter 543 543 543 543 543 543
900 MM DIA. Meter 595 595 595 595 595 595
1000 MM IA Meter 688 688 688 688 688 688
1100 MM IA Meter 772 772 772 772 772 772
1200 MMDIA. Meter 856 856 856 856 856 856
1300 MM DIA. Meter 970 970 970 970 970 970
1400 MM DIA. Meter 1097 1097 1097 1097 1097 1097
1500 MM DIA. Meter 1190 1190 1190 1190 1190 1190
1600 MM DIA. Meter 1333 1333 1333 1333 1333 1333
1700 MM DIA. Meter 1451 1451 1451 1451 1451 1451
1800 MM DIA. Meter 1536 1536 1536 1536 1536 1536
1900 MM DIA. Meter 1621 1621 1621 1621 1621 1621
2000 MM DIA. Meter 1707 1707 1707 1707 1707 1707
Conveyance of pre-stressed (Non-cylinder) concrete pipes and accessories including loading at factory, un-loading at site and stacking for
3
the following sizes.(minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
350 MM DIA. Per K.M/M 1.37 1.37 1.37 1.37 1.37 1.37
400 MM DIA. Per K.M/M 1.37 1.37 1.37 1.37 1.37 1.37
450 MM DIA. Per K.M/M 1.68 1.68 1.68 1.68 1.68 1.68
500 MM DIA. Per K.M/M 1.79 1.79 1.79 1.79 1.79 1.79
600 MM DIA. Per K.M/M 2.00 2.00 2.00 2.00 2.00 2.00
700 MM DIA. Per K.M/M 3.26 3.26 3.26 3.26 3.26 3.26
800 MM DIA. Per K.M/M 3.26 3.26 3.26 3.26 3.26 3.26
34
900 MM DIA. Per K.M/M 3.26 3.26 3.26 3.26 3.26 3.26
1000 MM DIA. Per K.M/M 5.25 5.25 5.25 5.25 5.25 5.25
1100 MM DIA. Per K.M/M 5.25 5.25 5.25 5.25 5.25 5.25
1200 MM DIA. Per K.M/M 10.08 10.08 10.08 10.08 10.08 10.08
1300 MM DIA. Per K.M/M 10.19 10.19 10.19 10.19 10.19 10.19
1400 MM DIA. Per K.M/M 10.19 10.19 10.19 10.19 10.19 10.19
1500 MM DIA. Per K.M/M 10.19 10.19 10.19 10.19 10.19 10.19
1600 MM DIA. Per K.M/M 11.45 11.45 11.45 11.45 11.45 11.45
1700 MM DIA. Per K.M/M 11.45 11.45 11.45 11.45 11.45 11.45
1800 MM DIA. Per K.M/M 11.66 11.66 11.66 11.66 11.66 11.66
1900 MM DIA. Per K.M/M 12.18 12.18 12.18 12.18 12.18 12.18
2000 MM DIA. Per K.M/M 12.18 12.18 12.18 12.18 12.18 12.18
Cost of Machine End pair (Socket +Spigot) for providing M.S Specials on PSC pipelines excluding cost of M.S Special including cost and
4
conveyance to site etc., complete.
350 MM DIA. Per Pair 11000 11000 11000 11000 11000 11000
400 MM DIA. Per Pair 12600 12600 12600 12600 12600 12600
450 MM DIA. Per Pair 14200 14200 14200 14200 14200 14200
500 MM DIA. Per Pair 15870 15870 15870 15870 15870 15870
600 MM DIA. Per Pair 19000 19000 19000 19000 19000 19000
700 MM DIA. Per Pair 22283 22283 22283 22283 22283 22283
800 MM DIA. Per Pair 25500 25500 25500 25500 25500 25500
900 MM DIA. Per Pair 28760 28760 28760 28760 28760 28760
1000 MM DIA. Per Pair 31700 31700 31700 31700 31700 31700
1100 MM DIA. Per Pair 34979 34979 34979 34979 34979 34979
35
1200 MM DIA. Per Pair 38200 38200 38200 38200 38200 38200
1300 MM DIA. Per Pair 41198 41198 41198 41198 41198 41198
1400 MM DIA. Per Pair 48582 48582 48582 48582 48582 48582
1500 MM DIA. Per Pair 57000 57000 57000 57000 57000 57000
1600 MM DIA. Per Pair 63481 63481 63481 63481 63481 63481
1700 MM DIA. Per Pair 71200 71200 71200 71200 71200 71200
1800 MM DIA. Per Pair 81400 81400 81400 81400 81400 81400
1900 MM DIA. Per Pair 94100 94100 94100 94100 94100 94100
2000 MM DIA. Per Pair 113200 113200 113200 113200 113200 113200
Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to is:7322-1985 and flange
5
dimensions confirming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site, vat etc., complete.
Dia. meter and thickness Unit Rate Dia.meter and thickness Unit Rate
80 mm dia. x 15 mm thick Each Flange 740 50 500mm dia.x 20 mm thick Each Flange 7530
100 mm dia. x 15 mm thick Each Flange 1016 600 mm dia.x 20 mm thick Each Flange 9479
125 mm dia. x 15 mm thick Each Flange 1220 700 mm dia.x 25 mm thick Each Flange 13407
150 mm dia. x 15 mm thick Each Flange 1625 750 mm dia.x 25 mm thick Each Flange 14760
200 mm dia. x 15 mm thick Each Flange 2030 800 mm dia.x 25 mm thick Each Flange 16520
250 mm dia. x 15 mm thick Each Flange 2640 900 mm dia.x 25 mm thick Each Flange 18959
300 mm dia. x 15 mm thick Each Flange 2990 1000 mm dia.x 25 mm thick Each Flange 22340
350 mm dia. x 18 mm thick Each Flange 4360 1050 mm dia.x 25 mm thick Each Flange 23670
400 mm dia. x 18 mm thick Each Flange 5440 1100 mm dia.x 25 mm thick Each Flange 25590
450 mm dia. x 18 mm thick Each Flange 6324 1200 mm dia.x 32 mm thick Each Flange 33990
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.49,913/-MT (excluding taxes & including freight), and cement price of Rs 3,882/- per
MT
The rates may be revised depending upon the increase/decrease in the cost of HT wire and Cement. as per the following method.
36
The cost of HT wire may be obtained from reputed firms like SAIL/TATA/ SS Ltd. etc.,
Revised Cost =Cost as per the above table +R1+R2.
R1= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of HT Wire = (H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of Cement = (C2-C1)/1000 X Wc.
H1 = Rs. 49,913/- H2 = Cost of HT Wire (Rs. per MT including all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 3,882/- C2 = Cost of Cement (Rs. per MT including all taxes and freight) at the time of preparation of estimate
Wh =Weight of HT Wire required (Kg.) per meter of pipe. Wc= Weight of Cement required (Kg.) per meter of pipe.
The rates for MS flanges are considering landed price of MS Plates of Rs.44, 500/- per MT. Price variation to be released on actual weight of flange.
Note: 1) The above formula for calculation of revised cost to be used for preparation of Estimates only.
2) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during preparation of estimates, the 12% GST rate towards works
contract is applied on the Estimated Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the estimate.
.
37
12. S o R FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES FOR THE YEAR 2017-18
S.
Description
No.
Pre-stressed (Cylinder type ) concrete pipes conforming to IS 784/2001 @ ex-factory cost of pipes, excluding transportation, laying, jointing,
1 testing, bends, tees, specials, taxes & duties for the following Field/Site Test Pressures.(The manufacture shall design the pipes as per the IS Code
784-2001)
Size Unit SoR For 2014-15
8 10 12 14 16 18 20
4 Kg/cm2 6 Kg/cm2
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
400 MM DIA. Meter 4728 4728 4728 4748 4797 4825 4881 4919 4955
450 MM DIA. Meter 5046 5046 5006 5104 5142 5199 5265 5311 5348
500 MM DIA. Meter 5364 5364 5413 5469 5517 5573 5650 5714 5770
600 MM DIA. Meter 6152 6230 6295 6361 6427 6492 6604 6698 6752
700 MM DIA. Meter 7002 7097 7181 7274 7358 7452 7605 7705 7828
800 MM DIA. Meter 8241 8345 8456 8568 8679 8802 8972 9122 9259
900 MM DIA. Meter 9368 9509 9658 9798 9947 10098 10514 10709 10946
1000 MM DIA. Meter 11263 11441 11618 11795 11982 12160 12714 12977 13250
1100 MM DIA. Meter 12502 12718 12932 13146 13370 13596 14267 14558 14876
1200 MM DIA. Meter 13901 14153 14414 14674 14936 15198 16007 16355 16715
1300 MM DIA. Meter 15208 15878 16186 16493 16801 17421 18040 18506 19001
1400 MM DIA. Meter 17438 17823 18217 18651 19456 19925 20674 20865 21687
1500 MM DIA. Meter 20549 20960 21371 21781 22571 23028 23627 24546 25059
1600 MM DIA. Meter 23380 23847 24313 25169 25692 26283 27288 27865 28454
1700 MM DIA. Meter 25097 25628 26158 27136 27712 28962 29597 30262 30928
1800 MM DIA. Meter 29717 30305 31334 31984 32644 34042 34752 35495 36238
1900 MM DIA. Meter 31886 32549 33699 34440 35938 36750 40146 41077 42010
2000 MM DIA.
Meter 33648 34861 35672 36482 38126 39042 39913 40833 41760
38
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene dia.pher cloth, cost of
2 transportation of water and emptying pipe line after completion of field testing etc.
400 MM DIA. Meter 528 528 528 528 528 528 528 528 528
450 MM DIA. Meter 622 622 622 622 622 622 622 622 622
500 MM DIA. Meter 677 677 677 677 677 677 677 677 677
600 MM DIA. Meter 792 792 792 792 792 792 792 792 792
700 MM DIA. Meter 903 903 903 903 903 903 903 903 903
800 MM DIA. Meter 1036 1036 1036 1036 1036 1036 1036 1036 1036
900 MM DIA. Meter 1167 1167 1167 1167 1167 1167 1167 1167 1167
1000 MM DIA. Meter 1279 1279 1279 1279 1279 1279 1279 1279 1279
1100 MM DIA. Meter 1450 1450 1450 1450 1450 1450 1450 1450 1450
1200 MM DIA. Meter 1582 1582 1582 1582 1582 1582 1582 1582 1582
1300 MM DIA. Meter 1694 1694 1694 1694 1694 1694 1694 1694 1694
1400 MM DIA. Meter 1865 1865 1865 1865 1865 1865 1865 1865 1865
1500 MM DIA. Meter 2069 2069 2069 2069 2069 2069 2069 2069 2069
1600 MM DIA. Meter 2240 2240 2240 2240 2240 2240 2240 2240 2240
1700 MM DIA. Meter 2522 2522 2522 2522 2522 2522 2522 2522 2522
1800 MM DIA. Meter 2674 2674 2674 2674 2674 2674 2674 2674 2674
1900 MM DIA. Meter 2916 2916 2916 2916 2916 2916 2916 2916 2916
2000 MM DIA. Meter 3105 3105 3105 3105 3105 3105 3105 3105 3105
Conveyance of Pre-stressed (Cylinder type) concrete pipes and accessories including loading at factory, un-loading at site and stacking for the
3 following sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
Per
400 MM DIA. 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16
KM/M
Per
450 MM DIA. 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16
KM/M
Per
500 MM DIA. 1.68 1.68 1.68 1.68 1.68 1.68 1.68 1.68 1.68
KM/M
39
Per
600 MM DIA. 1.89 1.89 1.89 1.89 1.89 1.89 1.89 1.89 1.89
KM/M
700 MM DIA. Per
3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05
KM/M
800 MM DIA. Per
3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05
KM/M
900 MM DIA. Per
3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05
KM/M
1000 MM DIA. Per
4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83
KM/M
1100 MM DIA. Per
4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83
KM/M
1200 MM DIA. Per
9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45
KM/M
1300 MM DIA. Per
9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45
KM/M
1400 MM DIA. Per
9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45
KM/M
1500 MM DIA. Per
9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45
KM/M
1600 MM DIA. Per
9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45 9.45
KM/M
1700 MM DIA. Per
11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45
KM/M
1800 MM DIA. Per
11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45
KM/M
1900 MM DIA. Per
11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45 11.45
KM/M
2000 MM DIA. Per
12.08 12.08 12.08 12.08 12.08 12.08 12.08 12.08 12.08
KM/M
Note: The rates of PCCP pipes which were incorporated in the SSR are based on the following raw materials cost.
40
HT Wire: - Rs.50,663/- (excluding all taxes & including freight)
HR Coil (Hot Rolled): - Rs.49,913/- (excluding all taxes & including freight)
Cement Cost Rs. 3,882/-per MT (excluding all duties, taxes & including freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of HT Wire = (H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of HR Coil = (R2-R1)/1000 X Wr.
R3= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of Cement = (C2-C1)/1000 X Wc .
H1 = Rs. 49,913/- H2 = Cost of HT Wire (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate.
R1 = Rs. 44,980/- R2 = Cost of HR Coil (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate.
C1 = Rs. 3,882/- C2 = Cost of Cement (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate
Wh = Weight of HT Wire required (Kg.) per Meter of pipe. Wc = Weight of Cement required (Kg.) per Meter of pipe.
Wr = Weight of HR Coil required (kg) per Meter of pipe.
Note: 1) The above formula for calculation of revised cost to be used for preparation of Estimates only.
2) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during preparation of estimates, the 12% GST rate towards works
contract is applied on the Estimated Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B of the estimate.
41
Public Health Items
13. S o R FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2017-18
S. No. Description
Bar Wrapped Steel Cylindrical (BWSC) pipes conforming to IS 15155 - 2002, ex-factory excluding transportation, taxes and duties etc., for bar wrapped
1
steel cylindrical pipes for the following Field/Site Test Pressures. (The manufacture shall design the pipes as per the IS Code 784-2001)
4 -12 28 30
Size Unit 14 Kg/cm2 16 Kg/cm2 18 Kg/cm2 20 Kg/cm2 22 Kg/cm2 24 Kg/cm2 26 Kg/cm2
Kg/cm2 Kg/cm2 Kg/cm2
250 MM 2370 2370 2370 2370 2370 2370 2629 2706 2802 2872
Meter
DIA.
300 MM 2645 2645 2645 2645 2645 2750 3145 3251 3365 3485
Meter
DIA.
350 MM 3530 3530 3600 3798 3992 4174 4358 4552 4796 4976
Meter
DIA.
400 MM 3865 3964 3999 4252 4488 4742 4788 5278 5553 5768
Meter
DIA.
450 MM 3835 3931 3952 4202 4432 4682 4712 5206 5456 5696
Meter
DIA.
500 MM 4258 4262 4514 4801 5114 5413 5750 6417 6785 7213
Meter
DIA.
600 MM 5269 5605 6026 6429 6861 7315 7884 8368 8827 9337
Meter
DIA.
700 MM 6414 6959 7514 8071 8767 9429 10032 10937 11501 12091
Meter
DIA.
800 MM 7738 8417 9137 10010 11002 11787 12783 13598 14408 15348
Meter
DIA.
900 MM 9345 10203 11096 12066 13186 14371 15399 16395 17613 19003
Meter
DIA.
1000 MM 11088 12155 13374 14693 15840 17171 18356 19814 21533 22903
Meter
DIA.
1100 MM 14584 14872 16195 17660 19377 20606 22494 23954 25810 27710
Meter
DIA.
1200 MM 15895 16913 18514 20170 21865 23855 26140 28359 30384 32324
Meter
DIA.
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene dia. per cloth, cost of
2
transportation of water and emptying pipe line after completion of field testing.
42
Public Health Items
250 MM 360 360 360 360 360 360 360 360 360 360
Meter
DIA.
300 MM 424 424 424 424 424 424 424 424 424 424
Meter
DIA.
350 MM 502 502 502 502 502 502 502 502 502 502
Meter
DIA.
400 MM 560 560 560 560 560 560 560 560 560 560
Meter
DIA.
450 MM 560 560 560 560 560 560 560 560 560 560
Meter
DIA.
500 MM 702 702 702 702 702 702 702 702 702 702
Meter
DIA.
600 MM 862 862 862 862 862 862 862 862 862 862
Meter
DIA.
700 MM 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005
Meter
DIA.
800 MM 1143 1143 1143 1143 1143 1143 1143 1143 1143 1143
Meter
DIA.
900 MM 1344 1344 1344 1344 1344 1344 1344 1344 1344 1344
Meter
DIA.
1000 MM 1485 1485 1485 1485 1485 1485 1485 1485 1485 1485
Meter
DIA.
1100 MM 1746 1746 1746 1746 1746 1746 1746 1746 1746 1746
Meter
DIA.
1200 MM 1954 1954 1954 1954 1954 1954 1954 1954 1954 1954
Meter
DIA.
Conveyance of Bar Wrapped Steel Cylindrical (BWSC) pipes and accessories including loading at factory, un-loading at site and stacking for the
3 following sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
250 MM Per 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63
DIA. KM/M
300 MM Per 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63
DIA. KM/M
350 MM Per 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84
DIA. KM/M
43
Public Health Items
400 MM Per 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05
DIA. KM/M
450 MM Per 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37
DIA. KM/M
500 MM Per 1.68 1.68 1.68 1.68 1.68 1.68 1.68 1.68 1.68 1.68
DIA. KM/M
600 MM Per 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79
DIA. KM/M
700 MM Per 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00
DIA. KM/M
800 MM Per 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63
DIA. KM/M
900 MM Per 2.84 2.84 2.84 2.84 2.84 2.84 2.84 2.84 2.84 2.84
DIA. KM/M
1000 MM Per 3.26 3.26 3.26 3.26 3.26 3.26 3.26 3.26 3.26 3.26
DIA. KM/M
1100 MM Per 7.28 7.28 7.28 7.28 7.28 7.28 7.28 7.28 7.28 7.28
DIA. KM/M
1200 MM Per 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16
DIA. KM/M
Note: The above rates of BWSC pipes are based on the following raw materials' cost.
HR Plates - Rs.44980/- per MT Wire rods - Rs.49,913/- per MT
Cement Cost Rs. 3,882/-.per MT
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost = Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of HR Plate = (H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of wire rods = (W2-W1)/1000 X Ww.
R3= Variation (increase / decrease) in cost (Rs. per meter) due to change in the cost of Cement = (C2-C1)/1000 X Wc
H1 = Rs. 44,980 H2 = Cost of HR Plate (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate.
W1 = Rs. 49,913/- W2 = Cost of Wire rods (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate.
C1 = Rs. 3,882/- C2 = Cost of Cement (Rs. per MT excluding all taxes and including freight) at the time of preparation of estimate
Wh =Weight of HR Plate required (Kg.) per meter of pipe. Wc= Weight of Cement required (Kg.) per Meter of pipe.
Ww = Weight of wire rods required (kg) per meter of pipe.
44
Public Health Items
Note: 1) The above formula for calculation of revised cost to be used for preparation of Estimates only.
2) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during preparation of estimates, the 12% GST rate
towards works contract is applied on the Estimated Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in
Part-B of the estimate.
.
45
Public Health Engineering Items
Thickness
Sl. No. Description Unit Rate
in mm
1 Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:
3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of
6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3)
30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm
including cost of all materials, labor charges, transportation to anywhere in AP, but
excluding taxes & duties, etc.
500 mm dia. Meter 8.00 8033
46
Public Health Engineering Items
47
Public Health Engineering Items
48
Public Health Engineering Items
49
Public Health Engineering Items
50
Public Health Engineering Items
51
Public Health Engineering Items
2 Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding,
Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line
After Completion Of Field Testing
400 MM DIA. Meter 620
500 MM DIA. Meter 772
600 MM DIA. Meter 949
700 MM DIA. Meter 1102
800 MM DIA. Meter 1257
900 MM DIA. Meter 1478
1000 MM DIA. Meter 1632
1100 MM DIA. Meter 1920
1200 MM DIA. Meter 2151
1300 MM DIA. Meter 2472
1400 MM DIA. Meter 2845
1500 MM DIA. Meter 3218
1600 MM DIA. Meter 3392
1700 MM DIA. Meter 3587
1800 MM DIA. Meter 4057
1900 MM DIA. Meter 4728
2000 MM DIA. Meter 5937
2100 MM DIA. Meter 6793
2200 MM DIA. Meter 7630
2300 MM DIA. Meter 9308
2400 MM DIA. Meter 11383
2500 MM DIA. Meter 13220
2600 MM DIA. Meter 14882
The above rates of MS Spiral pipes are based on the following raw materials cost.
MS Plates = Rs 37,250/- Per MT excluding taxes.
The rates may be revised depending upon the increase/decrease in the cost of raw materials
(landed price) as per the following method.
Revised Cost = Cost of the pipe as per the above table + R1
R1 = (M2-M1)/1000 x Wm
M1 = Rs 37,250/-
M2 = Cost of MS Plates at the time of preparation of estimate including all taxes and freight
Wm =Weight of MS Plates in Kg’s per meter of pipe
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
52
Public Health Engineering Items
15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2017-18. (PE - 80 Grade)
53
Public Health Engineering Items
.
16. S o R FOR H.D.P.E PIPES FOR THE YEAR 2017-18. (PE - 100 Grades)
OD 25 mm 38
OD 32 mm 40 44 61
OD 40 mm 51 60 68 94
OD 50 mm 62 76 93 106 145
54
Public Health Engineering Items
OD 1000 mm 21620
Note:-
Reliance Industries Resin cost adopted for the above rates are
For PE - 100 grade Rs.97, 900/- per MT. (Excluding taxes)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
Price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter excluding taxes
P1 = Existing pipe price in Rs. per Meter excluding taxes
A2 = Revised price of raw material Rs. per MT excluding taxes
A1 = Existing price of raw material Rs. per MT excluding taxes
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
55
Public Health Engineering Items
17. HDPE PIPES – (PE –100 Grade) SEWER LINES FOR THE YEAR 2017-18
Note:-
Reliance Industries Resin cost adopted for the above rates are
For PE - 100 grade Rs.97, 900/- per MT. (Excluding taxes)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
Price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
56
Public Health Engineering Items
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note: - The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
57
Public Health Engineering Items
18. S o R FOR H.D.P.E- (PE –100 Grade) FITTINGS FOR THE YEAR 2017-18.
Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming
I to IS 4984 - 1995 including transportation to anywhere in A.P excluding taxes
and specials etc., complete
I (a) PIPE ENDS LONG NECK Rate per Each
OD 50 mm 69
OD 63 mm 87
OD 75 mm 105
OD 90 mm 145
OD 110 mm 201
OD 125 mm 362
OD 140 mm 339
OD 160 mm 473
OD 180 mm 721
OD 200 mm 927
OD 225 mm 1065
OD 250 mm 1247
OD 280 mm 1393
OD 315 mm 1606
OD 355 mm 3358
OD 400 mm 4475
OD 450 mm 7445
OD 500 mm 8286
(b) MS FLANGES Rate per Each
OD 50 mm 84
OD 63 mm 106
OD 75 mm 135
OD 90 mm 145
OD 110 mm 153
OD 125 mm 210
OD 140 mm 227
OD 160 mm 299
OD 180 mm 421
OD 200 mm 546
OD 225 mm 684
OD 250 mm 807
OD 280 mm 915
OD 315 mm 1076
OD 355 mm 1822
OD 400 mm 2260
OD 450 mm 2950
OD 500 mm 3378
(c) END CAPS Rate per Each
OD 50 mm 50
58
Public Health Engineering Items
OD 63 mm 60
OD 75 mm 75
OD 90 mm 100
OD 110 mm 114
OD 125 mm 158
OD 140 mm 184
OD 160 mm 282
OD 180 mm 457
OD 200 mm 500
OD 225 mm 521
OD 250 mm 741
OD 280 mm 759
OD 315 mm 1037
OD 355 mm 1601
OD 400 mm 2796
OD 450 mm 4496
OD 500 mm 8286
(d) REDUCERS Rate per Each
OD 50 mm x 63 mm 69
OD 63 mm x 75 mm 100
OD 75 mm x 90 mm 164
OD 90 mm x 110 mm 226
OD 110 mm x 125 mm 345
OD 125 mm x 140 mm 478
OD 140 mm x 160 mm 667
OD 160 mm x 180 mm 923
OD 180 mm x 200 mm 1192
OD 200 mm x 225 mm 1464
OD 225 mm x 250 mm 1995
OD 250 mm x 280 mm 2834
OD 280 mm x 315 mm 4007
OD 315 mm x 355 mm 4596
OD 355 mm x 400 mm 6484
OD 400 mm x 450 mm 6727
OD 450 mm x 500 mm 8625
59
Public Health Engineering Items
OD 160 mm 1370
OD 180 mm 1858
OD 200 mm 2559
OD 225 mm 3633
OD 250 mm 4974
OD 280 mm 6965
OD 315 mm 9926
OD 355 mm 14155
OD 400 mm 20733
OD 450 mm 29450
OD 500 mm 40446
BENDS
(f)
Rate per Each
OD 50 mm 60
OD 63 mm 134
OD 75 mm 175
OD 90 mm 298
OD 110 mm 393
OD 125 mm 580
OD 140 mm 764
OD 160 mm 1140
OD 180 mm 1636
OD 200 mm 2216
OD 225 mm 3144
OD 250 mm 4309
OD 280 mm 6213
OD 315 mm 8593
OD 355 mm 11911
OD 400 mm 17968
OD 450 mm 26414
OD 500 mm 35810
II Providing and Fixing electro Fusion Ferrule Tapping saddle manufactured from
virgin resin of PE-80/PE-100 having blue/black color using food grade
compounded raw material with quality assurance certificate from quality
agencies like CIPET etc. For usage in drinking water system and having working
pressure of 10 bar. The cost shall include testing of all materials, labor all taxes
(central & state), inspection charges, transportation up to site, transit insurance,
loading, unloading, stacking, providing and fixing etc. Complete as specified and
directed by the Departmental Engineers.
60
Public Health Engineering Items
Inches)
63x1/2” 967
63 x3/4” 967
63 x1” 967
63 x1/2” 967
75 x1/2” 967
75 x3/4” 967
75 x1 967
90 x1/2” 967
90 x3/4” 967
90 x1” 967
90 x 1 1/4” 1254
90 x 1 1/2” 1254
90 x2” 1254
110x1/2” 967
110 x3/4” 967
110 x1” 967
110 x 1 1/4” 1254
110x1 1/2” 1254
110x2” 1254
160 x1/2” 967
160 x3/4” 967
160 x1” 967
160 x 1 1/4” 1371
160 x 1 1/2” 1371
160 x 2” 1371
200 x 1/2” 1371
200 x 3/4” 1371
200 x 1” 1371
200 x 1 1/4” 1973
200 x 2” 1973
250 x 1/2” 1390
250 x3/4” 1390
250 x1” 1390
250 x 1 1/4” 2009
250 x1 1/2” 2009
250 x 2” 2009
315 x 1/2” 1655
315 x3/4” 1655
61
Public Health Engineering Items
315x1” 1655
315x1 1/4” 2248
315x1 1/2” 2248
315x2” 2248
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
62
Public Health Engineering Items
DIA. IN MM Rate/Meter
20 16
25 24
32 36
40 34 55
50 51 86
63 56 81 122
75 82 112 177
90 113 161 251
110 163 233 374
125 213 297 489
140 266 383 607
160 350 496 795
180 446 640 1018
200 543 778 1240
225 727 1050 1670
250 842 1284 2025
280 1103 1622 2564
315 1396 2039 3237
355 1828 2654
400 2305 3376
Note:
The resin cost adopted for the above rates is Rs.78, 590/- per MT (Basic rate, excluding taxes)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed
subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Meter, P1 = Existing pipe price in Rs. Per Meter
A2 = Revised price of raw material Rs. Per MT, A1 = Existing price of raw material Rs. Per MT
M = Weight of pipe in Kgs per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates only.
63
Public Health Engineering Items
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
21. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2017-18
S. No Description
1 Manufacture, Supply, & Delivery of Unplasticised Non-pressure polyvinyl
chloride(PVC-U) pipes of dark (any shade of brown) for use in underground
drainage & sewerage system conforming to IS 15328/2003) with solvent cement
jointing as per specification inclusive of transportation to the sub-divisional
stores anywhere in A.P, excluding taxes.,
Pipe Series (S25) Rate per Meter
OD 160 mm 295
OD 200 mm 449
OD 250mm 696
OD 315 mm 1098
Pipe Series (S20)
OD 125 mm 228
OD 160 mm 366
OD 200 mm 555
OD 250mm 864
OD 315 mm 1357
Pipe Series (S16.5)
OD 110 mm 201
OD 125 mm 271
OD 160 mm 424
OD 200 mm 659
OD 250mm 1022
OD 315 mm 1614
Note: The resin cost adopted for the above rates is Rs.78, 590/- per MT (Basic rate, excluding
taxes)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed
subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter
P1 = Existing pipe price in Rs. per Meter
A2 = Revised price of raw material Rs. per MT
A1 = Existing price of raw material Rs. per MT
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
64
Public Health Engineering Items
22. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2017-18
S. No Description
1 Manufacture, supply, & delivery of un-plasticized Non-Pressure Polyvinyl
Chloride(PVC-U) pipes of dark (any shade of Brown) for use in underground
drainage & sewerage system conforming to IS 15328/2003) with Elastomeric
Seal Ring Joints (Ringtite PVC Pipes)as per specification inclusive of
transportation to the Sub-Divisional stores anywhere in A.P, excluding
excluding.,
Note: The resin cost adopted for the above rates is Rs.78, 590/- per MT (Basic rate, excluding
taxes). The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be
allowed subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter
P1 = Existing pipe price in Rs. per Meter
A2 = Revised price of raw material Rs. per MT
A1 = Existing price of raw material Rs. per MT
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
65
Public Health Engineering Items
66
Public Health Engineering Items
Per KM/RMT
Note: Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*1.0
Where M= Weight of pipe in kg per Meter.
P2 = Revised rate of pipe in Rs. per Rmt
P1 = Rate of pipe in Rs. per Rmt as per above table.
R2 = Price of Pig Iron (Rs per MT excluding taxes)) at the time of preparation of estimate.
R1 = Price of Pig Iron (Rs per MT excluding taxes) at the time of preparation of SSR =Rs.
28,000/-
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
67
Public Health Engineering Items
24. S o R FOR DUCTILE IRON PRESSURE PIPES FOR THE YEAR 2017-18
68
Public Health Engineering Items
69
Public Health Engineering Items
70
Public Health Engineering Items
Note: Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per Meter as per I.S.8329-2000.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron (Rs per MT)) at the time of preparation of estimate.
R1 = Price of Pig Iron (Rs per MT) at the time of preparation
of SoR =Rs.28,000/-
The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-
B of the estimate.
.
71
Public Health Engineering Items
IV DI Flanged Socket
Up to 500 mm dia. Kg 112.76
Above 500 mm dia. Kg 125.76
V DI Flanged Spigot
Up to 500 mm dia. Kg 112.76
Above 500 mm dia. Kg 125.76
72
Public Health Engineering Items
Note-1: The above formula for calculation of revised cost to be used for preparation of Estimates
only.
Note-2:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that
during preparation of estimates, the 12% GST rate towards works contract is applied on the
Estimated Contract Value(ECV)(arrived by considering basic rates of materials) and is to be
provided in Part-B of the estimate.
73
Public Health Engineering Items
Note-1: The above formula for calculation of revised cost to be used for preparation of Estimates
only.
Note-2:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that
during preparation of estimates, the 12% GST rate towards works contract is applied on the
Estimated Contract Value(ECV)(arrived by considering basic rates of materials) and is to be
provided in Part-B of the estimate.
.
74
27. SoR FOR CI PIPES AND SPECIALS FOR THE YEAR 2017-18
Rate/ Kg including
packing, forwarding,
Sl. Quality or
Description Transit risk and delivery
No. sort
anywhere in A. P. for the
year 2017-18. (Rs.)
Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be incorporated in the
SoR are based on the following raw materials cost.
Pig Iron: Rs.28000/- per M.T. (excluding taxes)
Coke : Rs.22,000/- per M.T. .(Excluding taxes)
The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the
following method. For every increase/decrease of Rs.1000/- in the cost of raw materials or part there
of proportionately.
In respect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.
In respect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.
Note-2:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
.
75
28. S o R FOR WATER HAMMER CONTROL DEVICES FOR THE YEAR 2017-18
(Rate Each in Rs.)
Note-1: The above formula for calculation of revised cost to be used for preparation of Estimates
only.
Note-2:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
.
76
29. S o R FOR VALVES CONFORMING TO IS for normal usage 2017-18.
Sl.
Description
No.
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846
(with up to date amendments, if any) including gear arrangements for the
following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,
Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,
1 Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft
with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin
Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;
Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc.
complete ISI marked.
PN 1.0 (MPa) PN 1.6 (MPa)
DIA. IN MM Rate/Each
450 168080 210100
500 210980 263725
600 270380 337975
700 520080 375100
800 674080 650100
900 875380 705100
1000 1425380 842600
1100 1645380 960850
1200 1865380 1094225
Supply, Delivery of D.I double flanged short/Long body or Wafer Type pattern
Butterfly Valves for the following dia. conforming to IS 13095 (with up to date
amendments, if any) manually operated having Body, Disc with D.I; Shaft,
2 Seating ring, internal fastenings with Stainless steel (IS: 6603); External bolting
with Carbon steel; Seat with Nitrile or EPDM rubber; excluding transportation
and all taxes, complete.
DIA. IN MM PN 2.5 (MPa) (Rate/Each)
50 14080
100 16280
150 23980
200 43780
250 49280
300 56980
350 69080
400 100980
450 132880
500 190080
550 210980
600 234080
77
650 270380
700 328680
750 344080
800 369380
850 388080
900 438680
1000 564080
1100 674080
1200 894080
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non
Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with
amendments up to date, if any) having Body, Cover, Door, Bearing holder with
D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603);
3
Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with
Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with
Rubber; Hinges with Cast steel; excluding transportation and all taxes
complete.
PN 1.0 (MPa) PN 1.6 (MPa)
DIA. IN MM Rate/Each
50 10780 13475
100 15180 18975
150 21780 27225
200 29480 36850
250 40480 50600
300 62480 78100
350 74580 93225
400 89980 112475
450 116380 145475
500 192280 240350
550 212080 265100
600 256080 320100
Conveyance of valves and 5% on cost of valves
accessories including loading at
4
factory and unloading, stacking at
site of work.
Note: 1) The above formula for calculation of revised cost to be used for preparation of Estimates
only.
2) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
78
. 30. S o R FOR VALVES FOR HEAVY USUAGE in WTPs, STPs, Pump houses,
Pumping Mains & ELSRs 2017-18.
79
Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated
with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat
faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or
Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free
3 bronze and Integral body seat face & disc face with nickel-chromium overlay welding and
micro finished. All the inside and outside of the body is to be coated with double coating of
food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL
5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange
dimensions according to EN1092-2/IS 1538
PN 1.0 PN 1.6
DIA. IN MM PN 2.5 (MPa)
(MPa) (MPa)
a) Without By-Pass
80 11880 14850 23760
100 16280 20350 32560
150 21780 27225 43560
200 27280 34100 54560
250 39380 49225 78760
300 56980 71225 113960
b) With By-Pass
350 67980 84975 135960
400 104280 130350 208560
450 149380 186725 298760
500 206580 258225 413160
550 303380 377520 606760
600 369380 461725 738760
650 438680 548350 877360
700 548680 685850 1097360
750 850850 935935 135960
800 1100000 1210000 208560
850 67980 84975 298760
900 104280 130350 413160
1000 149380 186725 606760
1100 206580 258225
1200 303380 377520
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron
of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2
Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body
seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak
tight in both directions, Medium free bearings and with minimum thickness of 250 microns
4
Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid
Epoxy coating of minimum 150 microns applied on both body and disc inside and outside.
Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design
standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should
be suitable for buried application.
80
PN 4.0
PN 1.0 PN 1.6 PN 2.5
DIA. IN MM (MPa)
(MPa) (MPa) (MPa)
150 19580 24475 39160 146478
200 27280 34100 54560 178108
250 38280 47850 76560 249581
300 47080 58850 94160 262068
350 65780 82225 131560 285236
400 87780 109725 175560 436082
450 98780 123475 197560 -
500 127380 159225 254760 538878
600 168080 210100 336160 590468
700 218680 273350 437360 146478
800 279180 348975 558360
900 328680 410850 657360
1000 454080 567600 908160
1100 674080 842600 1348160
1200 784080 980100 1568160
1400 1098680 1373350 2197360
1600 1367080 1708850 2734160
1800 2116180 2645225 4232360
2000 2547380 3184225 5094760
2200 2838880 3548600 5677760
NOTE:- 1) All the prices are ex-go down /ex-factory. Packaging and Transportation extra at 5% on
basic cost. The grade of DI & conformation to specifications shall be certified by a third party Quality
Control Agency approved by indenting authority at the cost of supplier.
2) The above formula for calculation of revised cost to be used for preparation of Estimates only.
3) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
81
31. S o R FOR SFRC MAN-HOLE FRAME WITH COVERS FOR THE YEAR 2017-18.
Note: 1) The above formula for calculation of revised cost to be used for preparation of Estimates
only.
2) The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
82
34. S o R FOR CI and M.S. DISMANTLING JOINTS FOR THE YEAR 2017-18
83
35. OTHER ITEMS FOR THE YEAR 2017-18
Sl.
Description Unit Rate
No.
1 2 3 4
SUPPLY AND DELIVERY OF PIG LEAD 99.99
1 % PURE INCLUDING TAXES AND Per Kg 287
CONVEYANCE ETC., COMPLETE.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
.
84
36. S o R FOR TRENCH LESS TECHNOLOGY WITH PIPE JACKING METHOD FOR
THE YEAR 2017-18
Sl.
Description Unit Rate
No.
Note: The above formula for calculation of revised cost to be used for preparation of Estimates only.
Note:- The basic rates in the SoR 2017-18 are without any tax elements and suggested that during
preparation of estimates, the 12% GST rate towards works contract is applied on the Estimated
Contract Value(ECV)(arrived by considering basic rates of materials) and is to be provided in Part-B
of the estimate.
.
85
GOVERNMENT OF ANDHRA PRADESH
Sub:- Printing of Buildings-SoR for all the Engineering Departments specific to the functioning
of Building works – Buildings-SoR:2017-18 - Revised Buildings-SoR:2017-18 (with Basic
Rates ie excluding Tax) wef 01.07.2017 – Communication – Reg.,
*****
nd
Earlier vide reference 2 cited, The Buildings-SoR 2017-18 was communicated to all the
committee members constituted vide reference cited for implementation with immediate effect.
Due to implementation of Goods and Service Taxes (GST) wef 01.07.2017, BoCE has recommended to
include the basic rates in the SoR 2017-18 without any tax elements. Also suggested that during
preparation of estimates, 12% GST rate towards works contract is applied on the Estimate Contract
Value(ECV) and is to be provided in Part-B of the estimate.
In accordance therewith, The Rates for the items included in the Buildings SoR 2017-18
nd
communicated vide reference 2 cited, is modified duly deleting the taxes and arrived as Basic Rates.
The Basic rates for the Building items (Civil, Water Supply & Sanitary and Electrical items) are to
be followed henceforth by all the concerned departments for building works. Also suggested to provide
12% GST rate on the Estimate Contract Value(ECV) towards works contract in Part-B of the estimate
during preparation of estimates. The rates of Labour, Common Material & Work items, Public Health
items, Conveyance Rates of Materials & Hire charges approved and published in Common SoR-2017-18
remain applicable. No other items other than the items communicated in this Buildings-SoR2017-18 and
Common SoR-2017-18 shall be introduced.
The Heads of Departments mentioned below are authorized to print the Buildings-SoR: 2017-18.
The unauthorized printing & selling of the Buildings-SoR is strictly prohibited.
The revised rates will come into force with immediate effect.
Sd/- 22.09.2017
Sri. M. Subba Rao
Chief Engineer (R&B) Buildings & RSW
Convener-Member,
Committee of Chief Engineers-Buildings-SoR
To
1. Chief Engineer ( RSW & Buildings), Roads & Buildings Department, Ibrahimpatnam, Vijayawada.
2. Chief Engineer (R&B) (Electrical), R&B Department, Ibrahimpatnam, Vijayawada.
3. Engineer-in-Chief, Public Health Department, Mahatma Gandhi Inner Ring Rd, Gorantla, Guntur-
522034.
4. Engineer-in-Chief (P.R.), Panchayat Raj Department, D.No.3-20/4,Tankasala Kalyana Mandapam,
Enikepadu, Vijayawada.
5. Engineer-in-Chief, Tribal Welfare & Social Welfare Department, Plot No.401 & 402, Garuda Enclave,
Tadepalli, Guntur District
ii
Building SoR: 2017-18 (Civil & Electrical)
Copy also to
1. Engineer-in-Chief(Admn, SH, NH, CRF, NABARD, PPP & RDF, MD APRDC, EAPs, Corridor Projects),
R&B Department, Ibrahimpatnam, Vijayawada
2. Engineer-in-Chief (IW) I&CAD, Irrigation Department, Ramavarapadu, Vijayawada-520008.
st
3. Chief Engineer (COT), 76-16-4A/1,1 floor, Iron Yard, Opp. to Ramayalam, Vijayawada-520012.
4. Chief Engineer (MDRs & LWE) R&B Department, Ibrahimpatnam, Vijayawada
4. Chief Engineer (QC), R&B Department, Ibrahimpatnam, Vijayawada
5. Superintending Engineer (Designs& Planning), R & B Department, Ibrahimpatnam, Vijayawada.
iii
Building SoR: 2017-18 (Civil & Electrical)
SCHEDULE OF RATES
FOR
BUILDING WORKS
ALL ENGINEERING
DEPARTMENTS
iv
Building SoR: 2017-18 (Civil & Electrical)
INDEX FOR BUILDINGS SoR: 2017-18 (Civil & Electrical)
From To
BUILDINGS – SoR:2017-18
v
Building SoR: 2017-18 (Civil & Electrical)
BUILDINGS SoR:2017-18
Pages
Sl No SECTION SECTION CODE DESCRIPTION
From To
1 PREAMBLE 7 10
vi
Building SoR: 2017-18 (Civil & Electrical)
7
Building SoR: 2017-18 (Civil & Electrical)
vi. Sales/ Turn overtax is replaced with GST wef 01.07.2017. The rates
arrived in this SoR are only basic rates which are exclusive of all taxes.
However, as per the suggestion of BoCE, the provision towards Works
Contract Tax as per applicable GST rates shall be added in the estimates.
vii. Work Insurance/ compensation - Works insurance is dispensed with vide G.O.
Ms. No: 61 Irrigation & CAD (PW:Reforms) Department Dt. 25-06-2013.
Further,It is decided not to insist upon insuring all the building works as
provision for this component is already deleted from the ‘Overheads &
Contractor’s Profit’ in building works.
8
Building SoR: 2017-18 (Civil & Electrical)
15. For the materials where the basic rates are mentioned as ‘quarry rates’ in the
Buildings SoR, which includes initial lead of 1.0 km, lead charges are to be added for
the lead distances from the approved quarries as applicable. Wherever the term
“carriage” or “conveyance” is used in schedule item, it shall be taken to include actual
leads, lifts, loading, unloading and stacking to the satisfaction of the technical
sanctioning authority while making the price-adjustments.
16. The basic item rates provided in the schedule of rates include 50 m (conveyance by
manual means) or 1 km (conveyance by mechanical means) as initial lead and no lead
charges shall be allowed where the source of material is within the initial lead specified
in item rate. Additional lead charges shall be allowed for the lead exceeding initial lead
specified in the item rate.
17. The lead charges per unit quantity for conveyance of the materials are worked out,
and included in the schedule of rates in increment of 50 m for head load and in
increment of 1 km for mechanical mode.
18. The rates for lead charges by head load up to 150 meters and by machinery up to 5
km shall be cumulative and inclusive of lead charges for proceeding lead.
19. For building works taken up in the hill areas where the materials are conveyed on ghat
roads,the lead distance may be taken as 2.0 times of the existing length of the road for
the purpose of leads only for conveyance of materials based on the certificate for the
Ghat Road given by the Superintending Engineer concerned.
20. Loading and unloading charges are not payable for conveyance by head load.
21. Loading and unloading charges are not payable for conveyance by mechanical
means,for disposal of excavated material unless specified.
22. The rates for unloading of materials except earth, sand, gravel, coarse aggregate,
rubble, size stone and cut stone, are inclusive of stacking wherever applicable.
23. The input rate for the water charges taken in Common Standard Schedule of Rates for
the basic data is for the sources at site, any water lead as applicable may be allowed
as per the conveyance charges.
24. Unless otherwise specified, all material rates shall be inclusive of all taxes, duties,
levies, royalty/seigniorage, transportation and handling costs up to project area, but
excluding ‘Works Contract Tax’.
25. Any errors, omissions, corrections or suggestions shall be brought to the notice of the
‘COMMITTEE OF THE CHIEF ENGINEERS (Buildings SoR)’ for corrective action.
26. For any new items to be included in the ‘Schedule of Rates’, recommendations with
specific remarks of the respective departments should reach the ‘Committee of Chief
Engineers’ well in advance.
27. The CWC (Ministry of Irrigation) has recommended that “where standard or
schedule of rates are revised or where is necessary to do so, the primary
guiding principle should be escalation in labour and material cost and not on
trend of rates quoted by the contractors”. The ‘Committee of Chief engineers’
(Buildings SoR) have considered the practicality and adoptability of the ‘Buildings-SoR’
in construction of the building projects in finalizing the ‘Buildings-SoR’.
28. Wherever feasible, more emphasis is given to the technical specifications for the SoR
items by removing the brand names of the manufacturers from the specification and
list of approved brands in the respective category for the products is grouped and
appended at the end of the SoR so as to bring to an end of encouraging a particular
brand.
29. The estimate preparing authorities are advised to specify the brand names/
manufacturers in the contract documents as per the requirement.
30. The technical specifications, brand names and the corresponding rates given in the
‘water proofing and chemical admixtures’ section are for the guidance only. The
estimate preparing authorities are requested to obtain literature for usage / application
of construction / water proofing materials, epoxies etc, from the manufacturers or
authorized suppliers in the contract documents as per the requirement.
9
Building SoR: 2017-18 (Civil & Electrical)
5.0 CONCLUSION
1. Based on the recommendations of the BoCEs to include the basic rates in the SoR 2017-18
without any tax elements, Buildings-SoR: 2017-18 (Civil & Electrical) communicated vide
Procs.No. ENC(B)/DEE-3/AEE9/SoR: 2017-18 Dt: 05.07.2017 is modified. Also, as per the
suggestion of BoCE, 12% GST rate on the Estimate Contract Value(ECV) towards works
contract shall be provided in Part-B of the estimate during preparation of estimates.
2. SSR Rates for Civil, Sanitary & water supply and Electrical Items are purely for the guidance of
the officers in preparation of estimates vide Para 113 of APPWD code. Authority who
prepares the estimate is however responsible for proper rates as envisaged in Para 45 of
APPWD code.
3. The rates published in the Buildings SoR are ceiling rates and the estimate preparing
authorities are responsible for the correctness and reasonableness of the rates and technical
specifications adopted in the estimates.
4. The committee has resolved to amend the Standard Data of earth work items such as earth
work excavation in all types of soils and rocks and refilling beyond 3.0 M depth, for every 1.0
M depth or part thereof, allowance of 10% extra shall be added over the basic rate.
5. The committee has further resolved that all the amendments that are issued to the A.P.
Revised Standard Data-2009 are effective from retrospective date of publication of data
approved vide G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dated: 02-03-2009.
10
Building SoR: 2017-18 (Civil & Electrical)
BUILDING ITEMS
11
Building SoR: 2017-18 (Civil & Electrical)
1 2 3 4 5
BRICKS & BUILDING BLOCKS
A. (Ex-quarry price - including loading excluding cost of
conveyance, unloading & stacking)
ORDINARY CLAY BRICKS
Common burnt clay bricks of class as per Table-1 of
1 BMT-A.01 IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 1000 Nos 4672
cm
Common burnt clay bricks of class as per Table-1 of
2 BMT-A.02 1000 Nos 5256
IS:1077-1992 Modular or traditional size 19 x 9 x 9 cm
FLY-ASH CEMENT/LIME SOLID BLOCKS
(ex-quarry price - excluding cost of conveyance,
loading & unloading)
Fly ash cement/lime solid blocks with compressive
3 BMT-A.03 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 21
290 x 225 x 140 mm
Fly ash cement/lime solid blocks with compressive
4 BMT-A.04 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 19
290 x 200 x 140 mm
Fly ash cement/lime solid blocks with compressive
5 BMT-A.05 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 17
290 x 150 x 140 mm
Fly ash cement/lime solid blocks with compressive
6 BMT-A.06 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 12
290 x 112/100 x 140 mm
Fly ash cement/lime solid blocks with compressive
7 BMT-A.07 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 6
225 x 100 x 60 mm
Fly ash cement/lime solid blocks with compressive
8 BMT-A.08 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 13
145 x 225 x 140 mm
Fly ash cement/lime solid blocks with compressive
9 BMT-A.09 strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - Each 10
145 x 200 x 140 mm
Fly ash cement/ lime solid blocks with compressive
10 BMT-A.10 strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 - Each 20
290 x 225 x 140 mm
Fly ash cement/ lime solid blocks with compressive
11 BMT-A.11 strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 - Each 16
290 x 200 x 140 mm
Fly ash cement/ lime solid blocks with compressive
12 BMT-A.12 strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 - Each 17
290 x 150 x 140 mm
Fly ash cement/ lime solid blocks with compressive
13 BMT-A.13 strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 -290 Each 9
x 112/100 x 140 mm
12
Building SoR: 2017-18 (Civil & Electrical)
13
Building SoR: 2017-18 (Civil & Electrical)
14
Building SoR: 2017-18 (Civil & Electrical)
15
Building SoR: 2017-18 (Civil & Electrical)
16
Building SoR: 2017-18 (Civil & Electrical)
17
Building SoR: 2017-18 (Civil & Electrical)
18
Building SoR: 2017-18 (Civil & Electrical)
19
Building SoR: 2017-18 (Civil & Electrical)
20
Building SoR: 2017-18 (Civil & Electrical)
21
Building SoR: 2017-18 (Civil & Electrical)
22
Building SoR: 2017-18 (Civil & Electrical)
23
Building SoR: 2017-18 (Civil & Electrical)
24
Building SoR: 2017-18 (Civil & Electrical)
25
Building SoR: 2017-18 (Civil & Electrical)
195 BMT-G.35 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 29
196 BMT-G.36 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 42
197 BMT-G.37 Brass Aldrop (IS:2681) 300 mm long Each 1087
198 BMT-G.38 Brass Aldrop (IS:2681) 350 mm long Each 2094
199 BMT-G.39 Brass Aldrop (IS:2681) 450 mm long Each 2982
200 BMT-G.40 Aluminium Aldrop (IS:2681) 200 mm long Each 279
201 BMT-G.41 Aluminium Aldrop (IS:2681) 250 mm long Each 331
202 BMT-G.42 Aluminium Aldrop (IS:2681) 300 mm long Each 360
203 BMT-G.43 MS-Powder Coated Aldrop (IS:2681) 200 mm long Each 97
204 BMT-G.44 MS-Powder Coated Aldrop (IS:2681) 250 mm long Each 128
205 BMT-G.45 MS-Powder Coated Aldrop (IS:2681) 300 mm long Each 153
206 BMT-G.46 Brass Door Stoppers Each 168
207 BMT-G.47 Brass Windows Stay Each 190
208 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 135
209 BMT-G.49 Aluminium Flat Latches: 250 mm long Each 152
210 BMT-G.50 Aluminium Flat Latches: 300 mm long Each 159
211 BMT-G.51 MS-Powder Coated Flat Latches: 250 mm long Each 49
212 BMT-G.52 MS-Powder Coated Flat Latches: 300 mm long Each 62
213 BMT-G.53 MS-Powder Coated - Door Stoppers Each 42
Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder
214 BMT-G.54 RM 108
coated with PVC rings
215 BMT-G.55 Supply & fixing drapery bracket - brass powder coated pair 382
216 BMT-G.56 Deluxe window stay Aluminium Each 122
217 BMT-G.57 Heavy duty Aluminium Door stopper Each 53
218 BMT-G.58 Brass fancy handles 150 mm Each 284
219 BMT-G.59 Brass fancy handles 200 mm Each 384
220 BMT-G.60 Brass fancy handles 250 mm Each 693
221 BMT-G.61 Brass fancy handles 300 mm Each 885
222 BMT-G.62 Brass fancy handles 450 mm Each 1384
Providing and fixing Cast Iron Body Bottle Type Hydraulic
223 BMT-G.63 Door Closer (IS: 3564) with double speed adjustment, with Each 876
necessary accessories and screws etc. complete
Double action Stainless steel cover plate and cast body
224 BMT-G.64 Each 1619
iron floor spring (IS 6315- Table-1)
Double action Brass cover plate and cast brass body floor
225 BMT-G.65 Each 3840
spring (IS 6315- Table-1)
Heavy duty mortise lock 6/7 levers (IS:2209) with PC or
226 BMT-G.66 CP handles complete set Each 792
26
Building SoR: 2017-18 (Civil & Electrical)
27
Building SoR: 2017-18 (Civil & Electrical)
28
Building SoR: 2017-18 (Civil & Electrical)
29
Building SoR: 2017-18 (Civil & Electrical)
274 BMT-H.35 Rust converter –rust encapsulating coating for steel 1 Ltr 419
High range of reinforcement / steel protector against
275 BMT-H.36 1 Kg 444
corrosion zinc rich epoxy resin primer
Anti corrosion CRPPC (Corrosion Resistant) inhibitive
276 BMT-H.37 1 Ltr 315
admixture
GROUTS
High Power Polyester Resin Anchor Grout Conforming to
277 BMT-H.38 1 Kg 246
ASTM-827
Non-shrink Free flow high strength precision grout
278 BMT-H.39 1 Kg 21
Conforming to BS 1881 Part 1161983.
279 BMT-H.40 Low viscosity Epoxy resin injection grout 1 Kg 444
Three component epoxy grout Conforming to IS: ASTM
280 BMT-H.41 1 Kg 140
827 (Three components)
MISCELLANEOUS CHEMICALS
30
Building SoR: 2017-18 (Civil & Electrical)
31
Building SoR: 2017-18 (Civil & Electrical)
BMT-I.02 1 sqm
306 Plain Float Glass 5 mm thick 474
32
Building SoR: 2017-18 (Civil & Electrical)
33
Building SoR: 2017-18 (Civil & Electrical)
361 BMT-K.01 Melamine faced Single Deco PPB- 8 mm thick 1Sqm 590
BMT-K.02 1Sqm
362 Melamine faced Single Deco PPB- 12 mm thick 670
363 BMT-K.03 Melamine faced Single Deco PPB- 18 mm thick 1Sqm 776
364 BMT-K.04 Melamine faced Single Deco PPB- 25 mm thick 1 Sqm 879
365 BMT-K.05 Melamine faced Single Deco PPB- 35 mm thick 1 Sqm 1463
366 BMT-K.06 Melamine faced Twin Deco PPB- 8 mm thick 1 Sqm 679
367 BMT-K.07 Melamine faced Twin Deco PPB- 12 mm thick 1 Sqm 776
368 BMT-K.08 Melamine faced Twin Deco PPB-18 mm thick 1 Sqm 898
369 BMT-K.09 Melamine faced Twin Deco PPB-25 mm thick 1 Sqm 995
34
Building SoR: 2017-18 (Civil & Electrical)
370 BMT-K.10 Melamine faced Twin Deco PPB-35 mm thick 1 Sqm 1869
371 BMT-K.11 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 220
372 BMT-K.12 Natural Colour-Insulating Board - 18 mm thick 1 Sqm 325
373 BMT-K.13 Natural Colour-Insulating Board - 25 mm thick 1 Sqm 414
374 BMT-K.14 White Insulating Board - 12 mm thick 1 Sqm 268
375 BMT-K.15 White Insulating Board - 18 mm thick 1 Sqm 383
376 BMT-K.16 White Insulating Board - 25 mm thick 1 Sqm 341
377 BMT-K.17 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 359
378 BMT-K.18 Medium Fibre Board: Interior Grade - 8 mm thick 1 Sqm 407
379 BMT-K.19 Medium Fibre Board: Interior Grade - 12 mm thick 1 Sqm 545
380 BMT-K.20 Medium Fibre Board: Interior Grade - 15 mm thick 1 Sqm 693
381 BMT-K.21 Medium Fibre Board: Interior Grade - 18 mm thick 1 Sqm 773
382 BMT-K.22 Medium Fibre Board: Interior Grade - 25 mm thick 1 Sqm 1098
383 BMT-K.23 Medium Fibre Board: Interior Grade - 30 mm thick 1 Sqm 1327
384 BMT-K.24 Medium Fibre Board: Interior Grade - 35 mm thick 1 Sqm 1447
385 BMT-K.25 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm. 488
386 BMT-K.26 Medium Fibre Board: Exterior Grade - 8 mm thick 1 Sqm. 569
387 BMT-K.27 Medium Fibre Board: Exterior Grade - 12 mm thick 1 Sqm. 753
388 BMT-K.28 Medium Fibre Board: Exterior Grade - 15 mm thick 1 Sqm. 946
389 BMT-K.29 Medium Fibre Board: Exterior Grade - 18 mm thick 1 Sqm. 1059
390 BMT-K.30 Medium Fibre Board: Exterior Grade - 25 mm thick 1 Sqm. 1411
391 BMT-K.31 Medium Fibre Board: Exterior Grade - 30 mm thick 1 Sqm. 1758
392 BMT-K.32 Medium Fibre Board: Exterior Grade - 35 mm thick 1 Sqm. 2077
393 BMT-K.33 MDF Board: Plain-Interior - 9 mm thick 1 Sqm 329
394 BMT-K.34 MDF Board: Plain-Interior - 12 mm thick 1 Sqm 374
395 BMT-K.35 MDF Board: Plain-Interior - 18 mm thick 1 Sqm 463
396 BMT-K.36 MDF Board: Plain-Interior - 25 mm thick 1 Sqm 556
397 BMT-K.37 MDF Board: Plain-Interior - 30 mm thick 1 Sqm 847
398 BMT-K.38 MDF Board: Plain-Interior - 35 mm thick 1 Sqm 1002
399 BMT-K.39 MDF Board: Plain-Exterior - 9 mm thick 1 Sqm 431
400 BMT-K.40 MDF Board: Plain-Exterior - 12 mm thick 1 Sqm 463
401 BMT-K.41 MDF Board: Plain-Exterior - 18 mm thick 1 Sqm 608
402 BMT-K.42 MDF Board: Plain-Exterior - 25 mm thick 1 Sqm 762
403 BMT-K.43 MDF Board: Plain-Exterior - 30 mm thick 1 Sqm 1002
404 BMT-K.44 MDF Board: Plain-Exterior - 35 mm thick 1 Sqm 1155
405 BMT-K.45 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 516
406 BMT-K.46 MDF Board: Interior-One Side Laminated -12 mm thick 1 Sqm 583
407 BMT-K.47 MDF Board: Interior-One Side Laminated -18 mm thick 1 Sqm 679
408 BMT-K.48 MDF Board: Interior-One Side Laminated -25 mm thick 1 Sqm 762
35
Building SoR: 2017-18 (Civil & Electrical)
409 BMT-K.49 MDF Board: Interior-One Side Laminated -30 mm thick 1 Sqm 1102
410 BMT-K.50 MDF Board: Interior-One Side Laminated -35 mm thick 1 Sqm 1176
411 BMT-K.51 MDF Board: Exterior-One Side Laminated -9 mm thick 1 Sqm 593
412 BMT-K.52 MDF Board: Exterior-One Side Laminated -12 mm thick 1 Sqm 666
413 BMT-K.53 MDF Board: Exterior-One Side Laminated -18 mm thick 1 Sqm 755
414 BMT-K.54 MDF Board: Exterior-One Side Laminated -25 mm thick 1 Sqm 882
415 BMT-K.55 MDF Board: Exterior-One Side Laminated -30 mm thick 1 Sqm 1176
416 BMT-K.56 MDF Board: Exterior-One Side Laminated -35 mm thick 1 Sqm 1249
417 BMT-K.57 MDF Board: Interior-Both Side Laminated -9 mm thick 1 Sqm 590
418 BMT-K.58 MDF Board: Interior-Both Side Laminated -12 mm thick 1 Sqm 666
419 BMT-K.59 MDF Board: Interior-Both Side Laminated -18 mm thick 1 Sqm 762
420 BMT-K.60 MDF Board: Interior-Both Side Laminated -25 mm thick 1 Sqm 958
421 BMT-K.61 MDF Board: Interior-Both Side Laminated -30 mm thick 1 Sqm 1176
422 BMT-K.62 MDF Board: Interior-Both Side Laminated -35 mm thick 1 Sqm 1249
423 BMT-K.63 MDF Board: exterior-Both Side Laminated -9 mm thick 1 Sqm 666
424 BMT-K.64 MDF Board: exterior-Both Side Laminated -12 mm thick 1 Sqm 754
425 BMT-K.65 MDF Board: exterior-Both Side Laminated -18 mm thick 1 Sqm 892
426 BMT-K.66 MDF Board: exterior-Both Side Laminated -25 mm thick 1 Sqm 975
427 BMT-K.67 MDF Board: exterior-Both Side Laminated -30 mm thick 1 Sqm 1234
428 BMT-K.68 MDF Board: exterior-Both Side Laminated -35 mm thick 1 Sqm 1323
Cement bonded paricle board conforming to is 14276-6
429 BMT-K.69 1 sqm 221
mm thick
Cement bonded paricle board conforming to is 14276- 8
430 BMT-K.70 1 sqm 296
mm thick
Cement bonded paricle board conforming to is 14276- 10
431 BMT-K.71 1 sqm 371
mm thick
Cement bonded paricle board conforming to is 14276- 12
432 BMT-K.72 1 sqm 456
mm thick
Cement bonded paricle board conforming to is 14276- 16
433 BMT-K.73 1 sqm 602
mm thick
Cement bonded paricle board conforming to is 14276- 20
434 BMT-K.74 1 sqm 734
mm thick
Cement bonded paricle board conforming to is 14276- 25
435 BMT-K.75 1 sqm 921
mm thick
Cement bonded paricle board conforming to is 14276- 30
436 BMT-K.76 1 sqm 1119
mm thick
Cement bonded paricle board conforming to is 14276- 40
437 BMT-K.77 1 sqm 1495
mm thick
438 BMT-K.78 Pre laminated cement bonded particle board-6 mm thick 1 sqm 498
439 BMT-K.79 Pre laminated cement bonded particle board-8 mm thick 1 sqm 545
440 BMT-K.80 Pre laminated cement bonded particle board- 10 mm thick 1 sqm 583
441 BMT-K.81 Pre laminated cement bonded particle board- 12 mm thick 1 sqm 639
36
Building SoR: 2017-18 (Civil & Electrical)
442 BMT-K.82 Pre laminated cement bonded particle board- 16 mm thick 1 sqm 714
Cement Bonded Particale DESIGNER BOARD Available
443 BMT-K.83 Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 1 sqm 272
10’X4’- 6mm thick
Cement Bonded Particale DESIGNER BOARD Available
444 BMT-K.84 Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 1 sqm 329
10’X4’- 8mm thick
Cement Bonded Particale DESIGNER BOARD Available
445 BMT-K.85 Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 1 sqm 404
10’X4’- 10mm thick
Cement Bonded Particale DESIGNER BOARD Available
446 BMT-K.86 Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 1 sqm 498
10’X4’- 12mm thick
Cement Bonded Particale DESIGNER BOARD Available
447 BMT-K.87 Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 1 sqm 658
10’X4’- 16mm thick
Cement Bonded Board conforming to IS:14862-2000 -
448 BMT-K.88 1 Sqm 139
4mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
449 BMT-K.89 1 Sqm 199
6mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
450 BMT-K.90 1 Sqm 256
8mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
451 BMT-K.91 1 Sqm 294
10mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
452 BMT-K.92 1 Sqm 367
12mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
453 BMT-K.93 1 Sqm 410
14mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
454 BMT-K.94 1 Sqm 466
16mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
455 BMT-K.95 1 Sqm 529
18mm Thick
Cement Bonded Board conforming to IS:14862-2000 -
456 BMT-K.96 1 Sqm 561
20mm Thick
457 BMT-K.97 Laminate Sheets - Glossy Finish: 1 mm thick 1 Sqm 341
458 BMT-K.98 Laminate Sheets - Glossy Finish: 1.50 mm thick 1 Sqm 488
459 BMT-K.99 Laminate Sheets - Glossy Finish: 1.80 mm thick 1 Sqm 536
460 BMT-K.100 Laminate Sheets - Mat Finish: 1 mm thick 1 Sqm 362
461 BMT-K.101 Laminate Sheets - Mat Finish: 1.50 mm thick 1 Sqm 505
462 BMT-K.102 Laminate Sheets - Mat Finish: 1.80 mm thick 1 Sqm 544
463 BMT-K.103 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 381
464 BMT-K.104 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 702
465 BMT-K.105 8 mm thick V-Designer Board 1 Sqm 345
466 BMT-K.106 50 mm thick V-PANEL 1 Sqm 907
467 BMT-K.107 75 mm thick V-PANEL 1 Sqm 1088
37
Building SoR: 2017-18 (Civil & Electrical)
L. PLYWOOD
(Landing cost - loading, cost of conveyance,
unloading & stacking)
468 BMT-L.01 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 345
38
Building SoR: 2017-18 (Civil & Electrical)
39
Building SoR: 2017-18 (Civil & Electrical)
40
Building SoR: 2017-18 (Civil & Electrical)
41
Building SoR: 2017-18 (Civil & Electrical)
42
Building SoR: 2017-18 (Civil & Electrical)
43
Building SoR: 2017-18 (Civil & Electrical)
44
Building SoR: 2017-18 (Civil & Electrical)
45
Building SoR: 2017-18 (Civil & Electrical)
46
Building SoR: 2017-18 (Civil & Electrical)
47
Building SoR: 2017-18 (Civil & Electrical)
48
Building SoR: 2017-18 (Civil & Electrical)
DOORS
N. (Landing cost - loading, cost of conveyance,
unloading & stacking)
Providing and fixing factory made polyvinyl chloride (PVC)
Door Frame of the size 50 x 47mm with a wall thickness of
5mm, made out of extruded 10 mm rigid PVC foam sheet,
mitre cut at two corners and joined with 2nos. of 150mm
long brackets of 15x15mm M.S. square tube. The two
vertical door profiles are to be reinforced with 19x19mm
582 BMT-N.01 M.S. Square tube of 19 gauge. The door frame shall be 1 Rm 275
fixed to the wall using 65/100mm long M.S. Screws
through the frame by using PVC fasteners. A minimum of
4nos. of screws to be provided for each vertical member &
minimum 2nos. for horizontal member etc. complete as
per manufacturers specification and direction of Engineer-
in-Charge for finished item of work
Providing and fixing 30mm thick Solid panel PVC door
shutter consisting of frame made out of M.S. tubes of 19
gauge thickness and size of 19mm x 19mm for stiles, &
15mm x 15mm for top & bottom rails. M.S. frame shall
have a coat of steel primers of approved make and
manufacture. M.S. frame shall be covered with 5mm thick
heat moulded PVC ‘C’ channel of size 30 x 50mm forming
stiles, and 5mm thick, 75mm wide PVC sheets for top rail,
lock rail & bottom rail on either side, and 10mm (5mm x 2)
583 BMT-N.02 thick, 20mm wide cross PVC sheet as gap insert for top 1 Sqm 2000
rail & bottom rail. Panelling of 5mm thick PVC sheet to be
fitted in the M.S. frame welded / sealed to the stiles & rails
with 30mm wide x 5mm thick PVC sheet beading on either
side, and joined together with solvent cement adhesive
etc. An additional 5mm thick PVC strip of 20mm width is to
be stuck on the interior side of the ‘C’ Channel using PVC
solvent adhesive. Complete as per direction of Engineer-
in-charge, manufacturer’s specification & drawing for
finished item of work .
49
Building SoR: 2017-18 (Civil & Electrical)
50
Building SoR: 2017-18 (Civil & Electrical)
51
Building SoR: 2017-18 (Civil & Electrical)
52
Building SoR: 2017-18 (Civil & Electrical)
53
Building SoR: 2017-18 (Civil & Electrical)
54
Building SoR: 2017-18 (Civil & Electrical)
55
Building SoR: 2017-18 (Civil & Electrical)
56
Building SoR: 2017-18 (Civil & Electrical)
57
Building SoR: 2017-18 (Civil & Electrical)
58
Building SoR: 2017-18 (Civil & Electrical)
59
Building SoR: 2017-18 (Civil & Electrical)
60
Building SoR: 2017-18 (Civil & Electrical)
61
Building SoR: 2017-18 (Civil & Electrical)
62
Building SoR: 2017-18 (Civil & Electrical)
63
Building SoR: 2017-18 (Civil & Electrical)
64
Building SoR: 2017-18 (Civil & Electrical)
65
Building SoR: 2017-18 (Civil & Electrical)
66
Building SoR: 2017-18 (Civil & Electrical)
67
Building SoR: 2017-18 (Civil & Electrical)
68
Building SoR: 2017-18 (Civil & Electrical)
69
Building SoR: 2017-18 (Civil & Electrical)
70
Building SoR: 2017-18 (Civil & Electrical)
71
Building SoR: 2017-18 (Civil & Electrical)
72
Building SoR: 2017-18 (Civil & Electrical)
73
Building SoR: 2017-18 (Civil & Electrical)
74
Building SoR: 2017-18 (Civil & Electrical)
75
Building SoR: 2017-18 (Civil & Electrical)
76
Building SoR: 2017-18 (Civil & Electrical)
77
Building SoR: 2017-18 (Civil & Electrical)
78
Building SoR: 2017-18 (Civil & Electrical)
79
Building SoR: 2017-18 (Civil & Electrical)
80
Building SoR: 2017-18 (Civil & Electrical)
81
Building SoR: 2017-18 (Civil & Electrical)
82
Building SoR: 2017-18 (Civil & Electrical)
83
Building SoR: 2017-18 (Civil & Electrical)
84
Building SoR: 2017-18 (Civil & Electrical)
85
Building SoR: 2017-18 (Civil & Electrical)
86
Building SoR: 2017-18 (Civil & Electrical)
87
Building SoR: 2017-18 (Civil & Electrical)
88
Building SoR: 2017-18 (Civil & Electrical)
Q. STRUCTURAL GLAZING
Providing and fixing Structural Glazing fabricated from Roll
formed sections made of Pre-painted Steel / Powder
coated (Base steel as per IS 513 of ‘D’ quality, galvanized
742 BMT-Q.01 as per IS 277 with Zinc of 120 Gm/Sqm) with total coated 1 Sqm 6625
thickness of 0.72 mm and the glass holding section made
of 304 grade stainless steel of 0.58 mm thick galvanised
steel section as stiffeners inside the colour coated steel
89
Building SoR: 2017-18 (Civil & Electrical)
90
Building SoR: 2017-18 (Civil & Electrical)
91
Building SoR: 2017-18 (Civil & Electrical)
92
Building SoR: 2017-18 (Civil & Electrical)
V. LABOUR CHARGES
Bailing out water for earth work excavation /concrete for
777 BMM-V.01 foundation below water level. (For building items only) - 1 cum 220
Other than sandy soil - 0.0 M to 1.0 M
Bailing out water for earth work excavation /concrete for
778 BMM-V.02 foundation below water level. (For building items only) - 1 cum 260
Other than sandy soil - 1.0 M to 2.0 M
Bailing out water for earth work excavation /concrete for
779 BMM-V.03 foundation below water level. (For building items only) - 1 cum 303
Other than sandy soil - 2.0 M to 3.0 M
Bailing out water for earth work excavation / for concrete
780 BMM-V.04 foundation below water level. (For building items only) 1 cum 349
Sandy soil - 0.0 M to 1.0 M
Bailing out water for earth work excavation /for concrete
781 BMM-V.05 foundation below water level. (For building items only) 1 cum 542
Sandy soil - 1.0 M to 2.0 M
Bailing out water for earth work excavation /concrete for
782 BMM-V.06 foundation below water level. (For building items only) 1 cum 655
Sandy soil - 2.0 M to 3.0 M
93
Building SoR: 2017-18 (Civil & Electrical)
94
Building SoR: 2017-18 (Civil & Electrical)
95
Building SoR: 2017-18 (Civil & Electrical)
96
Building SoR: 2017-18 (Civil & Electrical)
97
Building SoR: 2017-18 (Civil & Electrical)
98
Building SoR: 2017-18 (Civil & Electrical)
99
Building SoR: 2017-18 (Civil & Electrical)
100
Building SoR: 2017-18 (Civil & Electrical)
876 BMS-W.53 Dressing faces of granite stone (double line dressing) 1 Sqm 174
Dressing faces of other than granite stone(double line
877 BMS-W.54 1 Sqm 108
dressing)
Supply of Pre-painted Galvalume Trapezoidal Profile
Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc
coating AZ150 GSM. Tensile Strength: 550 MPA. Paint
878 BMS-W.55 coating: Regular Modified Polyester painting. Painting 1 Sqm 386
Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7
Microns. Sheet Width: 1.020, Length: Maximum 12 Meters
with Regular Range Colours
101
Building SoR: 2017-18 (Civil & Electrical)
894 BMS-W.71 Nylon rollers for sliding glasses/ alluminium windows 1 Each 13
102
Building SoR: 2017-18 (Civil & Electrical)
899 BMS-W.76 Drilling holes in hard rock surfaces up to 18mm dia 1 RM 178
900 BMS-W.77 Drilling holes in hard rock above 18mm dia 1 RM 248
Making holes up to 18mm dia in RCC/ any stones up to 50
901 BMS-W.78 1 Each 30
mm thick
Making holes above 18mm dia in RCC/ any stones above
902 BMS-W.79 1 Each 41
50 mm thick
Pressure grouting the drilled holes with neat cement slurry
903 BMS-W.80 1 Each 42
or with approved epoxy bonding agent using pump
103
Building SoR: 2017-18 (Civil & Electrical)
1 All the items to be used on the works shall be of first quality & ISI marked wherever possible and as
approved, workmanship shall be as approved by the Engineer-In-charge of the work.
2 Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
3 Works Contract VAT for General/ Composition Scheme on finished items may be allowed in the estimates
as applicable.
4 SSR Rates for Building items are purely for the guidance of the officers in preparation of estimates vide para.113 of
APPWD code. Authority who prepares the estimate is however responsible for proper rates as envisaged in
para.45 of APPWD code.
LEGEND:
"BMT" -X.XX,
"BMM"-X.XX,
"BMS"-X.XX,
"BMC"-X.XX
XXX-"A".XX - Denotes the Section
XXX-X."01" - Denotes the Serial Number of the Item in the corresponding Section
104
Building SoR: 2017-18 (Civil & Electrical)
Centring
Material Hire Labour Unit of
Sl NAME OF THE STRUCTURAL MEMBER Charges for
charges charges Measurement
2017-18
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING
A FOOTINGS Rs. 277 Rs. 473 Rs. 750 per 1 cum
B BED BLOCKS, BANDS Rs. 61 Rs. 244 Rs. 305 per 1 cum
C PEDESTALS Rs. 315 Rs. 753 Rs. 1068 per 1 cum
D PLINTH BEAMS Rs. 1335 Rs. 1141 Rs. 2476 per 1 cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,
E LINTELS Rs. 1133 Rs. 1211 Rs. 2344 per 1 cum
F CHAJJAS - SUNSHADES Rs. 224 Rs. 186 Rs. 410 per 1 sqm
G COLUMNS Rs. 341 Rs. 1700 Rs. 2041 per 1 cum
H BEAMS Rs. 2002 Rs. 1426 Rs. 3428 per 1 cum
I SLABS - Up to 150 mm thick Rs. 227 Rs. 162 Rs. 389 per 1 sqm
J SLABS - above 150 mm - Up to 300 mm Rs. 233 Rs. 166 Rs. 399 per 1 sqm
thick
K SLABS - above 300 mm thick Rs. 244 Rs. 174 Rs. 418 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams with Rs. 824 Rs. 587 Rs. 1411 per 1 sqm
Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 578 Rs. 412 Rs. 990 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 2276 Rs. 1621 Rs. 3897 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 2308 Rs. 1644 Rs. 3952 per 1 cum
P DOME SLABS Rs. 3681 Rs. 2621 Rs. 6302 per 1 cum
Q HELICAL STAIRCASES Rs. 280 Rs. 200 Rs. 480 per 1 sqm
R SHEAR WALLS, RCC WALLS, WATER DELETED
TANK WALLS
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M Casurina Ballies, Bamboos,
Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
E LINTELS Rs. 760 Rs. 953 Rs. 1713 per 1 cum
F CHAJJAS - SUNSHADES Rs. 150 Rs. 146 Rs. 296 per 1 sqm
G COLUMNS Rs. 229 Rs. 1338 Rs. 1567 per 1 cum
H BEAMS Rs. 1342 Rs. 1122 Rs. 2464 per 1 cum
I SLABS - Up to 150 mm thick Rs. 152 Rs. 127 Rs. 279 per 1 sqm
J SLABS - above 150 mm - Up to 300 mm Rs. 156 Rs. 131 Rs. 287 per 1 sqm
thick
K SLABS - above 300 mm thick Rs. 164 Rs. 137 Rs. 301 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams with Rs. 553 Rs. 462 Rs. 1015 per 1 sqm
Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 387 Rs. 324 Rs. 711 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 1526 Rs. 1276 Rs. 2802 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 1547 Rs. 1294 Rs. 2841 per 1 cum
P DOME SLABS Rs. 2467 Rs. 2063 Rs. 4530 per 1 cum
Q HELICAL STAIRCASES Rs. 188 Rs. 157 Rs. 345 per 1 sqm
R SHEAR WALLS, RCC WALLS, WATER DELETED
TANK WALLS
Centring
Material Hire Labour Charges for Unit of
Sl NAME OF THE STRUCTURAL MEMBER charges charges 2017-18 Measurement
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area)
A 1st - Floor Rs. 9.93 Rs. 61.83 Rs. 71.76 per 1 sqm
B 2nd - Floor Rs. 9.93 Rs. 87.78 Rs. 97.71 per 1 sqm
C 3rd - Floor Rs. 9.93 Rs. 113.7 Rs. 123.67 per 1 sqm
D 4th - Floor Rs. 9.93 Rs. 139.7 Rs. 149.62 per 1 sqm
E 5th - Floor Rs. 9.93 Rs. 165.6 Rs. 175.57 per 1 sqm
F 6th - Floor Rs. 9.93 Rs. 191.6 Rs. 201.52 per 1 sqm
G 7th - Floor Rs. 9.93 Rs. 217.5 Rs. 227.47 per 1 sqm
H 8th - Floor Rs. 9.93 Rs. 243.5 Rs. 253.43 per 1 sqm
I 9th - Floor Rs. 9.93 Rs. 269.5 Rs. 279.38 per 1 sqm
J 10th - Floor Rs. 9.93 Rs. 295.4 Rs. 305.33 per 1 sqm
K 11th - Floor Rs. 9.93 Rs. 321.4 Rs. 331.28 per 1 sqm
L 12th - Floor Rs. 9.93 Rs. 347.3 Rs. 357.23 per 1 sqm
105
Building SoR: 2017-18 (Civil & Electrical)
M 13th - Floor Rs. 9.93 Rs. 373.3 Rs. 383.19 per 1 sqm
N 14th - Floor Rs. 9.93 Rs. 399.2 Rs. 409.14 per 1 sqm
O 15th - Floor Rs. 9.93 Rs. 425.2 Rs. 435.09 per 1 sqm
Centring
Material Hire Labour Unit of
Sl NAME OF THE STRUCTURAL MEMBER Charges for
charges charges Measurement
2015-16
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for PLASTERING to WALLS - 1 sqm
A 1st - Floor Rs. 0.99 Rs. 6.18 Rs. 7.17 per 1 sqm
B 2nd - Floor Rs. 0.99 Rs. 8.78 Rs. 9.77 per 1 sqm
C 3rd - Floor Rs. 0.99 Rs. 11.37 Rs. 12.36 per 1 sqm
D 4th - Floor Rs. 0.99 Rs. 13.97 Rs. 14.96 per 1 sqm
E 5th - Floor Rs. 0.99 Rs. 16.56 Rs. 17.55 per 1 sqm
F 6th - Floor Rs. 0.99 Rs. 19.16 Rs. 20.15 per 1 sqm
G 7th - Floor Rs. 0.99 Rs. 21.75 Rs. 22.74 per 1 sqm
H 8th - Floor Rs. 0.99 Rs. 24.35 Rs. 25.34 per 1 sqm
I 9th - Floor Rs. 0.99 Rs. 26.94 Rs. 27.93 per 1 sqm
J 10th - Floor Rs. 0.99 Rs. 29.54 Rs. 30.53 per 1 sqm
K 11th - Floor Rs. 0.99 Rs. 32.14 Rs. 33.13 per 1 sqm
L 12th - Floor Rs. 0.99 Rs. 34.73 Rs. 35.72 per 1 sqm
M 13th - Floor Rs. 0.99 Rs. 37.33 Rs. 38.32 per 1 sqm
N 14th - Floor Rs. 0.99 Rs. 39.92 Rs. 40.91 per 1 sqm
O 15th - Floor Rs. 0.99 Rs. 42.52 Rs. 43.51 per 1 sqm
HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm
A 1st - Floor Rs. 2.37 Rs. 12.55 Rs. 14.92 per 1 sqm
B 2nd - Floor Rs. 2.37 Rs. 17.64 Rs. 20.01 per 1 sqm
C 3rd - Floor Rs. 2.37 Rs. 22.73 Rs. 25.1 per 1 sqm
D 4th - Floor Rs. 2.37 Rs. 27.82 Rs. 30.19 per 1 sqm
E 5th - Floor Rs. 2.37 Rs. 32.91 Rs. 35.28 per 1 sqm
F 6th - Floor Rs. 2.37 Rs. 38 Rs. 40.37 per 1 sqm
G 7th - Floor Rs. 2.37 Rs. 43.08 Rs. 45.45 per 1 sqm
H 8th - Floor Rs. 2.37 Rs. 48.17 Rs. 50.54 per 1 sqm
I 9th - Floor Rs. 2.37 Rs. 53.26 Rs. 55.63 per 1 sqm
J 10th - Floor Rs. 2.37 Rs. 58.35 Rs. 60.72 per 1 sqm
K 11th - Floor Rs. 2.37 Rs. 63.44 Rs. 65.81 per 1 sqm
L 12th - Floor Rs. 2.37 Rs. 68.53 Rs. 70.9 per 1 sqm
M 13th - Floor Rs. 2.37 Rs. 73.62 Rs. 75.99 per 1 sqm
N 14th - Floor Rs. 2.37 Rs. 78.71 Rs. 81.08 per 1 sqm
O 15th - Floor Rs. 2.37 Rs. 83.8 Rs. 86.17 per 1 sqm
106
Building SoR: 2017-18 (Civil &
Electrical)
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 3.66 M
SLAB
S- WAFFLE
SLAB ARCH
SLAB above - (GRID) ARCH
S- PERGOLA BEAM
S - Up 150 SLABS BEAM
LINTEL CHAJJAS - above SLABS S- DOME HELICAL
FLOOR COLUMNS BEAMS to 150 mm - (Rib S - up
S SUNSHADES 300 (Only Rib above SLABS STAIRCASES
mm Up to Beams to 1.5
mm Beams) 1.5 M
thick 300 with M Span
thick Span
mm Slabs)
thick
Material Hire for any Floor H 1133 224 341 2002 227 233 244 824 578 2276 2308 3681 280
Labour Charges for 1st Floor L 1211 186 1700 1426 162 166 174 587 412 1621 1644 2621 200
Total Hire Charges (H+L) T 2344 410 2041 3428 389 399 418 1411 990 3897 3952 6302 480
1st - Floor L 1211 186 1700 1426 162 166 174 587 412 1621 1644 2621 200
2nd - Floor L 1332 205 1870 1569 178 183 191 646 453 1783 1808 2883 220
3rd - Floor L 1453 223 2040 1711 194 199 209 704 494 1945 1973 3145 240
4th - Floor L 1574 242 2210 1854 211 216 226 763 536 2107 2137 3407 260
5th - Floor L 1695 260 2380 1996 227 232 244 822 577 2269 2302 3669 280
6th - Floor L 1817 279 2550 2139 243 249 261 881 618 2432 2466 3932 300
7th - Floor L 1938 298 2720 2282 259 266 278 939 659 2594 2630 4194 320
8th - Floor L 2059 316 2890 2424 275 282 296 998 700 2756 2795 4456 340
9th - Floor L 2180 335 3060 2567 292 299 313 1057 742 2918 2959 4718 360
10th - Floor L 2301 353 3230 2709 308 315 331 1115 783 3080 3124 4980 380
11th - Floor L 2422 372 3400 2852 324 332 348 1174 824 3242 3288 5242 400
12th - Floor L 2543 391 3570 2995 340 349 365 1233 865 3404 3452 5504 420
13th - Floor L 2664 409 3740 3137 356 365 383 1291 906 3566 3617 5766 440
14th - Floor L 2785 428 3910 3280 373 382 400 1350 948 3728 3781 6028 460
15th - Floor L 2906 446 4080 3422 389 398 418 1409 989 3890 3946 6290 480
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above 3.66 M may be allowed at 16.666%
more than the basic material hire charges and relevant labour charges of the applicable floor and item
107
Building SoR: 2017-18 (Civil &
Electrical)
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel Centring Plates etc., for
unsupported height 3.66 M
FLOOR LINTEL CHAJJAS - COLUMN BEAMS SLAB SLAB SLAB WAFFL PERGOLA ARCH ARCH DOME HELICAL
S SUNSHADE S S - Up S- S- E- SLABS BEAM BEAM SLABS STAIRCASE
S to 150 above above (GRID) (Only Rib S - up S- S
mm 150 300 SLABS Beams) to 1.5 above
thick mm - mm (Rib M Span 1.5 M
Up to thick Beams Span
300 with
mm Slabs)
thick
Material Hire for any Floor H 760 150 229 1342 152 156 164 553 387 1526 1547 2467 188
Labour Charges for 1st Floor L 953 146 1338 1122 127 131 137 462 324 1276 1294 2063 157
Total Hire Charges (H+L) T 1713 296 1567 2464 279 287 301 1015 711 2802 2841 4530 345
1st - Floor L 953 146 1338 1122 127 131 137 462 324 1276 1294 2063 157
2nd - Floor L 1048 161 1472 1234 140 144 151 508 356 1404 1423 2269 173
3rd - Floor L 1144 175 1606 1346 152 157 164 554 389 1531 1553 2476 188
4th - Floor L 1239 190 1739 1459 165 170 178 601 421 1659 1682 2682 204
5th - Floor L 1334 204 1873 1571 178 183 192 647 454 1786 1812 2888 220
6th - Floor L 1430 219 2007 1683 191 197 206 693 486 1914 1941 3095 236
7th - Floor L 1525 234 2141 1795 203 210 219 739 518 2042 2070 3301 251
8th - Floor L 1620 248 2275 1907 216 223 233 785 551 2169 2200 3507 267
9th - Floor L 1715 263 2408 2020 229 236 247 832 583 2297 2329 3713 283
10th - Floor L 1811 277 2542 2132 241 249 260 878 616 2424 2459 3920 298
11th - Floor L 1906 292 2676 2244 254 262 274 924 648 2552 2588 4126 314
12th - Floor L 2001 307 2810 2356 267 275 288 970 680 2680 2717 4332 330
13th - Floor L 2097 321 2944 2468 279 288 301 1016 713 2807 2847 4539 345
14th - Floor L 2192 336 3077 2581 292 301 315 1063 745 2935 2976 4745 361
15th - Floor L 2287 350 3211 2693 305 314 329 1109 778 3062 3106 4951 377
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above 3.66 M may be allowed at
16.666% more than the basic material hire charges and relevant labour charges of the applicable floor and item
108
Building SoR: 2017-18 (Civil & Electrical)
Sl. No SECTION NAMES OF THE ITEMS NAMES OF THE BRAND / MANUFACTURER / SUPPLIER
Note: 1) All Building Materials conforming to ISI Standards shall be used in all CIVIL, Water Supply & Sanitary Fitings and Electrical
Works.
2) Not only limiting to the Brand / Manufacturer / Supplier for Materials/Products mentioned above, Material / Product conforming to the
Specification and Standards of ISI from any Brand / Manufacturer, shall also be allowed in all CIVIL, Water Supply & Sanitary Fitings
and Electrical Works also.
109
Building SoR: 2017-18 (Civil & Electrical)
WATER SUPPLY
&
SANITARY ITEMS
110
Building SoR: 2017-18 (Civil & Electrical)
111
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
14 BMW-A.14 b) - do - labour charges only 1 RM 51
Supply of SWG SP-1 Pipe conforming to ISI 651- 4" dia
15 BMW-A.15 1 RM 153
(101.6mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 6" dia
16 BMW-A.16 1 RM 266
(152.4mm)
Supply of SWG SP-1 Pipe conforming to ISI 651-8" dia
17 BMW-A.17 1 RM 411
(203.2mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 10" dia (254
18 BMW-A.18 1 RM 752
mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 12" dia (300
19 BMW-A.19 1 RM 1084
mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 14" dia (350
20 BMW-A.20 1 RM 1475
mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 16" dia (400
21 BMW-A.21 1 RM 1778
mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 18" dia (450
22 BMW-A.22 1 RM 2147
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 4" dia
23 BMW-A.23 1 RM 189
(101.6mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 6" dia
24 BMW-A.24 1 RM 281
(152.4mm)
Supply of SWG SP-2 Pipe conforming to ISI 651-8" dia
25 BMW-A.25 1 RM 507
(203.2mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 10" dia (254
26 BMW-A.26 1 RM 797
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 12" dia (300
27 BMW-A.27 1 RM 1224
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 14" dia (350
28 BMW-A.28 1 RM 1587
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 16" dia (400
29 BMW-A.29 1 RM 1828
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 18" dia (450
30 BMW-A.30 1 RM 2333
mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 4" dia
31 BMW-A.31 1 RM 241
(101.6mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 6" dia
32 BMW-A.32 1 RM 351
(152.4mm)
Supply of SWG SP-3 Pipe conforming to ISI 651-8" dia
33 BMW-A.33 1 RM 621
(203.2mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 10" dia (254
34 BMW-A.34 1 RM 944
mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 12" dia (300
35 BMW-A.35 1 RM 1319
mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 14" dia (350
36 BMW-A.36 1 RM 1675
mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 16" dia (400
37 BMW-A.37 1 RM 1928
mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 18" dia (450
38 BMW-A.38 1 RM 2623
mm)
Supply of SWG Bends conforming to IS standards -100 mm
39 BMW-A.39 Each 77
dia
112
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of SWG Bends conforming to IS standards -150 mm
40 BMW-A.40 Each 142
dia
Supply of SWG Bends conforming to IS standards -200 mm
41 BMW-A.41 Each 268
dia
Supply of SWG Bends conforming to IS standards -250 mm
42 BMW-A.42 Each 544
dia
Supply of SWG Bends conforming to IS standards -300 mm
43 BMW-A.43 Each 691
dia
Supply of SWG Bends conforming to IS standards -350 mm
44 BMW-A.44 Each 863
dia
Supply of SWG Junctions (T's & Y's) conforming to IS
45 BMW-A.45 Each 148
standards with length of barrel 60 cm for - 100 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
46 BMW-A.46 Each 218
standards with length of barrel 60 cm for - 150 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
47 BMW-A.47 Each 238
standards with length of barrel 60 cm for - 150 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS
48 BMW-A.48 Each 339
standards with length of barrel 60 cm for - 200 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
49 BMW-A.49 Each 396
standards with length of barrel 60 cm for - 200 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS
50 BMW-A.50 Each 455
standards with length of barrel 60 cm for - 200 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS
51 BMW-A.51 Each 534
standards with length of barrel 60 cm for - 250 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
52 BMW-A.52 Each 705
standards with length of barrel 60 cm for - 250 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS
53 BMW-A.53 Each 873
standards with length of barrel 60 cm for - 250 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS
54 BMW-A.54 Each 1045
standards with length of barrel 60 cm for - 250 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS
55 BMW-A.55 Each 762
standards with length of barrel 60 cm for - 300 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
56 BMW-A.56 Each 976
standards with length of barrel 60 cm for - 300 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS
57 BMW-A.57 Each 1189
standards with length of barrel 60 cm for - 300 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS
58 BMW-A.58 Each 1404
standards with length of barrel 60 cm for - 300 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS
59 BMW-A.59 Each 1618
standards with length of barrel 60 cm for - 300 x 300
Supply of SWG Junctions (T's & Y's) conforming to IS
60 BMW-A.60 Each 951
standards with length of barrel 60 cm for - 350 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS
61 BMW-A.61 Each 1219
standards with length of barrel 60 cm for - 350 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS
62 BMW-A.62 Each 1487
standards with length of barrel 60 cm for - 350 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS
63 BMW-A.63 Each 1752
standards with length of barrel 60 cm for - 350 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS
64 BMW-A.64 Each 2021
standards with length of barrel 60 cm for - 350 x 300
Supply of SWG Junctions (T's & Y's) conforming to IS
65 BMW-A.65 Each 2287
standards with length of barrel 60 cm for - 350 x 350
113
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of SWG Plugs conforming to IS standards for 100 mm
66 BMW-A.66 Each 28
dia
Supply of SWG Plugs conforming to IS standards for 150 mm
67 BMW-A.67 Each 53
dia
Supply of SWG Plugs conforming to IS standards for 200 mm
68 BMW-A.68 Each 102
dia
Supply of SWG Plugs conforming to IS standards for 250 mm
69 BMW-A.69 Each 176
dia
Supply of SWG Plugs conforming to IS standards for 300 mm
70 BMW-A.70 Each 279
dia
Supply of SWG Plugs conforming to IS standards for 350 mm
71 BMW-A.71 Each 350
dia
Supplying & fixing 150 mm x 100 mm SWG gully
trapsconforming to ISI 651 & 4127 with C.I Grating & Cost.
72 BMW-A.72 Brick masonry in CM 1:6 prop. Intermediate chamber and Each 485
fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and
hinged cover
Supply of SWG Gully Traps (Round & Square) conforming to
73 BMW-A.73 Each 220
IS standards 150 x 100 mm
Labour charges for fixing and laying the SWG Junctions/
74 BMW-A.74 Plugs/ Bends of any dia with airtight cement joints as per Each 30
standard practice
Supply of SWG Saddles conforming to IS standards 150 x
75 BMW-A.75 156
100 mm
Supply of SWG Saddles conforming to IS standards 200 x
76 BMW-A.76 268
100 mm
Supply of SWG Saddles conforming to IS standards 250 x
77 BMW-A.77 434
100 mm
MAN HOLES & INSPECTION CHAMBERS -AS PER - IS
B
4111 : Part 1 : 1986
Constructing 904.0 mm (3’0”) dia solid block masonry
inspection chamber as per IS - 4111: Part-1:1986 with cement
mortar (1:6) prop usingfly-ash blocks of 225 mm thick from
approved source having a minimum crushing strength of 10
N/sq.mmincluding plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
904 mm (3'-0") in all sorts of soils (excluding rock) and laying
78 BMW-B.01 cement concrete (1:4:8) 150 mm thick using 40 mm HBG Each 5697
Metal and P.C.C. 1:2:4 benching and channel 100 mm thick
as per Standard specification andincluding cost and
conveyance of all materials like cement, sand, bricks, water
etc., to site, cost of seigniorage charges on all materials and
all incidental andoperational, labour charges like mixing
cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard
specification.
Constructing 904.0 mm (3’0”) dia solid block masonry
inspection chamber as per IS - 4111: Part-1:1986 with cement
mortar (1:6) prop usingfly-ash blocks of 225 mm thick from
approved source having a minimum crushing strength of 10
79 BMW-B.02 Each 8965
N/sq.mmincluding plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (excluding rock) and laying
114
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
cement concrete (1:4:8) 150 mm thick using 40 mm HBG
Metal and P.C.C. 1:2:4 benching and channel 100 mm thick
as per Standard specification andincluding cost and
conveyance of all materials like cement, sand, bricks, water
etc., to site, cost of seigniorage charges on all materials and
all incidental andoperational, labour charges like mixing
cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard
specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mmincluding plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
904 mm (3'-0") in all sorts of soils (excluding rock) and laying
80 BMW-B.03 cement concrete (1:4:8) 150 mm thick using 40 mm HBG Each 5518
Metal and P.C.C. 1:2:4 benching and channel 100 mm thick
as per Standard specification andincluding cost and
conveyance of all materials like cement, sand, bricks, water
etc., to site, cost of seigniorage charges on all materials and
all incidental andoperational, labour charges like mixing
cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard
specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mmincluding plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (excluding rock) and laying
81 BMW-B.04 cement concrete (1:4:8) 150 mm thick using 40 mm HBG Each 8619
Metal and P.C.C. 1:2:4 benching and channel 100 mm thick
as per Standard specification andincluding cost and
conveyance of all materials like cement, sand, bricks, water
etc., to site, cost of seigniorage charges on all materials and
all incidental andoperational, labour charges like mixing
cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard
specification.
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM
1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0")
82 BMW-B.05 Each 5372
and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6")
C.I frame andcover of 40 Kg.
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM
1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0")
83 BMW-B.06 Each 3238
and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6")
C.I frame andcover of 20 Kg.
a)Making drainage connection in the existing inspection
84 BMW-B.07 Each 107
including all repairs
85 BMW-B.08 b) - do - labour charges only Each 71
C.I. PIPES & FITTINGS -AS PER - IS 1729:1979 (Materials
C shall be procured from the list of approved Brands/
Manufacturers/ Suppliers)
115
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supplying and fixing of C.I. Single/ Double Socket soil pipes
ISI marked conforming to IS:1729-1979 of reputed make with
cement caulked joints and fixing as per site requirements
including painting black with Japan paint and fixing with
necessary wooden blocks fixed in the masonry walls in
cement mortar (1½:1) and including fixing of M.S. clamps if
necessary with required no. of Bombay nails etc., complete
86 BMW-C.01 3" dia (76.2 mm) Single Socket 1 RM 678
87 BMW-C.02 4" dia (101.6mm) Single Socket 1 RM 880
88 BMW-C.03 6" dia (152.4mm) Single Socket 1 RM 1388
89 BMW-C.04 3" dia (76.2 mm) Double Socket 1 RM 738
90 BMW-C.05 4" dia (101.6mm) Double Socket 1 RM 974
91 BMW-C.06 6" dia (152.4mm) Double Socket 1 RM 1593
Labour charges only forfixing of C.I. Single/ Double Socket
soil pipes of any dia with cement caulked joints and fixing as
per site requirements including painting black with Japan paint
92 BMW-C.07 1 RM 227
and fixing with necessary wooden blocks fixed in the masonry
walls in cement mortar and including fixing of M.S. clamps if
necessary with required nails
Supplying & fixing CI Plain bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
93 BMW-C.08 Each 262
fixing as per site requirements with standard practice for3" dia
(76.2 mm)
Supplying & fixing CI Plain bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
94 BMW-C.09 Each 329
fixing as per site requirements with standard practice for4" dia
(101.6 mm)
Supplying & fixing CI Plain bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
95 BMW-C.10 Each 539
fixing as per site requirements with standard practice for6" dia
(152.4 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
96 BMW-C.11 Each 322
fixing as per site requirements with standard practice for 3"
dia (76.2 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
97 BMW-C.12 Each 396
fixing as per site requirements with standard practice for 4"
dia (101.6 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI marked
conforming to IS:1729-1979 with cement caulked joints and
98 BMW-C.13 Each 853
fixing as per site requirements with standard practice for 6"
dia (152.4 mm)
Labour charges only for fixing CI Plain/ Plug (Door) bends
99 BMW-C.14 with cement caulked joints and fixing as per site requirements Each 72
with standard practice
Supplying and fixing of 76.2 mm (3") CI soil single junction
100 BMW-C.15 with plug : conforming to IS:1729-1979 with cement caulked Each 407
joints and fixing
Supplying and fixing of 101.6 mm (4") CI soil single junction
101 BMW-C.16 with plug : conforming to IS:1729-1979 with cement caulked Each 628
joints and fixing
Supplying and fixing of 152.4 mm (6") CI soil single junction
102 BMW-C.17 Each 1467
with plug : conforming to IS:1729-1979 with cement caulked
116
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
joints and fixing
Supplying and fixing of 76.2 mm (3") CI soil plain single
103 BMW-C.18 junction : conforming to IS:1729-1979 with cement caulked Each 344
joints and fixing
Supplying and fixing of 101.6 mm (4") CI soil plain single
104 BMW-C.19 junction : conforming to IS:1729-1979 with cement caulked Each 465
joints and fixing
Supplying and fixing of 152.4 mm (6") CI soil plain single
105 BMW-C.20 junction : conforming to IS:1729-1979 with cement caulked Each 1096
joints and fixing
Labour charges only fixing CI soil single junctions with cement
106 BMW-C.21 caulked joints and fixing as per site requirements with Each 101
standard practice
Supplying and Fixing of 76.2 mm (3") CI soil Double junction
107 BMW-C.22 with plug : conforming to IS:1729-1979 with cement caulked Each 611
joints and fixing
Supplying and Fixing of 101.6 mm (4") CI soil Double junction
108 BMW-C.23 with plug : conforming to IS:1729-1979 with cement caulked Each 739
joints and fixing
Supplying and Fixing of 152.4 mm (6") CI soil Double junction
109 BMW-C.24 with plug : conforming to IS:1729-1979 with cement caulked Each 1707
joints and fixing
Supplying and Fixing of 76.2 mm (3") CI soil plain Double
110 BMW-C.25 junction : conforming to IS:1729-1979 with cement caulked Each 530
joints and fixing
Supplying and Fixing of 101.6 mm (4") CI soil plain Double
111 BMW-C.26 junction : conforming to IS:1729-1979 with cement caulked Each 691
joints and fixing
Supplying and Fixing of 152.4 mm (6") CI soil plain Double
112 BMW-C.27 junction : conforming to IS:1729-1979 with cement caulked Each 1600
joints and fixing
Labour charges only fixing CI soil Double junctions with
113 BMW-C.28 cement caulked joints and fixing as per site requirements with Each 98
standard practice
Supplying and Fixing of 75mm C.I. Offsets Ist quality
114 BMW-C.29 conforming to IS:1729-1979 with cement caulked joints and Each 259
fixing-for 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 75mm C.I. Offsets Ist quality
115 BMW-C.30 conforming to IS:1729-1979 with cement caulked joints and Each 360
fixing-for 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 75mm C.I. Offsets Ist quality
116 BMW-C.31 conforming to IS:1729-1979 with cement caulked joints and Each 776
fixing-for 152.4 mm (6") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality
117 BMW-C.32 conforming to IS:1729-1979 with cement caulked joints and Each 307
fixing- for 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality
118 BMW-C.33 conforming to IS:1729-1979 with cement caulked joints and Each 406
fixing- for 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality
119 BMW-C.34 conforming to IS:1729-1979 with cement caulked joints and Each 795
fixing- for 152.4 mm (6") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality
120 BMW-C.35 Each 354
conforming to IS:1729-1979 with cement caulked joints and
117
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
fixingfor 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality
121 BMW-C.36 conforming to IS:1729-1979 with cement caulked joints and Each 456
fixingfor 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality
122 BMW-C.37 conforming to IS:1729-1979 with cement caulked joints and Each 923
fixing for 152.4 mm (6") C.I. Pipe
Labour charges only fixing CI soil Offsets with cement caulked
123 BMW-C.38 joints and fixing as per site requirements with standard Each 45
practice
Supplying & fixing CI floor traps 1st quality ISI marked
conforming to IS:1729-1979 with C.P. Grating fixing with white
124 BMW-C.39 cement as per site requirements with standard practicefor Each 465
nominal dia 75 mm (3") and grating size 165 mm dia of weight
not less than 5.5 Kgs
Supplying & fixing CI floor traps 1st quality ISI marked with
C.P. Grating fixing with white cement as per site requirements
125 BMW-C.40 Each 568
with standard practicefornominal dia 100 mm (4") and grating
size 100 mm dia of weight not less than 6 Kgs
Supplying & fixing CI floor traps 1st quality ISI marked
conforming to IS:1729-1979 with C.P. Grating fixing with white
126 BMW-C.41 cement as per site requirements with standard practicefor Each 288
nominal dia 75 mm (3") and grating size 100 mm dia of weight
not less than 4.0 Kgs
Labour charges only for fixing CI Nahany/ Floor traps with
127 BMW-C.42 C.P. Grating fixing with white cement as per site requirements Each 50
with standard practice
128 BMW-C.43 Boxing of Nahany traps in RCC floors Each 162
129 BMW-C.44 Boxing of W.C Trap in R.C.C floors Each 324
Supplying & fixing CI Collars (double socket) Ist quality ISI
marked conforming to IS:1729-1979 with cement caulked
130 BMW-C.45 Each 153
joints and fixing as per site requirements with standard
practice for 76.20 mm (3") C.I. Pipe
Supplying & fixing CI Collars (double socket) Ist quality ISI
marked conforming to IS:1729-1979 with cement caulked
131 BMW-C.46 Each 192
joints and fixing as per site requirements with standard
practice for 101.6 mm (4") C.I. Pipe
Supplying & fixing CI Collars (double socket) Ist quality ISI
marked conforming to IS:1729-1979 with cement caulked
132 BMW-C.47 Each 552
joints and fixing as per site requirements with standard
practice for 152.4 mm (6") C.I. Pipe
VITREOUS CHINAWARE - SANITARY APPLIANCES as per
D IS:2556 – 1974 (Materials shall be procured from the list of
approved Brands/ Manufacturers/ Suppliers)
Supplying & Fixing Indian pattern white glazed W.C 1st quality
133 BMW-D.01 ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" Each 934
trap: 580 mm Long
Supplying & Fixing Indian pattern white glazed W.C 1st quality
134 BMW-D.02 ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" Each 934
trap: 630 mm Long
Labour charges only for fixing Indian patternW.C with"P" or
135 BMW-D.03 Each 302
"S" trap
Supplying & Fixing Orissa Pan white glazed W.C 1st quality
136 BMW-D.04 Each 1399
ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S"
118
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
trap: 580 mm x 440 mm
Supplying & Fixing Orissa Pan white glazed W.C 1st quality
137 BMW-D.05 ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" Each 1467
trap: 630 mm x 450 mm
Labour charges only Fixing Orissa pan W.C with"P" or "S"
138 BMW-D.06 Each 377
trap
Supplying & Fixing porcelain foot rest for squatting I.W.C.
(Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick
139 BMW-D.07 Pair 215
each foot rest 1st quality ISI marked conforming to IS:2556-
Part-10:1974
Labour charges only for fixing porcelain foot rest for squatting
140 BMW-D.08 Pair 69
I.W.C. (Rectangular pair)
Providing Brick masonry seat for Orissa pan/ Indian W.C.
141 BMW-D.09 Each 278
using 2nd class bricks as per standard practice
Providing Cement Concrete Squatting plate for Orissa pan/
142 BMW-D.10 Each 83
Indian W.C. in P.C.C. 1:2:4 as per standard practice
Supplying & Fixing low down porcelain flushing tank 10 Lit
143 BMW-D.11 Each 2226
Capacitywith internal components
Labour charges only for fixing low down porcelain flushing
144 BMW-D.12 Each 528
tank with internal components
Supplying and Fixing European Water Closet of 1st quality
145 BMW-D.13 Each 1784
conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap
Supplying and Fixing European Water Closet of 1st quality
146 BMW-D.14 Each 1703
conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'S' trap
Labour charges only for fixing European Water Closet with 'P'
147 BMW-D.15 Each 264
or 'S' trap as per standard practice
Supplying and Fixingbest Indian make plastic seat and lid for
148 BMW-D.16 European water closets with rubber or plastic Buffers as per Each 766
IS 2548-1996
Labour charges only for fixing plastic seat and lid for
149 BMW-D.17 Each 76
European water closet
Supply, Installation and commissioning approved make floor
mounted Close coupled EWC suit CASCADE model 'P' or 'S'
trap with dual flush porcelain cistern fixed on EWC with all
internal parts of dual flush cistern, ultra solid seat cover of
150 BMW-D.18 Each 8260
approvedmake with rubber buffer and cap 15 mm angle stop
cock 450 mm long PVC inter connection pipe wall flanges all
of approved make etc. complete for finished item of work in all
respects:White Colour
Supply, Installation and commissioning approved make floor
mounted Close coupled EWC suit CASCADE model 'P' or 'S'
trap with dual flush porcelain cistern fixed on EWC with all
internal parts of dual flush cistern, ultra solid seat cover of
151 BMW-D.19 Each 12044
approvedmake with rubber buffer and cap 15 mm angle stop
cock 450 mm long PVC inter connection pipe wall flanges all
of approved make etc. complete for finished item of work in all
respects: Coloured - Grade - I/ Grade - II
Supply, Installation and commissioning approved make floor
mounted close coupled EWC suit CASCADE model 'P' or 'S'
trap with dual flush porcelain cistern fixed on EWC with all
152 BMW-D.20 internal parts of dual flush cistern, ultra solid seat cover of Each 15326
approvedmake with rubber buffer and cap 15 mm angle stop
cock 450 mm long PVC inter connection pipe wall flanges all
of approved make etc. complete for finished item of work in all
119
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
respects: Special Colour - Grade - III
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
153 BMW-D.21 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 2355
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 660 x 460 mm - Single C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
154 BMW-D.22 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 2091
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 630 x 450 mm - Single C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
155 BMW-D.23 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 2551
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 630 x 450 mm - Double C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
156 BMW-D.24 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 1566
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 550 x 400 mm - Single C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
157 BMW-D.25 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 1894
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 550 x 400 mm - Double C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
158 BMW-D.26 and fitted with 15 mm nominal bore Chromium Plated Pillar Each 1370
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 450 x 300 mm - Single C.P. Pillar
cock
Supplying & Fixing Indian makeFlat Back Wash Hand
159 BMW-D.27 Each 1764
Basin1st quality conforming to IS:2556-Part-4:1972 with
120
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
waste fittings like rubber plug, chain,32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-1979
and fitted with 15 mm nominal bore Chromium Plated Pillar
Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets
including wooden block: 450 x 300 mm - Double C.P. Pillar
cock
Labour charges only for fixing Indian makeFlat Back Wash
Hand Basin with waste fittings like rubber plug, chain,32 mm
160 BMW-D.28 Each 319
nominal size C.P. Fitting Pillar Taps complete with standard
CI brackets including wooden block
Supplying and Fixing Pedestal for Wash Hand Basin(H.S.W /
161 BMW-D.29 Each 1084
Parry / Earthenware)
162 BMW-D.30 Labour charges only for fixing pedestal for wash hand basin Each 136
Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type)
163 BMW-D.31 Each 390
Parryware or equivalent
Labour charges only for fixing bottle trap to the wash hand
164 BMW-D.32 Each 45
basin
Supplying & Fixing white glazed flat back Bowl urinals of size
440 mm x 265 mm x 315 mm with internal flushing rim fixed
165 BMW-D.33 Each 810
with screws complete Indian make conforming to IS:2556-
1995
Supplying & Fixing white glazed flat back half stall urinals 1st
quality conforming to IS:2556-1995 with standard C.P.
166 BMW-D.34 Spreader of overall size 95 x 95 x 57 mm conforming to Each 2385
IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian
make : 410 x 265 x 305 mm
Supplying & Fixing white glazed flat back half stall urinals 1st
quality conforming to IS:2556-1995 with standard C.P.
167 BMW-D.35 Spreader of overall size 95 x 95 x 57 mm conforming to Each 2647
IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian
make : 590 x 375 x 390 mm
Labour charges only Fixing flat back Bowl/ Half stall urinals
168 BMW-D.36 Each 127
with fixing C.P. Spreader and screws complete
Supplying & Fixing Indian make white glazed vitreous china
porcelain sink conforming to IS:2556-Part-5-1994 on
169 BMW-D.37 cantilever brackets with waste fittings like rubber plug, Each 4319
chain,32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 600 x 400 x 250
Supplying & Fixing Indian make white glazed vitreous china
porcelain sink conforming to IS:2556-Part-5-1994 on
170 BMW-D.38 cantilever brackets with waste fittings like rubber plug, Each 4844
chain,32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 750 x 450 x 250
Labour charges only for fixing Vitreous china porcelain sinks
171 BMW-D.39 Each 319
with waste fittings, rubber plug, chain, cantilever brackets etc.
a) S & F 609.6 x 457.2 x 254 mmRCC terrazzo finished
172 BMW-D.40 sink(or constructed at site with 50.8mm thick) brass plug and Each 704
chain including CI cantilever brackets
173 BMW-D.41 b) - do - labour charges only Each 225
TAPS & FAUCETS(Materials shall be procured from the list of
E
approved Brands/ Manufacturers/ Suppliers)
174 BMW-E.01 a) S & F 12.7 mm NP stop cock Indian makeheavy duty Each 406
175 BMW-E.02 b) - do - labour charges only Each 29
121
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
a) S & Fconcealed stop cock 12.7 mm (1/2") Indian Make
176 BMW-E.03 Each 465
heavy duty
177 BMW-E.04 b) - do - labour charges only Each 43
a) S & Fangle stop cock 12.7 mm diafirst quality Indian Make
178 BMW-E.05 Each 408
heavy duty
179 BMW-E.06 b) - do - labour charges only Each 43
180 BMW-E.07 a) S&F 12.7 mm N.P bib tap Indian make heavy dutys Each 349
181 BMW-E.08 b) - do - labour charges only Each 29
182 BMW-E.09 a) S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 223
183 BMW-E.10 b) - do - labour charges only Each 29
a)S & F 31.75 mm brass plumber Union best Indian first
184 BMW-E.11 Each 61
quality
185 BMW-E.12 b) - do - labour charges only Each 14
186 BMW-E.13 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 200
187 BMW-E.14 b) - do - labour charges only Each 29
188 BMW-E.15 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 177
189 BMW-E.16 b) - do - labour charges only Each 29
190 BMW-E.17 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 200
191 BMW-E.18 b) - do - labour charges only Each 29
192 BMW-E.19 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 177
193 BMW-E.20 b) - do - labour charges only Each 29
S & F CP Long body bib cock fancy type deluxe heavy duty
194 BMW-E.21 Each 547
12.7 mm dia Indian make
S & F CP Short body bib cock fancy type deluxeheavy duty
195 BMW-E.22 Each 525
12.7 mm dia Indian make
S & F 12.7mm heavy duty dia high neck pillar cock 1st quality
196 BMW-E.23 Each 994
Indian make
197 BMW-E.24 a)S & F 12.7 mm heavy duty NP Swan Neck Pillar cock Each 994
198 BMW-E.25 b) - do - labour charges only Each 41
199 BMW-E.26 a)S & F 12.7 mm heavy duty NP Sink cock Each 992
200 BMW-E.27 b) - do - labour charges only Each 35
S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian
201 BMW-E.28 Each 522
make
202 BMW-E.29 S&F 12.7 mm dia NP push cock Ist quality Each 234
203 BMW-E.30 S&F 12.7 mm dia NP lift cock Ist quality Each 205
a)S & F 38.1 mm C.Pwaste coupling Half or Full Thread 1st
204 BMW-E.31 Each 205
Quality Indian make Parryware or equivalent
205 BMW-E.32 b) - do - labour charges only Each 29
206 BMW-E.33 a) S & F 31.75 mm PVC bottle trap Each 125
207 BMW-E.34 b) - do - labour charges only Each 29
208 BMW-E.35 a)S& F 38.1 mm brass plumber union Each 61
209 BMW-E.36 b) - do - labour charges only Each 14
a)S & F 19.05 mm heavy duty NP stop cock Indian make with
210 BMW-E.37 Each 522
ISI mark
211 BMW-E.38 b) - do - labour charges only Each 29
G.I. PIPES & FITTINGS(Materials shall be procured from the
F
list of approved Brands/ Manufacturers/ Suppliers)
212 BMW-F.01 S& F GIunion 12.7 mm Ist Quality Each 38
122
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
213 BMW-F.02 S& F GIunion 19.05 mm Ist Quality Each 46
214 BMW-F.03 S& F GIunion 25.4 mm Ist Quality Each 70
215 BMW-F.04 S& F GIunion 31.75 mm Ist Quality Each 86
216 BMW-F.05 S& F GIunion 38.1 mm Ist Quality Each 103
217 BMW-F.06 S& F GIunion 50.8 mm Ist Quality Each 128
218 BMW-F.07 S& F GI connector 25.4 mm dia Each 76
219 BMW-F.08 S& F 12.7 mm GI 'T' A class Ist quality Each 47
220 BMW-F.09 S& F31.75mm dia GI bend Ist quality Each 70
221 BMW-F.10 S & F 31.75 mm dia GI 'T' 1st Quality Each 69
a) S & F 25.4 mm copper ball cock ith PVC ball Indian make
222 BMW-F.11 Each 404
ISI mark
223 BMW-F.12 b) - do - labour charges only Each 44
a) S & F 19.05 mm copper ball cock ith PVCball Indian make
224 BMW-F.13 Each 331
ISI mark
225 BMW-F.14 b) - do - labour charges only Each 41
a)S & F 12.7 mm copper ball cock ith PVC ball Indian make
226 BMW-F.15 Each 218
ISI mark
227 BMW-F.16 b) - do - labour charges only Each 44
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
228 BMW-F.17 Each 1051
- I, Indian make heavy type - 25 mm NB Size
229 BMW-F.18 b) - do - labour charges only Each 44
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
230 BMW-F.19 Each 733
- I, Indian make heavy type - 20 mm NB Size
231 BMW-F.20 b) - do - labour charges only Each 44
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
232 BMW-F.21 Each 545
- I, Indian make heavy type - 15 mm NB Size
233 BMW-F.22 b) - do - labour charges only Each 44
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
234 BMW-F.23 Each 1594
- I, Indian make heavy type - 32 mm NB Size
235 BMW-F.24 b) - do - labour charges only Each 39
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
236 BMW-F.25 Each 2155
- I, Indian make heavy type - 40 mm NB Size
237 BMW-F.26 b) - do - labour charges only Each 67
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
238 BMW-F.27 Each 3155
- I, Indian make heavy type - 50 mm NB Size
239 BMW-F.28 b) - do - labour charges only Each 90
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
240 BMW-F.29 Each 4868
- I, Indian make heavy type - 65 mm NB Size
241 BMW-F.30 b) - do - labour charges only Each 112
a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class
242 BMW-F.31 Each 7211
- I, Indian make heavy type - 80 mm NB Size
243 BMW-F.32 b) - do - labour charges only Each 133
a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
244 BMW-F.33 return) Valve as per IS-778 I-class heavy duty - 15 mm NB Each 406
Size
245 BMW-F.34 b) - do - labour charges only Each 56
a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
246 BMW-F.35 return) Valve as per IS-778 I-class heavy duty - 25 mm NB Each 919
Size
123
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
247 BMW-F.36 b) - do - labour charges only Each 67
a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
248 BMW-F.37 return) Valve as per IS-778 I-class heavy duty - 40 mm NB Each 1866
Size
249 BMW-F.38 b) - do - labour charges only Each 112
a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
250 BMW-F.39 return) Valve as per IS-778 I-class heavy duty - 50 mm NB Each 2548
Size
251 BMW-F.40 b) - do - labour charges only Each 112
a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
252 BMW-F.41 return) Valve as per IS-778 I-class heavy duty - 20 mm NB Each 589
Size
253 BMW-F.42 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
254 BMW-F.43 return) Valve as per IS-778 I-class heavy duty - 15 mm NB Each 383
Size
255 BMW-F.44 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
256 BMW-F.45 return) Valve as per IS-778 I-class heavy duty - 20 mm NB Each 496
Size
257 BMW-F.46 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
258 BMW-F.47 return) Valve as per IS-778 I-class heavy duty - 25 mm NB Each 745
Size
259 BMW-F.48 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
260 BMW-F.49 return) Valve as per IS-778 I-class heavy duty - 32 mm NB Each 1024
Size
261 BMW-F.50 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
262 BMW-F.51 return) Valve as per IS-778 I-class heavy duty - 40 mm NB Each 1236
Size
263 BMW-F.52 b) - do - labour charges only Each 54
a) Supplying & fixing Gunmetal (GM) Vertical Check (Non
264 BMW-F.53 return) Valve as per IS-778 I-class heavy duty - 50 mm NB Each 1955
Size
265 BMW-F.54 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
266 BMW-F.55 Spindle as per IS - Class - I, Indian make heavy type - 15 mm Each 411
NB Size
267 BMW-F.56 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
268 BMW-F.57 Spindle as per IS - Class - I, Indian make heavy type - 20 mm Each 534
NB Size
269 BMW-F.58 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
270 BMW-F.59 Spindle as per IS - Class - I, Indian make heavy type - 25 mm Each 780
NB Size
271 BMW-F.60 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
272 BMW-F.61 Spindle as per IS - Class - I, Indian make heavy type - 32 mm Each 1409
NB Size
124
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
273 BMW-F.62 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
274 BMW-F.63 Spindle as per IS - Class - I, Indian make heavy type - 40 mm Each 2111
NB Size
275 BMW-F.64 b) - do - labour charges only Each 54
a)S & F Gunmetal (GM) Ball valve with SS Ball and SS
276 BMW-F.65 Spindle as per IS - Class - I, Indian make heavy type - 50 mm Each 3674
NB Size
277 BMW-F.66 b) - do - labour charges only Each 54
a) S& F 15 mm Nominal Bore GI pipe Light Grade properties
278 BMW-F.67 & weight as per IS 1239 ISI mark with GI fittings including the 1 RM 162
cost of pipe & its fittings & labour charges complete
279 BMW-F.68 b) - do - labour charges only 1 RM 41
a) S& F 20 mm Nominal Bore GI pipe Light Grade properties
280 BMW-F.69 & weight as per IS 1239ISI mark with GI fittings including the 1 RM 185
cost of pipe & its fittings & labour charges complete
281 BMW-F.70 b) - do - labour charges only 1 RM 41
a) S& F 25 mm Nominal Bore GI pipe Light Grade properties
282 BMW-F.71 & weight as per IS 1239 ISI mark with GI fittings including the 1 RM 241
cost of pipe & its fittings & labour charges complete
283 BMW-F.72 b) - do - labour charges only 1 RM 41
a) S& F 32 mm Nominal Bore GI pipe Light Grade properties
284 BMW-F.73 & weight as per IS 1239ISI mark with GI fittings including the 1 RM 335
cost of pipe & its fittings & labour charges complete
285 BMW-F.74 b) - do - labour charges only 1 RM 41
a) S& F 40 mm Nominal Bore GI pipe Light Grade properties
286 BMW-F.75 & weight as per IS 1239 ISI mark with GI fittings including the 1 RM 376
cost of pipe & its fittings & labour charges complete
287 BMW-F.76 b) - do - labour charges only 1 RM 44
a) S& F 50 mm Nominal Bore GI pipe Light Grade properties
288 BMW-F.77 & weight as per IS 1239 ISI mark with GI fittings including the 1 RM 412
cost of pipe & its fittings & labour charges complete
289 BMW-F.78 b) - do - labour charges only 1 RM 67
a) S& F 15 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239 ISI mark with GI fittings
290 BMW-F.79 1 RM 179
including the cost of pipe & its fittings & labour charges
complete
291 BMW-F.80 b) - do - labour charges only 1 RM 41
a) S& F 20 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239ISI mark with GI fittings
292 BMW-F.81 1 RM 198
including the cost of pipe & its fittings & labour charges
complete
293 BMW-F.82 b) - do - labour charges only 1 RM 41
a) S& F 25 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239ISI mark with GI fittings
294 BMW-F.83 1 RM 258
including the cost of pipe & its fittings & labour charges
complete
295 BMW-F.84 b) - do - labour charges only 1 RM 41
a) S& F 32 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239ISI mark with GI fittings
296 BMW-F.85 1 RM 359
including the cost of pipe & its fittings & labour charges
complete
125
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
297 BMW-F.86 b) - do - labour charges only 1 RM 41
a) S& F 40 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239 ISI mark with GI fittings
298 BMW-F.87 1 RM 401
including the cost of pipe & its fittings & labour charges
complete
299 BMW-F.88 b) - do - labour charges only 1 RM 44
a) S& F 50 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239 ISI mark with GI fittings
300 BMW-F.89 1 RM 436
including the cost of pipe & its fittings & labour charges
complete
301 BMW-F.90 b) - do - labour charges only 1 RM 67
S & F 65 mm Nominal Bore GI pipe Medium Grade
properties & weight as per IS 1239 with GI fittings such as
elbows tees couplings, nipples, plugs including excavation for
302 BMW-F.91 1 RM 755
trenches and refilling the trenches complete except for GI
bends union and GI connectors with checkout and socket
Tata or Zenith make or equivalent.
303 BMW-F.92 a)S & F 12.7 mm holder bat clamps Each 12
304 BMW-F.93 b) - do - labour charges only Each 8
305 BMW-F.94 a)S & F 19.05 mm holder bat clamps Each 19
306 BMW-F.95 b) - do - labour charges only Each 8
307 BMW-F.96 a)S & F 25.4 mm holder bat clamps Each 25
308 BMW-F.97 b) - do - labour charges only Each 8
309 BMW-F.98 a)S & F 38.1 mm holder bat clamps Each 28
310 BMW-F.99 b) - do - labour charges only Each 9
311 BMW-F.100 a) S& F12.7x 152.0 mm NP shower rose heavy Each 161
312 BMW-F.101 b) - do - labour charges only Each 20
313 BMW-F.102 a) S& F12.7x 137.0 mm NP shower rose heavy Each 155
314 BMW-F.103 b) - do - labour charges only Each 22
315 BMW-F.104 a) S& F12.7x 101.6 mm NP shower rose heavy Each 147
316 BMW-F.105 b) - do - labour charges only Each 22
317 BMW-F.106 a) S & F 12.7 x 88.9 CP fancy shower Each 260
318 BMW-F.107 b) - do - labour charges only Each 22
a) Supplying & fixing 12.7 mm GI drain pipe with plug for
319 BMW-F.108 Each 43
tanks (Mud valve) including making a hole
320 BMW-F.109 b) - do - labour charges only Each 22
a) Supplying & fixing 19.05 mm GI drain pipe with plug for
321 BMW-F.110 Each 61
tanks (Mud valve) including making a hole
322 BMW-F.111 b) - do - labour charges only Each 21
a) Supplying & fixing 25.4 mm GI drain pipe with plug for
323 BMW-F.112 Each 72
tanks (Mud valve) including making a hole
324 BMW-F.113 b) - do - labour charges only Each 24
a) Taking branch water connection from the existing 25.4 mm
325 BMW-F.114 Each 138
GIpipe including cutting threading, etc, complete with fitting
326 BMW-F.115 b) - do - labour charges only Each 41
a) Taking branch water connection from the existing 19.05
327 BMW-F.116 mm GIpipe including cutting threading, etc, complete with Each 80
fitting,
328 BMW-F.117 b) - do - labour charges only Each 36
329 BMW-F.118 a) Taking branch water connection from the existing 12.7 mm Each 61
126
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
GIpipe including cutting threading, etc, complete with fitting,
330 BMW-F.119 b) - do - labour charges only Each 31
Supplying & fixing leather washers for 12.7 mm bib tap and
331 BMW-F.120 Each 1
stop cock
Supplying & fixing leather washers for 19.05 mm bib tap and
332 BMW-F.121 Each 3
stop cock
333 BMW-F.122 Supplying & Fixing 12.7 mm fibre washers Each 3
334 BMW-F.123 Supplying & Fixing 19.05 mm fibre washers Each 3
PVC PIPES & FITTINGS(Materials shall be procured from the
G
list of approved Brands/ Manufacturers/ Suppliers)
a) Providing & Placing on Terrace(at all floor levels)
polyethylene water storage tank with Double layer approved
335 BMW-G.01 brand & manufacture with cover and suitable locking 1 Lit 5
arrangement & making necessary holes for inlet & outlets and
over flow pipes but without fittings & base support for tanks
336 BMW-G.02 b) - do - labour charges only 1 Lit 1
337 BMW-G.03 Supply of Plastic storage tank lid with hinges Each 64
338 BMW-G.04 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 41
Supply & fixing 31.75mm dia PVC flexible waste pipe of 914.4
339 BMW-G.05 Each 22
mm length of Ist quality
340 BMW-G.06 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 77
341 BMW-G.07 Supply & fixing Fancy PVC shelf including all fittings Each 183
Supply & fixing of PVC low level systemwith internal
342 BMW-G.08 Each 1254
components & short bend:10 Litres capacity Single Flush
Supply & fixing of PVC low level systemwith internal
343 BMW-G.09 Each 1472
components & short bend:10 litres capacity Dual Flush
Supply & fixing of PVC low level systemwith internal
344 BMW-G.10 Each 709
components & short bend:8 Litres capacity single Flush
345 BMW-G.11 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 216
346 BMW-G.12 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 343
347 BMW-G.13 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 410
348 BMW-G.14 75 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 244
349 BMW-G.15 90 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 389
350 BMW-G.16 110 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 476
75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe -
351 BMW-G.17 Each 152
4 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe -
352 BMW-G.18 Each 234
4 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe
353 BMW-G.19 Each 291
- 4 Kg/sq.cm
75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe -
354 BMW-G.20 Each 162
4 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe -
355 BMW-G.21 Each 249
4 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe
356 BMW-G.22 Each 301
- 4 Kg/sq.cm
75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
357 BMW-G.23 Each 112
4 Kg/sq.cm
90 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
358 BMW-G.24 Each 171
4 Kg/sq.cm
127
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
359 BMW-G.25 Each 206
4 Kg/sq.cm
75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 4
360 BMW-G.26 Each 94
Kg/sq.cm
90 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 4
361 BMW-G.27 Each 138
Kg/sq.cm
110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe -
362 BMW-G.28 Each 178
4 Kg/sq.cm
75 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 4
363 BMW-G.29 Each 57
Kg/sq.cm
90 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 4
364 BMW-G.30 Each 95
Kg/sq.cm
110 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe -
365 BMW-G.31 Each 119
4 Kg/sq.cm
366 BMW-G.32 160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 976
367 BMW-G.33 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 366
368 BMW-G.34 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 589
369 BMW-G.35 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 701
370 BMW-G.36 75 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 400
371 BMW-G.37 90 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 635
372 BMW-G.38 110 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 774
75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe -
373 BMW-G.39 Each 240
6 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe -
374 BMW-G.40 Each 373
6 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe
375 BMW-G.41 Each 444
- 6 Kg/sq.cm
75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe -
376 BMW-G.42 Each 257
6 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe -
377 BMW-G.43 Each 389
6 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe
378 BMW-G.44 Each 480
- 6 Kg/sq.cm
75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
379 BMW-G.45 Each 174
6 Kg/sq.cm
90 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
380 BMW-G.46 Each 269
6 Kg/sq.cm
110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe -
381 BMW-G.47 Each 328
6 Kg/sq.cm
75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 6
382 BMW-G.48 Each 150
Kg/sq.cm
90 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 6
383 BMW-G.49 Each 220
Kg/sq.cm
110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe -
384 BMW-G.50 Each 266
6 Kg/sq.cm
75 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 6
385 BMW-G.51 Each 97
Kg/sq.cm
90 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 6
386 BMW-G.52 Each 151
Kg/sq.cm
110 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe -
387 BMW-G.53 Each 192
6 Kg/sq.cm
128
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
388 BMW-G.54 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm Each 1596
75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe
389 BMW-G.55 Each 42
fittings
90 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe
390 BMW-G.56 Each 59
fittings
110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe
391 BMW-G.57 Each 70
fittings
75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe
392 BMW-G.58 Each 57
fittings
90 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe
393 BMW-G.59 Each 80
fittings
110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe
394 BMW-G.60 Each 91
fittings
395 BMW-G.61 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 33
396 BMW-G.62 90 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 46
397 BMW-G.63 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 59
398 BMW-G.64 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 57
399 BMW-G.65 90 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 83
400 BMW-G.66 110 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 100
401 BMW-G.67 75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 50
402 BMW-G.68 90 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 75
403 BMW-G.69 110 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 91
404 BMW-G.70 75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 62
405 BMW-G.71 90 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 91
406 BMW-G.72 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 110
407 BMW-G.73 75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 96
408 BMW-G.74 90 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 155
409 BMW-G.75 110 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 183
410 BMW-G.76 75 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 128
411 BMW-G.77 90 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 242
412 BMW-G.78 110 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 237
413 BMW-G.79 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 63
414 BMW-G.80 90 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 100
415 BMW-G.81 110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 115
416 BMW-G.82 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 80
417 BMW-G.83 90 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 126
418 BMW-G.84 110 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 145
419 BMW-G.85 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 86
420 BMW-G.86 90 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 134
421 BMW-G.87 110 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 152
422 BMW-G.88 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 112
423 BMW-G.89 90 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 174
424 BMW-G.90 110 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 196
425 BMW-G.91 75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 30
426 BMW-G.92 90 mm dia - Coupler - UPVC/SWR Pipe fittings Each 43
427 BMW-G.93 110 mm dia - Coupler - UPVC/SWR Pipe fittings Each 48
428 BMW-G.94 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 50
129
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
429 BMW-G.95 110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 48
430 BMW-G.96 90 x 110mm dia - Reducer - UPVC/SWR Pipe fittings Each 67
431 BMW-G.97 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 8
432 BMW-G.98 75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 12
433 BMW-G.99 90 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 14
434 BMW-G.100 110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 16
40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings - Pipe Clip -
435 BMW-G.101 Each 9
UPVC/SWR Pipe fittings
436 BMW-G.102 50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 12
437 BMW-G.103 63 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 12
438 BMW-G.104 75 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 13
439 BMW-G.105 90 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 14
440 BMW-G.106 110 mm - Pipe Clip - UPVC/SWR Pipe fittings Each 15
441 BMW-G.107 160 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 30
P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Pipe
442 BMW-G.108 Each 159
fittings
P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe
443 BMW-G.109 Each 176
fittings
444 BMW-G.110 P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 201
P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe
445 BMW-G.111 Each 185
fittings
446 BMW-G.112 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings Each 192
447 BMW-G.113 Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings Each 279
4" (101.6 mm ) Nahany Trap ( Without Jali with
448 BMW-G.114 Each 83
inlet)UPVC/SWR Pipe fittings
3" (76.2 mm ) Nahany Trap ( without Jali without
449 BMW-G.115 Each 74
inlet)UPVC/SWR Pipe fittings
4" (101.6 mm ) Nahany Trap ( without inlet with out
450 BMW-G.116 Each 83
Jali)UPVC/SWR Pipe fittings
451 BMW-G.117 Mini Trap - UPVC/SWR Pipe fittings Each 45
3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe
452 BMW-G.118 Each 86
fittings
4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe
453 BMW-G.119 Each 122
fittings
4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe
454 BMW-G.120 Each 95
fittings
455 BMW-G.121 Round Jali - UPVC/SWR Pipe fittings Each 20
456 BMW-G.122 Square tile & Jalli - UPVC/SWR Pipe fittings Each 33
457 BMW-G.123 Pipe connector( with LIP ring) - UPVC/SWR Pipe fittings Each 122
458 BMW-G.124 Pipe connector( with out LIP ring) - UPVC/SWR Pipe fittings Each 99
459 BMW-G.125 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings Each 117
460 BMW-G.126 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings Each 124
461 BMW-G.127 75 mm dia - Door cap - UPVC/SWR Pipe fittings Each 31
462 BMW-G.128 90 mm dia - Door cap - UPVC/SWR Pipe fittings Each 54
463 BMW-G.129 110 mm dia - Door cap - UPVC/SWR Pipe fittings Each 45
464 BMW-G.130 75 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 30
465 BMW-G.131 90 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 52
466 BMW-G.132 110 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 54
130
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
467 BMW-G.133 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings Each 7
468 BMW-G.134 90 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings Each 8
110 mm dia - Rubber ring for Socket - UPVC/SWR Pipe
469 BMW-G.135 Each 9
fittings
470 BMW-G.136 75 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 8
471 BMW-G.137 90 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 9
472 BMW-G.138 110 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 12
473 BMW-G.139 LIP ring 110 mm - UPVC/SWR Pipe fittings Each 58
474 BMW-G.140 Rubber Lubricant - 100 Grams Each 22
475 BMW-G.141 Rubber Lubricant- 250Grams Each 43
476 BMW-G.142 Rubber Lubricant - 500 Grams Each 78
477 BMW-G.143 Rubber Lubricant - 1000 Grams Each 185
478 BMW-G.144 P' Trap with lip UPVC/SWR Pipe fittings Each 252
479 BMW-G.145 50 ml - Solvent Cement Each 13
480 BMW-G.146 100 ml - Solvent Cement Each 21
481 BMW-G.147 250 ml - Solvent Cement Each 50
482 BMW-G.148 500 ml - Solvent Cement Each 98
483 BMW-G.149 1000 ml - Solvent Cement Each 192
484 BMW-G.150 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe fittings Each 76
160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe
485 BMW-G.151 Each 190
fittings
Labour charges for laying, fixing and commissioning the PVC
pipes including couplers/ bends/ tees etc any diameter
486 BMW-G.152 including fixing necessary fittings like bends, plugs, couplers, 1 RM 70
junctions, tees, etc with solvent jointing as per standard
practice
CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS:
H
3989 - 1984
487 BMW-H.01 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1270
488 BMW-H.02 100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1691
489 BMW-H.03 150 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 3099
75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M)
490 BMW-H.04 Each 1410
Double socket
100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M)
491 BMW-H.05 Each 1902
Double socket
492 BMW-H.06 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1142
493 BMW-H.07 100 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1526
494 BMW-H.08 75 mm dia 8'-0" (2438.4 mm) CI (Spun) pipes Each 1022
495 BMW-H.09 100 mm dia 8'-0" (2438.4 mm) CI (Spun) pipes Each 1358
496 BMW-H.10 75 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 831
497 BMW-H.11 100 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 1084
498 BMW-H.12 75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 874
499 BMW-H.13 100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 1084
75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun)
500 BMW-H.14 Each 303
fittings
100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun)
501 BMW-H.15 Each 348
fittings
502 BMW-H.16 75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) Each 434
131
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
fittings
100 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun)
503 BMW-H.17 Each 499
fittings
150 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun)
504 BMW-H.18 Each 952
fittings
75 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun)
505 BMW-H.19 Each 599
fittings
100 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun)
506 BMW-H.20 Each 661
fittings
150 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun)
507 BMW-H.21 Each 1193
fittings
75 mm diaCut pipes (pieces ) 3 feet (914.4 mm) CI (Spun)
508 BMW-H.22 Each 918
fittings
100 mm diaCut pipes (pieces ) 3 feet (914.4 mm) CI (Spun)
509 BMW-H.23 Each 1239
fittings
75 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI (Spun)
510 BMW-H.24 Each 1010
fittings
100 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI (Spun)
511 BMW-H.25 Each 1511
fittings
512 BMW-H.26 75 mm dia Plain Bend - CI (Spun) fittings Each 312
513 BMW-H.27 100 mm dia Plain Bend - CI (Spun) fittings Each 367
514 BMW-H.28 150 mm dia Plain Bend - CI (Spun) fittings Each 874
515 BMW-H.29 75 mm dia Door Bend - CI (Spun) fittings Each 323
516 BMW-H.30 100 mm dia Door Bend - CI (Spun) fittings Each 418
517 BMW-H.31 150 mm dia Door Bend - CI (Spun) fittings Each 957
518 BMW-H.32 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 312
519 BMW-H.33 100 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 367
520 BMW-H.34 150 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 874
521 BMW-H.35 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 323
522 BMW-H.36 100 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 418
523 BMW-H.37 150 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 957
Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI
524 BMW-H.38 Each 635
(Spun) fittings
Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI
525 BMW-H.39 Each 741
(Spun) fittings
526 BMW-H.40 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 332
527 BMW-H.41 100 mm dia Heel Rest Bend - CI (Spun) fittings Each 424
528 BMW-H.42 150 mm dia Heel Rest Bend - CI (Spun) fittings Each 902
529 BMW-H.43 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 418
530 BMW-H.44 100 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 564
531 BMW-H.45 150 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 1164
532 BMW-H.46 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 493
533 BMW-H.47 100 mm dia Single Branch Door "T" - CI (Spun) fittings Each 654
534 BMW-H.48 150 mm dia Single Branch Door "T" - CI (Spun) fittings Each 1229
535 BMW-H.49 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 493
536 BMW-H.50 100 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 654
537 BMW-H.51 150 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 1443
538 BMW-H.52 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 540
132
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
539 BMW-H.53 100 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 722
540 BMW-H.54 150 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 1554
541 BMW-H.55 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 571
542 BMW-H.56 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 769
543 BMW-H.57 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 637
544 BMW-H.58 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 802
545 BMW-H.59 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 637
546 BMW-H.60 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 802
547 BMW-H.61 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 671
548 BMW-H.62 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 870
549 BMW-H.63 75 mm dia Shoe Bend - CI (Spun) fittings Each 394
550 BMW-H.64 100 mm dia Shoe Bend - CI (Spun) fittings Each 461
551 BMW-H.65 150 mm dia Shoe Bend - CI (Spun) fittings Each 935
552 BMW-H.66 75 mm dia Collar - CI (Spun) fittings Each 269
553 BMW-H.67 100 mm dia Collar - CI (Spun) fittings Each 327
554 BMW-H.68 150 mm dia Collar - CI (Spun) fittings Each 671
555 BMW-H.69 75 mm dia Cowl - CI (Spun) fittings Each 238
556 BMW-H.70 100 mm dia Cowl - CI (Spun) fittings Each 269
557 BMW-H.71 150 mm dia Cowl - CI (Spun) fittings Each 604
558 BMW-H.72 75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 345
559 BMW-H.73 100 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 418
560 BMW-H.74 150 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 844
561 BMW-H.75 75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 377
100 mm dia Offset 6" (152.4mm ) projection - CI (Spun)
562 BMW-H.76 Each 493
fittings
150 mm dia Offset 6" (152.4mm ) projection - CI (Spun)
563 BMW-H.77 Each 983
fittings
564 BMW-H.78 75 mm diaLong Door Bend - CI (Spun) fittings Each 792
565 BMW-H.79 100 mm diaLong Door Bend - CI (Spun) fittings Each 852
566 BMW-H.80 75 mm dia Hand Hole pipe ( Inspection pipe) Each 455
567 BMW-H.81 100 mm dia Hand Hole pipe ( Inspection pipe) Each 620
568 BMW-H.82 150 mm dia Hand Hole pipe ( Inspection pipe) Each 825
569 BMW-H.83 75 mm dia P Traps - CI (Spun) fittings Each 493
570 BMW-H.84 100 mm dia P Traps - CI (Spun) fittings Each 676
4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI
571 BMW-H.85 Each 775
(Spun) fittings
4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI
572 BMW-H.86 Each 775
(Spun) fittings
4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI (Spun)
573 BMW-H.87 Each 481
fittings
6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI
574 BMW-H.88 Each 659
(Spun) fittings
3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI (Spun)
575 BMW-H.89 Each 411
fittings
3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI (Spun)
576 BMW-H.90 Each 642
fittings
3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI (Spun)
577 BMW-H.91 Each 642
fittings
133
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI (Spun)
578 BMW-H.92 Each 642
fittings
4" x 3" (101.6 mm x 76.2mm ) Plain T75 mm dia - CI (Spun)
579 BMW-H.93 Each 642
fittings
4" x 3" (101.6 mm x 76.2mm ) Door T75 mm dia - CI (Spun)
580 BMW-H.94 Each 680
fittings
4" x 3" (101.6 mm x 76.2mm ) Plain Y75 mm dia - CI (Spun)
581 BMW-H.95 Each 680
fittings
4" x 3" (101.6 mm x 76.2mm ) DoorY75 mm dia - CI (Spun)
582 BMW-H.96 Each 726
fittings
6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI (Spun)
583 BMW-H.97 Each 950
fittings
6" x 4" (152.4 mm x101.6 mm )Door T 75 mm dia - CI (Spun)
584 BMW-H.98 Each 1029
fittings
6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI (Spun)
585 BMW-H.99 Each 1089
fittings
6" x 4" (152.4 mm x101.6 mm )DoorY 75 mm dia - CI (Spun)
586 BMW-H.100 Each 1331
fittings
75 mm diaPlain " T" 27 " (685.8 mm ) Special Types of Long
587 BMW-H.101 Each 1379
Fittings
100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of
588 BMW-H.102 Each 1937
Long CI (Spun) fittings
75 mm dia Door "T" 27" (685.8 mm )Special Types of Long CI
589 BMW-H.103 Each 1540
(Spun) fittings
100mm dia Door "T" 27" (685.8 mm )Special Types of Long
590 BMW-H.104 Each 2128
CI (Spun) fittings
75 mm diaPlain " Y" 27" (685.8 mm) Special Types of Long CI
591 BMW-H.105 Each 1540
(Spun) fittings
100mm diaPlain " Y" 27" (685.8 mm) Special Types of Long
592 BMW-H.106 Each 2128
CI (Spun) fittings
75 mm dia Door " Y" 27" (685.8 mm)Special Types of Long CI
593 BMW-H.107 Each 1717
(Spun) fittings
100mm dia Door " Y" 27" (685.8 mm)Special Types of Long
594 BMW-H.108 Each 2337
CI (Spun) fittings
I MISCELLANEOUS ITEMS
595 BMW-I.01 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 56
596 BMW-I.02 b) - do - labour charges only Each 19
597 BMW-I.03 a) Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 11
598 BMW-I.04 b) - do - labour charges only Each 2
Chiselling the stone masonry wall for fixing of wooden blocks
599 BMW-I.05 Each 30
including finishing as directed by the department
Chiselling the stone masonry wall and repairs as directed by
600 BMW-I.06 1 Rm 143
the department.
Chiselling the brick masonry wall and repairs as directed by
601 BMW-I.07 1 Rm 30
the department.
a) S & F NP telephonic shower spray set & valve mixer with
602 BMW-I.08 rest and all fittings complete (ARK/ESSCO or equivalent Each 1896
make)
603 BMW-I.09 b) - do - labour charges only Each 401
604 BMW-I.10 a) S & F NP shower spray fancy with NP Flexible pipe Each 508
605 BMW-I.11 b) - do - labour charges only Each 133
134
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
606 BMW-I.12 a) S & F NP cover for Nahany trap Each 29
607 BMW-I.13 b) - do - labour charges only Each 19
608 BMW-I.14 a) Painting the flushing tank with white enamel paint Each 105
609 BMW-I.15 b) - do - labour charges only Each 64
S & F internal fittings for flush tank Parryplast wonder flush or
610 BMW-I.16 Each 694
equivalent
611 BMW-I.17 Repairing and over hauling flushing tank Each 80
612 BMW-I.18 a) Supplying & Fixing NP chain rubber and plug for basin Each 37
613 BMW-I.19 b) - do - labour charges only Each 7
a) S & F 25.4 mm dia& 609.6 mm long aluminium anodized
614 BMW-I.20 Each 146
towel rod with brackets and aluminium screws
615 BMW-I.21 b) - do - labour charges only Each 44
a) S & F 19.04 mm dia& 609.6 mm long aluminium anodized
616 BMW-I.22 Each 130
towel rod with brackets and aluminium screws
617 BMW-I.23 b) - do - labour charges only Each 67
a) S & F 609.6 mm long 127 mm wide plate glass shelf with
618 BMW-I.24 superior quality aluminium railing complete with aluminium Each 186
screws
619 BMW-I.25 b) - do - labour charges only Each 56
620 BMW-I.26 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 60
621 BMW-I.27 b) - do - labour charges only Each 11
622 BMW-I.28 a) S & F NP soap dish heavy type with NP SCREWS Each 208
623 BMW-I.29 b) - do - labour charges only Each 12
624 BMW-I.30 a) S &F NP holder brackets with screws Each 43
625 BMW-I.31 b) - do - labour charges only Each 14
a) S & F liquid soap container NP metallic with NP brackets
626 BMW-I.32 Each 209
and screws.
627 BMW-I.33 b) - do - labour charges only Each 22
628 BMW-I.34 a) S & F 31.75 mm C.P TRAPS Each 273
629 BMW-I.35 b) - do - labour charges only Each 44
630 BMW-I.36 a) Supplying & fixing 88.9 mm A.C cowls Each 62
631 BMW-I.37 b) - do - labour charges only Each 14
632 BMW-I.38 a)Supplying & fixing A.CCowl 63.5 mm dia Each 42
633 BMW-I.39 b) - do - labour charges only Each 11
634 BMW-I.40 Removing and refixing W.C s Each 193
Removing and refixing wash hand basins of any size with
635 BMW-I.41 Each 186
fittings complete
636 BMW-I.42 a)S & F 76.2 x 101.6 mm teak wood block complete Each 23
637 BMW-I.43 b) - do - labour charges only Each 9
638 BMW-I.44 Cutting holes in C.C; basement & repairs Labour charges only Each 107
Cutting holes in stone masonry& basement and repairs
639 BMW-I.45 Each 72
Labour charges only
640 BMW-I.46 Cutting holes in Brick masonry& repairs Labour charges only Each 47
641 BMW-I.47 Cutting holes in RCC slab floor & repairs Labour charges only Each 72
a)Supplying & Fixing 12.7 mm PVC connection with brass
642 BMW-I.48 Each 86
union nut C.P coated
643 BMW-I.49 b) - do - labour charges only Each 17
644 BMW-I.50 a) S & F 12.7 mm .M.P couplings Each 31
135
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
645 BMW-I.51 b) - do - labour charges only Each 11
646 BMW-I.52 a) S & F 19.05 mm M.P couplings Each 37
647 BMW-I.53 b) - do - labour charges only Each 11
648 BMW-I.54 a) S& F MP coupling 25.4 mm dia Each 82
b) - do - labour charges only Each 11
649 BMW-I.55 a) S & FPVC Rubber adopter for LLC and bend Each 17
650 BMW-I.56 b) - do - labour charges only Each 8
651 BMW-I.57 a) S& F 31.75 mm Brass union nuts Each 31
652 BMW-I.58 b) - do - labour charges only Each 7
653 BMW-I.59 a) S& F 38.1 mm Brass union nuts Each 33
654 BMW-I.60 b) - do - labour charges only Each 9
a) Constructing Brick masonry chamber over the gully trap or
655 BMW-I.61 peet valve and fitted with 304.8 x 228.6 m size CI frame and Each 417
hinged cover.
656 BMW-I.62 b) - do - labour charges only Each 100
a) Constructing Brick masonry support for G.I pipe with C.M
657 BMW-I.63 304.8 x 228.6 x228.6 mm size includingplastering and Each 68
finishing etc. complete.
658 BMW-I.64 b) - do - labour charges only Each 22
a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover over
659 BMW-I.65 Each 110
gully taps
660 BMW-I.66 b) - do - labour charges only Each 35
661 BMW-I.67 a) Supplying & fixing CI Nahany trap grating Each 19
662 BMW-I.68 b) - do - labour charges only Each 11
663 BMW-I.69 a) Supplying & fixing CI gully trap grating Each 44
664 BMW-I.70 b) - do - labour charges only Each 11
665 BMW-I.71 a) Supplying & fixing valves for brass ball cocks 25.4 mm dia Each 17
666 BMW-I.72 b) - do - labour charges only Each 9
667 BMW-I.73 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 16
668 BMW-I.74 b) - do - labour charges only Each 7
669 BMW-I.75 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 35
670 BMW-I.76 b) - do - labour charges only Each 11
671 BMW-I.77 Removing 12.7 mm GIpipe and refixing the same Mr. 58
672 BMW-I.78 Removing 19.05 mm GIpipe and refixing the same Mr. 63
673 BMW-I.79 Removing 25.4 mm GIpipe and refixing the same Mr. 95
674 BMW-I.80 Removing 38.1 mm GIpipe and refixing the same Rm 120
675 BMW-I.81 Removing 50.8 mm GIpipe and refixing the same Rm 141
676 BMW-I.82 Cleaning the W.C with acid and Vim powder Each 39
677 BMW-I.83 Cleaning the Urinal with acid and Vim power Each 39
678 BMW-I.84 Cleaning the wash basin with acid and Vim powder Each 39
679 BMW-I.85 Cleaning theE.W.C with acid and Vim power Each 39
Supplying & fixing 914.4 x 457.2 mm CI man hole frame and
680 BMW-I.86 Each 1732
cover (light weight) 30 Kgs
Supplying & fixing 602 x 602 mm CI man hole frame and
681 BMW-I.87 Each 2564
cover (light weight) 30 Kgs
682 BMW-I.88 b) - do - labour charges only Each 140
683 BMW-I.89 a) Supplying & fixing CI steps for septic tank. Each 57
136
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
684 BMW-I.90 b) - do - labour charges only Each 11
a) Supplying & fixing 50.8cm dia C.I. Man hole frame & cover
685 BMW-I.91 Each 1121
for 914.4 mm dia chamber (20 Kgs - Light weight)
686 BMW-I.92 b) - do - labour charges only Each 140
a) Supplying & fixing 50.8cm dia C.I. Man hole frame & cover
687 BMW-I.93 for 914.4 mm dia chamber(Medium weight) as per IS:1726 - Each 2326
40 Kgs
688 BMW-I.94 b) - do - labour charges only Each 356
Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel &
689 BMW-I.95 rabbit wire mesh in CM 1:3 with fine rendering in neat cement 1Sqm 212
labour charges Only
690 BMW-I.96 a) Cost. 50.8 mm RCC partition wall 1Sqm 238
691 BMW-I.97 b) - do - labour charges only 1 Sqm 44
692 BMW-I.98 a)S& F double layer of bamboo matting tarred on both sides. 10 Sqm 547
693 BMW-I.99 b) - do - labour charges only 10 Sqm 123
694 BMW-I.100 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 30
695 BMW-I.101 a) Supplying & fixing 76.2 mm W.I clamps Each 23
696 BMW-I.102 b) - do - labour charges only Each 9
697 BMW-I.103 a) Supplying & fixing NP coat hook Each 41
698 BMW-I.104 b) - do - labour charges only Each 11
a) Supplying and fixing TV shape mirror with plastic frame
699 BMW-I.105 Each 452
size 609.6 mm x 457 .2 mm
700 BMW-I.106 b) - do - labour charges only Each 116
701 BMW-I.107 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 9
702 BMW-I.108 b) - do - labour charges only Each 1
703 BMW-I.109 a) Supplying & fixing 19.06 mm dia GI plug Each 12
704 BMW-I.110 b) - do - labour charges only Each 1
705 BMW-I.111 a) Supplying and fixing 38.1 mm dia of GI plug Each 62
706 BMW-I.112 b) - do - labour charges only Each 9
707 BMW-I.113 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 95
708 BMW-I.114 b) - do - labour charges only Each 11
709 BMW-I.115 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 172
710 BMW-I.116 b) - do - labour charges only Each 19
711 BMW-I.117 a) Supplying & fixing C.P flange. Each 23
712 BMW-I.118 b) - do - labour charges only Each 8
a) Supplying & fixing stainless steel sink size 36" x 18"
713 BMW-I.119 Each 6471
(914.4x457.2mm) 1 mm thick with accessories
714 BMW-I.120 b) - do - labour charges only Each 506
a) Supplying & fixing SINGLE BOWL stainless steel sink size
715 BMW-I.121 24"x18"x8 "(609.6 x 457.2 x 203.2mm) 1 mm thick with Each 5100
accessories
716 BMW-I.122 b) - do - labour charges only Each 491
a) Supplying & fixing stainless steel sink size 20" x18" x 8
717 BMW-I.123 Each 4637
"(508x457.2x203.2mm) 1 mm thick with accessories
718 BMW-I.124 b) - do - labour charges only Each 449
Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed
719 BMW-I.125 porcelain channel fixed in brick masonry white cement Each 470
pointing.
137
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply & Fixing of steel surgical long elbow action handle
720 BMW-I.126 12.7 mm dia bib cock Indian make heavy type including all Each 853
materials
Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark
721 BMW-I.127 with 2 Nos. flanges, 8 nos, 3/4" dia nuts & bolts and all Each 4672
necessary washers and packing materials etc. complete
722 BMW-I.128 Supply & fixing porcelain P' trap Each 201
Supplying & fixing oval shape basin white (520x410mm)parry
723 BMW-I.129 Each 2138
or equivalent
Supply & fixing RCC cover 22" dia with nominal reinforcement
724 BMW-I.130 Each 633
3 " thick and hooks for lifting
Supply & fixing cp spl. Grating with frame and cover of 1st
725 BMW-I.131 Each 54
quality
726 BMW-I.132 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 341
727 BMW-I.133 Supply & fixing of LLC handle set 1stquality Each 68
Mechanical Cleaning of water sumps with pumps & UV
728 BMW-I.134 1000 Lit 47
disinfecting
729 BMW-I.135 Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 356
730 BMW-I.136 Supply & fixing 4" dia CP thimble pipe:220 mm long Each 532
731 BMW-I.137 Supply & fixing 4" dia CP thimble pipe: 300 mm long Each 710
732 BMW-I.138 Supply & fixing CP long bend Each 301
733 BMW-I.139 Supply & fixing CP short bend Each 151
Supplying & fixing 15 mm bib tap with flange Chromeum
734 BMW-I.140 Each 1483
plated Jaquar make queen series
Supply & fixing bib cock cum health faucet with 1 m long
735 BMW-I.141 flexible tube and wall hook ofJaquar make queen series with 7 Each 3758
years warranty Chrome plated
Supply & fixing bib cock cum health faucet with 1 m long
736 BMW-I.142 flexible tube and wall hook ofJaquar make queen series with 7 Each 6319
years warranty: Ivory gold
Supply & fixing pillar cock Jaquar make Queen series with 7
737 BMW-I.143 Each 1557
years warranty: Chrome plated
Supply & fixing pillar cock Jaquar make Queen series with 7
738 BMW-I.144 Each 2658
years warranty: Ivory gold
Supply & fixing Angular stop cocks with wall flange Jaquar
739 BMW-I.145 Each 1537
make Queen series with 7 years warranty: Chrome plated
Supply & fixing Angular stop cocks with wall flange Jaquar
740 BMW-I.146 Each 2976
make Queen series with 7 years warranty: Ivory gold
Supply & fixing Waste coupling 32 mm size full thread with 80
741 BMW-I.147 Each 345
mm heightJaquar make with 7 years warranty: Chrome plated
Supply & fixing of Bottle trap Jaquar make with 7 years
742 BMW-I.148 Each 1469
warranty: Chrome plated
Supply & fixing of Bottle trap Jaquar make with 7 years
743 BMW-I.149 Each 2484
warranty: Ivory gold
Supply & Fixing copper pipe 450 mm long with nuts &
744 BMW-I.150 Each 361
washers Jaquar make with 7 years warranty: Chrome plated
Supply & Fixing copper pipe 450 mm long with nuts &
745 BMW-I.151 Each 699
washers Jaquar make with 7 years warranty:Ivory gold
Supply and fixing wall mirror with provision for over head
746 BMW-I.152 shower and 115 mm long bend pipe with wall flange Each 4748
Jaquarmake queen series with 7 years warranty:Chrome
138
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
plated
Supply and fixing wall mirror with provision for over head
747 BMW-I.153 shower and 115 mm long bend pipe with wall flange Each 7469
Jaquarmake queen series with 7 years warranty: Ivory gold
Supply & fixing overhead shower rose with revolving joint and
748 BMW-I.154 150 mm long swivel shower arm Jaquar make queen series. Each 2203
with 7 years warranty:Chrome plated
Supply & fixing overhead shower rose with revolving joint and
749 BMW-I.155 150 mm long swivel shower arm Jaquar make queen series. Each 3228
with 7 years warranty: Ivory Gold
Supply and Fixing Wall Mixer with Telephonic shower
750 BMW-I.156 arrangement with crutch and flexible pipe Jaquar series Ivory Each 12584
gold colour for bath tub. with 7 years warranty
Supply & fixing Bath tub overflow set complete with over flow
cap, 450 mm Ball chain with rubber plug & union bend with
751 BMW-I.157 Each 1532
brass nut Jaquar make, Ivory gold colour. with 7 years
warranty
Supply & fixing sink cock with regular swinging spout with
752 BMW-I.158 wall flange chromeplated Jaquar make Queen series with 7 Each 2201
years warranty
Supply & fixingsoap dish Jaquar make queen series: with 7
753 BMW-I.159 Each 1445
years warranty:Chrome plated
Supply & fixingsoap dish Jaquar make queen series: with 7
754 BMW-I.160 Each 2120
years warranty: Ivory Gold
Supply & fixing of toilet paper holder Jaquar make Queen
755 BMW-I.161 Each 1164
series. with 7 years warranty: Chrome plated
Supply & fixing of toilet paper holder Jaquar make Queen
756 BMW-I.162 Each 2049
series. with 7 years warranty: Ivory Gold
Supply & Fixing of Towel ring Jaquar make Queen series with
757 BMW-I.163 Each 1094
7 years warranty: Chrome plated
Supply & Fixing of Towel ring Jaquar make Queen series with
758 BMW-I.164 Each 1787
7 years warranty: Ivory Gold
Supply & Fixingof towel coat hook Jaquar make Queen series
759 BMW-I.165 Each 814
with 7 years warranty:Chrome plated
Supply & Fixingof towel coat hook Jaquar make Queen series
760 BMW-I.166 Each 1684
with 7 years warranty:Ivory Gold
Supply & Fixing of Towel rod 24 " Jaquar make Queen series
761 BMW-I.167 Each 2793
Ivory gold colour with 7 years warranty
Supply & Fixing of Tumbler holder Jaquar make Queen
762 BMW-I.168 Each 1957
series, Ivory gold colour with 7 years warranty
Supply & fixing of Glass shelf 22" Jaquar make Queen series,
763 BMW-I.169 Each 3817
Ivory gold colour with 7 years warranty
Supply & Fixing of Bibcock cum Health Faucet with 1m long
764 BMW-I.170 tube and wall hook of Jaquar Continental series, Chrome Each 2769
Finish with 7 years warranty
Supply & Fixing of Bibcock Jaquar Continental series,
765 BMW-I.171 Each 814
Chrome Finish with 7 years warranty
Supply & Fixing of Pillar cock Jaquar Continental series,
766 BMW-I.172 Each 1011
Chrome Finish with 7 years warranty
Supply & Fixing of Angular stopcock with wall flange Jaquar
767 BMW-I.173 Each 752
Continental series, Chrome finish with 7 years warranty
Supply fixing of Waste coupling Jaquar make, Chrome finish
768 BMW-I.174 Each 327
with 7 years warranty
139
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish
769 BMW-I.175 Each 1469
with 7 years warranty
Supply & Fixing of copper pipe 450mm long with nuts &
770 BMW-I.176 Each 327
washers Jaquar make, Chrome Finish with 7 years warranty
Supply & Fixing of Wall Mixer with provision for overhead
771 BMW-I.177 shower and 115mm long bend pipe with wall flange Jaquar Each 3556
make Continental series, Chrome finish with 7 years warranty
Supply & Fixing of Exclusive overhead shower with 190mm
772 BMW-I.178 long light body shower arm Jaquar make Continental series, Each 1519
Chrome finish with 7 years warranty
Supply & Fixing wall mixer with telephonic shower
arrangement with crutch and telephone shower with flexible
773 BMW-I.179 Each 4965
tube Jaquar make Continental series Chrome colour for bath
tub with 7 years warranty
Supply & Fixing bath tub over flow set complete with over flow
774 BMW-I.180 cap,450mm ball chain with rubber plug 7 Union bend with Each 1159
brass nuts Jaquar make, Chrome colour with 7 years warranty
Supply & Fixing Sink cock with regular swinging spout with
775 BMW-I.181 flange chrome plated Jaquar make Continental series with 7 Each 1431
years warranty
Supply & Fixing soap dish Jaquar make Continental series,
776 BMW-I.182 Each 1127
Chrome Finish with 7 years warranty
Supply & Fixing of Toilet paper holder Jaquar make
777 BMW-I.183 Each 752
Continental series, Chrome finish with 7 years warranty
Supply & Fixing of Towel Ring Jaquar make Continental
778 BMW-I.184 Each 865
series, Chrome finish with 7 years warranty
Supply & Fixing Double coat hook Jaquar make Continental
779 BMW-I.185 Each 646
series, Chrome finish with 7 years warranty
Supply & Fixing of towel rail 24'' Jaquar make Continental
780 BMW-I.186 Each 1397
series, Chrome finish with 7 years warranty
Supply & Fixing of Tumblerholder Jaquar make Continental
781 BMW-I.187 Each 942
series, Chrome finish with 7 years warranty
Supply & Fixing of Glass shelf 22'' Jaquar make Continental
782 BMW-I.188 Each 1852
series, Chrome finish with 7 years warranty
Supply & Fixing of Bibcock cum Health Faucet with 1m long
783 BMW-I.189 tube and wall hook of Jaquar Florentine(Quarter turn) series, Each 3313
Chrome Finish with 7 years warranty
Supply & Fixing of Bibcock Jaquar Florentine (Quarter
784 BMW-I.190 Each 1117
turn)series, Chrome Finish with 7 years warranty
Supply & Fixing of Pillar cock Jaquar Florentine(Quarter turn)
785 BMW-I.191 Each 1117
series, Chrome Finish with 7 years warranty
Supply & Fixing of Angular stopcock with wall flange Jaquar
786 BMW-I.192 Florentine( Quarter turn)series, Chrome finish with 7 years Each 1099
warranty
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish
787 BMW-I.193 Each 1469
with 7 years warranty
Supply & Fixing of Wall Mixer with provision for overhead
shower and 115mm long bend pipe with wall flange Jaquar
788 BMW-I.194 Each 4291
make Florentine(Quarter turn) series, Chrome finish with 7
years warranty
Supply & Fixing wall mixer with telephonic shower
789 BMW-I.195 arrangement with crutch and telephone shower with flexible Each 6467
tube Jaquar make Florentine(Quarter turn) series Chrome
140
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
colour for bath tub with 7 years warranty
Supply & Fixing Sink cock with regular swinging spout with
790 BMW-I.196 flange chrome plated Jaquar make Florentine(Quarter turn) Each 1714
series with 7 years warranty
Supply & Fixing of Rose shower with revolving ball joint &
791 BMW-I.197 Each 1821
115mm long shower arm with 7 years warranty
Supply & Fixing of Jaquar make chrome plated Metro pole
792 BMW-I.198 flush valveconcealed type with cover plate 40mm size with 7 Each 3189
years warranty
Supply & Fixing of Jaquar make Sensotronic sensor faucet for
793 BMW-I.199 Each 12525
wash basin, Chrome plated with 7 years warranty
Supply & fixing of Jaquar make Sensotronic concealed type
794 BMW-I.200 flushing valve for urinal complete set with installation box with Each 12525
control cock, Chrome plated with 7 years warranty
Supply & fixing of Jaquar make Auto closing system pillar
795 BMW-I.201 Each 2075
cock for wash basin, Chrome plated with 7 years warranty
Supply& Fixing of Jaquar make Auto Closing system Bibcock,
796 BMW-I.202 Each 2177
Chrome plated with 7 years warranty
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
797 BMW-I.203 1 RM 133
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
works including laying pipes, fixing in position, testing and
commissioning etc :16 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
798 BMW-I.204 1 RM 165
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
works including laying pipes, fixing in position, testing and
commissioning etc :20 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
799 BMW-I.205 1 RM 207
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
works including laying pipes, fixing in position, testing and
commissioning etc: 25mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
800 BMW-I.206 1 RM 278
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
works including laying pipes, fixing in position, testing and
commissioning etc: 32 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
801 BMW-I.207 1 RM 365
capable to withstand pressure up to 80 C including all special
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
141
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
works including laying pipes, fixing in position, testing and
commissioning etc: 40 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
802 BMW-I.208 1 RM 464
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete for external
works including laying pipes, fixing in position, testing and
commissioning etc : 50 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
803 BMW-I.209 composite fittings, plastic & brass blend inserts for elbows, 1 RM 192
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc16 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
804 BMW-I.210 composite fittings, plastic & brass blend inserts for elbows, 1 RM 230
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc20 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
805 BMW-I.211 composite fittings, plastic & brass blend inserts for elbows, 1 RM 284
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc25mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
806 BMW-I.212 composite fittings, plastic & brass blend inserts for elbows, 1 RM 375
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc32 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
PE) composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
807 BMW-I.213 composite fittings, plastic & brass blend inserts for elbows, 1 RM 487
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc40 mm OD pipe
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-
808 BMW-I.214 1 RM 615
PE) composite pressure pipes conforming to IS-15450-2004
142
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
composite fittings, plastic & brass blend inserts for elbows,
tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls,
making good, laying pipes, fixing in position, testing and
commissioning etc50 mm OD pipe
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)
composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
809 BMW-I.215 composite fittings, plastic & brass blend inserts for elbows, 1 RM 157
tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in
position, testing, refilling excavated earth and commissioning
etc16 mm OD pipe
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)
composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
810 BMW-I.216 composite fittings, plastic & brass blend inserts for elbows, 1 RM 186
tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in
position, testing, refilling excavated earth and commissioning
etc20 mm OD pipe
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)
composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
811 BMW-I.217 composite fittings, plastic & brass blend inserts for elbows, 1 RM 226
tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in
position, testing, refilling excavated earth and commissioning
etc25mm OD pipe
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)
composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
812 BMW-I.218 composite fittings, plastic & brass blend inserts for elbows, 1 RM 292
tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in
position, testing, refilling excavated earth and commissioning
etc32 mm OD pipe
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)
composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all special
813 BMW-I.219 composite fittings, plastic & brass blend inserts for elbows, 1 RM 374
tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in
position, testing, refilling excavated earth and commissioning
etc40 mm OD pipe
Supply and Fixing of Premium make CPVC Pipes and Fittings
to meet the requirement of ASTM-D 2846 and are produced in
CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard
SDR 11 and SDR 13.5 pipes are made from idential CPVC
compounds having the same physical Properties for Hot and
143
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Cold Water (IS 15778:2007)
814 BMW-I.220 15.90mm ODPipe - SDR 13.5 1 RM 53
815 BMW-I.221 22.20mm ODPipe - SDR 13.5 1 RM 85
816 BMW-I.222 28.60mm ODPipe - SDR 13.5 1 RM 123
817 BMW-I.223 34.90mm ODPipe - SDR 13.5 1 RM 193
818 BMW-I.224 41.30mm ODPipe - SDR 13.5 1 RM 266
819 BMW-I.225 54mm ODPipe - SDR 13.5 1 RM 437
820 BMW-I.226 15.90mm ODPipe - SDR 11 1 RM 61
821 BMW-I.227 22.20mm ODPipe - SDR 11 1 RM 93
822 BMW-I.228 28.60mm ODPipe - SDR 11 1 RM 144
823 BMW-I.229 34.90mm ODPipe - SDR 11 1 RM 229
824 BMW-I.230 41.30mm ODPipe - SDR 11 1 RM 314
825 BMW-I.231 54mm ODPipe - SDR 11 1 RM 483
Supply of 20mm x 1.9mm PN 10/PPR Pipe conforming to DIN
826 BMW-I.232 1 RM 41
Standards 8077/8078 conforming to IS15801
Supply of 25mm x 2.3mm PN 10/PPR Pipe conforming to DIN
827 BMW-I.233 1 RM 62
Standards 8077/8078 conforming to IS15801
Supply of 32mm x 2.9mm PN 10/PPR Pipe conforming to DIN
828 BMW-I.234 1 RM 97
Standards 8077/8079 conforming to IS15801
Supply of 40mm x 3.7mm PN 10/PPR Pipe conforming to DIN
829 BMW-I.235 1 RM 152
Standards 8077/8079 conforming to IS15801
Supply of 50mm x 4.6mm PN 10/PPR Pipe conforming to DIN
830 BMW-I.236 1 RM 272
Standards 8077/8080 conforming to IS15801
Supply of 63mm x 5.8mm PN 10/PPR Pipe conforming to DIN
831 BMW-I.237 1 RM 427
Standards 8077/8081 conforming to IS15801
Supply of 75mm x 6.8mm PN 10/PPR Pipe conforming to DIN
832 BMW-I.238 1 RM 594
Standards 8077/8082 conforming to IS15801
Supply of 90mm x 8.2mm PN 10/PPR Pipe conforming to DIN
833 BMW-I.239 1 RM 815
Standards 8077/8083 conforming to IS15801
Supply of 110mm x 10mm PN 10/PPR Pipe conforming to
834 BMW-I.240 1 RM 1208
DIN Standards 8077/8084 conforming to IS15801
Supply of 20mm x 2.8mm PN 16/PPR Pipe conforming to DIN
835 BMW-I.241 1 RM 56
Standards 8077/8078 conforming to IS15801
Supply of 25mm x 3.5mm PN 16/PPR Pipe conforming to DIN
836 BMW-I.242 1 RM 86
Standards 8077/8078 conforming to IS15801
Supply of 32mm x 4.4mm PN 16/PPR Pipe conforming to DIN
837 BMW-I.243 1 RM 138
Standards 8077/8079 conforming to IS15801
Supply of 40mm x 5.5mm PN 16/PPR Pipe conforming to DIN
838 BMW-I.244 1 RM 212
Standards 8077/8079 conforming to IS15801
Supply of 50mm x 6.9mm PN 16/PPR Pipe conforming to DIN
839 BMW-I.245 1 RM 380
Standards 8077/8080 conforming to IS15801
Supply of 63mm x 8.6mm PN 16/PPR Pipe conforming to DIN
840 BMW-I.246 1 RM 599
Standards 8077/8081 conforming to IS15801
Supply of 75mm x 10.3mm PN 16/PPR Pipe conforming to
841 BMW-I.247 1 RM 846
DIN Standards 8077/8082 conforming to IS15801
Supply of 90mm x 12.3mm PN 16/PPR Pipe conforming to
842 BMW-I.248 1 RM 1206
DIN Standards 8077/8083 conforming to IS15801
Supply of 110mm x 15.1mm PN 16/PPR Pipe conforming to
843 BMW-I.249 1 RM 1807
DIN Standards 8077/8084 conforming to IS15801
844 BMW-I.250 Supply of 20mm x 3.4mm PN 20/PPR Pipe conforming to DIN 1 RM 65
144
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Standards 8077/8078 conforming to IS15801
Supply of 25mm x 4.2mm PN 20/PPR Pipe conforming to DIN
845 BMW-I.251 1 RM 100
Standards 8077/8078 conforming to IS15801
Supply of 32mm x 5.4mm PN 20/PPR Pipe conforming to DIN
846 BMW-I.252 1 RM 161
Standards 8077/8079 conforming to IS15801
Supply of 40mm x 6.7mm PN 20/PPR Pipe conforming to DIN
847 BMW-I.253 1 RM 247
Standards 8077/8079 conforming to IS15801
Supply of 50mm x 8.3mm PN 20/PPR Pipe conforming to DIN
848 BMW-I.254 1 RM 439
Standards 8077/8080 conforming to IS15801
Supply of 63mm x 10.5mm PN 20/PPR Pipe conforming to
849 BMW-I.255 1 RM 693
DIN Standards 8077/8081 conforming to IS15801
Supply of 75mm x 12.5mm PN 20/PPR Pipe conforming to
850 BMW-I.256 1 RM 984
DIN Standards 8077/8082 conforming to IS15801
Supply of 90mm x 15mm PN 20/PPR Pipe conforming to DIN
851 BMW-I.257 1 RM 1337
Standards 8077/8083
Supply of 110mm x 18.3mm PN 20/PPR Pipe conforming to
852 BMW-I.258 1 RM 2105
DIN Standards 8077/8084 conforming to IS15801
Supply of 20mm PPR Socket conforming to DIN Standards
853 BMW-I.259 1 RM 9
8077/8084
Supply of 25mm PPR Socket conforming to DIN Standards
854 BMW-I.260 1 RM 13
8077/8085
Supply of 32mm PPR Socket conforming to DIN Standards
855 BMW-I.261 1 RM 18
8077/8086
Supply of 40mm PPR Socket conforming to DIN Standards
856 BMW-I.262 1 RM 30
8077/8087
Supply of 50mm PPR Socket conforming to DIN Standards
857 BMW-I.263 1 RM 59
8077/8088
Supply of 63mm PPR Socket conforming to DIN Standards
858 BMW-I.264 1 RM 113
8077/8089
Supply of 75mm PPR Socket conforming to DIN Standards
859 BMW-I.265 1 RM 173
8077/8090
Supply of 90mm PPR Socket conforming to DIN Standards
860 BMW-I.266 1 RM 331
8077/8091
Supply of 110mm PPR Socket conforming to DIN Standards
861 BMW-I.267 1 RM 589
8077/8092
Supply of 32mm PPR Core Flange conforming to DIN
862 BMW-I.268 Each 36
Standards 8077/8086
Supply of 40mm PPR Core Flange conforming to DIN
863 BMW-I.269 Each 57
Standards 8077/8087
Supply of 50mm PPR Core Flange conforming to DIN
864 BMW-I.270 Each 74
Standards 8077/8088
Supply of 63mm PPR Core Flange conforming to DIN
865 BMW-I.271 Each 117
Standards 8077/8089
Supply of 75mm PPR Core Flange conforming to DIN
866 BMW-I.272 Each 136
Standards 8077/8090
Supply of 90mm PPR Core Flange conforming to DIN
867 BMW-I.273 Each 348
Standards 8077/8091
Supply of 110mm PPR Core Flange conforming to DIN
868 BMW-I.274 Each 450
Standards 8077/8092
Supply of 20mm PPR Elbow conforming to DIN Standards
869 BMW-I.275 Each 15
8077/8084
145
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 25mm PPR Elbow conforming to DIN Standards
870 BMW-I.276 Each 19
8077/8085
Supply of 32mm PPR Elbow conforming to DIN Standards
871 BMW-I.277 Each 36
8077/8086
Supply of 40mm PPR Elbow conforming to DIN Standards
872 BMW-I.278 Each 63
8077/8087
Supply of 50mm PPR Elbow conforming to DIN Standards
873 BMW-I.279 Each 119
8077/8088
Supply of 63mm PPR Elbow conforming to DIN Standards
874 BMW-I.280 Each 232
8077/8089
Supply of 75mm PPR Elbow conforming to DIN Standards
875 BMW-I.281 Each 375
8077/8090
Supply of 90mm PPR Elbow conforming to DIN Standards
876 BMW-I.282 Each 698
8077/8091
Supply of 110mm PPR Elbow conforming to DIN Standards
877 BMW-I.283 Each 1295
8077/8092
Supply of 20mm PPR Tee conforming to DIN Standards
878 BMW-I.284 Each 14
8077/8084
Supply of 25mm PPR Tee conforming to DIN Standards
879 BMW-I.285 Each 24
8077/8085
Supply of 32mm PPR Tee conforming to DIN Standards
880 BMW-I.286 Each 43
8077/8086
Supply of 40mm PPR Tee conforming to DIN Standards
881 BMW-I.287 Each 76
8077/8087
Supply of 50mm PPR Tee conforming to DIN Standards
882 BMW-I.288 Each 135
8077/8088
Supply of 63mm PPR Tee conforming to DIN Standards
883 BMW-I.289 Each 275
8077/8089
Supply of 75mm PPR Tee conforming to DIN Standards
884 BMW-I.290 Each 538
8077/8090
Supply of 90mm PPR Tee conforming to DIN Standards
885 BMW-I.291 Each 781
8077/8091
Supply of 110mm PPR Tee conforming to DIN Standards
886 BMW-I.292 Each 1353
8077/8092
Supply of 20mm PPR End Cap conforming to DIN Standards
887 BMW-I.293 Each 6
8077/8084
Supply of 25mm PPR End Cap conforming to DIN Standards
888 BMW-I.294 Each 9
8077/8085
Supply of 32mm PPR End Cap conforming to DIN Standards
889 BMW-I.295 Each 18
8077/8086
Supply of 40mm PPR End Cap conforming to DIN Standards
890 BMW-I.296 Each 30
8077/8087
Supply of 50mm PPR End Cap conforming to DIN Standards
891 BMW-I.297 Each 53
8077/8088
Supply of 63mm PPR End Cap conforming to DIN Standards
892 BMW-I.298 Each 113
8077/8089
Supply of 75mm PPR End Cap conforming to DIN Standards
893 BMW-I.299 Each 190
8077/8090
Supply of 90mm PPR End Cap conforming to DIN Standards
894 BMW-I.300 Each 303
8077/8091
Supply of 110mm PPR End Cap conforming to DIN Standards
895 BMW-I.301 Each 599
8077/8092
146
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 25mm x 20mm PPR Reducer conforming to DIN
896 BMW-I.302 Each 11
Standards 8077/8092
Supply of 32mm x 25mm PPR Reducer conforming to DIN
897 BMW-I.303 Each 19
Standards 8077/8092
Supply of 32mm x 20mm PPR Reducer conforming to DIN
898 BMW-I.304 Each 18
Standards 8077/8092
Supply of 40mm x 32mm PPR Reducer conforming to DIN
899 BMW-I.305 Each 31
Standards 8077/8092
Supply of 40mm x 25mm PPR Reducer conforming to DIN
900 BMW-I.306 Each 30
Standards 8077/8092
Supply of 40mm x 20mm PPR Reducer conforming to DIN
901 BMW-I.307 Each 30
Standards 8077/8092
Supply of 50mm x 20mm PPR Reducer conforming to DIN
902 BMW-I.308 Each 46
Standards 8077/8092
Supply of 50mm x 25mm PPR Reducer conforming to DIN
903 BMW-I.309 Each 47
Standards 8077/8092
Supply of 50mm x 32mm PPR Reducer conforming to DIN
904 BMW-I.310 Each 47
Standards 8077/8092
Supply of 50mm x 40mm PPR Reducer conforming to DIN
905 BMW-I.311 Each 48
Standards 8077/8092
Supply of 63mm x 20mm PPR Reducer conforming to DIN
906 BMW-I.312 Each 105
Standards 8077/8092
Supply of 63mm x 25mm PPR Reducer conforming to DIN
907 BMW-I.313 Each 105
Standards 8077/8092
Supply of 63mm x 32mm PPR Reducer conforming to DIN
908 BMW-I.314 Each 106
Standards 8077/8092
Supply of 63mm x 40mm PPR Reducer conforming to DIN
909 BMW-I.315 Each 107
Standards 8077/8092
Supply of 63mm x 50mm PPR Reducer conforming to DIN
910 BMW-I.316 Each 108
Standards 8077/8092
Supply of 75mm x 40mm PPR Reducer conforming to DIN
911 BMW-I.317 Each 156
Standards 8077/8092
Supply of 75mm x 50mm PPR Reducer conforming to DIN
912 BMW-I.318 Each 157
Standards 8077/8092
Supply of 75mm x 63mm PPR Reducer conforming to DIN
913 BMW-I.319 Each 199
Standards 8077/8092
Supply of 90mm x 63mm PPR Reducer conforming to DIN
914 BMW-I.320 Each 380
Standards 8077/8092
Supply of 90mm x 75mm PPR Reducer conforming to DIN
915 BMW-I.321 Each 403
Standards 8077/8092
Supply of 110mm x 63mm PPR Reducer conforming to DIN
916 BMW-I.322 Each 508
Standards 8077/8092
Supply of 110mm x 75mm PPR Reducer conforming to DIN
917 BMW-I.323 Each 591
Standards 8077/8092
Supply of 110mm x 90mm PPR Reducer conforming to DIN
918 BMW-I.324 Each 637
Standards 8077/8092
Supply of 25mm x 20mm x 25mm PPR Reducer Tee
919 BMW-I.325 Each 30
conforming to DIN Standards 8077/8092
Supply of 32mm x 25mm x 32mm PPR Reducer Tee
920 BMW-I.326 Each 52
conforming to DIN Standards 8077/8092
Supply of 32mm x 20mm x 32mm PPR Reducer Tee
921 BMW-I.327 Each 52
conforming to DIN Standards 8077/8092
147
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 40mm x 20mm x 40mm PPR Reducer Tee
922 BMW-I.328 Each 86
conforming to DIN Standards 8077/8092
Supply of 40mm x 25mm x 40mm PPR Reducer Tee
923 BMW-I.329 Each 87
conforming to DIN Standards 8077/8092
Supply of 40mm x 32mm x 40mm PPR Reducer Tee
924 BMW-I.330 Each 89
conforming to DIN Standards 8077/8092
Supply of 50mm x 20mm x 50mm PPR Reducer Tee
925 BMW-I.331 Each 124
conforming to DIN Standards 8077/8092
Supply of 50mm x 25mm x 50mm PPR Reducer Tee
926 BMW-I.332 Each 125
conforming to DIN Standards 8077/8092
Supply of 50mm x 32mm x 50mm PPR Reducer Tee
927 BMW-I.333 Each 129
conforming to DIN Standards 8077/8092
Supply of 50mm x 40mm x 50mm PPR Reducer Tee
928 BMW-I.334 Each 130
conforming to DIN Standards 8077/8092
Supply of 63mm x 20mm x 63mm PPR Reducer Tee
929 BMW-I.335 Each 358
conforming to DIN Standards 8077/8092
Supply of 63mm x 25mm x 63mm PPR Reducer Tee
930 BMW-I.336 Each 360
conforming to DIN Standards 8077/8092
Supply of 63mm x 32mm x 63mm PPR Reducer Tee
931 BMW-I.337 Each 365
conforming to DIN Standards 8077/8092
Supply of 63mm x 40mm x 63mm PPR Reducer Tee
932 BMW-I.338 Each 371
conforming to DIN Standards 8077/8092
Supply of 63mm x 50mm x 63mm PPR Reducer Tee
933 BMW-I.339 Each 377
conforming to DIN Standards 8077/8092
Supply of 75mm x 50mm x 75mm PPR Reducer Tee
934 BMW-I.340 Each 506
conforming to DIN Standards 8077/8092
Supply of 75mm x 63mm x 75mm PPR Reducer Tee
935 BMW-I.341 Each 514
conforming to DIN Standards 8077/8092
Supply of 90mm x 50mm x 90mm PPR Reducer Tee
936 BMW-I.342 Each 681
conforming to DIN Standards 8077/8092
Supply of 90mm x 63mm x 90mm PPR Reducer Tee
937 BMW-I.343 Each 724
conforming to DIN Standards 8077/8092
Supply of 110mm x 75mm x 110mm PPR Reducer Tee
938 BMW-I.344 Each 1235
conforming to DIN Standards 8077/8092
Supply of 110mm x 90mm x 110mm PPR Reducer Tee
939 BMW-I.345 Each 1284
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Adaptor
940 BMW-I.346 Each 95
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Adaptor
941 BMW-I.347 Each 97
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Adaptor
942 BMW-I.348 Each 170
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Adaptor
943 BMW-I.349 Each 174
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Female Threaded Adaptor
944 BMW-I.350 Each 179
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Female Threaded Adaptor
945 BMW-I.351 Each 277
conforming to DIN Standards 8077/8092
Supply of 40mm x 1¼” PPR Female Threaded Adaptor
946 BMW-I.352 Each 410
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Female Threaded Adaptor
947 BMW-I.353 Each 572
conforming to DIN Standards 8077/8092
148
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 63mm x 2" PPR Female Threaded Adaptor
948 BMW-I.354 Each 761
conforming to DIN Standards 8077/8092
Supply of 75mm x 2½”PPR Female Threaded Adaptor
949 BMW-I.355 Each 1467
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Adaptor
950 BMW-I.356 Each 147
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Adaptor
951 BMW-I.357 Each 152
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Male Threaded Adaptor
952 BMW-I.358 Each 222
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Male Threaded Adaptor
953 BMW-I.359 Each 232
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Male Threaded Adaptor conforming
954 BMW-I.360 Each 431
to DIN Standards 8077/8092
Supply of 40mm x 1¼” PPR Male Threaded Adaptor
955 BMW-I.361 Each 505
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Male Threaded Adaptor
956 BMW-I.362 Each 706
conforming to DIN Standards 8077/8092
Supply of 63mm x 2" PPR Male Threaded Adaptor conforming
957 BMW-I.363 Each 1086
to DIN Standards 8077/8092
Supply of 75mm x 2½”PPR Male Threaded Adaptor
958 BMW-I.364 Each 1737
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Elbow
959 BMW-I.365 Each 102
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Elbow
960 BMW-I.366 Each 106
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Elbow
961 BMW-I.367 Each 163
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Elbow
962 BMW-I.368 Each 157
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Female Threaded Elbow
963 BMW-I.369 Each 183
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Female Threaded Elbow
964 BMW-I.370 Each 306
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Elbow conforming
965 BMW-I.371 Each 152
to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Elbow conforming
966 BMW-I.372 Each 167
to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Male Threaded Elbow conforming
967 BMW-I.373 Each 221
to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Male Threaded Elbow conforming
968 BMW-I.374 Each 212
to DIN Standards 8077/8092
Supply of 32mm x1" PPR Male Threaded Elbow conforming
969 BMW-I.375 Each 458
to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Tee conforming
970 BMW-I.376 Each 98
to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Tee conforming
971 BMW-I.377 Each 108
to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Tee conforming
972 BMW-I.378 Each 179
to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Tee conforming
973 BMW-I.379 Each 189
to DIN Standards 8077/8092
149
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 32mm x ¾” PPR Female Threaded Tee conforming
974 BMW-I.380 Each 212
to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Female Threaded Tee conforming
975 BMW-I.381 Each 298
to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Teeconforming to
976 BMW-I.382 Each 153
DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Tee conforming to
977 BMW-I.383 Each 163
DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Male Threaded Tee conforming to
978 BMW-I.384 Each 234
DIN Standards 8077/8092
Supply of 32mm x ½” PPR Male Threaded Tee conforming to
979 BMW-I.385 Each 240
DIN Standards 8077/8092
Supply of 32mm x¾”PPR Male Threaded Tee conforming to
980 BMW-I.386 Each 253
DIN Standards 8077/8092
Supply of 32mm x 1" PPR Male Threaded Tee conforming to
981 BMW-I.387 Each 467
DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Union
982 BMW-I.388 Each 394
conforming to DIN Standards 8077/8092
Supply of 25mm x¾”PPR Female Threaded Union conforming
983 BMW-I.389 Each 591
to DIN Standards 8077/8092
Supply of 32mm x1”PPR Female Threaded Union conforming
984 BMW-I.390 Each 789
to DIN Standards 8077/8092
Supply of 40mm x1¼”PPR Female Threaded Union
985 BMW-I.391 Each 1106
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Female Threaded Union
986 BMW-I.392 Each 1777
conforming to DIN Standards 8077/8092
Supply of 63mm x 2” PPR Female Threaded Union
987 BMW-I.393 Each 2822
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Union conforming
988 BMW-I.394 Each 452
to DIN Standards 8077/8092
Supply of 25mm x¾”PPR Male Threaded Union conforming to
989 BMW-I.395 Each 601
DIN Standards 8077/8092
Supply of 32mm x1”PPR Male Threaded Union conforming to
990 BMW-I.396 Each 789
DIN Standards 8077/8092
Supply of 40mm x1¼”PPR Male Threaded Union conforming
991 BMW-I.397 Each 986
to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Male Threaded Union conforming
992 BMW-I.398 Each 1875
to DIN Standards 8077/8092
Supply of 63mm x 2” PPR Male Threaded Union conforming
993 BMW-I.399 Each 3159
to DIN Standards 8077/8092
Supply of 20mm PPR Union conforming to DIN Standards
994 BMW-I.400 Each 86
8077/8092
Supply of 25mm PPR Union conforming to DIN Standards
995 BMW-I.401 Each 101
8077/8092
Supply of 32mm PPR Union conforming to DIN Standards
996 BMW-I.402 Each 166
8077/8092
Supply of 20mm PPR Ball Valve conforming to DIN Standards
997 BMW-I.403 Each 157
8077/8092
Supply of 25mm PPR Ball Valve conforming to DIN Standards
998 BMW-I.404 Each 207
8077/8092
Supply of 32mm PPR Ball Valve conforming to DIN Standards
999 BMW-I.405 Each 218
8077/8092
150
Building SoR: 2017-18 (Civil & Electrical)
Basic RATE
Sl. No Item Code Description of item Unit for
SoR 2017-18
Supply of 40mm PPR Ball Valve conforming to DIN Standards
1000 BMW-I.406 Each 445
8077/8092
Supply of 50mm PPR Ball Valve conforming to DIN Standards
1001 BMW-I.407 Each 519
8077/8092
Supply of 63mm PPR Ball Valve conforming to DIN Standards
1002 BMW-I.408 Each 840
8077/8092
Supply of 75mm PPR Ball Valve conforming to DIN Standards
1003 BMW-I.409 Each 1382
8077/8092
Supply of 90mm PPR Ball Valve conforming to DIN Standards
1004 BMW-I.410 Each 1975
8077/8092
Supply of 20mm PPR Clamp conforming to DIN Standards
1005 BMW-I.411 Each 9
8077/8092
Supply of 25mm PPR Clamp conforming to DIN Standards
1006 BMW-I.412 Each 12
8077/8092
Supply of 32mm PPR Clamp conforming to DIN Standards
1007 BMW-I.413 Each 14
8077/8092
Supply of 40mm PPR Clamp conforming to DIN Standards
1008 BMW-I.414 Each 15
8077/8092
Labour charges for laying, joining, welding, fixing and
commissioning the PPR pipes including all specials such as
1009 BMW-I.415 couplers/ bends/ tees etc including fixing necessary fittings 1 RM 31
like bends, plugs, couplers, junctions, tees, etc with welding
the joint as per standard practice - up to 40 mm dia
NOTE
All the items to be used on work are of first quality & ISI and as approved by the Engineer In
1
charge of the work.
Rates given above are:
2 a) Ratefor finished item of work
b) Labour charges only
RATES
a) Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
3
b) Works Contract VAT for General/ Composition Scheme on finished items may be allowed as
applicable.
4 LABOUR Labour charges are increased based on proposals and market rates
Coloured porcelain items: 50% extra may be allowed on basic cost of white porcelain items
5
excluding fittings
SSR Rates for Sanitary & water supply items are purely for guidance for the officers for
6 preparation of estimates vide Para 113 of APPWD code. Authority who prepares the estimate is
however responsible for proper rates as envisaged in Para 45 of APPWD code.
LEGEND
"BMW" -X.XX "BMW" for Water Supply & Sanitary items
XXX-"A".XX "A" for Name of the Section
XXX-X."01" "01" for Serial Number of the Item
151
Building SoR: 2017-18 (Civil & Electrical)
Note: 1) All Building Materials conforming to ISI Standards shall be used in all CIVIL, Water Supply &
Sanitary Fitings and Electrical Works.
2) Not only limiting to the Brand / Manufacturer / Supplier for Materials/Products mentioned above,
Material / Product conforming to the Specification and Standards of ISI from any Brand /
Manufacturer, shall also be allowed in all CIVIL, Water Supply & Sanitary Fitings and Electrical Works
also.
152
Building SoR: 2017-18 (Civil & Electrical)
Electrical Items -
Buildings-SoR-2017-18
153
Building SoR: 2017-18 (Civil & Electrical)
SECTION - 1
1.1 M.S.CONDUIT PIPES 157 158
1.2 PVC CONDUIT PIPES 159 161
1.3 HOT DIP GALVANISED METAL BOXES 161 161
1.4 T.W. BOARDS 161 162
1.5 COPPER FLEXIBLE CABLES 162 165
SERVICE MAINS AND FLAT CABLES OF ISI FOR SUBMERSIBLE 165 166
1.6
MOTORS.
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES 166 169
1.8 MODULAR SWITCHES AND ACCESSORIES 169 172
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE UNITS 173 173
2.2 ON LOAD CHANGE OVER SWITCHES. (OPEN EXECUTION) 174 174
2.3 CHANGE OVER SWITCHES IN SS ENCLOUSURE 174 175
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS ENCLOSURE 175 176
2.5 HRC FUSE LINKS (BOLTED TYPE) 176 176
2.6 PORCELAIN REWIRABLE FUSE UNITS. 176 176
2.7 VOLTAGE SURGE PROTECTORS 177 177
2.8 PANEL MOUNTING MCCBs/ ACBs 177 178
2.9 MCBs 178 180
2.10 ISOLATORS 180 182
2.11 RCCBs 182 183
2.12 MCB DISTRIBUTION BOARDS 183 190
SECTION - 3
3.1 SV/ MH/ HALOZEN STREET LIGHT LUMINAIRES 190 191
3.2 POST TOP LANTERN LUMINAIRES 191 191
ACCESSORIES FOR MV / SV / MH LUMINAIRES I.E., 191 192
3.3 COPPER BALLASTS, ENEGRY SAVING ELECTRONIC
BALLAST FOR STREET LIGHT, CAPACITORS, IGNITORS
3.4 LAMPS 192 193
3.5 NATURE SW ITCHES 193 195
3.6 INTERNAL LUMINAIRES 195 195
3.7 FLOURSCENT / CFL LAMPS/LED BULBS 196 197
3.8 ENERGY CONSERVING FIXTURES 197 197
3.9 LED LUMINAIRES 197 209
SECTION - 4
4.1 U.G. CABLES,11 KV H. T. XLPE CABLES 209 213
4.2 CABLE GLANDS 213 213
4.3 LUGS 214 215
154
Building SoR: 2017-18 (Civil & Electrical)
155
Building SoR: 2017-18 (Civil & Electrical)
1 The area allowances in case of Corporation, Municipalities, Jail Compounds, Agency & Tribal areas
and Industrial areas have to be followed as per prevailing Common SOR.
2 The Electrical contractor is solely responsible for both quality and quantity. Proposing specific
make in the estimate from the SOR is within the scope of concerned field officers based on the
necessity and availability of materials in such areas.
3 In case of 2way points i.e. stair case point etc where two way switch control is necessary,
an extra at 50 % excess over each point shall be allowed.
4 W here ever the light/fan point is provided at a height/length of 15 feet and above, then
an extra of 50% over the point rates shall be allowed.
5 The rates for common civil items including labour rates have to be adopted from prevailing
SOR.
6 The rates for all types of electrical items proposed in SOR are exclusive of GST (Basic Rates).
7 The Government instructions for usage of Energy efficient luminaries have to be invariably
followed while proposing luminaries in the estimates.
8 The rates for items such as Lifts, Refrigerators / A.C. plants / W ater coolers and Video
and Audio Systems etc., have to be invariably followed based on the prevailing market rates, since
the rates and specification varies from manufacturer to manufacturer considerably. Hence , rates
for these items are not incorporated in the schedule. However, relevant data without rates is
provided in the standard schedule data for electrical works. .
9 In case of any addition to the proposed SOR, the approval has to be obtained from the
Chief Engineer R&B Electrical . Temporary approvals for materials which are under relevant
specifications of the BIS / ISO / ISI can be given by the Superintending Engineer (R&B) Electrical,
duly obtaining approval from the Chief Engineer (R&B) Electrical.
10 The Superintending Engineer (R&B) Electrical will review the performance over the
quality of the makes proposed in the SOR from time to time and in case any inferior quality is
observed the same shall be brought to the notice of the Chief Engineer (R&B) Electrical to consider
for deletion from the SOR.
11 The schedule of rates is only for guidance of officers for preparation of estimates as
per the Para 113 of APPW D code. The authority that sanctioned the estimate is however
responsible for adopting the proper rates in the estimates as envisaged in para 45 of APPW D code.
12 As per GO Ms No.51 Industries and commence (MSME) Dept Dt:01.06.2010, all the
indenting departments / Agents should invariably give preference to all local MSME which are
manufacturing quality products having ISO 9001 – 2000, DGS & D, BIS certification without
entertaining any other dealers / branded product manufacturers who have no production base in
Andhra Pradesh.
156
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
SECTION - 1
1.1 M.S. CONDUIT PIPES
Supply of ISI, 20mm outer dia, 16 guage thickness MS
1 ELEC-1.1.1 conduit pipe of 1 RM 81
Makes: NAI / Bharath / GB / AKG.
Supply of ISI, 25mm outer dia, 16 guage thickness MS
2 ELEC-1.1.2 conduit pipe of 1 RM 94
Makes: NAI / Bharath / GB / AKG.
Supply of ISI, 32mm outer dia, 16 guage thickness MS
3 ELEC-1.1.3 conduit pipe. 1 RM 144
Makes: NAI / Bharath / GB / AKG.
Supply of ISI, 38mm outer dia, 16 guage thickness MS
4 ELEC-1.1.4 conduit pipe 1 RM 238
Makes: NAI / Bharath / GB / AKG.
Supply of ISI, 50mm outer dia,16 guage thickness MS
5 ELEC-1.1.5 conduit pipe 1 RM 328
Makes: NAI / Bharath / GB / AKG.
Supply of 19 / 20 mm MS Junction box normal range big
6 ELEC-1.1.6 size long neck. 1 No 27
157
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
24 ELEC-1.1.24 Supply of 19/20mm MS Inspection Elbow. 1 No 22
25 ELEC-1.1.25 Supply of 25mm MS Inspection Elbow. 1 No 31
158
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
PVC CONDUIT PIPES
1.2
Supply of ISI 20mm outer dia medium (1.55mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
52 ELEC-1.2.1 1 RM 18
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 20mm outer dia heavy (2.10mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
53 ELEC-1.2.2 1 RM 22
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 25mm outer dia medium (1.80mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
54 ELEC-1.2.3 1 RM 27
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 25mm outer dia heavy (2.20mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
55 ELEC-1.2.4 1 RM 31
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline. /Polycab
Supply of ISI 32mm outer dia medium (2.10mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
56 ELEC-1.2.5 1 RM 36
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 40mm outer dia medium (2.30mm
thickness) grade with IS:9537 part 3 FRLS regid PVC pipe
57 ELEC-1.2.6 1 RM 49
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 50mm outer dia medium (2.85mm thickness)
grade with IS:9537 part 3 FRLS regid PVC pipe
58 ELEC-1.2.7 1 RM 72
Makes : VIP / Besto plast / GoldMedal / Million plast / GM /
Sudhakar / Polyline/Polycab
Supply of ISI 19/20mm width and 12.5mm height Casing
59 ELEC-1.2.8 and Caping. 1 RM 22
Makes: Any ISI make.
Supply of ISI 25mm width and 12.5mm height Casing and
60 ELEC-1.2.9 Caping. 1 RM 27
Makes: Any ISI make.
Supply of ISI 32mm width and 12.5mm height Casing and
61 ELEC-1.2.10 Caping. 1 RM 36
Makes: Any ISI make.
Supply of ISI 38/40mm width and 12.5mm height Casing
62 ELEC-1.2.11 and Caping. 1 RM 58
Makes: Any ISI make.
Supply of 19/20mm PVC Flexible Pipe.
63 ELEC-1.2.12 Make: GoldMedal / Million plast / GM / Sudhakar / Besto 1 RM 4
plast / Polyline
Supply of 25mm PVC Flexible Pipe.
64 ELEC-1.2.13 Make: GoldMedal / Million plast / GM / Sudhakar / Besto 1 RM 5
plast / Polyline
Supply of 32mm PVC Flexible Pipe.
65 ELEC-1.2.14 Make: GoldMedal / Million plast / GM / Sudhakar / Besto 1 RM 6
plast / Polyline
Supply of 40/38mm PVC Flexible Pipe.
66 ELEC-1.2.15 Make: GoldMedal / Million plast / GM / Sudhakar / Besto 1 RM 13
plast / Polyline
159
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 50mm PVC Flexible Pipe.
67 ELEC-1.2.16 Make: GoldMedal / Million plast / GM / Sudhakar / Besto 1 RM 18
plast / Polyline
160
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 32mm dia 2.0mm thick PVC Bends.
85 ELEC-1.2.34 Make : GoldMedal / Millionplast / GM / Sudhakar / Besto 1 No 14
plast / Polyline / VIP/Polycab.
Supply of 40mm dia 2.0mm thick PVC Bends.
86 ELEC-1.2.35 Make : GoldMedal / Millionplast / GM / Sudhakar / Besto 1 No 17
plast / Polyline / VIP/Polycab.
Supply of 50mm dia 2.0mm thick PVC Bends.
87 ELEC-1.2.36 Make : GoldMedal / Millionplast / GM / Sudhakar / Besto 1 No 25
plast / Polyline / VIP/Polycab.
161
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of Decolam Board of Size 6" x 6"
110 ELEC-1.4.10 1 No 31
162
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 126/0.4mm (16.0 Sqmm) PVC FRLS / HFFR /
132 ELEC-1.5.7 ZHFR insulated flexible Copper cable. 100 RM 12941
Makes: Finolex / RR kabel / Havells
Supply of 14/0.3mm (1.0 Sqmm) FRLS / HFFR / ZHFR
PVC insulated 1100V grade as per IS : 694 / 1990
specification for Copper cable.
133 ELEC-1.5.8 100 RM 837
Makes: KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR
PVC insulated 1100V grade as per IS : 694 / 1990
specification for Copper cable.
134 ELEC-1.5.9 100 RM 1231
Makes: KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 36/0.3mm (2.5 Sqmm) FRLS / HFFR / ZHFR
PVC insulated 1100V grade as per IS : 694 / 1990
specification for Copper cable.
135 ELEC-1.5.10 100 RM 1989
Makes: KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 56/0.3mm (4.0 Sqmm) FRLS / HFFR / ZHFR
PVC insulated 1100V grade as per IS : 694 / 1990
specification for Copper cable.
136 ELEC-1.5.11 100 RM 3045
Makes: KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 84/0.3mm (6.0 Sqmm) FRLS / HFFR / ZHFR
PVC insulated 1100V grade as per IS : 694 / 1990
specification for Copper cable.
137 ELEC-1.5.12 100 RM 4758
Makes: KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 140/0.3mm (10.0 Sqmm) FRLS / HFFR / ZHFR
PVC insulated flexible Copper cable.
138 ELEC-1.5.13 Makes: KEI / Polycab / Bonton / V-Guard / GM / Million / 100 RM 7232
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 126/0.4mm (16.0 Sqmm) PVC FRLS / HFFR /
ZHFR insulated flexible Copper cable.
139 ELEC-1.5.14 Makes: KEI / Polycab / Bonton / V-Guard / GM / Million / 100 RM 11990
HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster
/ Kundan cab/Sudhakar
Supply of 14/0.3mm (1.0 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
140 ELEC-1.5.15 for Copper cable. 100 RM 722
Makes:Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
Supply of 22/0.3mm (1.5 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
141 ELEC-1.5.16 for Copper cable. 100 RM 1042
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
Supply of 36/0.3mm (2.5 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
142 ELEC-1.5.17 for Copper cable. 100 RM 1682
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
163
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 56/0.3mm (4.0 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
143 ELEC-1.5.18 for Copper cable. 100 RM 2522
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
Supply of 84/0.3mm (6.0 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
144 ELEC-1.5.19 for Copper cable. 100 RM 3901
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
Supply of 140/0.3mm (10.0 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
145 ELEC-1.5.20 for Copper cable. 100 RM 6185
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
Supply of 126/0.4mm (16.0 Sqmm) FRLS / ZHFR PVC
insulated 1100V grade as per IS : 694 / 1990 specification
146 ELEC-1.5.21 for Copper cable. 100 RM 9516
Makes: :Standard / Nandicab / Star / Orbit/ Benlo /
Gemscab / Gemini
SHEATHED FLEXIBLE CABLES
Supply of PVC insulated 2 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
147 ELEC-1.5.22 100 RM 3797
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 2 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
148 ELEC-1.5.23 100 RM 6056
694/1990.
Makes:Finolex / RR Kable / Havells
Supply of PVC insulated 2 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
149 ELEC-1.5.24 100 RM 9311
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 3 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
150 ELEC-1.5.25 100 RM 5198
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 3 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
151 ELEC-1.5.26 100 RM 8362
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 3 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
152 ELEC-1.5.27 100 RM 12746
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 4 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
153 ELEC-1.5.28 100 RM 6699
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 4 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
154 ELEC-1.5.29 100 RM 10667
694/1990.
Makes: Finolex / RR Kable / Havells
Supply of PVC insulated 4 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
155 ELEC-1.5.30 100 RM 16235
694/1990.
Makes: Finolex / RR Kable / Havells
164
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of PVC insulated 2 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
156 ELEC-1.5.31 694/1990. 100 RM 3038
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 2 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
157 ELEC-1.5.32 694/1990. 100 RM 4845
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 2 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
158 ELEC-1.5.33 694/1990. 100 RM 7448
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 3 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
159 ELEC-1.5.34 694/1990. 100 RM 4159
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 3 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
160 ELEC-1.5.35 694/1990. 100 RM 6690
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 3 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
161 ELEC-1.5.36 694/1990. 100 RM 10197
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 4 core 1.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
162 ELEC-1.5.37 694/1990. 100 RM 5360
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 4 core 2.5 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
163 ELEC-1.5.38 694/1990. 100 RM 8534
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
Supply of PVC insulated 4 core 4.0 Sqmm sheathed
flexible copper cable for voltage up to 1100V as per IS
164 ELEC-1.5.39 694/1990. 100 RM 12988
Makes : KEI / Polycab / V-Guard / Finecab / Million / Gold
Medal / Bonton / Nandicab / Kundan cab/Sudhakar
SERVICE MAINS AND FLAT CABLE OF ISI FOR
1.6 SUBMERSIBLE MOTORS.
165
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 10 Sqmm WPSC (Weather Proof Single Core)
ISI Alluminium Wire.
167 ELEC-1.6.3 100 RM 1460
Makes: Gold Medal / Million / GM / Vimal / Finecab /
Nakoda / Nanadicab / Payal / Kundan cab/Sudhakar
Supply of 16 Sqmm WPSC (Weather Proof Single Core)
ISI Alluminium Wire.
168 ELEC-1.6.4 100 RM 2441
Makes: Gold Medal / Million / GM / Vimal / Finecab /
Nakoda / Nanadicab / Payal / Kundan cab/Sudhakar
Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI
Alluminium Wire.
169 ELEC-1.6.5 100 RM 2734
Makes: Gold Medal / Million / GM / Vimal / Finecab /
Nakoda / Nanadicab / Payal / Kundan cab/Sudhakar
Supply of 10 Sqmm WPTC (Weather Proof Twin Core) ISI
Alluminium Wire.
170 ELEC-1.6.6 100 RM 3289
Makes: Gold Medal / Million / GM / Vimal / Finecab /
Nakoda / Nanadicab / Payal / Kundan cab/Sudhakar
Supply of 16 Sqmm WPTC (Weather Proof Twin Core) ISI
Alluminium Wire.
171 ELEC-1.6.7 100 RM 6166
Makes: Gold Medal / Million / GM / Vimal / Finecab /
Nakoda / Payal / Kundan cab/Sudhakar
Supply of 23 / 0060 twin core twisted / flat heavy Copper
wire.
172 ELEC-1.6.8 100 RM 943
Makes: Finolex / Polycab / Havells / V-Guard / Gold Medal
/ GM / Million / Vimal / Kundan cab.
Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for
Submersible Motors.
173 ELEC-1.6.9 100 RM 5181
Makes: Finolex / Polycab / Havells / V-Guard / Gold Medal
/ GM / Million / Vimal / Nandicab / Kundan cab/Hi-Tech
Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS
694:1990 for Submersible Motors.
174 ELEC-1.6.10 Makes: Finolex / Polycab / Havells / V-Guard / Gold 100 RM 7955
Medal / GM / Million / Vimal / Nandicab / Kundan cab/Hi-
Tech
Supply of 3 Core 4.0 Sqmm Flat Copper cable as per IS
694:1990 for Submersible Motors.
175 ELEC-1.6.11 Makes: Finolex / Polycab / Havells / V-Guard / Gold 100 RM 11933
Medal / GM / Million / Vimal / Nandicab / Kundan cab/Hi-
Tech
Supply of 3 Core 6.0 Sqmm Flat Copper cable as per IS
694:1990 for Submersible Motors.
176 ELEC-1.6.12 100 RM 17585
Makes: Finolex / Polycab / Havells / V-Guard / Gold Medal
/ GM / Million / Vimal / Nandicab / Kundan cab/Hi-Tech
Supply of 3 Core 10.0 Sqmm Flat Copper cable as per IS
694:1990 for Submersible Motors.
177 ELEC-1.6.13 Makes: Finolex / Polycab / Havells / V-Guard / Gold 100 RM 28576
Medal / GM / Million / Vimal / Nandicab / Kundan cab/Hi-
Tech
1.7
FLUSH TYPE SWITCHES AND ACCESSORIES
Supply of 6A 1 Way flush type Swich.
178 ELEC-1.7.1 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 16
Anchor Penta Cherry / Great white Omega
Supply of 6A 2 Way flush type Swich.
179 ELEC-1.7.2 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 19
Anchor Penta Cherry / Great white Omega 1111
166
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 6A 2 pin flush type Socket.
180 ELEC-1.7.3 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 18
Anchor Penta Cherry / Great white Omega
Supply of 6A 3/2 pin flush type Socket with shutter.
181 ELEC-1.7.4 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 24
Anchor Penta Cherry / Great white Omega
Supply of 6A flush type Neon Indicator.
182 ELEC-1.7.5 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 18
Anchor Penta Cherry / Great white Omega
Supply of 6A Triangle Plug Top of
183 ELEC-1.7.6 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 32
Anchor Penta Cherry / Great white Omega
Supply of 6A 1 Way flush type Bed Swich / Bell Push.
184 ELEC-1.7.7 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 19
Anchor Penta Cherry / Great white Omega
Supply of 16A flush type Swich.
185 ELEC-1.7.8 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 59
Anchor Penta Cherry / Great white Omega
Supply of 16A flush type Socket with shutter.
186 ELEC-1.7.9 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 59
Anchor Penta Cherry / Great white Omega
Supply of 16A flush type Switch Socket combined (2 in
one).
187 ELEC-1.7.10 1 No 92
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Anchor Penta Cherry / Great white Omega
Supply of 16A Triangle Plug Top
188 ELEC-1.7.11 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 45
Anchor Penta Cherry / Great white Omega
Supply of stepped type Electronic Regulator.
189 ELEC-1.7.12 Makes: GM G Home / Gold Medal Olive / Million Zoom / 1 No 179
Anchor Penta Cherry / Great white Omega
Supply of 3 Plate Jumbo Ceiling Rose.
190 ELEC-1.7.13 Makes: Anchor / Gold Medal Olive / Million Zoom 1 No 19
Supply of BH / SBH.
191 ELEC-1.7.14 Makes: Anchor / Gold Medal Olive / Million Zoom. 1 No 18
167
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 32A DP Flush type.
196 ELEC-1.7.19 Makes: GM / Million / Gold Medal / Maru Mantero / Anchor 1 No 96
Penta Cherry / Great white.
Supply of Calling Bell.
197 ELEC-1.7.20 Makes: GM / Million / Gold Medal / Maru / Anchor / Great 1 No 63
white.
Supply of Buzzer.
198 ELEC-1.7.21 Makes: GM / Million / Gold Medal / Maru / Anchor / Great 1 No 54
white.
Supply of Ding Dong Bell.
199 ELEC-1.7.22 Makes: GM / Million / Gold Medal / Maru / Anchor / Great 1 No 136
white.
Supply of Electronic Musical Bell.
200 ELEC-1.7.23 Makes: GM / Million / Gold Medal / Maru / Anchor / Great 1 No 218
white.
Supply of Remote Bell.
201 ELEC-1.7.24 Makes: GM / Million / Gold Medal / Vimal. 1 No 634
Supply of MC Holder.
202 ELEC-1.7.25 Makes: GM / Million / Gold Medal / Maru / Anchor / Great 1 No 19
white.
Supply of Spike Guard with 1 No Switch and 4 Nos
203 ELEC-1.7.26 Sockets. 1 No 363
Makes: GM / Million / Gold Medal /Anchor / Great white
Supply of Spike Guard with 4 No Switches and 4 Nos
204 ELEC-1.7.27 Sockets. 1 No 498
Makes: GM / Million / Gold Medal / Anchor / Great white.
Supply of 6A 1 Way flush type Switch.
205 ELEC-1.7.28 Makes: Vimal opel / Starex Smile / CPL/Koncept 1 No 14
168
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 16A flush type Swich.
212 ELEC-1.7.35 Makes: Vimal opel / Starex Smile / CPL/Koncept 1 No 50
169
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 16A / 20A 2 Way 1 Module Modular Switch.
227 ELEC-1.8.9 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 125
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 20A 1 Way 1 Module Modular Switch with
Indicator.
228 ELEC-1.8.10 1 No 125
Makes:Legrand Arteor / Schneider Zen celo/ Crabtree
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 20A Modular Socket with shutter.
229 ELEC-1.8.11 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 170
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 16A/6A 1 way Combi Socket Modular Socket
with shutter.
230 ELEC-1.8.12 1 No 178
Makes:Legrand Arteor / Schneider Zen celo/ Crabtree
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 16A Triangle Top.
231 ELEC-1.8.13 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 143
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 1 Module Modular type Electronic step type Fan
Regulator.
232 ELEC-1.8.14 1 No 343
Makes:Legrand Arteor / Schneider Zen celo/ Crabtree
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of Modular socket type Telephone jack with
Connector.
233 ELEC-1.8.15 1 No 91
Makes:Legrand Arteor / Schneider Zen celo/ Crabtree
Murano/ GM-Zenova/Goldmedal-Air
Supply of Modular co-Axial socket type TV Antenna
outlet.
234 ELEC-1.8.16 1 No 89
Makes:Legrand Arteor / Schneider Zen celo/ Crabtree
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 6A / 10A 1 Way 1 Module Modular Switch.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono/ Goldmedal(Curve/Air) / Million / Logus / GIFA /
235 ELEC-1.8.17 1 No 57
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA)/Polycab(Levana)/AMRO
N
Supply of 6A / 10A 2 Way 1 Module Modular Switch.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono / Goldmedal(Curve/Air)/Million / Logus / GIFA /
236 ELEC-1.8.18 1 No 68
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 6A / 10A 2 Pin 1 Module Modular Socket with
shutter.
Makes: Makes: Legrand Myrius / Cabtree Thames
237 ELEC-1.8.19 Platinum / GM- Zicono /Goldmedal(Curve/Air)/ Million / 1 No 58
Logus / GIFA / CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana) /
AMRON
Supply of 6A / 10A 3/2 Pin 2 Module Modular Socket with
shutter.
Makes: Makes: Legrand Myrius / Cabtree Thames
238 ELEC-1.8.20 Platinum / GM- Zicono/Goldmedal(Curve/Air) / Million / 1 No 84
Logus / GIFA / CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
239 ELEC-1.8.21 Supply of 6A / 10A 1 Module Modular Switch with Neon 1 No 68
170
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Indicator. Makes: Legrand Myrius / Cabtree Thames
Platinum / GM- Zicono / Goldmedal(Curve/Air)/Million /
Logus / GIFA / CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 6A / 10A 1 Module Modular Bell Push with
Neon Indicator.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
240 ELEC-1.8.22 1 No 82
Zicono / Million / Logus / GIFA / CPL/ Panasonic Vision /
Salzer S 90 series /Koncept(SAMRAT/QURA)
/Polycab(Levana)/ AMRON
Supply of 16A / 10A 1 Module Modular Flush Fuse with
Neon Indicator.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
241 ELEC-1.8.23 Zicono / Goldmedal(Curve/Air)/Million / Logus / GIFA / 1 No 75
CPL/ Panasonic Vision / Salzer S 90
/SeriesKoncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 16A / 20A 1 Way 1 Module Modular Switch.
Makes: Legrand Myrius / Cabtree Thames Platinum /GM-
Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA /
242 ELEC-1.8.24 1 No 75
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 16A / 20A 2 Way 1 Module Modular Switch.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono/Goldmedal(Curve/Air) / Million / Logus / GIFA /
243 ELEC-1.8.25 1 No 86
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 20A 1 Way 1 Module Modular Switch with
Indicator.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
244 ELEC-1.8.26 Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA / 1 No 82
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 20A 2 Module Modular Socket with shutter.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono /Goldmedal(Curve/Air)/G Nine / Million / Logus /
245 ELEC-1.8.27 1 No 121
GIFA / CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 16A/6A 1 way 2 Module Combi Socket Modular
Socket with shutter.
Makes: Legrand Myrius / Cabtree Thames Platinum /GM-
246 ELEC-1.8.28 Zicono/Goldmedal(Curve/Air) / Million / Logus / GIFA / 1 No 122
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 16A Triangle Top.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA /
247 ELEC-1.8.29 1 No 59
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
171
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 1 Module Modular type Electronic step type Fan
Regulator.
Makes: Legrand Myrius / Cabtree Thames Platinum /GM-
248 ELEC-1.8.30 Zicono/Goldmedal(Curve/Air) / Million / Logus / GIFA / 1 No 289
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of Modular socket type Telephone jack with
Connector.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
249 ELEC-1.8.31 Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA / 1 No 59
CPL/ Panasonic Vision / Salzer S 90
SeriesKoncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of Modular co-Axial socket type TV Antenna
outlet.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
250 ELEC-1.8.32 Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA / 1 No 58
CPL/ Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 1 or 2 Modular Cover Frame.
251 ELEC-1.8.33 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 59
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 3 Modular Cover Frame.
252 ELEC-1.8.34 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 70
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 4 Modular Cover Frame.
253 ELEC-1.8.35 Makes: Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 81
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 6 Modular Cover Frame .
254 ELEC-1.8.36 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 118
Murano/ GM-Zenova/Goldmedal(i-Push)
Supply of 8 Modular Horizontal / Vertical Cover Frame.
255 ELEC-1.8.37 Makes: Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 156
Murano / GM-Zenova/Goldmedal(i-Push)
Supply of 12 Modular Vertical Cover Frame.
256 ELEC-1.8.38 Makes:Legrand Arteor / Schneider Zen celo/ Crabtree 1 No 190
Murano / GM-Zenova/Goldmedal(i-Push)
Supply of 1 or 2 Modular Cover Frame .Makes: Legrand
Myrius / Cabtree Thames Platinum / GM- Zicono / Million /
257 ELEC-1.8.39 Logus / GIFA / CPL Panasonic Vision / Salzer S 90 1 No 51
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 3 Modular Cover Frame.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
Zicono /Goldmedal(Curve/Air)/ Million / Logus / GIFA /
258 ELEC-1.8.40 1 No 63
CPL/Panasonic Vision / Salzer S 90
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
Supply of 4 Modular Cover Frame.
Makes: Legrand Myrius / Cabtree Thames Platinum / GM-
259 ELEC-1.8.41 1 No 73
Zicono/Goldmedal(Curve/Air)/ Million / Logus / GIFA /
CPL/ Panasonic Vision / Salzer S 90
172
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/
AMRON
173
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 32A TPN Switch Disconnector Fuse Unit
271 ELEC-2.1.8 Cubical type without fuses. 1 No 1089
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 63A TPN Switch Disconnector Fuse Unit
272 ELEC-2.1.9 Cubical type without fuses. 1 No 1632
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 125A TPN Switch Disconnector Fuse Unit
273 ELEC-2.1.10 Cubical type without fuses. 1 No 3688
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 200A TPN Switch Disconnector Fuse Unit
274 ELEC-2.1.11 Cubical type without fuses. 1 No 5578
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 250A TPN Switch Disconnector Fuse Unit
275 ELEC-2.1.12 Cubical type without fuses. 1 No 6291
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 400A TPN Switch Disconnector Fuse Unit
276 ELEC-2.1.13 Cubical type without fuses. 1 No 9608
Makes: Standard / Havells / HPL / Indo Asian / Benlo
Supply of 630A TPN Switch Disconnector Fuse Unit
277 ELEC-2.1.14 Cubical type without fuses. 1 No 15956
Makes: Standard / Havells / HPL / Indo Asian / Benlo
ON LOAD CHANGEOVER SWITCHES
2.2 (OPEN EXECUTION)
AS PER IS:13947
Supply of 63A 4 Pole Change Over Switch on Load with
278 ELEC-2.2.1 open Execution. 1 No 4279
Makes: Socomec / L & T / HPL / Havells
Supply of 125A 4 Pole Change Over Switch on Load with
279 ELEC-2.2.2 open Execution. 1 No 8098
Makes: Socomec / L & T / HPL/ Havells
Supply of 200A 4 Pole Change Over Switch on Load with
280 ELEC-2.2.3 open Execution. 1 No 10837
Makes: Socomec / L & T / HPL / Havells
Supply of 250A 4 Pole Change Over Switch on Load with
281 ELEC-2.2.4 open Execution. 1 No 15400
Makes: Socomec / L & T / HPL / Havells
Supply of 400A 4 Pole Change Over Switch on Load with
282 ELEC-2.2.5 open Execution. 1 No 23498
Makes: Socomec / L & T / HPL / Havells
Supply of 630A 4 Pole Change Over Switch on Load with
283 ELEC-2.2.6 open Execution of Makes: Socomec / L & T / HPL / 1 No 27952
Havells
Supply of 63A 4 Pole Change Over Switch on Load with
284 ELEC-2.2.7 open Execution. 1 No 3789
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
Supply of 125A 4 Pole Change Over Switch on Load with
285 ELEC-2.2.8 open Execution. 1 No 7363
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
174
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 200A 4 Pole Change Over Switch on Load with
286 ELEC-2.2.9 open Execution. 1 No 9743
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
Supply of 250A 4 Pole Change Over Switch on Load with
287 ELEC-2.2.10 open Execution. 1 No 13856
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
Supply of 400A 4 Pole Change Over Switch on Load with
288 ELEC-2.2.11 open Execution. 1 No 21543
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
Supply of 630A 4 Pole Change Over Switch on Load with
289 ELEC-2.2.12 open Execution. 1 No 25869
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
Supply of 32A 4 Pole Change Over Switch on Load with
290 ELEC-2.2.13 open Execution. 1 No 1457
Makes: ABB / GE / Siemens / Indo Asian / C&S / Benlo
OFF LOAD CHANGE OVER SWITCHES IN SS
2.3 ENCLOUSURE AS PER IS:13947
175
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 100A 415V TPN Rewirable Fuse Switch in SS
300 ELEC-2.4.4 enclosure. 1 No 6361
Makes: HPL / Havells / Standard / Indo Asian
Supply of 100A 415V TPN Double Break Switch in SS
301 ELEC-2.4.5 enclosure without fuses. 1 No 6405
Makes: HPL / Havells / Standard / Indo Asian
Supply of 200A 415V TPN Double Break Switch in SS
302 ELEC-2.4.6 enclosure without fuses. 1 No 9341
Makes: HPL / Havells / Standard / Indo Asian
Supply of 32A 240V SPN Rewirable Fuse Switch in SS
enclosure.
303 ELEC-2.4.7 1 No 627
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star / Kundan cab.
Supply of 32A 415V TPN Rewirable Fuse Switch in SS
enclosure.
304 ELEC-2.4.8 1 No 998
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star / Kundan cab.
Supply of 63A 415V TPN Rewirable Fuse Switch in SS
enclosure.
305 ELEC-2.4.9 1 No 2271
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star /Kundan cab.
Supply of 100A 415V TPN Rewirable Fuse Switch in SS
enclosure.
306 ELEC-2.4.10 1 No 4419
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star / Kundan cab.
Supply of 100A 415V TPN Double Break Switch in SS
enclosure without fuse.
307 ELEC-2.4.11 1 No 4563
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star/ Kundan cab.
Supply of 200A 415V TPN Double Break Switch in SS
enclosure without fuse.
308 ELEC-2.4.12 1 No 7477
Makes: GM / Million / Sputnik / Sigma / Gold Medal /
Benlo / Star / Kundan cab.
HRC FUSE LINKS (BOLTED TYPE)
2.5
176
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 630A HRC Fuse Links.
314 ELEC-2.5.6 Makes: L & T / G E / C & S / Standard / HPL / Havells / 1 No 1343
Siemens / Indo Asian
PORCELAIN REWIRABLE FUSE UNITS.
2.6
Supply of 32A 240V Porcelain Rewirable Fuse Units.
315 ELEC-2.6.1 Makes: GM / Sputnik / Million / Gold Medal / Vimal / Star 1 No 88
/ Benlo / Kundan cab
Supply of 32A 415V Porcelain Rewirable Fuse Units.
316 ELEC-2.6.2 Makes: GM / Sputnik / Million / Gold Medal / Vimal / Star 1 No 109
/ Benlo / Kundan cab.
Supply of 63A 415V Porcelain Rewirable Fuse Units.
317 ELEC-2.6.3 Makes: GM / Sputnik / Million / Gold Medal / Vimal / Star 1 No 228
/ Benlo /Kundan cab.
Supply of 100A 415V Porcelain Rewirable Fuse Units.
318 ELEC-2.6.4 Makes: Standard / HPL/ Havells / Sputnik / Benlo 1 No 424
177
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 63A / 60A 4 Pole MCCB, Adjustable, Confirms
to IS/IEC 60947-2 having Breaking Capacity 25 KA with
328 ELEC-2.8.5 1 No 6729
thermal magnetic release Panel Mounted.
Makes: L&T / Schneider / Siemens / Hager
Supply of 125A 4 Pole MCCB, Adjustable, Confirms to
IS/IEC 60947-2 having Breaking Capacity 25 KA with
329 ELEC-2.8.6 1 No 8593
thermal magnetic release Panel Mounted.
Makes: L&T / Schneider / Siemens / Hager
Supply of 250A 4 Pole MCCB, Adjustable, Confirms to
IS/IEC 60947-2 having Breaking Capacity 35/36 KA with
330 ELEC-2.8.7 1 No 20563
thermal magnetic release Panel Mounted.
Makes: L&T / Schneider / Siemens / Hager
Supply of 400A 4 Pole MCCB, Adjustable, Confirms to
IS/IEC 60947-2 having Breaking Capacity 50 KA with
331 ELEC-2.8.8 1 No 25883
thermal magnetic release Panel Mounted.
Makes: L&T / Schneider / Siemens / Hager
Supply of 63A / 60A 3 Pole MCCB / Confirms to IS/IEC
60947-2 having Breaking Capacity 25 KA with thermal
332 ELEC-2.8.9 magnetic release Panel Mounted. 1 No 3885
Makes: GE /Legrand / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 125A 3 Pole MCCB / Confirms to IS/IEC 60947-
2 having Breaking Capacity 25 KA with thermal magnetic
333 ELEC-2.8.10 release Panel Mounted. 1 No 4419
Makes: GE / Legrand / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 250A 3 Pole MCCB / Confirms to IS/IEC 60947-
2 having Breaking Capacity 36/35 KA with thermal
334 ELEC-2.8.11 magnetic release Panel Mounted. 1 No 13619
Makes: GE / Legrand / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 63A / 60A 4 Pole MCCB / Confirms to IS/IEC
60947-2 having Breaking Capacity 25 KA with thermal
335 ELEC-2.8.12 magnetic release Panel Mounted. 1 No 5206
Makes: GE / Legrand / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 125A 4 Pole MCCB / Confirms to IS/IEC 60947-
2 having Breaking Capacity 25 KA with thermal magnetic
336 ELEC-2.8.13 release Panel Mounted. 1 No 5810
Makes: GE / Legrand / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 250A 4 Pole MCCB / Confirms to IS/IEC 60947-
2 having Breaking Capacity 36 KA with thermal magnetic
337 ELEC-2.8.14 release Panel Mounted. 1 No 16538
Makes: Legrand / GE / ABB / Havells / HPL / Standard /
Indo Asian / C&S.
Supply of 400A 4 Pole MCCB / Confirms to IS/IEC 60947-
2 having Breaking Capacity 50 KA with thermal magnetic
338 ELEC-2.8.15 1 No 21031
release Panel Mounted. Makes: Legrand / GE / ABB /
Havells / HPL / Standard / Indo Asian / C&S.
PANEL MOUNTING ACBs (Microprocessor Based)
Supply of 630/800A 3 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
339 ELEC-2.8.16 and BS-EN 60947 with Micro processer based having 1 No 133000
over load, shot circuit and earth fault
Protection. Makes: Siemens / L&T / Schneider.
178
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 630/800A 4 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
340 ELEC-2.8.17 and BS-EN 60947 with Micro processer based having 1 No 161875
over load, shot circuit and earth fault
Protection. Makes: Siemens /L&T / Schneider.
Supply of 1000A 3 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
341 ELEC-2.8.18 and BS-EN 60947 with Micro processer based having 1 No 138250
over load, shot circuit and earth fault
protection. Makes: Siemens / L&T / Schneider
Supply of 1000A 4 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
342 ELEC-2.8.19 and BS-EN 60947 with Micro processer based having 1 No 168000
over load, shot circuit and earth fault
protectio. Makes: Siemens / L&T / Schneider
Supply of 1250A 4 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
343 ELEC-2.8.20 and BS-EN 60947 with Micro processer based having 1 No 183750
over load, shot circuit and earth fault
protectio. Makes: Siemens / L&T / Schneider
Supply of 630/800A 3 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
and BS-EN 60947 with Micro processer based having
344 ELEC-2.8.21 1 No 114494
over load, shot circuit and earth fault Protection.
Makes: ABB / Legrand / HPL / GE / Indo Asian / C&S /
Havells
Supply of 630/800A 4 Pole, 50kA Air Circuit Breaker
electrically drawout Confirms to IS 13947-2, IEC 60947-2
and BS-EN 60947 with Micro processer based having
345 ELEC-2.8.22 1 No 141750
over load, shot circuit and earth fault Protection.
Makes: ABB / Legrand / HPL / GE / Indo Asian / C&S /
Havells
AIR INSULATED BUS DUCT
Supply, instalation, testing and commisioning of ........Amp,
........KA breaking capacity (100% Neutral busbar)
air insulated compact Raising mains/Bus Duct system
made of CRCA sheet/Hot Galvanized steel encloser of
thickness not less than 0.8 mm having degree of
346 ELEC-2.8.23
protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic
insulated reinforced with glass fibre four strip ALUMINIUM
busbar in convinent sections including necessary end
cover units suitable for 415 volts 3 phase, 4 wire, 50 Hz
A.C. System,etc., Makes: Legrand (Zucchini) / C&S
a) 400Amp, 50 - 53KA RM 9616
b) 630Amp, 50 - 63KA RM 11533
c) 800 Amp, 50 - 76KA RM 12513
Supply and Fixing of Spring Bracket with fixing kit for Air
347 ELEC-2.8.24 Insulated Busduct / Raising Mains. Makes: Legrand 1 No 5775
(Zucchini) / C&S
Supply and Fixing of ……. Amps Horizontal / Vertical
348 ELEC-2.8.25 bends for Air Insulated Bus Duct .Makes: Legrand
(Zucchini) / C&S
a) 400 Amps 24500
1 No
179
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
b) 630 Amps 1 No 25638
c) 800 Amps 1 No 26206
Supply and Fixing of …...Amps Tap off box for Air
349 ELEC-2.8.26 Insulated Busduct.
Makes: Legrand (Zucchini) / C&S
a) 125A 1 No 23538
b) 250A 1 No 36400
c) 400A 1 No 38981
SANDWITCH BUSDUCT
Supply, instalation, testing and commisioning of .......Amp,
............KA breaking capacity (100% Neutral busbar)
sandwitch Busduct system made of CRCA sheet/Hot
Galvanized steel encloser of thickness not less than
1.5mm having degree of protection of IP 55/IP 65 as per
350 ELEC-2.8.27
IEC/EN 61439-6, PVC/Plastic insulated reinforced with
glass fibre four strip ALUMINIUM busbar in convinent
sections including end cover units suitable for 415 volts 3
phase, 4 wire, 50 Hz A.C. System,etc., Makes: Legrand
(Zucchini) / L&T / Schneider
a) 630Amp, 40/50KA RM 12513
b) 800Amp, 50KA RM 13300
c) 1000Amp, 50KA RM 15050
Supply and Fixing of …….Amps Horizontal / Vertical
351 ELEC-2.8.28 bends for sandwitch Bus Duct .Makes: Legrand (Zucchini)
/ L&T / Schiender / C&S
a) 630A 1 No 12854
b) 800A 1 No 13606
c) 1000A 1 No 14350
Supply and Fixing of …….. Amps Copper Flexibles for
three phases and neutral for Air Insulated / sandwitch
352 ELEC-2.8.29
Busduct . Makes: Legrand (Zucchini) / L&T / Schiender
/C&S
a) 400A
1 No 24500
b) 630A 1 No 26031
c) 800A 1 No 28263
d) 1000A 1 No 29750
Supply and fixing of END Feed Unit for
400A/630A/800A/1000 Amps for Air Insulated / Sandwitch
353 ELEC-2.8.30 1 No 22313
Busdusts . Makes: Legrand (Zucchini) / L&T / Schiender
/C&S
Supply and Fixing of Adopter box for 400A / 630A/
354 ELEC-2.8.31 800A/1000A Raising Mains.Makes: Legrand (Zucchini) / 1 No 13125
L&T / Schiender /C&S
180
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Fixing of …...Amps Tap off box for Sandwitch
355 ELEC-2.8.32 Busduct.
Makes: Legrand (Zucchini) / L&T / Schiender /C&S
a) 125A 1 No 16074
b) 250A 1 No 36225
c) 400A 1 No 42000
d) 630A 1 No 48650
181
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.
368 ELEC-2.9.13 Makes: Siemens / ABB / Standard / Havells / HPL (Tecno) 1 No 716
/ Hager / Indo Asian (Gold Plus) / C&S / GM /Gold Medal
Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.
369 ELEC-2.9.14 Makes: Siemens / ABB / Standard / Havells / HPL (Tecno) 1 No 992
/ Hager / Indo Asian (Gold Plus) / C&S / GM /Gold Medal
Supply of 6-32A 10KA FP MCB, C/D Curve ISI Mark.
370 ELEC-2.9.15 Makes: Siemens / ABB / Standard / Havells / HPL (Tecno) 1 No 929
/ Hager / Indo Asian (Gold Plus) / C&S / GM /Gold Medal
Supply of 40 - 63A 10KA FP MCB, C/D Curve ISI Mark.
371 ELEC-2.9.16 Makes: Siemens / ABB / Standard / Havells / HPL (Tecno) 1 No 1246
/ Hager / Indo Asian (Gold Plus) / C&S / GM / Gold Medal
Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark.
372 ELEC-2.9.17 Makes: Milltec / Sputnik / Benlo / Vimal. 1 No 106
182
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 40A TP Isolator.
383 ELEC-2.10.4 Makes: Legrand-DX3 / Schneider-Acti9 1 No 546
183
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 40A TP Isolator.
ELEC- Makes: Milltec / Sputnik / Benlo / Vimal
399 1 No 335
2.10.20
RCCBs CONFIRMS TO
2.11 IEC:61008 AND IS:12640
184
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 40A 4 Pole RCCB 30mA. Makes: Makes:
ELEC- Siemens / ABB / Standard / Havells / HPL(Tecno) / Hager
414 1 No 2316
2.11.13 / Indo Asian(Gold Plus) / C&S / GM
Supply of 40A 4 Pole RCCB 30mA.
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL(Tecno)
415 1 No 2642
2.11.14 / Hager / Indo Asian(Gold Plus) / C&S / GM
Supply of 40A 4 Pole RCCB 100mA,
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL(Tecno)
416 1 No 2238
2.11.15 / Hager / Indo Asian(Gold Plus) / C&S / GM
Supply of 63A 4 Pole RCCB 100mA,
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL(Tecno)
417 1 No 2579
2.11.16 / Hager / Indo Asian(Gold Plus) / C&S / GM
Supply of MCB type Change Over Switch 20A Double
Pole 2 way 400V AC suitable to fix on Din Channel of
ELEC- Makes: Legrand-DX3 / Schneider-Acti9.
418 1 No 1645
2.11.17
185
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 12 Way SPN DB with IP 20 Protection as per
IS:13032 and suitable for 12 Nos S.P out goings and for 1
427 ELEC-2.12.9 No Incommer etc complete. 1 No 662
Makes: Makes: Siemens / ABB / Standard / Havells / HPL
/ Hager / Indo Asian / C&S / GM /Gold Medal
Supply of 4 Way SPN DB with IP 43 Protection as per
IS:13032 and suitable for 4Nos S.P out goings and for 1
ELEC-
428 No Incommer etc complete. 1 No 761
2.12.10
Makes: Makes: Siemens / ABB / Standard / Havells / HPL
/ Hager / Indo Asian / C&S / GM /Gold Medal
Supply of 8 Way SPN DB with IP 43 Protection as per
IS:13032 and suitable for 8 Nos S.P out goings and for 1
ELEC-
429 No Incommer etc complete. 1 No 1074
2.12.11
Makes: Makes: Siemens / ABB / Standard / Havells / HPL
/ Hager / Indo Asian / C&S / GM /Gold Medal
Supply of 12 Way SPN DB with IP 43 Protection as per
IS:13032 and suitable for 12 Nos S.P out goings and for 1
ELEC-
430 No Incommer etc complete. 1 No 1287
2.12.12
Makes: Makes: Siemens / ABB / Standard / Havells / HPL
/ Hager / Indo Asian / C&S / GM /Gold Medal
Supply of 4 Way SPN DB with IP 20 Protection as per
ELEC- IS:13032 and suitable for 4Nos S.P out goings and for 1
431 1 No 313
2.12.13 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 8 Way SPN DB with IP 20 Protection as per
ELEC- IS:13032 and suitable for 8 Nos S.P out goings and for 1
432 1 No 426
2.12.14 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 12 Way SPN DB with IP 20 Protection as per
ELEC- IS:13032 and suitable for 12 Nos S.P out goings and for 1
433 1 No 521
2.12.15 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 4 Way SPN DB with IP 43 Protection as per
ELEC- IS:13032 and suitable for 4Nos S.P out goings and for 1
434 1 No 526
2.12.16 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 8 Way SPN DB with IP 43 Protection as per
ELEC- IS:13032 and suitable for 8 Nos S.P out goings and for 1
435 1 No 720
2.12.17 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 12 Way SPN DB with IP 43 Protection as per
ELEC- IS:13032 and suitable for 12 Nos S.P out goings and for 1
436 1 No 906
2.12.18 No Incommer etc complete.
Makes: Milltec / Sputnik / Benlo / Vimal
Supply of 4 Way TPN DB Horizontal with IP 30 Protection
ELEC- as per IS:13032 and suitable for 12 Nos S.P. out goings
437 1 No 1790
2.12.19 and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 8 Way TPN DB Horizontal with IP 30 Protection
ELEC- as per IS:13032 and suitable for 24 Nos S.P. out goings
438 1 No 2560
2.12.20 and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 12 Way TPN DB Horizontal with IP 30
ELEC- Protection as per IS:13032 and suitable for 36 Nos S.P.
439 1 No 3988
2.12.21 out goings and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
186
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 4 Way TPN DB Horizontal with IP 43 Protection
ELEC- as per IS:13032 and suitable for 12 Nos S.P. out goings
440 1 No 2356
2.12.22 and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 8 Way TPN DB Horizontal with IP 43 Protection
ELEC- as per IS:13032 and suitable for 24 Nos S.P. out goings
441 1 No 3566
2.12.23 and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 12 Way TPN DB Horizontal with IP 43
ELEC- Protection as per IS:13032 and suitable for 36 Nos S.P.
442 1 No 5166
2.12.24 out goings and for 1 No 4 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 4 Way VTPN DB with IP 30 Protection as per
ELEC- IS:13032 and suitable for TP/SP out goings and for 1 No 4
443 1 No 4985
2.12.25 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 8 Way VTPN DB with IP 30 Protection as per
ELEC- IS:13032 and suitable for TP/SP out goings and for 1 No 4
444 1 No 6018
2.12.26 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 12 Way VTPN DB with IP 30 Protection as per
ELEC- IS:13032 and suitable for TP/SP out goings and for 1 No 4
445 1 No 8754
2.12.27 pole Incommer etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 4 Way VTPN DB suitable for accommodating 4
ELEC- pole incomer with IP 43 Protection as per IS:13032 and
446 1 No 5750
2.12.28 suitable for TP/SP out goings etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 6 Way VTPN DB suitable for accommodating 4
ELEC- pole incomer with IP 43 Protection as per IS:13032 and
447 1 No 6661
2.12.29 suitable for TP/SP out goings etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 8 Way VTPN DB suitable for accommodating 4
ELEC- pole incomer with IP 43 Protection as per IS:13032 and
448 1 No 7395
2.12.30 suitable for 8 Nos T.P. out goings etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 12 Way VTPN DB suitable for accommodating 4
ELEC- pole incomer with IP 43 Protection as per IS:13032 and
449 1 No 9588
2.12.31 suitable for 12 Nos T.P. out goings etc complete.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 7 Segment 4 Way TPN DB with IP 42 Protection
with provision for FPMCB / Isolator / RCCB / RCBO as
ELEC-
450 incomer, 3Nos DPMCB / Isolator / RCCB / RCBO as sub 1 No 6500
2.12.32
incomer and 12 Nos SPMCB's as out going.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 7 Segment 8 Way TPN DB with IP 42 Protection
with provision for FPMCB / Isolator / RCCB / RCBO as
ELEC-
451 incomer, 3Nos DPMCB / Isolator / RCCB / RCBO as sub 1 No 7422
2.12.33
incomer and 24Nos SPMCB's as out going.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 4 Way VTPN DB suitable for accomodating
ELEC- 125A / 160A 4 Pole MCCB as incomer and 4 Nos TP
452 1 No 7463
2.12.34 MCBs as outgoing and with IP 43 Protection.
Makes: Legrand(Ekinox 3) / Schneider.
Supply of 8 Way VTPN DB suitable for accomodating
ELEC- 125A / 160A 4 Pole MCCB as incomer and 8 Nos TP
453 1 No 9348
2.12.35 MCBs as outgoing and with IP 43 Protection.
Makes: Legrand(Ekinox 3) / Schneider.
187
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 20A SP Plug and Socket in SS enclosure.
ELEC- Makes: Legrand(Ekinox 3) / Schneider.
454 1 No 856
2.12.36
188
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 4 Way VTPN DB suitable for accommodating 4
pole incomer with IP 43 Protection as per IS:13032 and
ELEC-
466 suitable for TP/SP out goings etc complete. 1 No 5329
2.12.48
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S..
Supply of 6 Way VTPN DB suitable for accommodating 4
pole incomer with IP 43 Protection as per IS:13032 and
ELEC-
467 suitable for TP/SP out goings etc complete. 1 No 6150
2.12.49
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S.
Supply of 8 Way VTPN DB suitable for accommodating 4
pole incomer with IP 43 Protection as per IS:13032 and
ELEC-
468 suitable for 8 Nos T.P. out goings etc complete. 1 No 6800
2.12.50
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S.
Supply of 12 Way VTPN DB suitable for accommodating 4
pole incomer with IP 43 Protection as per IS:13032 and
ELEC-
469 suitable for 12 Nos T.P. out goings etc complete. 1 No 9125
2.12.51
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S.
Supply of 7 Segment 4 Way TPN DB with IP 42 Protection
with provision for FPMCB / Isolator / RCCB / RCBO as
ELEC- incomer, 3Nos DPMCB / Isolator / RCCB / RCBO as sub
470 1 No 5900
2.12.52 incomer and 12 Nos SPMCB's as out going.
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S.
Supply of 7 Segment 8 Way TPN DB with IP 42 Protection
with provision for FPMCB / Isolator / RCCB / RCBO as
ELEC- incomer, 3Nos DPMCB / Isolator / RCCB / RCBO as sub
471 1 No 6471
2.12.53 incomer and 24Nos SPMCB's as out going.
Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
Indo Asian / C&S.
Supply of 20A SP Plug and Socket in SS enclosure.
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
472 1 No 716
2.12.54 Indo Asian / C&S / GM /Gold Medal
Supply of 20A TP Plug and Socket in SS enclosure.
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
473 1 No 1237
2.12.55 Indo Asian / C&S / GM /Gold Medal
Supply of 32A TP Plug and Socket in SS enclosure.
ELEC- Makes: Siemens / ABB / Standard / Havells / HPL / Hager/
474 1 No 1713
2.12.56 Indo Asian / C&S / GM /Gold Medal
Supply of 4 Way TPN DB Horizontal with IP 20 Protection
ELEC- as per IS:13032 and suitable for 12Nos S.P. out goings
475 1 No 1223
2.12.57 and for 1 No 4 pole Incommer etc complete.
Makes: Milltec /Benlo / Vimal
Supply of 8 Way TPN DB Horizontal with IP 20 Protection
ELEC- as per IS:13032 and suitable for 24Nos S.P. out goings
476 1 No 1699
2.12.58 and for 1 No 4 pole Incommer etc complete.
Makes: Milltec /Benlo / Vimal
Supply of 12 Way TPN DB Horizontal with IP 20
ELEC- Protection as per IS:13032 and suitable for 36Nos S.P.
477 1 No 2116
2.12.59 out goings and for 1 No 4 pole Incommer etc complete.
Makes: Milltec /Benlo / Vimal
Supply of 4 Way TPN DB Horizontal with IP 43 Protection
ELEC- as per IS:13032 and suitable for 12Nos S.P. out goings
478 1 No 1586
2.12.60 and for 1 No 4 pole Incommer etc complete.
189
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Makes: Milltec /Benlo / Vimal
190
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 150W SV / MH Street light luminaire integral
with pressure diecast alluminium housing having pot
optics with IP66 protection with all standard accessories
491 ELEC-3.1.5 1 No 3773
etc.
Makes: Phillips / Crompton / Bajaj / Surya/ Venture /
Halonix
Supply of 150W SV / MH Street light luminaire integral
with pressure diecast alluminium housing having pot
492 ELEC-3.1.6 optics with IP66 protection with all standard accessories 1 No 3234
etc.
Makes: Style lamp / Mahita Electro / Capart / RK / Prolite
Supply of 250W SV / MH Street light luminaire integral
with pressure diecast alluminium housing having pot
optics with IP66 protection with all standard accessories
493 ELEC-3.1.7 1 No 4222
etc.
Makes: Phillips / Crompton / Bajaj / Surya / Venture /
Halonix
Supply of 250W SV / MH Street light luminaire integral
with pressure diecast alluminium housing having pot
494 ELEC-3.1.8 optics with IP66 protection with all standard accessories 1 No 3683
etc.
Makes: Style lamp / Mahita Electro / Capart / RK / Prolite
Supply of 400W MH Flood light luminaire with Non -
integral weather proof diecast alluminium housing with
495 ELEC-3.1.9 IP65 / IP66 protection with Control Gear Box without lamp. 1 No 5839
Makes: Wipro / G.E. / Phillips / Bajaj / Crompton / Surya /
Venture
Supply of 400W MH Flood light luminaire with Non -
integral weather proof diecast alluminium housing with
496 ELEC-3.1.10 1 No 5031
IP65 / IP66 protection with Control Gear Box without lamp.
Makes: Style lamp / Mahita Electro / Capart
Supply of 500W Hallozen Flood light luminaire with cast
alluminium housing and tough end glass cover with all
497 ELEC-3.1.11 1 No 476
standard accessories.
Makes: Style lamp / Mahita Electro / Capart / RK / Prolite
Supply of 1000W Hallozen Flood light luminaire with cast
alluminium housing and tough end glass cover with all
498 ELEC-3.1.12 1 No 898
standard accessories.
Makes: Stlyle lamp / Mahita Electro / Capart / RK / Prolite
3.2 POST TOP LANTERN LUMINAIRES
Supply of 1 x 18W CFL integral post top luminaire with
conical shape, opal clear acrylic diffuser with cast
499 ELEC-3.2.1 alluminium pole mounting capsule complete with all 1 No 1617
accessories and ballast.
Makes: Philips / Crompton / Bajaj / Surya / Havells / HPL.
Supply of Circular type LED Post Top Lantern, IP 65 with
system efficacy 85 lm/watt , CCT 3000-4000K ,
500 ELEC-3.2.2 Alluminium diecast housing with polycarbonate cover with
integrtated Electronic driver operating voltage 220-240V
,50 Hz ,P.F 0.9,CRI>70
a) 43Watt Philips Maodel BGP151/ 60W K-Lite Model
5040 Juno / 60W Wipro Model LP05 or Equivalent in Bajaj 1 No 17876
/ Crompton
b) 27Watt Philips Model BGP161/ 36W K- lite Model 5380
Juno 35W Wipro Model LP06 or Equivalent in Bajaj / 1 No 12181
Crompton/
191
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
ACCESSORIES FOR MV / SV / MH LUMINAIRES
COPPER BALLASTS
3.3
Supply of 70 W SV / MH copper ballast.
501 ELEC-3.3.1 Makes: Phillips / Bajaj / Crompton / Havells / Surya / 1 No 611
Venture / halonix
Supply of 70 W SV / MH copper ballast.
502 ELEC-3.3.2 Makes:Style lamp/ Mahita Electro / Capart / RK / Prolite 1 No 494
192
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
3.4 LAMPS
193
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 250W MH Lamp with ISI mark.
531 ELEC-3.4.16 Makes: Style Lamp / Mahita Electro / Capart 1 No 741
194
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of Automatic Street Light Control System with
Optical Micro Sensor, Low volatage / High voltage trip
and reset, operating voltage 150 - 280V AC per Phase, 50
HZ with suitable SMC enclousure of IP 54 protection,
539 ELEC-3.5.6 MCBs and contactor suitable to control the load of 12 KW 1 No 16169
of Three phase load with necessary clamping
arrangements.
Make: Swadeep Nature Switch / Light Mate or its
equivalent.
Supply of Automatic Street Light Control System with
Optical Micro Sensor, Low volatage / High voltage trip
and reset, operating voltage 150 - 280V AC per Phase, 50
HZ with suitable SMC enclousure of IP 54 protection,
540 ELEC-3.5.7 MCBs and contactor suitable to control the load of 25KW 1 No 23805
of Three phase load with necessary clamping
arrangements.
Make: Swadeep Nature Switch / Light Mate or its
equivalent.
Supply of Automatic Street Light Control System with
Optical Micro Sensor, Low volatage / High voltage trip
and reset, operating voltage 150 - 280V AC per Phase, 50
HZ with suitable SMC enclousure of IP 54 protection,
541 ELEC-3.5.8 MCBs and contactor suitable to control the load of 50KW 1 No 37729
of Three phase load with necessary clamping
arrangements.
Make: Swadeep Nature Switch / Light Mate or its
equivalent.
3.6 INTERNAL LUMINAIRES
Supply of 1 x 36/40W Box type tube light luminaire powder
coated CRCA sheet steel housing with Electronic Ballast
542 ELEC-3.6.1 1 No 719
Chokes and all standard accessories.
Makes: Wipro / G.E. / Phillips / Crompton / Bajaj .
Supply of 1 x 36/40W Box type tube light luminaire powder
coated CRCA sheet steel housing with Electronic Ballast
543 ELEC-3.6.2 1 No 656
Chokes and all standard accessories.
Makes: Surya / Havells / HPL / Fortune Art
Supply of 2 x 36/40W Box type tube light luminaire powder
coated CRCA sheet steel housing with Electronic Ballast
544 ELEC-3.6.3 1 No 1078
Chokes and all standard accessories.
Makes: Wipro / G.E. / Phillips / Crompton / Bajaj.
Supply of 2 x 36/40W Box type tube light luminaire powder
coated CRCA sheet steel housing with Electronic Ballast
545 ELEC-3.6.4 1 No 988
Chokes and all standard accessories.
Makes: Surya / Havells / HPL / Fortune Art
Supply of 1 x 36/40W Patty type tube light luminaire
powder coated CRCA sheet steel housing with Copper
546 ELEC-3.6.5 Chokes and all standard accessories. 1 No 225
Makes: Crompton / Bajaj / Surya / RK / Million / Gold
Medal
Supply of 9/13W VPIT Ballast for CFL with ISI mark.
547 ELEC-3.6.6 Makes: Crompton / Bajaj / Surya / RK / Style Lamp 1 No 108
195
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 20W Copper Wound Ballast Makes: Crompton /
549 ELEC-3.6.8 Bajaj / Surya / RK / Style Lamp / Million / Gold Medal 1 No 112
196
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Makes: Phillips /Crompton / Bajaj / Havells / Halonix
197
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
LED LUMINAIRES INDOOR
3.9
DOWN LIGHTERS
ELEC-3.9.1 b 9W 1 No 1063
9W
ELEC-3.9.2 b 1 No 938
198
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
3000K - 5700K, minimum CRI > 70, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3) etc.,
complete
a) LUMINAIRE MAKE : Pasolite / Cosmo / Polycab /
SIEGER/OREVA/Koncept
b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG /
EVERLIGHT/ San'an
6W
ELEC-3.9.3 a 625
ELEC-3.9.3 b 9W 714
ELEC-3.9.4 b 6W 1 No 625
9W
ELEC-3.9.4 c 1 No 759
ELEC-3.9.5 b 9W 1 No 714
199
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
ELEC-3.9.5 c 12W 1 No 893
ELEC-3.9.6 b 9W 1 No 625
12W
ELEC-3.9.6 c 1 No 759
ELEC-3.9.7 a 9 / 10 W 1 No 1518
200
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Surge protection: 2KV, THD<10% with high power LED's
having efficacy of > 120 lumins / watt, CCT: 3000K -
5700K, minimum CRI>70, etc., complete
Makes : VIN/Surya / Fortune Art / Syska / GM / GreenLites
/ Gold Medal / Halonix / HPL / Pharox / Jaquar / Stanjo
b) LED MAKE : Bridge Lux / LUMILEDS / CREE / NICHIA
/ Epistar/ Sunpo
9 / 10 W
ELEC-3.9.8 a 1 No 1429
ELEC-3.9.9 b 3W 1 No 402
ELEC-3.9.9 c 5W 1 No 580
Supply and Transportation of ........ LED COB Spot Light,
suitable for Recessed mounting made of diecast
alluminium body with powder coating, with Driver,
operating voltage range of 150 to 265 Volts AC, CCT:
3000K - 5700K, minimum CRI>70, .etc., complete
584 ELEC-3.9.10
Makes: Surya / Fortune Art /Syska/VIN / GM / GreenLites
/ Gold Medal / Halonix / HPL / Pharox / Jaquar / Kashyap
/ Stanjo/ Koncept
b) LED MAKE : Bridge Lux / LUMILEDS / CREE / NICHIA
/ / SAMSUNG/ Sunpo
ELEC-3.9.10
1W / 2W 1 No 295
a
ELEC-3.9.10
3W 1 No 357
b
ELEC-3.9.10
5W 1 No 536
c
Supply and Transportation of ........ LED COB Wall
washer, suitable for Recessed mounting made of diecast
alluminium body with powder coating, with Driver,
585 ELEC-3.9.11
operating voltage range of 150 to 265 Volts AC, CCT:
3000K , minimum CRI>70, .etc., complete
a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT)
201
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
/ GE / Crompton / Wipro /Bajaj / Havells
b) LED MAKE :Bridge Lux / LUMILEDS / CREE / NICHIA /
Epistar/ Sunpo
ELEC-3.9.11
12 / 15W 1 No 2857
a
ELEC-3.9.11 22 / 25W
1 No 4821
b
ELEC-3.9.11
30 / 35W 1 No 6250
c
Supply and Transportation of ........ LED COB Wall
washer, suitable for Recessed mounting made of diecast
alluminium body with powder coating, with Driver,
operating voltage range of 150 to 265 Volts AC, CCT:
3000K , minimum CRI>70, .etc., complete
586 ELEC-3.9.12
Makes: Makes:Surya / Fortune Art / Syska/VIN / GM /
GreenLites / Gold Medal / Halonix / HPL / Pharox /
Jaquar /Stanjo.
b) LED MAKE : Bridge Lux / LUMILEDS / CREE / NICHIA
/ Epistar/ Sunpo
ELEC-3.9.12
12 / 15W 1 No 2679
a
ELEC-3.9.12
22 / 25W 1 No 4643
b
ELEC-3.9.12
30 / 35W 1 No 6071
c
TUBE LIGHTS AND 2' x 2' LUMINARIES
Supply and Transportation of 18W/20W, 1200mm length
LED batten light with extruded alluminium housing and
polycarbonate cover, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<15%, with
inbuilt driver and frosted cover CCT: 3000K - 5700K,
587 ELEC-3.9.13 1 No 938
minimum CRI>70, .etc., complete.
Makes: Wipro / Phillips /Lighting Technologies(LT) / GE /
Crompton / Bajaj / VIN
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.
Supply and Transportation of 18W/20W, 1200mm length
LED batten light with extruded alluminium housing and
polycarbonate cover, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<15%, with
inbuilt driver and frosted cover CCT: 3000K - 5700K,
588 ELEC-3.9.14 minimum CRI>70, .etc., complete. 1 No 848
Makes: Makes: Surya / Pharox / Halonix / HPL /
Greenlights / Fortune Art / Capart / GM / Goldmedal /
Syska / Cosmo / Trinic
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT/ San'an
Supply and Transportation of 18W/20W, 1200mm length
LED batten light with extruded alluminium housing and
polycarbonate cover, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<15%, with
589 ELEC-3.9.15 inbuilt driver and frosted cover CCT: 3000K - 5700K, 1 No 714
minimum CRI>70, .etc., complete.
Makes: Procorp / Scintilla Stanjo / Pasolite /
SIEGER/Koncept.
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
202
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
OSRAM / SAMSUNG / EVERLIGHT/ San'an
Supply and Transportation of 20W, T8,1200mm length
LED retrofit tube light, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<10%, with
inbuilt driver and frosted cover CCT: 3000K - 5700K,
590 ELEC-3.9.16 minimum CRI>70, .etc., complete as per IS 10322 (Part 1 No 982
5/ Sec 1)..2012
Makes: Wipro / Phillips / GE / Crompton / Bajaj
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.
Supply and Transportation of 20W, T8,1200mm length
LED retrofit tube light, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<10%, with
inbuilt driver and frosted cover CCT: 3000K - 5700K,
minimum CRI>70, .etc., complete as per IS 10322 (Part
591 ELEC-3.9.17 5/ Sec 1)..2012 1 No 848
Makes: VIN /Surya / Pharox / Halonix / HPL / Greenlights /
Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo /
Trinic/Sieger
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT/ San'an
Supply of 1200 mm length,Box type powder coated tube
light luminaire with necessary wiring suitable for fixing 2
Nos retrofit T8 LED tubes but without tube and choke
592 ELEC-3.9.18 1 No 290
Makes: Wipro / Phillips / GE / Crompton / Bajaj
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.
Supply of 1200 mm length,Box type powder coated tube
light luminaire with necessary wiring suitable for fixing 1
No retrofit T8 LED tube but without tube and choke
make:Makes:VIN/ Surya / Pharox / Halonix / HPL /
593 ELEC-3.9.19 1 No 223
Greenlights / Fortune Art / Capart / GM / Goldmedal /
Syska / Cosmo / Trinic/Sieger/Koncept
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT/ San'an
Supply, transportation and fixing of 36W Recessed /
Surface mounting 2' x 2' LED luminaire made of CRCA
sheet housing with powder coated with acrylic diffuser,
Constant current Driver as per IS: 15885 (Part 2/ Sec 13) :
2012 , With System lumen output ≥ 3200lm operating
voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge
protection: 2KV, THD<10%, with high power LED's
594 ELEC-3.9.20 1 No 3750
having efficacy of > 120 lumins / watt, CCT: 3000K -
5700K, minimum CRI>70, .etc.,, complete.
a) LUMINAIRE MAKE : Phillips /Lighting
Technologies(LT) / GE / Crompton / Wipro / Bajaj /
Havells / VIN
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.
Supply, transportation and fixing of 36W Recessed /
Surface mounting 2' x 2' LED luminaire made of CRCA
sheet housing with powder coated with acrylic diffuser,
Constant current out put of Driver as per IS: 15885 (Part
595 ELEC-3.9.21 2/ Sec 13) : 2012 operating voltage range of 150 to 265 1 No 3571
Volts AC, Power factor > 0.9 high power LEDs having
efficacy of > 120 lumins/watt, junction temparature less
than 85 degrees centigrade and THD is less than 10%
etc., complete
203
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Makes: Surya / Pharox / Halonix / HPL / Greenlights /
Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo /
Trinic/Sieger
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT.
LED STREET LIGHTS
Supply and transportation of ......... LED Street light
Luminaire made of pressure diecast alluminium body with
powder coated, having protective toughned glass, Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having System efficacy > 95 lm/W and junction
temprature < 70°C, with Ingrees protection IP65,
Luminaire performance complies to IS 10322 (Part 5 /
Sec-3), Driver surge protection 4KV, external Surge
protection ≥ 5KV with optics distribution , THD<10% at
596 ELEC-3.9.22
110 Volts AC, driver efficiency >90%, CCT: 3000K -
5700K, minimum CRI>70, etc., complete
a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE)
/ Lighting Technologies(Adornis) / SCHREDER (BRIKA) /
GE / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX
(LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER
NEO) /Capart(Premium)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
ELEC-3.9.22 20W
1 No 3125
a
ELEC-3.9.22 30W
1 No 3571
b
ELEC-3.9.22 45W
1 No 6161
c
ELEC-3.9.22 60W
1 No 7768
d
Supply and transportation of ......... LED Street light
Luminaire made of pressure diecast alluminium body with
powder coated, having protective toughned glass, Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's System efficacy >95lm/W and junction temprature <
70°C, with Ingrees protection IP65, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection ≥ 5KV
with optics distribution , THD<10% at 110 Volts AC, driver
597 ELEC-3.9.23 efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete .
a) Luminaire Make : WIPRO / PHILIPS (GREENLINE
EXTRA) / Lighting Technologies(Adornis) / SCHREDER
(VOLTANA / TECEO) / GE / / CROMPTON (HAWK-II) /
BAJAJ (EDGE+) / HALONIX (MODULAR / LUMOS-
SUPER) / HAVELLS (ENDURA CITYLINER STYLO+)
/Capart(Premium)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG.
ELEC-3.9.23 90W
1 No 13393
a
120W
ELEC-3.9.23
1 No 15179
b
204
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
150W
ELEC-3.9.23
1 No 16518
c
180W
ELEC-3.9.23
1 No 18304
d
Supply and transportation of .........LED Street light
Luminaire made of pressure diecast alluminium body with
powder coated, having protective toughned glass, Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's System efficacy >95lm/W and junction temprature
< 70°C, with Ingrees protection IP65, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection ≥ 5KV
598 ELEC-3.9.24
with optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete,
a) LUMINAIRE Makes: Surya / Fortune Art / Syska / VIN
/ GM / GreenLites / Gold Medal / HPL / Pharox / Cosmo /
Enrich / Renesola / Stanjo / Goldwyn
b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG /
LG.
20W
ELEC-3.9.24
1 No 2857
a
30W
ELEC-3.9.24
1 No 3393
b
45W
ELEC-3.9.24
1 No 5982
c
60W
ELEC-3.9.24
1 No 7321
d
90W
ELEC-3.9.24
1 No 12054
e
120W
ELEC-3.9.24
1 No 13839
f
150W
ELEC-3.9.24
1 No 15179
g
180W
ELEC-3.9.24
1 No 16964
h
205
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Sec-3), Driver surge protection 4KV, external Surge
protection ≥ 5KV with optics distribution Type II medium,
THD<10% at 110 Volts AC, driver efficiency >90%, w,
CCT: 3000K - 5700K, minimum CRI>70, etc., complete
a) LUMINAIRE Makes : Trinic / Pasolite / SEMTRONICS /
VRILISO / Prolite / SIEGER/OREVA/Koncept
b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG /
LG.
ELEC-3.9.25 20W
1 No 2545
a
ELEC-3.9.25 30W
1 No 3036
b
45W
ELEC-3.9.25
1 No 5357
c
60W
ELEC-3.9.25
1 No 6518
d
90W
ELEC-3.9.25
1 No 10268
e
120W
ELEC-3.9.25
1 No 11607
f
FLOOD LIGHTS
100W
ELEC-3.9.26
1 No 12054
b
120W
ELEC-3.9.26
1 No 14732
c
150W
ELEC-3.9.26
1 No 17411
d
206
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
ELEC-3.9.26 200W
1 No 20982
e
Supply and transportation of ......... LED Flood light
Luminaire made of pressure diecast alluminium housing
with powder coated, having toughned glass cover input
voltage range of 100 to 270 volts AC, power factor > 0.90,
high power LED's having efficacy > 95 lumines/watt and
junction temprature < 85 degree centegrade of IP 65,
Luminaire performance complies to IS 10322 (Part 5 /
601 ELEC-3.9.27 Sec-3), with optics, total hormonic destortion less than
10% at 110 Volts AC, driver efficiency >90% etc.,
complete
a) LUMINAIRE Makes: Surya / Pharox / Halonix / HPL /
Greenlights / Fortune Art / GM / Goldmedal / Syska /
Cosmo
b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG /
LG
50W
ELEC-3.9.27
1 No 5804
a
100W
ELEC-3.9.27
1 No 10714
b
120W
ELEC-3.9.27
1 No 13393
c
150W
ELEC-3.9.27
1 No 16071
d
200W
ELEC-3.9.27
1 No 18750
e
207
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
90W
ELEC-3.9.28
10714
b
120W
ELEC-3.9.28
13393
c
150W
ELEC-3.9.28
15179
d
90W
ELEC-3.9.29
9821
b
120W
ELEC-3.9.29
12500
c
150W
ELEC-3.9.29
14286
d
LED DRIVERS
208
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Warranty.
209
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 6 Sqmm 2 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
619 ELEC-4.1.6 1 RM 81
to IS:7098 (Part - I).
Makes: Delton / Payal / Gemscab/Orbit
Supply of 10 Sqmm 2 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
620 ELEC-4.1.7 to IS:7098 (Part - I). 1 RM 118
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 10 Sqmm 2 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
621 ELEC-4.1.8 to IS:7098 (Part - I) . 1 RM 103
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
Supply of 10 Sqmm 2 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
622 ELEC-4.1.9 1 RM 96
to IS:7098 (Part - I)
Makes: Delton / Payal / Gemscab/Orbit
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
623 ELEC-4.1.10 to IS:7098 (Part - I) 1 RM 120
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
624 ELEC-4.1.11 to IS:7098 (Part - I) 1 RM 103
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
625 ELEC-4.1.12 1 RM 96
to IS:7098 (Part - I).
Makes: Delton / Payal / Gemscab/Orbit
Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
626 ELEC-4.1.13 to IS:7098 (Part - I) 1 RM 136
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
627 ELEC-4.1.14 to IS:7098 (Part - I) 1 RM 118
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
628 ELEC-4.1.15 1 RM 109
to IS:7098 (Part - I)
Makes: Delton / Payal / Gemscab/Orbit.
Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
629 ELEC-4.1.16 to IS:7098 (Part - I) 1 RM 149
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
630 ELEC-4.1.17 to IS:7098 (Part - I) 1 RM 129
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
210
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming
631 ELEC-4.1.18 1 RM 121
to IS:7098 (Part - I) of Makes: Delton / Payal / Gemscab/
Orbit..
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
632 ELEC-4.1.19 confirming to IS:7098 (Part - I) 1 RM 190
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
633 ELEC-4.1.20 confirming to IS:7098 (Part - I). 1 RM 166
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
634 ELEC-4.1.21 1 RM 153
confirming to IS:7098 (Part - I)
Makes: Delton / Payal / Gemscab/ Orbit..
Supply of 35 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
635 ELEC-4.1.22 confirming to IS:7098 (Part - I) 1 RM 228
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 35 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
636 ELEC-4.1.23 confirming to IS:7098 (Part - I) 1 RM 195
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab
Supply of 35 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
637 ELEC-4.1.24 1 RM 181
confirming to IS:7098 (Part - I)
Makes: Delton / Payal / Gemscab/ Orbit..
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
638 ELEC-4.1.25 confirming to IS:7098 (Part - I) 1 RM 302
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
639 ELEC-4.1.26 confirming to IS:7098 (Part - I) 1 RM 258
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab .
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
640 ELEC-4.1.27 1 RM 241
confirming to IS:7098 (Part - I).
Makes: Delton / Payal / Gemscab/ Orbit..
Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
641 ELEC-4.1.28 confirming to IS:7098 (Part - I). 1 RM 387
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
642 ELEC-4.1.29 confirming to IS:7098 (Part - I) 1 RM 333
Makes: RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab .
211
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
643 ELEC-4.1.30 1 RM 311
confirming to IS:7098 (Part - I)
Makes: Delton / Payal / Gemscab/ Orbit.
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
644 ELEC-4.1.31 confirming to IS:7098 (Part - I) . 1 RM 503
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
645 ELEC-4.1.32 confirming to IS:7098 (Part - I) . 1 RM 434
RPG / Finolex / Finecab / Paragon / V-Guard / Fortune Art
/ Suncab.
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
646 ELEC-4.1.33 1 RM 403
confirming to IS:7098 (Part - I) .
Makes: Delton / Payal / Gemscab.
Supply of 120 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
647 ELEC-4.1.34 confirming to IS:7098 (Part - I) 1 RM 615
Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab / CMI
Supply of 120 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
648 ELEC-4.1.35 confirming to IS:7098 (Part - I). 1 RM 532
Makes : RPG / Finolex / Finecab / Paragon / V-Guard /
Fortune Art / Suncab.
Supply of 120 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
649 ELEC-4.1.36 1 RM 494
confirming to IS:7098 (Part - I) .
Makes: Delton / Payal / Gemscab.
Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
650 ELEC-4.1.37 confirming to IS:7098 (Part - I). 1 RM 700
Makes : Torent / Universal / Unicab / Havells / KEI /
Gloster.
Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
651 ELEC-4.1.38 confirming to IS:7098 (Part - I). 1 RM 630
Makes : Polycab / RPG / Finolex / Finecab / Paragon / V-
Guard
Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
652 ELEC-4.1.39 confirming to IS:7098 (Part - I) . 1 RM 564
Makes : Fortune Art / Suncab / Delton / Payal /
Gemscab.
Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
653 ELEC-4.1.40 confirming to IS:7098 (Part - I) . 1 RM 858
Makes : Torent / Universal / Unicab / Havells / KEI /
Gloster.
Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
654 ELEC-4.1.41 1 RM 739
confirming to IS:7098 (Part - I).
Makes : Polycab / RPG / Finolex / Finecab / V-Guard.
212
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 240 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
655 ELEC-4.1.42 confirming to IS:7098 (Part - I) . 1 RM 1089
Makes : Torent / Universal / Unicab / Havells / KEI /
Gloster.
Supply of 240 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
656 ELEC-4.1.42 1 RM 941
confirming to IS:7098 (Part - I)
Makes : Polycab / RPG / Finolex / Finecab.
Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
657 ELEC-4.1.44 1 RM 1330
confirming to IS:7098 (Part - I)
Makes : Torent / Universal / Unicab / Havells / KEI
Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
658 ELEC-4.1.45 1 RM 1151
confirming to IS:7098 (Part - I)
Makes : Polycab / RPG / Finolex / Finecab / Gloster
Supply of 400 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
659 ELEC-4.1.46 1 RM 1667
confirming to IS:7098 (Part - I) .
Makes : Torent / Universal / Unicab / KEI
Supply of 400 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
660 ELEC-4.1.47 1 RM 1439
confirming to IS:7098 (Part - I)
Makes : Polycab / RPG / Finolex / Finecab / Gloster
11 KV H.T. XLPE CABLES
213
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Fixing of Single compression brass cable
667 ELEC-4.2.4 glands for 3.5 core XLPE armoured cable for 400Sqmm 1 No 602
with brass washers complete.
Supply and Fixing of single compression brass cable
668 ELEC-4.2.5 glands for 4 core XLPE armoured cable up to 16.0 1 No 90
Sq.mm with brass washers complete.
Supply and Fixing of single compression brass cable
669 ELEC-4.2.6 glands for 3.5 core XLPE armoured cable from 25 Sqmm 1 No 130
to 50.0 Sq.mm with brass washers complete.
Supply and Fixing of Single compression brass cable
670 ELEC-4.2.7 glands for 3.5 core XLPE armoured cable from 70 Sqmm 1 No 243
to 150.0 Sq.mm with brass washers complete.
LUGS
4.3
Supply and fixing of crimping type copper lugs confirming
671 ELEC-4.3.1 to I.S specifications for cable upto 16 Sq.mm including 1 No 22
nuts and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
672 ELEC-4.3.2 to I.S specifications for cable of 25 Sq.mm including nuts 1 No 27
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
673 ELEC-4.3.3 to I.S specifications for cable of 35 Sq.mm including nuts 1 No 31
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
674 ELEC-4.3.4 to I.S specifications for cable of 50 Sq.mm including nuts 1 No 36
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
675 ELEC-4.3.5 to I.S specifications for cable of 70 Sq.mm including nuts 1 No 49
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
676 ELEC-4.3.6 to I.S specifications for cable of 95 Sq.mm including nuts 1 No 58
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
677 ELEC-4.3.7 to I.S specifications for cable of 120 Sq.mm including nuts 1 No 81
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
678 ELEC-4.3.8 to I.S specifications for cable of 150 Sq.mm including nuts 1 No 99
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
679 ELEC-4.3.9 to I.S specifications for cable of 185 Sq.mm including nuts 1 No 139
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
680 ELEC-4.3.10 to I.S specifications for cable of 240 Sq.mm including nuts 1 No 202
and bolts with connections.
Supply and fixing of crimping type copper lugs confirming
681 ELEC-4.3.11 to I.S specifications for cable of 300 Sq.mm including nuts 1 No 269
and bolts with connections.
214
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of crimping type copper lugs confirming
682 ELEC-4.3.12 to I.S specifications for cable of 400 Sq.mm including nuts 1 No 382
and bolts with connections.
Supply and fixing of crimping type aluminium lugs
683 ELEC-4.3.13 confirming to I.S specifications for cable upto 16 Sq.mm 1 No 13
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
684 ELEC-4.3.14 confirming to I.S specifications for cable of 25 Sq.mm 1 No 18
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
685 ELEC-4.3.15 confirming to I.S specifications for cable of 35 Sq.mm 1 No 22
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
686 ELEC-4.3.16 confirming to I.S specifications for cable of 50 Sq.mm 1 No 27
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
687 ELEC-4.3.17 confirming to I.S specifications for cable of 70 Sq.mm 1 No 31
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
688 ELEC-4.3.18 confirming to I.S specifications for cable of 95 Sq.mm 1 No 36
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
689 ELEC-4.3.19 confirming to I.S specifications for cable of 120 Sq.mm 1 No 40
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
690 ELEC-4.3.20 confirming to I.S specifications for cable of 150 Sq.mm 1 No 45
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
691 ELEC-4.3.21 confirming to I.S specifications for cable of 185 Sq.mm 1 No 49
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
692 ELEC-4.3.22 confirming to I.S specifications for cable of 240 Sq.mm 1 No 67
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
693 ELEC-4.3.23 confirming to I.S specifications for cable of 300 Sq.mm 1 No 90
including nuts and bolts with connections.
Supply and fixing of crimping type aluminium lugs
694 ELEC-4.3.24 confirming to I.S specifications for cable of 400 Sq.mm 1 No 117
including nuts and bolts with connections.
HEAT SHRINKABLE LT CABLE JOINTS
4.4
Supply of heat shrinkable straight through joint Indoor /
Out door for L.T. XLPE Armoured 1100V grade cable of
seamless type outer tubing with necessary accessories
695 ELEC-4.4.1 and suitable clamps including cost and conveyance of 1 No 1226
materials complete for 10 to 16 Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang.
215
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of heat shrinkable straight through joint Indoor /
Out door for L.T. XLPE Armoured 1100V grade cable of
seamless type outer tubing with necessary accessories
696 ELEC-4.4.2 and suitable clamps including cost and conveyance of 1 No 1455
materials complete for 25 to 50 Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang..
Supply of heat shrinkable straight through joint Indoor /
Out door for L.T. XLPE Armoured 1100V grade cable of
seamless type outer tubing complete with necessary
697 ELEC-4.4.3 accessories and suitable clamps including cost and 1 No 2102
conveyance of materials complete for 70 to 185 Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang.
Supply and errecting heat shrinkable straight through joint
Indoor / Out door for L.T. XLPE Armoured 1100V grade
cable of seamless type outer tubing with necessary
accessories and suitable clamps including cost and
698 ELEC-4.4.4 1 No 3773
conveyance of materials and all labour charges etc.,
complete for 240 to 300 Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang.
Supply of heat shrinkable straight through joint Indoor /
Out door for L.T. XLPE Armoured 1100V grade cable of
seamless type outer tubing with necessary accessories
699 ELEC-4.4.5 and suitable clamps including cost and conveyance of 1 No 5120
materials complete for 400 Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang..
3 CORE 11 KV HT CABLE STRAIGHT THROUGH
JOINTS
Providing and erecting heat shrinkable straight through
joint out door / indoor for H.T, XLPE Insulated armoured
cable 11000V grade of seamless type outer tubing with
necessary accessories and suitable clamps duly erected
700 ELEC-4.4.6 and connected to the supply for the following multi core 1 No 13924
cables including cost and conveyance of materials and
all labour charges etc., complete for 16 to 35Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang..
Providing and erecting heat shrinkable straight through
joint out door / indoor for H.T, XLPE Insulated armoured
cable 11000V grade of seamless type outer tubing with
necessary accessories and suitable clamps duly erected
701 ELEC-4.4.7 and connected to the supply for the following multi core 1 No 16619
cables including cost and conveyance of materials and
all labour charges etc., complete for 50 to 95Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang.
Providing and erecting heat shrinkable straight through
joint out door / indoor for H.T, XLPE Insulated armoured
cable 11000V grade of seamless type outer tubing with
necessary accessories and suitable clamps duly erected
702 ELEC-4.4.8 and connected to the supply for the following multi core 1 No 21559
cables including cost and conveyance of materials and
all labour charges etc., complete for 120 to 185Sqmm.
Makes: Raychem / M Seal / Denson / Multy / Transeal -
Hongshang..
216
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
HT END TERMINATION KITS
217
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Transportation of Outer dia 160mm and Inner
dia 136mm double walled corrugated HDPE duct made as
714 ELEC-4.5.6 1 RM 340
per specification BSEN - 500 86/IS 14930 Part-II.
Makes:DURA LINE (Dura Guard) or its equivalent make.
Supply and Transportation of Outer dia 180mm and Inner
dia 152mm double walled corrugated HDPE duct made as
715 ELEC-4.5.7 1 RM 445
per specification BSEN - 500 86/IS 14930 Part-II.
Makes:DURA LINE (Dura Guard) or its equivalent make.
Supply and Transportation of Outer dia 200mm and Inner
dia 170mm double walled corrugated HDPE duct made as
716 ELEC-4.5.8 per specification BSEN - 500 86/IS 14930 Part-II. 1 RM 543
Makes:DURA LINE (Dura Guard) or its equivalent make.
CABLE TRAYS
4.6
Supply and Installation of 600mm x 75mm x 2mm thick hot
dip GI perforated cable tray with cover along with required
717 ELEC-4.6.1 angle supports, with coupler plates, Anchor bolts and nuts 1 RM 1204
etc complete and the tray should be fitted on the wall /
Ceiling etc. complete.
Supply and Installation of 600mm x 50mm x 2mm thick GI
perforated cable tray with cover along with required angle
718 ELEC-4.6.2 supports, with coupler plates, Anchor bolts and nuts etc 1 RM 871
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
Supply and Installation of 450mm x 50mm x 2mm thick GI
perforated cable tray with cover along with required angle
719 ELEC-4.6.3 supports, with coupler plates, Anchor bolts and nuts etc 1 RM 779
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
Supply and Installation of 300mm x 50mm x 2mm thick GI
perforated cable tray with cover along with required angle
720 ELEC-4.6.4 supports, with coupler plates, Anchor bolts and nuts etc 1 RM 660
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
Supply and Installation of 150mm x 50mm x 2mm thick GI
perforated cable tray with cover along with required angle
721 ELEC-4.6.5 supports, with coupler plates, Anchor bolts and nuts etc 1 RM 368
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
Supply and Installation of 150mm x 50mm x 2mm thick GI
Ladder type cable tray along with required angle supports,
722 ELEC-4.6.6 with coupler plates, Anchor bolts and nuts etc complete 1 RM 189
and the tray should be fitted on the wall / Ceiling etc.
complete.
Supply and Installation of 300mm x 50mm x 2mm thick GI
Ladder type cable tray along with required angle supports,
723 ELEC-4.6.7 with coupler plates, Anchor bolts and nuts etc complete 1 RM 283
and the tray should be fitted on the wall / Ceiling etc.
complete.
Supply and Installation of 600mm x 75mm x 2mm thick GI
Ladder type cable tray along with required angle supports,
724 ELEC-4.6.8 with coupler plates, Anchor bolts and nuts etc complete 1 RM 519
and the tray should be fitted on the wall / Ceiling etc.
complete.
218
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Note: Perforated cable trays provided without cover 30%
may be deducted from above rates.
SECTION - 5
FANS
5.1
219
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust
737 ELEC-5.1.13 fan with metallic blades with Mark. 1 No 2991
Makes: Crompton / Almounard / Havells Turbo Force
Supply of 18" (450mm) ISI, 900 RPM Heavy duty exhaust
738 ELEC-5.1.14 fan with metallic blades with Mark. 1 No 3806
Makes: Crompton / Almounard / Havells Turbo Force
WATER HEATERS (Conventional & Solar)
5.2
Supply, Transportation and fixing of storage / Pressure
type Vertical / Horizontal 230/250V single phase
2000watts ISI mark 5 Star rated water heater with SS tank
and ABS plastic body of 15 Ltrs capacity to withstand up
to 6.5 bar of water pressure including all standard
739 ELEC-5.2.1 accessories and dead weight pressure reducing valve on 1 No 8850
out let side, including cost of 2 Nos nylon / PVC / Metallic
hose pipe, testing and all labour charges etc., complete.
Makes: Crompton model No. solarium plus SWH 725,
Class 1 rated or its equivalent make of Bajaj / Venus /
Racold / Usha / V-Guard / Havells.
Supply, Transportation and fixing of storage / Pressure
type Vertical / Horizontal 230/250V single phase
2000watts ISI mark 5 Star rated water heater with SS tank
and ABS plastic body of 25 Ltrs capacity to withstand up
to 6.5 bar of water pressure including all standard
740 ELEC-5.2.2 accessories and dead weight pressure reducing valve on 1 No 10372
out let side, including cost of 2 Nos nylon / PVC / Metallic
hose pipe, testing and all labour charges etc., complete.
Makes: Crompton model No. solarium plus SWH 725,
Class 1 rated or its equivalent make of Bajaj / Venus /
Racold / Usha / V-Guard / Havells
Supply,Transportation,erection and Commissioning of 500
LPD Non-Pressuried-Evacuated Tube Collector type Solar
Water heating System with temperature application of 60
degrees with Stain less steel - 304L grade inner tank with
PUF Insulation and Alluminum Cladding for Outer
741 ELEC-5.2.3 1 No 70610
Cover,Suitable EPDM rubber pipe connection from
Collector to Solar Tank with electrical Heating back up
etc., with 3 years Guarantee for Solar system and
additional 2 years warranty. Make:TATA / BHEL/ BOSCH/
ETC/V-GUARD /RACOLD
Supply,Transportation,erection and Commissioning of 300
LPD Non-Pressuried-Evacuated Tube Collector type Solar
Water heating System with temperature application of 60
degrees with Stain less steel - 304L grade inner tank with
PUF Insulation and Alluminum Cladding for Outer
742 ELEC-5.2.4 1 No 55733
Cover,Suitable EPDM rubber pipe connection from
Collector to Solar Tank with electrical Heating back up
etc., with 3 years Guarantee for Solar system and
additional 2 years warranty. Make:TATA / BHEL/ BOSCH/
ETC/V-GUARD /RACOLD
Supply,Transportation,erection and Commissioning of 200
LPD Non-Pressuried-Evacuated Tube Collector type Solar
Water heating System with temperature application of 60
743 ELEC-5.2.5 degrees with Stain less steel - 304L grade inner tank with 1 No 36876
PUF Insulation and Alluminum Cladding for Outer
Cover,Suitable EPDM rubber pipe connection from
Collector to Solar Tank with electrical Heating back up
220
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
etc., with 3 years Guarantee for Solar system and
additional 2 years warranty Make:TATA / BHEL/ BOSCH/
ETC/V-GUARD /RACOLD
ACCESSORIES FOR WATER HEATERS
5.3
Heating element of 1.5 / 2.0 / 3.0 KW.
744 ELEC-5.3.1 1 No 359
0 0
Supply of thermostat with range 30 to 90 C.Adjustable
745 ELEC-5.3.2 and suitable for 25 to 50 Ltrs. Capacity. 1 No 247
221
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Transportation of 1HP 15 Stage single phase
755 ELEC-5.4.8 ISI submersible motor pumpset suitable for 4" Bore well. 1 No 15469
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 1HP 15 Stage single phase
ISI submersible motor pumpset suitable for 4" Bore well.
756 ELEC-5.4.9 1 No 14732
Makes: Pluga / U-Neel / Sterling / Falcon / Flowell /
Waterman / Kumar/ Aryan Varsha / Lubi / Unnati zen
Supply and Transportation of 1.50HP 21 Stage single
phase ISI submersible motor pumpset suitable for 4" Bore
757 ELEC-5.4.10 1 No 18750
well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 1.50HP 21 Stage single
phase ISI submersible motor pumpset suitable for 4" Bore
758 ELEC-5.4.11 well. 1 No 17857
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 2HP 25 Stage single phase
759 ELEC-5.4.12 ISI submersible motor pumpset suitable for 4" Bore well. 1 No 22500
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 2HP 25 Stage single phase
ISI submersible motor pumpset suitable for 4" Bore well.
760 ELEC-5.4.13 1 No 21429
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 3HP 10-15 Stage single
phase ISI submersible motor pumpset suitable for 4" Bore
761 ELEC-5.4.14 1 No 19643
well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 3HP 10-15 Stage single
phase ISI submersible motor pumpset suitable for 4" Bore
762 ELEC-5.4.15 well. 1 No 17857
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
STAR RATED THREE PHASE SUBMERSIBLE MOTOR
PUMP SETS.
222
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
223
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Transportation of 10HP, 20-24 Stage, 5star
rated, Three phase ISI submersible motor pumpset
780 ELEC-5.4.33 suitable for 6" Bore well. 1 No 43393
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 12.5HP, 8-12 Stage,5star
rated, Three phase ISI submersible motor pumpset
781 ELEC-5.4.34 1 No 41071
suitable for 6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/ Lubi
Supply and Transportation of 12.5HP, 8-12 Stage,5star
rated, Three phase ISI submersible motor pumpset
782 ELEC-5.4.35 suitable for 6" Bore well. 1 No 36964
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 12.5HP, 16-24Stage,5star
rated, Three phase ISI submersible motor pumpset
783 ELEC-5.4.36 1 No 50000
suitable for 6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/ Lubi
Supply and Transportation of 12.5HP, 16-24Stage,5star
rated, Three phase ISI submersible motor pumpset
784 ELEC-5.4.37 suitable for 6" Bore well. 1 No 45000
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 15HP, 8-12 Stage,5star
rated, Three phase ISI submersible motor pumpset
785 ELEC-5.4.38 1 No 53571
suitable for 6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/ Lubi
Supply and Transportation of 15HP, 16-24 Stage,5star
rated, Three phase ISI submersible motor pumpset
786 ELEC-5.4.39 1 No 55357
suitable for 6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB / Lubi
Supply and Transportation of 20HP 10-20 Stage, 5 star
Three phase ISI submersible motor pumpset suitable for
787 ELEC-5.4.40 1 No 64286
6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB / Lubi
Supply and Transportation of 20HP 30-40 Stage, 5 star
Three phase ISI submersible motor pumpset suitable for
788 ELEC-5.4.41 1 No 66964
6" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB / Lubi
SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR
PUMP SETS AS PER IS 14220 : 1994
224
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Transportation of 3HP Single phase open well
793 ELEC-5.4.46 ISI submersible motor pumpset. 1 No 15938
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 3HP Single phase open well
ISI submersible motor pumpset.
794 ELEC-5.4.47 1 No 15179
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
THREE PHASE OPEN WELL SUBMERSIBLE PUMP
SETS AS PER IS 14220 : 1994
225
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Transportation of 1.0HP Single phase ISI
Mono block CI body motor pumpset (25x25mm).
806 ELEC-5.4.59 1 No 6339
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 1.5HP Single phase ISI
807 ELEC-5.4.60 Mono block CI body motor pumpset (32x25mm). 1 No 8906
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 1.5HP Single phase ISI
Mono block CI body motor pumpset (32x25mm).
808 ELEC-5.4.61 1 No 8482
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 2HP Single phase ISI self
809 ELEC-5.4.62 priming Mono block IP44 motor pumpset (40x40mm). 1 No 11250
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 2HP Single phase ISI self
priming Mono block IP44 motor pumpset (40x40mm).
810 ELEC-5.4.63 1 No 10714
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 2HP Three phase ISI self
811 ELEC-5.4.64 priming Mono block IP44 motor pumpset (40x40mm). 1 No 13125
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Supply and Transportation of 2HP Three phase ISI self
priming Mono block IP44 motor pumpset (40x40mm).
812 ELEC-5.4.65 1 No 12500
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 3HP Three phase ISI self
813 ELEC-5.4.66 priming Mono block IP44 motor pumpset (50x50mm). 1 No 17813
Makes: Kirloskar / Crompton / Texmo / KSB
Supply and Transportation of 3HP Three phase ISI self
priming Mono block IP44 motor pumpset (50x50mm).
814 ELEC-5.4.67 1 No 16964
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
Supply and Transportation of 5HP Three phase ISI self
815 ELEC-5.4.68 priming Mono block IP44 motor pumpset (80x80mm). 1 No 21563
Makes: Kirloskar / Crompton / Texmo / KSB
Supply and Transportation of 5HP Three phase ISI self
priming Mono block IP44 motor pumpset (80x80mm).
816 ELEC-5.4.69 1 No 20536
Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Aryan
Varsha / Unnati zen
CONTROL PANEL BOARD FOR MOTORS
Fabrication , transportation and supply of suitable size
panel board for single phase submersible motor up to 1.5
HP consisting of relay, Contactor, starting and running
817 ELEC-5.4.70 1 No 4312
capacitors, Voltmeter, Ammeter, indicator lamps, MCB ,
on/off switch.
Makes: LT LK / BCH / Crompton/ Siemens.
Fabrication , transportation and supply of suitable size
panel board for single phase submersible motor above 2
Hp to 3 HP consisting of relay, Contactor, starting and
818 ELEC-5.4.71 1 No 4941
running capacitors, Voltmeter, Ammeter, indicator lamps,
MCB , on/off switch.
Makes; LT LK / BCH / Crompton/ Siemens.
226
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 32mm dia PE 80 Grade material 12.5 kg / Cm2
ISI Mark HDPE pipe upto 600 feet
819 ELEC-5.4.72 1 Mtr 90
Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya /
Godavari.
Supply of 40mm dia PE 80 Grade material 16 kg / Cm2 ISI
Mark HDPE pipe above 600 feet to 1000 feet
820 ELEC-5.4.73 1 Mtr 144
Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya /
Godavari.
Supply of 40mm dia PE 80 Grade material 20 kg / Cm2 ISI
HDPE pipe above 1000 feet
821 ELEC-5.4.74 1 Mtr 162
Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya /
Godavari.
Supply and fixing of 32mm x 25mm dia stainless steel
822 ELEC-5.4.75 Nipple. 1 No 135
Supply and fixing of 40mm x32mm dia stainless steel
823 ELEC-5.4.76 Nipple. 1 No 157
Supply and fixing of 50mm x 40mm dia stainless steel
824 ELEC-5.4.77 Nipple 1 No 337
Supply and fixing of 32mm dia brass Non return valve ISI
827 ELEC-5.4.80 make 1 No 449
Supply and fixing of 40mm dia brass Non return valve ISI
828 ELEC-5.4.81 make 1 No 674
227
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
……do….. Upto 7.5 HP with DOL Starter.
830 ELEC-5.4.83 Makes: Crompton / L&T / Siemens. 1 No 7186
……do…..Above 15 HP up to 20 HP
with Automatic Star Delta Starter. Makes: Crompton / L&T
/ Siemens.
832 ELEC-5.4.85 1 No 16960
ELEC-5.5.3 Supply of 1.0 / 1.5 Ton brand new Rotary type sealed
835 1 No 8534
a compressor.Make: Hitachi / Mitsubishi / Toshiba
ELEC-5.5.3 Supply of 1.0 / 1.5 Ton brand new Rotary type sealed
1 No 7321
b compressor.Make: Tecumseh
228
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton
837 ELEC-5.5.5 1 No 1428
Window A.C.Unit Makes : Crompton / AU.
839 ELEC-5.5.7 Thermostat switch suitable for 1.0 / 1.5 / 2.0 Ton A.C.Unit. 1 No 368
848 ELEC-5.5.16 Fan blade for 1.0 / 1.5 Ton A.C.Machine. 1 No 503
849 ELEC-5.5.17 Grill of 1.0 / 1.5 ton A.C. Machine (for assembled Units). 1 No 384
850 ELEC-5.5.18 Grill of 1.0 / 1.5 ton A.C. Machine of branded units. 1 No 1527
229
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Flushing the line, leak testing, leak stopping, vaccumming,
ELEC-5.5.20
852 dehydrating and charging the gas in the refrigeration 1 No 1347
a
system for 1.0/ 1.5 Ton Window A.C.Unit.
Flushing the line, leak testing, leak stopping, vaccumming,
ELEC-5.5.20
dehydrating and charging the gas in the refrigeration 1 No 1797
b
system for 2.0 Ton Window A.C.Unit.
Flushing the line, leak testing, leak stopping, vaccumming,
ELEC-5.5.21
853 dehydrating and charging the gas in the refrigeration 1 No 1886
a
system for 1.0 / 1.5 Ton Split A.C.Unit.
Flushing the line, leak testing, leak stopping, vaccumming,
ELEC-5.5.21
dehydrating and charging the gas in the refrigeration 1 No 2515
b
system for 2.0 Ton Split A.C.Unit.
230
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of split AC unit with high wall mounted indoor unit
and outdoor condencing unit Hermetically sealed
compressor suitable for operation on 230V, 50Hz, 1Phase
AC supply capable of performing cooling dehumidifying air
865 ELEC-5.5.33
circulating and filtering with cooling and condensing units
with 3 mts of copper piping, insulation kit and 4 mts of 3
core copper flexible cable including cordless remote
control etc.
231
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
……do…… 0.8 TR 3 Star capable of delivering 9600
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 21569
j 410A, COP not less than 2.8. Makes: Blue Star
3HW09VCFU / Carrier Supiria / Hitachi / Daikin
……do…… 1.0 TR 3 Star capable of delivering 12000
BTU/hr and above with operating on refrigerant R-32/ R-
ELEC-5.5.33
410A, COP not less than 3.2. Makes: Mitsubishi MS- 1 No 31266
k
HK13VA / O General ASGA12BMTA / Toshiba
RAS13S3KS
……do…… 1.0 TR 3 Star capable of delivering 12000
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 26463
l 410A, COP not less than 2.8. Makes: Blue Star
3HW12VCU / Carrier Supiria / Hitachi / Daikin
……do…… 0.8 TR 5 Star capable of delivering 9600
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 30223
m 410A, COP not less than 3.6. Makes: Mitsubishi MS-
GK10VA / O General / Toshiba
……do…… 0.8 TR 5 Star capable of delivering 9600
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 26191
n 410A, COP not less than 3.2. Makes: Blue Star
5HW09SAFU / Carrier Supiria / Hitachi / Daikin
……do…… 1.0 TR 5 Star capable of delivering 12000
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 34528
o 410A, COP not less than 3.6. Makes: Mitsubishi MS-
GK13VA / O General / Toshiba RAS13S3KPS
……do…… 1.0 TR 5 Star capable of delivering 12000
ELEC-5.5.33 BTU/hr and above with operating on refrigerant R-32/ R-
1 No 29816
p 410A, COP not less than 3.2. Makes: Blue Star
5HW12SBU / Carrier Supiria / Hitachi / Daikin
Inverter Split AC Unts (Cooling Only)
Supply of INVERTER Model Cool type split AC unit with
high wall mounted Single Split indoor unit and outdoor
condencing unit Hermetically sealed compressor suitable
for operation on 230V, 50Hz, 1Phase AC supply capable
866 ELEC-5.5.34 of performing Heat cool dehumidifying air circulating and
filtering with cooling and condensing units with 3 mts of
copper piping, insulation kit and 4 mts of 4 core copper
flexible chord with cordless remote control etc., dual
barrier coating in order to protect coil form oxidigation.
1.5, 1.8 & 2.0TR Split ACs
……do…… 1.5 TR capable of delivering 18000 BTU/hr
ELEC-5.5.34 and above with operating on refrigerant R-32/ R-410A,
1 No 53741
a COP not less than 4.5. Makes: Mitsubishi MS-GN18VF / O
General ASGA18JCC
……do…… 1.5 TR capable of delivering 18000 BTU/hr
ELEC-5.5.34 and above with operating on refrigerant R-32/ R-410A,
1 No 48484
b COP not less than 3.1. Makes: Toshiba RAS18N3KCV /
Blue Star 5CNHW18PAFU / Daikin FTKC50NVM / Hitachi
……do…… 1.8 TR capable of delivering 21600 BTU/hr
and above with operating on refrigerant R-410A / R-32
ELEC-5.5.34
with COP not less than 4.5. Makes: 1 No 57456
c
Mitsubishi MS-GN22VF / Toshiba RAS22N3KCV / O
General
232
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
……do……2.2 TR / 2.0 TR capable of delivering 24000
ELEC-5.5.34 BTU/hr and above with operating on refrigerant R-410A /
1 No 70325
d R-32 with COP not less than 4.0. Makes:
Mitsubishi MS-GN26VF / O General ASGA24JCC
……do…… 2.0 TR capable of delivering 24000 BTU/hr
ELEC-5.5.34 and above with operating on refrigerant R-410A / R-32
1 No 61988
e with COP not less than 3.5. Makes: Blue
star 5CNHW24TAFU / Hitachi / Daikin
233
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
……do……3.0 TR Non Inverter type Three Phase
capable of delivering 36000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 109022
e
less than 3.0. Makes: Mitsubishi PL-P36BAK / O
General
……do……3.0 TR Non Inverter type Three Phase
capable of delivering 36000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 99688
f
less than 2.5. Makes: Blue star 5C36SGU2 /
Daikin FCRN90FXV16 / Carrier 40GKX-036RB
……do……3.5 TR Non Inverter type Three Phase
capable of delivering 42000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 122706
g
less than 3.2. Makes: Mitsubishi PL-P42BAK / O
General AUG45AB
……do……3.5 TR Non Inverter type Three Phase
capable of delivering 42000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 110834
h
less than 2.5. Makes: Daikin FCRN100FXV16 /
Bluestar / Carrier
……do……4.0 TR Non Inverter type Three Phase
capable of delivering 48000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 128688
i
less than 2.65. Makes: O General AUG54AB /
Mitsubishi.
……do……4.0 TR Non Inverter type Three Phase
capable of delivering 48000 BTU / hr and above with
ELEC-5.5.35
operating on refrigerant R-32 / R-410A, COP not 1 No 117813
j
less than 2.1. Makes: Blue Star SC48SGU2 /
Carrier 40GKX-048RB / Daikin FCRN125FXV16
……do…… 1.5 TR Inverter type Single Phase capable of
delivering 18000 BTU / hr and above with operating on
ELEC-5.5.35 refrigerant R-32 / R-410A, COP not less than
1 No 75581
k 4.2. dual barrier coating in order to protect coil form
oxidigation. Makes: Mitsubishi PLY-SP18BA / Toshiba
RAV-SE561UP / O General.
……do……2.0TR Inverter type Single Phase capable of
delivering 24000 BTU / hr and above with operating on
ELEC-5.5.35 refrigerant R-32 / R-410A, COP not less than
1 No 80475
l 4.3. dual barrier coating in order to protect coil form
oxidigation. Makes: Mitsubishi PLY-SP24BA / O General /
Toshiba
……do……2.0TR Inverter type Single Phase capable of
delivering 24000 BTU / hr and above with operating on
ELEC-5.5.35
refrigerant R-32 / R-410A, COP not less than 1 No 74584
m
2.8. dual barrier coating in order to protect coil form
oxidigation. Makes: Blue Star/ Daikin / Carrier.
……do……2.5 TR Inverter type Single Phase capable of
delivering 30000 BTU / hr and above with operating on
ELEC-5.5.35 refrigerant R-32 / R-410A, COP not less than
1 No 101681
n 4.2. dual barrier coating in order to protect coil form
oxidigation. Makes: Mitsubishi PLY-SP30BA / O General /
Toshiba RAV-SE801UP
……do……3.0 TR Inverter type Three Phase capable of
delivering 36000 BTU / hr and above with operating on
ELEC-5.5.35
refrigerant R-32 / R-410A, COP not less than 1 No 123975
o
4.2. dual barrier coating in order to protect coil form
oxidigation. Makes: Mitsubishi PLY-SP36BA / O General /
234
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Toshiba RAV-SE1001UP
235
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Consumption in Cooling mode not more than 1635 W and
in heating mode not more than 1490 W co-efficient of
performance in cooling mode not less than 3.21 & in
heating mode not less than 3.54,dehumidifing
Aircirculating and filtering with cooling and
condensing unit duly insulated and 3 core copper
flexible chord of required length etc with 2 years
comprehensive warranty and 5 years warranty on
compressor etc complete.
Indoor Unit a) Noise level: in Cooling mode not more than
49 DB(A)
b) Air flow rate: 16.1 to 10.6 meter cube per minute(570 to
375 cfm)
c) Out door Unit a) Noise level: In Cooling mode not more
than 49 DB(A).
Make: Daikin FTXS 50 FVMA / or its equivalent model of
Toshiba / Mitsubuishi / O General.
Supply, transportation of 1.8 / 2.0 TR capacity , ( HEAT
and COOL) high wall mounted indoor evaporator unit and
outdoor condencing unit with Heat pump, cord less remote
control and hermetically sealed rotary compressor
operating on refrigerent R-410A suitable for operation on
"230V, 50Hz, single phase A.C supply, capable of
performing of cooling capacity 6.01KW and above and
heating capacity 6.15 KW and above, Running current in
cooling mode less than 8.26 Amps, & in Heating mode
less than 7.99 Amps , Power Consumption in Cooling
mode not more than 1870W and in heating mode not
more than 1800 W, co-efficient of performance in cooling
mode not less than 3.21 & in heating mode not less than
870 ELEC-5.5.38 1 No 72500
3.40, dehumidifing Aircirculating and filtering with cooling
and condensing unit duly insulated and 3 core copper
flexible chord of required length etc with 2 years
comprehensive warranty and 5 years warranty on
compressor etc complete.
Indoor Unit a) Noise level: in Cooling mode not more than
48 DB(A).
b) Air flow rate: 18.2 to 11.8 meter cube per minute (641
to 418 cfm).
c) Out door Unit a) Noise level: In Cooling mode not more
than 52 DB(A).
Make: Daikin Model No FTXS 60 JXVI or its equivalent
model of Toshiba / Mitsubuishi / O General
STABILIZERS
236
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
237
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
EICHER model 11:10 with 100 H. P direct injestion 4
891 ELEC-5.6.9 stroke engine with one spare wheel 3800 mm cabin high 1 No 628814
deck with jangla (full body) (4 wheeler) for generator
6.1 SWAGED POLES AND GARDEN POSTS
OCTOGONAL POLEs
238
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
door opening arrangement, including the supply of
suitable boards with bakelite sheet as per IS specification
suitable to withstand the wind speed of 180 KMPH for 12
mtrs height Pole having dimensions Bottom 240mm, Top
100mm with 4mm thick, base plate 320 x320 x20mm and
4 Nos of M24 x 850 long 'J' bolts along with template.
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of hot-dip
galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate with
door opening arrangement, including the supply of
suitable
boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180
899 ELEC-6.1.8 1 No 24155
KMPH for 9 Mtrs Mounting height Pole having
dimensions Bottom 185 mm,. Top 70mm with 3mm thick,
base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000
long 'J' bolts along with templates. Including Supply of
1.5M Dragon type decorative galvanised double arm
with PU Painted bracket.
Makes : Bajaj / Valmont / TRANSRAIL
Fabrication, Transportation and supply of hot-dip
galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate with
door opening arrangement, including the supply of
suitable
boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180
900 ELEC-6.1.9 1 No 20661
KMPH for 9 Mtrs Mounting height Pole having
dimensions Bottom 185 mm,. Top 70mm with 3mm thick,
base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000
long 'J' bolts along with templates. Including Supply of
1.5M Dragon type decorative galvanised Single arm
with PU Painted bracket.
Makes : Bajaj / Valmont / TRANSRAIL
Fabrication, Transportation and supply of hot-dip
galvanized PU Paint finish Curved Octogonal Pole with
BSEN - 10025 grade S 355 JO steel plate for shaft, IS
2062 for base plate with door opening arrangement,
including the supply of suitable boards with bakelite sheet
and MCB's as per IS specification suitable to withstand
901 ELEC-6.1.10 the 1 No 26500
wind speed of 180 KMPH for 9 Mtrs Mounting height
Curved Pole having dimensions Bottom 180 mm,. Top
85mm with 3mm thick, base plate 400 x 400 x 20mm and
4 Nos of M24 x 750 long 'J' bolts along with templates.
Including Supply of 0.2M long Single arm bracket.
Makes : Bajaj / Valmont / TRANSRAIL
POLE BRACKETS
Fabrication, Transportation and supply of 1.0 Mtr Length
Single Arm Bracket made with MS galvanized 40mm /
902 ELEC-6.1.11 50mm dia Pipe. 1 No 1123
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
239
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Fabrication, Transportation and supply of 1.50 Mtr Length
Single Arm Bracket made with MS galvanized 40mm /
903 ELEC-6.1.12 50mm dia Pipe. 1 No 1482
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of 1 Mtr length
Double Arm Bracket made with MS galvanized 40mm /
904 ELEC-6.1.13 50mm dia Pipe. 1 No 1321
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of 1.50 Mtr length
Double Arm Bracket made with MS galvanized 40mm /
905 ELEC-6.1.14 50mm dia Pipe. 1 No 2358
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of 1.5 Mtr Length
Single Arm suitable size decorative galvanized Bracket
906 ELEC-6.1.15 with PU paint colour finish etc complete. 1 No 4492
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of 1.5 Mtr Length
Double Arm suitable size decorative galvanized Bracket
907 ELEC-6.1.16 with PU paint colour finish etc complete. 1 No 7636
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, Transportation and supply of of 1.5mtrs
sword type decorative double arm bracket with dooms
either sides complete with all accessories with MS
908 ELEC-6.1.17 1 No 4244
galvanized 40mm / 50mm dia Pipe.
Makes:Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
HIGH MAST POLES
240
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
dip galvanized and suiatble for wind velocity of 180 KMPH
as per IS 875 part 3 including head frame, 2 point
suspension system with steel rope 6mm dia (7/19)
construction double drum winch / power tool operating
speed of 900 RPM, and necessary cable trailer
connections and single speed motor with M24 x 800 mm
foundation bolts of required quantity with GLS type
aviation twin lamp.
Makes: Bajaj / Valmont / TRANSRAIL / SKIPPER /
LAASMA
Fabrication, transportation and supply of 20 Mtrs Polygon
High Mast with two sections of Bottom 4mm thick and Top
section with 3mm thick of Bottom 410mm and Top 150mm
dia with BSEN - 10025 grade S 355 JO steel plate for
shaft, IS 2062 for base plate, having a base plate of size
570mm dia 25mm thick with its accessories. Mast shall be
in single section for 12 Mtrs and 2 sections for 16 and 20
Mtrs. Mast shall be hot dip galvanized and suiatble for
911 ELEC-6.1.20 wind velocity of 180 KMPH as per IS 875 part 3 including 1 No 158461
head frame, 2 point suspension system with steel rope
6mm dia (7/19) construction double drum winch / power
tool operating speed of 900 RPM, and necessary cable
trailer connections and single speed motor with M24 x
800 mm foundation bolts of required quantity with GLS
type aviation twin lamp.
Makes: Bajaj / Valmont / TRANSRAIL / SKIPPER
/LAASMA
FEEDER PILLAR BOXES
Supply and fixing of suitable out door type feeder piller
box made with 14 SWG CRCA sheet after 7 tank process
including S & F of Legrand / Schnieder / L&T make 40-
912 ELEC-6.1.21 63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 1 No 17400
Sqmm 3 core copper cable for internal wiring, contactor,
connectors and provision for energy meter etc., complete
for finished item of work.
Supply and fixing of suitable out door type feeder piller
box made with 14 SWG CRCA sheet after 7 tank process
including S & F of Legrand / Schnieder / L&T make 40-
913 ELEC-6.1.22 63A FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 1 No 17944
Sqmm 3 core copper cable for internal wiring , contactor,
connectors and provision for energy meter etc., complete
for finished item of work.
ERRECTION HIGH MAST POLES
Earth work exacavation with a approximate quantity of 4.0
Cum for errection of 12 Mtrs high mast and refilling with a
quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade
concrete and (80 Kgs) reinforced steel of 12mm / 10mm /
914 ELEC-6.1.23 1 No 25153
8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate
with cost and conveyance of all above materials including
labour charges for errection of High Mast and Carraige etc
complete.
Earth work exacavation with a approximate quantity of 6.0
Cum for errection of 16 Mtrs high mast and refilling with a
quantity of 0.65 Cum of PCC 1:4:8, 2.60 Cum M 20 grade
915 ELEC-6.1.24 1 No 31980
concrete and (110 Kgs) reinforced steel of 12mm / 10mm
/ 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate
with cost and conveyance of all above materials including
241
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
labour charges for errection of High Mast and Carraige etc
complete.
242
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
300X600X170
ELEC-6.1.28
1 No 5116
d
FOUNDATION AND ERRECTION
CHARGES OF POLES
243
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
…do…. 6 Mtrs height, Bottom dia 143mm, Top 76mm,
ELEC-6.1.33 AV thickness 6mm and to withstand maximum wind 1 No 13475
c velocity 180Km/Hr
…do…. 8 Mtrs height, Bottom dia 193mm, Top 76mm,
ELEC-6.1.33 AV thickness 6mm and to withstand maximum wind 1 No 17337
d velocity 180Km/Hr
…do…. 9 Mtrs height, Bottom dia 210mm, Top 76mm,
ELEC-6.1.33 AV thickness 6mm and to withstand maximum wind 1 No 21110
e velocity 180Km/Hr
…do…. 12 Mtrs height, Bottom dia 300mm, Top 120mm,
ELEC-6.1.33 AV thickness 6mm and to withstand maximum wind 1 No 32788
f velocity 180Km/Hr
Supply and transportation of base bracket suitable for
glass reinforced polymer (GRP) composite type pole
925 ELEC-6.1.34
including labour charges etc., complete.
Makes: Bajaj / Kemrock / Sumip / Helipole
…do…. For 3 Mtrs Pole
ELEC-6.1.34
1 No 1752
a
244
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
etc., complete with cleaning with 7 tank process and
painting with powder coating including cost and
conveyance of all materials and labour charges.
METERING EQUIPMENT
6.3
Supply and erection of 0-415V Digital meter on exisiting
box / panel board including connections etc., complete.
929 ELEC-6.3.1 1 No 2266
Makes: CONZERVE / ELMEASURE / LEGRAND / MECO
/ HPL
Supply and erection of 0-415V Analog meter on exisiting
box / panel board including connections etc., complete.
930 ELEC-6.3.2 1 No 408
Makes: CONZERVE / ELMEASURE / LEGRAND / MECO
/ HPL.
Supply and erection of 0-100 / 200 / 400 / 600 /1000
Digital Ammeter of size 96x96mm on existing box / panel
931 ELEC-6.3.3 1 No 2266
board including connections etc., complete. Makes:
CONZERVE / ELMEASURE / LEGRAND / MECO / HPL.
Supply and erection of 0-100 / 200 / 400 / 600 /1000
Analog Ammeter of size 96x96mm on existing box / panel
932 ELEC-6.3.4 board including connections etc., complete. 1 No 408
Makes: CONZERVE / ELMEASURE / LEGRAND / MECO
/ HPL.
Supply and erection of Digital frequency meter on existing
box / panel board including connections etc., complete.
933 ELEC-6.3.5 1 No 4129
Makes: CONZERVE / ELMEASURE / LEGRAND / MECO
/ HPL.
Supply and erection of Digital power factor meter, 3
phase, 4 wire balanced or unabalanced load 5A, 415V of
934 ELEC-6.3.6 size 96x96mm on existing box / panel board including 1 No 2447
connections etc., complete. Makes: CONZERVE /
ELMEASURE / LEGRAND / MECO / HPL.
Supply and erection of L.T. 3phase Digital multifunction
energy meter with 3 lines LCD display for measuring all
the parameters (voltage / Current / Power / frequency /
935 ELEC-6.3.7 power factor / kw / kwh / KVAR/ KVARH/) on existing box 1 No 9083
panel board including connections etc., complete.
Makes: CONZERVE / ELMEASURE / LEGRAND / MECO
/ HPL.
Supply and erection of selector switch for voltmeter /
Ammeter on the existing box / panel including connections
936 ELEC-6.3.8 1 No 159
etc., complete.
Makes: L&T / C&S / SALZAR / HPL
Supply and erection of LED indicator lamps on the existing
937 ELEC-6.3.9 box / panel board. 1 No 122
Makes: L&T / C&S / SALZAR / HPL .
Supply and erection of LT current transformer with bar
primary 100/5A to 1000 / 5A ratio in the existing box /
938 ELEC-6.3.10 1 No 408
panel including connections etc., complete.
Makes: KAPPA
Supply and fixing of single phase Electronic energy
Meter,240V AC,50 HZ as per IS13010 up to 40A range
with 200% over load capacity complete with connections
939 ELEC-6.3.11 1 No 952
etc., complete on the existing board.
Makes: CONZERVE / ELMEASURE / MECO / HPL /
HAVELLS.
245
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of single phase Electronic energy
Meter,240V AC,50 HZ as per IS13010 up to 40A range
with 200% over load capacity complete with connections
940 ELEC-6.3.12 1 No 2752
etc., complete on the existing board.
Makes: CONZERVE / ELMEASURE / MECO / HPL /
HAVELLS.
Supply and fixing of 8 Stage APFC Relay with connection
941 ELEC-6.3.13 etc complete. 1 No 12325
Makes: L&T / Siemens / EPCOS / Schneider / Elmeasure
Supply and fixing of 12 Stage APFC Relay with
942 ELEC-6.3.14 connection etc complete. 1 No 13413
Makes: L&T / Siemens / EPCOS / Schneider / Elmeasure
Supply and fixing of 14 Stage APFC Relay with
connection etc complete.
Makes: L&T / Siemens / EPCOS / Schneider / Elmeasure
943 ELEC-6.3.15 1 No 15316
246
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Replacing old and unserviceable gasket of H. T bushing
952 ELEC-6.4.9 for the following Transformer capacity. -Upto 315 KVA 1 No 269
247
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Replacing L.T bushing rod metal parts for distribution
967 ELEC-6.4.24 Transformer by new one for the following capacities. -500 1 No 1168
KVA
Replacing L.T bushing rod metal parts for distribution
968 ELEC-6.4.25 Transformer by new one for the following capacities. - 1 No 1797
1000 KVA
Drying the repaired transformer with appropriate heat / air
969 ELEC-6.4.26 of following capacity of transformers. -Upto 315 KVA 1 No 4492
248
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 415 / 433V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage variation :
+7.5% to - 7.5% in steps of 2.5%,
19. Terminal arrangement.
a. HV: Bare Busings / Cable end box
b. LV : Cable box
20. LV : One separate terminal for earthing.
21. Impedance(Z%) : .............As per IS specification
22. Fittings & Accessories.
a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Conservator with drain plug.
e. Oil level Indicator
f. Dehydrating silicagel breather
g. Air release device
h. Drain cum filter wall
i. Explosion vent with diaphragm
j. Radiators (Attachable)
k. Seperate neutral bushing
l. Uni directional flat rollers.
... do……. 63 KVA Copper Wound Transformer with No
ELEC-6.4.34 load / Load losses (Watts): ..........As per IS specification 1 No 188644
a
249
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
by the resistance 90⁰C. complete with the following
standard mountings.
Makes: KIRLOSKAR / ESSENNAR / VOLTAMP / PETE
1. Rated KVA : ........KVA (Cast Resin)
2. Service: Indoor
3. Mounting : Floor.
4. Copper wound : Double.
5. Type of cooling : ANAN.
6. Insulation Class : Class F
7. Temparature rise by resistance : 90⁰C
8. Vector Group: Dyn 11
250
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
L T LINES ACCESSORIES AND POLES
6.5
Supply and erecting approved make 11KV, 5KA metal
979 ELEC-6.5.1 oxide lightning arrestors suitable for 11 KV supply with 1 No 1347
necessary materials on existing cross arm.
Supply and erecting porcelain disc type insulator suitable
980 ELEC-6.5.2 for 11KV line with suitable hardware on existing cross 1 No 539
arms.
Supply and erecting porcelain pin type insulator suitable
981 ELEC-6.5.3 for 11KV line with suitable hardware on existing cross 1 No 269
arms.
Supply and erecting porcelain post type insulator suitable
982 ELEC-6.5.4 for 11KV line with suitable hardware on existing cross 1 No 606
arms.
Supply and erecting porcelain pin/shackle type insulator
983 ELEC-6.5.5 suitable for L. T. 1 No 81
251
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of ESE Air Terminal of external wide area of
protection system based on proactive Early Steamer
Emission (ESE) Technology of level IV type of protection.
ESE terminal is capable to withstand Current Impulses of
40kA (5 Shots of 8/20μs wave shape), able to emit
electromagnetic impulse in the form of a controlled
993 ELEC-6.6.1 emission of steamers into the air 60 microseconds earlier 1 No 86956
than naturally formed steamers and the polarized the tip
with a voltage between 35kV & 45 kV. Having Protection
Radius Of 88 Meters. Outer body of capturing rod which is
made of Noncorrosive SS (XL 304) and having capturing
rod dia of 25mm . Make : NIMBUS / FOREND /
SCHIRTEC / THUNDER GUARD
Supply of ESE Air Terminal of external wide area of
protection system based on proactive Early Steamer
Emission (ESE) Technology of level IV type of protection.
ESE terminal is capable to withstand Current Impulses of
40kA (5 Shots of 8/20μs wave shape), able to emit
electromagnetic impulse in the form of a controlled
994 ELEC-6.6.2 emission of steamers into the air 60 microseconds earlier 1 No 105102
than naturally formed steamers and the polarized the tip
with a voltage between 35kV & 45 kV. Having Protection
Radius Of 108 Meters. Outer body of capturing rod which
is made of Noncorrosive SS (XL 304) and having
capturing rod dia of 25mm . Make : Make : NIMBUS /
FOREND / SCHIRTEC / THUNDER GUARD
Installation and commissioning of advanced lighting
protection systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
995 ELEC-6.6.3 4. Installation of Counter 1 No 26949
5. Installation of GI Mast with stay wire.
6. Installation of Earth Electrodes
7. Interconnection between the Electrodes
8. Termination of down conductor to earth bus etc
complete.
Supply of electro-Mechanical counter
996 ELEC-6.6.4 Make: CIRPROTEC / INDALAC / INGESCO / SCHIRTEC 1 No 14373
/ Thunder Guard.
Providing earth electrode of low carbon steel rod of 17mm
dia coated with 250 microns thick copper 3mtr long with
997 ELEC-6.6.5 clamps and 2 bags of earthing compound and back fill 1 No 8534
compound etc complete Make: CIRPROTEC / INDALAC /
INGESCO / SCHIRTEC / EARTH PLUS
Supply of G.I mast of 5 Meters length, 80mm + 50mm
998 ELEC-6.6.6 dia, with FRP Collar (Insulating Bush), Base Plate and 1 Set 5839
supporting Guy wire (Stay Wire) with all fixing accessories
Supply of down conductor of 1x70sqmm single core PVC
999 ELEC-6.6.7 insulated unarmoured copper conductor cable of ISI mark. 1 Mtr 503
Makes: Finolex / Polycab / Havells / RPG / RR Kabel
ADVANCED EARTHING COMPOUNDS & CHAMBERS
252
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of Bentonite powder 50Kgs bag
1001 ELEC-6.6.9 1 No 216
253
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 10 pair Telephone distribution box with back
1020 ELEC-7.1.18 mount frame, krone connector, powder coated metal body 1 No 589
with lock and key arrangement.
Supply of 20 pair Telephone distribution box with back
1021 ELEC-7.1.19 mount frame, krone connector, powder coated metal body 1 No 897
with lock and key arrangement.
Supply of 50 pair Telephone distribution box with back
1022 ELEC-7.1.20 mount frame, krone connector, powder coated metal body 1 No 1876
with lock and key arrangement.
Supply of 200 pair Telephone distribution box with back
1023 ELEC-7.1.21 mount frame, krone connector, powder coated metal body 1 No 7159
with lock and key arrangement.
Supply of 6U floor mounting net work rack with power
1024 ELEC-7.1.22 spike including all accessories. 1 No 4259
Makes: HCL / Vall.
Supply of 9U floor mounting net work rack with power
1025 ELEC-7.1.23 spike including all accessories. 1 No 5057
Makes: HCL / Vall.
Supply of 12U floor mounting net work rack with power
1026 ELEC-7.1.24 spike including all accessories. 1 No 5876
Makes: HCL / Vall.
Supply of 15U floor mounting net work rack with power
1027 ELEC-7.1.25 spike including all accessories. 1 No 6659
Makes: HCL / Vall.
Supply of 17U floor mounting net work rack with power
1028 ELEC-7.1.26 spike including all accessories. 1 No 9176
Makes: HCL / Vall.
Supply of 42U floor mounting net work rack with power
1029 ELEC-7.1.27 spike including all accessories. 1 No 38063
Makes: HCL / Vall.
Supply of 6 Core (Indoor / Out door), Single mode
1030 ELEC-7.1.28 armourd, Optic fibre cable. 1 Mtr 68
Makes: D Link / AMP / Molex / Legrand / Krone.
Supply of 12 Core (Indoor / Out door), Single mode
1031 ELEC-7.1.29 armourd, Optic fibre cable. 1 Mtr 95
Makes: D Link / AMP / Molex / Legrand / Krone.
Supply of 6 port fibre distribution unit. (FDU / LIU) loaded
1032 ELEC-7.1.30 with couplers etc complete. 1 No 6797
Makes: D Link / AMP / Molex / Legrand / Krone.
Supply of 12 port fibre distribution unit. (FDU / LIU) loaded
1033 ELEC-7.1.31 with couplers etc complete. 1 No 8609
Makes: D Link / AMP / Molex / Legrand / Krone.
Supply of Subscriber connector (SC) to SC / LC patch
1034 ELEC-7.1.32 card of 1 Mtr length. 1 No 1813
Makes: D Link / AMP / Molex / Legrand / Krone.
Supply of Pigtails for fibre core connectivity.
1035 ELEC-7.1.33 Makes: D Link / AMP / Molex / Legrand / Krone. 1 No 317
254
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of Cat 6 RJ-45 information outlets including Single
1036 ELEC-7.1.34 face plate. 1 No 227
Makes: D Link / AMP / Molex / Legrand / Krone.
RACEWAYS AND JUNCTION BOXES
Supply of 100mm x 38mm G I Raceways of 2mm thick
1037 ELEC-7.1.35 with top cover and required hard ware etc complete. 1 Mtr 413
MISSILLANEOUS ITEMS
8.1
255
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
PVC Rawl Plugs
1051 ELEC-8.1.6 100 Nos 36
50 mm 0 Gauge Nails
1056 ELEC-8.1.11 1 Doz 40
C.I.Knob
1064 ELEC-8.1.19 1 No 45
1066 ELEC-8.1.21 Stay clamp with bolts and Nuts) 1 Set 225
L.T.Guy insulator
1067 ELEC-8.1.22 1 No 54
Coil Earthing
1071 ELEC-8.1.26 1 No 63
256
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
40 mm x 40 mm x 6 mm angle iron with I bolt.
1073 ELEC-8.1.28 1 Set 220
Asbestos Sheet
1078 ELEC-8.1.33 1 Sq Mt 213
257
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
6.2 Volt series bulb (25 Nos.)
1089 ELEC-8.1.44 25 Nos 90
Cement
1095 ELEC-8.1.50 1 Kg 6
Earth work excacvation in all soils for trench, Pole Pit and
1097 ELEC-8.1.52 Earth Pit. 1 Cum 99
Cost of Sand
1098 ELEC-8.1.53 1 Cum 534
Cost of Bricks
1099 ELEC-8.1.54 1000 Nos 3431
258
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
G.I Nuts, Bolts an Washers each set
1105 ELEC-8.1.60 1 Set 10
18" dia, 2" thick CC cover for hume pipe ring with handle.
1108 ELEC-8.1.63 1 No 157
Skilled Electrician
1119 ELEC-8.1.74 1 No 540
259
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Semi Skilled Electrician / Lineman
1120 ELEC-8.1.75 1 No 420
Helper (Electrical)
1121 ELEC-8.1.76 1 No 420
Skilled Mason
1122 ELEC-8.1.77 1 No 465
Semi Skilled Mason
1123 ELEC-8.1.78 1 No 420
Skilled Welder
1124 ELEC-8.1.79 1 No 465
Skilled Fitter
1125 ELEC-8.1.80 1 No 500
Man Mazdoor
1129 ELEC-8.1.84 1 No 370
Painter Class -2
1133 ELEC-8.1.88 1 No 420
260
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of Wireless Repeater.The wireless
repeater extends the communication range of detection by
relaying data between receiver and remote wireless
1139 ELEC-9.1.2 1 No 8983
transmitter including transportation, all taxes and all labour
charges etc complete.
Makes: Cease Fire / Visonic / Honeywell.
Supply and fixing of Wireless Siren Strobe external
wireless siren - a fully supervised power code outdoor
(IP55) wireless Siren and strobe light. Designed for
external installation. Wire - Free connection between
control panel and siren. Convenient rapid no- mess
installation. Separate fire alarm signals, 98db Piezo siren
and high power strobe light. Weather resistant, IP55, 2-
1140 ELEC-9.1.3 way communication for local and remote diagnostics. 1 No 11858
Plug-in power supply, NIMH rechargeable back-up power
battery, transmits status, tamper, low- battery, supervisory
and AC loss messages to the control panel, Tri- State
tamper switch identifies screw manipulation removal of
cover or playing from the wall including transportation, all
taxes and all labour charges etc complete.
Makes: Cease Fire / Visonic / Honeywell.
Supply and fixing of wireless Fully Supervised Smoke
Detector, Photoelectric detection technology for superior
detection sensitivity , sound and transmitted for smoke,
tamper and low battery, works on power code protocol,
1141 ELEC-9.1.4 easy programming and enrolling to the control panel, long 1 No 5974
life 9 volt alkaline or lithium battery including
transportation, all taxes and all labour charges etc
complete.
Makes: Cease Fire / Visonic / Honeywell.
ADDRESSABLE - FIRE ALARM SYSTEM
9.2
261
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 10 loop
Micro processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of wall
mounting 8 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1144 ELEC-9.2.3 condition the panel shall have suitable power amplifiers for 1 No 407813
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 8 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of wall
mounting 8 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1145 ELEC-9.2.4 condition the panel shall have suitable power amplifiers for 1 No 364313
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 8 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of wall
mounting 6 loop micro processor based analog
addressable fire alarm Control panel expandable by
1146 ELEC-9.2.5 minimum 2 additional loops with minimum 80 character 1 No 367031
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
262
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 6 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of wall
mounting 6 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1147 ELEC-9.2.6 condition the panel shall have suitable power amplifiers for 1 No 328063
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 6 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of wall
mounting 4 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1148 ELEC-9.2.7 condition the panel shall have suitable power amplifiers for 1 No 245141
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 4 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of wall
mounting 4 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
1149 ELEC-9.2.8 1 No 218859
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
263
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
the hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 4 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of wall
mounting 2 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1150 ELEC-9.2.9 condition the panel shall have suitable power amplifiers for 1 No 212969
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 2 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of wall
mounting 2 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1151 ELEC-9.2.10 condition the panel shall have suitable power amplifiers for 1 No 195297
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 2 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of wall
mounting 1 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
1152 ELEC-9.2.11 LCD display 4 access levels 1000 events, historical 1 No 188500
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
264
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 1 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of wall
mounting 1 loop micro processor based analog
addressable fire alarm Control panel expandable by
minimum 2 additional loops with minimum 80 character
LCD display 4 access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
1153 ELEC-9.2.12 condition the panel shall have suitable power amplifiers for 1 No 171281
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as
per the specification and as required fixing of 1 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.
Makes: Siemens / Morley / Bosch / Ravel.
Supply, Installation, testing and commissioning of
intellegent analogue addressable Repeater panel
1154 ELEC-9.2.13 including the cost of mounting accessories complete as 1 No 106938
per specification as required.
Makes: Notifier / Edwards.
Supply, Installation, testing and commissioning of
intellegent analogue addressable Repeater panel
1155 ELEC-9.2.14 including the cost of mounting accessories complete as 1 No 90625
per specification as required.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and fixing of addressable wall mounting strobes
cum hooters including the cost of mounting accessories
1156 ELEC-9.2.15 complete as per specifications and as required including 1 No 5229
testing and commissioning.
Makes: Notifier / Edwards.
Supply and fixing of addressable wall mounting strobes
cum hooters including the cost of mounting accessories
1157 ELEC-9.2.16 complete as per specifications and as required including 1 No 4259
testing and commissioning.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and installation of addressable analogue manual
call point with resetable flexible element to initiate alaram
1158 ELEC-9.2.17 1 No 5347
including the cost of mounting accessories etc. complete.
Makes: Notifier / Edwards.
Supply and installation of addressable analogue manual
call point with resetable flexible element to initiate alaram
1159 ELEC-9.2.18 1 No 4803
including the cost of mounting accessories etc. complete.
Makes: Siemens / Morley / Bosch / Ravel.
265
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and instllation of intallegent analogue addressable
photo electric smoke detector including cost of base plate
1160 ELEC-9.2.19 etc., complete as per specification with required fittings 1 No 5256
and accessories.
Makes: Notifier / Edwards.
Supply and instllation of intallegent analogue addressable
photo electric smoke detector including cost of base plate
1161 ELEC-9.2.20 etc., complete as per specification with required fittings 1 No 4622
and accessories.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and installation of intallegent analogue
addressable rate of rise cum fixed temparature heat
detectors including the cost of base plate. 75mm dia MS
1162 ELEC-9.2.21 outlet box for fixing of the detector base, mounting 1 No 4531
accessories etc., complete as per specifications and as
required.
Makes: Notifier / Edwards.
Supply and installation of intallegent analogue
addressable rate of rise cum fixed temparature heat
detectors including the cost of base plate. 75mm dia MS
1163 ELEC-9.2.22 outlet box for fixing of the detector base, mounting 1 No 4078
accessories etc., complete as per specifications and as
required.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and installation of intalligent analogue addressable
multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box
1164 ELEC-9.2.23 1 No 5596
for fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required.
Makes: Notifier / Edwards.
Supply and installation of intalligent analogue addressable
multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box
1165 ELEC-9.2.24 1 No 4984
for fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and Installation of Intalligent analogue addressable
Control Modules including the cost of mounting
1166 ELEC-9.2.25 accessories complete as per specifications and as 1 No 4713
required.
Makes: Notifier / Edwards.
Supply and Installation of Intalligent analogue addressable
Control Modules including the cost of mounting
1167 ELEC-9.2.26 accessories complete as per specifications and as 1 No 4169
required.
Makes: Siemens / Morley / Bosch / Ravel.
Supply and Installation of Intalligent analogue addressable
monitor modules including the cost of mounting
1168 ELEC-9.2.27 accessories complete as per specifications and as 1 No 4713
required.
Makes: Notifier / Edwards.
Supply and Installation of Intalligent analogue addressable
monitor modules including the cost of mounting
1169 ELEC-9.2.28 accessories complete as per specifications and as 1 No 4169
required.
Makes: Siemens / Morley / Bosch / Ravel.
266
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and Installation of Intalligent analogue addressable
fault isolator modules including the cost of mounting
1170 ELEC-9.2.29 accessories complete as per specifications and complete 1 No 3897
as required.
Makes: Notifier / Edwards.
Supply and Installation of Intalligent analogue addressable
fault isolator modules including the cost of mounting
1171 ELEC-9.2.30 accessories complete as per specifications and complete 1 No 3147
as required.
Makes: Siemens / Morley / Bosch / Ravel.
CONVENTIONAL - FIRE ALARM SYSTEM
9.3
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1172 ELEC-9.3.1 1 No 6797
2 zone, 12V SMF batteries etc., complete with all standard
accessories. Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1173 ELEC-9.3.2 1 No 8609
4 zone, 12V SMF batteries etc., complete with all standard
accessories. Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1174 ELEC-9.3.3 1 No 11781
6 zone, 12V SMF batteries etc., complete with all standard
accessories. Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1175 ELEC-9.3.4 8 zone, 12V SMF batteries etc., complete with all standard 1 No 13594
accessories.
Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1176 ELEC-9.3.5 10 zone, 12V SMF batteries etc., complete with all 1 No 17672
standard accessories.
Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1177 ELEC-9.3.6 12 zone, 12V SMF batteries etc., complete with all 1 No 19938
standard accessories.
Makes: System Censor / Ravel / Pinnacle.
Supply, Installation, testing and commissioning of
conventional Micro processor based Fire Alarm panel with
1178 ELEC-9.3.7 14 zone, 12V SMF batteries etc., complete with all 1 No 24016
standard accessories.
Makes: System Censor / Ravel / Pinnacle.
Supply and installation of Repeater panel including the
cost of mounting accessories complete as per
1179 ELEC-9.3.8 1 No 11781
specifications and as required.
Makes: System Censor / Ravel / Pinnacle.
Supply and installation of duel tone electronic hooter of
1180 ELEC-9.3.9 85dB including the cost of mounting accessories complete 1 No 612
as per specifications and as required.
Supply and installation of dust and vermin proof manual
call point to initiate audio visual alarm including the cost of
1181 ELEC-9.3.10 1 No 589
mounting accessories complete as per specifications and
as required.
267
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and installation of response indicators for above
1182 ELEC-9.3.11 false ceiling detectors. 1 No 136
268
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 2 Kg Fire extinguisher,
stored pressure type, pressure gauge, gross wt. 3.6 kg,
empty wt.1.6 kg, Discharge time minimum 8 sec,
controllable discharge mechanism, range min. 2 mts
applicable on classes A,B, C & electrically started fire, A
rating -2 A, B rating -21 B, can construction: Deep drawn
1189 ELEC-9.4.4 1 No 3398
and Co2 mig welding, Valve construction: Forging &
Machining, internal coating of can: Epoxy powder coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all
taxes and all labour charges etc complete.
Makes: Safex / Kenex / Bharat / Reliance
Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 4 Kg Fire extinguisher,
stored pressure type, pressure gauge, gross wt. 6.9 kg,
empty wt.2.9 kg, Discharge time minimum 13 sec,
controllable discharge mechanism, range min. 4 mts
applicable on classes A,B, C & electrically started fire, A
rating -3 A, B rating -34 B, can construction: Deep drawn
1190 ELEC-9.4.5 1 No 5773
and Co2 mig welding, Valve construction: Forging &
Machining, internal coating of can: Epoxy powder coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all
taxes and all labour charges etc complete.
Makes: Cease Fire / Minimax .
Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 4 Kg Fire extinguisher,
stored pressure type, pressure gauge, gross wt. 6.9 kg,
empty wt.2.9 kg, Discharge time minimum 13 sec,
controllable discharge mechanism, range min. 4 mts
applicable on classes A,B, C & electrically started fire, A
rating -3 A, B rating -34 B, can construction: Deep drawn
1191 ELEC-9.4.6 1 No 3806
and Co2 mig welding, Valve construction: Forging &
Machining, internal coating of can: Epoxy powder coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all
taxes and all labour charges etc complete.Makes: Safex /
Kenex / Bharat / Reliance.
Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 6 Kg Fire extinguisher,
stored pressure type, pressure gauge, gross wt. 9.4 kg,
empty wt.3.4 kg, Discharge time minimum 13 sec,
controllable discharge mechanism, range min. 4 mts
applicable on classes A,B, C & electrically started fire, A
rating -4 A, B rating -34 B, can construction: Deep drawn
1192 ELEC-9.4.7 1 No 6525
and Co2 mig welding, Valve construction: Forging &
Machining, internal coating of can: Epoxy powder coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all
taxes and all labour charges etc complete.Makes: Cease
Fire / Minimax
269
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 6 Kg Fire extinguisher,
stored pressure type, pressure gauge, gross wt. 9.4 kg,
empty wt.3.4 kg, Discharge time minimum 13 sec,
controllable discharge mechanism, range min. 4 mts
applicable on classes A,B, C & electrically started fire, A
rating -4 A, B rating -34 B, can construction: Deep drawn
1193 ELEC-9.4.8 1 No 5211
and Co2 mig welding, Valve construction: Forging &
Machining, internal coating of can: Epoxy powder coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all
taxes and all labour charges etc complete.Makes: Safex /
Kenex / Bharat / Reliance.
CLEAN AGENT FIRE EXTINGUISHERS
270
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
IS:3224, high pressure 1 Mtr discharge hose & horn
complete with initial gas charged with carrying handle with
wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint
(Red) with 93% gloss with 2 years warranty Including
transportation, all taxes and all labour charges etc
complete.
Makes: Safex / Kenex / Bharat / Reliance.
Supply and fixing of Escape signage boards in Rigid
Photo luminecent based glow in Dark rigid sheet with high
1198 ELEC-9.4.13 1 No 1178
intensity luminous properties with specificaiton.
Makes: Cease Fire or its equivalent make Model-1ES01
Supply and fixing of Cease fire or its equivalent Escape
gear Mild Steel box size 425mmx360mmx140mm Epoxy
powder coated to protect it from Weathering , smoke hood
tested to Eupropean Standard EN 403 1993-S known to
reduce Carbon Monoxide, propend(acrloein), hydrogen
1199 ELEC-9.4.14 chloride, hydrogen Cyanide and Solid and liquid toxic 1 No 13594
particles to manageable level for atleast 15 minutes shall
with stand tempeartures upto 80 degrees single use only
Fire Blanket size 1.2m x1.8m used to cover any vessel
containing used to Extinguish a clothing fire wrap blanket
around the victim.
Supply and fixing of 4Nos of 9 Ltrs capacity round bottom
sand buckets along with bucket sand, Fire buckets with
1200 ELEC-9.4.15 round bottom type enamel painted, white inside & red out 1 Set 1088
side and letter FIRE inblack out side & Handle with
mounting bracket.
Supply and fixing of Fire bucket stand fabricated by M.S.
1201 ELEC-9.4.16 angles to install for two numbers of buckets as per local 1 Set 906
fire officers standards.
AEROSOL GENERATION SYSTEM (AGS) AND FIRE
EXTINGUISHERS
Supply and installation of manually operated suppression
system for all classes of fire with active substance of 3.3
kg and does cooling effect with no re-ignition. The product
is eco friendly with minimum life of 15 years . The
1202 ELEC-9.4.17 discharge time should be 25 sec and has net weight of 4.6 1 No 58906
kg and has a capacity to cover 60 m³ and is confirmed to
NFPA 2010 and other national and international
certificates.
Make: SEAARA / AGS / SALAMANDRA.
Supply and installation of Auto Detection and suppression
system used for all classes of fire with active substance of
1.6 kg. It can be connected with smoke / Heat detector
with control panel and hooter with cross zoning facility to
kill the fire and does cooling effect with no re-ignition. The
1203 ELEC-9.4.18 product is eco friendly with minimum life of 15 years . The 1 No 61625
discharge time should be 45 sec and has net weight of 4.6
kg and has a capacity to cover 21 m³ and is confirmed to
NFPA 2010 and other national and international
certificates.
Make: SEAARA / DSPA / SALAMANDRA
Supply and installation of Auto Detection and Suppression
system used for all classes of fire with active substance of
1204 ELEC-9.4.19 1 No 90625
5.7 Kg. It can be connected with smoke / Heat detector
with control panel and hooter with cross zoning facility to
271
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
kill the fire and does cooling effect with no re-ignition. The
product is eco friendly with minimum life of 15 years . The
discharge time should be 165 sec and has net weight of
10.8kg and has a capacity to cover 134 m3 and is
confirmed to NFPA 2010 and other national and
international certificates.
Make: SEAARA / DSPA / SALAMANDRA
Supply and installation of Auto Detection and Suppression
system used for all classes of fire with active substance of
3.4 kg. It can be connected with smoke / Heat detector
with control panel and hooter with cross zoning facility to
kill the fire and does cooling effect with no re-ignition.
1205 ELEC-9.4.20 The product is eco friendly with minimum life of 15 years . 1 No 77031
The discharge time should be 37 sec and has net weight
of 12.5kg and has a capacity to cover 52 m³ and is
confirmed to NFPA 2010 and other national and
international certificates.
Makes: SEAARA / AGS / SALAMANDRA
Supply & Fixing of Water Mist 9 Ltr. Fire Extinguisher :
Gross Weight – 23.9 kg., Weight of the empty firefighting
system without compressed air bottle and bottle valve-
14.9 kg., Can Height – 560 MM,Diameter – 204MM,
Weight of the gun- 1.9kg, Nominal charge- 9 Ltr., Recoil –
approx. 10N, Extinguishing Media Flow – 0.23 L/ sec,
Water Discharge Hose – 13 MM, Discharge time minimum
25 Secs, Range minimum 10 Meters, Compressed Air to
Gun – 10 MM, Applicable on Class A, B, C & Electrically
1206 ELEC-9.4.21 1 No 158594
started Fires, ARating-27A, BRating-233B, Compressed
air bottle (volume/pressure) - 2L / 300bar, Operating
pressure (dynamic) - approx 5.0 bar, Lancing distance of
the extinguishing agent-in spray Approx. 7.0 m, in jet
mode Approx, 12.0 m. Operation time- approx 40 sec,
Extinguishing enhancement agent- Foam Additive, CE
and ERDA approved, Sheet Metal Thickness – 1.5MM, 1
Year Warranty.
Makes: Cease Fire or Equivalent reputed brand.
Supply of Auto Detection and Suppression System using
Dry Sprinkler Generator as per standard composition for
all classes of fire, with a provision to connect to detect
smoke and heat with a obt/ft of 0.5 and flexibility of
adjusting it for a temperature of 57/68/93/141 degree
centigrade as per the site environment. The Discharge
1207 ELEC-9.4.22 1 No 36250
time should be 21 sec. The Generator has a net weight of
1.2 kg. Active Substance of 0.3 kg . The Generator is
suitable for Server Room, Electrical Storage and technical
appliances, important documents area & etc. approved by
NFAP2010, UL & EN.
Makes: SEAARA / AGS or equivalent
Supply of Aerosol Heat Starter Sprinkler used for Auto
Detection and Suppression System for all Class of Fire.
The heat Starter Sprinkler has various starter capacity,
which ranges from +50c to +163c. The starter can cover
up to 18 m2. The product Min Life shall be15 years. The
1208 ELEC-9.4.23 1 No 7703
output power from the Starter is 3v and current 0.6A and
operates at a temperature range of - 50c to +80c. The
Starter Sprinkler is suitable for Server Room, Electrical
Storage and technical appliances, Important documents
area etc.
272
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Makes : SALAMANDRA / SEAARA / AGS
273
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
facility with a inbuilt sounder. The control module shall
have electronic addressing. The control contact rating
shall be a minimum of 2 amps @ 24V DC (Resistive). The
control module shall operate from SLC loop power. No
external power/cable shall be used.
Makes : SALAMANDRA / SEAARA / AGS
274
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supplying , installation , testing and commissioning of
electric driven main fire pump suitable for automatic
1215 ELEC-9.5.3 1 Set 401003
operation and consisting of following : complete in all
respect as required.
a) Horizontal type, multistage, centrifugal, split casing
pump of cast iron body & bronze impeller with stainless
steel shaft, mechanical seal to ensure a minimum
pressure of 3.5 Kg / sq.cm. at highest and farthest outlet
at specified flow of 2850 lpm at 70 Mtr. head conforming
to IS 1520
b) Suitable HP SQ cage induction motor, TEFC,
synchronous speed 1500 RPM, suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55 protection for
enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
275
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
b) Suitable HP, 1500 RPM water cooled with radiator,
diesel engine conforming to relevant BS & IS standard
complete with auto starting mechanism, 12 Volts / 24 Volts
electric starting equipment, Diesel Tank, exhaust pipe
extended upto 1 m. outside pump house duly insulated
with 50mm thick glass wool with 1.0mm thick alluminium
sheet cladding, residential silencer, instruments and
protection as per specification, stop solenoid for auto stop
in the event of fault with audio indications, painted with
post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
276
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
277
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine
(Radiator cooled) 12 Volts starting system with standard
accessories
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
278
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
a) Horizontal type, multistage, centrifugal pump of cast
iron body & bronze impeller with stainless steel shaft,
mechanical seal and flow of 180 lpm at 56 Mtr head
conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type
suitable for operation on 415Volts, 3 phase 50 Hz. AC
with IP 55 class of protection for enclosure, horizontal foot
mounted type with Class-'F' insulation, conforming to IS-
325
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
279
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supplying , installation , testing and commissioning of
electric driven Terrace / Mono Bloc Booster pump suitable
1228 ELEC-9.5.16 1 Set 43478
for automatic operation and consisting of following :
complete in all respect as required.
a) Horizontal type, centrifugal End Suction pump of cast
iron body & bronze impeller with stainless steel shaft,
mechanical seal and flow of 900 lpm at 45 Mtr head
conforming to IS 1520
b) Three Phase High Speed Centrifugal Pump. Pump with
CI Impeller and Gland Packing with 9.3 KW / 12.5HP, 2
pole, TEFC, 415 V, 3ph motor
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
280
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Providing , laying, testing & Commissioning of following
classes MS pipes conforming to IS 3589 and 1239
1231 ELEC-9.5.19 including fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes
(a) 250 mm dia
a 1 Mtr 2915
(n) 40 mm dia
n 1 Mtr 460
281
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Zolotto / Valtree
282
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
1123
(c) 32 mm dia 1 No
(e) 80 mm dia
1 No 3908
283
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
synthetic enamel paint complete in all respect, for external
hydrant as required.
Supply and fixing 63mm dia Gun metal branch pipe with
20mm (Nominal internal diameter) size Gun metal / SS
nozzle conforming to IS 903, suitable for instantaneous
1242 ELEC-9.5.30 1 No 2273
connection to interconnect hose pipe coupling as
required.
Makes: Newage/ Winco/ Padmini / Safex / Minimax
Supply and fixing 4 way fire brigade connection of cast
iron body with 4 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for
1243 ELEC-9.5.31 1 No 8175
150mm dia MS pipe connection, conforming to IS 904 as
required. Makes: Newage/ Winco/ Padmini / Safex /
Minimax
Supply and fixing 2 way fire brigade connection of cast
iron body with 2 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for
1244 ELEC-9.5.32 1 No 6198
100mm dia MS pipe connection, conforming to IS 904 as
required. Makes: Newage/ Winco/ Padmini / Safex /
Minimax
Supply and fixing air vessel made of 250 mm dia, 8 mm
thick MS sheet, 1200mm in height with air release valve
on top and flanged connection to riser, drain arrangement
1245 ELEC-9.5.33 1 No 14373
with 25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with synthetic
enamel paint of approved shade as required.
Providing fixing, testing and commissioning of 15mm size
quartzoid bulb type sprinklers of rating 68º C. pendent /
1246 ELEC-9.5.34 side wall with required accessories. 1 No 440
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX
Providing and fixing of Pressure Switch in the MS pipe
1247 ELEC-9.5.35 Line including connection etc as required. 1 No 2246
Makes : Danfoss / Indfoss / Approved makes
Providing and fixing Flow Switches in 100mm dia MS
1248 ELEC-9.5.36 pipe. 1 No 4828
Makes : System Sensor / Switzer / Approved makes
Providing and fixing Flow Switches in 150 mm dia MS
1249 ELEC-9.5.37 pipe. 1 No 6737
Makes : System Sensor / Switzer / Approved makes
Supply, installation, testing and commissioning of Bourden
type, stainless steel dial type pressure gauge with
1250 ELEC-9.5.38 1 No 606
isolation valve and pipe having calibration of 0-16 kg/cm2.
MAKES: HGURU / FIEBIG and Approved makes
Supply, installation, testing and commissioning of 25mm
1251 ELEC-9.5.39 dia Gate valve 1 No 1056
Makes : Zoloto / Leader / Valtree or Approved makes
Supply, installation, testing and commissioning of 25mm
1252 ELEC-9.5.40 dia Ball valve 1 No 584
Makes : Zoloto / Leader / Valtree or Approved makes
Supply, installation, testing and commissioning of 25 /
1253 ELEC-9.5.41 20mm dia Air Release Valve 1 No 1123
284
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Providing, fixing, testing, commissioning of installation
control valve of Cast iron body and brass / Bronze working
parts comprising of water, motor alarm, bronze seat
clapper, and clapper arm, hydraulically driven mechanical
gong bell to sound continuous alarm when the Wet riser /
1254 ELEC-9.5.42 Sprinkler system activates, pressure gauges, emergency 1 No 8534
releases, strainer, pressure switch, cock valve complete
with drain valve and bypass , test control box, ball valves,
Ms pipe of required size, flanges, orifice plate, gasket etc
of size 150mm dia as required.
Makes : HD / TYCO / NEWAGE
Supplying, installing, testing and commissioning approved
make CI body Foot Valve with brass strainer with
necessary flanges, nuts and bolts etc., complete on to the
1255 ELEC-9.5.43
suction line.Rate as per the lowest quotation of Bharat
Fire Safety Engineers.
Makes:Normex & approved makes
a) 200mm nominal dia
a 1 Ea 22278
285
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply of 4 Core x 1.5Sqmm FRLS armoured copper
cable as per IS. 7098 / Part-I / 1988 including all taxes
1260 ELEC-9.5.48 etc., complete. 1 Mtr 108
Makes: Universal / CCI / Unicab / Polycab / Finolex / KEI /
Havells.
Supply of 4 Core x 2.5Sqmm FRLS armoured copper
cable as per IS. 7098 / Part-I / 1988 including all taxes
1261 ELEC-9.5.49 etc., complete. 1 Mtr 148
Makes: Universal / CCI / Unicab / Polycab / Finolex / KEI /
Havells.
Supply of 8 Core x 2.5Sqmm FRLS armoured copper
cable as per IS. 7098 / Part-I / 1988 including all taxes
1262 ELEC-9.5.50 etc., complete. 1 Mtr 247
Makes: Universal / CCI / Unicab / Polycab / Finolex / KEI /
Havells.
Supply of 10 Core x 1.5Sqmm FRLS armoured copper
cable as per IS. 7098 / Part-I / 1988 including all taxes
1263 ELEC-9.5.51 etc., complete. 1 Mtr 211
Makes: Universal / CCI / Unicab / Polycab / Finolex / KEI /
Havells.
GENERATORS SPECIFICATION
10.1
Supply, Transportation, erection and commissioning
(Excluding Foundation) of 3 Phase, 415, 50Hz, water
cooled multi cylinder diesel generator set with alternator of
- - - KVA/ - - - - - KW out put contineous rating directly
coupled Engine and Alternator with guard and mounted on
1264 ELEC-10.1.1 a common base plate of Robust construction and
complete with standard control panel having IP-52
protection, Acoustic Enclosure as per CPCB norms ,
sound absorbing material, t to restrict sound level up to
75 dB up to 1 mtr distance and as per CPCB norms etc as
per following specifications mentioned below.
A. Alternator : The alternator of the output rating shall be
3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM.
The alternator is self excited, self regulated, and shall
confirm to IS: 13364 of 1992 with regulation of +5% from
no load to full load. degree of protections shall be IP23.
Make: Kirloskar / Stamford / Crompton Greaves / Leroy
Somer
B.Diesel Engine : Kirloskar / Cummins / Mahindra &
Mahindra Diesel Engine start, developing suitable -----------
--- BHP output at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to give - - - - -
KVA continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable of providing
10% O/L for 1 Hr for every 11 Hrs of continuous running at
full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with
insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours running
capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer
standards
286
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
…..do…..15KVA, 3 Phase, 415, 50Hz, 19BHP, water
a cooled multi cylinder diesel generator set with alternator 1 No 345847
of 15 KVA out put continous rating at 0.8 p.f, Batteries.
…..do…..30KVA, 3 Phase, 415, 50Hz, 40 to 42 BHP,
water cooled multi cylinder diesel generator set with
b 1 No 444661
alternator of 30KVA out put continous rating at 0.8 p.f,
Batteries.
…..do…..40KVA, 3 Phase, 415, 50Hz, 56BHP, water
cooled multi cylinder diesel generator set with alternator
c 1 No 552458
of 40 KVA out put continous rating at 0.8 p.f, and
Batteries .
Supply, Transportation, erection and commissioning
(Excluding Foundation) of 3 Phase, 415, 50Hz, water
cooled multi cylinder diesel generator set with alternator of
- - - KVA/ - - - - - KW out put contineous rating directly
coupled Engine and Alternator with guard and mounted on
1265 ELEC-10.1.2 a common base plate of Robust construction and
complete with standard control panel having IP-52
protection, Acoustic Enclosure as per CPCB norms ,
sound absorbing material, t to restrict sound level up to
75 dB up to 1 mtr distance and as per CPCB norms etc as
per following specifications mentioned below.
A. Alternator : . The alternator of the output rating shall
be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500
RPM. The alternator is self excited, self regulated, and
shall confirm to IS: 13364 of 1992 with regulation of +5%
from no load to full load. degree of protections shall be
IP21.
Makes: Kirloskar / Stamford / Crompton Greaves / Leroy
Somer.
B.Diesel Engine : Kirloskar / Cummins / Mahindra &
Mahindra Diesel Engine start, developing suitable -----------
--- BHP output at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to give - - - - -
KVA continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable of providing
10% O/L for 1 Hr for every 11 Hrs of continuous running at
full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with
insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours running
capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer
standards
C. AMF Control Panel:- AMF control panel shall be
fabricated with 16SWG CRCA sheet shall be totally
enclosed with dust and Vermin proof, floor mounted / wall
mounted type and shall be comprising the following.
01. Voltmeter with selector switch.
02. 4 Pole MCCB incomer of ----------A rating of
Schenieder / L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
287
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers
with one mode selector switch, set of push buttons.
14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
288
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
01. Voltmeter with selector switch.
02. 4 Pole MCCB incomer of ----------A rating of
Schenieder / L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers
with one mode selector switch, set of push buttons.
14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
289
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and installation of 5.0KVA, 180 / 192V DC true on
line UPS system IGBT technology pure sine wave out put,
1272 ELEC-11.1.6 double conversion with auto and manual static by pass 1 No 61309
switch single phase input / Single phase output. Makes:
CONSUL / Power one / Numeric / Emerson / APC
Supply and installation of 7.5KVA, 180 / 192V DC true on
line UPS system IGBT technology pure sine wave out put,
1273 ELEC-11.1.7 double conversion with auto and manual static by pass 1 No 84890
switch single phase input / Single phase output. Makes:
CONSUL / Power one / Numeric / Emerson / APC
Supply and installation of 10KVA, 180 / 192V DC true on
line UPS system IGBT technology pure sine wave out put,
1274 ELEC-11.1.8 double conversion with auto and manual static by pass 1 No 99038
switch single phase input / Single phase output. Makes:
CONSUL / Power one / Numeric / Emerson / APC
Supply and installation of 10KVA, 312V DC true on line
UPS system IGBT based rectifier with input power factor
correction, 32 bit micro processor based with isolation
transformers , double conversion , SNMP controls, LCD
1275 ELEC-11.1.9 1 No 161695
Display ,Pure Sine wave output , with auto static switch, 3
phase input / 3 phase output and modular structure for
better thermal technology with warranty upto 3
years.tMakes: CONSUL / Numeric / Emerson / APC .
Supply and installation of 15KVA, 312V DC true on line
UPS system IGBT based rectifier with input power factor
correction, 32 bit micro processor based with isolation
ELEC- transformers , double conversion , SNMP controls, LCD
1276 1 No 179661
11.1.10 Display ,Pure Sine wave output , with auto static switch, 3
phase input / 3 phase output and modular structure for
better thermal technology with warranty upto 3
years.tMakes: CONSUL / Numeric / Emerson / APC .
Supply and providing of UPS cum battery rack up to 4
ELEC- batteries
1277 1 No 1347
11.1.11
290
Building SoR: 2017-18 (Civil & Electrical)
Basic RATES
SL.NO. ITEM CODE DESCRIPTION OF ITEM Unit FOR
SOR 2017-18
1 2 3 4 5
Supply and fixing of 12V 120 AH SMF battery including
ELEC- wire leads
1284 1 No 9516
11.1.18 Makes: Quanta / Racket / Exide.
Supply and fixing of 12V, 120 AH MF battery including
ELEC- wire leads
1285 1 No 9031
11.1.19 Makes: Amar Raja (Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
Supply and fixing of 12V, 150 AH MF battery including
ELEC- wire leads
1286 1 No 11555
11.1.20 Makes: Amar Raja (Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
291
GOVERNMENT OF ANDHRA PRADESH
ABSTRACT
Mines & Minerals – Amendments to Rule 10 of the Andhra Pradesh Minor Mineral
Concession Rules, 1966 – Orders – Issued.
---------------------------------------------------------------------------------------------
INDUSTRIES AND COMMERCE (M.I) DEPARTMENT
G.O.Ms.No:100 Dated:31.10.2015
Read the following:
O R D E R:
NOTIFICATION
AMENDMENTS
In the said rules, Under Rule 10 for Schedules I and II, the following shall be
substituted, namely;
“SCHEDULE-I”
RATES OF SEIGNIORAGE FEE
1 Building Stone
Rs. 75/50
10 Shingle M3/MT
(Rupees Seventy five / Fifty)
Rs. 75/50
11 Chalacedony Pebbles M3/MT
(Rupees Seventy five / Fifty)
Rs. 150
12 Fullers Earth/Bentonite MT
(Rupees one hundred and fifty)
Rs. 150
13 Shale/Slate MT
(Rupees one hundred and fifty)
Rs. 30/20
14 Rehmati M3/MT
(Rupees Thirty / Twenty)
15 Limestone Slabs:
Item Unit Super Gang Mini Gang Saw 270cmX Below 75cm
Saw above above size.
300cmX 270cmX150cm 150cm and
size. below size.
180cm size.
SCHEDULE-II
Rate of Dead Rent
Rate of Dead Rent per
Sl.
Name of the Minor Mineral hectare per Annum
No.
(in Rupees)
Rs.1,00,000/-
1 Black Granite
(Rupees one lakh)
Rs.1,00,000/-
2 Colour Granite
(Rupees one lakh)
3. This order issued with the concurrence of Finance Department vide their No.
4519/PFS/2015, Dt.12.10.2015.
M. GIRIJA SHANKAR,
SECRETARY TO GOVERNMENT (MINES & FP) (FAC)
To
The Commissioner of Printing, Stationary & Stores Purchase (Ptg. Wing), Hyderabad. (He is
requested to publish the above Notification in the Extra-ordinary issue of Andhra Pradesh,
and arrange to send 1000 copies of the same to Government in Industries & Commerce
(M.I) Department).
The Director of Mines & Geology, Andhra Pradesh, Hyderabad.
The Chief Executive Officer, SERP, Hyderabad.
All the Joint Director / Deputy Director / Asst. Director of Mines & Geology through the
Director of Mines & Geology, Hyderabad.
Copy to:
The Secretary to Govt, Ministry of Mines, GoI.
The Law (A) Department.
The Finance Department.
The P.S to Hon’ble Minister for Women Empowerment, Child Welfare and Disabled & Senior
Citizens Welfare and Mines & Geology.
The Secretary to Govt., (Mines), CM’s office.
SF/SC
//FORWARDED: BY ORDER//
SECTION OFFICER